International Harvester / Farmall 784 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Band with Lining - Used on Hand Brakes on International and CaseIH models 385, 454, 474, 475, 484, 485, 574, 584, 585, 674, 684, 784, 833, 885, this assembly replaces 401992R1, 401992R2, 401992R3, 1971050C1 (Item #: 105422) $134.00
Brake Disc - 10.190 inch outside diameter, 15 internal splines. For tractor models Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84. Replaces 1027256C1, 114621C1, 114622C2, 399734R1 (Item #: 105452, Ref: 114622C2) $110.00
Brake Master Cylinder Repair Kit - For International / Farmall tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 475, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 3125824R1, (Item #: 164006) $21.40
Brake Master Cylinder, Used - For International tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885 (s/n 003083-earlier), 2400A, Replaces International OEM number 527542R92, For a new version of this item use Item #: 116908, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416908) $57.01
Brake O-Ring Kit - For tractor models 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895. Set of 6 O-Rings, 2 for brake piston, 4 for differential bearing carriers. (Item #: 105424, Ref: 539535R91) $37.90
Brake Plate - The measurements on the Brake Plate are ID: 8 1/8 inches (206mm) with 3 tabs, OD: 10 1/4 inches (259mm). This part replaces 399736R3, 984439C1. Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84 (Item #: 105456, Ref: 399736R3) $82.00
Hand Brake Cable - This Hand Brake Cable has an 8mm eyelet on one end and is threaded on the other. It is 36 inches in length. Used on 385, 484, 485, 584, 585, 685, 784, 785, 884, 885. Replaces 1500021C1. (Item #: 105482) $33.84
Master Brake Cylinder - Assembly for Hydro 84, 385, 454, 464, 484, 574, 674, 784, 884, 2400A, 2500A. (Item #: 116908, Ref: 527542R92) $100.00

Clutch
Clutch Disc - 12 inch disc (6 large pads), 1-1/8 inch hub, 10 spline. For tractor models 895, 995, 3210, 3220, 3230, 3400, 3434, 4210, 4220, 4230, 4240, 584, 684, 784, 884. (Item #: 122009, Ref: 85026C3) $155.00
Clutch Disc - For Models: 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number below 703, 495, 574, 584, 674, 684 serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990 11 inch diameter, 1-1/8 inch hub, 10 spline, 6 ceramic pads. Replaces 1944253C1, 293248A1, 3121507R93, 70093C91. (Item #: 122012, Ref: 70093C91) $131.00
Clutch Kit - This new single clutch kit contains a 11 inch, 3 spring, 10 spline 1 5/8 inch hub pressure plate assembly (1500655C92), a 11 inch, 6 pad, 10 spline, 1 1/8 inch hub clutch disc (293248A1), release bearing (405625R91), pilot bearing (537290R91), and pilot tool. Tractors: 384, 454, 464, 484, 485, 574, 584, 585, 674, 684, 784, 884, 2400A, 2400B, 2500A, 2500B, 3500A.70716NC (Item #: 118400, Ref: S.61265) $250.00
Clutch Kit - This remanufactured single stage clutch kit contains a 12 inch, 10 spline, 1 5/8 inch hub, 12 spring remanufactured pressure plate assembly, a 12 inch 10 spline, 1 1/8 inch hub, 6 pad remanufactured clutch disc; new release bearing and new pilot bearing. For 1440, 1460, 1480, 1640, 1644, 1660, 1666, 1680, 1688, 900, 914, 915 (Item #: 202028, Ref: 85025K) $470.01
Clutch Kit - This New Clutch Kit, includes 537290R91 pilot bearing, 158125C91 release bearing, 85025C2 pressure plate-10 spline, 1 5/8 inch hub-12 inch diameter, 85026C3R clutch drive disc-10 spline with 1 1/8 inch hub and 10 spline-1 1/8 inch by 10 spline 1 5/8 inch pilot tool. Fits 3210 PATRIOT, 3220, 3230, 380B LOADER, 4210, 4220, 4230, 4240, 495, 584, 585, 595, 684, 685, 695, 784, 786, 795, 884, 885, 895, 985, 995. (Item #: 115343, Ref: 1712-7070) $410.00
No Picture Clutch Pressure Plate Assembly - New pressure plate assembly, 11 inch, 10 spline, 1-5/8 inch hub. For tractor models 454, 464, 484, 574, 584, 674, 684, 784, 884. (Item #: 150356, Ref: 70716C1) $99.98
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00
Clutch Release Fork - This Clutch Release Fork is used with 1970934C1 Clutch Bearing Carrier when used with a 12 inch clutch and 1971045C1 Clutch Bearing Carrier when used with an 11 inch clutch. Replaces 398342R2. (Item #: 111733, Ref: 398342R2) $79.00
Pressure Plate Assembly, 11 Inch - 11 inch outside diameter, 3 spring-3 finger, 10 spline with 1 5/8 inch hub. Clutch plate for Gas and Diesel applications. 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990. Replaces 1500655C91, 1500655C92, 1500655C93, 1500655R1, 2726336C91, 529566R92, 68211C91, 70716C1, 92602C92, 128005541, 70716. (Item #: 150356, Ref: 68211C91) $99.98
Pressure Plate Assembly, 12 Inch - This is a 12 inch, 10 spline with 1 5/8 inch center hub pressure plate. It is used on 3210 Patriot, 3220, 3230, 380B Indust/Const, 4210, 4220, 4230, 4240, 495, 584 Indust/Const, 595, 684, 685, 695, 784, 795, 884, 885, 895, 985, 995. Replaces 84342556, 85025C2, 85025C2R. (Item #: 110580, Ref: 85025C2) $209.00
Pressure Plate Assembly, 12 Inch - This is a Single Stage Rockford Style Pressure Plate Assembly. It has a 1-5/8 inch 10 spline center. It replaces 85025C91, 84342556. (Item #: 85025C91) $222.02
PTO Clutch Kit - Clutch disc kit for single or dual speed independent PTO using 5 discs and 8 plates. Tractors: Hydro 84, 385, 395, 464, 484, 485, 495, 574 serial number 100001 and up, 84, 585, 595, 674, 684, 684, 685, 695, 784, 885, 2400A serial number 100001, 2500A serial number 100001 and up. For 2400A, 2500A, 385, 395, 464, 484, 485, 495, 574, 584, 585, 595, 634, 674, 685, 695, 784, 884, 885, HYDRO 84. Kit includes, 5 DISCS (401716R2), 8 PLATES (66188C1), 1 O-RING (401723R1), 1 O-RING (401724R1), 6 SPRINGS (66182C1). (Item #: 124694, Ref: 66193C91) $152.00

Cooling System
Fan, 5 Blade - For tractor models 380B, 385, 395, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884. (Item #: 124624, Ref: 1275810C1) $133.00
Fan, 6 Blade - 18.50 inch diameter, 1.250 inch pilot hole, 1.937 inch center to center on mounting bolt holes. For tractor models (2500A, 2500B gas), (574, 674 Hydro with gas), (784 diesel serial number 9413 and up). (Item #: 163844, Ref: 84355C1) $142.00
Radiator - Core size 18.125 inches wide, 18.5 inches high, fits applications with hinged swing out oil coolers. If you have a bolt on oil cooler use radiator 1536373C1. For tractors: 380B, 484, 485, 574 DIESEL, 584 serial number 8271 and up, 585, 684, 685, 784, 885 without AC, Hydro 84. This radiator uses cap part number R2222. (Item #: 101712, Ref: 84524C93) $321.44
No Picture Radiator - For 484, 574 Diesel, 584 (FromS#8271), 684, 784, Hydro 84 (Item #: 101712, Ref: R2743) $321.44
Radiator Cap - This 10 pound radiator cap with cover is used on multiple tractors. It replaces original part numbers 527425R1, 532672R91, 532029R1, 532029R2, 3118639R1, 1500626C91. (Item #: 114950, Ref: 1500626C92) $17.00
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.00
Radiator Hose Lower - Radiator hose, lower. For tractor models (574, 674 diesel), 584, 684, 784, 884 (Item #: 117711, Ref: 402205R1) $14.40
Radiator Hose Upper - Radiator hose, upper, for diesel tractors. For 574, 584, 674, 684, 784, 884, HYDRO 84 (Item #: 117702, Ref: 402207R1) $14.90
Thermostat, 180 Degree - For Diesel models 1046, 1055, 1056, 1255, 1455, 353, 385, 423, 454, 474, 484, 485, 523, 574, 584, 585, 644, 674, 684, 685, 724, 743, 745S, 784, 785, 844, 844S, 845, 856, 884, 885, 946, 955, 956. All with one of the following engines: D358, DT358, DT402, D155, D179, D206, DT239, D239, D246, D268, D310. (Item #: 116901, Ref: 3059676R91) $14.40
Water Pump - For tractor models 380B, 454, 464, 484, 584, 574, 674, 684, 2500A, Hydro 84, 784. Water Pump for a diesel comes with hub installed and a gasket. Replaces 3136053R92-R, 3136053R93, 3132739R94, 3136053N. Casting number 3132677R1, 3132677R2. (Item #: 100792, Ref: 3136053R92) $65.00
Water Pump Hose - Used on International Tractors: 385, 474, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885. Replaces 3144028R1, VPE4122. 1.875 inch inside diameter, 4.75 length. (Item #: 128526) $15.80
No Picture Water Pump - New - With Hub For 454, 464, 484, 574, 584, 674, 684, 784, 2500A, Hydro 84 with D179, D206, D239, or D246 Engine s (Item #: 100792, Ref: WP1729) $65.00

Decals and Emblems
No Picture Decal Set - Hood set for 784. (Item #: 183515, Ref: R3630) $60.00
No Picture Decal Set - Hood only set for 784 Utility. Black Decal Set. (Item #: 100984, Ref: R4233) $82.00
Front Emblem - Plastic "IH", red, black and silver, 3-3/8 inch x 3-1/8 inch. For tractor models 248, 258, 274, 278, 284, 384, 385, 433, 484, 485, 522, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 782, 784, 785, 786, 833, 844, 884, 885, 886, 986, 1086, 1400, 1486, 1586, 3388, 3588, 3788, 4366, 4568, 4586, 4786, 4886, Hydro 84, Hydro 186. (Item #: 122820, Ref: 120397C1) $26.30
International 784 Hoods Decal Set, Vinyl - For International / Farmall tractor model 784, Black and Red stripe (Tri-Stripe), Length: 53-1/2" long, Hood decal only, (Item #: 100983) $82.00

Drive Train
IPTO Drive Shaft - When replacing earlier Independent PTO shafts 398235R1 or 66347C3, you must also replace 71229C1 carrier and 108982C1 seal (not available through Yesterday's Tractors. This shaft has 10 splines and 21 teeth. Used on International models: 454, 464, 484, 574, 584, 674, 684, 784, 884, 2400A (Item #: 124724, Ref: 71230C2) $139.00
Torque Amplifier Clutch Kit - Power shift, 6 friction plates, 4 steel plates, 2 piston seals. For tractor models 684, 784, 884, 485, 585, 685, 885, 395, 495, 595, 695, 895, 995, 4210, 3220, 3230, 4230, 4240, C50, C60, C80, C90, C100. Replaces 401717R3, 401724R1, 402571R1. (Item #: 124618, Ref: 401716R3) $151.00

Electrical System
Alternator - 12 volt, 34 amp. For tractor models (Hydro 84 1978 to 1984 with 256 diesel), (364 1976 to 1977 with 154 diesel), (384 1978 to 1982 with 155 or 179 diesel), (474 1973 to 1976 1973 to 1976), (484 1978 to 1984 with 179 diesel), (584 1978 to 1984 with 206 diesel), (684 1978 to 1984 with 239 diesel), (784 1978 to 1984 with 246 diesel), (884 1979 to 1984 with 268 diesel). Replaces 23765, 23851, 23962. (Item #: 112214, Ref: ALU0004) $114.00
Cab Solenoid Power Switch - This Cab Solenoid Power Switch is 100 amp, continuous duty type. It is used on multiple Case and CaseIH models. It replaces part numbers 107655C1, 47388608, 537067R2, 66581C3, 22-608. (Item #: 115718, Ref: 107655C1) $35.00
Fender Harness - Right Hand - For International / Farmall tractor models Hydro 84, 584, 684, 784, 884 (all with flat top fenders), Replaces International OEM number 3123680R3, (Item #: 124638) $85.72
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $28.60
Starter - STARTER For 385, 395, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 884, 885, 895, 995 Replaces Lucas 27508B (Item #: 104180, Ref: 537140R96) $170.00
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (474 1973 to 1976), (484 1978 to 1984 with D-179 diesel), (584 1978 to 1984 with D-206 diesel), (684 1978 to 1984 with D-239 diesel), (784 1978 to 1984 D-246 diesel), (884 1979 to 1984 with D-268 diesel). Replaces 26428. (Item #: 104180, Ref: SLU0013) $170.00
Starter Drive - Clockwise rotation, 10 teeth. Fits Lucas 26428A and Magnetti Marelli starters. For tractor models Hydro 84, 385, 395, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 884, 885, 895, 995, 3220, 3230, 4210, 4230, 4240. (Item #: 112574, Ref: 84209C2) $45.90
Starter Motor - Fits 454, 474, 574, 674, 484, 584, 684, 784, 884, 6858, 485, 485XL, 585, 585XL, 685, 685XL, 785, 785X, 885, 885XL, 985XL, 395, 495, 495XL, 595, 595XL, 695, 695XL, 795, 795XL, 895, 895XL, 995XL, 2310, 3220, 3230, 4210, 4220, 4230, 4240, 84 Hydro. Replaces these starter numbers in the above models: B514002, SLU0013, TS-1212, TS-4030, 1107867, 114568A1, 114568A2, 114568A3, 189330A5, 1998343, 230428A1, 230428A3, 537140R91, 537140R96, SDR0214. (Item #: 104180, Ref: 537140R95) $170.00
Starter Switch - This starter switch fits Hydro 84, 354, 384, 484, 485, 584, 684, 685, 784, 884, all when using an original starter. Replaces OEM part numbers: 3072122R93, 3072122R94, 705383R91. (Item #: 154742, Ref: E1ADDN11500) $21.80
Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.60
Switch - Ignition switch, 6 prongs, includes 2 keys. For tractors: Hydro 84, 354, 454, 464, 484, 574 to serial number 114908, 584, 674, 684, 784, 884, 2300, 2400, 2500 to serial number 114908. For H, HV, M, MD, MDV, MTA, MV, Super M. (Item #: 111509, Ref: 529800R91) $11.98
Switch, Lamp and Horn - Lucas type. Used on 484, 584, 684, 784, 884. Replaces 3121404R1, K262014, 34952, 54033364. (Item #: 124742, Ref: 1502378C1) $18.90

Engine Bearings
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $7.00

Engine Gaskets
Conversion Gasket Set - Lower - For International / Farmall tractor models Hydro 84, 544, 574 (Engine s/n D103203-later), 584 (Engine s/n D319017), 585, 624, 654, 664, 674, 684 (Engine s/n D475097), 685 (Engine s/n D679081-later), 784, 884 (Engine s/n D052919-later), 885, 2500 (Engine s/n D103203-later), 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7, TD7 (E, Engine s/n 53692-later), TD8 (C), TD8 (E, Engine s/n 5988-later), 100, 100 (E, Engine s/n 53692-later), 125, 125 (C), 125 (E, Engine s/n 5988-later), 250A (Gear Drive, Engine s/n 640235-later), 260A (Engine s/n 706836-later), 270A, Compatible with International Engine (s) D206, D239, D246, D268, DT268, Compatible with International Hay Cutting (s) 275, 375, 4000 (Engine s/n D021186), 5000 (Engine s/n D021186), 5500 (Engine s/n D021186), Replaces International OEM number 1967011C1, 3136813R99, 3228431R92, Replaces McCormick OEM number 3228431R92, Contains all gaskets necessary to complete an overhaul that are not included in head set, (Item #: 106727) $63.00
Rear Crank Seal Diesel - For the Following engines: D327-4, TD327-3, DT268 Turbo Diesel, D155 Diesel, D179 CID, D206 CID, D226-B6, D226-3, D226-4, D226-6, D227-4, D227-6, D239 CID, D246 Diesel, D268 Diesel, D310 CID, D325-2, D325-3, D327-2, D327-3, D358 CID, TD226-B6, TD226-4, and TD228-6. Inside diameter 110mm, Outside diameter 130mm, Width 12.7mm. Does not include wear sleeve. Order RP301113 if wear sleeve is need. Replaces 7701021418, 6005605198, 3138701R91, X550174902000, 89965016008 (Item #: 106657, Ref: 3138701R91) $21.80
Rear Crank Wear Sleeve - This Rear Crankshaft Seal is used for 110mm rear crankshafts on: D155 Diesel Engine, D179 Diesel Engine, D206 Diesel Engine, D239 Diesel Engine, D246 Diesel Engine, DT268 Diesel Engine, D310 Diesel Engine, D358 Diesel Engine. Used with 3138701R91 Seal (not included). (Item #: 106658, Ref: RP301113) $150.00

Engine Rebuild Kits
Engine Rebuild Kit - Less Bearings - ESN D123040-earlier, D246 - For International / Farmall tractor models Hydro 84, 784, 844 (Canada), Compatible with International Construction and industrial models T6 (s/n 7610-earlier), Compatible with International Engine (s) D246 (diesel, s/n D123040-earlier), Bore: 100mm, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106610, (Item #: 130614) $890.00
Engine Rebuild Kit - Less Bearings - ESN D123041-later, D246 - For International / Farmall tractor models Hydro 84, 784, 844 (Canada), Compatible with International Construction and industrial models T6 (s/n 7610-earlier), Compatible with International Engine (s) D246 (diesel, s/n D123041-later), Bore: 100mm, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106610, (Item #: 130944) $890.00

Engine Parts
No Picture Camshaft Bearing Set - For International / Farmall tractor models Hydro 84, 544, 574, 584, 585, 624, 654, 664, 674, 684, 685, 784, 844, 884, 885, 2500A, 2500B, 2544, 3514, Compatible with International Combine (s) 105, Compatible with International Construction and industrial models TD7 (E), TD8 (E), TD8 (C), 100 (E), 100, 125 (E), 125 (C), 125, 250A, 260A, 270A, 584, 2500B, 2505B, 2510B, Compatible with International Engine (s) D206, D239, D246, D268, D358, Compatible with International Hay Cutting (s) 275, 375, 4000, 5000, 5500, 5 journal camshaft, finished I.D., (Item #: 186179) $104.00
Connecting Rod, Reconditioned - The Reconditioned Connecting Rod is used in 454, 464, 574, 674, 484, 684, 784, 884, 485, 585, 685, 785, 885, 495, 595, 695, 895, 2400, 2500, 3400, 3500, 3600, 250A, 260A tractors with D-179, D-239, D-246 Engines. Replaces 1967032C1 and 3055030R24. There is a core charge of $25, when you return your old part, we'll refund the core. (Item #: 210200, Ref: 3055030R24) $109.01
Crankshaft - For tractor models 684, 685, 695, 784, 4210, 4230, (4240 with D239 engine). Replaces 3144626R91, 3144626EX, 3132928R94, 3132752R11, 3132982R94, 3132928R93, 3132928R92, 3132928R91, 3132982R93, 3132982R92, 3132982R91, 3055038R21, 3055790R91 (Item #: 100784, Ref: 3144626R92) $709.00
Crankshaft Balancer Gear - This Balancer Gear is used on D206, D239 and D246 Engines. It has 80 teeth. Replaces 3136237R1. (Item #: 158267, Ref: 3136237R1) $116.00
Crankshaft Gear - This Crankshaft Gear has 33 teeth. It is used on D155, D179, D206, D239, D246 and D268 Engines. Replaces original part number 3055028R1. (Item #: 150037, Ref: 3055028R1) $155.00
Flywheel - Flywheel assembly with ring gear. 12 inch diameter. Tractors: 574, 584, 585, 595, 684, 685, 695, 784, Hydro 84, 3230, 4210. Weight: 88.5 pounds. Additional $20 shipping due to weight. (Item #: 103897, Ref: 1808412C92) $608.00
Flywheel - With Ring Gear. For 574, 584, 595, 674, 684, 784, with D239 engine and 11 inch clutch. 126 teeth on ring gear. Replaces 3136044R42. (Item #: 103903, Ref: R2921) $460.00
No Picture Flywheel - With Ring Gear. For 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784 with D239 engine and 12 inch clutch. (Item #: 103897, Ref: R2922) $608.00
Ring Gear - For 385, 395, 454, 464, 484, 485, 495, 574, 584, 595, 684, 685, 695, 784. Flywheel Ring Gear. 126 tooth, 15.93 inch outside diameter, 14.625 inch inside diameter, .562 inches wide. (Item #: 103898, Ref: 60883H) $49.50
Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70
Valve Train Kit - For International / Farmall tractor models 544, 574, 584, 585, 664, 674, 684, 784, 785 (diesel), 884, 885, 2500, 2500A, 2500B, Engine (s): D206, D239, D246, D268, Includes: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs, Valve Keepers, (Item #: 120318) $291.00

Engine Rings
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Hydro 84, 784, 844, Compatible with International Engine (s) D246, Replaces International OEM number 3218669R91, Bore: 3.937" (100mm), Rectangular top, Top Groove Size: .125" (3.17mm), 2nd Groove Size: .094" (2.38mm), 3rd Groove Size: .188" (4.76mm), Sold per cylinder, (Item #: 120869) $39.50

Exhaust System
Exhaust Elbow - This Exhaust Elbow is for tractor models 574, 584, 585, (595, 895 up to SN# JJE0014501), 674, 684, 685, 695, 784, 785, 884, 885. (Item #: 160787, Ref: 3136668R1) $112.00
Exhaust Elbow Gasket - For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 160788, Ref: 3136248R1) $3.40
Exhaust Manifold Gasket - Manifold to head, sold individually 4 required for application. For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 101558, Ref: 3132434R1) $4.10
Exhaust Pipe - For tractor models 584, (585 from 1986 and up), 595, 684, 784, 884, 885. (Item #: 160786, Ref: 80547C1) $34.40
Manifold - For tractor models 474, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 895, 3230, 4210, 4220, 4230. (Item #: 124679, Ref: 3136066R12) $177.00
Muffler and Pipe assembly - For Hydro 84, 385, 484, 584, 684, 784, 884. Vertical muffler and pipe assembly. Oval muffler, 28 inch curved end pipe. One piece assembly, 46 inches overall length, muffler 18 inch length, 2 3/8 inch inside diameter inlet. Can replace 83027C1 and 83028C1. (Item #: 100285, Ref: 84738C2) $95.00
Muffler, Vertical - Oval body. Inlet 2-3/8" I.D, outlet 2" O.D, 46" overall length. For tractor models 385, 395, 484, 485, 495, 584 Indust/Const, 595, 684, 685, 784, 884, 885, 895, 985, Hydro 84. Replaces 83027C1, A173180, A173180GV, CA-24. (Item #: 100285, Ref: 83027C1) $95.00
Muffler, Vertical - Oval body 4 inches by 8 inches dimension, 3 inches inlet length, 2-3/8 inch inlet I.D., 19 1/2 inch shell length, 23 1/5 inch outlet O.D., 2 inch outlet O.D., 46 inches overall length. For tractor models 784, 674, 884, 584, 385, 464, 684, 454, 484, 885, 2400, 574, 485, 585, 685, all built from 1982 with diesel engine. (Item #: 100285, Ref: 83207C1) $95.00

Fuel System / Air Intake
Air Filter, Outer Element - Heavy duty filter with more pleats and depth providing greater filtering surface. Microlite outer air element with fins. Outside diameter 5-1/4 inches, length 11-3/8 inches, gasket attached. Fits 240, 250, 260, 270, 484, 485XL, 584, 585XL, 674, 685XL, 784, 785, 884, 885, HYDRO 84. (Item #: 124844, Ref: 1265510C1) $24.90
Fuel Bowl - CAV type fuel bowl. 3-5/8 inch outside diameter, 11/16 inch inside diameter screw hole. Used with diesel engines. For 105, 275, 375, 464, 484, 574, 584, 674, 684, 784, 884, HYDRO 84. (Item #: 112513, Ref: 3132197R1) $5.00
Fuel Bowl Glass - Fuel bowl, glass, 3-5/8 inch diameter, 3/8 inch bottom hole, for diesel engines. To engine serial number 120520. For 2400A, 454, 464, 484, 574, 584, 664, 674, 684, 784, HYDRO 84. (Item #: 107042, Ref: 3144478R1) $9.70
Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on International 105 Combines, 464, 484, 574, 584, 674, 784, Hydro 80. Replaces original part number 3122197R1, 3132197R91 (Item #: 112513, Ref: 1039071M1) $5.00
Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.10
Fuel Filter, CAV type - Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20
Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $33.00
Fuel Sediment Bowl - Sediment bowl with a center hole inside diameter of 1 inch. 2 inches in height. 3.689 inches outside diameter on the gasket mounting flange, and a bowl outside diameter of 3.3 inches. This bowl has a flat bottom with a squared edge. For the following diesels with original CAV filter: Hydro 84, 354, 384, 584 with engine serial number 318210 and up, 784 with engine serial number 120521, 785 with engine serial number 120521, and 884. Replaces 3069610R1 (Item #: 112644, Ref: 1024386m1) $5.20
Fuel Shutoff Valve - The threads on this fuel shutoff valve are 1/2 - 20 and 3/8 - 18 NPTF. Used on C50, C60, C70, C80, C90, C100, 385, 395, 485, 495, 585, 595, 685, 695, 785, 885, 895, 995, 3220, 3230, 4210, 4230, 4240, Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2400A, 2500, 2500A (Item #: 135040, Ref: 528926R1) $23.90
No Picture Injector Nozzle - For tractor models (484 up to SN# 379591), 684, 685, 695, 784, 884, 885, 895, 995, H84. Replaces DLLA150S815. (Item #: 179907, Ref: 3218251R2) $40.70
Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 218349A1, 162000090701, A77616, 3112805R91, K928523, 3118299R1 (Item #: 118792, Ref: 3583543M2) $11.50
Stop Cable - For International / Farmall tractor models Hydro 84, 385, 484 (s/n 6308-later), 485, 584 (s/n 3936-later), 585 (Without Cab), 684 (s/n 7233-later), 685, 784 (s/n 7113-later), 884 (s/n 6621-later), 885 (All Diesel), Replaces International OEM number 3234947R2, Length: 50-1/2", (Item #: 124596) $37.90
No Picture Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $6.40

Gauges
No Picture Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $27.74
No Picture Tachometer Cable - This tachometer cable is 58 3/8 inches long for models: Hydro 84, 3514 with C175 gas, (385, 484, 485, 584, 684, 784, 785, 884 all without cab), (666, 686, 706, 756, 766 806, 826, 856 all with gas), 544 rowcrop with gas, 656 gas or diesel, (hydros 2400, 2500, 454, 464, 574, (585, 685, 885 without cab. Replaces 393326R92, 529234R1. (Item #: 111325, Ref: 384843R91) $27.74
Tachometer Gauge, Remanufactured, 66455C1 - For International / Farmall tractor models 454, 464, 484, 574 (s/n 100001-later), 584, 674, 684, 784, 884, 2400A (s/n 100001-later), 2500A (s/n 100001-later), Replaces International OEM number 66455C1, (Item #: 204000) $158.01
Temperature Sender - This water temperature sending unit is used on International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. It replaces 3073787r1, 3127956R1, 709280R91 (Item #: 155914, Ref: 3127956R1) $14.00
Tractometer - This Tractometer fit most gas and diesel models 454, 464, 574 Hydro, 674, 484, 584, 684, 784, 884, 885, 2400, 2500A Hydro (serial number 100001 and below). S61427 Tractometer replaces 66455C1, 3121926R91, 3125106R92. (Item #: 110414, Ref: 66455C1) $46.00
Tractormeter Cable - Cable Housing is 70 inches long. For tractor models 3210, 3220, 3230, 385, 4210, 4220, 4230, 4240, 484, 485, 584, 585, 585A, 595, 684, 685, 685A, 685XL, 695, 784, 785, 785XL, 795, 85XL, 884, 885, 885XL, 895. Replaces 537494R91, 1536644C1, 1500492C1, 1500716C1, 402024R91. (Item #: 121529, Ref: 537494R91) $30.70
No Picture Tractormeter Cable - Cable Housing is 58 inches long. Ends are 5/8 inch and 7/8 inch UNF. For tractor models 484, 584, 684, 784, 884, 385, 485, 585, 685, 785, 885. (Item #: 111325, Ref: 529234R1) $27.74
Water Temperature Gauge - This Water Temperature Gauge is used on: International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. Replaces 3127959R3, 3127959R4, 709280R91. Does not include sender. Use 3127956R1 sending unit if needed. (Item #: 113474, Ref: 3127959R3) $34.00

Hitch / Drawbar
Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50
Leveling Box Assembly - 22-3/4 inch minimum length, 28 inch maximum, spacing between fork is 1 inch. Catagory 1. For tractor models 474, 475, 574, 584, 674, 684, 784, 884. (Item #: 184602, Ref: S.14874) $187.50
Leveling Box Assembly, RH, Cat I - For tractor models 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 784, 884. Measures 23 3/4 inch minimum, 28 inch maximum, 1 7/8 inch gap in yoke for thick lift arm. (Item #: 180468, Ref: 223320) $178.75
Leveling Box Fork - This Leveling Box Fork is 14.50 inches long, has a 1-5/8 inch fork width and 0.875 inside diameter. This is a CAT II part. It is used on 3220, 3230, 395, 4210, 4230, 4240, 495, 574, 584 Indust/Const, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995. It is used with 527937R1 Nut, not included. Replaces 402635R4. (Item #: 110393, Ref: 402635R4) $74.00
Leveling Fork Nut - This Leveling Fork Nut is used with 3121964R1 and 402635R4 fork. Replaces original part number 527937R1. (Item #: 110735, Ref: 527937R1) $7.00
Leveling Rod Fork - Housing, leveling screw. Cat I. (14.500 inches long) 1 inch wide fork. Tractors: Hydro 84, 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595 with fixed lower link, 674, 684, 685 with fixed lower link, 695, 784 with fixed lower link, 895, 995 ; 3220, 3230 with out telescopic lower link; 4210, 4230, 4240 with out telescopic lower link. (Item #: 108812, Ref: 3121964R91) $73.00
Leveling Screw Bearing - For International / Farmall tractor models B414, Hydro 84, 354, 384, 385, 424, 454, 464, 484, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, Compatible with International Construction and industrial models 2300A, 2400, 2424, 2444, 2500, Replaces International OEM number 3069064R1, (Item #: 124568) $40.00
Leveling Yoke Left Hand - This Left Hand Leveling Yoke is 19.250 inches long and 0.875 inch, 9 UNC thread. It replaces original part numbers 527935R1, 527948R91 (Item #: 124678, Ref: 527948R91) $33.10
Lift Yoke Assembly, LH, Cat I - For tractor models 574, 585, 595, 674, 684, 685, 695, 784, 884, Hydro 84 all with fixed arms. (Item #: 124552, Ref: 223318) $88.00

Hydraulic System
Filter, Hydraulic Oil - 5 inch outside diameter, 1-15/16 inch inside diameter, 3 inches tall. For tractor models (454, 574 syncromesh), 464, 574, 484, 584, 684, 784, 884, 385. (Item #: 110865, Ref: 530144R92) $17.70

Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.40
Rotary Light Switch - The outside diameter thread is 0.685 inches on this 6 spade terminal rotary switch. It is used on International models: Hydro 84, Hydro 86, Hydro 186, 140, 464, 574, 674, 384, 385, 484, 584, 684, 686, 4568, 784, 786, 884, 886, 986, 1086, 1486, 1586, 4186. Replaces 107200C1, 107200C2, 1-1288, IHS3234 (Item #: 153433, Ref: 107200C2) $35.00
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50
Sealed Beam Bulb 12V - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Oil System
Engine Oil Pan, Used - For International tractor models Hydro 84, 248 (s/n 18000-later), 258, 268, 278, 574, 584, 585, 674, 684, 685, 784, 785, 2500A, Compatible with International Engine(s) D206, D239, D246, D268, Replaces International OEM nos 3136055R94, 3136055R95, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436863) $540.01
No Picture Oil Filter - This spin on filter replaces filter numbers 1329020C1, 1329020C2, 3059246R91, 3059246R92, 3132737R91, 3132737R93, 397868R1, 398080R2, 427207C2, 427207C3, 528250R1. Measures 7-1/8 inch Length 3-11/16 inch O.D. 1-1/2 quart capacity 1 inch x 12 inch threads Filter can replace shorter (5.370 inch tall) filter for more capacity, where filter height is not an issue. For models 1046, 1055, 1246, 1255, 1468, 1568, 288, 3088, 3210, 3230, 3288, 353, 383, 385, 395, 4220, 423, 4230, 433, 440, 453, 474, 533, 540, 554, 564, 584, 595, 624, 644, [ 706, 756 ( (both with D310 German diesel)) ], 733, 740, 784, 795, 844, 884, 885, 886, 895, 946, 955, 956, 995. Verify part number and measurements. (Item #: 111055, Ref: 398080R2) $18.30
Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $10.10
Oil Pressure Switch - For tractor models Cub 154, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2400A, 2500A, 2706, 2756, 2826, 2856, 3388, 3588, 3788, 385, 454, 464, 484, 485, 574, 584, 6388, 6588, 674, 6788, 684, 716, 756, 766, 784, 786, 806, 826, 856, 884, 966, 986, Hydro 100, Cub 185 Lo-Boy. (Item #: 124745, Ref: 3129031R91) $15.00
No Picture Oil Pump Assembly, Pump Center - 1.175 inch suitable for 4 cylinder applications. For tractor models with D239 Engine: (UK series 258, 268, 288, 474, 574, 674, 584, 684, 784, 884, 585, 585XL, 685, 685XL, 785, 785XL, 885, 885XL, 595, 595XL, 695, 695XL, 795, 795XL, 895, 895XL, 995XL, 3230, 4210, 4220, 4230, 4240, 84), (Hydro European 624, 654, 724, 824, 733, 833, 740, 840, 940, 644, 744, 844, 844S, 844XL, 743, 743XL, 745S, 745XL, 845, 845XL). (Item #: 112409, Ref: 3136430R95) $210.00

Seats
Backrest - Vinyl, Black - Replaces International OEM nos 3123336R2. Backrest has steel core and 2" foam cushion.3-hole bolt pattern.``Cushions bolt to the original seat frame. Compatible with International Tractor(s) 484, 584, 684, 784. (Item #: 150971) $142.00
Seat Cushion - Vinyl, Black - Replaces International OEM nos 3121421R92, 3123332R2. Seat has steel core and 3" foam cushion. Cushion bolts to the original seat frame with 2 stud bolts. Compatible with International Tractor(s) Hydro 84, 484, 584, 585, 684, 685, 784, 884, 885. (Item #: 150970) $176.00
No Picture Seat Mounting Bracket - ADAPTER PLATE, FOR MOUNTING TISCO BRAND TS SERIES ADJUSTABLE BASE SUSPENSION SEATS ON INTERNATIONAL TRACTORS: HYDRO 84, 454, 464, 574, 674, 584, 684, 784. For 454, 464, 484, 574, 584, 674, 684, 784, HYDRO 84 (Item #: TS424SB) $43.19
Seat Mounting Plate - This plate adapts most grammer style seats to fit Models: 454, 464, 574, 584, 585, 674, 684, 685, 784, 785, 885. Note: this mounting plate is not original. This will adapt all seats in A&I seat catalog number CT548 pages 5, 6, 7 and 8. (Item #: 172991, Ref: SMP100) $70.00

Sheet Metal / Body Parts
Battery Door, Metal - This Battery Door is a metal replacement for original fiberglass. It is 18 1/8 Inches Long. Fits the following through 1985: 385, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 785, 884, 885. Also fits all years of 395. Replaces: 1536764C1, 3121393R91 (Item #: 104334, Ref: 3121393R91) $115.00
Battery Door, Original - This is an original fiberglass Battery Door. It is 15-5/8 inches wide and 18-5/16 inches long. It does not include hardware. This part is gel coated red for protection. It has a wax releasing agent. It must be prepped before painting. Fits the following through 1985: 385, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 785, 884, 885. Also fits all years of 395. Replaces: 1536764C1, 3121393R91 (Item #: 104334, Ref: 1536764C1) $115.00
NOTE Cab Glass - We have cab glass for: 384, 385, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885. Call for your specific application.	NOTE
Fender, LH - Hi flat top. For tractor models 584, 585, 684, 685, 784, 884, 885. Additional $50 shipping due to size and weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103993, Ref: 3123648R2) $427.00
Fender, LH, Hi-Crown - For tractor models 584, 585, 595, 684, 685, 695, 784, 884, 885, 895. Additional $20 for shipping will be charged due to size/weight of this item. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113787, Ref: 538641R4) $180.00
Fender, RH, Hi-Crown - For tractor models 584, 585, 595, 684, 685, 695, 784, 884, 885, 895. ** Add $20 for shipping due to size/weight ** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113788, Ref: 136165A1) $246.37
Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $215.00
Front Side Panel, Left - This fiberglass Front Side Panel is 11-1/2 inches tall and 14-3/8 inches at the longest point. It must be wet sanded and painted. It fits: 484, 485, 584, 585, 684, 685, 784, 785, 884, (885 4 wheel drive), all through 1985. Replaces: 3121395R1. (Item #: 180169, Ref: 3121395R1) $175.00
Front Side Panel, Right - This fiberglass Front Side Panel is 11-1/2 inches tall and 14-3/8 inches at the longest point. It must be wet sanded and painted. It fits: 484, 485, 584, 585, 684, 685, 784, 785, 884, (885 4 wheel drive), all through 1985. Replaces: 3121396R1. (Item #: 180170, Ref: 3121396R1) $128.51
Front Weight Locking Cam - This Front Cast Weight Locking Cam has an overall length of 3-1/2 inch. Two (2) used per tractor, priced and sold individually. Fits: Hydro 100, Hydro 186, Hydro 70, Hydro 84, Hydro 86, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 274, 284, 3088, 3288, 3488, 3688, 385, 484, 5088, 5288, 544, 5488, 584, 656, 664, 666, 684, 686, 766, 784, 786, 884, 886, 966, 986; Replaces: 536044R1, 74202C1 (Item #: 152234, Ref: 536044R1) $37.30
Gas Strut Spring Cylinder, Rear Window - For International / Farmall tractor models 384, 385, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885, Replaces International OEM number 3118430R1, Rod Diameter: .315", Cylinder Diameter: .709", Overall Length: 11.22", Piston Stroke: 3.973", (Item #: 113224) $15.98
Grill - Front Grill measures 18 inches wide, 17.56 inches tall and 1.08 thick. For models: Hydro 84, 384, 385, 484, 584, 684, 784, 884. (Item #: 153878, Ref: 3121672R1) $108.00
Lower Grille Support Housing - For International / Farmall tractor models 484 (2WD), 485 (2WD), 584, 585, 684, 685 (4WD), 784, 785 (4WD), 884, 885 (4WD), Replaces International OEM number 3121231R1, Made of fiberglass, Width: 20.5", Height: 19.75", (Item #: 123792) $90.00
No Picture Lower Grille Support Housing, Used - For International tractor models 484 (2WD), 485 (2WD), 584, 585, 684, 685 (4WD), 784, 785 (4WD), 884, 885 (4WD), Replaces International OEM number 3121231R1, Made of fiberglass, Width: 20.5", Height: 19.75", For a new version of this item use Item #: 123792, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435837) $98.01
Radiator Grille Surround - For International / Farmall tractor models Hydro 84, 268, 278, 684, 685, 784, 785, 884, 885, Replaces International OEM number 3121233R1, (Item #: 163942) $149.98
Suitcase Weight with IH Logo, Small Handle, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 258, 268, 274, 284, 385, 433, 434, 454, 464, 474, 484, 544, 585, 633, 656, 664, 666, 674, 684, 685, 686, 733, 766, 784, 786, 826, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 2544, 2656, 2826, Replaces International OEM nos 383393R2, 71200C1, 100 lbs, IH Logo, Small Handle, No "L" Cutout, Curved Bottom, Color may vary, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430803) $147.01
Top Grille - For International / Farmall tractor models 248, 384, 385, 484, 485, 684, 685, 784, 785, 884, 885, Replaces International OEM number 3121663R1, Comes primered (color may vary). Prior to painting check fitment, (Item #: 155848) $161.00
Upper Grill Assembly - This Upper Grill Assembly is used on 384, 385, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885 and Hydro 84. It replaces original part number 3121675R2 (Item #: 154015, Ref: 3121675R2) $260.00

Steering
Axle Knee Left Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108811. Replaces 3116436R91 (Item #: 108810) $333.98
Axle Knee Right Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108810. Replaces 3116437R91 (Item #: 108811) $191.98
Bushing, Front Axle Steering Arm - For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. Replaces 153687C1. (Item #: 104494, Ref: 405574R1) $7.00
Bushing, Front Axle, Steering Arm - Associated with 379555R11 steering arm. For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. (Item #: 104493, Ref: 379748R1) $9.80
Front Axle Bolt - Used to secure front axle knees, this bolt measures 4-3/4 inches overall, 4 inches to the shoulder and has 3/4-16 UNF RH Thread. If nuts are needed, order 116643. Replaces part number 405584R1 (Item #: 124558) $9.90
Front Axle Nut - Used with part number 124558 to secure axle knees, this nut is 3/4 inch -16 UNF thread. Replaces 405576R1 (Item #: 116643) $2.50
Front Axle Pivot Shaft - This Front Axle Pivot Shaft is 13.250 inches Long. It is used on 2400, 2500A, 380B, H84, 385, 395, 454, 464, 484, 485, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895, CX100, CX50, CX60, CX70, CX80, CX90. Replaces 405564R91, 405577R1, 405577R2, 527790R91, 538688R91, 539128R1 (Item #: 124722, Ref: 539128R1) $218.00
Front Bolster - For International / Farmall tractor models Hydro 84, 248, 268, 385, 484, 485, 584, 684, 685, 784, 884, 885, Replaces International OEM number 3121169R4, (Item #: 124586) $1349.01
MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28
Power Steering Clevis End - This Power Steering Clevis End has a pin hole of 20 MM (.787 inches) and fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Item #: 113280, Ref: 3125306R1) $42.50
Power Steering Cylinder - Complete cylinder with 1 inch diameter shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 400587R1, 549667R91, 549667R93, 188842A1, 549667R92, 84336125. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 104583, Ref: 188842A1) $277.00
Power Steering Cylinder End - From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95) $93.24
Power Steering Cylinder Plate - Used on 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 495, 584 Indust/Const, 595, 674, 684, 685, 695, 784, 785, 795, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, MX100C, MX80C, MX90C (Item #: 124616, Ref: 405580R21) $40.00
Power Steering Cylinder Rod - Used on UK built International 2 wheel drive tractors, this part replaces 549668R1, 549668R2, 188851A1, 549668R3, 188854A1. Used on 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C (Item #: 182916, Ref: 549668R1) $296.00
No Picture Ring Gear and Pinion Set, Used - For International tractor models Hydro 84, 268, 278, 584, 674, 684, 685, 784, 785, 884, 885, Replaces International OEM nos 65779C1, Teeth: 11/ 52, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434313) $540.01
Seal Kit, Power Steering Cylinder - For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 115098, Ref: 55355C91) $40.00
Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80
Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36) $1.10
Spindle, RH/LH - This spindle measures A= 9.50 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 104328, Ref: 3125872R91) $287.51
Spindle, RH/LH - This spindle measures A= 8.312 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 268, 278, 3230, 4210, 4230, 4240, 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, 995, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 100846, Ref: 3121270R91) $178.00
Spindle, RH/LH - This spindle measures A= 11.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 268, 278, 3230, 4210, 4240, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 104329, Ref: 3121261R91) $214.00
Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.50
Steering Arm Assembly - For International / Farmall tractor models Hydro 84, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 67499C91, (Item #: 158746) $560.00
Steering Arm, Left Hand - This is a left hand steering arm use on adjustable front axel. 52 inch to 77 inch Used on IH models 268, 278, 3230, 4210, 4230, 4240, 584 Indust/Const, 585, 684, 685, 695, 784, 785, 884, 885, 895, 995, CX100, CX70, CX80, CX90, Hydro 84 Replaces 3121263R1 (Item #: 124740, Ref: 3121263R1) $369.00
Steering Arm, Right Hand - This Right Hand Steering Arm is used on 268, 278, 3230, 4210, 4230, 4240, 585, 595, 684, 685, 695, 784, 785, 884, 885, 895, 995, CX100, CX70, CX80, CX90, Hydro 84. It replaces 3121264R1 (Item #: 124741, Ref: 3121264R1) $33.98
Steering Bar Assembly - For tractor models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 84 Hydro, 884, 885, 885XL, 895, 895XL, 995XL. (Item #: 124616, Ref: 405580R11) $40.00
Steering Motor, Hydrostatic - No relief valve. For tractor models (385, 484, 485, 585 up to serial number 18001), 684, 685, 784, 884, 885, 380B. (Item #: 104262, Ref: 67698C93) $449.00
Steering Motor, Hydrostatic - Models without relief valve. 248, 258, 268, 278, 385, 484, 485, 584 Indust/Const, 684, 685, 784, 884, 885. Replaces 67698C91, 67698C92, 67698C93, 67698C94 (Item #: 104262, Ref: 67698C92) $449.00
Steering Shaft, Hydrostatic Motor - 9 inches overall length. For tractor models 385, 484, 485, 584, (585 less cab up to serial number 18001 with heavy duty front axle), (684 with heavy duty front cast axle), (685, 885 less cab), 784, 884, 380B. (Item #: 153931, Ref: 3121187R91) $71.00
Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $50.00
Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40
Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10
Tie Rod - Tie rod end, outer, recess for set screw (7) at bottom, 15 inch to center of post, .812 inch rod diameter. Used on tie rod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 80. For tractor models Hydro 84, 385, 395, 484, 485, 495, 584 except utility For 385, 395, 484, 485, 495, 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84. Replaces 3116406R3, 1332805C1, 3125171R1, 1332805C2. (Item #: 100865, Ref: 3116406R3) $31.00
Tie Rod - Tie rod end, inner, right hand thread, 3-7/8 inch to center of post. 0.875 Inch x 16 RH Thread. Used on tierod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 80 on tractors: Hydro 84, 385, 395, 484, 485, 495, 584, 684, 784, 884. 52 to 82 on tractor For 385, 395, 484, 485, 495, 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84. (Item #: 100864, Ref: 3116407R3) $17.20
Tie Rod - Tie rod end, outer, recess for set screw (6), 14-1/8 inch to center of post. Used on tie rod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 77 on tractors: Hydro 84, 595, 684, 685, 695, 784. 884, 885, 895, 995.52 For 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84 (Item #: 100872, Ref: 3125171R2) $36.90
Tie Rod - Short tie rod, 3.062 inches long, .687 inch diameter, 18 right hand thread. For 2400A, 2500A, 385, 484, 485, 574, 584, 674, 784, 884, HYDRO 84. (Item #: 100863, Ref: 527658R91) $21.10
Tie Rod - Tie rod end, outer, notched {7}, 15 inches to center of post, .750 inch diameter. For tractor models 2400A, 2500A, 385, 484, 485, 574, 584, 674, 684, 784, 884, HYDRO 84. (Item #: 100871, Ref: 65079C91) $32.30
Tie Rod - A= 4.16 inch, B= M30 x 1.5 inch inside diameter right hand thread. For tractor models 258, 268, 278, 584, 585, 684, 784, 785, 884, 885, Hydro 84 all with 4WD. (Item #: 124763, Ref: 1502269C2) $65.98
Tie Rod Assembly - This Tie Rod Assembly is used on Adjustable Straight Axles (52 Inches to 82 Inches Tread Width). It Replaces 3125171R2, 3125171R3, 1332805C2, 3116406R3, 3116406R4, 3116406R5, 3116321R93, 1538016C1. (Item #: 156878, Ref: 1538016C1) $131.18
Tie Rod Assembly, Complete - Due To Multiple OEM Styles, Individual Pieces May Not Fit Models Listed, But Can Use Assembly As A Replacement. Assembly Consist Of: (1) 65079C91, (1) 527658R91, (1) 67529C1, (1) 390686R1, (1) 43747D. 65079C91: Stud Taper= .606 To .700 inches, 527658R91: Stud Taper= .606 To .700 inches. Used on 574, 2400A Straight Front Axle serial number 100006 and up, 2500A Straight Front Axle serial number 100004 and up, 385 Straight Front Axle, 454 Straight Front Axle serial number 100006 and up, 484, 485, 495 Straight Front Axle, 584 Adjustable Straight Front Axle, 585, 595 Adjustable Straight Front Axle, 674 Straight Front Axle, 684, 695 Adjustable Straight Front Axle, 784, 884, 885 below serial number 3083. (Item #: 124766, Ref: 223326) $130.00
Tie Rod Clamp - Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50
Tie Rod End - Used on the following with non-adjusting Cast I Beam front axles: 574, 2400A, 2500A, 2544, 2656, 380B, HYDRO 84, 454, 484, 485, 495, 544, 584, 585, 595, 595XL, 656, 684, 685, 685XL, 784, 884, 885, 885XL, 895, 895XL. A= 4.00 inch, B= 13/16 inch, 16 left hand thread. Replaces 379326R91 (Item #: 104593, Ref: C5NN3A300C) $25.40
Tie Rod Tube - This Tie Rod Tube is 16.187 inches long and with 7/8 inch 16 thread. It replaces 3116408R1. (Item #: 104409, Ref: 3116408R1) $40.90
Tie Rod Tube - Used with straight axles only, this tie rod tube measures 16.190 inches long, 1 inch outside diameter. Used on 574, 2400A serial number 100000 and up, 2500A serial number 100000 and up, 385, 454 serial number 100000 and up, 484, 485, 584, 585, 674, 684, 784, 884. (Item #: 104408, Ref: 67529C1) $40.00

Wheels
Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $142.00
Front Wheel Hub, Heavy Duty - 6 bolt. For tractor models 268, 278, 3230, 4210, 4230, 4240, 574, 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, 995, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. (Item #: 124067, Ref: 67527C91) $143.00
Front Wheel Hub Seal - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 544, 560, 584, 585, 656, 666, 674, 684, 685, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 885, 886, 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 Replaces International OEM number 370254R1, , Compatible with John Deere Combine (s) 6600, Compatible with John Deere Harvester (s) 484, 5200, 5400, 5440, 5460, Replaces John Deere OEM number AH75484, (Item #: 123837) $9.30
Hub Cap - This Hub Cap is used with hubs: 67527C91, 406294R21, 406292R11, 536058R11. It is 2.5 inches in diameter. It replaces 612884R1, 47468696. (Item #: 115100, Ref: 612884R1) $5.10
Spindle Washer - For International / Farmall tractor models Hydro 70, Hydro 86, 385, 404, 424, 444, 454, 460, 484, 485, 504, 544, 584, 585, 606, 656, 664, 666, 674, 684, 686, 784, 884, 5088, 5288, 5488, Replaces International OEM number 369857R1, O.D.: 1.500", I.D.: .795", Thickness: .15", (Item #: 124771) $1.00
Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70
Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 424, 434, 444, 454, 464, 484, 574, 584, 606, 674, 684, 784, 884 and others using 12 inches x 28 inches 4 rail spin out rims. International Utility: 300, 330, 340, 350, 404, 460, 504 and others using 12 inches x 28 inches 4 rail spin out rims. Replaces: 365324R92. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $470.00
Wheel Bearing Kit - Complete for one wheel. For tractor models 574, 584, 585, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Hydro 84. Kit contains: LM102949 (Cone), LM102910 (Cup), L68149 (Cone), L68111 (Cup), 22322 (Lip Seal), 67328C1 (Retainer). (Item #: 100858, Ref: WBKIH9) $37.00
Wheel Bearing Kit - For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 495, 574, 584, 585, 595, 595XL, 674, 685, 685XL, 695, 695XL, 784. Kit contains: LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), 530104R91 (Seal), 406295R1 (Retainer-NOT SHOWN). (Item #: 100857, Ref: WBKIH6) $35.50
Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, and 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.00
Wheel Hub, Front - Used on IH models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 884, 885, 885XL, 895, 895XL, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C this Front Hub replaces OEM number 67527C92, 67527C91. Uses Wheel Bearing Kit WBKIH6 (Item #: 124067, Ref: 67527C92) $143.00
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.10
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.10
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.10
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.60
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.90
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.60

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00