FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 335 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Actuator Assembly, 8 - For tractor models 2810, 2910, 335, 340, 340A, 340B, 3900, 3910, 4000, 4100, 4110, 420, 4400, 445, 445A, 450, 4600, 4610, 515, 532, 540, 540A, 540B, 545, 545A. (Item #: 128275, Ref: D5NN2N317A) $99.00

Brake Adjuster Assembly - Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531, Dexta, Super Dexta. Replaces OEM numbers C5NN2N046B, 957E2039, 957E2043, 957E2044, 81815741. (Item #: 166242, Ref: 1850213M91) $22.70

Brake Anchor Spring - This Brake Anchor Spring is 4 inches overall length, has a 2-3/8 inch coil length and 5/8 inch coil diameter. It is used on the following Ford Tractors: 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531, Dexta, Super Dexta. Replaces 957E2036, C5NN3A346B (Item #: 178056, Ref: 957E2036) $5.00

Brake Backing Plate - Fits the following, all built after December 1966: 2110, 2120, 2310, 2600N, 2610, 2810, 2910, 3100, 3120, 3190, 3610, 3910, 4000, 4110, 4600, 4610, 2000, 3000, 4110, 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 230A, 234, 334, 530A. Replaces 81815610, C5NN2212D (Item #: 105507, Ref: C5NN2212D) $165.00

Brake Cable - This Brake Cable is 1855mm (72.3 Inches) overall length. Outer Cable length is 1697mm (66.81 Inches). This cable is used in single cable systems on Ford / New Holland: 230A, 2310, 233, 234, 2600, 2610, 2810, 2910, 333, 334, 335, 3600, 3610, 3910, 4100, 4110, 4600, 4610, 530A, 531, 5600, 5700, 6600, 6700, 6710, 7600, 7700, 7710, 7810, 7910, 8210. Replaces D6NN2853B, D5NN2853A, 83918382 (Item #: 182932, Ref: D6NN2853B) $80.00

Brake Cable, Left Side - This Brake Cable is 946mm (26.7 Inches) overall length. Outer Cable length is 725mm (28.50 Inches). It is used on the Left side on: 230A, 2310, 234, 2610, 2810, 2910, 333, 334, 335, 335, 3610, 3910, 4110, 4610, 5110, 530, 530A, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210. For Right Side, Order E1NN2853AB. Replaces E1NN2853AB, 83957515, E1NN2853AA (Item #: 180158, Ref: E1NN2853BC) $53.00

Brake Cable, Right Side - This Brake Cable is 1861mm (73.25 Inches) overall length. Outer Cable length is 1646mm (64.80 Inches). It is used on the right side on: 230A, 2310, 234, 2610, 2810, 2910, 333, 334, 335, 335, 3610, 3910, 4110, 4610, 5110, 530, 530A, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210. For Left Side, Order E1NN2853BC. Replaces E1NN2853AB, 83957515, E1NN2853AA (Item #: 170967, Ref: E1NN2853AB) $51.00

Brake Disc - Used in late production, this disc has a 1-9/32 wide facing. This disc is 8.070 inches outside diameter, 2.086 inches inside diameter with 22 splines. Replaces Ford part numbers 86529646, E9NN2N097AA, 83983209, E9NN2A097AA (Item #: 105497, Ref: E9NN2A097AA) $29.90

Brake Drum - Fits 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 334, 335, 530, 531. (Item #: 105494, Ref: C5NN1126E) $69.00

Brake Pedal Return Spring - Brake Pedal Return Spring measures 3 1/4 inches and wire thickness of .100. Fits tractors: 2000, 2300, 2310, 2600, 2610, 3000, 3610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 3400, 3500, 4110LGC, 530A, 531 (Item #: 124542, Ref: E1NN2472BA) $4.30

Brake Pedal Shaft - 18.46 inches in length. For tractor models 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. Brake pedal return spring E1NN2472BA and bushing C5NN2N477A are available separately. (Item #: 165726, Ref: D9NN2N337FA) $134.00

Brake Rod - Cross shaft to actuator shaft, 7-3/4" from center of holes to end of shaft, 3/8" UNF thread. For tractor models 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 4110LCG, 530A, 531. (Item #: 170959, Ref: C7NN2466A) $15.60

Brake Rod Seal - For tractor models 3000, 4000, 5000, 7000, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2810, 2910, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, (5640, 6640, 7740, 7840, 8240, 8340 with 8 x 2 or 16 x 4 transmission), 250C, 260C, 335, 340, 340A, 340B. Replaces E7NN2N336A, 85999093. (Item #: 105644, Ref: C5NN2N336A) $3.70

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Item #: 150914, Ref: D9NN2N289AA) $3.30

Brake Shoe - Shoe, with lining, 2 inches wide. Price shown is for each, 4 used per tractor. Replaces C7NN2218A, 86531521. Verify 2 inch width before ordering. (Item #: 105491, Ref: C7NN2218A) $40.00

Brake Shoe Spring, Primary to Secondary - This Spring is 5-3/16 inches over all, has a 2-11/16 inch coil length and a 5/8 inch coil diameter. It is used on tractor models Dexta, Super Dexta, 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531. Replaces original part numbers 957E2035, 81717325, C5NN2B289A (Item #: 124543, Ref: 957E2035) $4.80

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Hand Brake Disc - Diameter 4 inches, 1-1/4 inch hub, 23 splines. Also replaces: D5NN2N625A and C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 and newer - UK), (2000, 3000, 4000 all from Jan/1972 and newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. Replaces C5NN2N625B, D5NN2N625A, E9NN2N625AB, 83906199, 81867258 (Item #: 105495, Ref: E9NN2N625AB) $42.50

Hand Brake Repair Kit - This Hand Brake Repair Kit contains Rod. Knob, Pawl and Spring. Replaces 81816243, C7NN2N606B, C7NN2N616D, C5NN2N615B, 81708853, E0A2744, 81819533, 81819534, 81876606 (Item #: 183910, Ref: S.66303) $16.70

Clutch

Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7/8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Item #: 122258, Ref: AG15) $24.80

Clutch Disc - For tractor models Dexta, Super Dexta, 3610, 2810, 4600, 4100, 3400, 2100, 335, 2910, 3100, 233, 3000, 3910, 2110, 4140, 4000, 4500, 4610, 2000, 3600, 2310, 4400, 231, 3500, 2300, 2610, 4110. 11 inch disc, 1 inch X 15 spline. (19528S) (Item #: 182811, Ref: F0NN7550CA) $102.00

Clutch Disc, 11 inch - Torsion Dampened, Organic, 1 inch Spline Diameter, 10 Spline. For tractor models 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 333, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4200, 4400, 4410, 4600. (Item #: 130081, Ref: 328015716) $80.00

Clutch Disc, 11 Inch - 15-Spline, 1 inch Hub, Woven Facing. For Tractors including: (2000 and 3000 1965 to 9-1969) Replaces C7NN7550C. Models with 7 and 8 speed transmissions and PTO. Also fits the following models (less PTO): (4100, 4110, 4200 1965 to 9-1969), (4100 10-1971 and up). 83971425, C7NN7550V, E8NN7550BA, C7NN7550B (Item #: 122241, Ref: C7NN7550V) $73.00

Clutch Disc, 11 Inch - This is a Rigid Disc, no Springs. It is 11 inch, 15 Spline, 1 inch Hub, Rigid Disc, Fiber type material. Replaces E8NN7550BA, C7NN7550V, 328024710, 3280247101. (Item #: 122241, Ref: 328024710) $73.00

Clutch Disc, 13 Inch - Clutch Disc, 13 inch, 10-spline, 1 inch Hub, no Damper Springs. For 2810, 2910, 335, 3550, 3910, 4110, 420, 4400, 4410, 4500, 4600, 4610, 515, 532, 535. Replaces D1NN7550B, E3NN7550BA, VPG2204, 333008810, 3554214, 81825076, 82006015, 83937180, 1112-6025, 81866447, 87295809. (Item #: 149792, Ref: F0NN7550BA) $93.00

Clutch Kit - This single stage clutch kit contains a 11 inch, 10 spline rigid drive clutch disc (87295808), a 11 inch single pressure plate with six bolt mount, (used 1969 and later) (C9NN7563D), a pilot bearing which measures 1.575 inches OD, .669 inch ID, .472 inches wide (C5NN7600A), new release bearing which measures 4.0700 inches outside diameter, 2.4997 inches inside diameter, 0.8700 inches wide (83914247), and clutch alignment tool. **NOTE** Some tractors use a release bearing which measures 2.0625 inches inside diameter, 3.515 inches outside diameter and .840 inches in width. If you need this smaller bearing, also order part number N1087. For tractor models 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D. (Item #: 183011, Ref: D0NN7563A-KIT) $258.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11 inch 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1 inch by 10 spline and 1-7/8 inch by 29 spline pilot tool. (Item #: 192660, Ref: 1112-6113) $338.00

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Item #: 119878, Ref: FC563ZNKIT) $339.00

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4 inch hub 82011593, 13 inch single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB (Item #: 112322, Ref: 11126087) $360.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A) $5.10

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Item #: 135020, Ref: D8NN7563DB) $186.00

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Item #: 166322, Ref: C5NN7A615A) $5.70

Ford Clutch Kit - Double clutch assembly, 11" x 8-1/2", with 8-1/2" PTO disc. Includes 11" clutch disc, 15 spline, 1" hub, woven facing, New release and pilot bearing with clutch alignment tool. Tractors: 231, 233, 333, 335, 531, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2600N, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3600N, 3600V, 4000, 4110. (Item #: 180764, Ref: 6X7502W15K) $852.00

Pilot Bearing - For tractor models 1800, 1801, 1821, 1841, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3610, 3630, 3910, 3930, 4031, 4100. 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. Replaces 81805417, B7600A3, C5NN7600A (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly - Pressure Plate Assembly, 11" single clutch. Ford/New Holland Tractors: 2000 (3 cylinder), 2100, 2110, 2120, 2300, 2310, 3000, 3100, 3110, 3120, 3300, 3310, 3330, (10/1969 to 5/1971). Ford/New Holland Industrials: 3400, 3500, 3550, 230A, 231, 233, 234, 333, 334, 335, 530A, 531 Replaces C9NN7563E, D0NN7563A, D0NN7563AGV, C9NN7563DGV, C9NN7563EGV (Item #: 130091, Ref: C9NN7563E) $173.00

Pressure Plate Assembly - This is an 11 inch Double Clutch with a 29 Spline 8 1/2 inch PTO Disc with 1 7/8 inch hub, and a 1.750 inch Flywheel Step. It replaces part numbers 86634451, D8NN7502AA, D8NN7502BA, D8NNY502AA and 83939291. (Item #: 159119, Ref: D8NN7502BA) $338.00

Pressure Plate Assembly, 13 Inch - This is a 13 inch pressed steel Pressure Plate Assembly, with release plate. It has a 57mm Release Lever Height. If you need 63mm Release Lever Height, also order F1815816 Shim Kit. Used on 335, 340, 3400, 340A, 340B, 3550, 420, 440, 4400, 445, 445A, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 4330, 4340. Replaces C5NN7563AD, C5NN7N513A, E0NN7563AA, E0NN756AA, 83925714 (Item #: 158989, Ref: C5NN7563AD) $230.00

Pressure Plate Shim Kit - This Shim Kit contains (4) 0.090 inch thick shims. It is used with 13 inch pressure plates C5NN7563AD and C5NN7563AC when needed. Replaces C5NN7N596B. (Item #: 183914, Ref: F1815816) $24.20

PTO Clutch Disc - PTO Disc 8-1/2 inch, 29-Spline, 1-7/8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12/1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12/1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1/1965-12/1974), (335 utility 10/1975-9/1978), 3500, 3550, (3600 10/1975 and up), 3600N Narrow, (3610 10/1981-12/1984), 3910, 4600, 4600O, 4600SU, 530A. (Item #: 169901, Ref: C5NN77641B) $65.00

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $22.50

Cooling System

Fan Belt - Fits 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 230A, 231, 334, 335, 420, 515, 530A, 531, 532, 535, 545D 650, 750, 755, 755A, 755B. Some of these tractors used more than one type of belt. Verify part number before ordering. 1/2 Inch (13 mm) x 55 7/16 Inches (1408 mm) raw edge v-belt. (Item #: 118363, Ref: D4NN10C318A) $11.00

Fan Blade - 4 Blade - Fan Assembly, 4 Blade, 16 inch diameter, 0.625 inch pilot hole, and mounting holes on 2.5 inch center. For tractor models 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3900, 3910, 4000, 4100, 4110, 420, 4400, 4500, 4600, 4610, 5100, 515, 531, 535, 5600, 6600. Replaces 87017802, 81805721, C5NN8600B, C5NN8600A (Item #: 155455, Ref: C5NN8600A) $44.00

Fan Shroud - Shroud, Radiator Fan. Ford Tractor (s) 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3610, 3900, 3910, 4000, 4100, 4110, 4200, 4400, 4410, 4600, 4610. Compatible with Ford Construction and Industrial (s) 230A, 231, 233, 234, 333, 334, 335, 445, 515, 530, 530A, 531, 532, 545, 555, 4140. Fiberglass type. Must drill holes. Not like original. Replaces 83910061, 87770026, C5NN8146H, C5NN8146J, D4NN8146A, D6NN8146C, D6NN8146H (Item #: 116905, Ref: D6NN8146H) $80.00

Fan Shroud - This fan shroud is plastic and fits models 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630, Industrials 230A, 234, 250C, 260C, 334, 335, 340A, 530A, 540B. Also replaces E0NN8146DC and 81863583. (Item #: 165226, Ref: E0NN8146DB) $61.00

Radiator Hose, Bottom - Inside diameter 1.725 inches. Fits GAS and DIESEL MODELS: 2000 (3 Cylinder), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420, 4600. GAS ONLY MODELS: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Item #: 113920, Ref: C5NN8286B) $8.40

Radiator Hose, Lower - This Lower Hose has an inside diameter on the small end of 1.645 inches and 1.757 on the larger end. For tractor models 445 Diesel and Gas, 450 Diesel and Gas, 4500, 535, 540 Diesel, 545 Diesel, 6500 Construction, 335, 5000, 5100, 5600 (without Oil Cooler), 5900 (without Air Conditioning), 6600 (without Oil Cooler), 7000, 7100, 7600 (without Oil Cooler). (Item #: 116911, Ref: C5NN8286C) $10.00

Radiator Hose, Upper - This Upper Hose is for Gas engines. Hose inside diameter 1.5 inch. Fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700. (Item #: 113921, Ref: C5NN8260D) $9.50

Radiator Hose, Upper - Hose inside diameter 1.5 inch. FITS: 2000 (3 Cylinder DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 115045, Ref: D5NN8260D) $5.80

Thermostat - 180 Degree - Used on Ford / New Holland 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4610SU, 4630, 5110, 5610, 5900, 6410, 6500, 6610, 6710, 6810, 7410, 7610, 7710, A62, 230A, 234, 334, 335, 530A, 650, 750, 755, 755A, 755B. Replaces E0NN8575AA, 83931532, 3931532, E0NN8575AA, 87802745. Also used on New Holland Skid Steer Loaders: L180, L781, L783, L785, L865, LX865, LX885. (Item #: 163358) $12.40

Water Outlet Housing - Housing, Water Outlet Connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700. (Item #: 127343, Ref: C7NN8594B) $11.80

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Item #: 117437, Ref: E5NN8507AB) $0.90

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford/New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Item #: 117438, Ref: E6NN8513AA) $3.80

Drive Train

Axle Shaft Seal - Seal and Retainer Assembly, Outer, for Rear Axle Shaft. For tractor models 3250C, 260C, 2810, 2910, 3055, 335, 340, 340A, 340B, 345C, 345D, 3550, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83999828, C5NN4969B, C5NN4969D, 81819097, 81809097, 81875227, 81859537, F2NN4969AA, E0NN4969AA (Item #: 163590, Ref: C5NN4969D) $18.60

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $15.98

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Item #: 183460, Ref: C5NN7A452A) $19.00

Bearing Retainer Gasket - This Bearing Retainer Gasket (Shim) is used on Ford New Holland tractors 1965 and later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3610, 4000, 4110, 4110LCG, 531. Replaces D1NN4229A, 81825098 (Item #: 182922, Ref: D1NN4229A) $43.30

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Item #: 179412, Ref: D4NN4N507A) $16.00

Countershaft - Hollow for tractor models with 6 speed and Trans PTO: 2000, 3000, 2600, 3600, 231, 233, 335, 2110, 3400, 3500, 4500. (Item #: C5NN7111B) $188.87

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $492.55

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Item #: 170135, Ref: E0NN7106BA) $65.00

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Item #: 177372, Ref: C5NN7N166B) $24.90

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Item #: 179801, Ref: 195159M1) $28.90

Differential Lock Coupler - Used in Ford equipment with differential lock, 1965 and later, this part replaces Ford / New Holland part numbers: C5NN4N064A, 81812261, 81871527. This part is used on the following models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5190, 5200, 532, 5340, 535, 540, 545, 550, 5500, 555, 5550, 555A, 555B, 555C, 555D, 555E, 5600, 5610, 5610S, 575D, 575E, 5900, 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6610S, 6700, 6710, 6810, 7000, 750, 7500, 755, 755A, 755B, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, TS100, TS90 (Item #: 180499, Ref: C5NN4N064A) $109.00

Differential Lock Nut - For tractor models 2000, 231, 233, 2600, 3000, 333, 335, 3600, 4110, 531. (Item #: 152214, Ref: C5NN4N001A) $21.70

Gear, 2nd and 5th - 41/28 Tooth, 1.775 inch inside diameter, 6.125 inch outside diameter. For tractor models 2000, 2110LCG, 231, 233, 2600, 3000, 335, 3400, 3500, 3600, 4110LCG, 4400, 4500, 531, Dexta, Super Dexta. All with 6 speed transmissions. Replaces 957E7101B (Item #: 100024, Ref: 957E7101B) $111.00

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. Replaces C5NN7N012B. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, 83963585, E2NN7N012AA, E6NN7N012AA, 81872311, 83960462, 81813476 (Item #: 170396, Ref: E6NN7N012AA) $215.72

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Item #: 170396, Ref: 83960462) $215.72

Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000, 3055, 3100, 3330, 335, 3400, 3500, 3600, 4000, 4100, 4110LCG, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 531, Dexta, Super Dexta. Replaces E49GA9 (Item #: 178386, Ref: E49GA9) $125.00

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534) $3.60

Gear Shift Coupler, Front - 28 teeth, 17 splines. For tractor models 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Item #: 163571, Ref: E6NN7N072AA) $95.00

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Item #: 121228, Ref: E440GB9) $2.90

Gear Shift, Rail - High/Low. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Item #: 172806, Ref: C5NN7240AD) $56.00

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $37.30

Input Drive Shaft - This Input Drive Shaft is 17.66 inches long, has 10 splines and 19 teeth. Replaces original part numbers C5NN7017AC, C7NN7017AB, 81813988, 81820864 (Item #: 166070, Ref: C7NN7017AB) $83.00

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $24.90

Main Shaft Pilot Needle Bearing - This Main Shaft Pilot Needle Bearing is used on 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3600, 3610, 530A, 531, Super Dexta. Measures 0.9973 inches inside diameter x 1.3735 inches outside diameter x 0.875 inches wide. Replaces 960E7120, C5NN7120B, 81821350, C9NN7120A (Item #: 182990, Ref: C5NN7120B) $47.90

Mainshaft, Transmission, Rear - 30 teeth, 17 and 28 splines. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) Replaces C5NN7C095D, 81804717 (Item #: 166035, Ref: C5NN7C095D) $150.98

Oil Seal, Secondary Output Shaft - For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. Measures 83mm outside diameter x 46mm inside diameter x 14.8mm width. Replaces E42GA9, 81717023 (Item #: 176493, Ref: E42GA9) $7.70

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Item #: 150013, Ref: 86512015) $14.20

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA) $358.00

Output Shaft Pilot Bearing - Measures 25mm inside diameter, 52mm outside diameter, 16.25mm wide. It replaces: E76GA9, C5NN7N014A, 86705858, C5NN7N047A, C5NN7N044A, 83990517, 81804636, 81804637, C5NN7N048A, F718701030030, 339482X1, 3010151X91, 194145-11910, 971326, 30205, 30205M-TIM, 30205M (Item #: 185088, Ref: C5NN7N014A) $15.70

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Item #: 172919, Ref: D9NNC729BA) $7.50

PTO Input Housing Gasket - Used on many Ford / New Holland tractors, 1965 and later. It replaces OEM part numbers 81804647, 81804648, 83959976, C5NN7N051A, C5NN7N051B, E7NN7N051AA (Item #: 179416, Ref: C5NN7N051B) $1.10

Rear Axle - This is a Collar Type Rear Axle used on the following 1965 or later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3610, 4000, 4110, 4110LCG, 531. Additional $10 shipping due to size and weight. Replaces D7NN4244A, C5NN4244A, 83912192 (Item #: 182961, Ref: C5NN4244A) $284.00

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91) $6.40

Secondary Output Shaft Bearing - This Secondary Output Shaft Bearing measures 1.5000 inches inside diameter, 3.2500 inches outside diameter, 0.7500 inches width. Replaces original part numbers E53GA9, 81800632, SKF RLS 12 (Item #: 180301, Ref: E53GA9) $53.00

Secondary Output Shaft Bearing - With measurements of 19mm inside diameter, 53.9mm outside diameter, and 15.9mm this bearing and cone assembly replaces Ford / New Holland part numbers D0NN7N047A, D2NN7111A, 81823619, 81823620, 81822960, 82930758, E6NN7061BA, E6NN7106AA, D0NN7N048A (Item #: 182935, Ref: D0NN7N047A) $39.10

Shift Cover Assembly - 6/8 speed with dipstick hole. Fits 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Includes cover, levers, lever knobs and lever boots. Order C5NN7N225A gasket and 83929967 dipstick separately. Replaces D3NN7211A. (Item #: 178429, Ref: D3NN7211A) $130.00

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Item #: 125339, Ref: C5NN7N225A) $4.00

Shifter Assembly, Cast Iron - For tractor models with 6, 7 and 8 speed transmissions from 10/1966 to 1975. Complete Shift Cover Assembly includes cover, shifter boots. DOES NOT INCLUDE GASKET, KNOBS BOOTS OR PLUGS. We do not have plugs available. Order C5NN7N225A gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 184788, Ref: C5NN7211E) $113.00

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10/1966. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 125338, Ref: S.66211-LG) $80.00

Sliding Coupling - This Sliding Coupling is used in Ford tractors 1965 and later with 6 speed transmission. Replaces C5NN7106A, 81804736 (Item #: C5NN7106A) $47.98

Spider Cross, Differential - For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. Replaces C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Item #: 113611, Ref: E1NN4211AA) $63.00

Transmission Gasket Set - Transmission Gasket Set for 3 cylinder Fords, 1965 and up with 6 or 8 speed Non-Synchro Transmissions. (Item #: 178201, Ref: S.65396) $29.60

Transmission Oil Cooler - For tractor models (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6/1973 and up). (Item #: 179485, Ref: D3NNH860A) $369.00

Transmission Oil Cooler - For tractor models (233, 333, 335, 532, 2600, 3600 all with cab), 230A, 234, 334, 530A, 2310, 2610, 2810, 2910, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5600, 6600, 7600. (Item #: 119276, Ref: D4NNH860A) $229.00

Transmission Oil Dipstick - Also replaces E1NN7A020BA, D3NN7A020B and 81842758. For models: 340A, 340B, 345C, 345D, 515, 535, 540, 545, 230A, 231, 2310, 233, 234, 250C, 260C, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 445A, 4600, 4610, 4630, 4830, 5030, 530A, 531, 532. (Item #: 128144, Ref: 83929967) $8.20

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Item #: 155727, Ref: C5NN77086A) $5.90

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA) $91.00

Electrical System

Alternator - 12 volt, 51 amp. Will replace 31 and 37 amp alternators. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 and 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K, D5NN10300D (Item #: 111069, Ref: D5NN10300E) $160.00

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Ford New Holland 8400, 8530, 8600, 8630, 8700, 9200, 9600, 9700, 9710, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 230A, 2310, 233, 234, 2600, 2610, 2910, 335, 3600, 3610, 3910, 4610, 530A, 5600, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8730, 8830, 9000. Replaces D2NN19N581B, D5NN18527AA, D5NN18527AA, V103596, V18380, V35513. (Item #: 108656, Ref: 72162089) $73.00

Distributor Assembly, Complete - This new, Complete Distributor is an improved design using a Mechanical Advance. Replaces original vacuum advance distributors. Fits Ford 3 cylinder tractors from 1965-1980. Fits 2000, 2100, 2110, 2120, 2150, 2300, 230A, 2310, 234, 2600N, 2600R, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3910H, 3910N, 3910R, 4000, 4100, 4110, 4110N, 4140, 420, 4200, 4330, 4340, 4400, 445, 445A, 450, 4500, 4600NO, 4600O, 4600SU, 4610N, 4610NO, 4610O, 4610SU. Tune-up parts interchange with the original. Replaces 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA. (Item #: 153416, Ref: F1NN12100AA) $119.00

Distributor, Rebuilt - Complete Remanufactured Distributor for Ford 3 cylinder tractors from 1965 to 1980 with distributor 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA, C5NF12127B. Does not include the Vacuum Advance. Vacuum Advance is not available. F1NN12100AA is available new with a Mechanical Advance. A refundable $100.00 core charge will be added to your order. (Item #: 203560, Ref: C7NF12127D) $295.01

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Item #: 112273, Ref: 376852R91) $10.90

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $9.80

Ignition Switch, Keyed - This three position Ignition Switch has 5 terminals. Gas or diesel without cold start.It is widely used on Ford / New Holland Tractors 1965 and later. Comes with 2 keys. Replaces C5NN11N572A, D3NN11N572A, 81806736, 81838693, 82849165. (Item #: 185146, Ref: D3NN11N572A) $18.10

Starter - New Starter with Drive for Gas Engine 1965 and later, on: 2000, 2030, 3000, 4000, 4110, 2600, 3600, 4600, 2610, 3610, 4610, 230A, 231, 234, 334, 335, 340, 340A, 3400, 3500, 420, 4400, 4500, 445, 530A, 531, 535, 540A, 545, 550, 555. Replaces S-2014, SFD0089, C5NF-11001-B, C5NF11001B, C7NF-11001-B, C7NF11001B, D0NF-11001-A, D0NF11001A, D1NN-11001-A, D1NN11001A, D7NN-11001-A, D7NN11001ARXL, HD7NN11001AR, SA-640, SA640, SG-0060R, S4531, 1100-0112, 2-1813-FD, 3130, 3139, 3139N, 41-3139, 410-14005R, 44-4232, 62006, 72-3139, 91-02-5799, 99000 (Item #: 111095, Ref: D7NN11001A) $100.00

Starter - With single contact solenoid, 12 volt, 10 tooth, clockwise rotation. For tractor models (231 1975-81 with 3-158 dsl), (233 1975-77 with 3-158 dsl), (250C, 260C 1990-94 with 3 cyl dsl), (333 1975-77 with 3-175 dsl), (335 1975-78 with 3-175 dsl), (340 1979-81 with 3-175 dsl), (340A, 340B 1981-84 with 3-175 dsl), (345C 1989-92 with 3 cyl dsl), (345D 1992-97 3 cyl dsl), (445 1979-83 3-183 dsl), (445A 1984-88 3-183 dsl), (445C 1989-92 with 3-183 dsl), (445D 1992-98 with 3-183 dsl), (515, 531 1975-81 with 3-201 dsl), (535 1975-77 with 3-201 dsl), (540A 1981-84 with 3-201 dsl), (540B 1984-88 with 3-201 dsl), (545 1979-83 3 cyl dsl), (545A 1984-88 with 3 cyl dsl), (545C 1989-92 with 3 cyl dsl), (545D 1992-98 with 3 cyl dsl), (550 1975-78 with 3 cyl dsl), (620, 622 1967-74 gas and dsl). Replaces 26395, 26211, 26339A. (Item #: 100300, Ref: SLU0002) $160.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $165.00

Starter Drive - Starter Drive for TISCO 5 inch diameter starter replacement for D8NN11000CE. Does not fit Ford original D8NN11000CE. Will service original 4-1/2 inch diameter Ford starter D8NN11000DA. For 2000, 230A, 231, 233, 234, 3000, 333, 334, 335, 4000, 530A. (Item #: 179782, Ref: D2NN11350C) $165.04

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Item #: 119934, Ref: E4NN11350AA) $29.20

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $28.40

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Item #: 115052, Ref: C7NN7A247A) $15.10

Starter Safety Wire Assembly - For tractor models (2000, 3000, 4000 with 6 or 8 speed trasnmissions 10/1966 to 1975), 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Replaces D4NN7A488B, D4NN7A488BB, E4NN7A488BB, E4NN7A488CA, 81827298, 83948129, 83963950 (Item #: 125405, Ref: D4NN7A488BB) $17.30

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford / New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford / New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Item #: 128269, Ref: E2NN11390AA) $29.00

Starter Solenoid - For Starter D8NN11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12/1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (1981-1983), 2810 (1984-1990), 2910 (1983-1990), 3310 (1965-1974), 4000 series (1965-1974), 4100 (1975-1981), 4110 (1981-1990), 4600 (1975-1981), 4610 (1981-1990), 5340 (1968-1974) 6600 gas 1975-1981, 7000 series (1971-1974). NOT FOR D8NN11000CE 5 inch starter. (Item #: 119935, Ref: D7NN11390A) $33.00

Starter Solenoid, 12-Volt - Relay assembly, 12 volt, 4 terminal. Grounded through the base. For most 12 volt GAS models 1955 and later including: 601, 801, 801, 1100, 2000, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 3500, 360, 3610, 3900, 3910, 4110, 4140, 420, 4330, 4340, 4400, 4410, 445, 450, 4500, 4600, 4610, 5000, 5110, 515, 530, 531, 5340, 535, 540, 545, 550, 5600, 5610, 5700, 5900, 6410, 655, 6600, 6610, 6710, 6810, 7000, 7410, 7600, 7700, 7710. Replaces 311007FR. I terminal DOES ground through the base. (Item #: 105689, Ref: D2AF11450AA) $10.50

Voltage Regulator - This is a 12v, 14.4 volt set, A-circuit, with battery temp sensor. Fits alternators: E7NN10B376AB, E7NN10B376BB, E3NN10B376AD, 81863039, 81863039, 81868798. Fits on the back of Lucas/Marelli alternators. Replaces E8NN10316AA, 83981529 (Item #: 182960, Ref: E8NN10316AA) $38.20

Voltage Regulator, 12 Volt - Voltage Regulators for Motorola Style Alternator, numbers D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D used on models (2810, 2910, 334, 335 Hiway 3610, 3910, 4110, 5110, 530A, 5610, 5900, 6610, 6710, 6810, 7410, 7710 diesel with alternator built between 1/1/1981-8/31/1986), (335 diesel with alternator 10/1975-9/1978), (340B, 445A, 540B, 545A diesel with alternator 6/1985-8/31/1986), (4610 diesel with alternator 1/1/1986-8/31/1986), (6500, 7500 1974-10/1975), (7000, 8000, 9000 diesel with alternator 1958-1964), (8000, 8200, 8400, 8600, 9000, 9200, 9600 diesel with alternator 11/1/1971-12/31/1978). Replaces D1NN10316A, D1NN10316B, 21A656, D7NN10316B, D3NN10316A (Item #: 119939, Ref: D1NN10316A) $39.00

Engine Bearings

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .010 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106315, Ref: MBK633-010) $78.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .020 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106316, Ref: MBK633-020) $70.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .030 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106317, Ref: MBK633-030) $38.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, STD - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106314, Ref: MBK633) $78.00

Engine Gaskets

Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Item #: 123602, Ref: C7NN6N008B) $6.60

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $9.50

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Item #: 106335, Ref: F0NN6710AA) $9.20

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.10

Valve Cover Gasket, 3 CYL - Gasket, Valve Cover. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535. (Item #: 128747, Ref: C7NN6584B) $6.10

Engine Parts

Camshaft - For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610, 4100, 3055, 3100, 335, 340, 3400, 3500, 3550, 3900, 3910, 4110, 4140, 420, 4200, 4400, 4410, 4500, 515, 532, 535, 545, 550, 555, ALL 3 CYLINDER DIESELS. 3610, 3910, BOTH GAS ENGINES. Camshaft also replaces C7NN6250E, 87800323. (Item #: 150910, Ref: E8NN6250AA) $112.00

Connecting Rod Assembly (36mm Journal) - New. Replaces C7NN6200A, E3HN6200AC, E4NN6200AB, E9NN6200AB, E9NN6200CA, F9NN6200AB, 81864279, 81875622, E3HN6200AC42, F2NN6200BA (*NOTE: Replace the complete set when replacing C5NE6200A Gas 1965-3/1968).C7NN6200A (Item #: 128642, Ref: C7NN6205) $99.00

Crankshaft, 3-Cylinder, 4.2 in. Stroke - For 3-cylinder 4.2 inch stroke engines. (Note: we also have crankshafts for 4.4 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 175 cubic inch engine 4.203 stroke 3 cylinder 183 CID and 192 CID engine. For tractor models (3000 Gas/Diesel), (4000 Gas 1965 to 3/1968), 2610 Diesel, 2910 Diesel, (3610, 3910 Gas/Diesel), (3230, 3430, 3930 up to 9/1990. Industrials: 230A Diesel, (250C, 260C Up to 9/1990), (234, 334, 335, 340A, 340B Gas/Diesel), 345C, (3400, 3500 Gas/Diesel), 445C, (4400, 4500 Gas 1965 to 3/1968. Replaces C5NE6303R. Additional $120.00 shipping due to weight. (Item #: 172719, Ref: F0NN6303NA) $684.30

Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A) $136.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

Flywheel With Ring Gear - Used on Ford 3400 (1/1/65-5/31/68), 5000, 5100, 5190, 5200, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 335, 340, 3500 (1/1/65-5/31/68) all with 12 inch clutches. This new flywheel includes E2NN6384AA - 128 tooth ring gear. This part replaces E0NN6375HA (Item #: 159167, Ref: E0NN6375HA) $880.00

Flywheel With Ring Gear - This new flywheel includes E2NN6384AA - 128 tooth ring gear. It is used on tractors with 11 inch clutches. Replaces C7NN6375H, E0NN6375LA. (Item #: 159168, Ref: E0NN6375LA) $1009.01

Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S) $2.10

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB) $117.00

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Push Rod - For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 7610, 7710, 334, 335, 530A. All with 3 or 4 cylinder Diesel from 1981 to 10/1991. Push Rod is 12.17 inches long. (Item #: 165225, Ref: C5NE6567B) $5.70

Rear Engine Seal Retainer - Used Ford / New Holland engines BSD442, BSD444, BSD444T, BSD666, BSD666T on equipment 1975 and later. The retainer is used with E5NN6701BA crankshaft seal and E9NN6N305AB gasket, sold separately. This part replaces original part numbers E5HN6N306AB, E5HN6N306AC, 81868536 (Item #: 168950, Ref: E5HN6N306AB) $159.00

Ring Gear, Flywheel - This New Starter Flywheel Ring Gear has a 14.634 inside diameter, a 16.245 outside diameter and 162 teeth. It is used on the following gas tractors built 1965 and later: 2000, 230, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 420, 4400, 445, 4500, 4600, 4610, 5000, 530, 531, 532, 535, 540, 545, 550, 5500, 555, 5550, It replaces original part number C5NE6384B. (Item #: 154730, Ref: C5NE6384B) $164.00

Ring Gear, Flywheel - For gas and diesel. Measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA) $39.00

Rocker Arm - Rocker Arm for Exhaust Valve. For 3 -4 and 6 cylinder tractor models, 1965 and later. 2000 3 cylinder, 3000, 4000 3 cylinder, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. Replaces 81804316, C5NE6529A, D5NE6529A (Item #: 178902, Ref: C5NE6529A) $48.00

Rocker Arm - Rocker Arm, for Intake Valve. Replaces D9NN6529AA. For 3 cylinder tractor models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Item #: 186991, Ref: D9NN6529AB) $27.60

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $63.00

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A) $2.80

Engine Pistons and Sleeves

Piston Sleeve, 4.2 Inch Bore - This is a semi-finished straight sleeve (no lip) for 4.2 inch bore engines. It is used when repairing non-sleeved engines, boring and honing required. Inside diameter 105.530mm (4.200 inches). Outside diameter 110.870mm (4.362 inches). Overall height 209.550mm (8.250 inches). Replaces 81815327, 87295246, C5NN6055A (Item #: 160001, Ref: C5NN6055A) $33.00

Exhaust System

Exhaust Extension Pipe, Black Enamel - This Exhaust Extension Pipe is 13-1/2 inches long. If fits between the manifold and muffler. USed with 131545 muffler. Back Enamel Finish. Replaces D0NN5B255C. (Item #: 131546) $27.50

Exhaust Pipe Gasket - This gasket is used with D6NN5246N Exhaust Pipe. (Item #: 124215, Ref: E0NN5C250BA) $2.50

Exhaust Pipe, Vertical - Used with Exhaust Manifold D3NN9430A. For tractor models 2600, 3600, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, (4640 less turbo), 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B. Uses E0NN5C250BA Gasket, sold separately. Replaces 83909902, 86611214, D6NN5246N. (Item #: 101528, Ref: D6NN5246N) $59.00

Muffler - Vertical Round Muffler, Aluminized. This high quality Muffler has Internal Baffles. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter. Dimension A = 29 inches overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 100575, Ref: C7NN5230JM) $42.00

Muffler - Oval muffler, for vertical exhaust, black. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter, 49 inches overall length. For 2000, 230A, 231, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 420, 532. (Item #: 100593, Ref: E4NN5230FA17M) $78.00

Muffler - For 2000, 3000, 2600, 3600, 2610, 3610, 340, 445, 540, 335, 420, 230A. Muffler - Highest Quality. Black Enamel Finish. (S.14518) (Item #: 100593, Ref: E4NN523OFA) $78.00

Muffler, Black - Round muffler, black. This high-quality muffler has internal baffles. Inlet 1-7/8" I.D. Outlet 2" O.D., DIM A = 29" overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 131545, Ref: C7NN5230JM-B) $49.98

Fuel System / Air Intake

Air Cleaner Cover - Twist locks into top of air cleaner. Diameter 6 1/4 inches. For tractor models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND: 230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS/DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS/DIESEL), 445, (515 GAS/DIESEL), 530A, 531, (532 GAS/DIESEL), 545. NOTE: FORD HAD MORE THEN ONE COVER PLEASE COMPARE YOUR TAB DEPTH AND DIAMETER BEFORE ORDERING. (Item #: 113721, Ref: C5NE9661A) $82.00

Air Cleaner Cover Assembly - For tractor models 230, 231, 233, 234, 2600, 2600N, 2600V, 333, 334, 335, 3600, 3600N, 3600V, 3900, 4100, 4600, 515, 530, 531, 532, 5600, 6600, 7600. Replaces D0NN9661B, D1NN9661A, D5NN9661A, D8NN9661BA (Item #: 113722, Ref: D8NN9661AA) $105.00

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Item #: 121925, Ref: T23262) $6.30

Air Cleaner Hose - This Air Cleaner Hose fits 231, 233, 2600, 2600V, 333, 335, 3600, 3600V, 3900, 4600, 4600SU, 5110, 515, 531, 532, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710. The large end diameter is 2 1/2 inches and the small end is 2 inch. It replaces OEM part number D9NN9B640AA. (Item #: 182918, Ref: D9NN9B640AA) $12.40

Air Filter Element, Inner - Outside diameter top is 2-1/8 inches, outside diameter bottom 2-9/16 inches, inside diameter top 3/8 inches, inside diameter bottom 1 7/8 inches, height 10-5/16 inches. Inner Filter fits GAS tractors: (2000, 3000, 4000 all 1/1973>) 2600, 3600, 4600, 2610, 3610, 4610. Industrials: (2110LCG, 3400, 3550, 4110LCG, 4400, 4500 all 1/1973>), 230A, 231, 335, 340A, 420, 445A, 515, 531, 532, 535, 545. DIESELS: (3400, 3500, 3550 all 1/1973>), 335 (up to 5/1976), 420, (515, 531, 532, all up to 5/1976), 535, 550, 6500. Replaces D2NN9R500A515. (Item #: 121321, Ref: E6NN9R500DA) $51.00

Air Filter Element, Outer - Outside diameter 4 1/2 inches, inside diameter 2 1/4 inches, height 10 11/16 inches. Outer Filter fits GAS tractors: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. Industrials: 2110LCG, 230A, 231, 3400, 3500, 3550, 335, 340A, 4110LCG, 4400, 4500, 420, 445A, 515, 531, 532, 535, 545. DIESELS: 3400, 3500, 3550, 335 (up to 6/1976), 420, (515, 531, 532, all up to 5/1976), 535. Replaces 1026131M92, D0NN9B618B, AF492, D0NN9B618B, C5NE9A641A, E6NN9B618AB, 81823386, E6NN9B618AA, C7NN9A641A, C7NN9A641C, D2NN9R500A. (Item #: 121320, Ref: E6NN9B618AA) $22.40

Air Filter, Outer - For tractor models (550, 555 from 1975 to 7/1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4/1976 and later). Measures 11.45 inches long, 5.30 inch outside diameter, 3.03 inch inside diameter. Replaces D5NN9601A, D5NN9601B, D6NN9601A, E6NN9601A, E9NN9601BA, 83908364, 3414560, 0003414560, AZA194, 9583, CR9583, 9583M, P526500, LAF8551 (Item #: 121138, Ref: D6NN9601A) $17.50

Breather Cap - For Dry-Type Air Cleaners on gas tractors (2000, 3000, 4000, all 1965-1975), (2600, 3600, 4600, 231, 335, 515, 531, 532, all 1975-1981). For Oil Bath Cleaners on Diesel Tractors 2000, 3000 except 3500 and 3550, 4000 except 4500, all 1965-1975. For 2600, 3600, 231, 233, 333, all 1975 to 1981. Breather Cap for 2 inch air Intake Pipe. Cap is 6 1/2 inches tall. (Item #: 112384, Ref: C5NN9A660B) $13.90

Carburetor - This New Zenith Style carburetor outperforms the original carbs used on: 2600, 3000, 3400, 3600. New replacement Zenith carburetor. For 3 cylinder 175 CID engine. Replaces OEM# 13916, 13914, C5NE9510C, C5NN9510M, C7NN9510C, C9NN9510B, D3NN9510B, D6NN9510B, D8NN9510BA, D8NN9510C, E1NN9510BA, E1NN9510EA, R4100, R4120, R4120-1, R6863, R7893, R7896, R8553. Center to center on the 2 mounting bolts is 2 11/16 inches. Throttle linkage 3/4 inch from center of ball to center of shaft. (Item #: 184577, Ref: 13914B) $276.00

Carburetor - Zenith carburetor outperforms the original carbs used on: 2600, 3600N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 340, 3400, 3500, 3600, 3600R, 3600V, 3610, 3610N, 3610V, 420. New replacement Zenith carburetor. For 3 cylinder 158 and 175 CID engine. Replaces OEM# C5NE9510C, C5NN9510M, C7NN9510C, C9NN9510B, D3NN9510B, D6NN9510B, D8NN9510BA, D8NN9510C, E1NN9510BA, E1NN9510EA, LIST6852, R3013-3, R4100, R4120, R4120-1, R6863, R7893, R7896, R8553 . Center to center on the 2 mounting bolts is 2 11/16 inches. The throttle linkage 3/4 inch from center of ball to center of shaft. Made in USA, 1 year warranty. (Item #: 100760, Ref: 13914) $564.00

Carburetor Float, Holley - This Carburetor Float is for Holly Carburetors: 2871, 2871-1, 3257, R3210, R3656A, R3657, R3658, R4111, R4111A, R4119, R4119A, R4120, R4120-1, R6852, R6853, R7867, R7896, R8552, R8553, R8554. Tractors: 2000 (3 cylinder), 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3310, 3330, 3600, 3610, 4000 (3 cylinder), 4100, 4110, 4600, 4610, 5000, 5100, 5200, 6600. Industrials: 230A, 231, 335, 340, 420, 445, 530A, 531, 535, 545, 550, 555A, 555B, 3400, 3500, 4400, 4500. Replaces: 81810964, C5NE9550A, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA. (Item #: 108458, Ref: C5NE9550A) $34.00

Carburetor Kit, Basic - Holley carbs. For tractor models 2000, 3000, 4000, Ind. 2110LCG, 3400, 3500, 4110LCG, 4400, 4500, 231, 233, 333, 335, 340, 340A, 420, 445, 515, 531, 532, 540, 540A, 545, 550, 555, 555A, 555B. Replaces CKPN9591A. (Item #: 182790, Ref: CKPN9591A) $39.00

Carburetor Kit, Basic - This Basic Carburetor Kit Includes Gaskets, Needle and Seat, and Diaphragm. It is used on Zenith carburetor numbers 13486, 13912, 13913, 13914, 13915, 13916, 13920, 14997 (Item #: 100744, Ref: Z107) $31.80

Choke Cable - 48.00 inch total length. For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 231, 2110LCG, 335, 3400, 3500, 420, 4110LCG, 4400, 4500, 515, 535. (Item #: 113987, Ref: C5NN9700C) $9.50

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35 -- Industrial: 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 3400, 345C, 345D, 3500, 3550, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 650, 6500. (Item #: 184806, Ref: C5NN9030D) $9.00

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $26.40

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.10

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Ford: 2000, 2100, 2110, 2120, 2300, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210 (Item #: 179631, Ref: D2NN9N090B) $8.00

Fuel Injector - For tractor models 2600, 3600, 4600, 5600, 5700, 6600, 6700, 8600, 8700, TW10, 230A, 231, 234, 334, 335, 340A, 340B, 530A, 531, 540A, 540B D4NN9F593A (Item #: 119903, Ref: D0NN9F593A) $52.00

Fuel Injector - For tractor models 230A, 2310, 234, 2610, 2810, 2910, 334, 335, 3610, 3910, 4110, 4610, 530A, 650, 6500, 7500, 755, 755A, 755B. Uses C5NE9F596A seal kit, not included. Replaces E4NN9F593AA, E4NN9F593AARDS (Item #: 119914, Ref: E4NN9F593AA) $67.00

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Item #: 156291, Ref: C5NE9F596A) $2.10

Fuel Pump - For tractor models (2000, 3000, 4000, 5000 1965 and up), 2100, 2110, 2120, 2150, 2300, 231, 2310, 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 335, 3400, 3600, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4600, 5000, 5100, 515, 5190, 5200, 531, 5340, 5500, 5550, 6600. All with gas engines. Replaces 81805929, C5NE9350A, D5NN9350B, D5NN9350BGV, F2NN9350AA. (Item #: 108321, Ref: F2NN9350AA) $33.00

Fuel Sediment Bowl Assembly - This new Sediment Bowl Assembly is used on Ford Gas Tractors 1965 and later. It replaces original part number D4NN9155A. Replaces 83416255 Connector, C5NE9165D Cover, D4NN9155A Filter Assembly, C5NN9160A Gasket, C5NN9176A Filter, 86508531 Bowl, D4NN9C297A Bail. (Item #: 155996, Ref: D4NN9155A) $48.00

No
Picture
Fuel Sender, Screw Held - For 3-cylinder tractors (1965 and newer): 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610. Industrials: 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 531, 532, 535, 540A, 540B, 545, 545A, 545C, 545D. (Item #: 102189, Ref: 83943961) $59.00

Fuel Shut-Off Cable - Cable Assembly, Fuel Shut-Off, 60 inch long. For Diesel Tractors 2000, 3000, 4000, 5000, 7000, (1965 to 1975); 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 233, 333, 335, 515, (1975 to 1981); 4610, 5610, 6610, 7610, 7710, with quiet cab (1981 to 1991). (Item #: 121221, Ref: E5NN9C331EA) $8.30

Injection Line Set - Used with rotary injection pump. For tractor models: 2310 (1/1/81-2/28/90), 2600, 2600, 2610 (1/1/81-2/28/90), 2610 (V, 1/1/81-2/28/90), 2810 (1/1/81-2/28/90), 2910 (1/1/81-2/28/90), 3600, 3610 (1/1/81-2/28/90), 3610V, 3610 (NO, 1/1/81-2/28/90), 3900 (1/1/75-later), 3910, 4110 (1/1/81-2/28/90), 4600, 4600SU (1/1/75-later), 4610 (1/1/81-2/28/90), 4610 (V, 1/1/81-2/28/90), 4610 (N, NO, 1/1/81-2/28/90), 4610SU (1/1/81-2/28/90). Compatible with Ford Construction and Industrials: 230A (1/1/81-2/28/90), 231 (1/1/75-later), 233 (1/1/75-later), 234 (1/1/81-2/28/90), 333 (1/1/75-later), 334 (1/1/81-2/28/90), 335 (1/1/81-2/28/90), 340, 340A, 340B, 420 (1/1/75-later), 445, 445A, 455 (7/1/87-11/30/88), 515 (1/1/75-later), 530A (1/1/81-2/28/90), 531 (1/1/75-later), 532 (1/1/75-later), 535 (1/1/75-later), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B Replaces E0NN9A555AA, D9NN9A557AA, D9NN9A556AA. (Item #: 162827, Ref: FPL500) $46.00

Injection Pump - For tractor models 3000, 3100, 3330, 3600, 3900, 333, 335, 340, 3400, 3500 Replaces D6NN9A543J, CAV3233F380 (Item #: 117634, Ref: D0NN9A543J) $925.00

Injection Pump Cover Plate - This Cover Plate is used with CAV injection pumps. Replaces Ford OEM nos C7NN9G578A, 81827350, 83903026, 83926998, D2NN9G578A, D4NN9G578A, E0NN9G578AA (Item #: 113720, Ref: E0NN9G578AA) $55.00

Injector Nozzle - For tractor models 333, 335, 340, 340A, 445, 445A, 3600, 3900, 4100, 420, (5600 up to 9/1980). (Item #: 160121, Ref: D4NN9E527A) $32.80

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM part number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $14.00

Manifold Heater - This Thermostart Intake Manifold Heater is used on multiple Ford Diesel Tractors. It replaces original part numbers C5NE9A436A, E1NN9A436AA and 81806046. For Diesel Tractor Models 2000, 2110 LCG, 230A, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 340A, 3500, 3550, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 420, 4400, 445, 4500, 4600, 4610, 5000, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 5500, 555, 5550, 5600, 5610, 5900, 655, 6600, 6610, 6700, 6710, 7000 and 7600. (Item #: 118792, Ref: 3583543M2) $11.50

Precleaner Assembly - For tractor models 7000 10/1971-1974, 7600 and 7700 1975-1981, (2310, 2610, 2810, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A, all 1981-2/1990), (5610, 6610, 6710, 7610, 7710, all 1981-1991), (7810, 7910, 8210, 8530, TW5, all 1982-10/1991). Precleaner Assembly, dry for 3 inch pipe. 10 Inch Diameter. Replaces 82926173, 81821684, C9NN9A660C (Item #: 112379, Ref: C9NN9A660C) $36.00

Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1801, 2000, 231, 2600, 3000, 335, 3600, 4000, 4600, 5000, 515, 531, 532, 6000, 801, 901 Replaces B9NN9A660A, 86555327, B9NN9A667A, and C0NN9A660A. (Item #: 186846, Ref: 101579AS) $85.65

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $9.00

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $85.65

Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Item #: 167626, Ref: C5NN9740A) $8.20

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Fuel Sender - Fuel Sender with gasket, screw held. Used on some Ford Tractors, 1965 and later. Verify part number. Replaces E3NN9A316CA and 83943961. (Item #: 102189, Ref: 83943961) $59.00

Gauge Cluster Assembly - Used in tractors that have Mechanical Tach. For tractor models 230A, 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 340, 340A, 340B, 3430, 3610, 3910, 3930H, 3930N, 3930NO, 4110, 4130NO, 445 DIESEL, 445 GAS, 445A, 450, 455, 4610, 4610N, 4610NO, 4610SU, 4630, 4630NO, 4630O, 4830, 4830N, 4830O, 5030, 5030O, 530A, 540A, 540B, 545A, 5610S, 6610S, 6810S, 7610S. Replaces E5NN10849DA. (Item #: 125559, Ref: 83954555) $185.00

Instrument Cluster - Speedometer moves counter clockwise. Metal Casting. For tractor models 2600, 3600, 4100, 4600, 5600, 6600, 7600 (1975 to 1981) also fits 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, (1981 to 1990), 5610, 5900, 6610, 7610, (1981 to 9-1985), 230A, 234, 334, 335, 530A (1981 to 2-1990). Includes Instrument Stabilizer C7NN10N507A (not used in all applications). Replaces C7NN10849C, E5NN10849BA, D8NN10849TA, D8NN10849TB, D5NN10849A, 83904448, 83927301, 83958741, 83953544, E7NN10849BA (Item #: 103890, Ref: E5NN10849BA) $100.00

Lens, Instrument Cluster, Plastic - Fits 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 450, 455, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5900, 655, 655A, 6600, 6610, 6610S, 7600, 7610, 7610S, 7810, 8010. (Item #: 125556, Ref: 83918700) $36.00

Shaft and Cable Assembly - Shaft and Cable Assembly, Adapter to Tachometer Cable, 4-1/4 inches long. For 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 5600, 5610, 5700, 5910, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. Replaces OEM numbers D3NN17N275A, E9NN17N275AB, F1NN17N275AA, 81834274, 83987694, 87760307. (Item #: 121548, Ref: F1NN17N275AA) $5.20

Tachometer Adapter - This Tachometer Adapter fits the following tractor models: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 450, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5900, 650, 655, 655A, 6600, 6610, 6700, 6710, 750, 755, 755A, 755B, 7600, 7610, 7700, and 7710. Replaces: 87800006, D3NN17N264B, D8NN17N264AA, E3NN17N264AA, E4NN17N264AA, E9NN17N264AA, F1NN17N264AA, F1NN17N264AB and 81873710. (Item #: 125558, Ref: 87800006) $27.10

Temperature Sender - Temperature Sender, Water. The part may come with a spade terminal which might require changing your wire end. 3/8 Inch NPT Thread.Replaces: 81818428, 83904449, 83904448, 81837742, 83911735, 83948391, 8712608, 82028131, 9712608, D8NN10884AA, E1NN10884AA, 2080406, 3917490, 73403367 (Item #: 128314, Ref: D5NN10884A) $10.20

Hitch / Drawbar

Bracket Left Hand - Bracket, Left Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND932B (Item #: 119989, Ref: C7NND932B) $31.00

Bracket Right Hand - Bracket, Right Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND933B (Item #: 119988, Ref: C7NND933B) $30.80

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Item #: 111911, Ref: EC0N660A) $5.20

Leveling Rod Assembly, Left Hand - Left Hand Leveling Arm Assembly. Fits models: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 4000. Includes: C5NNB863A rod, NCA585B fork, and 957E566 knuckle. Adjusts from 21 1/2 inches to 24 1/2 inches. Replaces NCA564B, C5NN564D. (Item #: 118481, Ref: 6N564B) $68.00

Leveling Rod, Left Hand - Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 9N564B, C5NN564B. (Item #: 111007, Ref: 182544M92) $45.00

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.80

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

$Ford 335 Lower Lift Arm R\H (Cat 1\1)$
Lower Lift Arm R/H (Cat 1/1) - Lower Link Lift Arm R/H (Cat 1/1) measures 32 7/8 inches in length, 3 9/16 in width, and 5/8 in thickness. Applicable for 20 0-4000 (4 cyl) 2000, 2100, 2110, 2120, 2150, 230, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3100, 3120, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3600N, 3600V, 3610, 3610N, 3910, 3910N, 4000, 4110, 4110N, 4140, 4600, 4610, 4610N, 530, 531, 600, 601, 700, 701, 800, 801, 900, 901. Replaces 81815827 and E5NN555AA11Z. (Item #: 191080, Ref: C5NN555AN) $44.98

$Ford 335 Lower Link Lift Arm (CAT 1\2)$
Lower Link Lift Arm (CAT 1/2) - Ford Lower Lift Arm R/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401. (Item #: 122628, Ref: E5NN555AA) $112.00

$Ford 335 Lower Link Lift Arm L\H (CAT 1\2)$
Lower Link Lift Arm L/H (CAT 1/2) - Ford Lower Lift Arm L/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402. (Item #: 122627, Ref: E5NN556AA) $113.00

Rod Leveling - Leveling Rod Assembly, left hand, adjustment from 27-1/2 inches to 32 inches. For 230A, 2310, 231, 233, 2600, 2610, 3000, 333, 334, 335, 3600, 3610, 4000, 4600SU, 4610, 530A. (Item #: 115658, Ref: E0NNB484DA) $76.00

Swinging Drawbar Kit - Fits tractors: 2000, 2310, 2600, 2610, 3000, 3600, 3610. INDUSTRIALS: 230A, 231, 233, 2110LCG, 333, 335, 3400, 3500, 420, 530A, 531, 535 (Note, industrials may require C5NNN806B spacers, available through a dealer only. (Item #: 161924, Ref: CFPN820A_) $215.00

Top Link Rocker - This Top Link Rocker is used on 2000, 231, 233, 2600, 333, 335, 3400, 3500, 4110LCG, 531. Replaces C7NN535B, C7NN535C, E0NN535AA, 83923994 (Item #: 154018, Ref: C7NN535C) $58.00

Hydraulic System

Bushing Kit - Cross Shaft bushing kit. Contains 1 bushing, 1 O-Ring, and 1 washer. For tractor models 2000, 3000, 2600, 3600, 2310, 2610, 2910, 3610, 3910, IND 230A, 231, 233, 234, 2110LLG, 333, 334, 335, 340A, 3400, 3500, 4110LLG, 530A, 531. Replaces DBPN531A and 81825128 (Item #: 170951, Ref: DBPN531A) $20.20

Cylinder, Side Link - Side Link Hydraulic Cylinder. (Item #: 178907, Ref: HSL3201) $335.00

Cylinder, Top Link - Top Link Hydraulic Cylinder. (Item #: 167107, Ref: HTL3101) $344.00

Draft Control Handle - This Draft Control Handle is used on many ford tractor and industrial models. It replaces original part numbers D3NNB505B, ESL11003, 81843895. (Item #: 179289, Ref: D3NNB505B) $31.20

Draft Control Plunger - This Draft Control Plunger is for models 2000, 2110LCG, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D. (Item #: 158406, Ref: C5NN541A) $31.40

Draft Control Shaft - This Draft Control Shaft is 8-3/4 inches long. It is used on multiple Ford Models. Replaces original part number D3NNB911B, 81843896, 81843986 (Item #: 180164, Ref: D3NNB911B) $45.80

Fork - Fork, hydraulic lift leveling rod, right hand. Length 14 inches center hole to end, 3/4 inch threads. For tractor models 2000, 230A, 2310, 234, 2610, 2810, 2910, 3000, 334, 335, 3600, 3610, 530A. (Item #: 110971, Ref: E0NN585BA) $30.00

Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3/8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 111565, Ref: HV4902) $89.00

Hydraulic Cover Blocking Plate - Fits 2000, 3000, 3930, 4000, 4100, 4110, 4130, 2600, 3600, 3900, 4600, 4610, 4630, 4830, 5030 INDUSTRIALS: 230A, 231, 233, 234, 333, 334, 335, 530A, 540, 540A, 540B, 545, 545A, 545B, 545C, 545D. (Item #: 158711, Ref: C5NN475B) $42.40

Hydraulic Filter, Steel Mesh - Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3/4 inch tall, 2 1/8 inch Diameter with a 3/4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. YTO C5NNN832B (Item #: 113711, Ref: C5NNN832B) $10.70

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref: C5NNN901A) $9.30

No
Picture
Hydraulic hose Assembly - Hose, 44". (Item #: 179992, Ref: HV4977) $41.20

Hydraulic Lift Arm, Left Hand - This is the Left Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802158, C5NNB921D (Item #: 154979, Ref: C5NNB921D) $50.00

Hydraulic Lift Arm, Right Hand - This is the Right Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802150, C5NNB920D (Item #: 154976, Ref: C5NNB920D) $51.00

Hydraulic Lift Rocker Pin - This pin is used with C7NN535B, C7NN535C and E0NN535AA Top Link Rockers. The pin is number 4 in the image. Used on Ford 3500, 2000, 2100, 2110, 2120, 2150 1/70-12/74, U.K. Only, 330A, 2300, 231, 2310, 233, 2600, 2600N, 2600R, 2600V, 2610, 2610V, 3000, 333, 334, 335, 3600, 3600N, 3600R, 3600V, 3610V, 4000, 4110, 4600SU, 531 (Item #: 189212) $28.50

Hydraulic Lift Shaft - For tractor models (2000, 4000 from 1965 and up), (2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, (340A prior to 5/1983), 3500, 3600, 3910, 4110, 530A, 531. (Item #: 170950, Ref: C5NN544D) $155.00

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $15.80

Hydraulic Pump - This is a new Piston Type Hydraulic Pump with Push In and 3/4 inch screw In lines. It is used on 2600, 3600, 4600, 2310, 2610, 3610, 4610, 230, 231, 335, 340, 340A, 420, 445, 515, 530A, 531, 532, 535, 540, 540A, 545 tractors. Replaces original part number D6NN600A. (Item #: 182967, Ref: D6NN600A) $1000.00

Hydraulic Pump - This is a Gear Type Pump. It will mount to the engine in the same location as a Piston Style Pump, but the hydraulic lines will have to be changed. For tractor models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3/1983, 5610, 6610, 6710, 7610, 7710 1981-9/1985, 7210, 8210 1982-10/1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. (3500, 3350, 4400, 4500, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4200, 4330, 4340, all 1965 to 9/1969 w/ Ind PTO). Uses E4NN911AA gasket, not included. Used with filter D6NNB486A with vertical exhaust or D8NNB486EA with horizontal exhaust. Hydraulic Pump also replaces 83996272, 83996336, E1NN600AA, E1NN600AB, E2NN600AB, C5NN600AA, D3NN600A, D3NN600H, D4NN600B, ESL11276, E1NN600AA-E, E1NN600AB, VPK1014, 81836735, 81844738, 83900640, 83928509, 83996272. YTO E1NN600AB (Item #: 155909) $375.51

Hydraulic Pump Gasket - This gasket is used to mount Engine Mounted Hydraulic Pumps on many Ford Tractors, including E1NN600AB Pump. Replaces original part numbers 83948101, E4NN911AA. (Item #: 162462, Ref: E4NN911AA) $2.00

Hydraulic Pump Hub - For tractor models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. Hub. 5-1/4 inch overall diameter, 4 mounting holes 7/16 inch diameter, smooth type, 3-7/8 inch spacing. 1-9/16 inch relief diameter, 3/4 inch depth. 13 spline center bore, 7/8 inch diameter. This pump has 13 splines and is NOT threaded. Used with 291951, 292222, 7701044 pump shaft. Replaces 86509731, C5NNN879A. Used with 291315 and on some crankshaft pulleys. Measure crankshaft pulley before ordering. (Item #: 112192, Ref: C5NNN879A) $54.00

Hydraulic Pump Mounting Gasket - For Transmission Mounted Hydraulic Pumps on Ford models: 250C, 2810, 2910, 335, 340, 340A, 340B, 345C, 345D, 3910, 3910N, 3910V, 4110, 4110N, 4110V, 420, 445, 450, 455, 455C, 455D, 4610, 4610N, 4610V, 4830, 4830N, 5030, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. This gasket replaces Ford part numbers E7NN915A, D4NN915A, 83961379 (Item #: 156043, Ref: E7NN915A) $11.40

Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Item #: 170934, Ref: C0NN852A) $34.00

Hydraulic Pump Repair Kit - This Comprehensive Hydraulic Pump Repair Kit contains items in image marked with an asterisk; 1 - Wobble Shaft D9NN966AA, 1 - Wobble Shaft Needle Bearing 169024, 1 - Idler Gear Shaft C5NN872A, 2 - Idler Gear Shaft Needle Bearings C5NNN900A, 1 - Wobble Shaft Bearing Plate C0NN859A, 6 9/16 Pistons C5NN615A, 6 5/8 Pistons NCA615C, 6 - Pistons Springs NCA861B, 6 Inlet Springs NCA647B, 6 - Outlet Springs C5NN646A, 12 - Balls 354872S, 6 - Seats C5NN885A, 6 - Cages C0NND844A, 6 Cages C0NND843A, 1 Bearing Cup 141296, 1- Bear Cone 141295, Seals C5NN851A, and Gaskets E4NN911AA, D6NN867A, C0NN869A, 1 Woodruff Key 81797891. Replaces CKPN600A, 81821107, 5A-1306. For Tractors 1965-1983 with Piston style pumps. (Item #: 185394, Ref: S65428) $312.00

Hydraulic Pump Repair Kit - Major repair kit for engine mounted pumps: C5NN600AA, C7NN600Y, C5KNN600AB, C7NN600Z all 1965 and up. D477600C and D6NN600A both 1975 and up. (Item #: 107998, Ref: CKPN600A) $35.00

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref: C0NN858A) $46.50

Lift Cover Gasket - Used of Ford Tractors 1965 and later, this gasket replaces OEM part numbers 957E502, E7NN502AA, C5NN502A, 83963584 (Item #: 113960, Ref: C5NN502A) $3.40

Lift Cylinder Safety Valve - This Lift Cylinder Safety Valve has 3/4 x 16UNF Right Hand Threads. It is used on Ford / New Holland 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TS100, TS90, TW15, TW25, TW35, TW5. Replaces 81838679, D3NN984C, D5NN984A, 83911832 (Item #: 170948, Ref: D5NN984A) $40.50

Position Control Handle - This Position Control Handle is used on many for Tractor and Industrial Models. It replaces original part numbers D3NND943B, ESL11004, 81843895, 81843897 (Item #: 179347, Ref: D3NND943B) $35.30

Selector Valve - The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Item #: 116871, Ref: E0NND960AA) $208.00

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 178924, Ref: HV5902) $199.00

Valve Less Handle - Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 178975, Ref: HV4023) $536.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 180405, Ref: HV4033) $722.00

Lights

No
Picture
Headlight and Cowl Assembly, LH - Comes with H4 Halogen Bulb. For tractor models 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 7610, 230A, 334, 335, 530A. (Item #: 174504, Ref: S.66212) $35.00

Headlight and Cowl Assembly, RH - Comes with H4 Halogen Bulb. For tractor models 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 7610, 230A, 334, 335, 530A. (Item #: 176488, Ref: S.66213) $47.70

Light Switch, Rotary Type - This Rotary Type Light Switch is used on many Ford/New Holland models 1965 and later. It replaces original part numbers C5NN11654A, C5NN11654D, C7NN11654B, C7NN11654C, D5NN11654B, E7NN11654AA, 83959708, D10026500, 83959708, 81818781, 81818408, 83905863. (Item #: 121197, Ref: E7NN11654AA) $13.20

Miscellaneous

Thermostart Plug - Intake Manifold Heater. For tractor models 230A, 234, 250C, 260C, 2610, 2810, 2910, 3430, 345C/D, 3610, 3910, 3930, 4110, 445/A/C/D, 4610, 4630, 545/A/C/D, 5610, 6610, 6710, 7610, 7710, 7810, L783, L785, 3230, 4130AP, 4830, 5030, 5640, 6640, 7010, 7740, 7840, 8010, 8240, 8340, L865, L885, LX865, LX885, 334, 335, 550, 2310N, 530A, 5110, 6810, 8160, 8260, 836, 856. Replaces 80858863, 83933675, 87800843, C5NE9A436A, E1NN9A436AA, 603922 (Item #: 118792, Ref: 3583543M2) $11.50

Oil System

Driveshaft - Intermediate Shaft, Oil Pump Drive. For tractor models 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Item #: 169650, Ref: C7NN6A605A) $12.20

Oil Dipstick - This Dipstick is 7 7/8 inches long. It is used on many Ford agriculture and industrial models, 1975 and later. Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Item #: 113916, Ref: E9NN6750BA) $8.50

Oil Pan - Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 281, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630. Industrial 230, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 3550, 420, 4110LCG, 445, 445A, 4400, 4500, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Cast iron construction. Does not include gasket and plug. (Item #: 140613, Ref: C9NN6675A) $398.00

Oil Pan Drain Plug - This 3/4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Item #: 140610, Ref: C9NN6730B) $3.70

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. Fits models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755A, 755B, 2000, 2110LCG, 2600, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 5030, 8530, 8630, 8730, 8830, 5640, 6640, 7740, 7840, 8240, 8340, 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3400, 3500, 4110LCG, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555E, 655, 655A, 655C, 655D. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Item #: 153774, Ref: D8NN9278BD) $5.90

Oil Pump with screen - Complete Oil Pump Assembly with Lower Screen. For models: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA, E1NN6600DC, E1NN6600DB. (Item #: 113205, Ref: E1NN6600DD) $59.00

$Ford 335 Pump Gear\Shaft Assembly$
Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: TW5, TW15, TW25, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, 230A, 233, 234, 250C, 260C, 333, 334, 335, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B. Replaces E9NN6A820AA, 87800008, C7NN6A820C, D3NN6A820E, 3984954, 81845748, 73345660, 81822957, 81837148, 83984954, 81843777, 81834095, D3NN6A820F, D3NN6A820G, C7NN6A820A, D0NN6A820A, C7NN6A820B, D3NN6A820A, D3NN6A820D, 87764586, 87764587, 81859340, 81844832, 81845749, 81818742, 87763956, D3NN6A820B (Item #: 140555, Ref: E9NN6A820AA) $28.80

PTO / Driveline

Input Shaft Seal - Used with Transmission driven PTOs. It is used am many Ford / New Holland Tractors. Measures I.D. 1.0675 inch, O.D. 2.1940 inch, W. 0.5000 inch. (Metric 28.5 x 55.5 x 12.4mm). Replaces E81GD9, D9NN7R510BA, 83924524, 83924924 (Item #: 173499, Ref: D9NN7R510BA) $4.50

PTO Brake Arm - This PTO Brake Arm is used on 250C, 260C, 2810, 2910, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4400, 445, 445A, 445C, 445D, 4500, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D (Item #: 173002, Ref: C9NNN747A) $23.80

PTO Cap - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Item #: 109510, Ref: 310088) $7.80

PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283) $4.10

PTO Clutch Plate, External Splines - This Disc is used in tractors with Independent PTOs. It measures 5.47 inches Major/ 5.278 inches Minor Outside Diameter, 3.91 inches Inside Diameter, 0.070 inches Width, 54 Teeth. 1P77518A, 83918314, C8AP7B442A, P77573A1, T100680, V32773200 (Item #: 155469, Ref: C8AP7B442A) $5.00

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Item #: 109986, Ref: C5NN747A) $1.00

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $4.50

PTO Seal - This PTO Input Shaft Oil Seal is for models with live or independent PTO. Seal Measures .984 inches inside diameter, 1.496 inches outside diameter and .236 inches in width. For models Dexta, Super Dexta, (2000, 3000 and 4000 all with 6, 7 and 8 speed transmissions), (2610, 3610, 4100, 4110, 4600, 4610 all with 8 speed transmission). Replaces part numbers A-VPH1413 and 81717245. (Item #: 173453, Ref: 957E727A) $4.80

PTO Shaft - Shaft, PTO rear. Length 29-1/2 inches, 6 and 10 spline. For 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3910, 531. Replaces 83955575, C5NNA728A, E5NNA728AA (Item #: 154028, Ref: C5NNA728A) $83.00

PTO Shaft - This PTO Shaft fits multiple Ford Tractors and industrial Models with Independent PTO. PTO shaft is 30.625 inches long, 26 tooth splines. Uses Sleeve E7NN797BA and Seal D9NN703BB (not included). It replaces D8NN725AB, 83937198. (Item #: 163804, Ref: D8NN725AB) $268.00

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Item #: 178129, Ref: E75GE9) $7.00

Seats

Seat Cushion, Black - This Black Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces D1NNA405B, D2NNA405B, D2NNA405BAK, E2NNA405AA99B. (Item #: 101228, Ref: E2NNA405AA99M) $110.00

Seat Cushion, Blue - This Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces C7NNA405R, D0NNA405C, D1NNA405A, D1NNA405B, D2NNA405B, D2NNA405BAK, D8NN400BABB, E2NNA405AA99B, E2NNA405AA99M, E7NN400GA, E7NN420AA. (Item #: 101227, Ref: E2NNA405AA99MBL) $103.00

Sheet Metal / Body Parts

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Item #: 104070, Ref: D5NN16312LR) $117.00

Fender, LH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Ships freight (Item #: 105559, Ref: E5NN16313DA) $244.00

Fender, RH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105558, Ref: D8NN16312ABB) $276.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 and 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104072, Ref: D5NN16312LRS) $190.00

Hood Handle - Handle Assembly, engine hood right hand side. For 2000, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3230, 333, 335, 3430, 3600, 3610, 3900, 3930, 4000, 4110, 4140, 420, 4600, 4610, 4830, 5000, 5030, 515, 531, 532, 535, 5600, 5610, 5910, 6600, 6610, 7000, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C5NN16N644B, D6NN16N644A, 83909243. (Item #: 113917, Ref: D6NN16N644A) $8.20

Hood, LH - Fits 3 cylinder D=diesel tractors (4-1968/1974). No air cleaner hole, no louvers. For tractor models 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, 4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155810, Ref: D3NN16626L) $95.00

Hood Prop Rod - This hood prop rod is 17 1/2 inches and used on 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D. It Replaces original part number C7NN8042A. (Item #: 178161, Ref: C7NN8042A) $9.50

Hood, RH - For tractor models 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, 4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155814, Ref: D3NN16625M) $89.00

Steering

Axle Knee Left Hand - This is a Left Side Axle Knee which is used on Ford 2600, 3600, 4600SU, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 231, 335, 531. It is used with spindles having a 1.464 inch lower bushing diameter. It replaces original part numbers D4NN3007B, E0NN3007BA, 83902613 (Item #: 153972, Ref: E0NN3007BA) $236.80

Axle Knee, Right Hand - This is a Right Side Axle Knee which is used on Ford 2600, 3600, 4600SU, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 231, 335, 531. It is used with spindles having a 1.464 inch lower bushing diameter. It replaces original part numbers D4NN3006B, E0NN3006BA, 83902614. (Item #: 153971, Ref: E0NN3006BA) $249.22

Axle Pin Bushing - This Front Axle Pin Bushing has 2.19 inch outside diameter, 2.05 inch inside diameter, 1.5 inch. Fits models: 230A, 231, 233, 234, 334, 335, 530A, 531, 2000, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4600SU, 4610. Replaces C7NN3153B, 81822712, C7NN3153BGV. (Item #: 153458, Ref: C7NN3153B) $4.20

Axle Pin, Front - Front axle pin, manual or power steering. Outside diameter 1.750 inches, inside diameter 1.125 inches, length 4.960 inches. For tractor models 2000, 3000, 4000 and their variant. (Item #: 151913, Ref: C5NN3127B) $32.00

Axle Support - Front Axle Center Support. For tractor models 2000, 2100, 2110, 230A, 231, 234, 2600, 2610, 2910, 3000, 3100, 333, 334, 335, 3600, 3900, 3910, 4100, 4110, 4140, 4600SU, 530A, 531. Item weighs 52 lbs. (Item #: 111993, Ref: C7NN3010F) $191.00

Bearing, Upper - This is the Upper Bearing used with D9NN3N748AA Power Steering Adapter. FORD 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981 to 9/1984), 3400, 231, 335, 531, 532 Replaces C5NN3N657A, 168109, B2012, BA2012. (Item #: 179317, Ref: C5NN3N657A) $12.80

Drag Link End - End, Rear, Right Hand, 29.625 inches to center of post, for Drag Link with Power Steering. For 2000, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340 (All 1/65 - 12/74), 4600, 4610 (All 10/84 - later). Compatible with Ford Construction and Industrial(s) 230A, 231, 234, 334, 335, 530, 531. (Item #: 104591, Ref: C5NN3307G) $100.00

Drag Link End, Front - A= 4.00 inch, B= 13/16 inch, 16 left hand thread. For tractor models: 3000, 335, 3400, 4000, 4410, 532. (Item #: 104593, Ref: C5NN3A300C) $25.40

Drag Link End LH - For tractor models 335, 3000, 3400. ALL with Manual and Power Steering with Non Adjustable Front Axle. Tractor 532, 4410 with Power Steering and Non Adjustable Front Axle. 1" X 16 RH Thread, Length 34.125 Center to End. TRACTOR 4000 1965> with Power Steering and Non Adjustable Front Axle. Replaces OEM part number 81812358. (Item #: 125318, Ref: C5NN3308F) $189.00

Drag Link End, Rear, RH - A= 32.00 inches, B= 1.0 inch with 1.0 inch threads. For tractor models: 3000, 335, 3400, (4000 1965 and up), 4410, 532. (Item #: 104592, Ref: C5NN3307H) $269.00

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $10.90

O-Ring - O-Ring. For Power Steering Valve Assembly. 2000, 3000, 4000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU 1/1981-9/1984, 3400, 231, 335, 531, 532 Replaces 87150S94, 1751687M1. (Item #: 178148, Ref: 87150S94) $1.70

Power Steering Cylinder - Power Steering Cylinder with 5/8 inch diameter rod, 1/2 inch diameter threaded outer end. For 335, 3400, 4110, 532, 2000 Industrial, 4000 Industrial. Uses CAPN3300A Rod end. Replaces, C5NN3A739G, C5NN3C578B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 127590, Ref: C5NN3A739G) $251.00

Power Steering Cylinder - This Power Steering Cylinder has 5/8 inch diameter rod, 7/16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Rod end ball joint sold separately as part number C5NN3A302B. Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Item #: 121885, Ref: D4NN3A540A) $225.00

Power Steering Cylinder Ball End - This Power Steering Cylinder end is used with C5NN3A739G. It fits a cylinder rod with 0.500 inch number 20 fine thread. (Item #: 104712, Ref: CAPN3300A) $19.60

Power Steering Cylinder Repair Kit - For tractor models 2000, 230A, 231, 234, 3000, 335, 3600, 4600, 531, 601, 801. (Item #: 115362, Ref: E2NN3A540SK) $42.30

Power Steering Cylinder Seal Kit - For original equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. Replaces 87045114, CAPN3301B. Note, this kit may arrive with more parts than shown. These other parts are used on non-tractor applications and can be disregarded. (Item #: 155447, Ref: CAPN3301B) $21.90

Power Steering Filter Kit - Power Steering Filter - Power Steering Filter for Pump Reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Replaces 81818748, 84536381, 83936985, 83923728, EDPN3K758A, E0NN3K58AA, E0NN3K758AA, EDPN3K58A, K964924, K964931, K964954, 1004, CR1004, CR665, 665, 84419022, K262979, K964954. (Item #: 113433, Ref: EDPN3K758A) $11.20

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $285.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $182.80

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $12.60

Power Steering Shaft and Ball Nut Assembly After 1964 - Fits 2000, 3000, 4000SU, 2600, 3600, 4100, 4600SU, (2310, 2610, 2910, 3610, 3910, 4110, 4610SU ALL UP TO 9/1984), INDUSTRIALS: 230A, 231, 234, 2110LCG, 334, 335, 3400, 4110LCG, (530A UP TO 9/1984), 531, 532. 26 9/16 inches long. (Item #: 161863, Ref: D6NN3A710A) $289.00

Power Steering Valve Assembly - For tractor models 2000, 3000, 4000SU, 2600, 3600, 3900, 4100, 4600SU, (2310, 2610, 2910, 3610, 4110, 4610SU >9/1984), 2110LCG, 3400, 230A, (231 > 9/1984), 334, 335, 530A, 531, 532. NOTE: If your old valve is 6 plunger, 3 springs, this is an improved version with 8 plungers and 4 springs. YOU MUST remove the check valve from old steering unit with a straight screwdriver and install in the new valve. (Item #: 178679, Ref: C5NN3A730B) $570.00

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Seal, Lower - This is the Lower Seal used with D9NN3N748AA Adapter. Measures 1 3.4 inches outside diameter and 1 3/16 inches inside diameter. For models 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532. Replaces 86531349, 81803245, C5NN3N739A. (Item #: 178159, Ref: C5NN3N739A) $17.00

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.10

Sector Shaft Seal - This Sector Shaft Seal measures 1.125 inches inside diameter, 1.5 inches outside diameter, 0.245 inches Thick. It is used on some of the following 2000, 3000, 4000SU, 2600, 3600, 4600SU, 3400, 231, 335, 531, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU. Verify measurements or OEM number before ordering. More than one size was used. Replaces D6NN3C615A, 83909346 (Item #: 170128, Ref: D6NN3C615A) $8.90

No
Picture
Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Measures 1.352 inch inside diameter, 1.474 inch outside diameter and 1.490 inch length. Also replaces 81717392, 83928345 and 957E3110B. (Item #: 100632, Ref: NCA3110A) $4.40

Spindle Bushing, Bearing and Seal Kit - Contains 2 2N3109 (1 1/4 inch X 1 3/8 inch X 1 1/2 inch) Bushing, 2 C5NN3110B (1 1/2 inch X 1 5/8 inch X 1 1/2 inch) Bushing, 2 C5NN3A299A (1 1/2 inch ID X 2 1/4 inch outside diameter), Thrust Bearings, 2 C5NN3125A (1 1/8 inch X 1 5/8 inch X 1/4 inch) Dust Seal. (Item #: 104567, Ref: SBBSKIT04) $34.00

Spindle - LH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104535, Ref: E9NN3106BA) $260.00

Spindle, LH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104539, Ref: C5NN3106E) $299.00

Spindle Nut - Fits on front spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle - RH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104534, Ref: E9NN3105BA) $268.00

Spindle, RH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104538, Ref: C5NN3105F) $270.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Item #: 104731, Ref: 310799) $38.00

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Box Drop Arm - This Steering Box Drop (Pitman) Arm is used on many Ford Agricultural and Industrial models built 1965 and later. It replaces original part numbers 81803156, C5NN3590F. Verify part numbers before ordering. (Item #: 165024, Ref: C5NN3590F) $39.00

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Item #: 179603, Ref: 8N3595KIT) $23.70

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with power or manual steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.20

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12/1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. (Item #: 124154, Ref: 8N33581) $3.40

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $46.00

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $56.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Wheels

Dual Wheel Adapter - Used to double up rear rims and tires, this adapter has male and female 5/8 inch UNF threads. Verify threads before ordering. (Item #: 173352, Ref: 1863857M1) $6.00

$Ford 335 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $63.00

Front Hub Kit - Used on many Ford models, 1955 and later, this Front Hub Kit contains 1 of 957E1139 dust cap, 1 of EHPN1200C wheel bearing kit, 6 of C5NN1012B wheel nuts, 6 of C5NN1107F wheel studs, and 1 of C9NN1104E hub. Verify part numbers. Many of the models listed used more than one front hup configuration. Ford 2000, 2100, 2120, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3055, 3230, 334, 335, 3600, 3610, 3610V, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4410SU, 4600, 4600NO, 4600O, 4600SU, 4610, 4610N, 4610NO, 4610O, 4610SU, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 5030, 600, 601, 800, 801 (Item #: 113373, Ref: C9NN1104EKIT) $83.00

Front Rim - Heavy Duty - Front Rim with weight holes. 5.5 inch x 16 inch, 3300 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot. For 7.5 inch x 16 inch tires. Additional $25 shipping due to size and weight. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Front Wheel Bearing Kit - Front Wheel Bearing. For tractor models 230, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4600SU, 4610, 4610N, 4610SU, 4630, 4630N, 4830, 5030, 530, 530A, 532. Fits hub C9NN1104E. Contains one each: Bearing LM48548-BP, Cup LM48510-BP, Bearing LM11949-BP, Cup LM11910-BP, Seal 310195. FW94WS (Item #: 100655, Ref: EHPN1200C) $18.20

Front Wheel Bearing Kit - For tractor models (5000, 7000 1972 and up with 8 x 16 wheel), 8000, 8600, 8700, 9000, 9600, 9700, (TW10, TW20, TW30 less heavy duty), (5610, 6610, 6710, 7610, 7710, 10/1989 and up heavy duty axle), 3400, 3550, 4400, 4500, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 535, 540, 540A, 540B, 545, 545A. NOTE: check bearing and cup numbers before ordering. Replaces 8L4221/312518, 25590-25520 for Inner Bearing and Cup, 312520/312548, 02474/02420 Outer Bearing and Cup, E4NN1190AA Seal. (Item #: 100657, Ref: S.67455) $46.00

Hub Cap -with hole for grease fitting - For tractor models 2000, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, Dexta, Super Dexta. (Item #: 100661, Ref: 957E1139) $6.30

Hub Front - This Front Hub comes with 6 studs, 6 nuts and Hub Cap (not shown). For tractor models 2000, 230, 230A, 2310, 234, 2600, 2610, 2610V, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4610, 4610N, 4630, 4630N, 4830, 4830N, 5030, 530, 530A, 601, 801, Dexta, Super Dexta. Replaces C9NN1104D, C9NN1104E, 81823161. It is important to verify OEM numbers. Many of the models listed used more than one hub. Uses EHPN1200C wheel bearing set. (Item #: 184919, Ref: C9NN1104E) $58.00

Lug Nut, Rear Wheel - 5/8-18 (UNF) Thread. Uses a 1 1/16 inch wrench. Replaces C5NN1120F, 8N1134, 881162M2. (Item #: 109991, Ref: 8N1134) $1.90

Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H) $3.80

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $23.50

Rear Wheel Bolt - This Rear Wheel Bolt is used from rear axle to center disc. 5/8 inch-18 thread (UNF) x 2-3/16 inch Use with nut 8N1134. Used on tractors 1965 and later. Verify measurements and part numbers before ordering. Replaces C5NN1117D, C5NN1117K, C5NN1117R, VPH6506, VPH6534, 184272M1, 81815835, 893017M1, 98A625 (Item #: 108655, Ref: C5NN1117R) $2.88

Rear Wheel Center - This disc is used on multiple Ford models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces Ford OEM numbers D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B. (Item #: 149804, Ref: D9NN1036CA) $225.00

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E) $3.50

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces D9NN1036CA, D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B, C0NN1050F, NCA1020B, 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $635.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.40

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $7.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 335 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$Ford 335 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 335 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Ford 335 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford 335 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford 335 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $6.98

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 9N5182) $44.30

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.50

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $19.98

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $119.41

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.90

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $31.40

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $760.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $585.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $71.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $29.70

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $273.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.60

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $56.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.40

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.90

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.20

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $51.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $51.00

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $36.10

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $16.50

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $106.00