FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 666 Tractor Parts

[Categories] [All Farmall Models] [Print]

Accessories / Supplies

Engine Block Heater - Frost plug heater with cord. 1250 watt, 120 volt, 1.240 inch diameter. Fits tractors and combines with diesel engines. Cord is 72 inches long. Fits diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 164169, Ref: 71151C91) $88.00

Belts

$Farmall 666 Belt - Generator \ Water Pump$
Belt - Generator / Water Pump - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Alternator), Compatible with International Combine (s) 715, Replaces International OEM number 403617R1, All gas engines, (Item #: 123133) $14.87

Fan Belt - For International / Farmall tractor models Hydro 70 (diesel), 666 (diesel), 686 (diesel), 5088 (diesel), 5288 (diesel), 5488 (diesel), Replaces International OEM number 65999C2, Length: 63.5", Width: 5/8", Thickness: .43", Color: Black, Material: Polyester Cord, Belt Type: Raw Edge Cogged, (Item #: 182211) $33.80

Brakes

Brake Actuating Assembly, Used - For International tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, For a new version of this item use Item #: 105442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405442) $97.01

Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70

Brake Actuator Assembly - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, (Item #: 105442) $170.00

No
Picture
Brake Disc - use 1975463c2 (Item #: 105449, Ref: 1975463C3) $20.50

Brake Disc - 6.50 inch outside diameter, 3.50 inch inside diameter, 1.84 inch spline diameter, 10 spline. For tractor models 2656, 656, 664, 666, 686, Hydro 70, Hydro 86. Replaces 391445R91, 1975463C3. (Item #: 105449, Ref: 1975463C2) $20.50

Brake Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391445, 830617, 619731, Kit Includes 2 Brake Discs, 5 Steel Balls, 3 Brake Springs, (Item #: 162744) $69.00

No
Picture
Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $116.00

Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.20

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $14.80

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.30

Clutch

Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $7.30

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-11/16 inch 16 spline, .787 inch pilot. For tractor models 460, 664, 666, 686, 3616. (Item #: 122257, Ref: S.70927) $27.00

No
Picture
Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $44.60

$Farmall 666 Clutch Alignment Tool - 1-3\32 inchx10 and 1-11\16 inchx16 Spline$
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.00

Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $18.50

Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00

Clutch Disc - 11 inch diameter, 1-3/32 inch hub, 10 spline. For tractor models 656, 664, 666, 686, 2656, 3616. (Item #: 184835, Ref: 388625R91) $185.00

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00

Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00

No
Picture
Clutch Disc, 4 Pad - For International / Farmall tractor models 656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 664 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 666 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 686 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 2656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Compatible with International Construction and industrial models 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Replaces International OEM number 388625, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 166064) $146.00

Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00

Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 203639) $167.50

Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, For a New version of this sku use Item #: 184835, (Item #: 204190) $109.00

Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 388625R93, 388625R93R, 388625HD8, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 8 Reg Pads, (Item #: 204415) $170.01

Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01

Pressure Plate Assembly - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616 (Gas, s/n 1946-later, Diesel, s/n 2118-later), Replaces International OEM number 388616R91, 11" Diameter, 1-3/4", 16 Spline, Fixed, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166080) $347.00

Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50

Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01

PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00

Remanufactured Clutch Kit - Our remanufactured clutch kit contains: a 12 inch, 16 spline, 1 5/8 inch hub, 12 spring remanufactured pressure plate assembly; a 11 inch, 10 spline, 1 3/32 hub, 4 pad remanufactured clutch disc; new release and pilot bearings. For tractors 656, 664, 666, 686, 2656 For 2656, 656, 664, 666, 686. (Item #: 202010, Ref: 388616K) $359.75

T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Cooling System

$Farmall 666 Belt - Generator \ Water Pump$
Belt - Generator / Water Pump - Outside diameter 47.77 inches, 1/2 inch v-belt. Replaces 403617R1, 372596R1, 393415R1, L71058. Used on the following gas tractors: Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Item #: 173491, Ref: 310050) $10.20

Fan Shroud, Used - For International tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 2706, 2756, Replaces International OEM nos 396356R1, Fits Farmall tractor models 706, 756, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431147) $128.01

Oil Cooler Mount Gasket - For International / Farmall tractor models 666, 686, 766, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 675513C1, (Item #: 156020) $9.90

Radiator - Core size 20.375 inches high, 20.00 inches wide. For tractor models (666, 686, Hydro 70, Hydro 86 all with diesel engine). (Item #: 101722, Ref: 65427C1) $580.00

Radiator - This radiator measures 19 1/8 inches across the fins, 20 3/8 from the top of the fins to the bottom of the fins and 2 7/8 inches wide. For tractor models 666, Hydro (serial number 10522 and up), 756 Gas, Farmall 544 Gas-Gear drive, 706 Gas (serial number 37237 and up). Also replaces 396351R9 and 403649R1. (Item #: 101717, Ref: 65426C1) $510.00

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.00

Radiator Hose Lower - Radiator hose, lower, for diesel tractors. 1-7/8 inch inside diameter. For tractor models 666, 686, 706, 756, 826, 86, HYDRO 70. (Item #: 117698, Ref: 396355R1) $19.20

Radiator Hose, Lower - Radiator hose, lower, for gas tractors. For tractor models 666, 686, 706, 756, 806, 826, 856, 86, HYDRO 70. 2 inch inside diameter, both ends. (Item #: 116660, Ref: 378704R1) $19.80

Radiator Hose, Lower - For tractor models 666, 686, 86, HYDRO 70. (Item #: 116658, Ref: 65430C1) $22.90

Radiator Hose Upper - Radiator hose, upper, for gas tractors. For 666, 686, 706, 756, 86, HYDRO 70. 2 inch inside diameter on both ends. (Item #: 116661, Ref: 396353R1) $19.60

Radiator Hose Upper - Radiator hose, upper. For 666, 686, 86, HYDRO 70 (Item #: 116655, Ref: 65429C1) $18.40

Radiator Hose Upper - Radiator hose (2 inch inside diameter), upper, for diesel tractors. For 666, 686, 756, 86, HYDRO 70. (Item #: 116807, Ref: 406766R1) $6.98

Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00

Radiator, Premium Used - For International tractor models Hydro 70, Hydro 86, 544, 666 (s/n 10552-later), 686, 706 (s/n 37237-later), 756, 766, 2544, 2756 (all Gas), Replaces International OEM number 65426C1, 396351R1, 403649R1, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101717, Additional Handling and Oversize Fees Apply To This Item, (Item #: 300304) $327.01

Water Pump - Water pump with hub installed. Heavy duty replacement with 8 vane impeller. Excellent where low cooling capacity is a problem. For diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 453, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces: 672644C95, 673162C93, 673162C94. (Item #: 100795, Ref: 673162C93) $113.00

Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $86.00

No
Picture
Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30

Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $58.00

Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Water Pump, Remanufactured, 673623C92, 675806C3 - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 666, 686, 766, 826, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 815, 1440, Replaces International OEM number 673623C92, 1928145C1, 673623C91, 673623C93, 7449909C91, Replaces International Casting number 675806C3, 675806C1, 675806C2, 677856C2, Includes mounting gasket, 4 Fin Impeller, With hub, (Item #: 205226) $103.01

Water Pump, Remanufactured, 746170C91, 318118R2 - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 2656, Compatible with International Combine (s) 615, Replaces International OEM number 746170C91, Replaces International Casting number 318118R2, 169204R1, 303394R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Press On Pulley, (Item #: 205079) $111.01

Decals and Emblems

No
Picture
Decal Set - Hood only set for 666. Black and Chrome. (Item #: 100996, Ref: R3478V) $180.01

No
Picture
Decal Set, Chassis - For model 666. (Item #: 100996, Ref: R5162) $180.01

Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10

Grille Emblem - For International / Farmall tractor models Cub (184), Hydro 70, Hydro 86, Hydro 100, Hydro 186, 140, 240, 340, 404, 424, 444, 544, 606, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, Replaces International OEM number 368523R4, Height:3-3/8", Made of die cast metal, (Item #: 108482) $51.00

Hood Ornament, Black Plastic - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. (Item #: 108485, Ref: 538005R1) $13.50

Hood Ornament, Die Cast, Chrome Plated - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. Replaces 538005R1 (Item #: 121573, Ref: 538005R1CH) $20.50

International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.60

Drive Train

1st And Reverse Slider Gear - This 1st and Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1. (Item #: 111280, Ref: 388165R1) $180.00

4th Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388151R1, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430779) $263.01

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10

Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70

Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Hand Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, (Item #: 200264) $7280.01

No
Picture
Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Foot Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 205088) $8100.01

PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00

Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01

Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01

Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00

Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20

Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $92.00

Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

No
Picture
Transmission Shift Handle Housing, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388181R2, Replaces International Casting nos 388181R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445760) $278.01

Electrical System

Alternator - Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o-clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 113608, Ref: 1100583) $121.00

Alternator - 12 volt, 61 amp. For tractor models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 serial number 8762940 to 8825000 and 8826412 and up), 2590, 2594, 3294, (1070 serial number 8675001 and up), 1270, 1370, 1570, 2670, (970 serial number 8816812 to 8817164 and 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub serial number 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 serial number 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Item #: 110572, Ref: ADR0133) $119.00

Alternator - 12 volt, 72 amp. For tractor models (453 1975-79 with 301 gas), (453D 1975-79 with 360 dsl), (715 1975-79 with 301 gas), (715D 1975-79 with 310 dsl), (815 1971-74 with V304 gas/V345 LPG), (815D 1971-79 with 414 dsl), (915 1971-74 with V392 gas/345 gas ot LPG), (1420 1978-86 with 358 dsl), (1430D 1980-84 with 358 dsl), (1440D 1974-86 with 436 dsl), (1460D 1977-86 with 436 dsl), (1480 1977-79 with 466 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (Hydro 186D 1976-81), (Hydro 686 1976-80 with 291 gas), (Hydro 686D 1976-80), (140, 140HC 1975-79 with 123 gas), (464 1975-78 with 175 gas), (464D 1977-78 with 179 dsl), (574 1975-78 with 200 gas), (574D 1977-78 with 239 dsl), (674, 674RC 1978-84 with 200 gas), (674D, 674DRC 1978-84 with 239 dsl), (686 1976-80 with 291 gas), (686D 1976-80 with 312 dsl), (766D 1971-76 with 360 dsl), (886D 1976-81 with 360 dsl), (966D 1971-76 with 414 dsl). Replaces 1102921, 1102922, 1100587, 1105573. (Item #: 110572, Ref: ADR0133) $119.00

Alternator - 12 volt, 63 amp. For tractor models (453 1972 to 1974 with 301 gas), (453D 1973 to 1974 with 360 diesel), (615 1972 to 1974 with 263 gas), (715 1972 to 1974 with 301 gas), (95 1974 to 1978 with 301 gas), (416, 422 1973 to 1978 with 263 gas/LPG or 282 diesel), (666 1972 to 1976 with 291 gas), (Hydro 70 1973 to 1976 with 291 gas), (454 1972 to 1973 with 157 gas), (464 1973 to 1974 with 175 gas), (574 1973 to 1974 with 200 gas), (766 1971 to 1976 with 291 gas), (2500A, 2500B 1972 to 1974 with 200 gas). Replaces 1100589, 1100593. (Item #: 113330, Ref: ADR0151) $120.00

Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (715D 1972-74 with 301 dsl), (95 1974-79 with 310 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (140, 140HC 1973-74 with 123 gas), (464D 1973-76 with 360 dsl), (574D 1973-76 with 239 dsl), (766D 1971-76 with 360 dsl), (966 1971-76 with 414 dsl), (1066D 1971-76 with 414 dsl), (1466D 1971-76 with 436 dsl), (1468D 1971-74 with 550 dsl), (1566D 1974-76 with 436 dsl), (1568D 1974-76 with 550 dsl), (2500A-D, 2500B-D 1972-74 with 239 dsl), (4166D 1972-76 with 436 dsl), (4366D 1973-76 with 466 dsl). Replaces 1100581, 1100578. (Item #: 111768, Ref: ADR0239) $113.00

Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00

Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.90

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.90

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.00

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60

Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1) $31.10

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $29.00

No
Picture
Starter - Delco (4271, 4282) - For International / Farmall tractor models Hydro 70 (Gas), Hydro 86 (Gas), 504 (s/n: 15261-later, Farmal Diesel), 504 (s/n: 17830-later, Diesel), 544 (Hydro, Gas), 656 (Hydro, Gas, Late s/n), 656 (s/n: 36467-later, Hydro, Farmal, Gas), 666 (Hydro, Gas), 3616 (1967-70, Diesel), Compatible with International Construction and industrial models 2504 (s/n: 15261-later, Diesel), 2504 (s/n: 17830-later, Diesel), 3514 (1967-69, Diesel), 3514 (1970-71, C173 Hydro, Gas), Replaces Case IH OEM number 369459R93, 396459R91, Replaces Delco Remy manufacturer number 1107854, 1107855, 1998496, 323-691, Replaces Starter number 4271, 4282, Lester 4271, 4282, Volts: 12, Rotation: Counter Clockwise (CC), Direct Drive, Teeth: 10, (Item #: 189419) $431.00

No
Picture
Starter - Delco (6736, 6738) - For International / Farmall tractor models 666 (Diesel, 1976-80), 686 (Diesel, 1976-80), Compatible with International Engine (s) D312 (Diesel, 1976-80), Replaces Case IH OEM number 70954C91, Replaces Delco Remy manufacturer number 1109252, 1998368, 1998486, 323-696, Lester 6736, 6738, Volts: 12, Rotation: Counter Clockwise (CC), Type: Direct Drive (DD), Teeth: 10, (Item #: 189423) $497.00

No
Picture
Starter - Delco Style DD (3934), Remanufactured, Delco Remy, 1113198, 400121R92 - For International / Farmall tractor models 544 (with D239), 656 (with D282), 666 (with D312), 2544 (with D239), 2656 (with D282), Replaces International OEM number 400121R92, Replaces Delco Remy manufacturer number 1113198, 1113187, Replaces manufacturer number 3934, 141-112, 141-112B, 91-01-4033, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 12, (Item #: 203416) $515.00

No
Picture
Starter - Delco Style DD (4236) - For International / Farmall tractor models 504, 544, 656, 666, 686, 2544, 2656, Compatible with International Combine (s) 151, 181, 615, 715, 815, 915, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 396523R92, 396523R93, 396556R92, Replaces Case OEM number 104193A1, 396522R91, A485615Z, Replaces Delco Remy manufacturer number 1108343, 1108344, 1109360, 323-635, 1998283, Replaces manufacturer number 4236, 140-746, 140-746A, 91-01-4181, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For gas applications, For a Remanufactured version of this sku use Item #: 203453, (Item #: 160374) $326.57

Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $22.90

Starter Drive - Starter drive, services Delco starter: 1113198. Tractors: 544, 656, 664, 666, 2544, 2656. 12 teeth. For 2544, 2656, 544, 656, 664, 666 (Item #: 179267, Ref: 1965788) $46.00

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

No
Picture
Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57

Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.60

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $36.00

Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $11.00

Engine Bearings

No
Picture
Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672) $28.00

Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499) $12.00

Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500) $12.90

Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545) $12.90

Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546) $21.20

Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $198.00

Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498) $12.20

No
Picture
IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $7.10

Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106621) $113.00

Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106622) $216.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106622, (Item #: 106623) $49.98

Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00

Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $111.00

Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $121.00

Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $225.00

Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $165.00

Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $89.00

Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $111.00

Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $100.00

Main Bearings - Standard - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106623, (Item #: 106620) $137.00

Pilot Relief Valve, Used - For International tractor models 544, 656, 664, 666, 686, 756, 2544, 2656, 2756, 2826, Replaces International OEM nos 389033R93, 1600 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431146) $89.01

PTO Clutch Pack, Heavy Duty - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 756, 766, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 2756, 2856, 3388, 4166, 4186, Replaces International OEM number 68802C91, 381490R4, 381489R3, Includes (10) One Sided Friction Drive Plates, (2) Steel Sealing Rings, (Item #: 169792) $175.00

No
Picture
PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40

Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20

Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.40

Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.90

Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20

Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $13.20

Engine Gaskets

Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91) $14.98

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20

Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $155.00

Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94

Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $100.00

No
Picture
Head Gasket Set - For 666, 686 with D312 Diesel Engine (Item #: 106692, Ref: HS3873) $151.00

Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.80

Oil Pan Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, D360, Replaces International OEM number 671825C2, Oil Pan Gasket Only, (Item #: 106708) $23.20

No
Picture
Overhaul Gasket Set with Crankshaft Seals - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Compatible with International Engine (s) D312, D360, D360 (Turbocharged), Set includes: head gasket set, conversion gasket set, oil pan gasket, and crankshaft seals with sleeves, (Item #: 191077) $401.00

Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $17.20

No
Picture
Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $142.00

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $22.20

No
Picture
Rear Main Seal - For 666, 686 with D312 Diesel Engine (Item #: 106660, Ref: SS47866) $26.98

Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50

Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, Replaces International OEM number 675389C1, (Item #: 158262) $16.50

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings - C291 Gas - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (3-3/4 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. Note: For engines with bore classification markings 1 or 2. Crankcase bore classifications are stamped on top of filter base mounting pad. ENGINE BEARINGS AND PIN BUSHINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130609, Ref: BEKH1189-LCB) $615.00

No
Picture
Basic In-Frame Engine Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189592, Ref: BIFH1189) $547.00

Cylinder Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (6 Cylinder Diesel), Replaces International OEM number 671513C95, (Item #: 166503) $150.00

Cylinder Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number A77691, 675356C2, Bore: 3.875", (Item #: 156084) $70.00

Engine Rebuild Kit - Less Bearings, D312 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (diesel), Bore: 3.875", Stroke: 4.410", Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106623, (Item #: 130610) $1129.01

Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $263.00

Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6 cylinder, C263, C291, C301). Kit includes valves (Stellite Exhaust Valve), valve springs, valve keys, valve guides. (Item #: 120320, Ref: VOKH263S) $332.00

Engine Parts

1st and Reverse Sliding Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388165R1, Teeth: 57, Splines: 14, For a new version of this item use Item #: 111280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411280) $77.01

3rd Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388150R1, Teeth: 37, Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409376) $153.01

Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01

Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $286.00

Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01

No
Picture
Camshaft, Remanufactured, 675625C91 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Replaces International OEM number 675625C91, (Item #: 207148) $660.01

Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00

Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743) $5.90

No
Picture
Connecting Rod, Used - For International tractor models Hydro 70, 666, 766, Compatible with International Engine(s) D312, D360, Replaces International OEM nos 672116C91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434324) $66.01

Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01

Constant Mesh Gear, Used - For International tractor models 656, 666, 686, 2656, Replaces International OEM nos 388152R1, Teeth: 59, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429970) $204.01

Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92) $276.00

Crankshaft, Remanufactured, 320185R, 367267R - For International / Farmall tractor models 560 (with C263, C291 or D282), 656 (with C263, C291 or D282), 666 (with C291), 686 (with C291), 706 (with C263, C291 or D282), 756 (with C291), 766 (with C291), 806 (with C301), Replaces Casting number 320185R, 367267R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Additional Handling and Oversize Fees Apply To This Item, (Item #: 200249) $780.01

No
Picture
Crankshaft, Remanufactured, 675707C - For International / Farmall tractor model 666, Compatible with International Engine (s) D312, Replaces Casting number 675707C, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200250) $720.01

Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30

No
Picture
Cylinder Head, Remanufactured, 378240R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 378240R, Casting No. 378240R, Engines C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205503) $1100.01

No
Picture
Cylinder Head, Remanufactured, 380938R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Casting No. 380938R, 382099R, Engine C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205502) $660.01

No
Picture
Cylinder Head, Remanufactured, 387972R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 387972R, 383666R, 387718R, Engine C-221, C-263, C-291, Cylinders 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200211) $1225.01

Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205502, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405502) $332.01

Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 387718R, 383666R, 387972R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200211, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400211) $315.01

Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.10

No
Picture
Flywheel With Ring Gear - For International / Farmall tractor models 656 (gas engine with gear drive), 666 (gas engine with gear drive), 686 (gas engine with gear drive), Replaces International OEM number 396420R91, Size: 11", Step: 1.437", Teeth: 133, Engine: C-263, C-291, (Item #: 122027) $771.00

Flywheel With Ring Gear - For International / Farmall tractor models 666 (Gear Drive), 686 (Gear Drive), Replaces Case IH OEM number 282208A1, 680712C91, Engine: D-312, Additional Handling and Oversize Fees Apply To This Item, (Item #: 159127) $1039.01

Mechanical TA Back Gear - For International / Farmall tractor models 656, 666, 686, Replaces International OEM number 389156R1, (Item #: 111215) $236.00

Piston Pin Bushing - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number 675899C1, (Item #: 160343) $16.30

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40

Ring Gear, Flywheel - Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear and Hydro Drive with D-188 Engine serial number 13676->), 544 (with C-200 Engine), 656 (Gear and Hydro Drive with C-263 engine/Hydro Drive with D-282 Engine, 666 (Gear and Hydro Drive with C-291 Engine/Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL/CONSTRUCTION: 2504 (gear and Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear and Hydro Drive with D-188 Engine, 3514 (with Synchromesh Transmission with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5/16 inch inside diameter and .485 inch width. (Item #: 116898, Ref: 396421R1) $61.00

Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00

Second Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388149R1, Teeth: 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496798) $204.01

Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $156.00

No
Picture
Tach Drive Gear, Used - For International tractor models 666, 686, 766, 966, 1066, 1466, 1486, 1566, 3388, 3588, 3788, 4166, 4366, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 676938C1, Teeth: 32, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443199) $116.01

TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01

Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $201.00

No
Picture
Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $184.00

Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00

Torque Amplifier Drive Shaft, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 360676R51, Splines: 10/ 14, Diameter: 1.128", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436810) $231.01

Valve, Exhaust - Price shown is for (1) exhaust valve. Stellite Faced Valve. Fits models: 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 128502, Ref: 372699R3) $23.80

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

Valve, Intake - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 191128, Ref: 234276R1) $16.50

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $58.00

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2656, 2706, 2756, 656, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH263S) $124.14

No
Picture
Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70

Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80

Valve Train Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Engines: D312, D360 Diesel, (Item #: 120321) $300.00

Valve Train Set - For International / Farmall tractor models 656, 666, 686, 706, 756, 766, 2656, 2706, 2756, Replaces International OEM number 237248R1, Replaces Intake Valves 234276R1, Exhaust Valve 372699R3, Valve Springs 367192R1, Valve Guides 535229R1, 237248R1, Valve Keepers 33K701, Stellite Exhaust Valves, (Item #: 114736) $279.17

Engine Pistons and Sleeves

Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $6.50

Sleeve and Piston Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Sleeves, pistons and rings, pins and retainers. For 3-3/4 inch standard bore. Kit contents for 1 engine. (Item #: 184188, Ref: PK189) $782.00

Sleeve and Piston Set - Used on C291 gas engines, Contains sleeve, stepped head piston, rings, pin and retainer for one cylinder. For 3-3/4 inch standard bore. (Item #: 395356R93) $67.04

Engine Rings

No
Picture
Piston Ring Set - Ring set for a 3 ring piston and is a set for 6 pistons, 1 used per engine. For C291 CID gas 6 cylinder engine with a 3 3/4 inch bore. Contains 1 compression 1/8, 1 compression 3/32 and oil ring 1/4 for each cylinder. For 2706, 2756, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86 (Item #: 178267, Ref: PRS189) $136.00

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 120867, (Item #: 174316) $145.00

Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Piston Ring Set - Standard - 6 Cylinder use Item #: 174316, (Item #: 120867) $26.30

Exhaust System

Exhaust Manifold Nut - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682987C1, Replaces Case IH OEM number 63460D, 43715D, (Item #: 168629) $2.20

Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $33.00

Exhaust Manifold Stud - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682840C1, 63459D, (Item #: 168630) $4.80

Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $23.70

No
Picture
Manifold - Exhaust manifold, for gas powered tractors. For 2706, 2756, 2826, 2856, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86 (Item #: 101556, Ref: 384290R21) $234.00

Manifold - For International / Farmall tractor models Hydro 70, Hydro 86, 606 (use pipe adapter125212), 656 (use pipe adapter 125217), 666, 686, 706, 756, 766, 806, 826, 856, Replaces International OEM number 367281R1, 384290R2, 85699R1, Engines: C221 (use pipe adapter 125212), C263 (use pipe adapter 125212), C282, C291, C301, Completely assembled 2-piece assembly contains OEM heat spring, 2-1/2" NPT threaded pipe outlet, Application information, This completely assembled 2-piece intake and exhaust manifold is easier to install! Our 121565 2-piece manifold with heat spring eliminates the need to match the flanges of a used manifold to half of a new manifold, Please order 113422 exhaust pipe unless you have a 460, 560, 606, 660, 2606 or 3616, If you have a 460, 560, 606, 660, 2606 or 3616, then you need an exhaust adapter. Please view: 125212 adapter. This adapter offsets the exhaust hole to align with the hood of the tractor and also steps down the pipe diameter to 2" NPT. These tractors use 126744 exhaust pipe, If you have a 656 or 2656, then you can use the 113422 exhaust pipe, however the exhaust pipe is not perfectly centered on the exhaust hole in the hood. Also, you need to have the inlet pipe on the muffler expanded to accommodate this larger diameter pipe or you need to purchase 100824 muffler, If you need to adjust the pendulum (121566) on the intake manifold, please use a Torx T8 screwdriver or bit, (Item #: 121565) $490.00

Manifold - This Manifold for gas intake with heat valve assembly is for models 460, 560, 656, 666, 706, 756, 806, 826, 856, 2756, 2826, 2856, Hydro 70, Hydro 86. Replaces OEM number 393705R11. (Item #: 101554, Ref: R2661) $216.00

Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00

No
Picture
Manifold Gasket Set - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 eng. (Item #: 101555, Ref: R0057G) $27.50

Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.30

Manifold Heat Control Weight - Made of cast iron. For gas Models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856. (Item #: 121566, Ref: 85699R1) $23.70

Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $216.00

No
Picture
Muffler - For International / Farmall tractor models 666 (with D312 diesel), 686 (with D312 diesel), Replaces International OEM number 66727C2, Inlet I.D.: 3-1/8", Length: 15", Additional Handling and Oversize Fees Apply To This Item, (Item #: 124251) $156.00

Muffler - Vertical Exhaust inlet inside diameter 2 15/16 inches, outlet outside diameter 3 inches, overall length 34 inches. For 666, 686, 706, 766, Hydro 70, Hydro 86 with C263 or C291 Gas Engines, 706 with D310 Diesel Engine, 806 with C301 Gas or D361 Diesel, 826, 856 with C301 Gas Engine, 856 with D407 Diesel Engine. OEM numbers 570578R3, 530578R4 use R1756 clamp, use R1805 rain cap. (Item #: 100824, Ref: R1650) $130.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.30

No
Picture
Air Cleaner Intake Hose, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 2544, 2706, 2756, 2806, 2826, 2856, Replaces International OEM nos 380035R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443222) $39.01

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Farmall / International it fits: [ 2404, 2424, 2444, 2504, 2544, 2656, 330, 340, 404, 424, 444, 454, 464, 504, 544, 574, 656, 666, 674, 686 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ], [ 2826, 664, 826 (For diesel fuel shut off cable bracket) ], [ Industrial: 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3514, 4500A, 4500B, 8000 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ]; Replaces: 373373R1, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 464, 504, 544, 656, 574, 666, replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, 934SL, 974SL, TSX984SL. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $465.00

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: 666, 674. Replaces Marvel-Schebler numbers TSX394, TSX777, TSX974, TSX975, TSX980, TSXU839, TSXU995. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA. 1 year warranty. (Item #: 100750, Ref: 14997) $560.00

Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs. Replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, TSX934SL, TSX974SL, TSX984SL. International part numbers 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91 Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty. (Item #: 183805, Ref: 14996B) $310.00

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: F504. Replaces 377234R94. For 101, 303 replaces 383128R91 and 12758. For I544 replaces 405030R91. For F666 used on C-291 engine, replaces 65486C93. Also replaces numbers 405530R91, 534475R92, 67836JC92, 678478C91, 65486C93. Also replaces Zenith number 12758. New Zenith Carburetor with 2 11/16 inch center-to-center on 2 mounting bolts. Made in USA. 1 year warranty. (Item #: 100765, Ref: 12994) $505.00

Carburetor Float - For tractor models 105, 203, 210, 230, 2500A, 2500B, 275, 375, 454, 464, 504, 544, 574, 656, 666, 686, HYDRO 70, HYDRO 86, ALL WITH MARVEL-SCHEBLER LARGE BOWL CARBURETORS. 381962R1 (Item #: 105095, Ref: R2383) $19.50

Carburetor Kit, Basic - Kit for Zenith 12758, 12685, 13384, 13396, 13588, 13716 carbs on 2504, 2544, 3514, 504, 544, 574, 666, 674, 686. (Item #: 100741, Ref: Z104) $23.60

Carburetor Kit, Basic - Kit for Marvel TSX934, TSX959, TSX857, TSX927, TSX974, TSX975 carbs used on 2544, 3514, 504, 544, 574, 656, 666, 674, 686. (Item #: 100734, Ref: MS102) $15.30

Carburetor Kit, Complete - This Complete Carburetor Kit is for Marvel-Schebler #s: TSX974SL, TSX980, TSX974 - Includes Basic Kit, plus Fuel and Air Adjusting Screws and Jets. ***Must Reuse Nozzle*** (Item #: 131596, Ref: R7894) $43.90

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX974. For the following tractor models: 666. Center-to-Center on the mounting bolts is 2 5/8 inches. Add $100.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 203330, Ref: 1447-CARB) $302.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13716. For the following tractor models: 666. Add $150.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 205070, Ref: 1448-CARB) $235.01

Choke Cable - For International / Farmall tractor models 300, 350, 656, 666, 686, 706, 756, 826, 2656, 2706, 2756, 2826, Replaces International OEM number 363709R95, Overall Length: 63", Mount to Mount: 60", (Item #: 113539) $20.30

Fuel Injection Pump, Remanufactured, Ambac, 6A-100A-9238-4, 684529 - For International / Farmall tractor models 666 (M100 Pump, D312 with Gear Drive Transmission), 686 (M100 Pump, D312 with Gear Drive Transmission), Replaces International OEM number 684529, 680-345, 684-529, 749-022, 680345, 749022, Replaces Ambac manufacturer number 6A-100A-9238-4, 6A-100A-9265-1, (Item #: 200766) $1635.01

Fuel Injection Pump, Remanufactured, Ambac, 6A-100A-9238-5, 684528 - For International / Farmall tractor models Hydro 70 (D312), Hydro 86 (D312), 666 (D312), Replaces International OEM number 684528, 680-346, 984-2, 684-528, 749-023, 749023, 680346, Replaces Ambac manufacturer number 6A-100A-9238-5, 6A-100A-9265-2, (Item #: 200765) $1635.01

Fuel Injector, Remanufactured, 631570C91, 675960C91 - For International / Farmall tractor models Hydro 86 (Using D312 engine), 666 (Using D312 engine), 686 (Using D312 engine), 766 (Using D360 engine), Replaces International OEM number 631570C91, 675960C91, (Item #: 207291) $210.01

Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $45.00

Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $175.00

No
Picture
Injector - Fuel injector assembly, remanufactured. For 1066, 1086, 1440, 1460, 1466, 1480, 1486, 1566, 1586, 3488, 3688, 4166, 4186, 4366, 4386, 453, 666, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 160139, Ref: 631571C91-EX) $59.00

Insulating Fuel Tank Pad - For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: 424 (late), 444 (late), 454, 504 (late), 544, 574, 656, 666, 674, 686. Replaces 392096R91. (Item #: 179751, Ref: C3NN9D532A) $6.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.30

Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $8.10

Gaskets

Fuel and Temperature Combo Gauge - Gauge combination DOES NOT HAVE IH Logo. Used on models (706, 806, 1206, 826 diesel), 544, 656, (756 diesel), 664, (666 diesel), 4166, (686 diesel), 4186, Hydro 70, Hydro 86, Ind. (2706, 2806, 21206, 2826 diesel), 2544, (2656, 2756 diesel). SPADE terminals. Uses a 5/8 inch x 24 thread probe, Replaces 1546480C1, 396380R91, 539293R1, 382733R93, 396380R91, 397939R92, 1546480C1 (Item #: 108043, Ref: 396380R91) $110.00

Gauges

Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $40.60

Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $45.00

Fuel Sending Unit - This Sending unit operates from 32 Ohm full to 244 Ohm empty. It will not work work with 0-70 Ohm fuel gauges. It is for 12 volt systems. Use with Stewart Warner Fuel Gauges like 533992R1. Replaces: 378427R91, 84203050 (Item #: 107954, Ref: 378427R91) $45.00

Speedometer Cable - This Speedometer / Tachometer cable is used on Hydro 70, Hydro 86, 544, 656, 666, 354, 434, 364 tractors. It measures 45-1/8 inches long. Both ends have 5/8 - 18 fittings. Replaces 3068984R91, 3068984R92, 398955R91, 398955R92, 398955R93 (Item #: 122467, Ref: 3068984R91) $39.00

Tachometer - Tachometer assembly complete. Tractors: following tractors with HYDRO TRANSMISSION: 544, 656, 666, 826, 966, 1026, 1066, Hydro 70, Hydro 86, Hydro 100 (Gas/Diesel). Replaces 398957R1, 402033R1, 65324C1. (Item #: 121657, Ref: 534055R1) $210.00

No
Picture
Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $27.74

No
Picture
Tachometer Cable - This tachometer cable is 58 3/8 inches long for models: Hydro 84, 3514 with C175 gas, (385, 484, 485, 584, 684, 784, 785, 884 all without cab), (666, 686, 706, 756, 766 806, 826, 856 all with gas), 544 rowcrop with gas, 656 gas or diesel, (hydros 2400, 2500, 454, 464, 574, (585, 685, 885 without cab. Replaces 393326R92, 529234R1. (Item #: 111325, Ref: 384843R91) $27.74

Tachometer Cable - Used on International models" Hydro 70, Hydro 86, Hydro 100, 666 (Gear Drive), 766, 786, 806, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 2806, 2856, 3088, 3288, 3688, 4166, 4186, 4366, 21026, 21256, 21456. This cable measures 80 inches. 5/8 - 18 thres on one side, 7/8 - 18 thread on the opposite. Squared ends. Replaces International OEM nos 393328R93, 384845R92, 387916R91, 393328R92, 393328R91 (Item #: 107953) $28.40

Tachometer Cable - For International / Farmall tractor models 600, 650, 666 (Diesel with D310 Engine), 766 (Diesel with gear Drive), 806 (Diesel with gear Drive), 856 (Diesel with gear Drive), 1026 (Diesel), 1206 (Diesel with gear Drive), 1256 (Diesel), 1256, 1456 (Diesel with gear Drive), 2856 (Diesel with gear Drive), 3088 (Diesel), 3288 (Diesel), 4166 (Diesel), 4186 (Diesel), 4366 (Diesel), 21026, 21256, 21456 (Diesel with gear Drive), Replaces International OEM number 384845R92, 387916R91, 393328R91, 393328R92, 393328R93, 341210C91, 89159R91, Length: 80", Load End:, Drive End:, Metal Sheath, 5/8 - 18 x 7/8 - 18 threads with square on both ends, For Nylon Sheath Cover use Item #: 115094, (Item #: 115095) $34.50

Tachometer Cable - For International / Farmall tractor models Hydro 70, Hydro 86, 666 (Gear Drive), 686 (Gear Drive), Replaces International OEM number 65325C93, Length: 76", Load End:, Drive End:, (Item #: 121532) $41.50

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $66.00

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $23.20

Hitch / Drawbar

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.40

Drawbar Brace Rod - For International / Farmall tractor models H (s/n 36680-later), M (s/n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666, Replaces International OEM number 57233DA, Forged, 17-1/4" C.C. hole, (Item #: 126337) $65.00

Drawbar, Front Tube - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, Replaces International OEM number 389100R11, Tube length: 25.50", (Item #: 170028) $258.00

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $16.10

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Drawbar Support Casting - Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1/2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1. (Item #: 108818, Ref: 389360R1) $402.00

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $114.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $33.00

Inner Pipe - Associate parts for this Inner Pipe are 384852R1 Pin, 389369R1 Yoke, 389370R11, Lockout pin, 400836R1 Clevis. It is used on International models Hydro 70, Hydro 86, 544 (1/1966 - 12/1973), 656 (1/1966 - 12/1973), 664 (1/1972 - 1/1973), 666 (1/1972 - 1/1973), 686 (1/1969 - 12/1971), 2544 (Diesel), 2656 (1/1963 - 12/1971). Replaces 400835R1 (Item #: 108821, Ref: 400835R1) $64.00

Latch, Telescoping Lift Arm - For Cat II 3 point hitch. Models: 100, 1026, 1066, 1086, 1206, 1256, 130, 140, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 986. Lower latch spring 382192R1 and upper latch spring 382193R1 are available separately. (Item #: 109475, Ref: 398373R1) $28.50

Lateral Limiter Clevis - Used in association with 384852R1 Pin, 389369R1 Yoke, 389370R11 Lockout pin and 400835R1 Inner pipe, this Three Point Lateral Limiter Clevis measures 7.310 inches long. It is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108851, Ref: 400836R1) $173.00

Leveling Assembly Kit - Consisting of one each of the following, 523861R2 handle, 223315 duckhead, 389542R11 screw, 538970 (housing 16.750 inches long), this kit is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 128562, Ref: 223306) $211.00

Leveling Screw Assembly - Measuring 25.500 inches this leveling screw has a 1.000 inch diameter and 6 inches of threads. It is used with 223315 - Duckhead Pivot Assembly, 523861R2 - Crank Handle and 538970R1 Leveling Screw Housing (each sold individually). Used on Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 108836, Ref: 389542R1) $43.30

Leveling Screw Housing - Used on both 2 point and three point hitches, this part is used with 389542R11 Screw. It is 16.750 inches long and threaded for a 1 inch screw. Replaces 538970R1, 389538R1. Used on Hydro 70, 544, 656, 664, 666, 686. (Item #: 108815, Ref: 538970R1) $70.00

Lift Arm Crank Handle, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 100, 130, 140, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 523861R2, For a new version of this item use Item #: 108883, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408883) $5.26

Lift Arm Latch - This Lift Arm Latch is used on 2504 Indust/Const, 2544 Indust/Const, 2606 Indust/Const, 2656 Indust/Const, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86. It replaces 380993R2, 380993R1 (Item #: 111394, Ref: 380993R2) $34.20

Lift Arm Latch, Used - For International tractor models Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM number 398373R1, Use with Lower Spring - 109644 and Upper Spring - 108835, For a new version of this item use Item #: 109475, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409475) $17.01

Lower 3 Point Latch Spring - Four of these are used per tractor. Sold individually. This part Measures 0.075 inches thick, 5.896 inches length, 0.325 inch hole diameter and tapers 0.200 to 0.755 inches width. This part ships bare metal. Replaces 380992R1, 392882R1 (Item #: 155918, Ref: 392882R1) $14.80

Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01

Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $1.98

No
Picture
Rear Drawbar Support, Used - For International tractor models 544, 656, 666, 2544, 2656, Replaces International OEM nos 391101R1, For Fast Hitch Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496573) $204.01

Stabilizer Control Arm - International Tractors Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 all use this Stabilizer Control Arm on Three Point Hitches. (Item #: 127417, Ref: 389362R1) $226.00

Stabilizer Control Arm, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389362R1, For a new version of this item use Item #: 127417, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427417) $134.01

Stabilizer Eyebolt, Rear - Used on Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, this Eyebolt replaces International part number 389371R1. (Item #: 152201, Ref: 389371R1) $33.80

Stub Drawbar - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1/4 inches long, 2-1/2 inches wide and 1-1/2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1 (Item #: 110316, Ref: 389099R1) $144.00

Sway Limiter Lockout Pin - Part number 389370R11, Sway Lockout Pin, is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108853, Ref: 389370R11) $8.50

Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.70

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Item #: 1000051, Ref: IHS3009) $1799.99

Three Point Lateral Limiter Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389369R1, (Item #: 108852) $3.98

Three Point Stabilizer Front Eyebolt, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 382390R1, Used on Front or Rear Yokes, For a new version of this item use Item #: 108857, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408857) $17.76

Top Link Bracket - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686, this new Top Link Bracket replaces part number 389372R41 (Item #: 109483, Ref: 389372R41) $167.00

Hydraulic System

No
Picture
Gasket and O-Ring Kit - For International / Farmall tractor models 656, 666, 686, Replaces International OEM number 370893R2, 364885R1, 364839R1, 368269R1, Kit includes: 370893R2 Gasket, 364885R1 O-Ring, (2) 364839R1 O-Rings, (4) 368269R1 O-Rings, (Item #: 176768) $26.20

Hydraulic Filter - Hydraulic oil filter, for gear drive tractors with pumps up to 12 gpm. Not for hi-capacity power supply. For tractors: 340, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. (Item #: 111116, Ref: 388084R93) $36.00

Hydraulic Pump - For International / Farmall tractor models Hydro 186, 664, 666 (need gasket and O-ring), 686 (need gasket and O-ring), 706, 756, 766, 786, 806, 826, 856, 886, 966 (need gasket and O-ring), 986 (s/n 24000-earlier, 28000-later), 1026, 1066, 1086 (s/n 47999-earlier, 55000-later), 1206, 1256, 1456, 1466, 1468, 1486 (s/n 26000-earlier, 29150-later), 1566, 1568, 1586 (s/n 21000-earlier), 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388 (need conversion kit), 3588 (need conversion kit), 3688, 3788 (need conversion kit), 6388 (need conversion kit), 6588 (need conversion kit), 6788 (need conversion kit), 21026, 21206, 21256, 21456, Replaces International OEM number 1949300C1, 70932C91, Main Hitch Hydraulic Pump, Open back to accept piggy-back pump, Backplate and gasket not included, 15 GPM, Max PSI: 2100-2500, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Pump Conversion Kit when needed use Item #: 111636, (Item #: 155066) $530.00

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $380.00

Hydraulic Pump, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560 (application), 606, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, 1026, 1456, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3488, 21026, 21456, Replaces International OEM number 70935C91, 373966R94, 1949292C1, 527755R91, For 560 application, pump must be open on back side to accomodate piggyback pump., 17 GPM, For a new version of this item use Item #: 104237, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404237) $206.01

Knob, Hydraulic Position Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 166950, Ref: 382801R1) $11.70

Knob, Hydraulic Sensitivity Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 128572, Ref: 382805R1) $7.80

Remote Coupler, Remanufactured, 536761R91 - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 100, Hydro 186, 544, 606, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Replaces International OEM number 536761R91, 544786R3, 544786R91, 544786R92, 544786R94, 544786R95, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 207002) $949.01

Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $450.01

Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.40

Headlight Washer - Used with light part number 164089AS. Replaces 388947R1. For the following tractors: 806, 1066, 2606, 2706, 2756, 2806, 2826, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 786, 886, 986, 1086, 1486, 1586, 21456, 21256, 21206 (Item #: 154899, Ref: 504781M1) $5.30

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.00

Light Switch, 12 Volt, 4 Position - For tractor models 1026, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1066, 1456, 1466, 1468, 1566, 1568, 4166, 4186, 4366, 4386, Hydro 70, Hydro 86, Hydro 100. (Item #: 111900, Ref: 403571R1) $39.00

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Miscellaneous

Gear Shift Knob, Rubber - For International / Farmall tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388182R1, SHAFT 0.840" HOLE, BASE 1.900" HOLE, 2 1/4" TALL, (Item #: 124171) $14.60

Gear Shift Shaft - For International / Farmall tractor models 544 (s/n 14519-later), 656 (s/n 45579-later), 666, Replaces International OEM number 534120R91, Length: 14.500", Pin Diameter: 1.125" Across Pins, Pin Size: .312" (square), Shaft Diameter: .750", (Item #: 163526) $123.00

Hydraulic Valve, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1026, 1066, 1456, 2544, 2656, 2756, 2826, 2856, 4156, 4166, 4186, 4366, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 383267R94, 529910R93, 383267R91, 383267R92, 383267R93, 529910R91, 529912R91, 529912R92, 529910R92, Opened on both sides, Open Center Hydraulic Sysyem, For a Remanufactured version of this part use Item #: 206999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498240) $555.01

O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50

O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90

No
Picture
Shifter Rail, 2nd and 3rd Speed, Used - For International tractor models 656, 664, 666, 686, 2656, Replaces International OEM nos 65718C1, 2nd and 3rd Speed Shifter Rail, Length: 16 1/8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434310) $49.01

Torque Amplifier Carrier, Remanufactured, 361281R13 - For International / Farmall tractor models Super MTA, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, For a New version of this sku use Item #: 151955, (Item #: 204411) $166.91

No
Picture
Transmission Shift Actuating Link - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), 544 (1/66-12/73), 656 (1/66-12/73), 664 (Diesel, 1/72-12/73), 666 (1/72-12/72), 686 (1/69-12/72), 2544 (Diesel), 2656 (1/63-12/71), Replaces International OEM number 388201R11, (Item #: 173872) $87.00

Oil System

Oil Filter - Oil filter element, spin on type. Approximate diameter 7.17 inch height, 3.69 inch outside diameter. For diesel engines: D282. D312, D and DT414, D and DT 436, D and DT466. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 2656, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 5088, 5288, 5488, 6388, 656, 6588, 666, 6788, 686, 7288, 7488, 815, 85, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111132, Ref: A184775) $15.30

Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $10.10

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Oil Pump Assembly - This complete oil pump assembly comes as picture and is for tractor models 606, 2606, 560 engine serial number 32243 and up, 656, 660 engine serial number 32243 and up, 706, 2656, 2706, Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756, 806, 826, 856, 2806, 2826, 2856, 3309, 340, 560 engine serial number 42218 and up, 660 engine serial number 42218 and up, 706 engine serial number 51721 and below, 2706 engine serial number 51721 and below. FOR THE FOLLOWING ENGINES ONLY: C221, C263, C282, C291, C301, UB220, UB240 gas and LP engines and BD220, BD240, D166, D188, D236, D282, D301 diesel engines. Does not include pick-up screen. Replaces 230421R91, 308366R91, 379138R1, 379138R91. (Item #: 121773, Ref: 379138R91) $416.05

PTO / Driveline

Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $20.90

No
Picture
IPTO Drive Shaft Bearing Cage, Used - For International tractor models 504 (Gas and Diesel), 544, 656, 664, 666, 686, 2504, 2544, 2656, Replaces International OEM nos 388674R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441548) $176.01

IPTO Front Drive Shaft, Used - For International tractor models 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 389535R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441425) $135.01

PTO Assembly, Remanufactured, 389119R92 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, Replaces International OEM number 389119R92, Single Speed Unit, 540RPM, (Item #: 204429) $955.01

PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $48.98

PTO Control Boot - For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 118607, Ref: 393071R2) $6.00

PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51

PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00

PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $275.01

PTO Knob - For tractor models 544, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 112393, Ref: 387885R1) $9.20

PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.80

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.00

No
Picture
PTO Shaft Seal Kit - This PTO Shaft Seal Kit includes bearings, seals and O-rings. For tractor models: 2606, 2656, 460, 544, 606, 656, 664, 666, 686. All with Torque Amplifier. (Item #: 180732, Ref: R2990) $79.00

PTO Shield - Two Piece For 06 Series thru 86 Series with Dual Speed PTO. OEM# 1264520C1 1264503C1 (Item #: 103968, Ref: R0907) $79.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.00

Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $602.87

Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $940.00

Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00

Seat Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 109272, Ref: R0866) $182.00

Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $213.00

Seat Back - Black Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066. Replaces 387174R92, 387175R1 (Item #: 127286, Ref: R0869) $221.00

No
Picture
Seat Bottom - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178455, Ref: R0865) $292.00

No
Picture
Seat Bottom - Black and White Vinyl on Wood For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178468, Ref: R0986) $146.00

Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $56.00

Seat Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Compatible with International Hay Cutting(s) 275, 375, Replaces International OEM nos 379321R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431196) $31.01

Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $144.00

Seat Cushion Set - Seat cushion kit, black and white. Contains seat cushion, lower backrest and upper backrest. For tractors: Hydro 70, Hydro 86, Hydro 100, 504 Deluxe, 544 row crop, 656 prior to serial number 145000, 666, 686, 706, 756, 786, 806 prior to serial number 14500, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504 Deluxe, 2706, Deluxe, 2756 Deluxe, 4100, 4156, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $144.00

No
Picture
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

$Farmall 666 Seat Cushion Set - 3 Piece, Vinyl, White\Black$
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $56.00

No
Picture
Seat Upper Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178456, Ref: R0867) $148.00

Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $34.00

Upper Backrest Plate, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574, 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 387178R1, For a new version of this item use Item #: 109563, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409563) $21.66

Sheet Metal / Body Parts

4th Step - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 114433) $90.00

No
Picture
Fender Grip - Grommet, fender hand grip. Tractors: 1066, 1466, 1468, 1566, 1568, 666, 686, 766, 966, Hydro 100, Hydro 70, Hydro 86 and many more applications. Fits fenders 399329R2, 399328R2, 533187R1, 533188R1. (Item #: 103959, Ref: 388940R1) $9.00

Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $9.00

Fender, LH - 1 Light. For tractor models 1066, 1466, 1468, 1566, 1568, 666, 686, 766, 966, Hydro 100, Hydro 70, Hydro 86. Uses 388944R1 U-Bolt. **$80.00 ADDED TO SHIPPING DUE TO WEIGHT/SIZE.** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103995, Ref: 533187R1) $271.00

Fender, RH - 1 Light. For tractor models 1066, 1466, 1468, 1566, 1568, 666, 686, 766, 966, Hydro 100, Hydro 70, Hydro 86. Uses 388944R1 U-Bolt. Additional $80.00 SHIPPING DUE TO WEIGHT/SIZE. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103994, Ref: 533188R1) $284.00

Fender Set, Single Light Hole - Right Hand and Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 666, 686, 766, 966, 1066, 1466, 1468, 1566, 1568, Replaces International OEM number 533188R1, 533187R1, Single light hole, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender, Single Light Hole - Left Hand use Item #: 103994, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160454) $590.00

Front Grill - This grill is 19-3/4 inch wide and 19-1/16 inch tall. It is made of welded steel, and is painted silver. Must drill (2) 3/8 inch holes in existing grill casting to retain top of grill. Includes bolts. Fits: Hydro 70, Hydro 86, 666, 686. Replaces: 65491C1. (Item #: 168127, Ref: 65491C1) $228.51

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00

Front Weight Locking Cam - This Front Cast Weight Locking Cam has an overall length of 3-1/2 inch. Two (2) used per tractor, priced and sold individually. Fits: Hydro 100, Hydro 186, Hydro 70, Hydro 84, Hydro 86, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 274, 284, 3088, 3288, 3488, 3688, 385, 484, 5088, 5288, 544, 5488, 584, 656, 664, 666, 684, 686, 766, 784, 786, 884, 886, 966, 986; Replaces: 536044R1, 74202C1 (Item #: 152234, Ref: 536044R1) $37.30

Front Weight Locking Cam, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 385, 484, 544, 584, 656, 664, 666, 684, 686, 766, 785, 786, 884, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 74202C1, 536044R1, For front weight bracket use 152230, For front weight bracket spacer use 152232, For a new version of this item use Item #: 152234, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452234) $22.01

Grab Handle - Left Hand - For International / Farmall tractor models 544, 656, 666, 686, 2544, 2656 (all with Gear drive), Replaces International OEM number 389031R1, Fits Left Hand Side, (Item #: 121836) $49.20

Grab Handle - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, Replaces International OEM number 394939R1, Fits Right Hand Side, (Item #: 121837) $50.00

No
Picture
Handrail - Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step Unit - Left Hand use Item #: 114440, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114429) $75.00

Handrail - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Will only fit on tractors with no cabs., Comes primered (color may vary). Prior to painting check fitment, For Step Unit use Item #: 114429, (Item #: 114432) $77.15

Hood Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 389427R91, Size: 5/16"-18NC x 3/4", (Item #: 126532) $5.00

Radiator Screen - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Replaces International OEM number 65492C1, Black semi-glass Autophoretic coating, Width: 20-5/16", Height: 19-7/16", Depth: 1.000", (Item #: 169282) $133.88

No
Picture
Rear Hood Side Panel, RH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378671R1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434916) $55.01

Step - LH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 2544, Replaces International OEM nos 399032R1, Hydrostatic Drive Tractors, Cast Iron, Mounting Bolts are Staggered, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432219) $60.01

Step Unit - For International / Farmall tractor models Hydro 70, Hydro 86, 504 (Farmall), 544, 656, 666, 686, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, 4TH Step use Item #: 114429, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114440) $380.00

Suitcase Weight with IH Logo, Small Handle, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 258, 268, 274, 284, 385, 433, 434, 454, 464, 474, 484, 544, 585, 633, 656, 664, 666, 674, 684, 685, 686, 733, 766, 784, 786, 826, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 2544, 2656, 2826, Replaces International OEM nos 383393R2, 71200C1, 100 lbs, IH Logo, Small Handle, No "L" Cutout, Curved Bottom, Color may vary, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430803) $147.01

Weight Bracket, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 385, 404, 424, 444, 464, 484, 504, 544, 560, 584, 656, 660, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 383389R21, 383389R11, Small Steel Weight Bracket, Length 23", For a new version of this item use Item #: 152230, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499315) $155.01

No
Picture
Weight - Suitcase, Front - For International / Farmall tractor models Hydro 84, Hydro 86, Hydro 100, Hydro 186, 274, 284, 464, 544, 666, 674, 686, 766, 786, 886, 966, 986, 1066, 1466, 1468, 1566, 1568, 1586, 2400, 2500, 2544, Replaces International OEM number 383392R2, 71199C1, Weight: 70 lbs, Comes In Red Primer, Thickness: 1-7/8", (Item #: 119701) $106.00

Steering

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $462.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

Axle Pivot Ball - Thread is 3/4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref: 65320C3) $21.70

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.50

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

No
Picture
Bull Pinion Shaft Cage - Left Hand, Used - For International tractor models Hydro 70, Hydro 86, 666, Replaces International OEM nos 65725C1, Left Hand, Hydrostatic Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434312) $110.01

Center Steering Arm, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 358970R1, 3.375" drop, For a new version of this item use Item #: 100881, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400881) $56.01

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105244, Ref: 192928M1) $9.00

Knee Extension - With bushings 3 7/8 inch diameter. For 460, 544, 560, 660, 666, 686, 706, 806, 1206, 1256, Hydro 70. 370689R21 (Item #: 110386, Ref: R2953) $237.00

Pivot Bolster - For tractor models 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster. (0011R) (Item #: 109484, Ref: 383909R4) $318.54

Pivot Bolster Pin - 1 1/2 inch diameter, 8 1/2 inches long. For 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster Pin. (2961R) (Item #: 173188, Ref: 379941R1) $64.00

Pivot Bolster, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 383909R4, For a new version of this item use Item #: 109484, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409484) $160.01

Pivot Pin Retaining Pin - For International / Farmall tractor models Hydro 70, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Replaces International OEM number 251105R1, Dimensions: 3/8" x 4 7/8", (Item #: 170357) $4.30

Power Steering Cylinder End - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 5088, 5288, 5488, Hydro 100, Hydro 186. Power Steering Cylinder End. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT (Item #: 104440, Ref: 71820C91) $41.00

Power Steering Pump, 391351R94 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 391351R94, 391351R91, 9 GPM, (Item #: 100021) $550.00

Power Steering Pump, Used - For International tractor models Hydro 70, Hydro 86, 544, 656 (s/n 13013-later), 664, 666, 666 (Gear Drive and Hydrostatic Drive), 686 (Gear Drive), 2544, 2656, Replaces International OEM number 391351R94, 391351R91, 1949290C1, 395229R91, 9 GPM, For a new version of this item use Item #: 100021, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400021) $281.01

No
Picture
Replacement Pump Spring and Vane - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), Hydro 100, Hydro 186 (1/72-12/78), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 666 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 786 (Diesel, 1/74-12/80), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/86-12/83), 886 (Diesel, 1/74-12/80), 966 (Diesel, 1/71-12/71), 986 (Diesel, 1/74-12/79), 1026 (Diesel), 1066 (Diesel, 1/74-12/78), 1086 (Diesel, 1/74-12/79), 1466 (Diesel, 1/72-12/77), 1468 (Diesel, 1/74-12/76), 1486 (Diesel, 1/74-12/79), 1586 (Diesel, 1/74-12/79), 2544 (Diesel), 2656 (1/63-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), 3088 (Diesel, 1/81-12/86), 3288 (Diesel, 1/81-12/86), 3488, 3688 (Diesel, 1/81-12/86), 5088 (Diesel, 1/81-12/87), 5288 (Diesel, 1/81-12/87), 5488 (Diesel, 1/81-12/87), 21026 (Diesel), Compatible with International Hay Cutting (s) 375, Replaces International OEM number 405788R91, Spring and vane used with pumps: 382579R94 and 400187R93, (Item #: 165421) $66.98

Spindle and Steering Arm Set Left or Right Hand - Splined Style - Spindle and Steering Arm set left or right hand. 12.750 keyed upright shaft measurements on inner bearing 1.780 inch, outer bearing 1.375 inch. Use R2945 wheel bearing kit. For tractor models 656, 666, 686, 756, 766, 786, 826, 856, 886, 896, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 5088, 5288, 5488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, Hydro 3488. (Item #: 184836, Ref: R2938) $512.00

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $66.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.40

Spindle Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785TM, Right or left hand, Taper mate system, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", Spline: 17, Includes spindle, nut, ring, and washer, (Item #: 100849) $246.00

No
Picture
Spindle Kit,Taper Mate - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 4156, 5088, 5288, 5488, Kit includes spindle, nut, ring and washer and steering arm, Fits left or right hand side, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", For wheel bearing kit use Item #: 100856, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100850) $284.00

Spindle, LH - This spindle is for High Crop only. Spindle measures A= 24.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1466, 1468, 1486, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 104343, Ref: 384257R93) $211.98

Spindle - LH, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384257R93, Dimension A: 24.250", Dimension B: 1.667", Dimension C: 1.780", Dimension D: 1.375", Left Side, For a new version of this item use Item #: 104343, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434690) $166.01

Spindle, RH - This spindle is for High Crop only. Spindle measures A= 24.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1466, 1468, 1486, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 104344, Ref: 384258R93) $408.00

$Farmall 666 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 12.750 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. Replaces 196334C2, 71785C92 (Item #: 100848, Ref: 71785C92) $99.98

Spindle - Right Hand and Left Hand, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Replaces International OEM number 71785C92, 371343R91, 371343R92, Dimension A: 12.750", Dimension B: 1.667", Dimension C: 1.780", Dimension D: 1.375", This item can be replaced by 404345, Right Hand or Left Hand Side, For a new version of this item use Item #: 100848, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400848) $85.01

$Farmall 666 Spindle, Taper-lok - Right Hand\Left Hand$
Spindle, Taper-lok - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785SPO, Splines: 17, Left Hand or Right Hand Side, Shaft: 12.875", Shaft Diameter: 1.667", Large Race: 1.780", Small Race: 1.375", For wheel bearing kit use Item #: 100878, (Item #: 125215) $277.00

Stay Ball Cap, Used - For International tractor models H, Hydro 70, Hydro 86, M, Super H, Super M, Super MTA, 544, 560, 656, 666, 706, 756, 806, 856, 1026, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 60763DB, For a new version of this item use Item #: 108884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408884) $9.00

Stay Ball Socket, Used - For International tractor models Hydro 70, 544, 560, 656, 666, 706, 756, 806, 856, 1026, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 535861R1, For a new version of this item use Item #: 108814, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408814) $14.51

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $513.00

Stay Rod Ball Socket Support, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, Replaces International OEM nos 402477R1, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433452) $385.01

Stay Rod Cap - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856, Hydro 70. (Item #: 108884, Ref: 60763DB) $15.00

No
Picture
Stay Rod Cap Shim - For Hydro 70, 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856. (Item #: 111364, Ref: 60762D) $4.80

Stay Rod Socket - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 826, 856, Hydro 70. (Item #: 108814, Ref: 535861R1) $27.30

Steering Arm - Center For 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256 (Item #: 100881, Ref: 358970R1) $100.00

Steering Arm - Left - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Left Hand Arm, (Item #: 110714) $119.00

Steering Arm - Right Hand and Left Hand, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 383914R1, Left or Right Side, 1.667" diameter hole, .250" keyway, For a new version of this item use Item #: 100884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400884) $65.01

Steering Arm - Right - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Right Hand Arm, (Item #: 110715) $96.00

$Farmall 666 Steering Arm, Taper Mate Style - Right Hand\Left Hand$
Steering Arm, Taper Mate Style - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488 (Hydro), 3688, 5088, 5288, 5488, Replaces International OEM number 531249TM, 531248TM, Right or left side, For Taper-Mate Spindles only, (Item #: 100889) $85.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

No
Picture
Steering Pilot Valve, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 756, 826, 856, 1026, 2544, 2656, 2756, 2826, 2856, 21026, Compatible with International Combine(s) 403, 815, 915, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 527492R91, For a new version of this item use Item #: 112161, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435579) $225.01

Steering Support Housing, (LH) - For tractor models 2544, 2656, 544, 656, 666, 686. (Item #: 110755, Ref: 388736R1) $160.00

Steering Support Housing, (RH) - For tractor models 2544, 2656, 544, 656, 666, 686. (Item #: 110754, Ref: 388737R1) $146.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $50.00

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $17.20

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $60.00

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $49.98

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.50

Taper Lock Snap Ring - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128038) $2.70

Taper Lock Washer - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128039) $4.10

Taper-Lok Assembly Set of 2 - The two Taper-Lok spindles measure 12.875 inches shaft, 1.667 inches shaft diameter, 1.780 inches inner bearing, 1.375 inches outer bearing, and a Spline Count of 17. This is a set of TAPER-LOK Spindles, 1 left hand steering arm, 1 right had steering arm, snap rings, nuts, and washers. If wheel bearings are needed, order FW120FS, (Item #: 111392, Ref: 71785TLS) $570.00

Taper Lok Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128037) $5.00

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $86.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

Tie Rod End - Tie rod end, left-hand. Notched (6), 15-3/4 inch to center of post and .092 inch diameter. For adjustable front axles. 56 to 80 on tractors: 666, 686, Hydro 70 and 86. 58 to 82 on tractors: Hydro 100, 544, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488, 666, 686, 766, 786, 886, 966, 986, HYDRO 100, HYDRO 70, HYDRO 86. Replaces 359984R93, 384441R93, 359984R1. (Item #: 100867, Ref: 359984R93) $25.00

Tie Rod End - Tie rod end, right-hand, threaded, 3-7/8 to center of post. For tractors: 666, 686, Hydro 70 and 86, Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces 384006R1, 384006R93, 384006R92 (Item #: 100866, Ref: 384006R92) $16.80

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.60

Tie Rod Tube - Tie rod tube. 18 inches long, .950 inch inside diameter, .941 inch inside diameter thread. 2 slots one end, threads other end. For 56 to 80 on tractors: 666, 686, Hydro 70 and 86. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100868, Ref: 383917R1) $23.50

Wheels

Bearing Cone - Bearing cone. For tractor models 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111288, Ref: 619386R91) $10.50

No
Picture
Dual Hub Set, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 674, 686, 2544, 2656, Replaces International OEM nos 391279R1, 389539R1, 375463R1, Diameter: 2 3/4", 8 Bolt, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464747) $450.01

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $118.00

Front Wheel Bearing - Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors: 1026, 1066, 1086, 1206, 1246, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2504, 2606 HD Front Axle, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 544, 5488, 460 hi clear, 560, 606, 656, 666, 685, 686, 706, 756, 754, 766, 786, 806, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86 (Item #: 100856, Ref: FW120FS) $34.50

Front Wheel Bearing Kit - Bearing kit, for front wheel, Contains Bearing LM603049-BP 1.781 inches ID, Bearing Cup LM603011-BP 3.062 inches OD, Bearing LM48548-BP 1.375 inches ID, Bearing Cup LM48510-BP 2.562 inches OD, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP 2.250 inches ID, 3.250 inches OD. For tractor models 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100856, Ref: 371418R91) $34.50

Front Wheel Hub, 6 Bolt - For tractor models 460, 504, 544, 656, 666, 686, Hydro 70, Hydro 86. Hub uses #WBKIH2 wheel bearing kit. (Item #: 104505, Ref: 395310R11) $177.00

Front Wheel Hub, 6 Bolt - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 544, 5488, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydrp 186, Hydro 70, Hydro 86. Hub uses FW120FS wheel bearing kit. Replaces: 370256R11, 370256R21, 391823R11 (Item #: 100877, Ref: 391823R11) $55.00

Front Wheel Hub, 8 Bolt - For tractor models 1026, 766, 966, 1066, 1466, 754, 2756, 826, 2826, 856, 2856, 1586, 786, 886, 986, 1086, 1486, 1566, 1568, 3088, 3288, 3688, 5088, 5288, 5488, 666, 815, 1206, 1246, 1468, 706, 2706, 806, 2806, 685, 915. Replaces 1323559C1. Uses FW120FS bearing kit, not included. (Item #: 100878, Ref: 391824R11) $112.00

Front Wheel Hub Seal - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 544, 560, 584, 585, 656, 666, 674, 684, 685, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 885, 886, 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 Replaces International OEM number 370254R1, , Compatible with John Deere Combine (s) 6600, Compatible with John Deere Harvester (s) 484, 5200, 5400, 5440, 5460, Replaces John Deere OEM number AH75484, (Item #: 123837) $9.30

Rear Rim To Center Bolt - For International / Farmall tractor models Hydro 70, 240, 300, 330, 340, 350, 404, 450, 460, 504, 560, 656, 666, 686, Replaces International OEM number 363017R1, Diameter 5/8", Length 2-1/4", (Item #: 126620) $16.80

Rim Clamp Fixed, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, 21456, Replaces International OEM nos 397251R1, 380871R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499564) $10.01

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, 300, 340, 350, 400 (s/n 5181-later with 38" rims), 450 (s/n 501-later with 38" rims), 460, 504 (with 5" offset wheels), 560, 656, 666, 686, 2504 (with 5" offset wheels), 2656, Replaces International OEM number 363016R1, Adjustable Clamp, For a new version of this item use Item #: 173838, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430075) $10.01

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, 300, 340, 350, 400, 450, 460, 504, 560, 656, 666, 686, 2504, 2656, Replaces International OEM nos 373926R1, Fixed Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430087) $12.76

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, Replaces International OEM number 380870R1, For a new version of this item use Item #: 157781, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499563) $10.01

Spindle Washer - For International / Farmall tractor models Hydro 70, Hydro 86, 385, 404, 424, 444, 454, 460, 484, 485, 504, 544, 584, 585, 606, 656, 664, 666, 674, 684, 686, 784, 884, 5088, 5288, 5488, Replaces International OEM number 369857R1, O.D.: 1.500", I.D.: .795", Thickness: .15", (Item #: 124771) $1.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Inner Bearing race I.D.: 1.780", Outer Bearing race I.D.: 1.375", Includes: Inner Bearing Cone and Cup, Outer Bearing Cone and Cup and 2 piece Seal without Retainer, (Item #: 176997) $56.68

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.00

Wheel Clamp Bolt - Rear Rim - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 393772R1, For Nut use Item #: 157781, (Item #: 157779) $8.60

Wheel Clamp - Rear Wheel - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 380870R1, (Item #: 157781) $27.20

No
Picture
Wheel Hub - 6 bolt. For tractor models 544, 560, 656, 666, 686, 706, 766. (Item #: 100877, Ref: R2312) $55.00

Wheel Hub, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544 (Utilty s/n 13200-later), 560, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 815, 915, 1420, 1440 (s/n 40192-earlier), 1460 (s/n 42555-earlier), Replaces International OEM number 391824R11, 1323559C91, 8 Bolt, For a new version of this item use Item #: 100878, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400878) $55.01

Wheel Hub, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 504, 544, 560, 606, 656, 656U, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 815, 915, Compatible with International Harvester(s) 782, 1400, Replaces International OEM number 391823R11, HH391823, Replaces International Casting nos 370256R2, Casting No 370256R2, 6 bolt, For a new version of this item use Item #: 100877, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400877) $41.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.10

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.10

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.10

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.60

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.90

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

$Farmall 666 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Farmall 666 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall 666 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 666 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Farmall 666 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall 666 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall 666 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall 666 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $367.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $440.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $440.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $45.00

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.00

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $42.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $58.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.10

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.50

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $16.90

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $39.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00