International Harvester / Farmall 686 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Accessories / Supplies
Engine Block Heater - Frost plug heater with cord. 1250 watt, 120 volt, 1.240 inch diameter. Fits tractors and combines with diesel engines. Cord is 72 inches long. Fits diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 164169, Ref: 71151C91) $88.00

Belts
Belt - Generator / Water Pump - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Alternator), Compatible with International Combine (s) 715, Replaces International OEM number 403617R1, All gas engines, (Item #: 123133) $14.87
Fan Belt - For International / Farmall tractor models Hydro 70 (diesel), 666 (diesel), 686 (diesel), 5088 (diesel), 5288 (diesel), 5488 (diesel), Replaces International OEM number 65999C2, Length: 63.5", Width: 5/8", Thickness: .43", Color: Black, Material: Polyester Cord, Belt Type: Raw Edge Cogged, (Item #: 182211) $33.80

Brakes
Brake Actuating Assembly, Used - For International tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, For a new version of this item use Item #: 105442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405442) $97.01
Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70
Brake Actuator Assembly - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, (Item #: 105442) $170.00
No Picture Brake Disc - use 1975463c2 (Item #: 105449, Ref: 1975463C3) $20.50
Brake Disc - 6.50 inch outside diameter, 3.50 inch inside diameter, 1.84 inch spline diameter, 10 spline. For tractor models 2656, 656, 664, 666, 686, Hydro 70, Hydro 86. Replaces 391445R91, 1975463C3. (Item #: 105449, Ref: 1975463C2) $20.50
Brake Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391445, 830617, 619731, Kit Includes 2 Brake Discs, 5 Steel Balls, 3 Brake Springs, (Item #: 162744) $69.00
No Picture Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $116.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.20
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $14.80
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00
Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.30

Clutch
Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $7.30
No Picture Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-11/16 inch 16 spline, .787 inch pilot. For tractor models 460, 664, 666, 686, 3616. (Item #: 122257, Ref: S.70927) $27.00
No Picture Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $44.60
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.00
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $18.50
Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00
Clutch Disc - 11 inch diameter, 1-3/32 inch hub, 10 spline. For tractor models 656, 664, 666, 686, 2656, 3616. (Item #: 184835, Ref: 388625R91) $185.00
Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00
Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00
No Picture Clutch Disc, 4 Pad - For International / Farmall tractor models 656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 664 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 666 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 686 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 2656 (Gas: s/n 1946-later; Diesel: s/n 2118-later), 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Compatible with International Construction and industrial models 3616 (Gas: s/n 1946-later; Diesel: s/n 2118-later), Replaces International OEM number 388625, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 166064) $146.00
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 203639) $167.50
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616, Compatible with International Construction and industrial models 3616, Replaces International OEM number 388625R93, 388625R93R, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, For a New version of this sku use Item #: 184835, (Item #: 204190) $109.00
Clutch Disc, Remanufactured, 388625R93 - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3514, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 388625R93, 388625R93R, 388625HD8, Clutch Size: 11", Clutch Hub: 1-3/32", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 8 Reg Pads, (Item #: 204415) $170.01
Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00
Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01
Pressure Plate Assembly - For International / Farmall tractor models 656, 664, 666, 686, 2656, 3616 (Gas, s/n 1946-later, Diesel, s/n 2118-later), Replaces International OEM number 388616R91, 11" Diameter, 1-3/4", 16 Spline, Fixed, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166080) $347.00
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00
Remanufactured Clutch Kit - Our remanufactured clutch kit contains: a 12 inch, 16 spline, 1 5/8 inch hub, 12 spring remanufactured pressure plate assembly; a 11 inch, 10 spline, 1 3/32 hub, 4 pad remanufactured clutch disc; new release and pilot bearings. For tractors 656, 664, 666, 686, 2656 For 2656, 656, 664, 666, 686. (Item #: 202010, Ref: 388616K) $359.75
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Cooling System
Belt - Generator / Water Pump - Outside diameter 47.77 inches, 1/2 inch v-belt. Replaces 403617R1, 372596R1, 393415R1, L71058. Used on the following gas tractors: Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Item #: 173491, Ref: 310050) $10.20
Fan Shroud, Used - For International tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 2706, 2756, Replaces International OEM nos 396356R1, Fits Farmall tractor models 706, 756, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431147) $128.01
Oil Cooler Mount Gasket - For International / Farmall tractor models 666, 686, 766, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 675513C1, (Item #: 156020) $9.90
Radiator - Core size 20.375 inches high, 20.00 inches wide. For tractor models (666, 686, Hydro 70, Hydro 86 all with diesel engine). (Item #: 101722, Ref: 65427C1) $580.00
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.00
Radiator Hose Lower - Radiator hose, lower, for diesel tractors. 1-7/8 inch inside diameter. For tractor models 666, 686, 706, 756, 826, 86, HYDRO 70. (Item #: 117698, Ref: 396355R1) $19.20
Radiator Hose, Lower - Radiator hose, lower, for gas tractors. For tractor models 666, 686, 706, 756, 806, 826, 856, 86, HYDRO 70. 2 inch inside diameter, both ends. (Item #: 116660, Ref: 378704R1) $19.80
Radiator Hose, Lower - For tractor models 666, 686, 86, HYDRO 70. (Item #: 116658, Ref: 65430C1) $22.90
Radiator Hose Upper - Radiator hose, upper, for gas tractors. For 666, 686, 706, 756, 86, HYDRO 70. 2 inch inside diameter on both ends. (Item #: 116661, Ref: 396353R1) $19.60
Radiator Hose Upper - Radiator hose, upper. For 666, 686, 86, HYDRO 70 (Item #: 116655, Ref: 65429C1) $18.40
Radiator Hose Upper - Radiator hose (2 inch inside diameter), upper, for diesel tractors. For 666, 686, 756, 86, HYDRO 70. (Item #: 116807, Ref: 406766R1) $6.98
Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00
Radiator, Premium Used - For International tractor models Hydro 70, Hydro 86, 544, 666 (s/n 10552-later), 686, 706 (s/n 37237-later), 756, 766, 2544, 2756 (all Gas), Replaces International OEM number 65426C1, 396351R1, 403649R1, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101717, Additional Handling and Oversize Fees Apply To This Item, (Item #: 300304) $327.01
Water Pump - Water pump with hub installed. Heavy duty replacement with 8 vane impeller. Excellent where low cooling capacity is a problem. For diesel engines: D312, D360, D and DT414, D and DT436, D and DT466. For 1066, 1086, 1440, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 453, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 815, 886, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces: 672644C95, 673162C93, 673162C94. (Item #: 100795, Ref: 673162C93) $113.00
Water Pump - For diesel: Hydro, 686, 86, 706, 756, 2076, 715 serial number 23001 and up, Cotton Harvester 1400, 782 Cotton Picker, 786, 826, 886 serial number 14472 and up, 2826, 3088, 3288, 1420, 1400, 782. Water pump with hub installed, gasket included. (Item #: 100793, Ref: 3132676R93) $77.00
Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $86.00
No Picture Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30
Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01
Water Pump, Remanufactured, 673623C92, 675806C3 - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 666, 686, 766, 826, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 815, 1440, Replaces International OEM number 673623C92, 1928145C1, 673623C91, 673623C93, 7449909C91, Replaces International Casting number 675806C3, 675806C1, 675806C2, 677856C2, Includes mounting gasket, 4 Fin Impeller, With hub, (Item #: 205226) $103.01
Water Pump, Remanufactured, 746170C91, 318118R2 - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 2656, Compatible with International Combine (s) 615, Replaces International OEM number 746170C91, Replaces International Casting number 318118R2, 169204R1, 303394R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Press On Pulley, (Item #: 205079) $111.01

Decals and Emblems
Chassis Decal Set - Vinyl - International Chassis Decal Set - Vinyl Die Cut. DOES NOT INCLUDE HOOD SET. For tractor models: 424, 444 US Built, 544, 656, 686, HYDRO 70, HYDRO 84. (Item #: 183256, Ref: R0548V) $68.00
Decal Set - For 686. Hood only Decal Set. Note: Includes two "686" decals (not shown in the picture). (Item #: 183496, Ref: R3629) $65.00
No Picture Decal Set, Chassis - For tractor models 686, 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788. (Item #: 183177, Ref: R5165) $62.00
Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $19.10
Grille Emblem - For International / Farmall tractor models Cub (184), Hydro 70, Hydro 86, Hydro 100, Hydro 186, 140, 240, 340, 404, 424, 444, 544, 606, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, Replaces International OEM number 368523R4, Height:3-3/8", Made of die cast metal, (Item #: 108482) $51.00
Hood Ornament, Black Plastic - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. (Item #: 108485, Ref: 538005R1) $13.50
Hood Ornament, Die Cast, Chrome Plated - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. Replaces 538005R1 (Item #: 121573, Ref: 538005R1CH) $20.50
International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.60

Drive Train
1st And Reverse Slider Gear - This 1st and Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1. (Item #: 111280, Ref: 388165R1) $180.00
4th Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388151R1, Teeth: 44, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430779) $263.01
Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70
Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Hand Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, (Item #: 200264) $7280.01
No Picture Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Foot Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 205088) $8100.01
PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00
Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01
Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01
Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $316.00
Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $45.20
Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $92.00
Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00
No Picture Transmission Shift Handle Housing, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388181R2, Replaces International Casting nos 388181R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445760) $278.01

Electrical System
Alternator - Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o-clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 113608, Ref: 1100583) $121.00
Alternator - 12 volt, 61 amp. For tractor models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 serial number 8762940 to 8825000 and 8826412 and up), 2590, 2594, 3294, (1070 serial number 8675001 and up), 1270, 1370, 1570, 2670, (970 serial number 8816812 to 8817164 and 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub serial number 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 serial number 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Item #: 110572, Ref: ADR0133) $119.00
Alternator - 12 volt, 72 amp. For tractor models (453 1975-79 with 301 gas), (453D 1975-79 with 360 dsl), (715 1975-79 with 301 gas), (715D 1975-79 with 310 dsl), (815 1971-74 with V304 gas/V345 LPG), (815D 1971-79 with 414 dsl), (915 1971-74 with V392 gas/345 gas ot LPG), (1420 1978-86 with 358 dsl), (1430D 1980-84 with 358 dsl), (1440D 1974-86 with 436 dsl), (1460D 1977-86 with 436 dsl), (1480 1977-79 with 466 dsl), (666D 1972-76 with 312 dsl), (Hydro 70D 1973-76 with 312 dsl), (Hydro 100D 1973-76 with 436 dsl), (Hydro 186D 1976-81), (Hydro 686 1976-80 with 291 gas), (Hydro 686D 1976-80), (140, 140HC 1975-79 with 123 gas), (464 1975-78 with 175 gas), (464D 1977-78 with 179 dsl), (574 1975-78 with 200 gas), (574D 1977-78 with 239 dsl), (674, 674RC 1978-84 with 200 gas), (674D, 674DRC 1978-84 with 239 dsl), (686 1976-80 with 291 gas), (686D 1976-80 with 312 dsl), (766D 1971-76 with 360 dsl), (886D 1976-81 with 360 dsl), (966D 1971-76 with 414 dsl). Replaces 1102921, 1102922, 1100587, 1105573. (Item #: 110572, Ref: ADR0133) $119.00
Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00
Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.20
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.90
Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.90
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.00
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60
Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1) $31.10
No Picture Starter - Delco (6736, 6738) - For International / Farmall tractor models 666 (Diesel, 1976-80), 686 (Diesel, 1976-80), Compatible with International Engine (s) D312 (Diesel, 1976-80), Replaces Case IH OEM number 70954C91, Replaces Delco Remy manufacturer number 1109252, 1998368, 1998486, 323-696, Lester 6736, 6738, Volts: 12, Rotation: Counter Clockwise (CC), Type: Direct Drive (DD), Teeth: 10, (Item #: 189423) $497.00
No Picture Starter - Delco Style (6736), Remanufactured, Delco Remy, 1109252, 70954C91 - For International / Farmall tractor model 686, Replaces International OEM number 70954C91, Replaces Delco Remy manufacturer number 1109252, 1998368, Replaces manufacturer number 6736, 140-863, 91-01-4226, 140-863A, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Solenoid use Item #: 110771, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203509) $460.00
No Picture Starter - Delco Style DD (4236) - For International / Farmall tractor models 504, 544, 656, 666, 686, 2544, 2656, Compatible with International Combine (s) 151, 181, 615, 715, 815, 915, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 396523R92, 396523R93, 396556R92, Replaces Case OEM number 104193A1, 396522R91, A485615Z, Replaces Delco Remy manufacturer number 1108343, 1108344, 1109360, 323-635, 1998283, Replaces manufacturer number 4236, 140-746, 140-746A, 91-01-4181, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For gas applications, For a Remanufactured version of this sku use Item #: 203453, (Item #: 160374) $326.57
Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $22.90
No Picture Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57
Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.60
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.00
Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $36.00
Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70
Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $11.00

Engine Bearings
No Picture Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10
Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10
Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672) $28.00
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499) $12.00
Connecting Rod Bearing - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 376666R11, Sold in complete sets, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106497, (Item #: 106495) $139.00
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500) $12.90
Connecting Rod Bearing - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3056879R11, Sold in complete sets, Bearing Size: .020" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106497, (Item #: 106496) $154.00
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545) $12.90
Connecting Rod Bearing - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055781R11, Sold in complete sets, Bearing Size: .030" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106496, (Item #: 106497) $25.98
Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546) $21.20
Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $198.00
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498) $12.20
Connecting Rod Bearing - Standard - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055351R91, Sold in complete sets, Bearing Size: Standard, 1.264" width, RH notch, For .010" connecting rod bearing use Item #: 106497, (Item #: 106494) $208.00
No Picture IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $7.10
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382360R91, 332276R91, 376670R91, 376673R91, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106619, (Item #: 106617) $97.00
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106621) $113.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 376683R91, 332279R91, 376686R91, 376692R91, 382361R91, Sold in complete set, Bearing Size: .020" oversize, For Standard main bearing use Item #: 106619, (Item #: 106618) $131.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106622) $216.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382358R91, 332270R91, 367288R91, 367291R91, 367297R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106618, (Item #: 106619) $77.98
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106622, (Item #: 106623) $49.98
Main Bearing Set - For tractor models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). If other than standard, specify size in comments (.010, .020). (Item #: MBK310D) $142.00
Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00
Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $111.00
Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $121.00
Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $225.00
Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $165.00
Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $89.00
Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $111.00
Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $100.00
Main Bearings - Standard - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106623, (Item #: 106620) $137.00
Pilot Relief Valve, Used - For International tractor models 544, 656, 664, 666, 686, 756, 2544, 2656, 2756, 2826, Replaces International OEM nos 389033R93, 1600 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431146) $89.01
PTO Clutch Pack, Heavy Duty - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 756, 766, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 2756, 2856, 3388, 4166, 4186, Replaces International OEM number 68802C91, 381490R4, 381489R3, Includes (10) One Sided Friction Drive Plates, (2) Steel Sealing Rings, (Item #: 169792) $175.00
No Picture PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $7.00

Engine Gaskets
Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91) $14.98
Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20
Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $155.00
Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94
Gasket Set - Lower - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886 (chassis s/n 14472-later), 955, 956, 1055, 1056, 2706, 2756, 2826, 3088 (s/n 121247-earlier), 3288 (s/n 111090-earlier), Compatible with International Engine (s) D310, D358, Replaces International OEM number 1967013C1, 3136817R99, 1967012C1, (Item #: 160290) $105.00
Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $100.00
No Picture Head Gasket Set - For 666, 686 with D312 Diesel Engine (Item #: 106692, Ref: HS3873) $151.00
Lower Gasket - LOWER GASKET. For 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: CS6310D) $127.77
Lower Gasket Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Replaces International OEM number 1967012C1, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Engines: D310, D358, (Item #: 106728) $100.00
Oil Pan Gasket - For tractor models 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 106707, Ref: 3055987R3) $23.10
Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.80
Oil Pan Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, D360, Replaces International OEM number 671825C2, Oil Pan Gasket Only, (Item #: 106708) $23.20
No Picture Overhaul Gasket Set with Crankshaft Seals - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Compatible with International Engine (s) D312, D360, D360 (Turbocharged), Set includes: head gasket set, conversion gasket set, oil pan gasket, and crankshaft seals with sleeves, (Item #: 191077) $401.00
Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $17.20
No Picture Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $142.00
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $22.20
No Picture Rear Main Seal - For 666, 686 with D312 Diesel Engine (Item #: 106660, Ref: SS47866) $26.98
No Picture Upper Gasket - UPPER GASKET. For 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: HS6310D) $152.20
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, Replaces International OEM number 675389C1, (Item #: 158262) $16.50

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - C291 Gas - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (3-3/4 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. Note: For engines with bore classification markings 1 or 2. Crankcase bore classifications are stamped on top of filter base mounting pad. ENGINE BEARINGS AND PIN BUSHINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130609, Ref: BEKH1189-LCB) $615.00
Basic Engine Overhaul Kit, Less Bearings - D310 Diesel - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings (3-7/8 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130611, Ref: BEKH6310D-LCB) $775.00
No Picture Basic In-Frame Engine Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189592, Ref: BIFH1189) $547.00
No Picture Basic In-Frame Engine Kit - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189599, Ref: BIFH6310D) $712.00
Cylinder Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (6 Cylinder Diesel), Replaces International OEM number 671513C95, (Item #: 166503) $150.00
Cylinder Kit - "Dominator" - For International / Farmall tractor models Hydro 86, 385, 584, 585, 686, 706, 756, 2500, 2500A, 2500B, 2706, 2756, Compatible with International Engine (s) D155, D206, D310, Replaces International OEM number 3228771R91, (Item #: 128732) $130.00
Cylinder Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number A77691, 675356C2, Bore: 3.875", (Item #: 156084) $70.00
Engine Rebuild Kit - Less Bearings, D312 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (diesel), Bore: 3.875", Stroke: 4.410", Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106623, (Item #: 130610) $1129.01
Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $263.00
Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6 cylinder, C263, C291, C301). Kit includes valves (Stellite Exhaust Valve), valve springs, valve keys, valve guides. (Item #: 120320, Ref: VOKH263S) $332.00
Valve Overhaul Kit - D310 and D358 Diesel - For tractor models 686, 706, 756, 2706, 2756, Hydro 86, 786, 826, 886 (chassis serial number 14472 and up), 2826, 3088, 3288. For 6 cylinder D310 and D358 Diesel. Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH358) $524.33

Engine Parts
1st and Reverse Sliding Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 388165R1, Teeth: 57, Splines: 14, For a new version of this item use Item #: 111280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411280) $77.01
3rd Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388150R1, Teeth: 37, Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409376) $153.01
Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01
Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $286.00
Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01
No Picture Camshaft, Remanufactured, 675625C91 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Replaces International OEM number 675625C91, (Item #: 207148) $660.01
Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00
Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743) $5.90
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Constant Mesh Gear, Used - For International tractor models 656, 666, 686, 2656, Replaces International OEM nos 388152R1, Teeth: 59, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429970) $204.01
Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92) $276.00
Crankshaft, Remanufactured, 320185R, 367267R - For International / Farmall tractor models 560 (with C263, C291 or D282), 656 (with C263, C291 or D282), 666 (with C291), 686 (with C291), 706 (with C263, C291 or D282), 756 (with C291), 766 (with C291), 806 (with C301), Replaces Casting number 320185R, 367267R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Additional Handling and Oversize Fees Apply To This Item, (Item #: 200249) $780.01
Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30
No Picture Cylinder Head, Remanufactured, 3055050R1 - For International / Farmall tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine (s) 715, 815, 915 (Diesel), Replaces International Casting number 3055050R1, 3055368R98, Engines 310, 358, Cylinders: 6, Casting No. 3055050R1, 3055368R98, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200213) $660.01
No Picture Cylinder Head, Remanufactured, 3055656R - For International / Farmall tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine (s) 715, 815, 915 (Diesel), Replaces International Casting number 3055656R, 3055655R95, Casting No. 3055656R, 3055655R95, Engine 310, 358, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205504) $1500.01
Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.10
No Picture Flywheel With Ring Gear - For International / Farmall tractor models 656 (gas engine with gear drive), 666 (gas engine with gear drive), 686 (gas engine with gear drive), Replaces International OEM number 396420R91, Size: 11", Step: 1.437", Teeth: 133, Engine: C-263, C-291, (Item #: 122027) $771.00
Flywheel With Ring Gear - For International / Farmall tractor models 666 (Gear Drive), 686 (Gear Drive), Replaces Case IH OEM number 282208A1, 680712C91, Engine: D-312, Additional Handling and Oversize Fees Apply To This Item, (Item #: 159127) $1039.01
Flywheel With Ring Gear - For International / Farmall tractor model 686 (Diesel engine D-310), Replaces Case IH OEM number 3218731R92, (Item #: 159131) $1019.01
Mechanical TA Back Gear - For International / Farmall tractor models 656, 666, 686, Replaces International OEM number 389156R1, (Item #: 111215) $236.00
Piston Pin Bushing - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number 675899C1, (Item #: 160343) $16.30
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40
Ring Gear, Flywheel - Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear and Hydro Drive with D-188 Engine serial number 13676->), 544 (with C-200 Engine), 656 (Gear and Hydro Drive with C-263 engine/Hydro Drive with D-282 Engine, 666 (Gear and Hydro Drive with C-291 Engine/Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL/CONSTRUCTION: 2504 (gear and Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear and Hydro Drive with D-188 Engine, 3514 (with Synchromesh Transmission with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5/16 inch inside diameter and .485 inch width. (Item #: 116898, Ref: 396421R1) $61.00
Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00
Second Speed Driving Gear, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388149R1, Teeth: 33, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496798) $204.01
Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $156.00
No Picture Tach Drive Gear, Used - For International tractor models 666, 686, 766, 966, 1066, 1466, 1486, 1566, 3388, 3588, 3788, 4166, 4366, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 676938C1, Teeth: 32, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443199) $116.01
TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01
Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $201.00
No Picture Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $184.00
Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $167.00
Torque Amplifier Drive Shaft, Used - For International tractor models 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 360676R51, Splines: 10/ 14, Diameter: 1.128", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436810) $231.01
No Picture Used Cylinder Head, Used - For International tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine(s) 715, 815, 915 (Diesel), Replaces International Casting number 3055656R, 3055655R95, Engine(s): 310, 358, Cylinders: 6, Injector Nozzle Tip Bore: .385", Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205504, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405504) $650.01
Valve, Exhaust - Exhaust valve for models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128731, Ref: 3055056R2) $12.98
Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $0.98
Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70
Valve, Intake - Intake Valves sold each. Please verify the number of valves needed for your engine. Some engines require 3, 4 or 6 Intake Valves. Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $14.00
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $58.00
Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 2656, 2706, 2756, 656, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH263S) $124.14
No Picture Valve Service Kit - Cylinder HEAD Service KIT. For tractor models 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH358) $387.93
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70
Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.10
Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80
Valve Train Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Engines: D312, D360 Diesel, (Item #: 120321) $300.00
Valve Train Set - For International / Farmall tractor models 656, 666, 686, 706, 756, 766, 2656, 2706, 2756, Replaces International OEM number 237248R1, Replaces Intake Valves 234276R1, Exhaust Valve 372699R3, Valve Springs 367192R1, Valve Guides 535229R1, 237248R1, Valve Keepers 33K701, Stellite Exhaust Valves, (Item #: 114736) $279.17

Engine Pistons and Sleeves
Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $6.10
Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $6.50
Sleeve and Piston Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Sleeves, pistons and rings, pins and retainers. For 3-3/4 inch standard bore. Kit contents for 1 engine. (Item #: 184188, Ref: PK189) $782.00
Sleeve and Piston Set - Used on C291 gas engines, Contains sleeve, stepped head piston, rings, pin and retainer for one cylinder. For 3-3/4 inch standard bore. (Item #: 395356R93) $67.04
Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $5.30

Engine Rings
No Picture Piston Ring Set - Ring set for a 3 ring piston and is a set for 6 pistons, 1 used per engine. For C291 CID gas 6 cylinder engine with a 3 3/4 inch bore. Contains 1 compression 1/8, 1 compression 3/32 and oil ring 1/4 for each cylinder. For 2706, 2756, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86 (Item #: 178267, Ref: PRS189) $136.00
No Picture Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 2826, 3088, 3288 (all diesel), Compatible with International Engine (s) D310, D358, Bore Size: 3.875", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as a complete 6 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120853, (Item #: 174213) $264.00
No Picture Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 120867, (Item #: 174316) $145.00
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Piston Ring Set - Standard - 6 Cylinder use Item #: 174316, (Item #: 120867) $26.30

Exhaust System
Exhaust Manifold Nut - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682987C1, Replaces Case IH OEM number 63460D, 43715D, (Item #: 168629) $2.20
Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $33.00
Exhaust Manifold Stud - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682840C1, 63459D, (Item #: 168630) $4.80
No Picture Extension - For International / Farmall tractor models Hydro 70 (Hydrostatic Drive, 1/74-12/77), Hydro 86 (Hydrostatic Drive, 1/74-12/77), Hydro 100, 656 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/68-12/83), 966 (Diesel, 1/71-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), Compatible with International Engine (s) D361 (6-cylinder, Diesel), DT361 (6-ctlinder, Turbo Diesel), D407 (6-cylinder, Diesel), DT407 (6-ctlinder, Turbo Diesel), Replaces International OEM number 527703R1, (Item #: 166178) $59.00
Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $23.70
No Picture Manifold - Exhaust manifold, for gas powered tractors. For 2706, 2756, 2826, 2856, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86 (Item #: 101556, Ref: 384290R21) $234.00
Manifold - For International / Farmall tractor models Hydro 70, Hydro 86, 606 (use pipe adapter125212), 656 (use pipe adapter 125217), 666, 686, 706, 756, 766, 806, 826, 856, Replaces International OEM number 367281R1, 384290R2, 85699R1, Engines: C221 (use pipe adapter 125212), C263 (use pipe adapter 125212), C282, C291, C301, Completely assembled 2-piece assembly contains OEM heat spring, 2-1/2" NPT threaded pipe outlet, Application information, This completely assembled 2-piece intake and exhaust manifold is easier to install! Our 121565 2-piece manifold with heat spring eliminates the need to match the flanges of a used manifold to half of a new manifold, Please order 113422 exhaust pipe unless you have a 460, 560, 606, 660, 2606 or 3616, If you have a 460, 560, 606, 660, 2606 or 3616, then you need an exhaust adapter. Please view: 125212 adapter. This adapter offsets the exhaust hole to align with the hood of the tractor and also steps down the pipe diameter to 2" NPT. These tractors use 126744 exhaust pipe, If you have a 656 or 2656, then you can use the 113422 exhaust pipe, however the exhaust pipe is not perfectly centered on the exhaust hole in the hood. Also, you need to have the inlet pipe on the muffler expanded to accommodate this larger diameter pipe or you need to purchase 100824 muffler, If you need to adjust the pendulum (121566) on the intake manifold, please use a Torx T8 screwdriver or bit, (Item #: 121565) $490.00
Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00
No Picture Manifold Gasket Set - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 eng. (Item #: 101555, Ref: R0057G) $27.50
Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.30
Manifold Heat Control Weight - Made of cast iron. For gas Models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856. (Item #: 121566, Ref: 85699R1) $23.70
Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $216.00
Muffler - Vertical muffler for diesel tractors. Fits engines D310, and D358. Inlet inside diameter 2-15/16 inch, outlet outlet diameter 3 inches, length 42 inches, oval body. For tractor models Hydro 86, 686, 706, 756, 2706, 2756, 826, 2856. For 2706, 2756, 2856, 686, 706, 756, 826, HYDRO 86. (Item #: 180433, Ref: 530588R4) $303.00
No Picture Muffler - For International / Farmall tractor models 666 (with D312 diesel), 686 (with D312 diesel), Replaces International OEM number 66727C2, Inlet I.D.: 3-1/8", Length: 15", Additional Handling and Oversize Fees Apply To This Item, (Item #: 124251) $156.00
Muffler - Vertical Exhaust inlet inside diameter 2 15/16 inches, outlet outside diameter 3 inches, overall length 34 inches. For 666, 686, 706, 766, Hydro 70, Hydro 86 with C263 or C291 Gas Engines, 706 with D310 Diesel Engine, 806 with C301 Gas or D361 Diesel, 826, 856 with C301 Gas Engine, 856 with D407 Diesel Engine. OEM numbers 570578R3, 530578R4 use R1756 clamp, use R1805 rain cap. (Item #: 100824, Ref: R1650) $130.00