FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall HV Tractor Parts

[Categories] [All Farmall Models] [Print]

Brakes

Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Item #: 116863, Ref: A30910) $7.70

Brake Band - Lined Brake Band (1). Fits (H and HV both to serial number 391357), I4, O4, OS4, W4. Brake rod unpins from lining. It is 2 inches wide. Replaces: 58344DCX. (Item #: 105416, Ref: 58344DCX) $42.95

Brake Pedal Return Spring - Used with band brakes. For tractor models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. 8-1/8 inch overall length. (Item #: 125749, Ref: 48599DA) $9.00

Brake Pedal Shaft - Brake Pedal Shaft measures 22 1/2 inches long and 1.13 inches diameter. For tractor models (H, HV serial number up to 391357 with brake band). (Item #: 115106, Ref: 50170DA) $58.00

Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.50

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Disc Brake Boot - For International / Farmall tractor models H, HV, OS4, Super C, Super H, Super HV, Super W4, 200, 230, 300, 330, 340, 350, Replaces International OEM number 355976R1, For Disc Brakes, (Item #: 112348) $6.50

Clutch

Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Item #: 100023, Ref: ST544) $5.40

No
Picture
Clutch Kit - For International / Farmall tractor models H, HV, Super H, Super W4, Replaces International OEM number 358555R1, 358556R92, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, Clutch Size: 10-1/2", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Additional Handling and Oversize Fees Apply To This Item, (Item #: 156479) $371.37

Clutch Kit - For tractor models H, HV to serial number 391357. This is a Rockford Style Clutch. 10 Inch Clutch kit containing- 1-10 Inch, 6 Spring Pressure Plate (52900D), 1-10 Inch Rigid Clutch Disc with 1 1/4 Inch 10 Spline hub (64772DA), 1-Release bearing (361292R91) and 1-Pilot Bearing (ST544). Includes alignment too (not shown). (Item #: 156478, Ref: 52900K) $220.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Item #: 126155, Ref: 49444DA) $19.00

Pressure Plate - 10.5 inch Rockford Style. Fits H serial number 391358>, HV serial number 391358>, Super H serial number 391358>. (Item #: 156473, Ref: 358555R92) $128.00

Pressure Plate - 10 inch Rockford Style. Fits Models: H, HV, Super H, Super W4, W4. (Item #: 156472, Ref: 52900D) $150.00

Pressure Plate, 9 Inch - Rockford Style Clutch Pressure Plate. Fits Models: H, HV, Super H, Super W4, W4. (Item #: 118719, Ref: 70228926) $93.00

Transmission Disc - This 10.5 inch Rockford Style Transmission Disco has a 10 spline, 1 1/4 inch diameter hub. Fits Models: H serial number 391358>, HV serial number 391358>, Super H serial number 391358>. (Item #: 156476, Ref: 358556R92) $195.37

Transmission Disc - 10 inch Rockford Style. 10 spline 1.25 inch. Fits Models: H, HV, Super H, Super W4, W4. (Item #: 130144, Ref: 64772DA) $93.00

Cooling System

Fan - This 6 blade fan measures 15 3/4 inch diameter, 1.437 inch pilot hole and mounting bolts circle is 2.625 inches. For tractor models H, HV. (Item #: 163837, Ref: A184904) $140.00

Header, Water Cover - Water jacket cover for Models: 300, 350, H, Super H, Super HV. Order 45266DA Gasket separately. (Item #: 110910, Ref: 48461DA) $29.98

Radiator - For tractor models H and Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM number 352628R92. (Item #: 101708, Ref: 352628R92) $400.00

$Farmall HV Radiator\Fuel Tank Hold Down Spring$
Radiator/Fuel Tank Hold Down Spring - This spring is used for the Radiator and for the Fuel Tank. Total 5 used per tractor, 2 for the radiator and 3 for the fuel tank. Spring measures 3/4 of an inch diameter and 1.15 inches long. For tractor models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Item #: 126686, Ref: 48826D) $7.00

Radiator Hose Kit - Radiator hose kit for tractors: H, 4, Super W4l 300 and 350 (not Farmall). Hoses- (1) 1-1/4 inch inside diameter x 2-1/4 inch length, (1)1-3/4 inch inside diameter x 3-1/2 inch length, (2) 1-1/2 inch inside diameter x 2-3/8 inches. (Item #: 178068, Ref: RHKH300) $11.60

Radiator Hose Kit - For International / Farmall tractor models H, HV, I4, O4, Super H, Super W4, W4, Quantity of 2: 1-1/2" I.D. x 2-1/2" Long x 1-7/8" O.D., Quantity of 1: 1-1/4" I.D. x 2-5/16" Long x 1-9/16" O.D., Quantity of 1: 1-3/4" I.D. x 3-1/2" Long x 2-1/8" O.D., For Hose Clamp use Item #: 130439, (Item #: 112336) $15.70

Radiator Pipe, Lower - Lower water pipe. For tractor models H, HV, I4, O4, OS4, Super H, Super W4, W4. Replaces 48828D, IHS684. (Item #: 150958, Ref: 353852R1) $40.00

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $38.50

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90

Water Pump Seal - This new seal fits the Case-IH Tractor H, HV, 300 Farmall, and 350 Farmall. Replaces Part Number 473421. (Item #: 173485, Ref: 51492DA) $5.70

Decals and Emblems

No
Picture
Decal Set - For HV. Complete Decal Set. (Item #: R1304) $27.56

No
Picture
Decal Set - For Super HV. Complete Decal Set. (Item #: 183378, Ref: R3473) $141.00

Hood Emblem - Hood Emblem measures 2 inches tall and and 12 inches long straight across the back (13 inches with the bend). For H, HV, M, MV, MD, MDV. Bright Metal Farmall logo. (Item #: 103908, Ref: 49404D) $19.20

International HV Decal Set, Farmall, McCormick, Mylar - For International / Farmall tractor model HV, Vinyl decal set use Item #: 100910, (Item #: 101039) $55.00

International McCormick Farmall Decal Set, HV, Vinyl - For International / Farmall tractor model HV, McCormick Farmall, Vinyl, Mylar decal set use Item #: 101039, (Item #: 100910) $105.00

Drive Train

Constant Mesh Gear - For tractor models H, HV, Super H, Super HV, W4. 55 Teeth. Replaces: 357459R2, 48418D, 48418DA (Item #: 172773, Ref: 357459R2) $235.00

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.00

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

Seal, Rear Axle - One 2-1/2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Item #: 151917, Ref: 377786R1) $15.50

Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $29.00

Transmission Drive Shaft - For tractor models H and HV to serial number 391357, 04, 0S4, W4. 18 and 35 teeth. Replaces: 47893D, 52945DA, 52945DC, 52945DE, 66192DA (Item #: 110922, Ref: 52945DE) $183.00

Electrical System

Alternator Brackets - For International / Farmall tractor models H (s/n 125250-later), HV (s/n 125250-later), I4 (s/n 5864-later), O4 (s/n 5864-later), OS4, Super H, Super W4, (Item #: 140516) $49.98

Battery Box Support Lock Bolt - For International / Farmall tractor models H (s/n 19233-earlier), HV (s/n 19233-earlier), I4, O4 (s/n 19233-earlier), OS4 (s/n 19233-earlier), Super H (s/n 19233-earlier), Super W4, W4, Replaces International OEM number 52898D, Length 1.220", (Item #: 126452) $6.50

Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $114.00

Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $114.00

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Item #: 104554, Ref: 1750411M91) $8.70

Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.10

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.90

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Item #: 103153, Ref: 1900119) $9.00

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $31.40

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Distributor Point Set - For J-4 Magneto and IH 353898R1 Distributor. Point Gap = 0.013 inches. Replaces 21A161, 407018R91, 353172R1, 353172R91. (Item #: 111109, Ref: 353172R1) $6.40

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.20

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on Some of the following, using Delco 1111411 vertical distributor with round insulating terminal: I4, I6, T6, A, AV, B, BN, C, H, HV, M, MV, O4, O6, Super C, Super H, Super M, Super MV, W4, W6 (Item #: 111459, Ref: 1878405ASSY) $15.00

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.40

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Distributor with base less tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $235.01

Distributor with Electronic Ignition - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Item #: 113311, Ref: 107304C91-6V) $655.78

Distributor with Electronic Ignition - 12V - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Item #: 113361, Ref: 107304C91-12V) $674.02

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $186.00

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Item #: 105071, Ref: 1142) $154.00

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $160.00

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Item #: 108148, Ref: 1142P12) $177.00

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Item #: 105072, Ref: 1142P6) $160.00

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $11.10

No
Picture
Generator - Delco Style (9718), Remanufactured, Delco Remy, 1100501 - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, I9, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, Compatible with International Combine (s) 101, 140, 151, Compatible with International Construction and industrial models T6, Compatible with International Baler (s) 37, 47, 57, Replaces Delco Remy manufacturer number 1100501, Replaces manufacturer number 9718, 340-21, 92-01-3050, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 25, Regulator: External, (Item #: 203178) $408.38

Generator Pulley - This 2 piece adjustable pulley is used on gas or LP; with generator #'s 1101355, 1101423, 1100501, 1100997. The pulley measures 4.129 inch Diameter. Made with ductile iron. Includes set screw and lock nut. Used on: H, M, I4, I6, I9, HV, MV, W6TA, W9, O4, WR9, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, W4, W6, WR9S, 300 (Farmall) up to SN 11002, 300 (Industrial) up to SN 2689, 400 (Farmall) up to SN 13458, 600, 650. Replaces 6745D, 6745DA, 6746D, 6746DA (Item #: 125677, Ref: 6745D) $52.80

H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $21.98

Ignition Tune-up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Item #: 103151, Ref: ATK1DCR) $9.80

Lighting Switch Dimmer Resistor - For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450, Replaces International OEM number 47889D, Will Not Fit 154, 184, 185, (Item #: 126566) $16.00

Magneto - This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Item #: 180178, Ref: XH1344) $558.00

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $29.50

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.00

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $9.00

Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Item #: 173506, Ref: 352079R1) $130.00

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.00

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.90

$Farmall HV Push\Pull Switch Knob$
Push/Pull Switch Knob - For International / Farmall tractor models A, B, C, Cub, H, HV, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, W4, W6, W9, Replaces International OEM number 8732D, Knob only replacement for push/pull switches, (Item #: 126614) $8.00

Rotor - Used with Delco distributors 1111411 with a clip held cap. For tractor models: A, I4, AV, Super A, Super AV, Super AV1, B, BN, C, Super C, H, HV, Super H, Super HV, M, Super M, MTA, Super MTA, MV, Super MV, O4, O6, OS4, OS6, T6, W4, W6, 354 (distributors with a tach drive). Replaces 3069778R1. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.10

Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $16.00

Starter, 6 Volt, 2 Bolt Mount - 2-bolt mounted starter for C163 gas engine on H (to serial number 19233), HV, for 248 gas on M (to serial number 28174), 152 Gas on OS4 (1940 to 1951), C248 Gas on O-6 (1940 to 1951), C264 gas on O-9 (1940 to 1951), C163 Gas on Super W-4 (1952 to 1954), C264 Gas on Super W-6/6TA (1946 to 1951), C335 Gas on Super W-9 (1946 to 1951), C163 Gas on I4 (1940 to 1951). Replaces 1107427, 997870R91, 1107448, 997870R91, 104219A2R. Can be used on a 12 volt system and recommend installing heavy duty starter drive part number 565549-NEW. (Item #: 109769, Ref: 1107448) $140.00

Starter, 6 Volt, 3 Bolt Mount - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. (Item #: 127035, Ref: 1108012) $213.00

Starter, 6 Volt, 3 Bolt Mount, Rebuilt - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. REBUILT Starter. 6 Volt. Replaces Delco 1108012. Replaces 357907R91, 4406, 140-050, 91-01-3979 Refundable $80 core charge. (Item #: 203213, Ref: 1108012-R) $353.24

Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

Starter - Delco Style (4132), Remanufactured, Delco Remy, 1107427, 104219A2 - For International / Farmall tractor models H (s/n 19233-earlier), HV, I4, M (s/n 28174-earlier), MTA, O4, O6, O9, OS4, OS6, Super H, Super W4, Super W6, Super W9, W4, Replaces International OEM number 104219A2, 997870R91, 104219A2R, Replaces Delco Remy manufacturer number 1107427, 1107448, Replaces manufacturer number 4132, 140-013, 91-01-3639, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For 6 Volt use Item #: 203150, Additional Handling and Oversize Fees Apply To This Item, (Item #: 210141) $334.01

No
Picture
Starter - Delco Style DD (4132), Remanufactured, Delco Remy, 1107427, 104219A2 - For International / Farmall tractor models H (s/n 19233-earlier), HV, I4, M (s/n 28174-earlier), MTA, O4, O6, O9, OS4, OS6, Super H, Super W4, Super W6, Super W9, W4, Replaces International OEM number 104219A2, 997870R91, 104219A2R, Replaces Delco Remy manufacturer number 1107427, 1107448, Replaces manufacturer number 4132, 140-013, 91-01-3639, Delco Style: Direct Drive, Voltage: 6, Rotation: Counter Clockwise, Teeth: 10, For a New version of this sku use Item #: 109769, (Item #: 203150) $353.37

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00

Starter Switch Actuator - This new foot starter switch actuator lever and bracket fits; H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV and Super MV where a foot activated starter switch mounts to the steering post. Replaces: Lever: 351922R11, Bracket: 351924R1 (Item #: 185010, Ref: IHS3263) $57.14

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.20

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50

Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $30.30

Tune-up Kit - This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Item #: 173738, Ref: MFITK10) $27.30

Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10

Wiring Harness - Wiring Harness, Headlights. For H, HV, M, MD, MDV, MTA, MV, Super M (Item #: 173035, Ref: 52973DA) $15.20

Wiring Harness - For H and HV with Regulator on generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. To Serial Number 340953. (Item #: 126812, Ref: R3720) $285.65

Wiring Harness - For H and HV with Regulator Under Fuel Tank. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. From SN 340954 and up. (Item #: 126813, Ref: R2604) $285.65

Wiring Harness Grommet - For International / Farmall tractor models A, B, C, H, HV, I4, I6, I9, M, MD, O4, O6, OS4, OS6, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, Replaces International OEM number 52062D, Mounts in amp box, Outer Diameter: 1.810", Inner Diameter: 1.246", (Item #: 126808) $5.40

No
Picture
Wiring Harness - Lighting - WIRE HARNESS - Headlights only for 200, 230, HV, MTA, Super H, Super M. 6 or 12 volt systems. (Item #: 179266, Ref: 358916R91) $34.05

No
Picture
Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models Super H, HV both (1953). (Item #: 173285, Ref: 358161R91) $58.21

Wiring Harness, Rear Light - For model H, HV. Rear light switch wiring harness. Restoration Quality. (Item #: 161894, Ref: 358311R91) $29.70

Wiring Harness, Regulator Cable - For tractor models H, HV, M, MV, Super M, Super MTA. (Item #: 162031, Ref: 354297R91) $17.62

No
Picture
Wiring Harness, Switch to Rear Light - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models Super H, HV both (1953). (Item #: 182746, Ref: 358991R91) $57.15

Engine Bearings

Cam Bearing Set - Camshaft bearing kit, 3 bearings. Induvidual bearings not available. For C152 CID 4 cylinder engine in tractors H and HV O4, OS4, W4. For 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Replaces: 45020D, 45020DB, 45021D, 45021DA, 45022D, 45022DA, 53419DB, 53420DA, 53421DA (Item #: 106661, Ref: CBK-H152) $42.70

Main Bearings - .010" Oversize - Set - For International / Farmall tractor models H (s/n 391357-earlier), HV (s/n 391357-earlier), I4 (s/n 33339-earlier), O4 (s/n 33339-earlier), OS4 (s/n 33339-earlier), W4 (s/n 33339-earlier), Compatible with International Engine (s) C152, Replaces International OEM number 377966R91, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106569, (Item #: 106567) $118.00

Main Bearings - .020" Oversize - Set - For International / Farmall tractor models H (s/n 391357-earlier), HV (s/n 391357-earlier), I4 (s/n 33339-earlier), O4 (s/n 33339-earlier), OS4 (s/n 33339-earlier), W4 (s/n 33339-earlier), Compatible with International Engine (s) C152, Replaces International OEM number 376702R91, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106569, (Item #: 106568) $138.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models H (s/n 391357-earlier), HV (s/n 391357-earlier), I4 (s/n 33339-earlier), O4 (s/n 33339-earlier), OS4 (s/n 33339-earlier), W4 (s/n 33339-earlier), Compatible with International Engine (s) C152, Replaces International OEM number 372128R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106568, (Item #: 106569) $173.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models H (s/n 391357-later), HV (s/n 391357-later), I4 (s/n 33339-later), O4 (s/n 33339-later), OS4 (s/n 33339-later), Super H, Super HV, Super W4, W4 (s/n 33339-later), 300, 350, Compatible with International Combine (s) 140, Compatible with International Engine (s) C152, C164, C169, C175, Replaces International OEM number 372121R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106572, (Item #: 106573) $148.00

Main Bearing Set - .010 inch. For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358 and up), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340). (Item #: 106571, Ref: MBK164-010) $93.00

Main Bearing Set - Main Bearing Set (standard). For H and HV to serial number 391357, and for 04, 0S4 and W4 to serial number 33339. Standard size replaces 2-43707DAX and 1-43708DAX. If other than standard specify size of (.010 or .020) in comments when ordering. (Item #: 184927, Ref: MBK152) $106.00

Main Bearing Set - Main Bearing Set (standard) H and HV - (both with serial number 391358 and up). Also C152 GAS on O4, OS4 and W4- (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Item #: 106570, Ref: MBK164) $119.00

No
Picture
Main Bearing Set -.010 - For H, HV (From S#391358), I-4, O-4, OS-4, W-4 (From S#33340) with C152 Gas Engine. (Item #: 106571, Ref: MS-302P-010) $93.00

Main Bearings - Standard - Set - For International / Farmall tractor models H (s/n 391357-earlier), HV (s/n 391357-earlier), I4 (s/n 33339-earlier), O4 (s/n 33339-earlier), OS4 (s/n 33339-earlier), W4 (s/n 33339-earlier), Compatible with International Engine (s) C152, Replaces International OEM number 367890R91, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106569, (Item #: 106565) $107.00

Pin Bushing Set - Connecting Rod Adapter Kit - 1.109 inch pin to .875 inch pin. Fits International H, HV, I4, O4, OS4, Super H, Super W4, W4, 300, 350. C152, C164, C169, C175 engines. (Item #: 158977, Ref: 366883R92) $95.00

Rod Bearing - Rod Bearing in STANDARD. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. Standard journal measures 2.297 inches. Replaces 357990R11, 7357990, and CRK164-STD. Sold individually (Item #: 106466) $19.50

No
Picture
Rod Bearing Set - .010 For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340 and up). (Item #: 183863, Ref: CRK164-010) $43.00

Rod Bearing Set - Rod Bearing. For H and HV to serial number 391357 and for 04, 0S4 and W4 to serial number 33339. Standard size replaces 43788DBX. Set of 4. (Item #: 184055, Ref: CRK152) $89.00

Engine Gaskets

Complete Gasket Set - Complete Overhaul Gasket Set with crankshaft seals. For H, HV, O4, OS4, W4, Super H, Super HV, Super W4 (Item #: 183823, Ref: GK7509S) $141.00

Crankshaft Seal Front - Fits, 152 CID, 164 CID, 169 CID, 175 CID 4 cylinder gas engines: Models, 300, 350, H serial number <106970, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, Super H, Super HV, Super W4, W4 serial number <33339, W4 serial number 33340>. Replaces: 286947R91, 358787R91, 297226R91, 338874R91, 358825R91, 288864R93, 358786R91, 360692R91, 51494DA, 53888D. (Item #: 106639, Ref: 360692R91) $9.70

Gasket Set, Upper - 152 CID 4 cylinder gas engines. For tractor models H serial number <106970, H serial number 106908 to 391357, H serial number 391358<, HV serial number <106970, HV serial number 106908 to 391357, HV serial number 391358<, O4 serial number <33339, O4 serial number 33340<, OS4 serial number <33339, OS4 serial number 391358<, W4 serial number <33339, W4 serial number 391358<. Replaces 354475R94 and 354475R1. (Item #: 106678, Ref: 354475R1) $106.00

Manifold Gasket Set - Manifold gasket set, contains two 1342802C1 gaskets. Used with manifolds 8033DCX and 352536R21. For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, W4 (Item #: 101549, Ref: MS8774B) $8.40

Oil Pan Gasket - OIL PAN GASKET For tractors with 152 CID Gas engines in models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Item #: 106699, Ref: 45267DA) $10.10

Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Item #: 152182, Ref: 71701C1) $5.10

Pushrod Side Cover Gasket - Used on H, HV, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350, this gasket measures 18-1/16 inches long and 4 inches wide. Replaces 45018DB (Item #: 167162) $23.20

Rear Crankshaft Seal Kit - Fits tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4 (with C152, C164, C175 gas or LP engines), 300, 350 (with C152, C164, C175 gas or LP engines), [International: 300, 350 (with C152, C164, C175 gas or LP engines); Replaces: 46959D, 46959DA, 379617R91, 45014D, 45013DA, 45012DA, 45012DB, 45013D, 25093DA (Item #: 106653, Ref: IHS2636) $24.00

Valve Seals - Valve Guide Seal - Positive Type (Item #: 183858, Ref: 386192R1) $3.10

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - Models: H and HV serial number to 391357, O4, OS4, W4 to serial number 391357. Basic overbore 3 3/8 inches to 3 7/16 inches Engine Kit, Less Bearings (C152 CID Gas 4-cylinder engine). For tractors with stepped head high compression pistons-valve length 5-5/16 inches. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130585, Ref: BEKH1156A-LCB) $620.00

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - For tractor models H and HV serial number 391358 and Up. Basic overbore 3 3/8 inches to 3 7/16 inches Engine Kit, Less Bearings (C152 CID Gas 4-cylinder engine). For tractors with stepped head high compression pistons-valve length 5-5/16 inches. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130943, Ref: BEKH1156E-LCB) $493.00

Basic In-Frame Engine Kit, C152 Gas, Stepped Head Pistons - In Frame Engine Kit. (C152 CID Gas 4-cylinder engine) Overbore 3 3/8 inches to 3 7/16 inches. For tractors with stepped head high compression pistons-valve length 5-5/16 inches. For tractor models H, HV, O4, OS4, W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 185042, Ref: BIFH1156A) $507.00

Valve overhaul Kit - Fits Super H, HV, Super W4 (4 cylinder gas valve length 5-5/16 inch). Kit includes valves, valve springs, valve keys, valve guides. (Item #: 131608, Ref: VOKH164B) $454.00

Valve Overhaul Kit - Fits Super H, HV, Super W4, (4 cylinder C164 cid). Kit includes valves, valve springs, valve keys, valve guides. (Item #: 185489, Ref: VOKH164A) $280.00

Valve Overhaul kit, C152 Distillate Engine - Fits H, HV, O4, OS4, W4 (4 cylinder C152 DISTILLATE engine). Kit includes valves, valve springs (for non- roto exhaust valve), valve keys, valve guides. Contains: 8- Valve Spring 24544DA, 16 - Valve Keeper 42026D, 8 - Valve Guide 6169DR, 4- Intake Valve 57696D, 4 - Exhaust Valve 57697D. These are 5.0625 inch valve length. (Item #: 187197, Ref: VOKH152A) $152.00

Valve Overhaul kit, C152 Gas Engine - Fits H, HV, serial number 106908 and up, Super H, HV, Super, W4, 300, 350, (4 cylinder gas C152, C164, C169, C175). Kit includes valves (5-15/32 inch length), valve springs (for non-roto exhaust valve), valve keys, valve guides. (Item #: 120310, Ref: VOKH152C) $250.01

Valve Overhaul Kit, C152 Gas Engine - Fits 4 cylinder C152 engine on : H, HV, to serial number 106907, O4, OS4, W4. Kit includes Valves (5-5/16 inch length), valve springs (for non-roto exhaust valve), valve keys, valve guides. (Item #: 187057, Ref: VOKH152B) $145.00

Engine Parts

Camshaft Timing Gear - 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Item #: 111368, Ref: 6664DB) $121.44

No
Picture
Connecting Rod Bolt Kit - For International / Farmall tractor models H, HV, I4, O4, OS4, Super H, W4, 300, 350, Compatible with International Combine (s) 140, Compatible with International Engine (s) C152, C164, C169, C175, Replaces International OEM number 63119DXA, Includes: Rod Bolt Washer, Rod Bolt and Connecting Rod Bolt Lock, (Item #: 169124) $101.00

Connecting Rod Bolt Lock Tab - .420 inch bolt hole diameter. For tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Item #: 167073, Ref: 47499DB) $7.30

Crankshaft Timing Gear - 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Item #: 121571, Ref: 43706D) $91.00

No
Picture
Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Item #: VSKH152C) $142.69

Cylinder Head Stud - 7/16 inch x 6 1/8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. 5 Used per engine. Replaces 48939DA (Item #: 178403, Ref: 48939DA) $17.40

Cylinder Head Stud - 7/16 inch diameter x 5-15/16 inches long. Fits H, HV, I4, O4, OS4, Super H, Super HV, Super W4, U164, U4, W4 Industrial: 300, 350, Farmall: 300, 350. 11 used per engine, gas and LP. Replaces: 45009D. (Item #: 178402, Ref: 45009D) $16.40

Engine Front Support, Used - For International tractor models H (s/n 96813-later), HV (s/n 96813-later), Super H, 300, 350, Replaces International OEM nos 9362D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431403) $33.01

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $10.80

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $51.00

Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $81.00

Valve Exhaust - Exhaust Valve, length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128741, Ref: 50707DA) $9.70

Valve, Exhaust - This exhaust valve is for tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.08 inch length, 1.38 inch head diameter. (Item #: 172940, Ref: 57697D) $26.00

Valve, Exhaust - For tractors with flat head standard compression pistons, valve length 5-15/32 inch. Models: H, HV, 300, 350. (Item #: 173837, Ref: 362535R1) $36.10

Valve Guide - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128745, Ref: 8049DR) $4.80

Valve, Intake - Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.05 inch length, 1.50 inch head diameter. 4 used per engine. Sold individually. (Item #: 172891, Ref: 57696D) $24.60

Valve, Intake - Intake Valve. GAS. Length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128740, Ref: 50706DA) $11.80

Valve, Intake - Intake Valve. For tractors with flat head standard compression pistons, valve length 5-15/32 inch. For tractor models H, HV, 300, 350. Price is for one valve. 4 used per engine. (Item #: 173835, Ref: 362534R1) $11.80

$Farmall HV Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

Valve Spring - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128734, Ref: 358197R1) $1.00

Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Item #: 128518, Ref: 24544DA) $3.30

Engine Pistons and Sleeves

Pin Bushing - Piston pin bushing, 4 used per engine. For C152 CID 4 cylinder engine in tractors H, HV, O4, OS4, W4. For H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Price shown is for each, sold only in multiples of 4 items. (Item #: 108037, Ref: 25998H) $11.40

$Farmall HV Piston Sleeve - 3 7\16 Overbore$
Piston Sleeve - 3 7/16 Overbore - Sleeve for H, HV, O4, OS4, W4. Verify bore size. Price is for each sleeve. 4 Required per engine. (Item #: 128634, Ref: SD22) $28.80

No
Picture
Piston, Stepped Head - Overbore 3-3/8 inch to 3/7/16 inch. Four ring piston fits 152 CID 4 cylinder gas engines: Models, H serial number <106970, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, OS4 serial number 33340>, W4 serial number <33339, W4 serial number 33340>. Uses PRS156 ring set. (Item #: 173228, Ref: PA321) $185.00

Sleeve and Piston Set - For H. Sleeves, (flat head) pistons and rings, pins and retainers. Overbore from 3-3/8 to 3-7/16 inch. Price is for one cylinder. Orde 4 for complete engine. (Item #: 190892, Ref: PK152) $122.00

Sleeve and Piston Set - For one cylinder. Used on OS4, H, HV, O4, W4, I4. All with C152 4 - cylinder gas engines. Sleeves, (stepped head) pistons and rings, pins and retainers. Overbore from 3-3/8 inch to 3-7/16 inch. Replaces 374312R93. YTO PK156 (Item #: 128650, Ref: PK156) $81.00

Engine Rings

Piston Rings - 3-7/16 inch overbore. Ring set for 1 pistons. Contains 3 compression 3/32 and oil ring 3/16. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. (Item #: 120913, Ref: PRS156) $44.80

No
Picture
Piston Rings - 3-3/8 inch bore. Includes 1/8 inch (1) COMP RING, 5/32 inch (2) COMP RINGS, and 1/4 inch (1) OIL RING. Complete set for 1 Cylinder. For C152 engine in models: H, HV, O4, OS4, W4. (Item #: 129053, Ref: 2C726) $35.30

Piston Ring Set - 3-7/16 inch overbore. Complete ring set for 4 pistons. For C152 CID DISTILLATE 4 cylinder engine. Contains 3 compression rings 3/32 and oil ring 3/16 per cylinder. For H and HV to serial number 391357, O4, OS4, W4 to serial number 33339. For H, HV, O4, OS4, W4. (Item #: 184780, Ref: PRS152) $169.00

Piston Ring Set - Ring set for 4 pistons, for C123 CID gas 4 cylinder engine. Overbore 3-1/8 inch to 3-1/4 inch. Contains (for each Piston): 3 compression rings at 3/32 and oil ring at 3/16 per cylinder. For tractors: Super A-1 AV-1 serial number 310300 and up. Super C~ 100 and for H, HV, O4, OS4, W4. Replaces 31R500, 2C4215, RP191451 (Item #: 185209, Ref: PRS159) $83.00

No
Picture
Piston Ring Set - 3-7/16 inch overbore. Complete ring set for 4 pistons. Contains 3 compression rings ( (2) 3/32 and (1) 1/8) and (1)1/4 oil ring for each cylinder. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. (Item #: 130063, Ref: 2C7790) $200.01

No
Picture
Piston Ring Set - Complete ring set for 4 pistons. Contains 3 compression 3/32 inch and 1 oil ring 1/4 inch per cylinder. Piston Ring Set 3-9/16 inch bore. Complete ring set for 4 pistons. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. For C169 300 Farmall and C175 2400B, 3400A. (Item #: 185631, Ref: 2C7547) $115.00

No
Picture
Piston Ring Set - overbore 3-7/16 inch ring set. 12 compression rings 3/32 inch, 4 oil rings 1/4 inch. For tractor models (H, HV up to serial number 391357), (I4, O4, OS4, W4 up to serial number 33339). (Item #: 130022, Ref: 2C5669) $141.00

No
Picture
Piston Ring Set - 3.4375" Overbore - 4 Cylinder Set - For International / Farmall tractor models H, HV, I4, O4, OS4, W4, Compatible with International Engine (s) C152 (gas), Overbore: 3.4375", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - 3.4375" Overbore-Single Cylinder use Item #: 120913, (Item #: 174399) $171.00

Piston Ring Set - 3.4375" Overbore - Single Cylinder - For International / Farmall tractor models H, HV, I4, O4, OS4, W4, Compatible with International Engine (s) C152 (gas), Overbore: 3.4375", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - 3.4375" Overbore - 4 Cylinder use Item #: 174399, (Item #: 120913) $44.80

Exhaust System

Exhaust Manifold Nut - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682987C1, Replaces Case IH OEM number 63460D, 43715D, (Item #: 168629) $2.10

Exhaust Manifold Stud - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682840C1, 63459D, (Item #: 168630) $5.37

Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $14.50

Muffler - Restoration Quality - For International / Farmall tractor models H, HV, I4, Super H, Super HV, Super W4, W4, 300, 350, Replaces International OEM number 350600R94, 350600R95, 51070D, High Temperature Paint, IH Logo and part number stamped into side, Inlet Length: 2-1/8", Inlet ID: 2-3/8", Shell Length: 12-1/4", Shell Diameter: 5-1/2", Outlet Length: 13', Outlet OD: 1-3/4", Overall Length: 27-3/8", (Item #: 164536) $67.00

Muffler, Vertical - For tractor models H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Vertical, 5 1/2 inch round, 2 3/8 inch inlet inside diameter, 2 1/2 inch outlet outside diameter, 29 inch overall length. (Item #: 100801, Ref: 350600R95) $46.00

Vertical Exhaust Muffler - This stainless steel muffler fits the following tractors models: H, HV, I4, Super H, Super HV, W4, and Super W4. It also replaces the OEM part numbers: 355869R1 and 350600R95. The inlet length is 1 7/8 inches and the inlet inside diameter is 2 3/8 inches. The shell length is 10 1/4 inches and the shell diameter is 5 1/2 inches. The outlet length is 13 1/4 inches and the outlet outside diameter is 1 3/4 inches. The overall length is 27 7/8 inches. Polished Stainless Steel (can discolor from extreme heat). If the stainless steel tarnishes, it will buff out with a metal cream such as Blue Magic. (Item #: 164537, Ref: 51070D) $172.00

Fuel System / Air Intake

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. For clamp style air cleaners, not clip style. For IH gas applications H, I4, HV, O4, OS4, Super H, Super HV, W4, 300, 340, 350, 404, 424, 504. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.60

Air Cleaner Pipe - This Air Cleaner Pipe fits: H, HV, I4, W4. It has a 1-3/4 inch outside diameter and is 12-3/4 inches overall length. It replaces 51437D. (Item #: 126384, Ref: 51437D) $30.00

Carburetor Float - For updraft International carburetors 45108DB, 45108DC, 45108DD, 50981DA, 50981DB, 50981DC, 50981DD. For tractor models H, HV, O4, OS4, W4. Replaces 45114D, 45114DD, 45114DC, 45114DB, IHS203. (Item #: 108456, Ref: 45114DX) $19.30

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to 5/16 inch flare. (Item #: 111514, Ref: 29902DX) $16.20

Carburetor Kit, Basic - Basic Carburetor Kit for carburetors 45108DB and 50981DA on models H, HV, W4. (Item #: 100729, Ref: IH102) $25.30

Carburetor Kit, Basic - For tractor models H, HV and W4 (Distl.) with OEM# 45108DB and 50981DA. Contains the following parts with instructions. Includes: gaskets, seats, and springs. (Item #: 100729, Ref: BK10V) $25.30

Carburetor Kit, Comprehensive - For tractor models H, HV and 4 (Distl.) with OEM# 45108DB. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 112362, Ref: C510V) $28.10

Carburetor Kit, Comprehensive - For H, HV and W4 with International 50981DA, 50981DC. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 112362, Ref: C510HV) $28.10

Carburetor Load Metering Nozzle - For International / Farmall tractor models H, HV, Replaces International OEM number 56610DX, For International Carburetors 50981D, 50981DA, (Item #: 111350) $4.98

Carburetor, New OEM - This is a "Like Original" reproduction carburetor fits: H, HV, I4, O4, OS4, U4, W4. Replaces: 50981DA, 50981DB, 50981DC, 50981DD, 45108DB, 45108DC, 45108DE, 50981D, 6212DB, 6213DB. This carburetor is tagged as 50981DR and uses original replacement parts for the 50981DC. (Item #: 149819, Ref: 50981DC) $313.00

Carburetor Venturi - For carburetors: 45108D, 45108DA, 45108DB, 45108DC, 45108DD or 50981D, 50981DA, 50981DB, 50981DC, 50981DD. Zinc, like the original. (Item #: 182763, Ref: 64986D) $38.00

Comprehensive Carburetor Kit - For tractor models H, HV and W4. Use with International carburetor number 45108D, 45108DB, 45108DC, 45108DD, 45108DE, 50981D, 50981DA, 50981DB, 50981DC, 50981DD, Casting number: 6212DB, 6213DB (Item #: 182491, Ref: R7523) $78.00

Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 116503, Ref: 40756D) $4.98

Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Item #: 121475, Ref: 12770D) $12.40

Fuel Line, From Tank - For tractor models H and HV serial number 50866 and up. Fuel line, metal pipe from fuel tank to strainer with two nuts. Restoration quality. This fuel line is for distillate or kerosene tractors (tractors with two tanks). (Item #: 172772, Ref: 58367DAX) $41.50

Fuel Line, To Carburetor - For tractor models H and HV serial number 50866 and up. Fuel line, metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. (Item #: 168062, Ref: 58366DX) $40.40

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47

Fuel Sediment Bowl Assembly - For International / Farmall tractor models F12, F20 (s/n 93064-earlier), F30 (s/n 25889-earlier), H (s/n 50865-earlier), HV (s/n 50865-earlier), M (s/n 24214-earlier), O4 (s/n 1129-eaerlier), O6 (s/n 1316-earlier), Regular (s/n 87182-later), W4 (s/n 1129-eaerlier), W6 (s/n 1316-earlier), W30 (s/n 28534-earlier), W40, Replaces International OEM number 13120D, 13120DA, 13120DB, 17237D, 17237DA, 1/4" NPT Pipe inlet, For 1/4" NPT fitting for a 5/16" line, (Item #: 167070) $81.00

Governor Control Sector - Governor control sector with pivot pin for tractors: H and HV, Super H and Super HV, M and MV, Super M and Super MV. (Item #: 114409, Ref: 51351DBXA) $74.00

No
Picture
Governor Spring - For International / Farmall tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350, (Item #: 167074) $13.80

$Farmall HV Lift All Control Rod Spring\ Flat Hold Down Spring$
Lift All Control Rod Spring/ Flat Hold Down Spring - For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super M, Super MTA, Replaces International OEM number 15137E, (Item #: 126555) $16.90

Nut - Repair Keyway Throttle Stop Bolt - For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super M, Replaces International OEM number 86509309, For square tooth throttle assembly / governor control handle, (Item #: 111049) $0.80

Precleaner Assembly - Complete, glass dust bowl assembly, 2 inch inside diameter base, just like the original. For tractor models H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350. (Item #: 112511, Ref: 59095D) $73.00

Precleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Item #: 111710, Ref: 54082D) $6.60

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Item #: 113653, Ref: 17215DA) $70.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.50

Throttle Dog - This Throttle Dog is used with square tooth throttle assembly/ governor control handle. Replaces 361245R1 (Item #: 110950, Ref: 361245R1) $7.20

$Farmall HV Throttle \ Governor Control Spring$
Throttle / Governor Control Spring - This Throttle Lever Spring Fits: H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MV. Measures 1.322 inch overall length, 0.925 Inch Outside Diameter. This is used one stamped steel throttle lever assemblies, not cast iron ones. Replaces: 51349D (Item #: 179413, Ref: 51349D) $6.70

Throttle Plate Assembly - This is a Square Tooth Throttle Control Assembly (Governor Control Assembly) used on H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA. Replaces: Handle: 361244R11, Sector: 361246R11, Assembly: 366727R91 (Item #: 114409, Ref: 366727R91) $74.00

Throttle Plate Assembly - H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA; Replaces: Saw tooth Lever: 51348DAX, Saw tooth sector: 51351DBX, 51351DBXA (Item #: 114409, Ref: 51351DBX) $74.00

Gauges

Amp gauge - Gauge, ammeter has 20-0-20 range. Not Exactly like original. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Item #: 102133, Ref: 354473R91) $20.70

Amp Gauge, Original Style - Gauge, ammeter has 20-0-20 range. Original Style. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418, 354473R91 (Item #: 121652, Ref: 354473R91OE) $29.74

Fuel Gauge Cap - This vented fuel cap has a built in gauge. Overall length is 13 inches. Uses gasket part number 23977DA - sold separately. For models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 160452, Ref: 365498R91) $110.00

No
Picture
Fuel Gauge Cap Gasket - Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Item #: 110635, Ref: 43984D) $2.70

Hitch / Drawbar

Swinging Drawbar Roller Shaft Support - For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA, Replaces International OEM number 356653R91, (Item #: 126738) $63.00

Hydraulic System

Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Item #: 126480, Ref: 15158EX) $30.30

Hydraulic Pump Control Rod - Hydraulic Pump Control Rod is 38 inches long with a 3/8 inch diameter. It is used on the following tractors using belly mounted hydraulic pump: H, HV (Super H, Super HV both up to serial number 19233). This part replaces original part number 15091EX. (Item #: 179705, Ref: 15091EX) $44.50

Hydraulic Pump Seal, O-Ring and Gasket Set - Hydraulic Pump Seal, O-Ring and Gasket Set Fits: (I4, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 all when converted Thompson live hydraulic pump), (300, 350 both when using Thompson live hydraulic pump; gas, LP or diesel), Fits pump #'s 363779R91, 363779R92, 363779R93, 363779R94, 366823R91, 366823R92, 366823R93 (the pump number is stamped into the aluminum upper pump housing). Contains 1 gasket 352439R1, 352439R2, 1 gasket 366783R1, 366783R2, 1 oil seal 356887R91, 124633R91, 2 oil seals 363781R91, 6 o-rings 355965R1, 511029, 1 o-ring 259246R1, 87016953, 2 o-rings 257611R1, 70925639, 2 back-up washers 369870R1, 1 5/8 inch - 18 NF jam nut 114498 and 86637932. Replaces: 363783R93, 363783R94 (Item #: 178899, Ref: 363783R93) $91.00

Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $2.98

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.70

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 112980, Ref: 53525DA) $17.20

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125672, Ref: R5362) $46.70

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107984, Ref: R5364) $32.98

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178354, Ref: R5366) $61.00

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107095, Ref: R5368) $40.70

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178387, Ref: R5361) $61.00

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125715, Ref: R5363) $49.40

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178351, Ref: R5365) $29.98

No
Picture
Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107094, Ref: R5367) $27.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Item #: 179711, Ref: 57313D) $11.10

Rear Combo Light Assembly -6Volt - Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 105335, Ref: 355914R91-6V) $73.00

No
Picture
Rotary Light Switch. Early - This 4 position, 6 volt light switch is for models with CUT OUT RELAY, not a voltage regulator. Cut our telays have 2 terminals on one side and 1 terminal on the other. Voltage regulators have 3 terminals on 1 side and 1 terminal on the other. OFF is a position (of the 4). For models A, AV, B, H, M, MV, O4, O6, OS4, OS6, W4, W6, WR9, C, Cub, HV, W9, WD6, WD9. Replaces 57310DX, 57310DY and 1994019. (Item #: 126644, Ref: 47890DX) $135.00

Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $40.00

Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Item #: 111330, Ref: GC200) $15.30

Oil System

Oil Filler Cap - This Oil Fill Cap does not come with hardware or gasket. We do not have those parts available. For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Item #: 126605, Ref: 4819DX) $15.00

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, Element is 3 7/16 inches in diameter and 7 1/2 inch overall length. Replaces: 355010R91, 360431R91, 376375R91, 63858D (Item #: 111121, Ref: 376375R91) $21.00

Oil Filter - Oil filter element, cartridge type. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Item #: 111120, Ref: 376374R91) $14.20

Oil Filter, Spin-On - For tractors that have been converted from cartridge type to spin on oil filters. (Item #: 118399, Ref: E7NN6714AA) $14.20

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Oil Level Petcock - This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. McCormick Deering: 10-20, 15-30, 22-36. 3/8" pipe thread. Two used per tractor, sold individually. Replaces 1998TA, OGC200 (Item #: 126590, Ref: 1998TA) $16.90

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Spin On Oil Filter Adapter Kit - This Spin On Oil Filter Adapter Kit Fits all Gas and LP, IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Industrials: (I4, I6 Serial Number 4253 and up). Tractors: 300, 350, 400, 450, (A without hydraulics), B, BN, H, HV, (M, MV Serial Number 595394 and up), MTA, O4, (O6, W6 Serial Number 4253 and up), OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, (T6, U6 Serial Number 5455 and up) ], (T6-61, U164, U4, UC248 Serial number 2327 and up), W4, W400, W450; For Replacement filter, order E7NN6714AA. Replaces: 538829R91 (Item #: 166373, Ref: 538829R91KIT) $123.00

PTO / Driveline

PTO Bearing - This bearing measures 1.575 inches (40.005 mm) inside diameter, 3.150 inches (80.010 mm) outside diameter, and 0.709 inches (18.008 mm) wide. It replaces D83012, B18215, DANA070HD100, H437897, H4628S, H4625S, H4626S, H4627S, K3660223431, L33908, SBA326040030, P39642, ST215, 0000140211, 0040040, 1103566C91, 114085, 130029H1, 151901206, 190001311024, 190003311024, 190003313025, 192310210025, 1963034C1, 199012290707, 20915780, 2359180, 2521A415, 294714R91, 301164, 3146251R91, 325046C91, 339818X1, 340401140, 41618500, 47109308, 47110555, 47123219, S69425, 6208, 700524R91, 700526R91, 70066742, 700803429, 704772R91, 704772R92, 707805203, 713564R91, 80114085, 80301164, 81878507, 83962320, 87605894, 920096050, 9964942 (Item #: 111675, Ref: ST215) $32.98

PTO Safety Shield - For H after serial number 118000, HV, Super H, Super HV. PTO Safety Shield. (Item #: 113259, Ref: 66387DAXA) $70.00

No
Picture
PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Item #: 103975, Ref: 51484DX) $18.70

Seats

Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 110069, Ref: R0906) $212.00

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover measures 22 inches wide and 19 inches long. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101244, Ref: 357518R91) $160.00

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Item #: 101245, Ref: R0903) $213.00

No
Picture
Seat Custom with Fold Up Arms - Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Item #: 101387, Ref: CS108-1V) $116.00

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H and HV, Super H and HV~ M and MD, Super M and MTA~ Super W6 and W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Item #: 179249, Ref: 356892R2) $12.00

Seat Pan - Steel Black vinyl without drain hole Fits tractor models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S (Item #: 191059, Ref: 357518R92-1) $205.00

No
Picture
Seat Pan - Steel Silver vinyl Fits Models, 100, 140, 200, 230, 240, 300, 340, 350, 460 DSL, 600, 650, A, AV, B, C, H, HV, M, MD, MDV, MTD, MV, Super H, Super M, W9, WD9, WDR9, WR9S. (Item #: 101246, Ref: 357518R92-18) $148.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Shocks - Rear Mount - For H and HV with serial number 15698 to 281555; M, MD, MDV, Super MD and Super MDV with serial number 9287 to 165270. Rear Mount Seat Shocks are 11 1/2 inch center to center compressed length. Replaces IHS329. (Item #: 105339, Ref: 352587R92) $29.98

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Item #: 101283, Ref: 354670R2) $26.90

Seat Support Pivot Rod - Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Item #: 105344, Ref: 352648R1) $22.30

Sheet Metal / Body Parts

Battery Box - For H, Super H, HV, W4. Battery Box with Cover. Replaces OEM# 51686DBX. Outside dimensions: 9 3/8 inches in length, 7 11/16 inches wide, 9 inches tall. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112491, Ref: 51680DB) $98.00

Battery Box Lid - For H, Super H, HV, W4. Battery Box Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104012, Ref: 51686DBX) $52.00

Battery Hold Down Rubber - The battery hold down rubber is3/4 inches tall, inserts into the retainers in the battery box lid. These are sold EACH. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Item #: 116587, Ref: R5103) $4.60

Fender Extension Mounting Kit - One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. Replaces IHS364. (Item #: 103989, Ref: 8000072) $90.00

No
Picture
Grille Screen - For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, Size: 2' x 3' with 5 squares per inch, Wire Grille Screen Clips use Item #: 108001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112471) $17.98

Grill Screen Insert - This complete grill and screen for tractor models H, Super H, HV, Super HV. (Item #: 103939, Ref: 48963DXA) $44.40

Steering

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $12.10

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

Spindle-LH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104340, Ref: 360419R91) $141.98

Spindle-RH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104330, Ref: 360420R91) $232.00

Stay Rod Assembly, Used - For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. Overall length 43 inches, 3/4 inch shaft, threaded end 3/4 inch UNF. (Item #: 126730, Ref: 50047DB) $148.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10

Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Item #: 128568, Ref: 50038DB) $98.00

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Item #: 178091, Ref: ST225B) $9.30

Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Item #: 122678, Ref: 43800D) $5.50

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Wheels

No
Picture
Bearing Cone - Outer cone for bearing kit FW112FS. For tractor models HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Item #: ST771A) $69.39

No
Picture
Bearing Cone - Inner cone for bearing kit FW112FS. For tractors HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Item #: 172820, Ref: ST781A) $38.00

No
Picture
Bearing Cup - Inner cup for bearing kit FW112FS. For tractors HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Item #: 179997, Ref: ST882) $14.70

Front Wheel Bearing Kit - Kit contains one each: 342S (cone), 332 (cup), 2878 (cone), 2820 (cup), 48704DA (seal), 15288A (felt seal). Repairs one wheel. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Item #: 126828, Ref: FW112FS) $178.00

$Farmall HV Front Wheel \ Rim Clamp$
Front Wheel / Rim Clamp - Used on many Farmall / IH tractors, this clamp 1.485 inch over all length with a 0.540 inch hole. Three or more used per wheel. Sold individually. Replaces 48976DA (Item #: 152052, Ref: 48976DA) $13.00

Oil Seal - Oil seal for bearing kit FW112FS. For tractor models HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. 358779R91, 358818R91, 367161R91, 372475R91, 48704D, 48704DA, 704108R91, 708108R91 (Item #: 123838, Ref: 48704DA) $29.00

Rear Wheel Clamp - This rear wheel clamp is for 2 1/2 inch diameter axles. NOT FOR STEEL WHEEL OR CUT DOWN WHEEL APPLICATIONS. Fits cast wheel center part number 6194D. It is for tractor models H, HV, Super H, Super HV, 300 early, for all 6194D rear wheel. (Item #: 111698, Ref: 6192DBX) $80.00

Rear Wheel Rim Clamp Bolt - For International / Farmall tractor models H, HV, M, MD, MTA, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W9, W4, W6, W9, WD9, 300, 400 (s/n 5180-earlier), Replaces International OEM number 48985DA, 13491R1, 4.25" x 5/8" NC, Square head 1", Grade 5, Single Dot Square Head, (Item #: 126624) $13.60

Rim Clamp, Used - For International tractor models H, HV, M, MD, Super H, Super HV, Super M, Super MTA, 300, 350, 400, 450, 560, 660, Replaces International OEM nos 48984D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496585) $5.01

Wheel Bearing Kit, Wide Axle Assembly - For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A (Cone), 14274 (Cup), 1779 (Cone), 43828D (Gasket), 704083R1 (Seal), 48548D (Seal Retainer), 1729 (Cup). Inner bearing inside diameter is 1.37 inch, outside diameter 2.71 inch. Outer bearing inside diameter is 0.93 inch, outside diameter 2.23 inch, seal inside diameter is 1.74 inch, outside diameter 2.83 inch. (Item #: 100853, Ref: WBKIH4) $39.20

Wheel Center, Used - For International tractor models H, HV, Super H, 300 (s/n 501-3726), 350, Replaces International OEM nos 6194DD, Cast, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432946) $263.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall HV Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall HV Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall HV Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall HV Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall HV Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall HV Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall HV Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall HV Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00