FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 1520 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

No
Picture
Brake Disc - This 16 Spline Brake Disc replaces OEM part numbers 81878142, SBA328110150, 83965913. For tractor models TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, T1510, T1520, T2210, T2220, 1320, 1520, 1530, 1620, 1630 (Item #: 160126, Ref: SBA328110151) $71.00

No
Picture
Brake Stator Plate - 4.624 inch inside diameter. Replaces 83965912. For tractor models TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, T1510, T1520, T2210, T2220, 1320, 1520, 1530, 1620, 1630. (Item #: 160125, Ref: SBA328560190) $23.00

Clutch

Clutch Alignment Tool - 15/16 inch 10 spline, 1-3/8 inch 19 spline, .468 inch pilot. For tractor models 1000, 1500, 1600, 1700, 1900, 1310, 1510, 1710, 1320, 1520, 1620, 1925, 1530, 1630. (Item #: 116906, Ref: AG01) $21.40

Clutch Disc - Dual clutch, 8-1/2 inch, 15/16 inch, 10 spline, rigid woven disc. For tractor models 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, TC27D, 23-66. (Item #: 174161, Ref: SBA320400492) $150.01

Clutch Disc - This Clutch Disc is 8 3/8 diameter, 10 spline on a 15/16 inch hub. For Ford 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900. (Item #: 116084, Ref: SBA320400212) $73.00

Clutch Kit - This new heavy duty single stage clutch kit contains a new 8 1/2 inch single pressure plate assembly (SBA320450011), a new 8 1/2 inch 10 spline, 24 mm (0.944882 inch) hub, woven clutch disc (83986703), new release bearing, 2.88 inches outside diameter x 1.77 inches inside diameter x .31 inch wide (SBA398560120), new pilot bearing, 1.10 inches outside diameter x .472 inch inside diameter X .31 inch wide (SBA040116001), and clutch alignment tool. For tractor models 23-66, 1000, 1310, 1320, 1500, 1510, 1520, SBA040116001 1530, 1620, 1630, 1700, 1710, 1715, 1900. (Item #: 117306, Ref: SBA320450011K) $160.00

Clutch Kit, Double - This Double Clutch Kit contains SBA320040694 pressure plate 8.50 inch diameter double clutch with 19 tooth 1 3/8 inch center hub, 83986703 drive disc, 8 1/2 inch diameter by 10 spline with 15/16 inch center hub, fiber material, SBA398560340 release bearing outside diameter 3.47 inch by inside diameter 2.16 inch by width of .766 inch, SBA040116001 pilot bearing 1.10 inch OD by .472 inch ID by .472 inch width, and pilot tool, .468 inch pilot, 10 spline, for 15/16 inch hub drive disc, 19 spline 1 3/8 inch on hub for PTO disc. (Item #: 118647, Ref: SBA320040694K) $1269.01

Pilot Bearing - Inside diameter .475 inch, outside diameter 1.102 inch, thickness .313 inch. For Shibaura compact Tractors: 1000, 1210, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 1925 HST, 2110, 2120, TC27D, TC30D, 23-66, 28-66. (Item #: 107883, Ref: SBA040116001) $6.70

Pressure Plate - 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1600, 1620, 1630, 1700, 1710, 1715, 1900 (Item #: 130141, Ref: SBA320450011) $128.00

PTO Disc - This PTO Disc is used as the captive disc inside the Pressure Plate Assembly. It is 8.480 inches in diameter, 19 count spline, 1.3125 inch spline diameter. Replaces SBA320400262, SBA320400261, SBA320400260, SBA320400290, 83938759, 83986709, 87761138 (Item #: 130111, Ref: SBA320400260) $120.00

Release Bearing - This Release Bearing measures 2.165 inches inside diameter, 3.448 inches outside diameter, .7696 inches width. Clutch release bearing. FITS 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, 1720, 1900, 1910, 1920, 1920, 2110....ALL WITH DOUBLE CLUTCH. Replaces 83922741. Verify measurements. (Item #: 108119, Ref: SBA398560340) $41.50

Release Bearing - Release bearing (single clutch), inside diameter 1.771 inch, outside diameter 2.900 inch, thickness .700 inch. For tractor models 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900, 2120, 23-66. (Item #: 108054, Ref: SBA398560120) $32.80

Cooling System

No
Picture
Fan, 5 Blade - 13 inch diameter, 15/16 inch pilot hole, 1-1/8 inch center to center on mounting holes. For tractor models: 1120, 1215, 1220, 1320, 1520, 1720, (1920 from 1987 to 1998). (Item #: 150059, Ref: SBA145306491) $11.98

No
Picture
Fan Belt - Measures 1/2 x 38.2 inches. For tractor models 1320, 1520, 1715, 1720, 1920, 3415 all built 1987 and later. (Item #: 164842, Ref: 86517954) $15.50

No
Picture
Radiator - For Ford tractor models 1320, 1520, 1620 Replaces Ford OEM number SBA310100620, , Compatible with New Holland tractor models T1510, T1520, TC30, Replaces New Holland OEM number SBA310101170, Overall Height: 20-1/4", Overall Width: 17-1/4", Core Height: 15-11/16", Core Width: 16-1/2", Depth: 1-7/8", Rows: 3, Serpentine Fins, Fill Neck Height: 3/4", Inlet: 1-1/4", Outlet: 1-1/4", For 2 row use Item #: 119658, Additional Handling and Oversize Fees Apply To This Item, (Item #: 107806) $492.00

Radiator Cap - Used as a primary radiator cap for many Japanese built compact tractors, this 13 psi cap is also used for radiator overflow reservoir systems in some larger ag tractors. Fits 3/4 inch deep neck. Verify OEM numbers before ordering. Replaces 157017-2030, 2097708, 3280783M1, 3280783M1GV, A171919, A171919GV, ESL10493GV, TPCH18207GV, TP-CH18207GV, 2097708GV, 1570172030GV, 157017-2030GV, E5TH8100AA, E5TH8100AAGV, CH18207, ESL10493, SBA145546060, 87749607. Sub for CH10427 (Item #: 124400, Ref: CH18207) $9.00

No
Picture
Radiator Hose, Lower - This lower hose has an inside diameter of 1.25 inches. For models 1320, 1520, 1620, 1715. Verify measurement. (Item #: 115064, Ref: SBA310161091) $8.40

Radiator Hose, Upper - 1.50 inch inside diameter. For models: 1520, 2020, 2030, 300B, 301A, 302, 302A, 401B, 401C, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B. All with gas engines. (Item #: 128435, Ref: T22496) $10.80

Radiator Hose, Upper - 1.312 inch inside diameter. For tractor models TC30, 1320, 1520, 1620, 1715, 1720. (Item #: 115063, Ref: SBA310160932) $15.50

Water Pump - For tractor models 1320, 1520, 1620, 1715. (Item #: 113453, Ref: SBA145016780) $99.00

Water Pump By-Pass Hose - This Water Pump By-Pass Hose has a 0.540 inch inside diameter. It us used on numerous Ford / New Holland Compact Tractors. It replaces part numbers 87780789, 87772767, 83938274, SBA145537020, SBA145536050, SBA145536380, 83966732 (Item #: 107807, Ref: SBA145536051) $6.60

Water Pump, Remanufactured, SBA145016780 - For Ford tractor models 1320, 1520, 1620, 1715, Replaces Ford OEM number SBA145016780, FB5016780, Includes pump to backplate gasket, Includes backplate to block gasket, With hub, For a New version of this sku use Item #: 150366, (Item #: 206271) $113.01

Electrical System

Alternator - 12 volt, 40 amp. For tractor models 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1920, 1925, (2120 1987-2002), 3415, L465, L554, L565, LS140, LS150, LS170, (LX465, LX485, LX565, LX665 1994-1999 with 843 or 844 New Holland engine), TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC33, TC33D, TC33DA, TC35, TC35D, TC35DA, TC40, TC40D, TC40DA, TC45, TC45D, TC45DA. Replaces SBA185046201, SBA185046200. (Item #: 111071, Ref: SBA185046320) $161.00

Alternator Adjuster Bracket - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 6mm Thick, (1) 10.7mm Unthreaded Hole, (1) 8.5mm x 92mm Slot, 230mm OAL, (Item #: 164215) $13.50

No
Picture
Alternator Conversion Wiring Harness - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Number of Wires: 7, Additional Handling and Oversize Fees Apply To This Item, (Item #: 164235) $16.98

Alternator Mounting Bracket, NAA10302 - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 9.5mm Thick, (2) 13mm Unthreaded Holes, (2) 10mm Unthreaded Holes, (Item #: 164214) $20.10

Ignition Switch, SBA385201900, 87760273 - For Ford tractor models 1120, 1215, 1220, 1320, 1520, 1620, 1715, 1720, 1920, 2120, 3415 Replaces Ford OEM number SBA385201900, , Compatible with New Holland tractor models 1320, 1520, 1620, 1715, 1720, 1920, Replaces New Holland OEM number SBA385201900, 87760273, (Item #: 169985) $51.00

Starter - This starter with solenoid is 12 volt, 9 tooth, 1.70KW for models 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1925, TC27D. Replaces SBA185086191, SBA185086290, SBA185086291, SBA185086500, SBA185086550, SBA185086551 (Item #: 111075, Ref: SBA185086551) $86.00

Starter - For tractor models 1320, 1520, 1530, 1620, 1710, 1715, 1720, 1725, 1925, T1520, TC27. 11 tooth drive like original equipment. Replaces SBA185086291, SBA185086551, SBA185086550, SBA185086500, 83942688, 301457A1, 87761106, 81867523, IS1101 (Item #: 185712, Ref: SBA185086291) $221.00

Engine Bearings

Crankshaft Bushing, Front - .010 - Used on Shibaura engines 104-22, 404C-22, 404C-22T, N844L-C, N844LT-C, 403C-15, N843-C. This is a 0.25mm (.010 inch) oversize Front Crankshaft Bushing. Replaces 1603503, 198517226, 3024181, 302-4181, SBA198517224, 198517224, SBA198517226, SBA198517226, SBA198517224, SBA198517226, SBA198517226, 198517225, 160-3503. (Item #: 124121) $8.25

Crankshaft Bushing, Front - .020 - Used on Shibaura engines 104-22, 404C-22, 404C-22T, N844L-C, N844LT-C, 403C-15, N843-C. This is a 0.50mm (.020 inch) oversize Front Crankshaft Bushing. Replaces SBA198517229, SBA198517229, 198517229, 302-4182, 160-3504, 198517228, 1603504, SBA198517227, SBA198517229, 198517227, 3024182. (Item #: 124122) $14.30

Crankshaft Bushing, Front - Standard - Used on Shibaura engines 104-22, 404C-22, 404C-22T, N844L-C, N844LT-C, 403C-15, N843-C. This is a Standard Front Crankshaft Bushing. Replaces 198517221, 198517220, 198517550, 198517222, SBA198517222, 198517222, 294-4916, SBA198517222, SBA197517220, 2944916, SBA198517220, 154-0180. (Item #: 124120) $10.30

Safety Switch, Seat - Seat safety switch for rear PTO. Round Push Button with 2 Wire Plug. Used on Ford Compacts 1320, 1520, 1620, 1715, 1630, 1725, 1925. Also used on New Holland models: oomer 2030, Boomer 2035, Boomer 4055, Boomer 4060, T2210, T2220, T2410, T2420, TC18, TC21, TC21D, TC21DA, TC23DA, TC24D, TC24DA, TC25, TC25D, TC26DA, TC29, TC29D, TC30, TC31DA, TC33, TC33D, TC34DA, TC48DA, TC55DA (Item #: 168012, Ref: SBA385201260) $19.50

Engine Parts

No
Picture
Crankshaft, Remanufactured, SBA115256590 - For Ford tractor models 1320, 1520, 1620, 1715, Compatible with Ford Lawn and Garden (s) CM272, CM274, Compatible with New Holland tractor models TC25, TC25D, TC29, TC29D, 1530, 1620, 1630, 1715, 1725, Compatible with New Holland Lawn and Garden (s) CM272, CM274, Replaces OEM number SBA115256590, Replaces Casting number N850, Casting Number (s): N850, For a New version of this sku use Item #: 159056, (Item #: 204752) $870.01

Fuel System / Air Intake

Fuel Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3415, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9700 Replaces Ford OEM number C5NN9030A, E7NN9030AA, , Compatible with New Holland tractor models TC30, Replaces OEM number 81811847, 83900753, 83904042, 83929889, 83947669, 83947845, 83961128, SBA360300080, D5NN9030A, D8NN9030BA, E1NN9030AA, E3NN9030AA, E6NN9030BA, For Diesel fuel only, (Item #: 153470) $3.98

Fuel Cap, Vented - This silver Fuel Cap is for Under Hood Fuel Tank. 2-7/8 inch outside diameter, 1/4 inch tall, Zinc finish, 1.788 inch edge of tang to edge of tang. Vented Verify OEM number for tractor models 1100, 1120, 1120, 1200, 1210, 1215, 1220, 1300, 1210, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 2110, 2120, 3415, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8530, 8630, 8700, 8700, 8830, 9000, 9200, 9700. Replaces 83961128, SBA360300080, E7NN9030AA. There are other Fuel Caps for some of these tractors please verify OEM number and measurements. (Item #: 184806, Ref: C5NN9030B) $8.90

Fuel Filter - This Fuel Filter is used in Ford/New Holland Tractors: 1000, 1110, 1120, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1600, 1620, 1630, 1700, 1710, 1715, 1720, 1725, 1925, Boomer 2030, Boomer 2035, T1510, T1520, T2210, T2220, TC18, TC21, TC21D, TC21DA, TC24D, TC24DA, TC25, TC25D, TC26DA, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, TC34DA, TZ18DA, TZ22DA, TZ24DA, TZ25DA. Replaces SBA360720130, SBA360720020, 1273082C1, 1273082C91, 87300039, PF7545 (Item #: 158083, Ref: SBA360720130) $10.10

Fuel Solenoid - Used on Ford Compact models: 1120, 1215, 1220, 1320, 1520, 1620, 1715, 1720, 1920, 2120, 1020, 1025, 1030, 1530, 1630, 1725, 1925, 2035. This part replaces OEM numbers 1447884, 185206080, 185206082, 185206083, 281552A1, 328605A1, 87761614, 87780758, SBA185206083, SBA185206084, SBA185206085. It is also used on New Holland models: Boomer 1020, Boomer 1025, Boomer 1030, Boomer 2030, Boomer 2035, Boomer 3040, Boomer 3045, Boomer 3050, Boomer 4055, Boomer 4060, T1010, T1030, T1110, T1510, T1520, T1530, T2210, T2220, T2310, T2320, T2330, T2410, T2420, TC18, TC21, TC21D, TC21DA, TC23DA, TC24D, TC24DA, TC25, TC25D, TC26DA, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, TC34DA, TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48DA, TC55DA, TT45A, TT50A, TZ18DA, TZ22DA, TZ24DA, TZ25DA, Workmaster 45, Workmaster 55 (Item #: 161664, Ref: SBA185206085) $49.90

Gauges

Oil Pressure Switch - Used on Ford Compact Models 1120, 1210, 1215, 1220, 1310, 1320, 1520, 1620, 1715, 1530, 1630, 1720, 1725, 1920, 1925 this part replaces OEM numbers 1447886, SBA185246060, SBA185246330, 83938238, 281554A1. This part is also used in New Holland models: Boomer 2030, Boomer 2035, Boomer 3040, Boomer 3045, Boomer 4055, Boomer 4060, T1030, T1510, T1520, T1530, T2210, T2220, T2310, T2320, T2330, T2410, T2420, TC18, TC21, TC21D, TC21DA, TC24D, TC24DA, TC25, TC25D, TC29, TC29D, TC30, TC31DA, TC33D, TC33DA, TC34DA, TC35, TC35A, TC35D, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC48DA, TC55DA, TZ22DA, TZ24DA, TZ25DA (Item #: 168010, Ref: SBA185246330) $16.60

Hitch / Drawbar

No
Picture
Coupler - Quick coupler, female half. For 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 119149, Ref: 4250-4) $25.10

Drawbar - For Ford tractor models 1320, 1520, 1620, 1715, 1720, 1920, 2120, 3415 Replaces Ford OEM number SBA370710260, , Compatible with New Holland tractor models TC30, Replaces New Holland OEM number SBA370710260, (Item #: 173814) $121.00

No
Picture
Pull Arm - Right hand or left hand 5/8 inch x 2-1/2 inch, 27.87 inch center to center. For tractor models (1320, 1520, 1620 1/1987 and newer, 1715 1/1993 and newer. (Item #: 172895, Ref: SBA370101092) $159.00

Rear Stabilizer Link - For Ford tractor models 1320 (8/1992-later), 1520 (8/1992-later), 1620 (8/1992-later), 1715 (1/1993-later) Replaces Ford OEM number SBA370500950, , Compatible with New Holland tractor models TC30, Replaces New Holland OEM number SBA370500950, Shaft Length: 6.75", (Item #: 174565) $38.60

Stabilizer Link - For Ford tractor models 1100 (1/1979-later), 1110 (1/1983-later), 1120 (1/1987-later), 1200 (1/1979-later), 1215 (1/1987-later), 1220 (1/1987-later), 1300 (1/1979-later), 1310 (1/1983-later), 1320 (1/1987-later), 1500 (1/1979-later), 1510 (1/1983-later), 1520 (1/1987-later), 1620 (1/1987-later), 1700 (1/1979-later), 1710 (1/1983-later), 1715 (1/1993-later), 1900 (1/1979-later), 1910 (1/1983-later) Replaces Ford OEM number SBA370500500, , Compatible with New Holland tractor models TC18 (7/1998-later), TC21 (7/1998-later), TC21D (7/1998-later), TC24D, TC30, Replaces New Holland OEM number SBA370500500, Length: 6.00", (Item #: 174571) $48.40

No
Picture
Swinging Drawbar - For Ford tractor models 1320 (1/1987-later), 1520 (1/1987-later), 1620 (1/1987-later), 1715 (1/1987-later), Replaces Ford OEM number SBA370710290, Length: 25.370", (Item #: 174566) $177.00

Hydraulic System

Breakaway Clamp, Double - Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 112480, Ref: 5006-4) $29.95

Hydraulic cylinder Kit - 3-spool valve and cylinder kit complete. For tractor models 1320, 1520, 1720, 1920, 2120. (Item #: 183440, Ref: HCKF293) $1873.77

Hydraulic Filter - This hydraulic filter is used on 1120 compact tractor, 1215 compact tractor, 1220 compact tractor, 1320 compact tractor, 1510 compact tractor, 1520 compact tractor, 1620 compact tractor, 1710 compact tractor, 1715 compact tractor. Outside Diameter: 3 11/16 inch (93), length: 5 3/4 inch (172), thread: 1 inch x 16 UNF. Replaces: Baldwin - BT8391, Fleetguard - HF6513, Ford 9846407, SBA340500380, SBA340500610, Wix - 51736. (Item #: 158958, Ref: 9846407) $52.00

No
Picture
Hydraulic hose Assembly - Hose, 30 inches long. For tractor models 1320, 1520, 1720, 1920, 2120, 5900. (Item #: 183826, Ref: H31-SPL-30) $35.40

Hydraulic hose Assembly - Hose, hose assembly 1/4 inch NPT male solid. (Item #: 179985, Ref: HV4961) $26.20

Hydraulic hose Assembly - Hose, hose assembly 1/4 inch NPT male solid. (Item #: 179987, Ref: HV4962) $36.80

Hydraulic hose Assembly - Hose, hose assembly 1/4 inch NPT male solid. (Item #: 179988, Ref: HV4964) $25.20

Hydraulic Hose Assembly - Hose, 48 inches. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2110, 2120. (Item #: 179697, Ref: HV4959) $21.50

Hydraulic Pump - Hydraulic Pump is used on 1120 Compact Tractor, 1215 Compact Tractor, 1220 Compact Tractor, 1320 Compact Tractor, 1520 Compact Tractor, 1620 Compact Tractor, 1715 Compact Tractor, 1720 Compact Tractor, 1920 Compact Tractor. Note: If equipped with SBA340450840 pump, some fittings and lines WILL NEED to be replaced with original lines and fittings. Replaces 83966846, SBA340450500 (Item #: 178896, Ref: SBA340450500) $595.00

Hydraulic side Link - Side link cylinder, Bore Size: 2 inches, Center Tube Length: 8 7/16 inches, Closed Length: 17 1/2 inches, Pin Diameter: 7/8 inches. (Item #: 180248, Ref: HSL2203) $534.00

Hydraulic top Link - Hydraulic top link cylinder, 2 inch bore. (Item #: 167135, Ref: HTL2102) $268.00

Hydraulic Valve Kit - Valve with handle, single-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Item #: 184596, Ref: HV4010) $408.00

Hydraulic Valve Kit - Kit assembly, includes 1-spool valve with handle. For tractor models 1320, 1520, 1720, 1920, 2120. (Item #: 180001, Ref: HV4118) $760.00

Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handles For 1320, 1520, 1720, 1920, 2120. (Item #: 178798, Ref: HV4124) $1309.01

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185320, Ref: HV4020) $765.30

Valve Box - Valve box horizontal mount, with three-handle assembly. All steel (14 gauge) unit has built-in handle pivots complete with actuator links. One straight handle in center position flanked by two offset handles. Removable cover has edge protectors installed. Will accommodate HV4033 valve or equivalent. Mounts on top of flat fenders. (Item #: HV4985) $94.68

Valve Less Handle - Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 178975, Ref: HV4023) $513.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 180405, Ref: HV4033) $691.00

Lights

Brake Light Switch - Replacing OEM part numbers 83968919, SBA385200730, SBA385200731, this switch is used on Ford compact models: 1215, 1220, 1320, 1520, 1620, 1920, 2120. It is also used on New Holland models Boomer 2030, Boomer 2035, Boomer 3040, Boomer 3045, Boomer 3050, Boomer 4055, T1510, T1520, T1530, T2210, T2220, T2310, T2320, T2330, T2410, T2420, TC23DA, TC30, TC31DA, TC34DA, TC35A, TC35DA, TC40A, TC40DA, TC45A, TC45DA, TC48DA, TC55DA, TZ18DA, TZ22DA, TZ25DA, 1320, 1520, 1620, 1920 (Item #: 168011, Ref: SBA385200730) $22.90

Oil System

Oil Pan, Used - For Ford tractor models 1320, 1520, 1620, 1715, 1720, Replaces Ford OEM nos SBA110706751, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443602) $99.01

Oil Pump - Used on Shibuara engines on Ford / New Holland models 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1920, 1925, 2120, 3415, CM272, CM274, L150, L160, L170, L465, L565, LS140, LS150, LS160, LS170, LX465, LX485, LX565, TC25, TC29, TC29DA, TC30, TC31DA, TC33, TC35A, TC40, TC40A, TC40DA, TC45, TC45A, TC45DA, TC48DA, TC55DA, TT45A, TT50A (Item #: 124143, Ref: SBA165026120) $120.00

PTO / Driveline

Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Item #: 180397, Ref: 9N715BC) $6.10

Sheet Metal / Body Parts

No
Picture
Right Hand Side Screen - Black - For Ford tractor models 1320 (1995 and Earlier), 1520 (1995 and Earlier), 1620 (1995 and Earlier) Replaces Ford OEM number SBA378105430, , Compatible with New Holland tractor models T1510, T1520, TC30, 1320, 1520, 1620, Replaces New Holland OEM number SBA378105430, (Item #: 185220) $108.00

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $27.00

No
Picture
Wheel Weight, Front/Rear, SBA372110491 - For Ford tractor models 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 2110, 2120, 3415 Replaces Ford OEM number SBA372110491, , Compatible with New Holland tractor models 1320, 1520, 1620, 1715, 1720, Replaces New Holland OEM number SBA372110491, OD: 17-7/8", ID: 9-7/8", Thickness: 2-3/8 ", Weight: 65 lbs each, Hole Pattern: 4 @ 7-7/8 " or 3 @ 12-3/16", (Item #: 128840) $97.00

Steering

Hydraulic Power Steering Pump, Used - For Ford tractor models 1120, 1215, 1220, 1320, 1520, 1620, 1715, Replaces Ford OEM nos SBA340450521, 87779281, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434630) $349.01

No
Picture
Spindle Bushing - Used with Spindles SBA330310760 and SBA330310770. 1.341 OD, 1.183 ID, .970 Length. For tractor models 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1600, 1620, 1630, 1715, 1725. (Item #: 104565, Ref: SBA398510080) $10.60

No
Picture
Spindle Bushing - 1.540 inch outside diameter, 1.380 inch inside diameter, 1.570 inches in length. For compact models TC25, TC29, TC30, 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1715, 1725. Used w/ SBA330310760, SBA330301920, SBA330301950, SBA330301910 and SBA330301940 Spindles. (Item #: 104562, Ref: SBA398510280) $16.50

Spindle, Left Hand - This Spindle is used on Ford / New Holland models: TC25 (9/98> 2WD), TC29 (9/98> 2WD), TC30 (2WD), TC33 (9/98> 2WD), 1320 (1/87> 2WD), 1520 (1/87> 2WD), 1530 (10/96> 2WD), 1620 (1/87> 2WD), 1630 (10/96> 2WD), 1715 (1/93> 2WD), 1725 (10/96> 2WD). Replaces SBA330301920, SBA330301920 (Item #: 104517, Ref: SBA330301920) $295.00

Spindle, Right Hand - This Spindle is used on Ford / New Holland models: TC25 (9/98> 2WD), TC29 (9/98> 2WD), TC30 (2WD), TC33 (9/98> 2WD), 1320 (1/87> 2WD), 1520 (1/87> 2WD), 1530 (10/96> 2WD), 1620 (1/87> 2WD), 1630 (10/96> 2WD), 1715 (1/93> 2WD), 1725 (10/96> 2WD). Replaces SBA330301940, SBA330301950 (Item #: 104516, Ref: SBA330301950) $281.90

Steering Arm - This Steering Arm is used on multiple Ford / New Holland compact tractors. It is used as left and right hand side on: TC25, TC29, TC33, 1320, 1520, 1530, 1620, 1630, 1725. It is right hand only on TC30 and 1715. Replaces original part number SBA334524880. (Item #: 104730, Ref: SBA334524880) $165.00

Steering Motor - For Ford tractor models 1320, 1520, 1620, 1715 Replaces Ford OEM number SBA334010922, , Compatible with New Holland tractor models TC25, TC25D, TC29, TC29D, TC33, TC33D, 1530, 1725, 1925, (Item #: 160079) $771.00

Steering Motor - For Ford tractor models 1220, 1320, 1520, 1920, 2120, 3415 Replaces Ford OEM number SBA334010932, , Compatible with New Holland tractor models TC25, TC25D, TC29, TC29D, TC33, TC33D, 1320, 1520, 1530, 1920, 1925, Replaces New Holland OEM number SBA334010932, (Item #: 160080) $1289.01

Steering Wheel - This 3 spoke steering wheel comes with a cap. For models 1979 and later. Ford 1100, 1110, 1200, 1210, 1120, 1215, 1220, 1320, 1520, 1620, 1720, 1920, 2120, 3415, TC30, T1510, T1520. Note, this steering wheel has a flat underside where it meets the column. Some of they models may have a dished back and this wheel will not work. Replaces SBA334310110, SBA334300050, 794200-15710, 194440-15700, 194440-15800, 794262-15710, 66611-41400 (Item #: 155115, Ref: SBA334300050) $59.00

Wheels

Rear Rim - Demountable; 10 X 24, 4 Loop. Used on Ford Compact models with 11.2-24 and 12.4-24 tires. This rim replaces Ford New Holland part numbers SBA336120320, 83921754, SBA336120630. This rim is used on 1520, 1620, 1700, 1710, 1720, 1900. Verify size before ordering. Tractors come equipped with more than one rim side. The rim width is measured from bead to bead across the inside of the rim, where the tire rests. (Item #: 184357, Ref: SBA336121590) $365.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $1.04

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.60

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.70

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $18.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Ford 1520 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford 1520 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 1520 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Ford 1520 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford 1520 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford 1520 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $8.60

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.10

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.40

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.80

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $117.34

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $30.80

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $68.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $74.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $28.40

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $280.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $24.20

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $58.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.10

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $52.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $42.60

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $35.20

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $111.00