FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 4000 Tractor Parts

[Categories] [All Ford Models] [Print]

Accessories / Supplies

Engine Block Heater - Thread in - This is a 400 watt thread in Engine Block Heater. It is used in some Ford Tractors, 1965-2/1969. Make sure Core Plug can be removed before ordering. (Item #: 178928, Ref: D8NN8B152AB) $60.00

Brakes

Brake Actuator Assembly, 8 - For tractor models 2810, 2910, 335, 340, 340A, 340B, 3900, 3910, 4000, 4100, 4110, 420, 4400, 445, 445A, 450, 4600, 4610, 515, 532, 540, 540A, 540B, 545, 545A. (Item #: 128275, Ref: D5NN2N317A) $99.00

Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Item #: 125733, Ref: H2092) $8.90

Brake Anchor Pin Retainer, Pack of 2 - This brake anchor pin retainer is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964) (Item #: 192534, Ref: NCA22286A) $16.30

Brake Backing Plate - Fits the following, all built after December 1966: 2110, 2120, 2310, 2600N, 2610, 2810, 2910, 3100, 3120, 3190, 3610, 3910, 4000, 4110, 4600, 4610, 2000, 3000, 4110, 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 230A, 234, 334, 530A. Replaces 81815610, C5NN2212D (Item #: 105507, Ref: C5NN2212D) $165.00

Brake Back Plate Dust Seal - This brake back plate dust seal is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Item #: 185115, Ref: NCA2217A) $9.50

Brake Camshaft Hole Cover Spring - This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Item #: 178191, Ref: 8N2322) $4.30

Brake Cross Shaft Bushing - Outside diameter 1 1/4 inches, inside diameter 1 1/8 inches, length 1 inch. Fits 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500. (Item #: 151822, Ref: C5NN2N477A) $5.70

Brake Disc - Used in late production, this disc has a 1-9/32 wide facing. This disc is 8.070 inches outside diameter, 2.086 inches inside diameter with 22 splines. Replaces Ford part numbers 86529646, E9NN2N097AA, 83983209, E9NN2A097AA (Item #: 105497, Ref: E9NN2A097AA) $29.90

Brake Disc - For 3550, 4000, 4200, 4500. All 1965-1975. Friction Brake Disc for Wet Brakes. 8 inch diameter, 22 Spline. (Item #: 105496, Ref: C5NN2A097B) $25.90

Brake Drum - ***USE PART NUMBER NCA1126A *** For tractor models 2000, 4000, 4110 with L/Differential Lock 1965 thru 3/1968. Also for 600, 601, 700, 701, 800, 801, 900, 901 all after 1954. AN ADDITIONAL $12 shipping will be added to your order due to weight of item. (Item #: 105493, Ref: 86533415) $115.00

Brake Drum - This cast iron brake drum is for tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10/1965). Replaces 86533415, NCA1126A. (Item #: 105493, Ref: NCA1126A) $115.00

Brake Pedal Shaft - 18.46 inches in length. For tractor models 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. Brake pedal return spring E1NN2472BA and bushing C5NN2N477A are available separately. (Item #: 165726, Ref: D9NN2N337FA) $134.00

Brake Repair Kit - This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. Replaces: (4) Spring Clip: 6H2066, (1) Adjuster Socket: 8N2048, (1) Adjuster Nut: 8N2223, (1) Adjuster Screw: H2041, (1) Felt: NCA2217A, (2) Collar : NCA22218A, (2) Retainer Pin: NCA22276A, (2) Clip: NCA22286A, NCA2250, (1) Spring: NCA2296B, (2) Pins: NCA2333A, (2) Spring: NCA2204A, NCA22275A, NCA22219A (Item #: 105515, Ref: NCA2250) $48.00

Brake Rod Seal - For tractor models 3000, 4000, 5000, 7000, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2810, 2910, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, (5640, 6640, 7740, 7840, 8240, 8340 with 8 x 2 or 16 x 4 transmission), 250C, 260C, 335, 340, 340A, 340B. Replaces E7NN2N336A, 85999093. (Item #: 105644, Ref: C5NN2N336A) $3.70

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Item #: 150914, Ref: D9NN2N289AA) $3.30

Brake Shoe Adjusting Screw Spring - Must order 2. Price is for each. This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Item #: 182025, Ref: NCA22219A) $8.50

Brake Shoe Anchor Pin - This brake shoe anchor pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185113, Ref: NCA2333A) $4.60

Brake Shoe Anchor Pin Collar - 1 inch outside diameter, 3/4 inch inside diameter, 9/16 inches wide. This brake shoe anchor pin collar is for tractor models: 501, 600, 601, 700, 701, 800, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185533, Ref: NCA22218A) $1.80

Brake Shoe Hold Down Spring Pin - Priced for 1, must order 2 - This brake shoe hold down spring pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185118, Ref: NCA22276A) $1.20

Brake Shoe Retracting Spring - This brake shoe retracting spring is for tractor models 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Item #: 114882, Ref: NCA2296B) $17.10

No
Picture
Brake Shoe Return Spring - For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (all 4 cylinder 1955-'64), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NCA2204A, (Item #: 182026) $6.40

Brake Shoe Return Spring, RH Brake - This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Item #: 178084, Ref: NCA2204A) $6.80

Brake Shoe with Lining, Pack of 2 Shoes - This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 to 1964). (Item #: 105488, Ref: NCA2218B) $42.00

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Hand Brake Disc - Diameter 4 inches, 1-1/4 inch hub, 23 splines. Also replaces: D5NN2N625A and C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 and newer - UK), (2000, 3000, 4000 all from Jan/1972 and newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. Replaces C5NN2N625B, D5NN2N625A, E9NN2N625AB, 83906199, 81867258 (Item #: 105495, Ref: E9NN2N625AB) $42.50

Hand Brake Repair Kit - This Hand Brake Repair Kit contains Rod. Knob, Pawl and Spring. Replaces 81816243, C7NN2N606B, C7NN2N616D, C5NN2N615B, 81708853, E0A2744, 81819533, 81819534, 81876606 (Item #: 183910, Ref: S.66303) $16.70

Intermediate Steel Disc - Intermediate Steel Disc, 8 inch diameter. For 340, 3550, 3900, 3910, 4000, 4100, 4110, 420, 4200, 445, 4500, 4600, 4610, 515, 532, 535, 540, 545, 550, 5500, 555, 5550, 650, 6500, 750, 7500. (Item #: 105650, Ref: C5NN2N315B) $7.40

Spring - Spring. Rear Wheel Brake Disc Return. Tractors: 3550, 4000 (except 4110), 5000, 7000 (1965-1975), 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 420, 515, 532, 535 (1975-1981), 2810, 2910, 3910, 4110, 4610, 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210 (1981-10/1991), 3230, 3430, 3930, 4130, 4630 (3/1990 and up), 5640, 6640, 7740, 7840, 8330 (with Mechanical Brakes) (11/1991 and up), 5610S, 6610S, 7610S, 7810S (1/1994 and up). (Item #: 124547, Ref: C5NN2N320A) $2.00

Clutch

No
Picture
Clutch Alignment Tool - For a duel clutch with 1 7/8 Inch 29 spline and a 1 inch with 10 splines. Verify measurements to ensure you order correct tool. Used on models 2000 series, 3000 series, 3600 series, 3610 series, 3910 series, 4000 series, 5000 series, 6000 series, all some agricultural and construction models. (Item #: 122255, Ref: 1112-5805) $22.70

Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7/8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Item #: 122258, Ref: AG15) $24.80

Clutch Alignment Tool - .655" x 15 Spline - For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 840, 850, 851, 900, 901, 941, 950, 951, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 5010, Compatible with Ford Construction and industrial models 1801, 1821, 1841, Tool For 1" 15 Spline Disc Using .655" ID Pilot Bearing, (Item #: 119884) $11.50

Clutch Disc - This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3/8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Item #: 113378, Ref: NCA7550A) $77.00

Clutch Disc - For tractor models Dexta, Super Dexta, 3610, 2810, 4600, 4100, 3400, 2100, 335, 2910, 3100, 233, 3000, 3910, 2110, 4140, 4000, 4500, 4610, 2000, 3600, 2310, 4400, 231, 3500, 2300, 2610, 4110. 11 inch disc, 1 inch X 15 spline. (19528S) (Item #: 182811, Ref: F0NN7550CA) $102.00

No
Picture
Clutch Disc - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 4000, 4100, 4110, 4610, Replaces Ford OEM number C5NN7550AB, C7NN7550C, C7NN7550V, E8NN7550BA, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Spline: 15, Clutch Center: Rigid, Clutch Type: Woven, For Clutch Disc with Center Springs use Item #: 122241, (Item #: 135039) $83.00

Clutch Disc - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NCA7550A, 313299, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 169785) $63.00

Clutch Disc, 10 inch - New, Organic, Spring Loaded, 15 Spline, 1 inch Hub. For tractor models 1801, 1821, 1841, (2000 4 cylinder), 2031, 2111, (2130, 2131 1958 and up), (4000 1962-1964 4 cylinder single clutch), 4031, 501, (600 single clutch), 601, 700, 701, 800, (900 single clutch), 901. Replaces E8NN7550FA, NDA7550B (Item #: 130151, Ref: NDA7550B) $75.00

Clutch Disc, 11 inch - Torsion Dampened, Organic, 1 inch Spline Diameter, 10 Spline. For tractor models 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 333, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4200, 4400, 4410, 4600. (Item #: 130081, Ref: 328015716) $80.00

Clutch Disc, 11 inch - 1 inch Spline Diameter, 10 Spline, Organic, Spring Loaded. For tractor models (2000, 2100, 2110 with Independent PTO), (2120, 2150 with 3 cylinder and Independent PTO), (3610 from 10/1981 to 12/1984 with Dual Clutch), (4000 with 3 cylinder and Independent PTO from 1965 to 9/1969 or 1965 to 9/1975 with Dual Clutch), (4100, 4200 from 1965 to 9/1969 with Independent PTO). (Item #: 130081, Ref: E5NN7550BB-RO) $80.00

Clutch Disc, 11 Inch - 10-Spline, 1 inch Hub, Button/Pad Type Facing. For tractor models 2000, 3000, 4000, 4110. (Item #: 112593, Ref: C7NN7550AC) $94.00

Clutch Disc, 11 Inch - 10-Spline, 1 inch Hub, Woven Facing. For 2000, 2600, 2610, 3000, 3600, 3610, 3900, 4000, 4100, 4110, 4600. Replaces 82006626, 87295808, D1NN7550A, E5NN7550BA, E5NN7550BB. (Item #: 173219, Ref: D1NN7550A) $87.00

Clutch Disc, 11 Inch - This is a Rigid Disc, no Springs. It is 11 inch, 15 Spline, 1 inch Hub, Rigid Disc, Fiber type material. Replaces E8NN7550BA, C7NN7550V, 328024710, 3280247101. (Item #: 122241, Ref: 328024710) $73.00

Clutch Disc, 9 inch - Clutch Disc: 9 inch Organic, Spring Loaded, 15 Splines, 1 inch Hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Item #: 130147, Ref: E8NN7550GA) $80.00

Clutch Disc, Remanufactured - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206192) $86.01

Clutch Disc, Remanufactured - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206193) $86.01

Clutch Disc, Remanufactured, 86640494, C7NN7550AC - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3400, 3500, 4000, 4100, 4200, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 530, 531, Replaces Ford OEM number 86640494, C7NN7550AC, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 3 Reg Pads, (Item #: 206149) $79.01

Clutch Disc, Remanufactured, C7NN7550AD - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3500, 4000, 4100, 4200, Compatible with Ford Construction and industrial models 230A, 231, 233, 334, 335, 530, 531, Replaces Ford OEM number C7NN7550AD, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206150) $125.50

Clutch Disc, Remanufactured, C7NN7550V, C7NN7550AA, E8NN7550BA - For Ford tractor models 4000, 4100, 4110, 4140, 4200, 4330, 4400, 4410, Replaces Ford OEM number C7NN7550V, C7NN7550AA, E8NN7550BA, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206173) $117.00

Clutch Disc, Remanufactured, D1NN7550A - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310 (3/82-12/83), 2600, 2610 (1/81-4/83), 2610 (V 1/81-2/90), 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610 (& NO 8/81-4/83), 3910, 4000, 4100, 4110 (O 1/81-2/90), 4140, 4600, 4610, Compatible with Ford Construction and industrial models 230A (1/81-4/83), 231, 234 (1/75-4/83), 334 (1/81-4/83), 345, 445, 530A, 530A (1/81-4/83), 531, 545, 4140, Replaces Ford OEM number D1NN7550A, E3NN7550AA, E5NN7550BA, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 206148, (Item #: 203393) $97.00

Clutch Disc, Remanufactured, D8NN7550FA, 82006019 - For Ford tractor models Dexta, Super Dexta, 600, 601, 800, 801, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number D8NN7550FA, F0NN7550FA, E8NN7550GA, Replaces New Holland OEM number 82006019, 86640504, 86640503, 960E7550, Clutch Size: 9", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Springs, Clutch Type: Woven, For a New version of this sku use Item #: 130147, (Item #: 204475) $75.50

Clutch Disc, Remanufactured, E8NN7550BA, C5NN7550AB, C7NN7550C, C7NN7550V - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3400, 4000, 4100, 4110, 4610, Replaces Ford OEM number E8NN7550BA, C5NN7550AB, C7NN7550C, C7NN7550V, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206167) $145.01

Clutch Disc, Remanufactured, E8NN7550BA, C5NN7550AB, C7NN7550C, C7NN7550V - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3400, 4000, 4100, 4110, 4600, Replaces Ford OEM number E8NN7550BA, C5NN7550AB, C7NN7550C, C7NN7550V, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206172) $94.01

Clutch Disc, Remanufactured, FC750AAHD6, C7NN7550AA - For Ford tractor models 4000 (1965 - 9/1969), 4100 (1965 - 9/1969), 4110 (1965 - 9/1969), 4140 (1965 - 9/1969), 4200 (1965 - 9/1969), 4330 (1965 - 9/1969), Replaces Ford OEM number FC750AAHD6, C7NN7550AA, Clutch Size: 11", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206174) $164.01

Clutch Disc, Remanufactured, NDA7550B - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NDA7550B, Clutch Size: 10", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206191) $88.50

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Item #: 178203, Ref: 352581S8) $2.10

Clutch Kit - This new double clutch kit contains a new 11 inch, 15 Spline Rigid Drive Disc E8NN7550BA. A new 11 inch, 29 Spline Double Pressure Plate D8NN7502AA. Pilot Bearing C5NN7600A and Release Bearing 83914247. Includes Pilot Tool. For tractor models (2000, 2100, 2110, 2310 3 cylinder dual clutch), 2120, 2150, 231, 234, 530A, 531, (230A, 233, 333 dual clutch), (2310, 2600, 2600N, 2610 1981-Dec 1984 dual clutch), (3000, 3100, 3400, 4000, 4110 1965-Sept 1975 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330 Jan 1965-Dec 1974), 3600 Oct 1975 and up dual clutch, 3610 Oct 1981-Dec 1984 dual clutch. (Item #: 112326, Ref: D8NN7502AA) $503.00

Clutch Kit - This new dual stage, 9 inch clutch kit contains a 9 inch, 15 Spline Drive Disc with 29 Spline Double Pressure Plate Assembly (311435). Includes Pilot Bearing (C5NN7600A) and Release Bearing (83914247). The pressure plate assembly is larger than the 9 inch captive discs. Note: Pilot Tool is not included and not needed in this kit. For live PTO Double Clutch Models (1955 to 1964). This clutch kit is used on tractor models: 600, 700, 800, 900, 2000 4 cylinder, 4000 4 cylinder, Dexta, Super Dexta. (Item #: 112330, Ref: 311435K_) $440.00

Clutch Kit - This new IPTO clutch kit contains a new 11 inch, 15 spline rigid drive disc (E8NN7550BA), a new 11 inch, 29 spline IPTO pressure plate assembly (C5NN7563U), a new pilot bearing (C5NN7600A), new release bearing (83914247), and clutch alignment tool. For tractors 4000 Series 3 Cyl 65-74, 4100, 4140, 4200, 4600, 4600SU. (Item #: 119876, Ref: C5NN7563UKIT15) $311.00

Clutch Kit - For Ford tractor models 4000, 4100, 4200, 4600, Compatible with Ford Construction and industrial models 4140, Replaces Ford OEM number C5NN7563U, E8NN7550BA, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 15, Clutch Center: Solid, Clutch Type: Woven, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-7/8", Pressure Plate Splines: 29, Pressure Plate Type: Single Stage, For Pressure Plate use Item #: 122258, (Item #: 119862) $310.00

Clutch Kit - For Ford tractor models 2000, 2100, 2110, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 4000, 4100, Compatible with Ford Construction and industrial models 4140, Replaces Ford OEM number C5NN7563V, E8NN7550BA, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 15, Clutch Center: Rigid, Clutch Type: Woven, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, (Item #: 119863) $316.00

Clutch Kit - For Ford tractor models 4000, 4100, 4200, 4600, Compatible with Ford Construction and industrial models 4140, Replaces Ford OEM number C5NN7563U, C7NN7550AC, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: 3 Pad, Triangular, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-7/8", Pressure Plate Splines: 29, For Pressure Plate use Item #: 122255, (Item #: 119866) $320.00

No
Picture
Clutch Kit - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4410, 4600, 4610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 531, 3550, 4140, Replaces Ford OEM number 82006626, 86634451, D8NN7502AA, D8NN7502BA, FD11P10RD, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: Woven, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 21, Pressure Plate Hub Diameter: 1-7/8", Pressure Plate Splines: 29, Pressure Plate Type: Dual Stage, Flywheel Step 1.750", For Clutch Disc use Item #: 122255, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119867) $470.00

No
Picture
Clutch Kit - For Ford tractor models 4000, 4100, 4110, 4140, 4200, 4330, 4400, 4410, Replaces Ford OEM number C5NN7563U, Kit Includes:, Pressure Plate Assembly, Lever Type: Plate Size 11", 4 Levers, 12 Springs, Hub/Spline 1-7/8" x 29, Flywheel Step - Flat, Single Stage, Clutch Disc, Woven: OD 11" / Hub Size 1" / Splines 15, Pilot Bearing - ID .66893" / OD 1.5748" / Thickness 1.5748", Release Bearing - ID 2.500" / OD 4.154" / Thickness .865", Alignment Tool - Large Spline 1-7/8" - 29T, Small Spline 1" - 15T, Pilot Diameter - 0.670, (Item #: 169641) $317.00

Clutch Kit, 10 Inch, Single Clutch - Kit contains new 10" pressure plate assembly (8-springs), NEW 10" DISC (15 spline, 1" hub), release bearing, pilot bearing. For the following tractors with 4 or 5 speed transmission 1953-1964): 600, 620, 630, 640, 650, 601, 611, 621, 631, 641, 651, 700, 740, 750, 701, 741, 800, 820, 840, 801, 811, 821, 841, 851, 900, 950, 901, 941, 951, 2000, 4000. (Item #: 119868, Ref: NDA7563ANC) $170.00

Clutch Kit, 10 Inch, Single Clutch - This 10 inch Single Clutch Kit has a 10 inch 15 Spline on a 1 inch hub Spring Drive Disc E8NN7550FA, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool (not shown). This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900, 1841, 2000 4 cylinder, 4000 4 cylinder. (Item #: 119868, Ref: NDA7563AK) $170.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11 inch 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1 inch by 10 spline and 1-7/8 inch by 29 spline pilot tool. (Item #: 192660, Ref: 1112-6113) $338.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch - 10 spline rigid drive disc with 1 inch center (82006626), 11 inch - 29 spline IPTO pressure plate (C5NN7563U) with 8 bolt mount pattern, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Replaces 82006626, C5NN7563U, E5NN7550BB. (Item #: 119880, Ref: 1112-6067) $352.00

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Item #: 119878, Ref: FC563ZNKIT) $339.00

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Item #: 121833, Ref: 8N7563K) $115.00

Clutch Kit, Remanufactured - For Ford tractor models Dexta, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Clutch Diameter - 9", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Spring or Solid, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 6, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-7/8", Pressure Plate Splines - 29, (Item #: 202041) $470.01

Clutch Pedal Bushing - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610, 7810S, 8030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 532, 535, 540, 540B, 545, 545A, 545C, 545D, Replaces Ford OEM number C5NN7A578A, 81805392, C5N7A578A, (Item #: 169656) $6.80

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Item #: 135020, Ref: D8NN7563DB) $186.00

No
Picture
Clutch Release Bearing Hub, Used - For Ford tractor models NAA, 2N, 8N, 9N, 2000 (1/1962-12/1964 with 4 cyl engine), 2031, 2111, 2120 (1/1963-12/1964 with 4 cyl engine), 2131, 4000 (1/1962-12/1964 with 4 cyl engine), 4031, 4120, 4121, 4130 (3/1963-12/1964), 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, Replaces Ford OEM number 9N7561, For a new version of this item use Item #: 163512, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436337) $23.01

Clutch Release Fork - This Clutch Release Fork is used in Ford Tractors with 5 speed transmissions and live PTO. 1958-1964 (Item #: 179283, Ref: 311649) $90.00

Clutch Release Fork, Used - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 4040, 4140, Replaces Ford OEM number 487515, For a new version of this item use Item #: 184395, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459478) $19.01

Clutch Release Shaft, Used - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 620, 621, 630, 640, 641, 650, 660, 700, 701, 740, 741, 800, 801, 820, 840, 841, 850, 860, 900, 950, 960, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 4040, 4140, Replaces Ford OEM number B7510A2, For a new version of this item use Item #: 183687, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459482) $13.01

Clutch Release Throw Out Bearing - Greaseable - Compatible with Ford Tractor(s) NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 4000, 4100, 4110, 4410, 4600, 4600SU I.D.: 2.0625" O.D.: 3.562" Thickness: .812" Replaces Ford OEM nos C7NN7580A, C0NN7580A, E1ADKN7580B (Item #: 113482) $19.10

Clutch Rod - This new Clutch Rod fits: (2000, 3000 10/1969-5/1971 with Double Clutch), (4000, 5000 10/1969), 7000, (5600, 5900, 6600, 7600, 6510, 6610, 7610 less Cab), Industrials (2100LCG, 3400 10/1969-5/1971). Replaces OEM part number D8NN7D081FB. (Item #: 170129, Ref: D8NN7D081FB) $56.00

Clutch Shaft Bushing - This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Item #: 178029, Ref: 407508A) $7.90

Cover Assembly, Clutch - LuK NC - For Ford tractor model 4000, Replaces Ford OEM number C5NN75632, Diameter: 11", (Item #: 166020) $84.98

Dual Clutch Kit with 10 spline RIGID disc - This new dual stage clutch kit contains a new 11 inch, 3 lever dual pressure plate assembly (D8NN7502AA), a new 11 inch 10 spline RIGID type clutch disc (E8NN7550HA), new release bearing, new pilot bearing and clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: Includes PTO Disc. (Item #: 119867, Ref: 1112-6089) $470.00

Dual Clutch Kit with 10 spline SPRING disc - Kit contains 11 inch, 10 Spline 1 inch hub, Spring Drive Disc E8NN7550HA. 8 1/2 inch 29 Spline, 1 7/8 inch hub PTO Disc in Double Pressure Plate D8NN7502AA. Pilot and Release Bearings. Includes Pilot Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. (Item #: 112324, Ref: 1112-6075) $460.00

Dual Clutch Kit with 15 spline Spring disc - This Clutch Kit includes NEW parts: D8NN7502AA Pressure Plate is 11 inches and 29 Spline, 3 lever. C7NN7550B Clutch Disc with Springs is 11 inches and 15 Spline on a 1 inch hub. Release and Pilot Bearings and Clutch Alignment Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. (Item #: 119869, Ref: 1112-6061) $457.00

Dual Clutch Kit with Triangular disc - This new dual stage clutch kit includes a new 11 inch, 3 lever, 29 spline double pressure plate assembly (D8NN7502AA), a new 11 inch, 10 spline, triangular clutch disc (E8NN7550BA), new release bearing, new pilot bearing, and a clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: PTO disc included. (Item #: 119864, Ref: 1112-6076) $434.00

Friction Disc - 5.85 inch outside diameter, 52 Teeth. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000 (1962-1964), 4110, 501, 541, 601, 611, 620, 621, 630, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Item #: 155471, Ref: PBB77519A) $21.20

Friction Plate - Clutch friction plate, 5-1/4 inches outside diameter, 45 internal splines. For model 4000. (Item #: 150772, Ref: C5NNP743A) $14.20

No
Picture
Friction Plate - Clutch Friction Plate. For tractor models (3000, 4000 from 1/1965 and up), 4100, 4600. (Item #: 172535, Ref: C7NNP743B) $16.60

Friction Plate, Select-O-Speed #2 or #3 - For tractor models 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Item #: 152079, Ref: C0NN7B455A) $74.00

Input Shaft Retainer - This Input Shaft Retainer fits the following Ford Tractor Models with live pto and double clutch and 5 speed transmission, serial number 14256 and up 1958-1964: 2000, 4000, 661, 861, and 961. It has a tube length of 2.105 inches and an overall length of 5.120 inches. Replaces part number 311261. (Item #: 115055, Ref: 311261) $133.00

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate - Pressure Plate Assembly, 11 inch. For models: 4000, 4100, 4140, 4200, 4600SU, 4600. (Item #: 130115, Ref: C5NN7563U) $157.00

Pressure Plate - 11 inch, 4 lever with 8 mounting holes. Tractors: 2000, 2100, 2110 (1965-9/1969), 2300, 3000, 3055 (1965-9/1969), 3100, 3110, 3120, 3190 (1965-9/1969), 3300, 3310, 3330 (1965-9/1969), 4000, 4100 (1965-9/1969), 4140 (10/1971-9/1975). (Item #: 159020, Ref: C5NN7563V) $140.00

Pressure Plate - For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a Remanufactured version of this sku use Item #: 204476, (Item #: 135034) $496.00

Pressure Plate - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4200, 4400, 4410, 4500, 5000, 5100, 5200, Replaces Ford OEM number C9NN7563D, D0NN7563A, Replaces New Holland OEM number 81822440, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate type: Single Stage, Will Replace The Three Finger Original Style, (Item #: 165415) $68.98

Pressure Plate, 10 Inch, Single Clutch - This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Item #: 172999, Ref: B8NN7563A) $154.00

Pressure Plate, 11 inch, Remanufactured - SEE PART NUMBER C5NN7563U FOR NEW PRESSURE PLATE. 11 inch single pressure plate, spline diameter 1.875 inches, 29 splines, with PTO hub (flat fly wheel). For tractor models 2000 3 CYL. INDEP. PTO, 2000 INDEP. PTO, 2100 3 CYL. INDEP. PTO, 2100 INDEP. PTO, 2110 3 CYL., INDEP. PTO, 2110 INDEP. PTO, 4000 65-9/69, 3 CYL. INDEP. PTO, 4100 10/71-10/80 INDEP. PTO, 4100 65-9/69 INDEP. PTO, 4140 UTILITY SPECIAL 1/65-12/74; 10/69-9/71, INDEP. PTO, 4200 65-9/69 INDEP. PTO, 4600 10/75-10/80 INDEP. PTO, 4600SU 10/75-10/80, INDEP. PTO. (Item #: 206224, Ref: C5NN7563U-RP) $217.00

Pressure Plate and Cover - 11 inch Single Clutch. For tractor models (4000, 4100, 4110, 4200, 4410 all with transmission PTO or live PTO). (Item #: 159020, Ref: C5NN7563Z) $140.00

Pressure Plate Assembly - This is an 11 inch Double Clutch with a 29 Spline 8 1/2 inch PTO Disc with 1 7/8 inch hub, and a 1.750 inch Flywheel Step. It replaces part numbers 86634451, D8NN7502AA, D8NN7502BA, D8NNY502AA and 83939291. (Item #: 159119, Ref: D8NN7502BA) $338.00

Pressure Plate Assembly, Remanufactured, C5NN7563V - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000, 4100, 4140, Replaces Ford OEM number C5NN7563V, C5NN7563Y, C5NN7563Z, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 159020, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206223) $131.00

Pressure Plate Assembly, Remanufactured, C9NN7563D - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4200, 4400, 4410, 5000, 5100, 5200, Compatible with Ford Construction and industrial models 4140, Replaces Ford OEM number C9NN7563D, C9NN7563E, D0NN7563A, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 128240, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204583) $111.01

No
Picture
Pressure Plate Assembly, Remanufactured, D8NN7563DB - For Ford tractor models 2000, 2100, 2110, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3190, 3300, 3310, 3330, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 5190, 5200, 5340, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 530A, 531, 4140, 4400, 4500, Replaces Ford OEM number D8NN7563DB, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Hub: 1-7/8", Pressure Plate Spline: 29, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 135020, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206219) $105.00

Pressure Plate, Remanufactured, 957E7502B - For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 135034, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204476) $402.87

Pressure Plate, Remanufactured, NDA7563A - For Ford tractor models NAA, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 2030, Replaces Ford OEM number NDA7563A, 86640482, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 204582) $95.01

Pressure Plate, Single - Pressure plate assembly, 11 inch single clutch. Three finger, 6 mounting bolt holes. For tractor models 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4200, 4400, 4410, 4500, 5000, 5100, 5200. Replaces C9NN7563D, C9NN7563E, D0NN7563A (Item #: 130091, Ref: C9NN7563D) $173.00

PTO Clutch Disc - PTO Disc 8-1/2 inch, 29-Spline, 1-7/8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12/1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12/1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1/1965-12/1974), (335 utility 10/1975-9/1978), 3500, 3550, (3600 10/1975 and up), 3600N Narrow, (3610 10/1981-12/1984), 3910, 4600, 4600O, 4600SU, 530A. (Item #: 169901, Ref: C5NN77641B) $65.00

PTO Disc - 9.062 inch included with pressure plate, rigid disc, organic, 1.875 inch spline diameter, 29 spline. For tractor models 600, 800, 900, Super Dexta. Replaces E55GC9, 83916953, F0NN7550EA, 82006018 (Item #: 178428, Ref: 323033516) $147.00

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $22.50

Release Bearing - Clutch Release Bearing. For tractor models 4000, 8630, 8730, 8830, TW15, TW20, TW25, TW30, TW35. (Item #: 107274, Ref: D8NN7580CA) $24.80

Release Bearing - This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Item #: 107007, Ref: N1087) $18.50

Release Bearing Fork - This Release Bearing Fork is used on Ford 2000, 3000, 4000, 3400, 4400. All 1/1965 to 9/1969 with spring tab for single and double clutch. 4.5 inches wide. Fork spread, 2 inch wide base. Replaces C5NN7N515A, C7NN7N515C. (Item #: 180263, Ref: C7NN7N515C) $110.00

Release Bearing Hub - Dimension A = 1.75 inches, B = 2.05 inches, C = 2.80 inches. Fits 601, 701, 801, 901, 2000, 4000. All up to 1965. 5 speed transmission with SINGLE clutch (serial number 14256 and greater). (Item #: 178568, Ref: 311259) $44.40

Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Item #: 163512, Ref: 9N7561) $41.00

Release Bearing Hub - Dimension A = 2.10 inches, B = 2.48 inches, C = 1.91 inches. For tractor models: 601, 701, 801, 901, 2000, 4000 (DOUBLE CLUTCH, serial number 14256 and up, 1965 and newer). For tractors with 5-speed transmission and double clutch. Replaces OEM number 311260, 86539876. (Item #: 115054, Ref: 311260) $36.30

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Item #: 121564, Ref: 9N7562) $7.00

Spring - Spring for Clutch and Brake Lever Assist. Tractors: 3550, 4000 (11/1972 and up), 5100, 7100 (1965 and up), 420, 515, 532, 535, 4600, 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981). (Item #: 164364, Ref: C5NN2472H) $4.60

Torque Limiter Clutch Disc, Select-O-Speed - 8 inches in diameter, 10 spline, 1.125 inch spline diameter. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965 and up with Select-O-Speed Transmission. (Item #: 112418, Ref: D0NN7A539B) $322.00

Cooling System

Fan, 5 Blade - Measure before ordering. Many of the models listed used more than one size fan. This fan measures 16 inch diameter, 0.625 inch pilot hole, and a 1.75 inch bolt circle (around the perimeter). Used on Ford tractors 1955-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 500, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 900, 901 (Item #: 163821, Ref: F8JL8600CA) $183.00

Fan Belt - Belt, Drive for Fan and Water Pump, 54 inches long. For tractor models 2000, 3000, 4000, 5000. Replaces D4NN10C318A, 86514618 (Item #: 118363, Ref: D4NN10C318A) $11.00

Fan Belt - This fan belt fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Some of these tractors used more than one type of belt. Verify part number before ordering. (Item #: 116686, Ref: EAF8577A) $8.40

Fan Belt - Fits 2000, 3000, 4000, 5000. Industrials: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Some of these tractors used more than one type of belt. Verify part number before ordering. 1/2 X 55.375 inches. (Item #: 114254, Ref: C9NN10C318B) $10.10

Fan Blade, 3 Blade - This 3 blade fan measures 16 inches in diameter. Fits tractor models: 501, 600 Series, 601 Series, 800 Series, 801 Series, 900 Series, 901 Series, 2000, 4000 1955 to 1964. 4 cylinder gas. 3.120 inch bolt circle, .625 inch pilot hole. USED WITH WATER PUMPS CDPN8501C and DCPN8501A. May come painted black, primer gray or primer red. (Item #: 100771, Ref: NCA8600S) $40.60

Fan Blade - 4 Blade - Fan Assembly, 4 Blade, 16 inch diameter, 0.625 inch pilot hole, and mounting holes on 2.5 inch center. For tractor models 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3900, 3910, 4000, 4100, 4110, 420, 4400, 4500, 4600, 4610, 5100, 515, 531, 535, 5600, 6600. Replaces 87017802, 81805721, C5NN8600B, C5NN8600A (Item #: 155455, Ref: C5NN8600A) $44.00

Fan Blade, 6 Blade - This 6 blade fan is for tractor models 2000, 4000, 600, 800, 900. This 6 blade fan has a .5 inch pilot hole, 3.15 inch 4 hole mounting center, 15.5 inch outside diameter. (Item #: 155378, Ref: NCA8600B) $73.00

Fan Blade, 6 Blade, Pusher - 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Item #: 114598, Ref: JE8600A) $92.00

Fan Blade - 8 Blade - For 3 and 4 Cylinder 1965 and up: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7000, 7600. 8 Blade, blue PLASTIC 5/8 inch pilot hole, 4 bolt with 2 1/2 inch center to center on opposite holes, 16 inch outside diameter. (Item #: 178625, Ref: S.60579) $35.00

Fan Shroud - Shroud, Radiator Fan. Ford Tractor (s) 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3610, 3900, 3910, 4000, 4100, 4110, 4200, 4400, 4410, 4600, 4610. Compatible with Ford Construction and Industrial (s) 230A, 231, 233, 234, 333, 334, 335, 445, 515, 530, 530A, 531, 532, 545, 555, 4140. Fiberglass type. Must drill holes. Not like original. Replaces 83910061, 87770026, C5NN8146H, C5NN8146J, D4NN8146A, D6NN8146C, D6NN8146H (Item #: 116905, Ref: D6NN8146H) $80.00

Fan Shroud - For tractor models 501, 541, 600, 601, 611, 621, 700, 800, 900, NAA, (2000, 2110, 2120, 4000, 4110 All before 1964), 2111, 4120, 4121. (Item #: 109990, Ref: NCB8146A) $78.00

Fan Shroud - This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Item #: 109990, Ref: NCA8146A) $78.00

Fan Shroud Hardware Kit - This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Item #: 178200, Ref: 357622-K) $5.60

Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964 4 cylinder tractors, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1/4 inches. Note, the draincock on this ratiator is on the lower front. This might interfere with narrow front end and indusctial models. If your draincock is located on a cast lower outlet pipe, order 135045 (Item #: 101693, Ref: C5NN8005ABECON) $220.00

Radiator - This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B. (Item #: 135045, Ref: C5NN8005AB) $315.00

Radiator - Core size (the finned part) is 17 3/8 inches wide, 16 1/2 inches high with 3 rows of tubes and 9 fins per inch. Also replaces EONN8005MA15M, EONN8005KA15M, EONN8005LA15M, EONN8005MB15M, EONN8005MD15M, C7NN8005N. For 3-cylinder engines (1965 and newer) on: 2000, 2100, 2120, 2300, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4140, 4400, 4600, 4610. (Item #: 101695, Ref: C7NN8005H) $233.00

Radiator Cap - This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Item #: 108081, Ref: 1T8100A2) $10.00

Radiator Cap - 13 PSI Radiator CAP (FOR 2000, 3000, 4000, 5000, 7000 1965 TO 1975), (2600, 3600, 4100 4600, 5600, 5700, 6600, 6700, 7600, 7700 1975 TO 1981), (2610, 3610, 4110, 4610, 5610 6610, 7610, 7710 1981 and up). REPLACES D2AE8100A1A. (Item #: 123522, Ref: E2NN8100BA) $5.60

No
Picture
Radiator Drain Faucet - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2031, 2100, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4600, 4610, 4630, 5000, 5110, 5600, 5610, 5640, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7410, 7610, 7700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030 Replaces Ford OEM number 81465471, C9NN8115A, C5NN8115B, , Compatible with New Holland Harvester (s) 1880, 1890, 1895, 1900, 1915, 2100, Compatible with New Holland Baler (s) 1283, 1425, 1426, Compatible with New Holland Hay Cutting (s) 1100, 1112, 1114, 1116, 1118, 1469, 1495, 1496, 1499, Replaces New Holland OEM number 81465471, Fits all models with 1/4" NPT threads, (Item #: 176414) $4.80

Radiator Hose, Bottom - Inside diameter 1.725 inches. Fits GAS and DIESEL MODELS: 2000 (3 Cylinder), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420, 4600. GAS ONLY MODELS: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Item #: 113920, Ref: C5NN8286B) $8.40

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Item #: 178164, Ref: 608287) $3.80

Radiator Hose, Lower - This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 108082, Ref: 312588) $5.20

Radiator Hose, Lower - This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Item #: 182499, Ref: 313151) $14.20

Radiator Hose, Upper - This Upper Hose is for Gas engines. Hose inside diameter 1.5 inch. Fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700. (Item #: 113921, Ref: C5NN8260D) $9.50

Radiator Hose, Upper - Hose inside diameter 1.5 inch. FITS: 2000 (3 Cylinder DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 115045, Ref: D5NN8260D) $5.80

Radiator Hose, Upper - This upper radiator hose is for tractor models NAA, Jubilee, 600 series, 700 series, 800 series, 900 series, 2000 4-cylineder, 4000 4 cylinder Series. It can replace 310048. This hose measures 7 3/8 inches long, 1 1/2 inch outside diameter and 1 3/16 inside diameter. (Item #: 108083, Ref: NAA8260B) $3.40

Radiator Mounting Bolt Kit - These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Item #: 182536, Ref: 351641S8) $8.30

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.40

Radiator, Premium Used - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5190, 5200, 5340, 7000, 7100, 7200, Replaces Ford OEM nos D3NN8005B, Our premium used radiators have been cleaned, inspected, and pressure checked, (Item #: 300168) $275.01

Radiator with Oil Cooler - For the following tractors with oil cooler, 3 cylinder GAS 158 CID or 158 CID Diesel: 2000, 3000, 4000, 4100, 4400 (1965 to 1975); 420, 532 with torque converter (1975 to 1981). Core is 18 inches tall and 16 inches wide. Oil cooler fittings on front side. Oil cooler can be plugged and not used if desired. For Radiator Cap order part number E2NN8100BA. Replaces original part numbers D8NN8005PA, E0NN8005MD15M, E0NN8005MA15M, E0NN8005KA15M, E0NN8005LA15M, E0NN8005MB15M. (Item #: 101694, Ref: D8NN8005PA) $277.00

Thermostat - Thermostat, 168 degrees. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Dexta, Super Dexta. (Item #: 178010, Ref: D8NN8575AAWG) $9.40

Thermostat - 172 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Item #: 185072, Ref: D8NN8575CAWG) $20.00

Thermostat - This thermostat is 160 degree lo-temp. For gas engines 1953 to 1964. For gasket, order 191970 (Item #: 113939, Ref: EAF8575BWG) $14.00

No
Picture
Thermostat - 88°C / 192°F - For Ford tractor models 501 (1/57-12/62), 541 (1/59-12/64), 600 (1/57-12/57), 601 (1/57-12/62), 611 (1/59-12/64), 620 (1/54-12/64), 621 (1/58-12/64), 630 (1/55-12/57), 631 (1/58-12/64), 640 (1/55-12/57), 641 (1/58-12/64), 650 (1/56-12/57), 651 (1/58-12/64), 660 (1/59-12/63), 700 (Series), 2000, 2031 (1/60-12/62), 2100 (3/65-12/74), 2110 (3/65-12/74), 2111 (1/63-12/64), 2120 (3/65-12/74), 2120 (1/63-12/64), 2131 (1/63-12/64), 2150 (1/70-12/74), 2300 (1/65-12/74), 2310, 2600 (1/75-12/81), 2600 (N, 1/75-12/81), 2600 (R, 1/75-12/81), 2600 (V, 1/75-9/76), 2610, 2610 (V, 1/70-2/90), 2810 (1/83-2/90), 2910, 3000, 3055 (1/65-12/74), 3310, 3400, 3600, 3600 (N, 1/75-12/81), 3600 (O, 1/75-12/81), 3600 (V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610, 3610 (V, 1/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (H, 1/83-2/90), 3910 (N, 1/83-2/90), 3910 (5/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 4000, 4000SU, 4030 (1/61-12/62), 4031 (1/60-12/62), 4100, 4110, 4110 (TR, 1/63-12/64), 4110 (N, 1/81-2/90), 4110 (V, 1/81-2/90), 4110 (N, 12/81-2/90), 4120 (1/63-12/64), 4121 (1/63-12/64), 4130 (3/63-12/64), 4131 (1/63-12/64), 4140 (1/63-12/64), 4190 (1/65-12/74), 4200, 4330 (1/65-12/74), 4340 (1/65-12/74), 4410, 4600, 4600 (NO, 10/75-12/81), 4600SU (1/75-12/81), 4610, 4610 (N, 1/81-2/90), 4610 (NO, 1/81-2/90), 4610 (O, 1/81-2/90), 5000, 5110, 5200, 5600, 5610, 5700, 5900 (5/85-12/93), 6410, 6600, 6610, 6610 (O, 1/81-10/91), 6700, 6710, 6810, 7000, 7200, 7410, 7610, 7610 (O, 10/81-12/91), 7700, 7710, 8000, 8200 (1/68-9/72), 8700, 9000, 9200 (1/69-9/72), 9600 (10/73-7/76), 9700, Compatible with Ford Construction and industrial models 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 333 (1/75-12/81), 334 (1/81-4/83), 335 (1/83-2/84), 420, 445, 515, 531 (1/75-12/81), 532, 535, 540, 545, 550, 3500, 3500 (1/65-12/74), 3550, 4500 (1/65-12/74), 7500, 8400 (1/71-12/72), Replaces Ford OEM number D8NN8575BA, D8NN8575BAWG, 83916916, 87712913, Fits Ford Construction and industrial models 2130 (3 cyl. 1/63-12/64), (Item #: 176475) $10.10

Thermostat Housing - This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Item #: 160754, Ref: 310031) $53.00

No
Picture
Thermostat Housing, Used - For Ford tractor models 2100, 2110, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4600, 4610, 4630, 5000, 5110, 5200, 5600, 5610, 6410, 6600, 6610, 6700, 6810, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 335, 535, 545, 550, 6500, Replaces Ford OEM number C7NN8594B, 81820903, For a new version of this item use Item #: 127343, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435926) $6.76

Water Outlet Housing - Housing, Water Outlet Connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700. (Item #: 127343, Ref: C7NN8594B) $11.80

Water Pump - For tractor models 340A, 340B, 345C, (4500 diesel), (540, 550, 555, 555A, 555B, 3930, 4000, 4130, 4600, 4610H all with BSD333 engine), (2000, 2600, with BSD326 engine), (3000, 3600, 3900 with BSD329 engine), 3610 3230, 3430, 3910H with BSD332). Water Pump with Single Pulley, Back Housing and Gasket. Replaces 87800115, C5NE8501A, C5NN8501A, D3NN8501A, D5NN8501E, D8NN8501CA, D8NN8501UA, D8NN8501UB. (Item #: 115341, Ref: D8NN8501UC) $80.00

Water Pump - This Water Pump comes with Single Groove Pulley and Gasket. Does not come with back housing. Comes with back housing gasket. Replaces FAPN8A513GG. For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5710, 5610, 6610, 6710, 7610, 7710. Also replaces FAPN8A513GG. Uses Fan blade with 2-1/2 inch bolt spacing center-to-center. (Item #: 100558, Ref: EAPN8A513F) $42.00

Water Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 4630, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 3500, 3550, 4400, 4500, Replaces Ford OEM number D3NN8501A, 87800115, 81814205, 81838685, 83905629, 83914192, 83919542, 83926000, 83943914, 88NY8501AA, C5NE8501A, C5NN8501A, D8NN8501CA, D8NN8501UA, D8NN8501UB, D8NN8501UC, For models without heater plug or cab heater, With Single Pulley, Includes: pump to backplate gasket, backplate, backplate to block gasket, For pump with heater hole use Item #: 115341, (Item #: 140587) $89.00

Water Pump Cover Plate Gasket - For all 4-cylinders 1953-1964. Price is for each. (Item #: 156680, Ref: EAF8507B) $3.00

Water Pump Kit - This water pump repair kit is for Water Pump CDPN8501C used on 4 cylinder gas engines on tractor models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Item #: CPN8591B) $42.00

Water Pump Mounting Gasket - Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Item #: 150390, Ref: EAF8513A) $2.90

Water Pump Pulley - Single groove. For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3910H, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5110, 550, 555, 555A, 555B, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7700, 7710. (Item #: 179774, Ref: C5NE8509A) $82.00

Water Pump Replacement Kit - Kit includes CDPN8501C water pump with press on pulley, 312588 lower hose, NAA8260B upper hose, EAF8577A fan belt, hose clamps, gasket, and clamp key. It is used on Ford 134 and 172 cubic inch engines in models from 1955-1964 with manual steering. YTO-119845 (Item #: 185544, Ref: 119845) $94.00

Water Pump Replacement Kit - Kit includes CDPN8501C water pump with gasket, NAA8260B upper hose, 313151 lower hose, 2- EAF8577A fan belts (one for generator one for power steering Pump), 4 hose clamps, and clamp key. This kit is used on Ford tractors, 1955-1964, with 134, 144 and 172 cubic inch 4 cylinder engines and power steering (factory or added). YTO-119846 (Item #: 185546, Ref: 119846) $100.00

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Item #: 178141, Ref: PRM77BR) $10.60

Water Pump - uses Bolt-On Pulley - This water pump uses the bolt on style pulley, which does not come with the water pump and is not available. For tractor models 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172 inch industrial gas and diesel engines (Item #: 100557, Ref: DCPN8501A) $53.00

Water Pump - with Press-On Pulley - This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pulley and is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S or NCA8600B 6 Blade Fan Uses 4 1/4 inch mounting bolts on a 3 1/4 inch circle. (Item #: 100556, Ref: S.60627) $44.00

Decals and Emblems

Decal Set, 60-68 Gas - Hood Set for Ford Model 4000, up to 1968, 2 pieces (Item #: 100696, Ref: F503HA) $31.60

Decal Set, 62-64 Gas - Complete decal set for 1962-1964 Gas 4000 minus the Shift Pattern decal. Shift Pattern is sold separately. (Item #: 183074, Ref: S.67696) $69.80

Decal Set, 68-75 Diesel - Complete set except for Shift Pattern. For model 4000 diesel 1968-1975. (Item #: 102005, Ref: S.66692) $68.48

No
Picture
Decal Set, 68-75 Gas - Complete 15 piece set. For model 4000 gas 1968-1975. (Item #: 102004, Ref: S.66691) $66.57

Decal Set, 68-75 Gas - Hood set for Ford Model 4000, 1968 and up, 6 pieces. (Item #: 184124, Ref: F503HB) $40.20

Decal Set, Hood - For model 4000 with Jubilee style sheet metal. (Item #: 182628, Ref: FJUB4000) $39.10

Ford 4000 Decal Set, Gas Hood Only - For Ford tractor model 4000 (gas 4/68-later), Ford 4000 gas 4/68-later, except row crop, Hood decal set only, Made in the USA, (Item #: 103138) $48.30

Ford Decal Set, 4000 1968-75, Vinyl - For Ford tractor model 4000 (diesel 4/68-later), Ford 4000 diesel 4/68-later, except row crop, Hood decal set only, Made in the USA, (Item #: 102003) $42.22

FORD Lettering for Grill - These 1 7/8 tall Vertical Letters for Grill part number C3NN8200A and C3NN8200A. For ford 2000 and 4000 1962-1964, (2000, 3000, 4000, 5000, all 1965-1/1971). (Item #: 182909, Ref: 86514060) $47.00

Hood Decal Set, 62-64 Gas - Hood Set 2-Piece for 4000. (Item #: 182628, Ref: FJUB4000) $39.10

Hood Ornament - For tractor models (2000, 4000 4-cylinder 1962-1964). (Item #: 108189, Ref: C3NN16B748A) $63.00

Shift Pattern Decal - For tractor models 4000, 4600 with 8 speed transmissions. (Item #: 102051, Ref: C5NN7B292FN) $12.70

Drive Train

2nd Mainshaft and Countershaft Gears - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number B9NN7114A, B9NN7A381B, 4 Speed Only, 2 Piece Set, (Item #: 110911) $191.62

3rd Gear - This is 3rd Gear in a 5 speed Transmission, 1958 and up. It replaces original part number NDA7137A. (Item #: 178926, Ref: NDA7137A) $177.08

Axle Rear Collar - This rear axle collar is for tractor models 600, 800, 601, 801, 2000, 4000. (Item #: 128478, Ref: NCA4132A) $15.40

Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref: 8N4233A) $6.00

Axle Shaft Seal - Seal and Retainer Assembly, Outer, for Rear Axle Shaft. For tractor models 3250C, 260C, 2810, 2910, 3055, 335, 340, 340A, 340B, 345C, 345D, 3550, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83999828, C5NN4969B, C5NN4969D, 81819097, 81809097, 81875227, 81859537, F2NN4969AA, E0NN4969AA (Item #: 163590, Ref: C5NN4969D) $18.60

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $15.98

Bearing Cone, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Item #: 165149, Ref: C5NN4N221B) $11.80

Bearing Cup - This differential bearing cup is for tractor models 800, 801, 4000, 2000. (Item #: 112126, Ref: NDA4222A) $18.40

No
Picture
Bearing Cup, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Item #: 165149, Ref: C5NN4874B) $11.80

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Item #: 183460, Ref: C5NN7A452A) $19.00

Bearing Retainer Gasket - This Bearing Retainer Gasket (Shim) is used on Ford New Holland tractors 1965 and later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3610, 4000, 4110, 4110LCG, 531. Replaces D1NN4229A, 81825098 (Item #: 182922, Ref: D1NN4229A) $43.30

Bearing, Transmission, Output Shaft - This transmission output shaft bearing is for tractor models 2000 and 4000 1965 and prior, 600, 800, 900. All the above with 5 Speed Transmissions. (Item #: 172983, Ref: NDA77060A) $30.00

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Item #: 179412, Ref: D4NN4N507A) $16.00

Center Housing To Transmission Case Gasket - This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Item #: 178192, Ref: 310590) $6.00

Countershaft - This countershaft is for tractor models 600, 700, 800, 2000, 4000 (1955-1964), and for 2000, 3000 4-Speed Transmission with PTO (1965-1970). Also replaces NDA7111C. (0622R) (Item #: 126176, Ref: C5NN7N109A) $202.80

Countershaft Bearing Cone - This front transmission countershaft bearing cone is for 4 and 5 Speed Transmissions. For tractor models: 2000 and 4000 before 1964, and 600, 800, 900. (Item #: 109682, Ref: NDA77123A) $15.10

Countershaft Bearing Cup - This transmission countershaft bearing cup is for 4 and 5 speed transmissions. For tractor models: 2000 and 4000 prior to 1964 and for 600, 800, 900. (Item #: 111704, Ref: NDA77124A) $10.10

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $383.00

Countershaft, Transmission - 16/18 tooth, 26 spline, 10.00 inches long. For tractor models (2000, 3000, 4000 all with live PTO, 8 speed transmission, built from 9/1965 and up). (Item #: 172473, Ref: C5NN7111N) $416.00

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Item #: 170135, Ref: E0NN7106BA) $65.00

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Item #: 177372, Ref: C5NN7N166B) $24.90

Differential Bearing - For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Dexta, Super Dexta, TS100, TS110, TS115, TS80, TS90. Replaces 957E4222, 957E4221, 81803413, 81803420 (Item #: 150360, Ref: 185251M1) $146.00

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Item #: 179801, Ref: 195159M1) $28.90

Differential Lock Coupler - Used in Ford equipment with differential lock, 1965 and later, this part replaces Ford / New Holland part numbers: C5NN4N064A, 81812261, 81871527. This part is used on the following models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5190, 5200, 532, 5340, 535, 540, 545, 550, 5500, 555, 5550, 555A, 555B, 555C, 555D, 555E, 5600, 5610, 5610S, 575D, 575E, 5900, 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6610S, 6700, 6710, 6810, 7000, 750, 7500, 755, 755A, 755B, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, TS100, TS90 (Item #: 180499, Ref: C5NN4N064A) $109.00

Gasket, Axle housing to center - Gasket center housing to rear axle housing. For Ford 4 cylinder non-industrial tractors, 1953 - 1964. NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4120, 4121, 4131, 4140. 13 Mounting Holes, 15 Inch O.D., 12-15/16 Inch I.D., 0.010 Inch Thick. (Item #: 172802, Ref: NAA4036A) $2.80

Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Gear, 1st - 49/28 teeth, 1.775 inch inside diameter, 7.125 inch outside diameter. For tractor models 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Item #: 172470, Ref: C5NN7100A) $218.91

Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref: 8N7100) $301.00

Gear 1st and 5th - Gear has 49 and 28 teeth. Verify tooth count. C5NN7N100A was used to describe two different parts. If you a gear with 46 and 28 teeth, use E6NN7N100AA. Replaces (Item #: 166004, Ref: C5NN7N100A) $90.01

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref: 8N7102) $257.00

Gear, 3rd and 7th - This gear has 35 teeth. It is used on 8 Speed, Non Synchro transmissions. Replaces OEM numbers 7706988, 07706988, 83900392, 81805076, 83960029, 83960392, 83990392, C5NN7N339D, E9NN7N315AA (Item #: 179369, Ref: E9NN7N315AA) $110.00

Gear, Countershaft, 6 Speed Transmission - 24 middle teeth, 57 outside diameter teeth, 26 spline. For tractor models (2000, 3000, 4000 all with 6 speed transmission.) (Item #: C5NN7113G) $197.31

Gear, Countershaft, 8 Speed Transmission - 30 middle teeth, 46 outside diameter teeth, 26 spline. For tractor models (2810, 2910, 3550, 3910, 4000, 4610 all with 8 speed transmission) (Item #: 172441, Ref: C5NN7113J) $380.92

Gear, Differential Side - Part 1 in the picture. For tractor models (2000, 3000, 4000 all 1965-1975 LH with diff. lock, LH or RH without locks), (5000, 7000 all 1965-1975 RH with Diff. lock, LH/RH without diff locks), (2600, 3600, 4100, 4600 all 1975-1981 LH with diff. lock, LH/RH without locks), (5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 RH with Diff. lock, LH/RH without locks), (2610, 3610, 4110 all 1981 and up LH with diff lock, LH/RH without locks), (5610, 6610, 6710, 7610, 7710 all 1981 and up RH with diff lock, LH/RH without locks). (Item #: 170394, Ref: C5NN4236A) $95.00

Gear, Differential Side - Part 2 in picture. For tractor models (2000, 3000, 4000 all 1965-1975 RH with diff. lock), (2600, 3600, 4100, 4600 all 1975-1981 RH with diff. lock), (2610, 3610, 4110, 4610 all 1981 and up RH with diff. lock). (Item #: 170395, Ref: C5NN4239A) $109.30

Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref: B9NN7A381B) $160.00

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. Replaces C5NN7N012B. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, 83963585, E2NN7N012AA, E6NN7N012AA, 81872311, 83960462, 81813476 (Item #: 170396, Ref: E6NN7N012AA) $215.72

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Item #: 170396, Ref: 83960462) $215.72

Gear, Reverse - For tractor models 2000, 3000, 4000. All with 8 Speed Transmission 9/1965>. Reverse Gear. 30 and 28 teeth. Replaces C5NN7K013A. (Item #: 165622, Ref: C5NN7K013E) $60.98

Gear, Reverse - With 30 Teeth. It replaces part numbers C5NN7K013A, 81813563 (Item #: 165622, Ref: C5NN7K013A) $60.98

Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set) $193.00

Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000, 3055, 3100, 3330, 335, 3400, 3500, 3600, 4000, 4100, 4110LCG, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 531, Dexta, Super Dexta. Replaces E49GA9 (Item #: 178386, Ref: E49GA9) $125.00

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534) $3.60

Gear Shift Boot - This gear shift boot has a bottom hole that is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Item #: 108079, Ref: C5NN7277C) $3.30

Gear Shift Coupler, Front - 28 teeth, 17 splines. For tractor models 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Item #: 163571, Ref: E6NN7N072AA) $95.00

Gear Shift Coupler, Rear - 28 teeth, 20 spline. For tractor models 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Item #: 167824, Ref: 82983825) $91.00

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Item #: 121228, Ref: E440GB9) $2.90

Gear Shift Lever Knob, Round - For Ford tractor models Dexta, 2000, 3000, 4000, 5000, Replaces Ford OEM number 957E7213A, 3/8" NF Thread, (Item #: 172438) $3.90

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Item #: 155070, Ref: 9N7227B) $11.00

Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B) $94.32

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Item #: 169927, Ref: 9N7221B) $5.70

Gear Shift, Rail - High/Low. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Item #: 172806, Ref: C5NN7240AD) $56.00

Gear, Transmission Countershaft - 50 teeth, 11 splines. For tractor models 2810, 2910, 3230, 3430, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4830. (Item #: 172483, Ref: D1NN791A) $204.68

Hi-Low Shift Lever - For Ford tractor models 2000, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5340, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445D, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545D, Replaces Ford OEM number C5NN7210D, 81804870, C7NN7210A, 81818563, C7NN7210AC, (Item #: 170011) $47.40

No
Picture
Idler Gear Shaft - For Ford tractor models 2000, 3000, 3400, 3500, 4000, 4400, 4500, Replaces Ford OEM number C5NN872A, (Item #: 167631) $28.10

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $37.30

Input Shaft - This is an input shaft used on Sherman Step-Up/Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Item #: 178936, Ref: C3NN7015D) $229.00

Input Shaft - This input shaft is for the 4 Speed transmission. It has 15 Spline, and is 17 inches in overall length. It is for tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Item #: 179311, Ref: 311203) $175.54

Input Shaft Tube - This Tube is used in 4 Speed Transmissions, Ford 4 Cylinder Tractors 1958-1964. Replaces original part numbers 311202, 311212. (Item #: 180363, Ref: 311202) $220.42

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Item #: 172715, Ref: E6NN7106AA) $68.00

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $24.90

Mainshaft, Transmission, Rear - 30 teeth, 17 and 28 splines. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) Replaces C5NN7C095D, 81804717 (Item #: 166035, Ref: C5NN7C095D) $150.98

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5/8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Item #: 113703, Ref: 957E7010) $15.80

Oil Seal, Secondary Output Shaft - For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. Measures 83mm outside diameter x 46mm inside diameter x 14.8mm width. Replaces E42GA9, 81717023 (Item #: 176493, Ref: E42GA9) $7.70

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Item #: 150013, Ref: 86512015) $14.20

Output Shaft Bearing Set - Contains C5NN7N041A Cup and C5NN7N042A Cone. These were used on 8 Speed Transmission, 1/1965 - 4/1971. Replaces C5NN7N041A, C5NN7N042A, 86611047, 81804630. (Item #: 150013, Ref: C5NN7N041A) $14.20

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA) $358.00

Output Shaft Pilot Bearing - Measures 25mm inside diameter, 52mm outside diameter, 16.25mm wide. It replaces: E76GA9, C5NN7N014A, 86705858, C5NN7N047A, C5NN7N044A, 83990517, 81804636, 81804637, C5NN7N048A, F718701030030, 339482X1, 3010151X91, 194145-11910, 971326, 30205, 30205M-TIM, 30205M (Item #: 185088, Ref: C5NN7N014A) $15.70

PTO Countershaft - This PTO Countershaft is used in 5 Speed Transmissions 1955-1964. (Item #: 178942, Ref: NDA701B) $176.00

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Item #: 172919, Ref: D9NNC729BA) $7.50

PTO Input Shaft - This PTO Input Shaft is used on 5 speed transmissions with Live PTO. Used 1958 and later. 7 13/16 inches long. Replaces original part number 311249. (Item #: 180252, Ref: 311249) $141.01

PTO Shaft HD - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (all 1964 - earlier), Replaces Ford OEM number 312428, Heavy Duty, 32.620" Long, 1-3/8", 6 Spline, (Item #: 153389) $139.00

Rear Axle - This is a Collar Type Rear Axle used on the following 1965 or later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3610, 4000, 4110, 4110LCG, 531. Additional $10 shipping due to size and weight. Replaces D7NN4244A, C5NN4244A, 83912192 (Item #: 182961, Ref: C5NN4244A) $284.00

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91) $6.40

Secondary Output Shaft Bearing - This Secondary Output Shaft Bearing measures 1.5000 inches inside diameter, 3.2500 inches outside diameter, 0.7500 inches width. Replaces original part numbers E53GA9, 81800632, SKF RLS 12 (Item #: 180301, Ref: E53GA9) $53.00

Select-O-Speed Control Selector - For tractor models: 611, 671, 681, 771, 811, 871, 881, 971, 1811, 1871, 1881, (2000, 4000 4 cylinder), 2111, 4121 all 1959 and up with Select-O-Speed. (Item #: 115057, Ref: C0NN7202B) $62.80

Select-O-Speed Control Selector Cover - Fits Select-o-Speed Tractors: 1959 and later. Replaces original part numbers 313936, 81814248, C5NN7N013A. For models 1811, 1871, 1881, 2000, 2110, 3000, 3100, 3400, 3500, 4000, 4100, 4110, 4200, 4400, 4500, 5000, 5100, 5200, 611, 671, 681, 771, 811, 871, 881, 971 and 981. (Item #: 115056, Ref: C5NN7N013A) $58.00

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Item #: 125339, Ref: C5NN7N225A) $4.00

Shift Cover Plate Gasket - For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Item #: 109958, Ref: 8N7223) $3.60

Shifter Assembly, Cast Iron - For tractor models with 6, 7 and 8 speed transmissions from 10/1966 to 1975. Complete Shift Cover Assembly includes cover, shifter boots. DOES NOT INCLUDE GASKET, KNOBS BOOTS OR PLUGS. We do not have plugs available. Order C5NN7N225A gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 184788, Ref: C5NN7211E) $113.00

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10/1966. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 125338, Ref: S.66211-LG) $80.00

Shift Knob - For tractor models Dexta, Super Dexta, (Major from 8/1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. 5/16 Inch - 24 UNF Thread. 81804882, 957E7213, NAA7209A Note, this part may arrive spherical as shown, or more flattened like BB7213A. This part is differentiated by 5/16 Inch - 24 UNF Thread. (Item #: 116912, Ref: C5NN7213A) $7.00

No
Picture
Shift Knob - Round Ball shift knob is 3/8 inch NF thread. For tractor models 2000, 3000, 4000, 5000, Dexta. Replaces 957E7213A, 81804882, 7W7213B (Item #: 150683, Ref: 180006M91) $4.00

Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Item #: 110012, Ref: BB7213A) $4.20

No
Picture
Shift Lever, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 3400, 3500, 4000, 4400, 4500, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number C5NN7202B, For a new version of this item use Item #: 110007, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459149) $48.01

Side Cover Gasket - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Item #: 112236, Ref: 9N4131) $1.00

Sliding Coupling - This Sliding Coupling is used in Ford tractors 1965 and later with 6 speed transmission. Replaces C5NN7106A, 81804736 (Item #: C5NN7106A) $47.98

Spider Cross, Differential - For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. Replaces C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Item #: 113611, Ref: E1NN4211AA) $63.00

Spider Gear - Gear, Differential Spider. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Major, Super Dexta, Super Major. Replaces 81728114, 957E4292B, E1ADDN4213B. (Item #: 172809, Ref: DDN4213B) $41.60

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref: 9N7120) $97.00

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 110536, Ref: 9N7066) $12.00

Transmission Countershaft Seal - This Transmission Countershaft Seal replaces original part number E62GE9. New Holland 81717077. It measures 2.885 inches x 1.649 inches x 0.625 inches. (Item #: 172981, Ref: E62GE9) $6.50

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref: 8N7010) $18.40

Transmission Filter - This transmission filter is exactly like the original, used on Select-o-Speed 601, 801, 901, 2000 and 4000 models, 1959 thru 1964. Replaces C0NN7B155A (Item #: 183033, Ref: C0NN7B155A) $37.00

Transmission Front Plate Gasket - This gasket is used on 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 2610, 2910, 3610, 2910, 4610, 5610, 6610, 7610, 7710. Replaces E6NN7N057AA. (Item #: 179306, Ref: E6NN7N057AA) $3.90

Transmission Gasket Set - Transmission Gasket Set for 3 cylinder Fords, 1965 and up with 6 or 8 speed Non-Synchro Transmissions. (Item #: 178201, Ref: S.65396) $29.60

Transmission Mainshaft - 28/28 teeth, 17 spline, 12 inches long. For tractor models: 2000, 2110, 2120, 231, 2600, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, Super Dexta. (Item #: 113725, Ref: 960E7061A) $78.98

Transmission Oil Pump - For tractor models 550, 555, 555A, 555B, 655, 655A, (340, 340A, 340B, 445, 445A, 450, 540, 540A, 540B, 545, 545A ALL WITH POWER REVERSE TRANSMISSION), (3000 series, 3500, 3550, 4000 series, 4410, 4500 ALL 1/1/1965 and Newer), (420, 532, 535 ALL 1/1/1975 and newer), 455 (7/1987 to 11/1988), with power reverse transmission. Replaces 530718M92, C5NN7A103F, D2NN7A103A, E4NN7A103AA, 86516596. (Item #: 170901, Ref: 86516596) $302.00

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Item #: 155727, Ref: C5NN77086A) $5.90

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $6.50

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA) $91.00

Transmission Rebuild Kit - This Transmission Rebuild Kit is for 600, 700, 800, 900 Series, 2000, 4000 using 4-speed transmissions (1955-1964). This Transmission Bearing and Seal Kit contains seals, bearings and gaskets required for transmission rebuild. (Item #: 178958, Ref: TSBK5564) $354.00

Electrical System

12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Item #: 103142, Ref: 5564-10300ALT) $147.00

12 Volt Conversion Kit - For tractor models 2000 3 Cylinder, 3000 3 Cylinder, 4000 3 Cylinder, 5000, 7000. 1965 and up, Gas and Diesel. Converts 6-volt systems to 12-volt and updates older 12 volt tractors- Replaces Lucas Generator. Includes new unicharge alternator (12 Volt, 63 Amp, Internally Regulated) with pulley and internal self exciting regulator, brackets, wiring harness and instructions. Includes Tach Drive. Replaces 87406904R. (Item #: 150227, Ref: 6X10300ALTH) $210.00

Alternator - This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000, 600, 700, 800, 900. Also used with many other models for 12 volt conversion. Replaces 5564-10305SE. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Adjustable Arm - Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Item #: 172574, Ref: NAA10303) $20.30

Alternator Adjuster Arm Bracket - For Ford tractor models 2000, 3000, 4000, 5000, 7000, Steel, 5.5mm Thick, (1) 8.8mm Unthreaded Hole, (1) 8.5mm x 90mm Slot, 155mm OAL, (Item #: 164220) $10.90

Alternator Adjuster Bracket - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 6mm Thick, (1) 10.7mm Unthreaded Hole, (1) 8.5mm x 92mm Slot, 230mm OAL, (Item #: 164215) $14.50

Alternator Adjuster L Bracket - For Ford tractor models 2000, 3000, 4000, 5000, 7000, Steel, 4mm Thick, (1) 8.4mm Unthreaded Hole, (1) 8.5mm x 92mm Slot, 180mm OAL, (Item #: 164219) $11.98

No
Picture
Alternator Conversion Wiring Harness - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Number of Wires: 7, Additional Handling and Oversize Fees Apply To This Item, (Item #: 164235) $24.98

Alternator Conversion Wiring Harness - For Ford tractor models 2000, 3000, 4000, 5000, 7000, (Item #: 164237) $11.20

No
Picture
Alternator - Delco Style (12396) - For Ford tractor models 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 961, 971, 981, 2000 (4-cylinder), 4000 (4-cylinder), Replaces manufacturer number ADR0188, 400-12396, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 63 Self Exciting, Clock Position: 3, 1-Wire System, 13mm Wide Pulley, (Item #: 164229) $122.00

Alternator Mounting Bracket - For Ford tractor models 2000, 3000, 4000, 5000, 7000, Steel, 10.2mm Thick, (3) 13mm Unthreaded Holes, (2) 10.5mm Unthreaded Holes, (1) 3/8-16 x 3.5" Bolt, (1) 3/8-16 Nut, (1) 15.8mm x 11.3mm Spacer, (Item #: 164218) $19.30

Alternator Mounting Bracket, NAA10302 - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 9.5mm Thick, (2) 13mm Unthreaded Holes, (2) 10mm Unthreaded Holes, (Item #: 164214) $20.10

Alternator with Tach Drive - The is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. See kit 6X10300ALTH. Used on Ford Tractors 1965 and later. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $147.00

Battery Cable - Battery Cable less boot, 36-1/2 inches long, battery to relay, 2 Gauge. For tractor models 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5200, 5600, 5610, 6600, 6610, 7000, 7610. (Item #: 191470, Ref: D2NN14300C) $36.25

Battery Cable - This Battery Cable is 34 inch, 4 Gauge, and usually used as battery to ground. For 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4600, 4610, 5000, 5110, 5600, 5610, 5910, 6410, 6600, 6610, 6810, 7600. (Item #: 115773, Ref: C7NN14301C) $20.70

Battery Cable - This Battery Cable is 14 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Item #: 172920, Ref: D1NN14301G) $20.70

Battery Cable - For (600, 700, 800, 900), (2000, 4000 before 1964). Starter to Battery Cable. 12 Volt, 17 inches Long. (Item #: 178605, Ref: 311228) $16.50

Battery Cable, Right Angle - Cable, battery to starter switch, 12-volt, 12-1/2 inches. For tractor models 2000, 4000, 501, 601, 701, 801, 901. (Item #: 134074, Ref: D1NN14300F) $13.50

Battery Hold Down - Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126636, Ref: NCA10728WN) $5.80

Battery Tray - 73 and 80 Amp Battery - For Ford tractor models 2000 (gas), 2100 (gas), 2110 (gas), 2120 (gas), 2300 (gas), 2310 (gas), 2310 (diesel), 2600 (diesel), 2610 (diesel), 2810 (diesel), 2910 (diesel), 3000 (gas), 3055 (gas), 3100 (gas), 3110 (gas), 3120 (gas), 3150 (gas), 3300 (gas), 3310 (gas), 3330 (gas), 3400 (gas), 3600 (diesel), 3610 (diesel), 3900 (diesel), 3910 (diesel), 4000 (gas), 4100 (gas and diesel), 4110 (gas and diesel), 4140 (gas), 4200 (gas), 4330 (gas), 4340 (gas), 4400 (gas), 4410 (gas), 4600 (diesel), 4600SU (diesel), 4610 (diesel), 4610SU (diesel), 5000 (gas), 5100 (gas), 5110 (diesel), 5200 (gas), 5340 (gas), 5600 (diesel), 5610 (diesel), 5900 (diesel), 6410 (diesel), 6600 (diesel), 6610 (diesel), 6810 (diesel), 7000 (diesel), 7100 (diesel), 7200 (diesel), 7600 (diesel all 1966-later), Compatible with Ford Construction and industrial models 230A (diesel), 231 (diesel), 233 (diesel), 234 (diesel), 333 (diesel), 334 (diesel), 335 (diesel), 420 (diesel), 515 (diesel), 530A (diesel), 531 (diesel), 532 (diesel), 535 (diesel), 3500 (gas), 3550 (gas), 4500 (gas all 1966-later), Replaces Ford OEM number D3NN10723A, 81837763, C5NN10N650A, C9NN10723B, For 73 or 80 amp battery, Dimensions: 17-1/2" x 8", Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155837) $75.00

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5/8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Item #: 182920, Ref: 1A13377A) $2.70

Cable, Starter to Switch - Switch to starter cable, 16 inches long. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Item #: 115783, Ref: 9N14431B) $10.00

Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Item #: 105282, Ref: D8JL12029A) $13.50

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Item #: 105281, Ref: D4PE12029AA) $14.00

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref: 8BA12029) $26.30

Coil Wire Assembly - This Coil to Distributor Wire is exactly like the original, with molded ends. Used on Ford 4 Cylinder tractors from 1955-1965. Replaces original part number FDN14302A. (Item #: 182945, Ref: FDN14302A) $11.10

Complete Tune-up Kit - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas), Replaces Ford OEM number 309787, Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set, (Item #: 116748) $57.00

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Item #: 111198, Ref: FET12300A) $4.90

Condenser - For Ford tractor models 2000, 2600, 3000, 3600, 4000, 4100, 4600, 5000, 5600, 6600, Replaces Ford OEM number C5NF12300A, 21A255, (Item #: 111778) $6.20

Distributor - With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Comes with Points and Cap. Replaces 311185. Can use Pertronix Electronic Ignition number 1244A if desired. (Item #: 105328, Ref: FDN12127A) $105.00

Distributor Assembly, Complete - This new, Complete Distributor is an improved design using a Mechanical Advance. Replaces original vacuum advance distributors. Fits Ford 3 cylinder tractors from 1965-1980. Fits 2000, 2100, 2110, 2120, 2150, 2300, 230A, 2310, 234, 2600N, 2600R, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3910H, 3910N, 3910R, 4000, 4100, 4110, 4110N, 4140, 420, 4200, 4330, 4340, 4400, 445, 445A, 450, 4500, 4600NO, 4600O, 4600SU, 4610N, 4610NO, 4610O, 4610SU. Tune-up parts interchange with the original. Replaces 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA. (Item #: 153416, Ref: F1NN12100AA) $119.00

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Item #: 111462, Ref: 7RA12132A) $5.50

Distributor Bushing - For Ford tractor models NAA, 8N (s/n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 7RA12233, For 4 cylinder models, (Item #: 111466) $3.30

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Item #: 178573, Ref: FDS3253) $39.00

Distributor Cap - Distributor Cap for 3-cylinder engine on: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Item #: 105528, Ref: C5NF12106A) $11.50

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Item #: 100012, Ref: NCA12106A) $9.00

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref: 7RA12144) $4.60

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref: B12145) $1.30

No
Picture
Distributor Driven Gear - For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Item #: FAD12390A) $44.89

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Item #: 105527, Ref: FAA12239A) $5.00

Distributor Dust Cover Assembly - Dust Cover Assembly for Distributor Breaker. For 3 and 4 cylinder gas engines. Tractors with Motorcraft Distributor: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 and up). Replaces C5NF12239A. (Item #: 111145, Ref: C7NF12239A) $24.00

No
Picture
Distributor Dust Cover Seal - Seal for part number C7NF12239A. Replaces: 238-5147; 47107952; 70926559; V120471; X3430402; 190003120871; 379225S91; 383018R1; 81816534; 83972230; 87148S91; 87759736; 87760685; V48164 (Item #: 179771, Ref: S.11453) $1.60

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Item #: 111315, Ref: D8NN12171AA) $3.70

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref: 350032-KIT) $7.00

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref: 8N12209) $5.80

Distributor, Rebuilt - Complete Remanufactured Distributor for Ford 3 cylinder tractors from 1965 to 1980 with distributor 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA, C5NF12127B. Does not include the Vacuum Advance. Vacuum Advance is not available. F1NN12100AA is available new with a Mechanical Advance. A refundable $100.00 core charge will be added to your order. (Item #: 203560, Ref: C7NF12127D) $295.01

Distributor Rotor - Rotor. Fits 2000, 3000 and 4000 1965 and up. Fits 2600, 3600, 4100 and 4600 1975 and up. Fits 5000 1965-1975. Fits 5600, 6000 1975 and up. Replaces 21A355, C5NF12200A, 500868, C5NF12200AGV. (Item #: 111779, Ref: C5NF12200A) $4.50

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref: 8N12213) $3.60

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 111317, Ref: C0NN12200A) $3.10

Distributor Screw - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 350032S, For 4 cylinder models, (Item #: 111467) $3.98

Distributor Seal - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number D8NN12A118AA, FAA12476A, For 4 cylinder models, (Item #: 111463) $6.10

Electronic Ignition Conversion Kit - 12V Neg (3 cyl eng) - Pertronix Electronic Ignition kit for the following tractors using 3-cylinder gas engine: 2000, 2100, 2110, 3000, 3100, 3400, 4000, 4100, 4140, 4200. Distributor Dust Cover is not used with this kit. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105078, Ref: 1231) $145.00

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105079, Ref: 1244A) $140.00

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Item #: 182576, Ref: 1244AP12) $152.00

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Item #: 182507, Ref: 1244AN6) $169.00

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 105080, Ref: 1244AP6) $165.00

Fuse Box Assembly - Eight amp, six fuse, fuse box. For tractor models (2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100 all 8/1970 and up without hazard warning indicators), (4330, 4340, 5000, 5100, 5340, 7000 all 8/1970 and up without cab or hazard warning indicator), (3110 5/1973 and up without cab or hazard warning indicator), (4140 5/1973 and up without hazard warning indicator) Replaces C9NN14N030B. (Item #: 172533, Ref: D2NN14N030A) $31.70

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Item #: 112273, Ref: 376852R91) $10.90

Generator - 12 volt, 22 amp. For tractor models (620, 622 1967-74), (2000, 3000 1965-75 with 3-158 dsl), (3000 1965-68 with 3-175 dsl), (4000 1965-72 with 3-192 or 3-201 dsl), (5000 1965-76 with 4-233 or 4-256 dsl), (7000 1971-75 with 4-256), (8000 1968-87 with 6-401 dsl), (9000 1970-72 with 6-401 dsl). All Lucas equipped. Replaces 22756. Does not include pulley. (Item #: 116881, Ref: GLU0001) $98.00

Generator - New LUCAS type Generator 12 volt, 22 amp, 1965 to 1975, less pulley. 2000, 3000, 4000, 5000 Gas and Diesel. (620, 622 1967-1974). (7000 1971-1975 with 4-256). 1968 All 8000, 9000 series (up to 12/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley. Pulley is available (see part number C5NF10196B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A, C4NN10002B. The Generator can also be used as a 12 volt generator on 1955-1965 4 cylinder tractors. NOTE, this is not the same style generator used on 1955-1964 tractors. It can be used to replace a 6 volt generator on 1955-1964 tractors and convert them to 12 volt positive ground system. Includes tach drive. (Item #: 140527, Ref: C7NN10000C) $110.00

Generator Brush - For 6 volt generators on models: 600 series, 601 series, 700 series, 701 series, 800 series, 801 series, 900 series, 901 series, NAA, 2000 4 cylinder, 4000 4 cylinder. Replaces GFD7502, 142-14002, F-14, 027-504, 34450-501, C0AZ-10069-B, B4AZ-10069-A, FBN10069A, B4A-10043-A, C0AZ-10043-A, C0AF-10069-A, FAA10069A, B6A-10043-B, 01A-10069, 2900345, 0A-10069, 3B-7504 (Item #: 185288) $2.20

Generator, Pulley - 15 mm (0.591 inch) Keyed Hub, 3 1/2 inch outside diameter. Uses 1/2 inch belt. For tractor models 1965-1975 2000, 3000, 4000, 5000, gas and diesel, 1968 All 8000, 9000 series (up to 12/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Fits generators C7NN10000C and C5NF10000E. (Item #: 157972, Ref: C5NF10196B) $13.20

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Item #: 182496, Ref: GRK401) $41.60

Glow Plug - Used in 144, 172 and 192 cubic inch 4 cylinder diesel engines, two of these glow plugs fit into 310659 intake manifold. Used from 1957-1964 these glow plugs replace Ford part numbers 86550509 and D8NN9A36AA. These engines were used on Ford Models 1801, 1811, 2000, 2030, 2031, 4000, 4030, 4040, 4130, 4140, 501, 541, 601, 621, 641, 651, 661, 671, 701, 741, 771, 801, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (Item #: 167679, Ref: D8NN9A36AA) $45.00

Hold-down, Battery Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600 (& N, R, V), 3000 (Series), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4500, 4600, 4600SU, 5000 (Series), 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000 (Series), 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 250C, 260C, 333, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 455, 455C, 455D, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, Replaces Ford OEM number D6NN10716C, 83925344, For 128Ah 4DLT Diesel Battery, (Item #: 176620) $94.00

Ignition Key Switch - 5 Position, 7 Terminal - For Ford tractor models TW10, TW30, 650, 2000 (3 Cyl), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3310, 3330, 3400, 3600, 3610, 3910, 3930, 4000 (3 Cyl), 4100, 4110, 4600, 4630, 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6600, 6610, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Compatible with Ford Construction and industrial models 515, 531, 535, 550, 3500, 4400, 4500 Replaces Ford OEM number 82849085, C5NN11N572A, C5NN11N501A, D5NN11N501A, E8NN11N501AA, E7NN11N501AB, E7NN11N501AC, 82849165, D5NN11572A, , Compatible with New Holland tractor models 3010S, 8010, Replaces New Holland OEM number 82849085, For gas and diesel with or without cold start, 5 Position 7 spade Switch, Threaded stem measures 3/4 - 27, (Item #: 124296) $13.20

Ignition Kit With Rotor - 4 Cylinder - Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Item #: 100011, Ref: ATK7FAR) $9.50

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $9.80

Ignition Switch, Keyed - This three position Ignition Switch has 5 terminals. Gas or diesel without cold start.It is widely used on Ford / New Holland Tractors 1965 and later. Comes with 2 keys. Replaces C5NN11N572A, D3NN11N572A, 81806736, 81838693, 82849165. (Item #: 185146, Ref: D3NN11N572A) $18.10

Ignition Tune-up Kit, Complete, 3-Cylinder - Fits original Motorcraft Distributor. Kit includes, points, condenser, rotor, distributor cap, dust cover, custom fit spark plug wires, 3 Autolite AL405 spark plugs. 3 cylinder models only. Verify correct spark plug size and type. Compatible with Ford Construction & Industrial(s) 230A, 231, 234, 334, 340, 340A, 420, 445, 515, 530A, 531, 535, 540, 540A, 545, 550, 555. Compatible with Ford Tractor(s) 2000, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4400, 4500, 4600, 4610. (Item #: 158887, Ref: FD3CYLTK) $82.00

Manifold Heater - Thermostart Intake Manifold Heater. Diesel cold weather starting aid. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710. Replaces C5NE9A436A, E1NN9A436AA, 603922, 87800843, 83933675, 81806046 (Item #: 118792, Ref: 3583543M2) $11.50

Neutral Safety Starter Switch - For Ford tractor models 2000, 2100, 3000, 3100, 3400, 4000, 5000 (all with 4 speed transmission), Compatible with Ford Construction and industrial models 420, 445, 532, 535, 545, 3500, 3550, 4500 (all with torque converter transmission), Replaces Ford OEM number 81817901, C7NN7A247A, Spade hook up, (Item #: 126771) $14.50

Oil Pressure Sending Unit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2600, 2610, 3000, 3230, 3310, 3400, 3500, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4830, 5000, 5600, 5640, 5700, 6000, 6600, 6610, 6640, 6700, 7000, 7600, 7610, 7700, 7740, 7810, 7840, 7910, 8000, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340A, 340B, 345C, 345D, 445, 445A, 445D, 455D, 515, 531, 532, 535, 540, 540A, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 655, 655A, 655C, 655D, 675D, 675E, 775, 3500, 4500 Replaces Ford OEM number D8NN9278BB, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278F, F0NN9278AA, F1NN9278AA, C8NF9278B, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TS90, TS100, TS110, Replaces New Holland OEM number 82028130, 81873524, (Item #: 121174) $7.20

Point Set - For Ford tractor models 2000, 2600, 3000, 3600, 4000, 4100, 4600, 5000, 5600, 6600, Replaces Ford OEM number C5AF12171C, 21A155, C5AF12171BVA, 1965 and up, (Item #: 111780) $6.20

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Item #: 105710, Ref: 8NE10306) $3.70

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. For tractor models 1965 and up 2000, 3000, 4000, 1975 and up 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch gas engines. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type. (Item #: 111743, Ref: AL295) $4.00

Spark Plug - For 3 cylinder engines For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. (Item #: 130073, Ref: AL405) $4.70

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Item #: 130072, Ref: AL437) $3.10

Spark Plug - 3 Cylinder Engines. For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Price shown is for each, sold only in multiples of 4 items. (Item #: 112206, Ref: AL216) $4.00

Spark Plug Wire Set - 3 Cylinder, Custom - Premium quality leads have OEM style boots, are silicone with stainless steel core and are custom cut to length for 3-cylinder gas engines (1965 and newer) on: 2000, 2600, 3000, 3600, 3610, 4000, 4600. (Item #: 180790, Ref: DHPN12259A) $36.00

Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. USA. Plug Wire Lengths: 6 inches, 8 inches, 11-1/4 inches, 17 inches. Coil Wire Length: 11-1/4 inches. (Item #: 155171, Ref: CPN12259CUSTOM) $16.60

Starter - New Starter with Drive for Gas Engine 1965 and later, on: 2000, 2030, 3000, 4000, 4110, 2600, 3600, 4600, 2610, 3610, 4610, 230A, 231, 234, 334, 335, 340, 340A, 3400, 3500, 420, 4400, 4500, 445, 530A, 531, 535, 540A, 545, 550, 555. Replaces S-2014, SFD0089, C5NF-11001-B, C5NF11001B, C7NF-11001-B, C7NF11001B, D0NF-11001-A, D0NF11001A, D1NN-11001-A, D1NN11001A, D7NN-11001-A, D7NN11001ARXL, HD7NN11001AR, SA-640, SA640, SG-0060R, S4531, 1100-0112, 2-1813-FD, 3130, 3139, 3139N, 41-3139, 410-14005R, 44-4232, 62006, 72-3139, 91-02-5799, 99000 (Item #: 111095, Ref: D7NN11001A) $100.00

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Item #: 126654, Ref: 8N11113) $5.00

Starter, Diesel Engines - With single contact solenoid, 12 volt, 10 tooth, CW rotation. For tractor models TW10, TW20, TW25, TW30, TW35 1979-1983 with 6-401, 2000, 3000 1965-1975, 2310 1982-1985, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 with 3-158, 2910 1983-89 with 3-175, 3000 1965-68 with 3-175, 3230 1990-95 with 3-192, 3430 1990-98 with 3-192, 3610 1982-83 with 3-192, 3910 1983-90 with 3-192, 3930 1990-96 with 3-201, 4000 1965-72 with 3-192 or 3-201, 4100 1978-81 with 3-183, 4110 1977-83 with 3-201, 4630 1989-96 with 3-201, 1990-99 with 3-192 diesel, 5000 1965-76 with 4-256, 5030 1992-96 with 4-256, 5600 1975-81 with 4-256, 5610 1981992 with 4-256, 5900 1985-93 with 4-256, 6600 1975-81 with 4-256 diesel, 6610 1982-92 with 4-268, 6700 1975-81 with 4-256, 6710 1982-85 with 4-256, 7000, 7100, 7200 1971-75 with 4-256), 7400 1975-76 with 4-256, 7600, 7700 1975-81 with 4-256, 7710 1982-91 with 4-268, 7810 1978-91 with 6-401, 8000 1968-87 with 6-401, 8210 1978-91 with 6-401. Replaces 26395, 26211, 26339A, SLU003. (Item #: 100300, Ref: SLU0002) $160.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $165.00

Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 110819, Ref: C1AF11350A) $29.30

Starter Drive - Starter Drive Assembly. For 2000, 3000, 4000, 5000. (Item #: 156511, Ref: D2NN11350B) $21.40

Starter Drive - Starter Drive for TISCO 5 inch diameter starter replacement for D8NN11000CE. Does not fit Ford original D8NN11000CE. Will service original 4-1/2 inch diameter Ford starter D8NN11000DA. For 2000, 230A, 231, 233, 234, 3000, 333, 334, 335, 4000, 530A. (Item #: 179782, Ref: D2NN11350C) $165.04

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Item #: 119934, Ref: E4NN11350AA) $29.20

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $28.40

Starter - Ford Style DD without Drive (3110) - For Ford tractor models NAA, 501, 541, 601, 611, 621, 631, 640, 641, 651, 660, 661, 671, 681, 701, 740, 741, 771, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 901, 941, 951, 960, 961, 971, 981, 2000, 2031, 2120, 4000 (Diesel), 4030 (Diesel), 4031 (Diesel), 4130 (Diesel), 4131 (Diesel), 4140 (Diesel), Compatible with Ford Engine (s) 134 (4 Cyl), 172 (4 Cyl), Replaces Ford OEM number B5C11002A, C3NF11001A, C3NF11002D, C3NF11002DR, FAC11000, FAC11001, FAC11001B, FAC11001G, FAC11001H, FAC11001M, FAC11001P, FAC11002, FAC11002B, FAC11002G, FAG11002G, FAG11002M, Replaces manufacturer number 3110, 150-028, 1728948, 91-02-5787, Starter drive gear not included, Ford Style Direct Drive without Drive Gear, Voltage: 6, Rotation: Clockwise, Shaft Length: 5-3/4", Mounting Type: Flange, Mounting Holes: 3, For a New version of this sku use Item #: 203140, (Item #: 112200) $121.00

Starter - Ford Style DD without Drive (3115) - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000, Compatible with Ford Construction and industrial models 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040, Replaces Ford OEM number B6A11002A, C3NF11002E, FAR11001A, FAR11002A, C3NF11002CR, Replaces manufacturer number 150-029, 3115, 44-4230, 44-9602, 44-9609, 44-9619, SA-519, SA-519A, SA-622, 91-02-5788, Starter drive gear not included, Ford Style Direct Drive without Drive Gear, Voltage: 12, Rotation: Clockwise, Shaft Length: 5-3/4", For Solenoid use Item #: 112209, (Item #: 112210) $123.00

Starter Less Drive - Ford Style DD (3110), Remanufactured, B5C11002A - For Ford tractor models NAA, 501, 541, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 701, 740, 741, 771, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 901, 941, 951, 960, 961, 971, 981, 2000, 2031, 2120, 4000, 4130, 4131, 4140, Replaces Ford OEM number B5C11002A, C3NF11001A, C3NF11002D, C3NF11002DR, FAC11000, FAC11001, FAC11001B, FAC11001G, FAC11001H, FAC11001M, FAC11001P, FAC11002, FAC11002B, FAC11002G, FAG11002G, FAG11002M, Replaces manufacturer number 3110, 150-028, 1728948, 91-02-5787, Ford Style Direct Drive, Voltage: 6, Rotation: Clockwise, For a New version of this sku use Item #: 112200, (Item #: 203140) $257.01

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref: A9AZ11102B) $8.80

Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Item #: 183911, Ref: SRK403) $33.90

Starter Safety Switch - Safety Starter Switch. For 2000, 2100, 3000, 3100, 3400, 3500, 3550, 4000, 420, 445, 4500, 5000, 532, 535, 545. Replaces C7NN7A247B, 81825189, 314120, 237296, 81812983, C5NN7A247B (Item #: 121160, Ref: C7NN7A247B) $11.90

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Item #: 115052, Ref: C7NN7A247A) $15.10

Starter Safety Wire Assembly - For tractor models (2000, 3000, 4000 with 6 or 8 speed trasnmissions 10/1966 to 1975), 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Replaces D4NN7A488B, D4NN7A488BB, E4NN7A488BB, E4NN7A488CA, 81827298, 83948129, 83963950 (Item #: 125405, Ref: D4NN7A488BB) $17.30

Starter Solenoid - For 2000, 3000, 4000, 5000, 3900, 3910, 4100, 4600, 5600, 6600, 7700 With 5 inch starter (Item #: 105691, Ref: D7NN11390B) $36.00

Starter Solenoid - For Starter D8NN11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12/1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (1981-1983), 2810 (1984-1990), 2910 (1983-1990), 3310 (1965-1974), 4000 series (1965-1974), 4100 (1975-1981), 4110 (1981-1990), 4600 (1975-1981), 4610 (1981-1990), 5340 (1968-1974) 6600 gas 1975-1981, 7000 series (1971-1974). NOT FOR D8NN11000CE 5 inch starter. (Item #: 119935, Ref: D7NN11390A) $33.00

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. Insulated Base, does not ground through mounting bracket. Will work in tractors converted from 6 to 12 volts, using a 4 post solenoid. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Item #: 105690, Ref: 311007) $18.30

Starter Solenoid Assembly - New Solenoid Assembly for Ford original D8NN11000CE Starter 5 inch diameter. Does not fit TISCO D8NN11000CE. Fits 5000 Gas and Diesel 2000 and 4000 Diesel. (Item #: 113982, Ref: E4NN11390AC) $64.00

Starter Solenoid, Isolated Base - This 12 volt, 4 post Starter Solenoid is for the following 1964 and earlier models: 1800, 1801, 1811, 1841, 1871, 1881, 2000, 2030, 2120, 4000, 4030, 4040, 4140, 4120, 4130, 4140, 501, 6000, 601, 701, 801. Does NOT ground through base. Used for 12 volt converted systems and 4 cylinder diesels, 1958-64 except Lucas equipped. For a 12 volt grounded base, use part number 105689 (Item #: 112395, Ref: 311006) $13.40

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Item #: 105685, Ref: 8N11500WG) $15.10

Starter with Drive - This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Item #: 112209, Ref: C3NF11002D) $115.00

No
Picture
Starter with Drive - 12 Volt - 9 teeth, clockwise rotation. For 4000 4 CYL, 4030 1961-62, 4031 1960-62, 4040 1961-62, 4110TR 1963-64, 4120, 4121, 4130 4 CYL 63-64, 4131, 4140 4 CYL 63-64, 501, 541, 600, 6000, 601, 611, 620, 621, 630, 631, 640, 641, 650 1955-57, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Jubilee, NAA. (Additional refundable $50 core charge). (Item #: 203616, Ref: C3NF11002CR) $331.01

Switch, Push Button - Fits 2000, 4000, 601, 701, 801, 901. All 4 Cylinder, Pre 1965 with select-o-speed transmission or diesel engine. Replaces 312133. (Item #: 105703, Ref: 189158M91) $11.10

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Item #: 165423, Ref: 8NNN14448A) $9.30

Tune-up Kit, Basic - This basic tune-up kit contains points, condenser, rotor. For 3 cylinder gas tractor models: 2000, 3000, 4000 from 1965 and up, 2600, 3600, 4100, 4600 from 1975 and up. (Item #: 105524, Ref: ATK6FXR) $12.20

Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune-up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Item #: 183923, Ref: 309787) $23.20

Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 3 cylinder gas tractor models 1965 and later. 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Tune-up kit, contains point set, condenser, rotor and (3) Autolite AL405 spark plugs. Verify correct spark plug size and type. (Item #: 183788, Ref: 309788) $27.10

Voltage Instrument Stabilizer - For (2000, 3000, 4000, 5000, 7000, 1965-1975), (2600, 3600, 4100, 4600, 5600, 6600, 7600, 1976 to 1981). Voltage Stabilizer for instrument cluster replaces C5NN10N507A. (Item #: 125560, Ref: C7NN10N507A) $22.20

Voltage Regulator - For 2000, 3000, 4000, 5000, 7000. Control box (Voltage Regulator) - 11 Amp. Replaces C7NN10505A, 81818814, 82847720, C7NN10505D. (Item #: 105539, Ref: C7NN10505D) $23.30

Voltage Regulator, 12 Volt 22A Generator - For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Item #: 105538, Ref: C0NF10505A) $37.00

Voltage Regulator, 6 Volt - This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 105537, Ref: FAG10505A) $33.00

Wiring Harness - Built exactly like the original, this is a complete wiring harness kit is used on Ford 3-cylinder gas, 1965 and up with generator systems. Used on Ford 3000, 2100, 2110, 2120, 2150, 2300, 2310, 2000, 4000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000SU, 4100, 4110, 4140, 4190, 4330, 4340. Replaces C5NN14A103AF, C5NN14A103AJ, C5NN14N104R, C5NN14N104T, C5NN14N105A, C9NN14A103B (Item #: 179715, Ref: C5NN14A103AFKIT) $605.00

Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Item #: 164238, Ref: NAA10301) $17.50

Wiring Harness, 12 Volt System - Ignition Wiring Harness is for tractors made from 1958 to 1964 with an original 12 volt system. 2000 and 4000 4 cyl gas series, 501, 601, 701, 801, 901. Main wiring harness 1958 thru 1964 with original 12 volt system. (Item #: 172853, Ref: 311043) $54.00

Wiring Harness, 6 Volt System - Ignition Wiring Harness. For gas and diesel for 2000, 4000, 501, 601, 701, 801, 901. 6 volt systems 1958 to 1964. (Item #: 105716, Ref: 310996) $19.70

Wiring Harness, for Generator, 12 Volt - This 2 Piece set is for 12 Volt, Diesels using a generator (1965-74): 2000, 3000, 4000. Also replaces C5NN14N104R. Must be used as a set - will not plug into original harness. (Item #: 113582, Ref: C9NN14A103B) $54.00

Engine Bearings

No
Picture
Ball Bearing - Power Steer Gear Assembly - For Ford tractor models Dexta, Super Dexta, 2310, 2600, 2810, 2910, 3230, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5610, 6600, 6610, 6710, 7000, 7100, 7410, 7600, 7610, 7710, Compatible with Ford Construction and industrial models 234, 334, 532 Replaces Ford OEM number C9NN3647A, 119811ES, , Compatible with Massey Ferguson tractor models 35, 35X, 135, 148, 230, 240, 250, Replaces Massey Ferguson OEM number 3900187M1, 3711715M1, 354466X1, 2971X, Replaces New Holland OEM number 81822004, Size: 5/16", Material: Carbon Steel, (Item #: 168936) $0.50

Camshaft Bearing - Single Camshaft Bearing fits the following gas and diesel tractors 1965 and up: 2000, 3000, 2600, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 7610, 7710, 8000, 8200, 8600, 8700, TW10, 9000, 9200, 9600, 9700. (Item #: 106297, Ref: C5NE6261B) $6.20

Connecting Rod Bearing - .020" Oversize - Journal - For Ford tractor models 2000 (1965-1975), 2100, 2110, 2111, 2130, 2131, 2150, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3420, 3430, 3500, 3510, 3600, 3610, 3900, 3910, 3930, 4000 (1965-9175), 4030, 4031, 4110, 4120, 4130, 4330, 4340, 4600, 4610, 4630, Compatible with Ford Construction and industrial models 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 3550, 4010, 4040, 4140, Compatible with Ford Engine (s) 158 (gas or diesel), 175 (gas or diesel), 192 (gas or diesel), Replaces Ford OEM number CFPN6212D, Bearing Size: .020" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106313, (Item #: 106311) $9.00

Connecting Rod Bearing - .030" Oversize - Journal - For Ford tractor models 2000 (1965-1975), 2100, 2110, 2111, 2130, 2131, 2150, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3420, 3430, 3500, 3510, 3600, 3610, 3900, 3910, 3930, 4000 (1965-9175), 4030, 4031, 4110, 4120, 4130, 4330, 4340, 4600, 4610, 4630, Compatible with Ford Construction and industrial models 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 3550, 4010, 4040, 4140, Compatible with Ford Engine (s) 158 (gas or diesel), 175 (gas or diesel), 192 (gas or diesel), Replaces Ford OEM number CFPN6213D, Bearing Size: .030" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106313, (Item #: 106312) $6.80

Connecting Rod Bearing - .040 - For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Bearing Size: .040" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106265, (Item #: 106266) $6.50

Connecting Rod Bearing - Standard - Journal - For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Replaces Ford OEM number 312026, 4P9944, Bearing Size: Standard, Sold per journal, (Item #: 106261) $12.50

Main Bearings - .010" Oversize - Set - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Compatible with Ford Engine (s) 134, 172, Replaces Ford OEM number EAF6342F, EAF6331D, Bearing Size: .010" Oversize, Sold in complete sets, For Standard main bearing use Item #: 106272, (Item #: 106269) $39.20

Main Bearings - .040" Oversize - Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2120 (1/65-12/74), 2300 (1/65-12/74), 2310 (1/65-12/74), 2310 (3/82-12/83), 2600 (1/75-12/81), 2600 (N, R, 1/75-12/81), 2600 (V, 10/75-9/96), 2610 (1/81-4/83), 2610 (V, 1/81-2/90), 2810 (1/84-2/90), 2910 (5/83-2/90), 3000 (1/65-12/74), 3055 (1/65-12/74), 3100 (1/65-12/74), 3120 (1/65-12/74), 3190 (1/65-12/74), 3230 (3/90-9/93), 3300 (1/65-12/74), 3310 (1/65-12/74), 3330 (1/65-12/74), 3400 (1/65-9/75), 3430 (3/90-1/98), 3500 (1/65-12/74), 3550 (1/65-12/74), 3600 (1/75-12/81), 3600 (N, NO, V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610 (V, 1/81-4/83), 3610 (8/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (5/83-2/90), 3910 (H, N, 1/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 3930 (3/90-7/99), 3930 (H, 3/90-8/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4110 (1/81-2/90), 4110 (V, 1/81-2/90), 4110 (NO, O, 1/81-2/90), 4110 (N, 12/81-2/90), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4140 (1/65-12/74), 4190 (1/65-12/74), 4200 (1/65-12/74), 4330 (1/65-12/74), 4340 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 4500 (1/65-12/74), 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-7/81), 4610 (1/81-2/90), 4610 (V, 1/81-2/90), 4610 (NO, O, 1/81-2/90), 4610 (N, 1/81-2/90), 4610SU (8/81-2/90), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-later), 4830 (7/90-5/94), 4830 (N, O, 7/90-5/94), 5000 (1/65-1/75), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), 5100 (1/65-12/74), 5110 (5/84-10/91), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (Mexico, 5/85-12/93), 6410 (UK, 1/81-12/91), 6500 (3/73-10/75), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 6810 (4/89-10/91), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7410 (4/89-10/91), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7610 (1/81-10/91), 7610 (O, 10/81-12/91), 7700 (1/75-12/80), 7710 (1/81-10/91), 7810 (2/88-10/91), 7810 (O, 2/88-10/91), 7910 (1/82-10/91), 8000 (1/68-12/98), 8200 (1/68-12/98), 8210 (1/82-10/91), 8400 (1/71-9/72), 8530 (3/90-12/93), 8600 (10/72-7/76), 8630 (3/90-12/93), 8700 (8/76-12/78), 8730 (3/90-12/93), 8830 (3/90-12/93), 9000 (1/69-12/78), 9200 (1/69-9/72), 9600 (10/72-7/76), 9700 (8/76-12/78), Compatible with Ford Construction and industrial models A62 (1/74-12/83), A62 (5, Europe, 1/74-12/84), A64 (1/74-12/83), A66 (1/74-12/83), 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 250C (9/89-12/94), 260C (9/89-12/94), 333 (1/75-12/81), 334 (1/81-4/83), 335 (Highway, 1/83-2/84), 335 (10/75-9/78), 340 (3/79-9/81), 340A (10/81-5/85), 340B (6/85-11/88), 345C (12/88-8/92), 345D (9/92-10/00), 420 (10/75-9/78), 445 (1/78-5/85), 445A (6/85-11/88), 445C (12/88-8/92), 445D, 450 (1/87-11/88), 455 (7/87-11/88), 455C (12/88-8/93), 455D (9/92-9/96), 515 (10/75-9/78), 530A (1/81-4/83), 531 (1/75-12/81), 532 (10/75-9/78), 535 (10/75-9/78), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (1/84-11/88), 545C (12/88-8/92), 545D (9/92-12/00), 550 (1/75-9/78), 555 (10/78-10/88), 555A (1/84-5/85), 555B (6/85-10/88), 555C (11/88-8/93), 555D (1/70-12/73), 555D (9/93-7/96), 575D (9/93-7/96), 650 (11/75-12/77), 655 (7/85-10/88), 655A (6/85-10/88), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), 750 (11/75-12/77), 755 (1/78-12/83), 755A (1/84-12/86), 755B (1/87-1/93), Compatible with Ford Engine (s) BSD332 (9/81-later), BSD333 (H, Diesel, 1/81-later), BSD333 (1/81-later), BSD442 (1/81-later), BSD444 (HT, 1/87-later), BSD444 (H, Diesel, 12/86-later), BSD444 (1/81-later), BSD4 (Item #: 166956) $51.00

Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Item #: 182484, Ref: MBK134172-010) $69.00

Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106270, Ref: MBK134172-020) $45.80

Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106271, Ref: MBK134172-030) $38.00

Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106272, Ref: MBK134172-040) $141.00

Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106267, Ref: MBK134172-STD) $42.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .010 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106315, Ref: MBK633-010) $78.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .020 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106316, Ref: MBK633-020) $70.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, .030 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106317, Ref: MBK633-030) $38.00

Main Bearing Set, 158, 175 and 201 Gas or Diesel and 192 Gas, STD - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. (Item #: 106314, Ref: MBK633) $78.00

Piston Pin Bushing - For tractor models NAA, Jubilee, (2000 prior to 1964), 500, 600, 601, 700, 701, (4000 gas from 1962-1964), (800, 900 1955-57), (801, 901 gas 1958-1962). Note, these no longer come with oil hole. It needs to be drilled. 4 Used Per Engine. Sold Individually. Replaces EAA6207A (Item #: 108670, Ref: EAA6207A) $5.90

Rod Bearing, .010 - SINGLE Rod Bearing (.010 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Item #: 106375, Ref: DFPN6211D) $8.70

Rod Bearing, .020 - SINGLE Rod Bearing (.020 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Item #: 106376, Ref: DFPN6211E) $9.90

Rod Bearing, .030 - SINGLE Rod Bearing (.030 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Item #: 106377, Ref: DFPN6211F) $9.90

Rod Bearing, .040 - SINGLE Rod Bearing (.040 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Item #: 106313, Ref: DFPN6211G) $7.56

Rod Bearing Pair, .001 - Rod Bearing Pair for 1 cylinder. .001 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184413, Ref: 312101-PAIR) $13.70

No
Picture
Rod Bearing Pair, .002 - Rod Bearing Pair for 1 cylinder. .002 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184447, Ref: 312102-PAIR) $13.70

Rod Bearing Pair, .010 - Rod Bearing Pair for 1 cylinder. .010 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106263, Ref: 312103-PAIR) $12.80

No
Picture
Rod Bearing Pair, .020 - Rod Bearing Pair for 1 cylinder. .020 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106264, Ref: 312104-PAIR) $11.20

No
Picture
Rod Bearing Pair, .030 - Rod Bearing Pair for 1 cylinder. .030 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106265, Ref: C0NN6211B-PAIR) $11.30

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184403, Ref: CRK312104-020) $46.00

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184520, Ref: CRK312026-030) $128.00

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For tractor models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Item #: 185597, Ref: CRK312026-040) $60.00

Rod Bearing, Standard - SINGLE Rod Bearing (standard size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Item #: 106374, Ref: DFPN6211B) $10.00

No
Picture
Thrust Washer - For Ford tractor models Major, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6000, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8340, Compatible with Ford Construction and industrial models 3500, 3550, 4500, Replaces Ford OEM number 508E4230A, (Item #: 174131) $4.30

Engine Gaskets

Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Item #: 123602, Ref: C7NN6N008B) $6.60

Camshaft Cover Gasket - For Ford tractor models NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number C0NN6A250A, Engines: 134, 172 gas / diesel, (Item #: 150041) $7.90

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $9.50

Crankshaft Oil Seal Packing, Pair - This Crankshaft Oil Seal Packing is the original rope style rear crank shaft seal. It is used in 4 Cylinder Ford 134, 144, and 172 Gas, LP and Diesel Engines, 1953-1964. (Item #: 133438, Ref: EBU6701A) $7.20

Crankshaft Seal, Front - This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Item #: 106273, Ref: EAA6700B) $6.60

Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Item #: 182525, Ref: C0NN6701AKIT) $37.00

Crankshaft Seal, Rear - This Rear Crankshaft Seal is for 3, 4 and 6 Cylinder Engines (some gas and some diesel- not all) in models 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces D5NN6701A, D4NN6701A, C5NE6701A, C5NE6701C2, E5NN6701AA, E5NN6701BA, F0NN6701AA, 3955247, D8NN6701BA, 87802757, 83934345, 83934611, 83955247, 81869937, 83905794, 3952004, 87357537, 83904709, E2NN6010AC, E2NN6010BD, E2NN6701BA, E1NN6010KE, E1NN6010ME, 83952004, E4HN6701AA, E3NN6701BA, E2NN6010CD, E1NN6010GD, E1NN6010FE, 83943999, 83916918, 87800322, 83999513, 81813207 (Item #: 106354, Ref: E5NN6701BA) $14.00

Crankshaft Seal, Rear Pair - Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Item #: 106274, Ref: C0NN6701A) $8.10

Front Crankshaft Wear Sleeve - This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Item #: 184669, Ref: RP301112) $68.00

Full Gasket Set - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 1955-1957) Replaces Ford OEM number CPN6008B, , Compatible with New Holland Hay Cutting (s) 907, 909, Includes crank seals, All with 1/2" bolts, Contains all gaskets necessary for a complete engine overhaul, (Item #: 106276) $92.00

$Ford 4000 Head Gasket 134\172 Gas$
Head Gasket 134/172 Gas - Head Gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Item #: 155277, Ref: EAF6051D) $28.10

Head Gasket, 134CID Gas Engines - Head Gasket, metal clad with 7/16 inch or 1/2 inch head bolt holes. For: NAA, Jubilee, 600, 601, 700, 701, 2000, 4000 with 134 gas engines. (Item #: 182485, Ref: EAE6051DM) $35.80

Head Gasket, 172 Diesel - Head Gasket for 3.9 inch bore in models 4000, 801, 901. (Item #: 172815, Ref: 310662) $33.00

Head Gasket 201 - Head Gasket for 3 Cylinder Diesel for (4000 6/69-1975, (4600 1975-1981), 4610, 4630 non-turbo. (Item #: 160945, Ref: E0NN6051AA) $19.30

Head Gasket Kit, 172 Diesel - Head Gasket for tractor with 3.9 inch bore models 4000, 801, 901, (Upper Gasket Set with Head Gasket). (Item #: 106303, Ref: VG172D) $60.00

Head Gasket Set - For tractor models (4000 series, with 201 diesel engine built between 1965-6/1969)or 4000 with 192 or 201 gas engine. For 1/2 inch Head Bolts (Item #: 106323, Ref: HS3523) $32.00

No
Picture
Lower Gasket Set - Used on 134 CID and 172 CID gas or diesel engines. For tractor models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106345, Ref: CS3477) $71.00

Main Bearing Cap Packing Material, V-Style - For 134 and 173 CID Engines, 1953 to 1964. Sold individually. (Item #: 172567, Ref: B3NN6336A) $3.10

Oil Filter Inlet Tube Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number B9NN6A628A, Oil filter inlet tube cover gasket, (Item #: 160106) $1.50

Oil Inlet Tube Seal - This part replaces Ford/ New Holland numbers 500391 and EAA6594A. It is used on Ford 4 cylinder tractors, 1953-1964. Models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 (Item #: 155434) $0.60

Oil Pan Gasket - Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106281, Ref: EAF6710B) $7.50

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Item #: 106335, Ref: F0NN6710AA) $9.20

Oil Pump Inlet Tube Flange Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6626C, Inlet tube flange cover gasket, (Item #: 160105) $1.90

Oil Pump to Block Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6659A, Oil pump to block gasket, (Item #: 160104) $1.40

Overhaul Gasket Set - For tractor models 4000 (1965 to 3/1968), 4600 (with 192 CID and 201 CID 3-Cylinder Gas 4.4 inch bore), 4000 (with 201 CID 3-Cylinder Diesel 4.4 inch bore). This for a Complete Gasket Set includes Crank Seals. (Item #: 184445, Ref: FS4000) $136.00

No
Picture
Overhaul Gasket Set - 4000 6/1969-1975, 4600 1975-1981, and others with 201 CID Diesel. Overhaul Gasket Set with Crankshaft Seals. (Item #: 172316, Ref: OGS201) $79.00

Overhaul Gasket Set, 172 Diesel - For tractor models 801, 901; 1958 and up, 4000 up to 1964. Overhaul Gasket Kit. (Item #: 106277, Ref: 172-6008D) $120.00

Overhaul Gasket Set, 172 Diesel - Complete Gasket Set includes seals. For 172 diesel in 801, 901, (4000 1964 only). (Item #: 106277, Ref: 3A50FS) $120.00

Overhaul Gasket Set, 172 Gas - For 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit for engine heads that use 7/16 inch head bolts. Includes crankshaft seals. (Item #: 106276, Ref: FPN6008B) $92.00

Overhaul Gasket Set, 172 Gas - For tractor models: 800, 801, 900, 901; 172 CID Gas 1958 and up, 4000 to 1964. Overhaul Gasket Kit for engine heads that use 1/2 inch head bolts. Includes with crankshaft seals.FPN6008B1 (Item #: 106276, Ref: CPN6008H1) $92.00

$Ford 4000 Overhaul Gasket Set Less Head Gasket 134\172 Gas$
Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Item #: 182454, Ref: CPN-FPN) $65.00

Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Item #: 165426, Ref: EAF6521D) $6.70

Pushrod Side Cover Grommet - Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Item #: 165425, Ref: C0NN6589A) $2.50

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.10

Seal - Hydraulic Pump Shaft Oil Seal. Inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For 2000, 4000, 600, 700, 800, 900, NAA. C5NN851A (Item #: 117609, Ref: NCA851A) $6.60

Timing Gear Front Cover Gasket - For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Item #: 172791, Ref: EAF6020B) $2.70

No
Picture
Top Gasket Set - Top gasket set For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. All with 158 CID diesel engine. Does NOT include head gasket. (Item #: 106322, Ref: CFPN6008A) $38.00

Top Gasket Set - Top Gasket Set For 2000, 2600, 3000, 3600, 4000, 4600. All with 3 Cylinder Gas or Diesel Engine. Does NOT include Head Gasket. (Item #: 173007, Ref: CFPN6008B) $27.10

Upper Gasket - Cylinder head gasket set with head gasket For tractor models 4000, 4600. 6/1969-1974 (Item #: 106324, Ref: HS3400D) $31.00

Upper Gasket Set, 172 Gas - For tractor models 800, 801, 900, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket Kit with 1/2 inch head bolts. (Item #: 106302, Ref: VGFPN1) $74.00

Upper Gasket Set, 172 Gas - Upper Engine Gasket Kit. Kit includes EAF6051D, EAF6584C, C0NN9448C. For tractor models 800, 900, 801, 901, 4000 1963 to 1964 with 7/16 inch head bolts. (Item #: 106302, Ref: VGFPN) $74.00

Valve Cover Gasket - For tractor models 4000, 801, 901. All Diesel before 1964. Priced Each. Diesel Engine Only. (Item #: 172740, Ref: 311321) $21.32

Valve Cover Gasket, 3 CYL - Gasket, Valve Cover. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535. (Item #: 128747, Ref: C7NN6584B) $6.10

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Item #: 178199, Ref: EAF6570A) $5.00

Valve Cover Vent Breather Gasket - This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Item #: 172956, Ref: EAF6863C) $1.50

Valve rocker arm cover gasket. - Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Item #: 128766, Ref: EAF6584C) $12.60

Engine Rebuild Kits

No
Picture
Basic Engine Overhaul Kit- Overbore - 801, 901, 4000 with 172 CID 4 cylinder gas engine. Super power 4" overbore Kit.Kit includes sleeve and piston set, full gasket set, Rod and Main Bearings, and pin bushings. Specify Rod and Main bearing size: Standard, .010, .020 or .030 (Item #: 130780, Ref: BEKF109) $406.00

Basic In Frame Overhaul Kit, 172 Diesel - Basic in-frame kit for 172 CID 4 Cylinder diesel engine 3.9 inch standard bore. Kit includes Sleeves, pistons, rings, pins, retainers, valve grind gasket kit, oil pan gasket. For tractor models (4000 1963-1964), 801, 901. (Item #: 184797, Ref: BIFF20) $675.00

Basic In Frame Overhaul Kit, 172 Gas, Overbore with Non Metal Head Gasket - For tractor models 800, 801, 900, 901, (4000 1963-1964). All with 172 inch CID 4 cylinder gas engine standard bore of 3.9 inch. Kit contains Super power set overbore to 4.0 inch. Contains: PK109 sleeve and piston kit with rings, pins and retainers, VGFPN1 valve grinding gasket kit, EAF6710B crankcase oil pan gasket. (Item #: 189561, Ref: BIFF109) $312.00

Basic In Frame Overhaul Kit, 172 Gas, with Metal Head Gasket - 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains head gasket with upper gasket set, sleeves, pistons, rings, pins and retainers, oil pan gasket. Bearings are available, must order separately. For tractor models 4000 (1963 to 1964), 800, 801, 900, 901. (Item #: 189416, Ref: BIFF115AM) $452.05

Basic In Frame Overhaul Kit, 172 Gas, with Non Metal Head Gasket - 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, NON-METAL head gasket with upper gasket kit, oil pan gasket. Bearings are available, must be ordered separately. For tractor models 4000 (1963-1964), 800, 801, 900, 901. (Item #: 184710, Ref: BIFF115A) $455.10

Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969), .020 Pistons - Basic In-Frame Kit with .020 inch Oversize Pistons for 201 CID 3-Cylinder Diesel 4.4 inch Standard Bore. Kit includes .020 inch pistons, rings, valve grind gasket kit, oil pan gasket. For model 4000 (1965-5/1969). (Item #: 189571, Ref: BIFF2012D) $199.00

Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969), .030 Pistons - 20 CID 3 cylinder diesel 4.4 inch standard bore. Basic in-frame kit with .030 inch oversize pistons. Comes with pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (1965-5/1969). (Item #: BIFF2013D) $392.33

Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969), .040 Pistons - Basic in-frame kit with .040 inch oversize pistons. For 201 CID 3-cylinder Diesel. Kit includes pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (1965-5/1969). (Item #: 189572, Ref: BIFF2014D) $372.00

Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969), Std Pistons - Basic in-frame kit with Standard (E0NN6108AA) pistons. for 201 CID 3-cylinder Diesel 4.4 inch standard bore. Kit includes pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (1965-5/1969). (Item #: 184537, Ref: BIFF2010D) $515.00

Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981), .020 Pistons - Basic In-Frame Kit with for 201 CID 3-Cylinder Diesel 4.4 inch standard bore. Kit includes, .020 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 189573, Ref: BIFF2022D) $241.00

Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981), .030 Pistons - Basic In-Frame Kit with .030 inch Oversize Pistons. for 201 CID 3-Cylinder Diesel. Kit includes, pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 189574, Ref: BIFF2023D) $240.00

Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981), .040 Pistons - Basic In-Frame Kit. For 201 CID 3-Cylinder Diesel 4.4 inch standard bore. Kit includes, .040 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: BIFF2024D) $448.03

Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981), STD Pistons - Basic In-Frame Kit with Standard Pistons (E0NN6108AA). For 201 CID 3-Cylinder Diesel 4.4 inch standard bore. Kit includes, pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 184579, Ref: BIFF2020D) $346.00

Basic In Frame Overhaul Kit, 201 Gas - For 4000 series and 4600 series, both with 201 CID Gas 3 Cylinder 4.4 inch standard bore 4.4 stroke engines 4/1968-1981. Contains Standard Pistons with pins and rings, upper gasket set, carburetor base gasket, head gasket and oil pan gasket. (Item #: 189570, Ref: BIFF2010G) $205.00

Basic Overhaul Kit - 172 CID 4 cylinder gas 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket set. less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 183988, Ref: BEKF115A-LCB) $429.00

Basic Overhaul Kit, 172 Diesel - 172 CID 4 cylinder diesel 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pin and retainers, pin bushings, complete gasket kit. Pin bushing do not come with oil holes and must be drilled. Bearings are available, must be ordered separately. For 4000 (1963-1964), 801, 901. (Item #: 130782, Ref: BEKF20-LCB) $710.00

Basic Overhaul Kit, 172 Gas, Overbore - 172 CID 4 cylinder gas 4.0 inch overbore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, Less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 130780, Ref: BEKF109-LCB) $406.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (1965-5\1969), .020 Pistons$
Basic Overhaul Kit, 201 Diesel, (1965-5/1969), .020 Pistons - Basic Engine Kit, for 201 CID 3 cylinder diesel, standard bore 4.4 inch, contains .020 inch pistons, rings, pin bushings, complete gasket kit. For model: 4000 (1965-5/1969). (Item #: 131002, Ref: BEKF2012D-LCB) $299.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (1965-5\1969), .030 Pistons$
Basic Overhaul Kit, 201 Diesel, (1965-5/1969), .030 Pistons - Basic Engine Kit, 201 CID diesel 3 cylinder, standard bore 4.4 inch, contains .030 inch pistons, rings, pin bushings, complete gasket set. For model 4000 (1965-5/1969). (Item #: 131003, Ref: BEKF2013D-LCB) $290.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (1965-5\1969), .040 Pistons$
Basic Overhaul Kit, 201 Diesel, (1965-5/1969), .040 Pistons - Basic Engine Kit, 201 CID 3 cylinder diesel 4.4 inch standard bore, contains .040 inch pistons, rings, pin bushings, complete gasket kit. For model 4000 (1965-5/1969). (Item #: 131004, Ref: BEKF2014D-LCB) $299.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (1965-5\1969), STD Pistons$
Basic Overhaul Kit, 201 Diesel, (1965-5/1969), STD Pistons - Fits 201 CID 3 cylinder diesel standard bore 4.4 inch. Kit contains std. pistons, rings, pin bushings, complete gasket kit. For model 4000 (1965-5/1969). (Item #: 130764, Ref: BEKF2010D-LCB) $299.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (6\1969-1981), .020 Pistons$
Basic Overhaul Kit, 201 Diesel, (6/1969-1981), .020 Pistons - Basic Engine Kit, 201 CID 3 Cylinder Diesel 4.4 inch standard bore. Contains .020 inch pistons, rings, pin bushings, complete gasket kit. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 131005, Ref: BEKF2022D-LCB) $231.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (6\1969-1981), .030 Pistons$
Basic Overhaul Kit, 201 Diesel, (6/1969-1981), .030 Pistons - Basic Engine Kit, 201 CID 3 Cylinder Diesel 4.4 inch standard bore. Contains .030 inch pistons, rings, pin bushings, complete gasket kit.For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 131006, Ref: BEKF2023D-LCB) $292.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (6\1969-1981), .040 Pistons$
Basic Overhaul Kit, 201 Diesel, (6/1969-1981), .040 Pistons - Basic Engine Kit, 201 CID 3 Cylinder Diesel 4.4 inch standard bore. Contains .040 inch pistons, rings, pin bushings, complete gasket kit. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 131007, Ref: BEKF2024D-LCB) $301.00

$Ford 4000 Basic Overhaul Kit, 201 Diesel, (6\1969-1981), STD Pistons$
Basic Overhaul Kit, 201 Diesel, (6/1969-1981), STD Pistons - Basic Engine Kit 201 CID 3 Cylinder Diesel 4.4 inch standard bore. Contains standard pistons, rings, pin bushings, complete gasket kit. For 4000 (6/1969-1975), 4600 (1975-1981). (Item #: 130760, Ref: BEKF2020D-LCB) $273.00

Basic Overhaul Kit, 201 Gas - Basic Engine Overhaul Kit, 201 CID 3-Cylinder Gas 4.4 inch standard bore with 4.4 inch stroke, standard pistons (C7NN6108T). Kit includes pistons, rings, pins, retainers, overhaul gasket set. For 4000 (4-1968 to 1975), 4600 (1975 to 1981). (Item #: 130765, Ref: BEKF2010G-LCB) $252.00

Engine Overhaul Kit with Crankshaft - Used on 201 CID Three Cylinder Diesel Engine. 4.4 inch standard bore. This kit includes: Pistons, Pins, Rings, Retainers, overhaul gaskets set with crankshaft seals, new crankshaft, rod bearings and main bearings. This is a non-sleeved engine. If you need to sleeve your engine back to standard, sleeves are available as part number D7NN6055A. The crankshaft in this kit is a 4.40 inch stroke. The piston height in this kit is 5.00 inches. (Item #: 183941, Ref: EKMC29) $1439.01

Engine Overhaul Kit with New Crankshaft - Comprehensive Kit For tractor models (1955 to 1964) 800, 900, 801, 901, 4000 up to 1964 with the 172 cu. inch Gas Engine 3.9" bore. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top and Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front and Rear Seals. Kit INCLUDES NEW CRANKSHAFT. (Item #: 183678, Ref: EKMC125) $1629.01

Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, BSG332, 192 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 (all 1/65-3/68), Compatible with Ford Engine (s) BSG332, 192, Standard Bore: 4.4007", Stroke: 4.200", Models 1/65-3/68, 2.738" piston compression height, Kit includes: .020" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 131026) $303.00

Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, BSG333, 201 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 4/68-12/74), 4600 (1/75-12/81), 4610 (1/81-4/82), 4610SU (8/81-4/82), Compatible with Ford Construction and industrial models 515 (10/75-9/78), 530A (1/81-4/82), 531 (1/75-12/81), 535 (10/75-9/78), 545 (3/78-12/82), 550 (1/75-9/78), 555 (10/78-12/82), Compatible with Ford Engine (s) BSG333, 201, Standard Bore: 4.4007", Stroke: 4.400", Models 4/68-12/82, 2.520" piston compression height, Kit includes: .020" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 131029) $260.00

Engine Rebuild Kit - Less Bearings - .030" Oversize Pistons, BSG333, 201 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 4/68-12/74), 4600 (1/75-12/81), 4610 (1/81-4/82), 4610SU (8/81-4/82), Compatible with Ford Construction and industrial models 515 (10/75-9/78), 530A (1/81-4/82), 531 (1/75-12/81), 535 (10/75-9/78), 545 (3/78-12/82), 550 (1/75-9/78), 555 (10/78-12/82), Compatible with Ford Engine (s) BSG333, 201, Standard Bore: 4.4007", Stroke: 4.400", Models 4/68-12/82, 2.520" piston compression height, Kit includes: .030" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 131030) $260.00

Engine Rebuild Kit - Less Bearings - .040" Oversize Pistons, BSG332, 192 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 (all 1/65-3/68), Compatible with Ford Engine (s) BSG332, 192, Standard Bore: 4.4007", Stroke: 4.200", Models 1/65-3/68, 2.738" piston compression height, Kit includes: .040" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 131028) $303.00

Engine Rebuild Kit - Less Bearings - .040" Oversize Pistons, BSG333, 201 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 4/68-12/74), 4600 (1/75-12/81), 4610 (1/81-4/82), 4610SU (8/81-4/82), Compatible with Ford Construction and industrial models 515 (10/75-9/78), 530A (1/81-4/82), 531 (1/75-12/81), 535 (10/75-9/78), 545 (3/78-12/82), 550 (1/75-9/78), 555 (10/78-12/82), Compatible with Ford Engine (s) BSG333, 201, Standard Bore: 4.4007", Stroke: 4.400", Models 4/68-12/82, 2.520" piston compression height, Kit includes: .040" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 131031) $277.00

Engine Rebuild Kit - Less Bearings - 1962-1972, 172 - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130783) $487.00

No
Picture
Engine Rebuild Kit - Less Bearings and Sleeves - 1962-later, 172 - For Ford tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000 (all 1962-later), Compatible with Ford Engine (s) 172 (gas), Bore: 3.901", Stroke: 3.600", .912" piston pin diameter, Models 1962-later, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130781) $382.00

Engine Rebuild Kit - Less Bearings - Standard Pistons, BSG332, 192 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 (all 1/65-3/68), Compatible with Ford Engine (s) BSG332, 192, Bore: 4.4007", Stroke: 4.200", Models 1/65-3/68, 2.738" piston compression height, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For cylinder repair sleeve use Item #: 106317, (Item #: 130763) $303.00

$Ford 4000 Engine Rebuild Kit with Valve Train - Less Bearings - 1\65-5\69, BSD333, 201$
Engine Rebuild Kit with Valve Train - Less Bearings - 1/65-5/69, BSD333, 201 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 1/65-5/69), Compatible with Ford Engine (s) BSD333, 201, Bore: 4.4007", Stroke: 4.400", Models 1/65-5/69, 2.682" piston compression height, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, (Item #: 130828) $362.00

Engine Rebuild Kit with Valve Train - Less Bearings - 1962-1972, 172 - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130810) $650.00

Engine Rebuild Kit with Valve Train - Less Bearings - 1962-later, 172 - For Ford tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000 (all 1962-later), Compatible with Ford Engine (s) 172 (gas), Bore: 3.901", Stroke: 3.600", .912" piston pin diameter, Models 1962-later, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130812) $478.00

$Ford 4000 Engine Rebuild Kit with Valve Train - Less Bearings - 6\69-2\90, BSD333, 201$
Engine Rebuild Kit with Valve Train - Less Bearings - 6/69-2/90, BSD333, 201 - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 6/69-12/74), 4600 (1/75-12/81), 4610 (1/81-2/90), 4610SU (8/81), Compatible with Ford Construction and industrial models 530A (1/81-4/83), 531 (1/75-7/81), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (6/85-11/88), 550 (1/75-9/78), 555 (10/78-12/83), 555A (1/84-5/85), 555B (6/85-10/88), Compatible with Ford Engine (s) BSD333, 201, Bore: 4.4007", Stroke: 4.400", Models 6/69-2/90, 2.682" piston compression height, Replaces headland pistons in sets, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106317, (Item #: 130825) $346.00

Overhaul Kit, 172 Diesel - Complete Overhaul Kit For 800, 900, 4000 With 172 inch Diesel Engine with 5-ring pistons. Contains sleeve and piston kit, complete gasket set, connecting rod bushings and bearings, center, front and rear main bearings, intake and exhaust valves (plus guides, locks and springs). Available with Std., .001 inch, .002 inch, .010 inch, .020 inch or .030 inch bearings. (Item #: 184770, Ref: 172DK) $1194.04

Overhaul Kit, 172 Diesel - 172 CID 4 cylinder diesel 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, intake and exhaust valves, springs, guides, valve keys. Bearings are available, must be ordered separately. For tractor models 801, 901, 4000 (1963-1964). (Item #: 130809, Ref: 172DK-LCB) $816.00

Overhaul Kit, 172 Gas - Overhaul kit for 800, 801, 900, 901, 4000 (1955-1964). With 4-cylinder 172 gas engine with 3-ring pistons. Contains sleeve and piston kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set). Basic gasket set. Intake and exhaust valves (plus guides, locks and springs). Bearings sold separately. (Item #: 130811, Ref: EOK115-LCB) $573.00

No
Picture
Overhaul Kit, 192 Gas - 192 CID 3 cylinder gas 4.4 inch standard bore, 4.2 inch stroke. Engine overhaul kit. Contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake and exhaust valves, springs, valve keys. For 4000 (1965-3/1968). (Item #: 130827, Ref: EOKF1920G-LCB) $379.00

Overhaul Kit, 201 Gas - 201 CID 3 cylinder gas 4.4 inch standard bore. Engine overhaul kit. Contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake and exhaust valves, springs, valve keys. For 4000 (4/1968-1975). (Item #: 130829, Ref: EOKF2010G-LCB) $341.00

No
Picture
Piston, 0.020" - For Ford tractor models 2000 (3 cyl, 1/65-12/74), 2100 (3 cyl, 3/65-12/74), 2110 (3 cyl, 1/65-12/74), 2120 (3 cyl, 1/65-12/74), 2300 (3 cyl, 1/65-12/74), 3000 (with 175 CID Diesel engine, 65-75), 3055 (3 cyl, 1/65-12/74), 3600 (with 175 CID Diesel engine, 75-81), 4000 (3 cyl, 1/65-12/74), 4100 (3 cyl), 4110 (3 cyl, 1/65-12/74), 4190 (3 cyl, 1/65-12/74), 4200 (3 cyl, 1/65-12/74), 4330 (3 cyl, 1/65-12/74), 4340 (3 cyl, 1/65-12/74), 4410 (3 cyl, 1/69-12/74), 5000 (with 233 CID Diesel engine, 65-3/68), Compatible with Ford Construction and industrial models 3500 (3 cyl, 1/65-12/74), 3550 (3 cyl, 1/65-12/74), 4500 (3 cyl, 1/65-12/74), Replaces Ford OEM number D4NN6108N, D6NN6108N, C5NN6108Z, C5NN6110AA, C7NN6110BA, D4NN6110Y, D5NN6110AX, D6NN6110AA, VPB2532, 81814521, 81845872, 83910852, Size: 0.020", Kit Includes: Piston, pin and snap rings, NOT Included: Ring set, For Complete Piston, Pin, Rings use Item #: 166362, (Item #: 173480) $160.00

Piston - .020" Oversize - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Engine (s) 172 (gas), .020" Oversize, Standard Bore: 3.901", Piston only, (Item #: 108668) $71.00

Piston and Rings - .020" Oversize - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4630, 6600, 6610, 6700, 6710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, Compatible with Ford Construction and industrial models 250C, 260C, 345D, 445D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 550, 555, 555A, 555B, Replaces Ford OEM number E0NN6108A-20, (Item #: 166362) $72.98

Piston and Rings - .040" Oversize - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4630, 6600, 6610, 6700, 6710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, Compatible with Ford Construction and industrial models 250C, 260C, 345D, 445D, 515, 530A, 540, 540A, 540B, 545, 550, 555, 555A, Replaces Ford OEM number E0NN6108A-40, (Item #: 166369) $74.00

Piston and Rings - Standard - For Ford tractor models TW5, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4630, 6600, 6610, 6700, 6710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, Compatible with Ford Construction and industrial models 250C, 260C, 345D, 445D, 515, 530A, 531, 532, 535, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, Compatible with Ford Engine (s) BSD333, BSD444, BSD666, 201, 268, 401, Replaces Ford OEM number D4NN6108T, 81817956, 81827165, 81845875, 81877563, 83928178, C7NN6108AH, D2NN6108AC, Replaces Casting number C5NN6110BH, C7NN6110BZ, D2NN6110AH, D2NN6110BN, D4NN6110AB, D4NN6110D, D6NN611CB, D9NN6110AAA, D9NN6110CA, D9NN6110XA, E0NN6110UA, Standard Bore: 4.401", (Item #: 113909) $89.00

Piston and Rings - Standard - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500 (all 4/68-12/74), 4600 (1/75-12/81), 4610 (1/81-4/82), 4610SU (8/81-4/82), Compatible with Ford Construction and industrial models 515 (10/75-9/78), 530A (1/81-4/82), 531 (1/75-12/81), 535 (10/75-9/78), 545 (3/78-12/82), 550 (1/75-9/78), 555 (10/78-12/82), Compatible with Ford Engine (s) BSG333, 201, Bore: 4.401, Includes: Piston, Pin, Rings and Retainers, (Item #: 164005) $130.00

Rebore Kit - 0.030" - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4630, 6600, 6610, 6700, 6710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, Compatible with Ford Construction and industrial models 250C, 260C, 345D, 445D, 515, 530A, 540, 540A, 540B, 545, 550, 555, 555A, Replaces OEM number E0NN6108A-30, (Item #: 166368) $65.00

No
Picture
Rebore Kit, 172 Gas - 3.90 inch .020 oversize. For tractor models 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3337) $212.31

No
Picture
Rebore Kit, 172 Gas, STD - 3.900 inch bore. For 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3336) $253.71

No
Picture
Rebore Kit, 192 Gas, .040 - .040 Inch oversize. For 4000 with 192 gas engine. (Item #: R3342) $434.13

No
Picture
Rebore Kit, 192 Gas, STD - 4.400 Inch bore. For 4000 with 192 gas engine. (Item #: R3341) $434.13

No
Picture
Rebore Kit, 201 Diesel - Re-Bore Sleeve and Piston Kit. For 4000 (1965 and up), 4600 (1975 and up), using 3 Cylinder 201 CID 4.4 inch bore Non-Turbo Diesel and Turbo Diesel Engines. Contains pistons, sleeves, rings, pins and pin retainers. (Item #: RBK678) $553.66

No
Picture
Rebore Kit, 201 Diesel, .020 - Oversize .020 inch. For tractor models 4000, 4600 with 201 diesel engine with 2.682 inch compression distance. (Item #: R3348) $291.06

No
Picture
Rebore Kit, 201 Diesel, .030 - Oversize .030 inch. For tractor models 4000, 4600 with 201 diesel engine with 2.682 inch compression distance. (Item #: R3349) $291.06

No
Picture
Rebore Kit, 201 Diesel, .040 - Oversize .040 inch. For tractor models 4000, 4600 with 201 diesel engine with 2.682 inch compression distance. (Item #: R3350) $333.13

No
Picture
Rebore Kit, 201 Diesel, STD - 4.400 Inch bore. For tractor models 4000, 4600 with 201 diesel engine with 2.682 inch compression distance. (Item #: R3347) $291.06

No
Picture
Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, .003 O/S Valve Stem - 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with 3 intake valves, 3 exhaust valves, 6 valve springs, 12 valve keepers. For tractor models 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Item #: 176569, Ref: VTK158-3) $69.00

No
Picture
Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, .015 O/S Valve Stem - 158 CID, 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with 3 intake valves, 3 exhaust valves, 6 valve springs, 12 valve keepers. For tractor models 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Item #: 172463, Ref: VTK158-15) $116.00

No
Picture
Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, Std. Valve Stem - 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with 3 intake valves, 3 exhaust valves, 6 valve springs, 12 valve keepers. For tractor models 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Item #: 108159, Ref: VTK158) $74.00

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Item #: 178669, Ref: VSKF134G) $115.00

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. For 501, 601, 701, 801, 901, 2000, 4000 (1958 TO 1964). Contains: springs, guides, locks, (no valves). (Item #: 189291, Ref: VSKF172D) $125.00

Valve Train Kit, 134 CID Gas - For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Item #: 108790, Ref: VOKF134G) $114.00

Valve Train Kit, 172 CID Diesel - This Valve Train Kit is for the 172 cubic inch diesel engine. The kit includes 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve keys, 8 valve locks, 8 valve springs. For tractor models 4000, 801, 901 all 1964 and before. (Item #: 120295, Ref: VTK172) $145.00

Valve Train Kit, 172 CID Gas - For 172 CID 4 cylinder gas engines. Kit comes with 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve springs, 8 valve keys, 8 valve locks. Models: 2000 <1964, 4000 1962-1964, (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840 all 1955-1957), (801, 811, 821, 841, 851, 861, 871, 881 all 1958-1962), (900, 950, 960 all 1955-1957), (901, 941, 951, 961, 971, 981 all 1958-1962). (Item #: 108790, Ref: VOKF134G) $114.00

Engine Parts

No
Picture
2nd Speed Mainshaft Gear, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2120, 2130, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 7530, Compatible with Ford Construction and industrial models 2030, 3550, 4040, Replaces Ford OEM number B9NN7A381B, Replaces Ford Casting nos 8N7101B, 8N7114B, Teeth: 56, Splines: 17, 3 and 4 Cylinder Tractors with 4 Speed Transmission, For a new version of this item use Item #: 108536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435402) $72.01

Ball Type Governor with Umbrella - For the following Ford models made after 1965: 2000 (3 cylinder), 2600, 3000, 3600, 4000 (3 cylinder), 4600, 5000, 5600. Replaces 377509-S, 500901, 81806923, 81817221, 83417081, C5NE12471A, and C5NE12B462A. (Item #: 183844, Ref: C7NN12471A) $179.00

No
Picture
Bare Block, Remanufactured, EAF6015F - For Ford tractor models 800, 900, 4000, Replaces Ford Casting number EAF6015F, EAF6015H, EAF6015J, Casting number (s): EAF6015F, EAF6015H, EAF6015J, Engine: 172, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204927) $1050.01

Camshaft - For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610, 4100, 3055, 3100, 335, 340, 3400, 3500, 3550, 3900, 3910, 4110, 4140, 420, 4200, 4400, 4410, 4500, 515, 532, 535, 545, 550, 555, ALL 3 CYLINDER DIESELS. 3610, 3910, BOTH GAS ENGINES. Camshaft also replaces C7NN6250E, 87800323. (Item #: 150910, Ref: E8NN6250AA) $112.00

Camshaft - Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Item #: 160917, Ref: C0NN6251A) $241.00

Camshaft and Lifter Kit - For Ford tractor models 2000 (1965-1975), 2100, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3300, 3310, 3330, 3430, 3600, 3610, 3910, 3930, 4000 (1965-1975), 4110, 4120, 4130, 4140, 4330, 4340, 4600, 4610, 4630, Compatible with Ford Construction and industrial models 335, 340, 345, 420, 445, 455, 515, 535, 540, 545, 545D, 550, 555, Compatible with Ford Engine (s) 158, 175, 192, Replaces Ford OEM number CK-FOR158201, (Item #: 128694) $244.00

Camshaft Gear - This camshaft gear is for Models 2310, 2810 and 2910 all with 158 CID Diesel (BDS326), model 2610 with 175 CID Diesel (BSD329), models 3610 and 3910 both with 192 CID Diesel (BSD329), models 4000, 4110, 4600 and 4610 all with 201 CID Diesel (BSD333), models 5600 and 5700 with 233 CID Diesel (BSD439), models 4830, 5030, 5110, 5610, 5900, 6600 and 6700 all with 256 CID Diesel (BSD442), and model 7600 with 256 CID Turbo Diesel (BSD442T). Replaces E3NN6N251AB, 83963173 (Item #: 191987, Ref: E3NN6N251AB) $316.00

No
Picture
Camshaft Gear, Used - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number EAF6256M, Crankshaft Teeth: 21, Camshaft Teeth: 42, Camshaft I.D. 1.0", For a new version of this item use Item #: 121561, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435994) $34.01

Camshaft Hydraulic Pump Drive Gear - For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Item #: 123501, Ref: EAF907B) $69.00

Camshaft Kit, Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Item #: 184418, Ref: 734145) $392.00

Camshaft Plug - Used on Ford engines: 158, 175, 192, 201, 233, 256, 268, 401 this camshaft plug replaces part numbers C5NND851B, 83994133, C5NND851A, 1816594 (Item #: 166919, Ref: C5NND851B) $42.90

Camshaft Timing Gear, STD - Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Item #: 121561, Ref: EAF6256M) $57.00

Camshaft, Used - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2111, 2120, 2130, 2131, 4000, 4000SU, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Compatible with Ford Engine(s) 134 (gas), 172 (gas), Replaces Ford OEM number C0NN6251A, EAF6250F, 313077, Late style camshaft using snap ring groove, Long nose, 1" wide gear, For a new version of this item use Item #: 160917, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436251) $122.01

Camshaft, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4630, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D (engine s/n A442029-earlier), 420, 445, 445A, 445C, 445D, 445D (engine s/n A442029-earlier), 455, 455C, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 3550, Compatible with Ford Engine(s) BSD326, BSD329, BSD332, BSD333, BSG326, BSG329, BSG332, BSG333, 158, 175, 192, 201 (all 3 cylinder, gas and diesel), Compatible with New Holland Skid Steer Loader(s) L783, L785, L865 (11/94-later), LX865 (11/94-later), LX885 (11/94-later), Replaces New Holland OEM number 87800323, For a new version of this item use Item #: 150910, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437500) $75.00

Connecting Rod - This new Connecting Rod used a 1.50 inch piston pin. It is used on Ford diesel engines: 192, 201, 233, 256, 268, 401 and Ford gas engines: 192, 201, 233, 256. It replaces OEM part numbers C7NN6205. Casting numbers: C7NN6205A, E5NN6205AA, E1TN6205AD. VERIFY CASTING NUMBERS BEFORE ORDERING. (Item #: 128642, Ref: C7NN6205) $99.00

Connecting Rod Assembly (36mm Journal) - New. Replaces C7NN6200A, E3HN6200AC, E4NN6200AB, E9NN6200AB, E9NN6200CA, F9NN6200AB, 81864279, 81875622, E3HN6200AC42, F2NN6200BA (*NOTE: Replace the complete set when replacing C5NE6200A Gas 1965-3/1968).C7NN6200A (Item #: 128642, Ref: C7NN6205) $99.00

Connecting Rod Bolt - These Connecting Rod Bolts are for gas and diesel Models: 1965 and later: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 7/16 diameter. Priced each. Uses 385279S2 nut, not included. (Item #: 114721, Ref: E4TN6214AA) $3.70

Connecting Rod Nut - Connecting Rod Nut, for gas or diesel tractors: 2000, 3000, 4000, 5000, 7000, 8000, 9000; 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700; 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710; TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA (Item #: 109429, Ref: 385279S2) $1.10

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref: 7HA-6212) $1.90

Connecting Rod Nut - For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B, For OEM Quality use Item #: 183734, (Item #: 182466) $1.10

Connecting Rod, Used - For Ford tractor models Super Major, TW5, TW10, 3230, 3430, 3610, 3910, 3930, 4000 (1965-1975), 4110, 4120, 4130, 4140, 4330, 4340, 4600, 4610, 4630, 4830, 5000 (1965-1975), 5030, 5100, 5600 (1975-1981), 5610, 5900, 6600 (1975-1981), 6610, 6700, 6710, 7810, 7910, 8000, 8210, 8530, 8600, 8700, Compatible with Ford Construction and industrial models A64, 345, 445, 455, 515, 535, 540, 545, 545D, 550, 555, 655, Replaces Ford OEM number C7NN6205A, C7NN6205, E5NN6205AA, E1TN6205AD, Solid non-drilled Beam, ID Pin Bushing: 1.500", For a new version of this item use Item #: 128642, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435947) $40.01

Crank Gear Key - For Ford tractor models 2000, 2600, 2610, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4400, 4500, 4600, 4610, 4630, 5000, 5550, 5600, 5610, 5900, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number C9NN6N250A, 5/16" x 3/8" x 2.86", (Item #: 168949) $26.20

Crankshaft, 3-Cylinder, 4.2 in. Stroke - For 3-cylinder 4.2 inch stroke engines. (Note: we also have crankshafts for 4.4 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 175 cubic inch engine 4.203 stroke 3 cylinder 183 CID and 192 CID engine. For tractor models (3000 Gas/Diesel), (4000 Gas 1965 to 3/1968), 2610 Diesel, 2910 Diesel, (3610, 3910 Gas/Diesel), (3230, 3430, 3930 up to 9/1990. Industrials: 230A Diesel, (250C, 260C Up to 9/1990), (234, 334, 335, 340A, 340B Gas/Diesel), 345C, (3400, 3500 Gas/Diesel), 445C, (4400, 4500 Gas 1965 to 3/1968. Replaces C5NE6303R. Additional $120.00 shipping due to weight. (Item #: 172719, Ref: F0NN6303NA) $684.30

Crankshaft, 3-Cylinder, 4.4 in. Stroke - For 3-Cylinder 4.4 inch stroke engines. (Note: we also have crankshafts for 4.2 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 3930, (4000 gas 4/1968 and newer), 4000 Diesel, 4100, 4600, 4110, 4130, 4610, 4630. Industrials: 250C, 260C, 345D, 420, 445, 445C, 445D, (4400, 4500 Gas 4/1968 and newer), (4400 and 4500 Diesel), 515, 530A, 531, 535, (540 and 545 Diesel). Replaces C5NE6303N, E5NN6303AA, F0NN6300MA, F0NN6303BA, FONN6300MA, 83956951. Additional $30 shipping due to weight. (Item #: 121094, Ref: F0NN6300MA) $527.00

No
Picture
Crankshaft - 4.2" Stroke - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 3900, 3910, 4000, Compatible with Ford Construction and industrial models 230A, 234, 333, 335, 340, 340A, 3550, Compatible with Ford Engine (s) BSD329, 175 (diesel), 192 (diesel), Replaces Ford OEM number E0NN6303AA, Replaces Casting number C5NE6303R, C5NE6305, EN438, C5NE6303L, Engine: 3 cylinder - 4.2 Stroke, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Snout: Keyed, 1 Bolt Hole, For a Remanufactured version of this sku use Item #: 200174, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100551) $488.00

Crankshaft, 4 cyl, Diesel - For 601, 701, 801, 901, 2000, 4000 (Except Majors) 58/64, all with Diesel 4 cylinder engines. Crankshaft, new, not reground. Replaces E2JL6300BA, D9NN6303B. (Item #: 100550, Ref: E2JL6300BA) $679.00

Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Item #: 185237, Ref: D1NL6303D) $700.00

Crankshaft Gear - This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Item #: 121563, Ref: EAF6306B) $60.00

Crankshaft Pulley - Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Item #: 169121, Ref: C0NN6351A) $92.92

Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A) $136.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

No
Picture
Crankshaft Pulley, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 3500, 3550, 4140, 4400, 4500, 5500, 5550, 6500, 7500 Replaces Ford OEM number D5NN6A312A, 83903583, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, Compatible with New Holland Skid Steer Loader(s) L783, L785, Compatible with New Holland Hay Cutting(s) 1118, 1499, Replaces New Holland OEM nos D5NN6A312A, For a new version of this item use Item #: 154921, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443383) $81.00

No
Picture
Crankshaft, Remanufactured, C0NN6303C, 310372 - For Ford tractor models NAA, 600, 700, 800, 900, 2000, 4000, Compatible with Ford Engine (s) 134 (gas), 172 (gas), Replaces Casting number C0NN6303C, 310372, D1NL6303A, EAF6303, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200170) $550.01

Crankshaft Repair Kit - Speedi Sleeve Crankshaft Repair Kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 106355, Ref: 99472) $168.00

Cylinder Head - For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For tractor models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Includes Guides and Seats. Does not include valves, or springs. Replaces D3JL6049B, 310098, 310100. Replaces Casting nos EAE6085E, 310098, 310100, D1NL6049D, D1NL6090D, EAE6090F, EAF6090F, EAF6090H (Item #: 121813, Ref: D3JL6049B) $900.00

No
Picture
Cylinder Head, Remanufactured, C5NE6090D - For Ford tractor models 2000, 2600, 2610, 3000, 3600, 4000, 4600, Replaces Ford Casting number C5NE6090D, C7NN6090AB, C7NN6090AE, C7NN6090M, H124450-39140, Engines 158, 175, 201, Casting No. C5NE6090D, C7NN6090AB, C7NN6090AE, C7NN6090M, H124450-39140, Cylinders 3, Ports: Square Intake - Square Exhaust- DSL - 1/2" Head Bolt, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200137) $870.01

No
Picture
Cylinder Head, Remanufactured, C5NE6090F - For Ford tractor models 4000, 4610 (diesel), Replaces Ford Casting number C5NE6090F, C5NE6090G, C7NN6090Y, C7NN6090Z, Engine (s): 201, Cylinders: 3, Ports: Exhaust - Square, Intake - Square, Casting Number (s): C5NE6090F, C5NE6090G, C7NN6090Y, C7NN6090Z, D5NN6090A, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200162) $870.01

Cylinder Head, Remanufactured, C7NN6090AA - For Ford tractor models 2000, 3000, 3510, 3600, 4000, 4600 (Gas), Compatible with Ford Construction and industrial models 4010, Compatible with Ford Engine (s) 158, 175, 201, Replaces Ford Casting number C7NN6090AA, C7NN6090R, D3NN6090H, D5NN6090H, C5NE6090F, C5NE6090G, C7NN6090Y, C7NN6090Z, Cylinders: 3, Ports: Square Intake - Square Exhaust - 1/2" Head Bolts, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200139) $870.01

No
Picture
Cylinder Head, Remanufactured, D1NL6049D - For Ford tractor models 800, 900, 4000 (Gas), Replaces Ford Casting number D1NL6049D, 310100, D1NL6090D, EAF6090H, Engines 172, Cylinders: 4, 1/2" head bolts, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, For a New version of this sku use Item #: 121813, (Item #: 205484) $800.01

No
Picture
Cylinder Head, Remanufactured, D3JL6090C - For Ford tractor model 4000, Replaces Ford Casting number D3JL6090C, Engine 192, diesel, Cylinders: 3, Casting No. D3JL6090C, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 203932) $900.01

No
Picture
Cylinder Head, Remanufactured, D3NN6090K - For Ford tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, Replaces Casting number D3NN6090K, D5NN6090K, E1NN6090AA, E1NN6090AB, Engine: 175, 192, 201, Cylinders 3, Pors: Round Intake - Square Exhaust - Diesel - 1/2" Head Bolts, Casting No. D3NN6090K, D5NN6090K, E1NN6090AA, E1NN6090AB, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200140) $870.01

No
Picture
Cylinder Head, Used - For Ford tractor model 4000, Replaces Ford Casting number D3JL6090C, Engine(s): 192 diesel, Cylinders: 3, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 203932, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403932) $234.01

No
Picture
Cylinder Head, Used - For Ford tractor models 2000, 2600, 2610, 3000, 3600, 4000, 4600, Replaces Ford Casting number C5NE6090D, C7NN6090AB, C7NN6090AE, C7NN6090M, C5NE6090A, Engines 158, 175, 201, Cylinders 3, Ports: Square Intake - Square Exhaust- DSL - 1/2" Head Bolt, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200137, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400137) $475.01

No
Picture
Cylinder Head, Used - For Ford tractor models 800, 900, 4000 (Gas EAF), Replaces Ford Casting number 310100, EAF6090F, EAF6090H, Engine(s): 172, Cylinders: 4, 7/16" head bolts, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 310263, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400131) $475.01

No
Picture
Cylinder Head, w/ Valves, Remanufactured, C5NE6090F - For Ford tractor models 4000, 4610 (diesel), Replaces Ford Casting number C5NE6090F, C5NE6090G, C7NN6090Y, C7NN6090Z, D5NN6090A, E6NN6090AB, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, Ports: Squ./Squ., Not a welded head, (Item #: 210378) $1175.01

No
Picture
Cylinder Head, w/ Valves, Remanufactured, D3NN6090K - For Ford tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, Replaces Casting number D3NN6090K, D5NN6090K, E1NN6090AA, E1NN6090AB, Ports: Intake - Round, Exhaust - Square, Not a welded head, Head bolts: 1/2" (Diesel), Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 210373) $1175.01

Engine Balancer - For 2000 3 cylinder gas, 3000 gas, 4000 3 cylinder gas, 5000 gas and diesel, 5600, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710. Replaces 87802137, D9NN6A311AD, 83924287. Used through 8/1986. 1/2 inch wide gears. (Item #: 168875, Ref: D9NN6A311AD) $383.00

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref: 350645S) $18.80

Flywheel With Ring Gear - This new flywheel includes E2NN6384AA - 128 tooth ring gear. It is used on tractors with 11 inch clutches. Replaces C7NN6375H, E0NN6375LA. (Item #: 159168, Ref: E0NN6375LA) $1009.01

Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S) $2.10

Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 8240, 8340, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, 650, 655C, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, 256 Replaces Ford OEM nos E5NN6C044A, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, 5610S, 6610S, 6640, 6810S, 7010, 7610S, 7740, 7840, 8010, 8340, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044A, 83956700, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434395) $30.01

Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2600, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8240, 8340, Compatible with Ford Construction and industrial models 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445D, 450, 455, 455C, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555B, 555C, 555D, 575D, 655C, 655D, 675D, 750, 755, 755A, 755B, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333 Replaces Ford OEM nos E5NN6C044AA, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044AA, 83956700, For CAV Injection Pump, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436881) $31.01

Governor Assembly - This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Item #: 115381, Ref: EAF12470A) $111.00

Governor Compensating Spring - Mounts between Bellcrank and under battery tray, 6.535 inch overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Item #: 178181, Ref: NCA9827A) $8.50

Governor Compensator Spring Assembly - 3 Pieces. Replaces NCA99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas. For 501 thru 4140 4 cylinder gas and LP 1958-1964 with engine serial number 26402 and up. (Item #: 116123, Ref: NCA99810A) $26.00

Governor Shaft Oil Seal - Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Item #: 178055, Ref: EAF18183B) $8.90

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Lifter - Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Item #: 160900, Ref: F3JL6500AA) $11.40

Main Shaft Gear, Used - For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140, Replaces Ford OEM nos 8N7110, 4th Gear, Teeth: 39, Splines: 17, Inside Diameter: 1.783", Outside Diameter: 5.119", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436813) $95.01

Pulley - Belt Idler - For Ford tractor models 2000 (with A/C), 3000 (with A/C), 4000 (with A/C), 5000 (with A/C), 5640 (with A/C), 6640 (with A/C), 7740 (with A/C), 7840 (with A/C), 8240 (with A/C), 8340 (with A/C) Replaces Ford OEM number F0NN8A618BB, F0NN8A618BA, , Compatible with New Holland tractor models TS90 (with A/C), TS100 (with A/C), TS110 (with A/C), TS115 (with A/C), 5640 (with A/C), 6640 (with A/C), 7740 (with A/C), 7840 (with A/C), 8240 (with A/C), 8340 (with A/C), Replaces New Holland OEM number 81871906, O.D.: 4.303", I.D.: .637", Smooth, (Item #: 161792) $36.80

Push Rod - For tractor models 2000, 3000, 4000, 5000, 7000. All for 3 or 4 cylinder Diesel from 8/1965 to 1975. Push Rod is 12.17 inches long. (Item #: 165225, Ref: C5NE6567B) $5.70

$Ford 4000 Push Rod, 5\16 Diameter$
Push Rod, 5/16 Diameter - If replacing 1/4 inch outside diameter push rod (early 134 engines), you must also use part number 131473 rocker adjusting screw, and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5/16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Item #: 182481, Ref: 500356) $11.20

Push Rod, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 5550, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos 81813399, , Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1118, 1499 Replaces New Holland OEM nos 81813399, , Compatible with Versatile Hay Cutting(s) 4750, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443449) $3.86

Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref: 9N6384) $26.00

Ring Gear, Flywheel - This New Starter Flywheel Ring Gear has a 14.634 inside diameter, a 16.245 outside diameter and 162 teeth. It is used on the following gas tractors built 1965 and later: 2000, 230, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 420, 4400, 445, 4500, 4600, 4610, 5000, 530, 531, 532, 535, 540, 545, 550, 5500, 555, 5550, It replaces original part number C5NE6384B. (Item #: 154730, Ref: C5NE6384B) $164.00

Rocker Arm - Rocker Arm for Exhaust Valve. For 3 -4 and 6 cylinder tractor models, 1965 and later. 2000 3 cylinder, 3000, 4000 3 cylinder, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. Replaces 81804316, C5NE6529A, D5NE6529A (Item #: 178902, Ref: C5NE6529A) $48.00

Rocker Arm - Rocker Arm, for Intake Valve. Replaces D9NN6529AA. For 3 cylinder tractor models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Item #: 186991, Ref: D9NN6529AB) $27.60

Rocker Arm Screw - Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473) $47.30

No
Picture
Rocker Arm Shaft Support - For Ford tractor models TW10, TW20, TW30, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 5500, 5550, 6500, 7500, 8400, Replaces Ford OEM number 83952459, C7NN6531A, (Item #: 176429) $18.80

Tappet - For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Item #: 160900, Ref: EAA6500D) $11.40

Tappet, Diesel Engines - Tappet, 2.06 inches long, .990 inch diameter. DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Item #: 112190, Ref: C5NE6500C2) $4.98

Timing Gear Cover, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T, 256, Replaces Ford OEM nos D9NN6059AA, D5NN6059N, D5NN6059J, D5NN6059F, D5NN6059A, D0NN6059C, Replaces Casting nos D0NN6059F, D5NN6059, D9NN6059, D9NN6059N, Fifteen: 5/16 Bolts and Two: 3/8 Bolts Around the outer edge, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435271) $125.01

Timing Gear Cover, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555E, 575E, 655, 655A, 655E, 675E, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T, 256, Replaces Ford OEM nos 87802503, E6NN6059AA, E6NN6059AC, 87800077, 87801797, Replaces Casting nos E6NN6059AB, Six: 5/16 Bolts and Eleven: 3/8 Bolts Around the outer edge, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437583) $150.01

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $63.00

Timing Gear Set - Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Item #: 149997, Ref: EAF6256MSTD) $159.00

Transmission Gear - 3rd, Used - For Ford tractor models NAA, 8N, 501, 541, 600, 620, 621, 630, 631, 640, 641, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Replaces Ford OEM number 8N7102, Teeth: 28 and 52, For a new version of this item use Item #: 172982, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459492) $134.01

No
Picture
Transmission Input Shaft Select O Speed, Premium Used - For Ford tractor models 501, 541, 601, 701, 801, 901, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4110, 4120, 4121, 4130, 4131 (all with single speed PTO), 4140 (all with single speed PTO), Compatible with Ford Construction and industrial models 541, 1801, 1811, 1821, 1841, 1871, 1881, 4040, 4140 (all with single speed PTO), Replaces Ford OEM nos CFPN7B496H, Splines: 22, Shaft has sealing rings on each side of middle gear and an angle cut gear in the middle, (Item #: 300517) $415.01

No
Picture
Transmission Input Shaft Select O Speed, Premium Used - For Ford tractor models 501, 541, 601, 701, 801, 901, 2000, 2031, 4000, 4031 (all with dual speed PTO), Compatible with Ford Construction and industrial models 541, 1801, 1811, 1821, 1841, 1871, 1881, 4040 (all with dual speed PTO), Replaces Ford OEM nos C0NN7017H, Splines: 22, Shaft has no sealing rings and an straight cut gear in the middle, (Item #: 300516) $415.01

No
Picture
Transmission Input Shaft Select O Speed, Premium Used - For Ford tractor models 501, 541, 601, 701, 801, 901, 2000, 2031, 4000, 4031 (all with single speed PTO), Compatible with Ford Construction and industrial models 541, 1801, 1811, 1821, 1841, 1871, 1881, 4040 (all with single speed PTO), Replaces Ford OEM nos C0NN7017G, Splines: 22, Shaft has no sealing rings and an angle cut gear in the middle, (Item #: 300515) $415.01

Transmission Input Shaft Select-O-Speed, Premium Used - For Ford tractor models 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000 (3 and 4 cylinder), 2031, 2100, 2110 (3 and 4 cylinder), 2111, 2120 (3 and 4 cylinder), 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000 (3 and 4 cylinder), 4031, 4100, 4110 (3 and 4 cylinder), 4120, 4130, 4131, 4140 (3 and 4 cylinder), 4190, 4200, 4330, 4340, 4400, 4410, 4500, 6000 (all with dual speed PTO), Compatible with Ford Construction and industrial models 541, 1801, 1811, 1821, 1841, 1871, 1881, 3500, 3550, 4040, 4140 (3 and 4 cylinder), 4500, Replaces Ford OEM nos CFPN7B496E, Splines: 20, Shaft has sealing rings on each side of middle gear and an straight cut gear in the middle, (Item #: 300518) $415.01

Valve, Exhaust - Exhaust valve for tractor models with 4 cylinder diesels: 501, 601, 701, 801, 901, 2000, 4000. (Item #: 184892, Ref: 310651) $15.80

Valve, Exhaust - Standard Exhaust Valve. For 201 CID Gas or Diesel and 192 Gas, tractor models 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Item #: 128664, Ref: C7NN6505E) $9.90

Valve, Exhaust - Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Exhaust - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Exhaust Oversize - This Oversize Exhaust Valve, .003 inch oversize stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Item #: 172972, Ref: C7NN6505F) $14.14

Valve, Exhaust Oversize - This Oversize Exhaust Valve is .015 inch oversize stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Item #: 172971, Ref: C7NN6505G) $24.90

Valve Guide - Valve Guide for tractor models with 4 cylinder gas and diesels: 501, 601, 701, 801, 901, 2000, 4000. Price is for EACH. Minimum order quantity is 4. (Item #: 173498, Ref: EAF6510C) $3.90

Valve, Intake - Intake Valve for tractor models with 4 cylinder diesels: 501, 601, 701, 2000, 4000, 801, 901. (Item #: 183916, Ref: 310650) $12.90

Valve, Intake - Standard Intake Valve for 201 CID Gas or Diesel and 192 CID Gas tractor models 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Item #: 128662, Ref: C5NN6507B) $9.00

Valve, Intake - Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172846, Ref: EBU6507A) $8.40

Valve, Intake Guide - For tractor models with 4 cylinder diesels: 2000, 4000, 501, 601, 701, 801, 901. Price is for EACH. Minimum order quantity is 4. (Item #: 172790, Ref: 311411) $6.30

Valve, Intake Oversize - Intake Valve, .003 inch oversize stem. For models with the 201 CID Gas and 291 CID Gas engines: 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Item #: 172847, Ref: C5NN6507C) $14.10

Valve, Intake Oversize - Intake Valves .015 inch oversize stem. For tractor models 2000, 3000, 4000, 4600, 4610, 5000, 8000, 8200, 8600, all with 201 CID Gas or Diesel and 192 Gas. (Item #: 172848, Ref: C5NN6507D) $18.40

$Ford 4000 Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Item #: 107088, Ref: 7HA6518) $0.60

Valve Lifter - For Ford tractor models 2000, 2100, 2300, 2310, 2600, 2610, 3000, 3055, 3100, 3120, 3190, 3330, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 5000, 5100, 5190, 5200, 5340, 5550, 6600, Compatible with Ford Construction and industrial models 230A, 231, 335, 340A, 420, 445, 515, 530A, 531, 535, 545, 550, 555, Replaces Ford OEM number C7NN6500A, (Item #: 166212) $14.60

Valve Lifter, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2610, 2810, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8160, 8200, 8210, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 550, 555, 555E, 575E, 655, 655E, 675E, Compatible with Ford Engine(s) BSD326, BSD329, BSD332, BSD333, BSD442, BSD442T, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number C7NN6500B, C5NE6500C2, 83946434, E4HN6500AA, 83957729, C5NE6500C, , Compatible with New Holland tractor models TB90, TB100, TB110, TB120, TS80, TS90, 7010, 8010, 8240, For a new version of this item use Item #: 112190, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435585) $4.76

No
Picture
Valve Service Kit - This Valve Service Kit is for tractor models 2000, 2600, 3000, 3600, 4000, 4600. Contains: springs and locks, (no valves). (Item #: 190651, Ref: VSKF158) $84.00

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A) $2.80

Valve Spring - Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Item #: 173016, Ref: EAA6513A) $2.50

Valve Stem Cap, Exhaust - This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Item #: 168344, Ref: 8EQ6550A) $4.80

Engine Pistons and Sleeves

Cylinder Kit - 4.000 - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000 (series), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (4 cylinder gas, 1955-1961, 3.901" standard bore), Compatible with New Holland Hay Cutting (s) 907, 909, 4.000" Overbore Cylinder Kit, Includes: Piston and Rings, Liner, Pin and Retainers, For 3.901" standard bore cylinder kit use Item #: 161138, (Item #: 161137) $81.00

No
Picture
Piston, .020 Overbore, 172 CID Gas Engine - Overbore .020 3-Ring Piston (rings NOT included) with Pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas engine (1953-1964) on: 800, 801, 900, 901, 4000. Price is for one piston. (Item #: 184929, Ref: EAF6108G) $31.30

No
Picture
Piston, .030 Overbore, 172 CID Gas Engine - Overbore .030 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185436, Ref: EAF6108H) $33.80

No
Picture
Piston, .040 Overbore, 172 CID Gas Engine - Overbore .040 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185551, Ref: EAF6108J) $31.30

Piston And Ring Kit, .030, 201 CID Diesel - For 4000 with 201 CID (4.4 inch bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3) .030 inch overbore pistons, pins, retainers and rings. (Item #: PRK201-030) $257.01

Piston And Ring Kit, .040, 201 CID Diesel - For 4000 with 201 CID (4.4 inch bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3) .040 inch overbore pistons, pins, retainers and rings. (Item #: PRK201-040) $326.22

Piston And Ring Kit, STD, 192 CID Gas - For tractor models 4000 (1965 to 3-1968). Piston kit is for a 192 CID gas 3-Cylinder with 4.4 inch standard bore. Kit contains: (3) pistons, piston pins, retainers, and complete ring set. (Item #: PRKF1920G) $445.05

Piston And Ring Kit, STD, Single Cylinder - For tractor models 4000, 4600 (With 201 CID Gas 3-Cylinder, 4.4 inch bore). Kit contains: piston, pins, retainers, and complete ring set.For a single cylinder. (Item #: PRKF2010G) $124.00

No
Picture
Piston and Sleeve Kit 172 Gas - Kit, Press-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.1 inch outside diameter. (Item #: 185075, Ref: FPN6055A) $615.00

No
Picture
Piston and Sleeve Kit 172 Gas - Kit, Drop-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.098 inch outside diameter. (Item #: 161138, Ref: FPN6055B) $217.00

Piston Pin Bushing - Fits 158 CID gas and diesel, 175 CID gas and diesel, 192 CID gas, 201 CID diesel, 233 CID diesel, 256 CID gas and diesel and 268 CID diesel. For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710. (Item #: 128600, Ref: C5NE6207A) $4.90

Piston Sleeve - (FORD) Sleeve- Cylinder - Finished - Sleeve only. 4.4 inch bore diesel engine. Replacement for re-bore kits listed. Finished bore and honed. (Item #: 160021, Ref: RBS514) $38.00

Piston Sleeve - Engines 401 CID Diesel and Turbo Diesel, 192 CID Gas, 201 Gas and Diesel, 256 CID Gas and Diesel, 256 Turbo Diesel, 233 Diesel, 268 Non Turbo and Turbo Diesel. Semi-Finished 4.4 inch bore used when boring Non Sleeved Engine. For tractor models 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 160021, Ref: SD753) $38.00

Piston Sleeve, 172 Gas - Used on 172 Gas engines with 4.0 inch bore (3.90 is standard). Used 1954-1964 when 4.0 overbore pistons have been installed. (Item #: 184425, Ref: EAF6055D4) $39.80

Piston Sleeve, 172 Gas or Diesel Engine - Standard Sleeve with 3.9 inch bore, (4.1 inch outside diameter, press fit) for 172 CID gas or diesel engines on: 800, 801, 900, 901, 4000. (Item #: 172912, Ref: EAF6055D) $42.90

Piston Sleeve, 4.2 Inch Bore - This is a semi-finished straight sleeve (no lip) for 4.2 inch bore engines. It is used when repairing non-sleeved engines, boring and honing required. Inside diameter 105.530mm (4.200 inches). Outside diameter 110.870mm (4.362 inches). Overall height 209.550mm (8.250 inches). Replaces 81815327, 87295246, C5NN6055A (Item #: 160001, Ref: C5NN6055A) $33.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished straight (non-flanged) sleeve for 4.4 inch bore engines. It is used when boring non sleeved engines. Length 8.21 inches, Inside Diameter 4.4 inches and Outside Diameter 4.6 inches. Replaces 81823241, 83912946, C9NN6055A, D0NN6055B, D7NN6055A (Item #: 108763, Ref: D7NN6055A) $50.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished flanged sleeve for 4.4 inch bore engines. Inside diameter of 4.4 inches, outside diameter 4.50 inches, Flange lip .100 inches, diameter at flange 4.738 inches and overall length is 8.21 inches. This sleeve is for boring non-sleeved engines. Block must be counterbored for sleeve flange. Replaces 83912946, 81823241, 81829308, C9NN6055A, D7NN6055A (Item #: 160021, Ref: D7NN6055AFL) $38.00

No
Picture
Piston Sleeve, Semi Finished, 4.2 Inch Bore - It is used when repairing non-sleeved engines, boring and honing required. Liner inside diameter 4.2 inch, outside diameter 4.35 inch. For tractor models 175 CID Diesel on; (2000 1965-1975), (2600 1975-1981), (3000 1965-1975), (4000 1965-3/1968). 192 GAS engine on; (3610 1981-4/1982), (3910 1981-4/1982), 233 Diesel engine on; (5000 1965-3/1968). (Item #: 160001, Ref: SD756) $33.00

No
Picture
Piston, Standard, 172 CID Gas Engine - Standard 3-Ring Piston, 3.9 inch bore, (Rings NOT included) with Pin and Locks. For 172 CID 4-Cylinder Gas Engine on: 800, 801, 900, 901, 4000 (1953 to 1964). (Item #: 184427, Ref: EAF6108F) $51.00

No
Picture
Piston, STD, 172 CID Diesel - Standard (PK20) 5-Ring Piston (rings NOT included) with Pin and Locks for 4-Cylinder 172 Diesel Engine on: 4000, 801, 901 (1958 to 1964). (Item #: 184506, Ref: 313879) $79.00

Piston, STD, 192 CID Gas - For tractor models 4000 (1965 to 3-1968). Piston is for a 192 CID gas 3-Cylinder with 4.4 inch standard bore. This piston is for one cylinder. Comes with Rings. Replaces C7NN6108N, C5NN6108AT, C5NN6108AU (Item #: 184879, Ref: DOTZ6108F) $86.00

No
Picture
Piston, STD, 201 CID Gas - Standard Piston with Pin. 4.4 inch bore. For tractor models 4000, 4600. (Item #: C7NN6108T) $130.69

No
Picture
Piston With Pin, .020, Diesels - Overbore .020 inch piston. For 201, 256, 268 and 401 CID (3, 4, 6 cylinder diesel engines), (4.4 inch bore 1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Item #: 173322, Ref: E0NN6108CA) $126.00

No
Picture
Piston With Pin, .030, Diesels - Overbore .030 inch piston for 201, 256, 268 and 401 CID (3, 4, 6 cylinder diesel engines), (4.4 inch bore 1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Item #: 173318, Ref: E0NN6108DA) $130.00

No
Picture
Piston With Pin, .040, Diesels - Overbore .040 inch piston for 201, 256, 268 and 401 CID (3, 4, 6 cylinder diesel engines), (4.4 inch bore 1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Item #: 173315, Ref: E0NN6108EA) $182.00

No
Picture
Piston With Pin, STD, Diesels - Standard Bore Piston (4.4 inch bore) for 201, 256, 268 and 401 CID (3, 4, 6 Cylinder Diesel Engines 1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Item #: E0NN6108AA) $59.99

No
Picture
Rod Bushing - For 172 CID DIESEL in: 4000, 801, 901. (Item #: 166239, Ref: 310633) $12.50

Sleeve and Piston Kit, 172 Gas, STD - Sleeve and Piston Kit for models 800, 801, 900, 901, 4000, Jubilee. All with 172 CID Gas, 4 Cylinder (1955-1964). Standard bore. For 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains: pistons, sleeves, piston pins, retainers and chrome top and chrome steel rail oil control rings. (Item #: 190153, Ref: PK15G1) $715.00

No
Picture
Sleeve, STD, 172 CID Gas - Standard sleeve. For tractor models 4000, 800, 801, 900, 901. All with 3.9 inch bore, 4.098 inch outside diameter drop-in. Prefinished. (Item #: 172912, Ref: B3NN6055B) $42.90

Engine Rings

No
Picture
Piston - .040" - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5600, 5700, 6600, 6700, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 531, 3500, 3550, 4500, 8400, Replaces Ford OEM number D4NN6108E, C7NN6110AV, C7NN6110G, C5NN6110T, C7NN6108BN, C5NN6108T, D5NN6110AM, D5NN6110BK, D4NN6110L, D2NN6108U, D2NN6110AE, 81846018, 83910841, 31P31, D6NN6108F, D6NN6110R, D6NN6110X, D6NN6108K, D4NN6108AE, Size: .040", (Item #: 172308) $176.00

Piston Rings, .020, 192-201 CID Gas - Oversize .020 inch. For Tractor Models 4000, 4600 (with 192 and 201 CID Gas 3-Cylinder), 5000, 6600 (with 256 CID Gas 4-Cylinder). All engines with a 4.4 inch Standard Bore. This Ring Set is for one Cylinder. (Item #: 150197, Ref: CFPN6149BH) $22.70

Piston Rings, .040, 192-201 CID Gas - Oversize .040 inch. For Tractor Models 4000, 4600 (with 192 and 201 CID Gas 3-Cylinder), 5000, 6600 (with 256 CID Gas 4-Cylinder). All engines with a 4.4 inch Standard Bore. This Ring Set is for one Cylinder. (Item #: CFPN6149BK) $17.80

No
Picture
Piston Ring Set, .020, 172 CID Diesel - Overbore .020 5-Ring Set. Complete set for 4-Cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Item #: C5NN6149AB) $98.20

No
Picture
Piston Ring Set, .020, 201 CID Diesel - .020 inch Oversize Ring Set for 1 Cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold per Cylinder. (Item #: CFPN6149BD) $22.37

No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as a complete 4 cylinder set, For single cylinder set use Item #: 150187, (Item #: 150186) $61.98

No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder Set - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - .020" Oversize - Single Cylinder use Item #: 120775, (Item #: 174347) $101.00

Piston Ring Set - .020" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555849, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120778, (Item #: 108669) $34.90

Piston Ring Set - .020" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120776, (Item #: 120775) $29.70

Piston Ring Set - .020" Oversize - Single Cylinder Set - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, Compatible with Ford Construction and industrial models 515, 530A, 531, 535, 545, 550, 555, Compatible with Ford Engine (s) BSG332, BSG333, 192, 201, Standard Bore: 4.4007”, Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, For standard use Item #: 179759, (Item #: 150197) $22.70

No
Picture
Piston Ring Set, .030, 172 CID Diesel - Overbore .030 5-Ring Set. Complete set for 4-Cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Item #: C5NN6149AC) $145.16

No
Picture
Piston Ring Set, .030, 201 CID Diesel - .030 inch Oversize Ring Set for 1 Cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold per Cylinder. (Item #: CFPN6149BE) $26.07

Piston Ring Set - .030" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555848, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .030" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 150189, (Item #: 120777) $47.50

Piston Ring Set - .030" Oversize - Single Cylinder Set - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, Compatible with Ford Construction and industrial models 515, 530A, 531, 535, 545, 550, 555, Compatible with Ford Engine (s) BSG332, BSG333, 192, 201, Standard Bore: 4.4007”, Ring Size: .030" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, For standard use Item #: 150199, (Item #: 150198) $23.30

No
Picture
Piston Ring Set, .040, 172 CID Diesel - Overbore .040 5-Ring Set. Complete set for 4-Cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Item #: C5NN6149AD) $133.14

No
Picture
Piston Ring Set, .040, 201 CID Diesel - .040 inch Oversize Ring Set for 1 cylinder. For 4000, 4600, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Item #: CFPN6149BF) $21.30

No
Picture
Piston Ring Set - .040" Oversize - 4 Cylinder Set - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, For .040" Oversize Single Cylinder Piston Ring Set use Item #: 120776, (Item #: 174341) $201.00

Piston Ring Set - .040" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120775, (Item #: 120776) $52.00

Piston Ring Set - .040" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number FPN6149J, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .040" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120777, (Item #: 120778) $34.90

Piston Ring Set - .040" Oversize - Single Cylinder Set - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, Compatible with Ford Construction and industrial models 515, 530A, 531, 535, 545, 550, 555, Compatible with Ford Engine (s) BSG332, BSG333, 192, 201, Standard Bore: 4.4007”, Ring Size: .040" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, For standard use Item #: 179763, (Item #: 150199) $23.30

Piston Ring Set - .060" Oversize - 4 Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .060" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, For standard use Item #: 150190, (Item #: 120779) $111.00

Piston Ring Set - 4.000" Overbore - 4 Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129003) $180.00

Piston Ring Set - 4.000" Overbore - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 3.901" standard bore) Replaces Ford OEM number AF6149A, , Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (1) @ .078" and (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .078", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.000" Overbore - 4 Cylinder use Item #: 174353, (Item #: 120781) $15.50

No
Picture
Piston Ring Set, Diesel, Standard - Standard 5-Ring Set. Complete set for 4-Cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Item #: 174338, Ref: C5NN6149AA) $104.00

No
Picture
Piston Ring Set, Gas - Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with 2 compression at 3/32 and 1 oil. (Item #: 174337, Ref: 2C7673) $109.00

No
Picture
Piston Ring Set, Gas, .020 Over - Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with .020 inch overbore with 2 compression at 3/32 inch and 1 oil at 3/16. (Item #: 174350, Ref: 2C7673.020) $113.00

No
Picture
Piston Ring Set, Gas, .030, Chrome - Overbore .030 (Standard bore is 3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch (top is Chrome), and steel rail oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 150189, Ref: EAF6149B) $96.44

No
Picture
Piston Ring Set, Gas, .040 Over - For a single cylinder. 4 Cylinder Gas 3.9 inch bore with .040 overbore with 2 compression at 3/32 and 1 oil ring at 3/16. (Item #: 120778, Ref: 2C7673.040) $34.90

No
Picture
Piston Ring Set, Gas, 4 Inch Overbore - For tractor models 800, 801, 900, 901, 4000. All 1953-1964 with 172 gas. 3.9 inch bore engines. This ring set is for 4 inch overbore, with 2 compression rings at 5/64 inch, 3/32 inch and oil at 3/16 inch. (Item #: 174353, Ref: PRS109) $76.00

Piston Ring Set - Standard - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539364, , Compatible with New Holland Hay Cutting (s) 907, 909, Bore: 3.901", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - Standard - 4 Cylinder use Item #: 120776, (Item #: 120774) $28.10

Piston Ring Set - Standard - Single Cylinder Set - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, Compatible with Ford Construction and industrial models 515, 530A, 531, 535, 545, 550, 555, Compatible with Ford Engine (s) BSG332, BSG333, 192, 201, Bore: 4.4007”, Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, For .020" use Item #: 150199, (Item #: 129009) $16.90

No
Picture
Piston Ring Set, STD, Diesel - Standard Ring Set for 1 Piston. 4.4 bore. Compression rings at 3/32 inch, and Oil ring at 3/16 inch. For Tractor Models 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. 3, 4 or 6 needed depending on Engine. Sold per Cylinder. (Item #: 120770, Ref: CFPN6149BC) $21.30

Piston Rings, Gas - For one Piston. Standard bore (3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch, and Steel rail oil ring at 3/16 inch. Order 4 for a complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 108791, Ref: EAF6149A) $31.00

Piston Rings, Standard, 192-201 CID Gas - For Tractor Models 4000, 4600 (with 192 and 201 CID Gas 3-Cylinder), 5000, 6600 (with 256 CID Gas 4-Cylinder). All engines with a 4.4 inch Standard Bore. This Ring Set is for one Cylinder. (Item #: 120770, Ref: CFPN6149BG) $21.30

Exhaust System

Elbow to Exhaust Manifold Gasket - For 172 CID gas engines 1958-1964 on Models: 800, 801, 900, 901, 4000. Use with elbow 310075 and muffler 310079. Priced each. (Item #: 121816, Ref: 310074) $2.30

Exhaust Elbow - Exhaust Elbow. Outlet 2 inch outside diameter. For tractor models 4000, 801, 901, with 172 gas engines. Replaces 310075, 310075F. For gasket, order 121816 (Item #: 101519, Ref: 310075WG) $23.20

Exhaust Extension Pipe, Black Enamel - This Exhaust Extension Pipe is 13-1/2 inches long. If fits between the manifold and muffler. USed with 131545 muffler. Back Enamel Finish. Replaces D0NN5B255C. (Item #: 131546) $27.50

Exhaust Manifold Elbow - Gasket - Fits 134 CID Gas Engines 1953 to 1964 on models: NAA, 600, 601, 700, 701. 172 CID Gas Engines 1955 to 1957 on models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Item #: 121815, Ref: NAA55232A) $2.10

Exhaust Manifold Gasket - For tractor models 550, 555, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 4000, 4600 with C5NE9430A manifold uses 1 gasket and models 8000, 8600, 9000, 9600 with C9NN9430B and C9NN9431B manifolds uses 2 gaskets. (Item #: 101521, Ref: C5NE9448A) $6.50

Exhaust Pipe - For Ford tractor models 801, 901, 4000 (gas-172), Replaces manufacturer number FOE-20, Horizontal 31-1/2", Inlet I.D.: 1-5/8", Outlet O.D.: 1-3/4", One Piece Assembly, (Item #: 111034) $88.00

Exhaust Pipe - For Ford tractor models 901 ('58 - '62 W/172 CID Gas and Select-O-Speed Trans), 4000 ('61 - '64 Row Crop W/172 CID Gas and Select-O-Speed Trans), Replaces Ford OEM number 311467, Horizontal length: 27", Vertical length: 18", Inlet I.D.: 1-3/4", Outlet O.D.: 1-3/4", From Muffler To Tailpipe, (Item #: 115464) $38.20

Extension Pipe - Vertical Two-Piece Exhaust Pipe with Clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5/8 inch inside diameter, outlet 1-3/4 inch outside diameter. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 115465, Ref: M105) $53.00

Extension Pipe, Curved - Outlet Pipe, curved section. Not for row crop or grove. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). (Item #: 115454, Ref: 311051) $35.90

Extension Pipe, Straight - Outlet Pipe Extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). Not for row crop, grove, select-o-speed. (Item #: 115475, Ref: 311050) $35.90

Extension Pipe, Straight - Outlet Pipe Extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines, row crop models. Tractors: 901, 4000 (4 cylinder 1958-1964). Not for select-o-speed. (Item #: 115477, Ref: 311466) $41.50

Intake and Exhaust Manifold Gasket, Diesel - For 172 CID diesel engine Models: 800, 801, 900, 901, 4000. All 1958-1964. Pack of 4. (Item #: 185549, Ref: 310658) $8.80

Intake and Exhaust Manifold Gasket Set - For Gas Engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Contains two manifold gaskets, two different size carburetor to manifold gaskets, and elbow gasket. Replaces NAA55232A, 87018642, C0NN9448C (Item #: 101517, Ref: C0NN9448C) $6.50

Manifold, Exhaust, Horizontal - Horizontal Exhaust for the following 1965 and newer tractors with 3 Cylinder Gas or diesel: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 4000, 4600. Exhaust pipe fits over manifold outlet. **DOES NOT COME WITH GASKET** Order Gasket part number C5NE9448A. (Item #: 101523, Ref: C5NE9430A) $46.50

Manifold, Gas - Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Order the gaskets (C0NN9448C) separately. (Item #: 101516, Ref: TFM9425WG) $100.00

Manifold Nut and Washer Kit - This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Item #: 153429, Ref: 33817-KIT) $9.40

Manifold, Vertical - This Vertical Exhaust Manifold is for 3 Cylinder Gas or Diesel Engines used in models 2000, 3000, 4000. The Exhaust Pipe fits inside Manifold Outlet. Part number D0NN5B255C can be used. Manifold Outlet Gasket not included (part number C5NE9448A). (Item #: 101520, Ref: C5NE9430E) $48.58

Muffler - Oval Muffler, Aluminized. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, overall length 29 inch. For model 4000. (Item #: 100585, Ref: C5NN5230AJ) $82.11

Muffler - Horizontal Oval Muffler, Aluminized. Inlet 1-3/4 inch inside diameter, Outlet 1-3/4 inch outside diameter, Outlet Pipe length 8 inches, overall length 20-1/2 inches. For 2000, 2600, 3000, 3600, 4000, 5000. (Item #: 100576, Ref: C7NN5230G) $50.00

Muffler - Vertical Round Muffler, Aluminized. This high quality Muffler has Internal Baffles. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter. Dimension A = 29 inches overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 100575, Ref: C7NN5230JM) $42.00

No
Picture
Muffler - Vertical Oval Muffler. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter, 39 inches overall length. For 2000, 3000, 4000, 4100, 4600, 5000, 6600. (Item #: 100588, Ref: D5NN5230D-E) $105.00

Muffler - Oval Muffler, for Vertical Exhaust System, Aluminized. Body 4 1/2 inch X 9 inch shell dimension, 26 1/2 inch shell length, 41 inch overall length, 6 inch inlet length, 1 7/8 inch inlet inside diameter, 8 1/2 inch outlet length, 2 inch outlet outside diameter. For tractor models 2910, 3610, 4000, 4100, 4110, 4600, 4610, 4630, 5000, 515, 531, 535, 5600, 5700, 6500 late 6600, 6700. (Item #: 182588, Ref: E4NN5230GB) $188.95

Muffler - A=42 inch, B=7 inch, C=27 inch, D=8 inch, 1-7/8 inch inlet, 2 inch outlet. For tractor models 4000, 5000, 4100, 4600, 4610, 5000, 5600, 5900, 6600, 6700, 650, 6500 late style, 515, 531, 535. Muffler. Highest quality. Black Enamel Finish. (Item #: 100592, Ref: S.14520) $100.00

Muffler - High quality muffler for 2000, 3000, 4000 (except Rowcrop), 5000 (except Rowcrop), 5500, 5550, 5900. Overall length 41-1/2 inches, body length 15-1/2 inches, inlet tube 13 inches, outlet 2 inch outside diameter, 12-1/2 inches vertical. This muffler may come in black or aluminum color finish, depending on availability. Replaces DHPN5230A, D0NN5B255C, C7NN5230R, 81817063 (Item #: 165442, Ref: C5NN5230R) $56.00

Muffler - For Ford tractor models NAA, 501, 600, 700, 800, 900, 2000, 4000, Replaces OEM number FO12, AFD1210, FO-12, Inlet Inside Diameter: 1 5/8", Outlet Outside Diameter: 1 3/4", (Item #: 100580) $79.00

Muffler and Pipe Assembly - For the following 144 cubic inch diesel tractors: 501, 601, 701. For the 4-cylinder 2000 series (1958-1964). Also for the following 172 cubic inch gas diesel tractors: 801, 901, 1801, the 4-cylinder 4000 series (1958-1964). This vertical two-piece muffler and pipe includes clamp. Custom design ready for assembly. Pipe inlet 2 inch inside diameter, outlet 2 inch outside diameter. (Item #: 182600, Ref: M1111) $83.00

Muffler and Pipe Assembly, Vertical - For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-1964. For the following 172 CID gas tractors: 800, 900, ALL 1955-1957 and the 4-cylinder 4000 series 1958-1964. This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5/8 inch inside diameter (verify that you have a 1 5/8 inch exhaust elbow), outlet 1-3/4 inch outside diameter. The order of this exhaust system is exhaust elbow (not included) exhaust pipe, then muffler above the hood. (Item #: 100580, Ref: M103) $79.00

Muffler, Black - Round muffler, black. This high-quality muffler has internal baffles. Inlet 1-7/8" I.D. Outlet 2" O.D., DIM A = 29" overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Item #: 131545, Ref: C7NN5230JM-B) $49.98

Muffler Heat Shield - This is Muffler Heat Shield is exactly like the original. It is used on Ford Tractors with 134, 172 and 192 4-cylinder gas and diesel engines, 1953 - 1964. It is 25-3/4 inch long. Has a red powder coat finish. Replaces original part number NCA5290A (Item #: 153378, Ref: NCA5290A) $55.00

Muffler, Horizontal - Oval body. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 19-1/2 inch overall length. For 3 cylinder diesel models: 3230, 3430, 3930, 4130, 4610, 4000 (1965 to 1974), 4610SU. (Item #: 100595, Ref: C7NN5230H) $88.00

Muffler, Horizontal - For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4 inch, inlet tube 1-5/8 inch ID, shell length 13 inch, shell diameter 3-1/4 inch, outlet tube length 2-1/4 inch, outlet tube outside diameter 1-5/8 inch OD, muffler overall length 17-1/2 inch. (Item #: 100570, Ref: NAA5230E) $25.10

Muffler, Horizontal - 2 inch inlet inside diameter, 1-7/8 inch outlet outside diameter, 13-1/2 inch shell length, 17-1/2 inch overall length, 3-1/2 inch body diameter. For tractor models 1801, 2000, 4000, 501, 601, 701, 801, 901. (Item #: 100583, Ref: 310079) $29.00

Muffler, Vertical - Oval Muffler for a Vertical System. Oval muffler, aluminized. Inlet 1-7/8" I.D. Outlet 2" O.D., 29" overall length. For gas and diesel engines. . For tractor models: 2000, 3000, 4000, 4100, 4600, 5000, 6600. Must be used with C3NN5255B adapter. Replaces C5NN5230AR, E4NN5230GA17M, E4NN5230GB, FO-5 (Item #: 100573, Ref: C5NN5230AR) $73.00

Pipe - Inlet Adapter Pipe, 13-1/2 inches overall length. For tractor models 2000, 3000, 3500, 4000, 5000. (Item #: 191361, Ref: D0NN5B255C) $29.80

Pipe - Inlet Adapter Pipe for vertical exhaust, 15-1/2 overall length, 1 7/8". Replaces DONN5B255D, EFC3NN5255B, C3NN5255B (Item #: 100574, Ref: D0NN5B255D) $19.20

Tail Pipe - For Ford tractor models 801 ('58-'62 W/ 172 CID Gas and Select-O-Speed Trans), 4000 ('61-'64 W/ 172 CID Gas and Select-O-Speed Trans), Replaces Ford OEM number 313808, 56" Long, Inlet I.D.: 1-3/4", Outlet O.D.: 1-3/4", Used From Outlet Pipe To Rear, Exhaust Pipe use Item #: 115454, (Item #: 115476) $36.10

Tall Pipe - For Ford tractor models 901 (RowCrop '58 - '62), 4000 (RowCrop '61 - '64), Replaces Ford OEM number 313809, For 172 CID Gas Engine With Select-O-Speed, Inlet I.D.: 1-3/4", Outlet O.D.: 1-3/4", Length: 60", (Item #: 115478) $34.00

Vertical Exhaust Assembly - For tractor models: Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier). All with gas engines. Two piece assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3/4 Inch OUTLET DIAMETER, 1 5/8 Inch INLET DIAMETER. (Item #: 115465, Ref: FDE170) $53.00

Vertical Exhaust Pipe - This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1-3/8 inch I.D., outlet 1-1/2 inch. It is for gas models NAA, 500, 501, 600, 700, (4 cylinder 2000 and 4000 1953 to 1964), 800, 900. All with the 134 and 172 cubic inch engines. (Item #: 111035, Ref: NAA55237A) $42.00

Vertical Muffler and Pipe Assembly - For tractor models 1964 and earlier 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11/16 inch inlet and 1 3/4 inch outlet. This is one piece welded construction. FO-21 (Item #: 100579, Ref: FD2110) $113.00

Fuel System / Air Intake

Adjustable Needle Assembly - 3/8 inch x 24 thread. Main Adjusting Needle. For tractor models: 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 1958 to 1964 with 172 cubic inch engines with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. Replaces 311605. (Item #: 108463, Ref: C3NN9G504A) $25.90

Air Cleaner Assembly - For 4000, 5000 (1965-1974), 4100 (1975-1981). Air Cleaner Assembly, Oil Bath Type, 7 inches diameter, 2.25 inch diameter inlet. (S.61385) (Item #: 155833, Ref: C5NE9600E) $69.00

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 531, 5600, 5610, 5700, 540, 6000, 6600, 3600V, 4000SU, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600SU, 5100, 5200, 5340, 5900, 6610, 6700. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794. (Item #: 157279, Ref: R28794) $7.80

Air Cleaner Clamp - Air cleaner oil cup clamp 4 1/2 inches. For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Item #: 111916, Ref: 311508) $15.10

Air Cleaner Cover - Twist locks into top of air cleaner. Diameter 6 1/4 inches. For tractor models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND: 230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS/DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS/DIESEL), 445, (515 GAS/DIESEL), 530A, 531, (532 GAS/DIESEL), 545. NOTE: FORD HAD MORE THEN ONE COVER PLEASE COMPARE YOUR TAB DEPTH AND DIAMETER BEFORE ORDERING. (Item #: 113721, Ref: C5NE9661A) $82.00

Air Cleaner Funnel Screen - Air Cleaner Funnel Screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964). TIS (Item #: 126374, Ref: NAA9669A) $5.00

Air Cleaner Grille Door with Screen and Thumb Screw - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NAA9661B, NAA9669A, Includes: Air cleaner grille door, screen and thumb screw, (Item #: 126375) $22.00

Air Cleaner Hose - Rubber air cleaner to carburetor hose is not like original metal tube. VERIFY THE INSIDE DIAMETER AT 1.5 Inches, 18 inches in length (20.5 inches following the curves). For tractor models using 134/172 gas engine: 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Item #: 173789, Ref: 311112) $41.00

Air Cleaner Hose, Lower Outlet - 2 1/4 inch inside diameter on one side, 2 inches on the other. For tractor models 2000, 3000, 4000. All with diesel engines. (Item #: 164359, Ref: C5NN9B640B) $13.80

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. For clamp style air cleaners, not clip style. For Ford models 1957 to 1964 with 172 cubic inch gas engines. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.60

Air Cleaner Oil Cup - For Ford tractor models 501, 541, 601, 611, 620, 621, 631, 641, 651, 700, 800, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Replaces Ford OEM number 311510, Height: 3.00", ID: 4.46", OD: 4.75", Color: Blue, (Item #: 172462) $33.70

Air Cleaner Oil Cup, Inner - Fits Oil Cup 311510 4-3/8 inch inside diameter. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Item #: 112021, Ref: 311506) $12.00

Air Cleaner Tube - Metal Tube is 90 degree with 2 inch outside diameter. For gas and LP models: 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4000 4 cylinder, 4030, 4040, 4121, 4130, 4131, 4140. All 1958 and up. Replaces: 86531351, 311092. (Item #: 126389, Ref: 311092) $38.70

Air Filter Element, Inner - Outside diameter top is 2-1/8 inches, outside diameter bottom 2-9/16 inches, inside diameter top 3/8 inches, inside diameter bottom 1 7/8 inches, height 10-5/16 inches. Inner Filter fits GAS tractors: (2000, 3000, 4000 all 1/1973>) 2600, 3600, 4600, 2610, 3610, 4610. Industrials: (2110LCG, 3400, 3550, 4110LCG, 4400, 4500 all 1/1973>), 230A, 231, 335, 340A, 420, 445A, 515, 531, 532, 535, 545. DIESELS: (3400, 3500, 3550 all 1/1973>), 335 (up to 5/1976), 420, (515, 531, 532, all up to 5/1976), 535, 550, 6500. Replaces D2NN9R500A515. (Item #: 121321, Ref: E6NN9R500DA) $51.00

Air Filter Element, Outer - Outside diameter 4 1/2 inches, inside diameter 2 1/4 inches, height 10 11/16 inches. Outer Filter fits GAS tractors: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. Industrials: 2110LCG, 230A, 231, 3400, 3500, 3550, 335, 340A, 4110LCG, 4400, 4500, 420, 445A, 515, 531, 532, 535, 545. DIESELS: 3400, 3500, 3550, 335 (up to 6/1976), 420, (515, 531, 532, all up to 5/1976), 535. Replaces 1026131M92, D0NN9B618B, AF492, D0NN9B618B, C5NE9A641A, E6NN9B618AB, 81823386, E6NN9B618AA, C7NN9A641A, C7NN9A641C, D2NN9R500A. (Item #: 121320, Ref: E6NN9B618AA) $22.40

Air Filter, Outer - For tractor models (550, 555 from 1975 to 7/1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4/1976 and later). Measures 11.45 inches long, 5.30 inch outside diameter, 3.03 inch inside diameter. Replaces D5NN9601A, D5NN9601B, D6NN9601A, E6NN9601A, E9NN9601BA, 83908364, 3414560, 0003414560, AZA194, 9583, CR9583, 9583M, P526500, LAF8551 (Item #: 121138, Ref: D6NN9601A) $17.50

Air Funnel - For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960, (2000, 4000 ALL < 1964). (Item #: 151929, Ref: NAA9684A) $27.70

Air Hose to Carburetor - 2 Inch - For tractor models 601, 701, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000 series. All 1958 and up. For tractors using 2 inch metal pipe. (Item #: 159583, Ref: 311107) $6.40

Banjo Bolt - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 420, 445, 445A, 450, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B, Replaces Ford OEM number 21470ES80, D1NN9R523A, D1NNR523A, 81825730, Replaces Case IH OEM number 81825730, D1NN9R523A, (Item #: 181440) $7.80

Breather Cap - For Dry-Type Air Cleaners on gas tractors. For 4000 less 4500 gas, 5000, all 1965-1975. 2 1/4 inch diameter Pre-Cleaner Assembly. (Item #: 112383, Ref: C5NN9A660A) $14.00

Breather Cap - For Dry-Type Air Cleaners on gas tractors (2000, 3000, 4000, all 1965-1975), (2600, 3600, 4600, 231, 335, 515, 531, 532, all 1975-1981). For Oil Bath Cleaners on Diesel Tractors 2000, 3000 except 3500 and 3550, 4000 except 4500, all 1965-1975. For 2600, 3600, 231, 233, 333, all 1975 to 1981. Breather Cap for 2 inch air Intake Pipe. Cap is 6 1/2 inches tall. (Item #: 112384, Ref: C5NN9A660B) $13.90

Carburetor - Zenith carburetor outperforms the original carbs used on: 801 and 901 AFTER serial number 126523, and Model 4000 1962-1964 with a 172 cubic inch engine. This Zenith carb replaces 013875, 13875, 500715, 55807010, C0NN9510C, C0NN9510G, CONN9510C, CONN9510G, R0202, TSX813, and 17A57. Center to center on the 2 mounting bolts is 2 3/4 inches. Fuel inlet is 7/16 inches. Made in USA, 1 year warranty. (Item #: 100754, Ref: 13875) $416.00

Carburetor - This is a new Original Marvel-Schebler Design carburetor. It Replaces carburetors marked TSX662, TSX769, TSX813 or TSX977. Center to center on the 2 mounting bolts is 2 11/16 inches. Fuel inlet is 7/16 inches. Note, TSX813 and TSX662 use 3/8 inch fuel bolt. If replacing one original TSX813 or TSX662, you will need to replace your sediment bowl and your banjo bolt to 7/16. Used on Ford 172 Gas Engines 1957 - 1964. Replaces Ford / New Holland numbers: 310015, 312955, C0NN9510C, C0NN9510G (Item #: 184573, Ref: TSX813) $377.00

Carburetor - Zenith Carburetor Ford 4000 1968up 3Cyl 201 Engine, Zenith Carburetor 13912 replaces and outperforms the original Holley and Zenith carburetors numbers C5NN9510N, C5NN9510R, C7NN9510A, C9NN9510C, C9NN9510D, D3NN9510C, D5NN9510A, R3210, R3657, R3658, R3658A, R4101, R4111, R4111-1A, R6852, R8554, 17A559, 13912. Uses kit number Z107 and float number R4531. Center to center on the 2 mounting bolts is 2 11/16 inches. The measurement form the center of the throttle shaft to center of ball is 3/4 inch. Made in USA, 1 year warranty. (Item #: 100762, Ref: 13912) $605.00

Carburetor - Zenith Carburetor Ford 4000 1968up 3Cyl 201 Engine, Zenith Carburetor 13917 replaces and outperforms the original Holley and Zenith carburetors numbers R4102, 13917, 17A558. Uses kit number Z107 and float number R4531. Center to center on the 2 mounting bolts is 2 11/16 inches. The measurement form the center of the throttle shaft to center of ball is 1 inch. Made in USA, 1 year warranty. (Item #: 100762, Ref: 13917) $605.00

Carburetor Float - For 800, 801, 900, 901, 4000. Carburetor Float with Marvel Schebler with 172 Engine large bowl measures 2 3/4 inches at widest point. Replaces OEM part number 311608. (Item #: 105095, Ref: R2383) $19.50

Carburetor Float, Holley - This Carburetor Float is for Holly Carburetors: 2871, 2871-1, 3257, R3210, R3656A, R3657, R3658, R4111, R4111A, R4119, R4119A, R4120, R4120-1, R6852, R6853, R7867, R7896, R8552, R8553, R8554. Tractors: 2000 (3 cylinder), 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3310, 3330, 3600, 3610, 4000 (3 cylinder), 4100, 4110, 4600, 4610, 5000, 5100, 5200, 6600. Industrials: 230A, 231, 335, 340, 420, 445, 530A, 531, 535, 545, 550, 555A, 555B, 3400, 3500, 4400, 4500. Replaces: 81810964, C5NE9550A, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA. (Item #: 108458, Ref: C5NE9550A) $34.00

Carburetor Float, Zenith - This Float is used in the following Zenith Replacement Carburetors (not original Marvel Schebler): 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Carburetor Gasket Set - For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 182490, Ref: EAE9502) $6.50

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877 (Item #: 183586, Ref: BK44V) $27.60

Carburetor Kit, Basic - Carburetor Kit - Basic - For 801, 901, 4000 all with 172 CID and Marvel-Schebler TSX662, TSX769, TSX813, TSX966, TSX977 Includes Gaskets, Needle, Seat and Throttle Shaft. Basic Carburetor Rebuild Kit (Item #: 182483, Ref: BK47CV) $29.00

Carburetor Kit, Basic - Kit for Marvel TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 carbs used on 2000 4 cyl., 2N, 4000 4 cyl., 600, 601, 605, 611, 612, 621, 630, 631, 640, 641, 644, 650, 651, 655A, 655C, 655D, 655E, 660, 661, 671, 675D, 675E, 681, 685, 700, 702, 724, 725, 730, 735, 740, 741, 743, 744, 745, 745S, 750, 755, 755A, 755B, 765, 766DT, 771, 775, 785, 800, 801, 811, 820, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 8N, 9N, NAA, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Basic - Kit for Zenith carbs used on 2000 3 cylinder, 3000 3 cylinder, 4000 3 cylinder, 2600, 3600. Used on the following carburetors: 11637, 13358, 13466, 13486, 13501, 13502, 13519, 13520, 13521, 13524, 13550, 13584, 13596, 13628, 13628D, 13630, 13631, 13641, 13644, 13652, 13652C, 13683, 13700, 13707, 13724, 13745, 13758, 13760, 13760A, 13772, 13775, 13786, 13807, 13867, 13868, 13869, 13886, 13891, 13912, 13913, 13914, 13914A, 13915, 13916, 13917, 13920, 13940, 13958, 13963, 13974, 13987, 13999, 14000, 14001, 14022, 14023, 14034, 14039, 14039A, 14041, 14126, 14140, 14143, 14151, 14155, 14171, 14172, 14200, 14997, E1NN9510AA, E1NN9510BA, E1NN9510CA, E1NN9510DA, E1NN9510EA, E1NN9510FA (Item #: 100744, Ref: Z107) $31.80

Carburetor Kit, Basic - Kit for Marvel TSX662, TSX769, TSX813, TSX977 used on 4000 4 cyl., 800, 801, 811, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Item #: 100734, Ref: MS102) $15.30

Carburetor Kit, Basic - Kit for Zenith 12902, 13875 carburetors. (Item #: 100741, Ref: Z104) $23.60

Carburetor Kit, Basic - Kit for Holley R4119-A, R4119-1A, R7867, R3656A, R3655A, R6863, R7896, R3657, R4111, R4111-1A, R6852, R8554, R3210, R3658, 12R3598B, 12R3589B carbs on 2000 3 cylinder, 3000 3 cylinder, 4000 3 cylinder, 5000. (Item #: 100726, Ref: H101) $22.30

Carburetor Kit, Basic - For all Holley carburetors on Models Ford / New Holland TRACTOR: 2000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656, Ford / New Holland TRACTOR: 3000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656, Ford / New Holland TRACTOR: 4000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656. CKPN9590B R3210, R3656A, R3657, R3658, R4111A, R4119A, R4120-1, R6852, R6853, R7867, R7896, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA, R3589B, ; Ford models with Holley carb number: LIST6852, R3012, R3013-4A, R3158A, R3210, R3658, R3658A, R4111, R4111-1A, R4119, R4119-1A, R4120, R4120-1, R4120-1A, R6863, R8552, R8553, R8554 (Item #: 182533, Ref: ABC427) $44.00

Carburetor Kit, Basic - Holley carbs. For tractor models 2000, 3000, 4000, Ind. 2110LCG, 3400, 3500, 4110LCG, 4400, 4500, 231, 233, 333, 335, 340, 340A, 420, 445, 515, 531, 532, 540, 540A, 545, 550, 555, 555A, 555B. Replaces CKPN9591A. (Item #: 182790, Ref: CKPN9591A) $39.00

Carburetor Kit, Basic - This Basic Carburetor Kit Includes Gaskets, Needle and Seat, and Diaphragm. It is used on Zenith carburetor numbers 13486, 13912, 13913, 13914, 13915, 13916, 13920, 14997 (Item #: 100744, Ref: Z107) $31.80

Carburetor Kit, Complete - Includes: Gaskets, Needle, Seat, Throttle Shaft, and Pump Plunger For Holley carburetors on Models Ford / New Holland TRACTOR: 2000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656, Ford / New Holland TRACTOR: 3000 (1965-9/1966 with Holley Carb. numbers: #List6863, List8554, R3655, R3656, R3657, R4111, R4119, R4120, R8552, R8553, R8554 - Includes: Gaskets, Needle, Seat, Throttle Shaft, and Pump Plunger (Item #: 182494, Ref: R0220) $54.00

Carburetor Kit, Comprehensive - For tractor models with 172 gas engine 1958 to 1960 prior to serial number 126524. Carburetor part number: Marvel-Schebler TSX769, TSX813, Ford 312955 1962 to 1964 after serial number 126524. Carburetor part number: Marvel-Schebler TSX813, Ford 312955. For: 801, 901, 4000. Does not include float. (Item #: 112442, Ref: C547CV) $50.00

Carburetor Kit, Comprehensive - Contains all parts necessary for major overhaul (less throttle shaft and float). For 4000, 4600, 4610. All using Holley R4111 or R8554 carburetor (Ford part number C7NN9510A or D8NN9510CA). (Item #: 150413, Ref: HCK02) $27.80

Carburetor Kit with Throttle Shaft - For Ford tractor models 2000 (3 cylinder), 3000 (3 cylinder), 4000 (3 cylinder), 5000, Replaces Ford OEM number CKPN9590C, 603597, 603605, A603597, A603605, HCK02, 1103-0071, CK9N9590B, For Holley carburetor numbers: R2923-1A, R3210, R3655, R3656-A, R3657, R3658, R4111, R4111-1A, R4119-1A, R4119-A, R4120, R4120-1, R6852, R6863, R7867, R7896, R8552, R8553, R8554, Includes throttle shaft, (Item #: 113802) $81.00

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX813, TSX662. For the following tractor models: 801, 901, 4000 Early. Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 203258, Ref: 1312-CARB) $255.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX692. For the following tractor models: 601, 701, 800, 900, 2000 EARLY, 4000 Early. Add $100.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 203256, Ref: 1314-CARB) $225.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13912, 13913, 13914. For the following tractor models: 2000, 3000, 4000 (with DIAPHRAM). Center-to-Center on the mounting bolts is 2 11/16 inches. Add $125.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 203260, Ref: 1320-CARB) $265.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12R3598B, LIST4111-1, R4111-1A, R6852, C9NN9510C. For the following tractor models: 4000 (1965-1975), 4600 (1975-1971), 4610. Center-to-Center on the mounting bolts is 2 5/8 inches. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203261, Ref: 1321-CARB) $265.01

Carburetor Throttle Shaft Arm - Holley R3658A - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 5000, 5100, 5190, 5200, 5340, 6600, Compatible with Ford Construction and industrial models 231, 333, 335, 420, 515, 531, 535, 5500, 5550, Replaces Ford OEM number C9NN9581B, Carburetor Throttle Shaft Arm, Fits Holley carburetors R3658A, (Item #: 113614) $15.98

Choke Cable - 48.00 inch total length. For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 231, 2110LCG, 335, 3400, 3500, 420, 4110LCG, 4400, 4500, 515, 535. (Item #: 113987, Ref: C5NN9700C) $9.50

Choke Knob - For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. 10-32 thread. (Item #: 178058, Ref: 9N9703) $5.40

Choke Rod Assembly - This is the Carburetor Choke Control Rod Assembly for Ford tractors 1953-1964. Uses 9N9703 or 9828014 knob. Approximately 26-7/16 inches long. Not included. Replaces NAA9705B. (Item #: 182994, Ref: NAA9705) $18.20

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cyclone Air Cleaner Glass Jar (jar only) screw on type. Exactly like original for tractors that used the "Cyclone" air cleaner only. (Item #: 178043, Ref: 230056) $34.20

No
Picture
Cyclone Air Cleaner Glass Jar Seal - Cyclone Air Cleaner Glass Pint Jar Seal (Item #: 184394, Ref: ACP1248) $2.30

Cyclone Cup and Spring Assembly - Only for those tractors (1939 to 1964) that used the CYCLONE Air Cleaner Assembly which MAY include: 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Verify the type of air cleaner you have before ordering. (Item #: 178172, Ref: 230053) $18.10

Friction Disc for Throttle Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Item #: 111446, Ref: C5NN518B) $1.80

Fuel Bowl - Fuel bowl. 1 1/2 inches diameter bottom and 1 7/8 inches long. For tractor models (4 cylinder engines) 600, 800, 900, 1801, 2000, 4000, 501, 601, 701, 801, 901. (Item #: 105385, Ref: 311276) $7.70

Fuel Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3415, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9700 Replaces Ford OEM number C5NN9030A, E7NN9030AA, , Compatible with New Holland tractor models TC30, Replaces OEM number 81811847, 83900753, 83904042, 83929889, 83947669, 83947845, 83961128, SBA360300080, D5NN9030A, D8NN9030BA, E1NN9030AA, E3NN9030AA, E6NN9030BA, For Diesel fuel only, (Item #: 153470) $8.98

Fuel Cap, Diesel - Cap. For tractor models 2000, 2600, 2810, 2910, 3000, 3600, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610SU, 5000, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E7NN9030AA. This is a non-vented cap. (Item #: 185782, Ref: D5NN9030A) $9.10

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3430, 3600, 3600V, 3610, 3900, 3910, 3930, 4000, 4030, 4031, 4040, 4100, 4110, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4500, 4600, 4600SU, 4610, 4630. (Item #: 184806, Ref: C5NN9030D) $9.00

Fuel Cap, Vented - This silver Fuel Cap is for Under Hood Fuel Tank. 2-7/8 inch outside diameter, 1/4 inch tall, Zinc finish, 1.788 inch edge of tang to edge of tang. Vented Verify OEM number for tractor models 1100, 1120, 1120, 1200, 1210, 1215, 1220, 1300, 1210, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 2110, 2120, 3415, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8530, 8630, 8700, 8700, 8830, 9000, 9200, 9700. Replaces 83961128, SBA360300080, E7NN9030AA. There are other Fuel Caps for some of these tractors please verify OEM number and measurements. (Item #: 184806, Ref: C5NN9030B) $9.00

Fuel Filter - Fuel Sediment Filter. For all 144 and 172 CID Diesel tractors 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. (Item #: 159728, Ref: 309991) $24.50

Fuel Filter Assembly, Double - Universal Double Fuel Filter Assembly fits most Ford Diesels 1965 and newer that use CAV type Double Filter Assembly. Comes complete with filters. Filter brands may vary. Replaces EBPN9N166AA, E5NN9165BA, C5NN9165C and D2NN9165C. This assembly has two connections on each side to accommodate 1 inlet and 1 outlet ON EACH SIDE. You may have to reconfigure your inlet and outlet hoses. 1/2 inch x 20 UNF Ports. Outer ports in, inner ports out. (Item #: 113747, Ref: S.60426) $28.40

Fuel Filter Assembly, Single - This Fuel Filter assembly comes with a metal bowl. For Diesel tractors using CAV type injection system. Includes filter. Uses replacement filter CAV7111296. (Item #: 115053, Ref: S.60425) $19.60

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $26.40

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.10

Fuel Filter, CAV type - Fuel Filter for tractor models (6500, 750, 7500, 650 all from 1973 and up), (2000, 3000, 4000, 5000, 7000 all from 1965 and up), (8000, 9000 both from 1968 and up). Replaces: 81823491, 83937061, C5NE9176C, C7NN9176A, D0NN9176A, D0NN9176B, D0NN9N074B, D8NN9N0974AA, EDPN9N074AA . NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Ford: 2000, 2100, 2110, 2120, 2300, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210 (Item #: 179631, Ref: D2NN9N090B) $8.00

Fuel Filter Valve Stem to Carb Body Gasket - Gasket measures 0.389 inch inside diameter, 0.579 inch outside diameter, 0.062 inch thick. Made of fiber. For tractor models 2000 4 cylinder (4-cylinder), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 2030, 2031, 2110, 2111, 2120. (Item #: 172804, Ref: NCA99180B) $1.00

Fuel Filter Valve Stem to Carb Body Gasket - 0.443 inch inside diameter x 0.600 inch outside diameter x 0.047 inch thick. Fiber gasket. For tractor models 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140 (172 cubic inch gas engine with serial number 126525 and up), (6000 gas late 9/1960 and up). (Item #: 173184, Ref: NCA99180A) $1.50

Fuel Injection Pump, Remanufactured, B9NN9A543B, Roosa Master, DBO-2933 - For Ford tractor models 800, 801, 841, 851, 861, 881, 901, 941, 961, 971, 2000, 2130, 4000, Compatible with Ford Construction and industrial models 4040, Replaces Ford OEM number B9NN9A543B, C0NN9A543J, DKPN9A543A, Replaces Roosa Master manufacturer number DBO-2933, DBGVCC429-4C, DBGVCC429-5C, DBGVCC429-8AJ, DBGVCC429-14AJ, DBGVCC429-4AJ, DBGVCC429-5AJ, (Item #: 209982) $1350.01

Fuel Injector, Remanufactured, C5NE9F593C, C5NE9F593CRDS - For Ford tractor models 2000, 2110, 2120, 2300, 3000, 3055, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5190, 5340, 6000, Compatible with Ford Construction and industrial models 3550, 4140, Replaces Ford OEM number C5NE9F593C, C5NE9F593CRDS, For a New version of this sku use Item #: 119903, (Item #: 210587) $95.01

Fuel Injector Sea - Seal, fuel injection adaptor. For 4000, 601, 701, 801, 901. (Item #: 178904, Ref: 312070) $22.60

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Item #: 156291, Ref: C5NE9F596A) $2.10

Fuel Line - This Fuel Line is accurate for replacement of part numbers NCA9282D / New Holland 86593249. 5/16 inch line. Overall length is 15 1/2 inches. It is used on Ford 800 and 900 series tractors with 172 cubic inch gas engines. It may also be adaptable for 1959-1964 Ford tractors with 172 cubic inch engines. Verify 5/16 inch fuel line. Will fit into C0NN9285A-WOR. If 1/4 inch fueling fittins are needed use 310918. (Item #: 158212, Ref: NCA9282D) $19.30

Fuel Pump - For tractor models (2000, 3000, 4000, 5000 1965 and up), 2100, 2110, 2120, 2150, 2300, 231, 2310, 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 335, 3400, 3600, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4600, 5000, 5100, 515, 5190, 5200, 531, 5340, 5500, 5550, 6600. All with gas engines. Replaces 81805929, C5NE9350A, D5NN9350B, D5NN9350BGV, F2NN9350AA. (Item #: 108321, Ref: F2NN9350AA) $33.00

Fuel Sediment Bowl Assembly - This new Sediment Bowl Assembly is used on Ford Gas Tractors 1965 and later. It replaces original part number D4NN9155A. Replaces 83416255 Connector, C5NE9165D Cover, D4NN9155A Filter Assembly, C5NN9160A Gasket, C5NN9176A Filter, 86508531 Bowl, D4NN9C297A Bail. (Item #: 155996, Ref: D4NN9155A) $48.00

Fuel Shut-Off Cable - Cable is 60 inches long. For 3-cylinder (1965>) tractors: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630. Replaces C5NN9C331H, E5NN9C331EA. (Item #: 121221, Ref: S.67059) $8.30

Fuel Shut-Off Cable - Cable Assembly, Fuel Shut-Off, 60 inch long. For Diesel Tractors 2000, 3000, 4000, 5000, 7000, (1965 to 1975); 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 233, 333, 335, 515, (1975 to 1981); 4610, 5610, 6610, 7610, 7710, with quiet cab (1981 to 1991). (Item #: 121221, Ref: E5NN9C331EA) $8.30

Fuel Shut Off Valve - With O-Ring, at fuel tank. Has 5/16 fuel line fitting. For 172 CID gas engine in tractors with serial number 126525 and up, models 801 Series, 901 Series, 4000, (1960 to 1964). Also used on some later 2000 4 cylinders with 134 engines. (Item #: 107025, Ref: C0NN9285A-WOR) $36.00

Fuel Shut Off Valve - Valve has 3/8 inch female outlet. For gas powered tractor series: 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 2000 (1955-1964), 800, 801, 900 (to serial number 126524 with 1/4 inch fuel line 1955-1960), diesel powered tractors (500, 600, 700, 800, 900, 2000, 4000) series (1958-1964). Uses fuel line 310918 or NCA9282B, 311292. (Item #: 107024, Ref: 311292WOR) $20.00

Fuel Tank - New Fuel Tank with sending unit hole. Depending on the tractor model, this tank may have a smaller capacity than the original. Sending unit not included. Use part number 310938. Fits 2000 (4 cylinder 1962-1964), 4000 (4 cylinder 1962-1964), 601 Series, 701 Series, 801 Series, 901 Series. Replaces B9NN9002B, C0NN9002D, C0NN9002N, NAA600800G, NAA9002E. This tank is for gas application. It can be used for diesel if you install a diesel return line. Length: 28 inches with flange, 26 inches tank only. Width: 16 inches Narrow End, 19 inches Wide End, Depth: 7-1/2 inces at filler neck. (Item #: 152217, Ref: NAA600800GWS) $190.00

Fuel Tank - For: 3500, 3550, 4000, 4400, 4500, (4600 and 4610 all purpose), (2810, 2910, 3910, 4110 with four wheel drive, less cab), 340A 340B, 420, 445, 445A, 515, 535, 530A, 540A, 540B. For Gas and Diesel. This tank uses C5NN9030D Cap, D8NN9A316KA Sending Unit, C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal, each sold separately. Replaces part numbers E3NN13N850AA, E3NN9002KA, E3NN9002KB, E2NN9002BA, 83943965, 83935630, C5NN9002AE, D5NN14N031B, 54677S100, 83961106. (Item #: 103894, Ref: E2NN9002BA) $160.00

Fuel Tank, Used - For Ford tractor models 3500, 4000, 4200, 4400, 4500, 4600 (1975-11/83 diesels), Compatible with Ford Construction and industrial models 420 (1975-11/83), 515 (1975-11/83), 535 (1975-11/83), 3550, Replaces Ford OEM number E2NN9002BA, E3NN9002KA, For a new version of this item use Item #: 103894, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441544) $113.01

Fuel Tank Valve - plastic handle - For Ford tractor models Major, Super Major, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5550, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8400, 8600, 9000, 9200, 9600, Compatible with Ford Construction and industrial models 230A, 233, 234, 340A, 340B, 345C, 345D, 550, 555 (DTC), 655, 5500 Replaces Ford OEM number D1NN9N024B, 83935915, 83917402, C5NN9N024A, D1NN9N024A, D2NN9N024C, E1ADDN9189B, E0NN9N024AA, E2NN9N024AA, E2NN9N200A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TT55, TT75, Replaces New Holland OEM number D8NN9N024AB, 81830037, 83926534, D8NN9N024AA, Plastic Knob, 1/2" Pipe Thread Inlet, 5/16" Tube Outlet, For brass handle use Item #: 181076, (Item #: 111712) $5.98

Fuel Tank Valve Tap - Metal Fuel Tap with Screen for Gas and Diesel: Major, Super Major, 2000 (1965 and up), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000 (1965 and up), 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5600, 5610, 5700, 5900, 6600, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30. INDUSTRIALS: 550, 555A, 555B, 655, 655A. Tank tap is 7/8" tapered by 14 pitch (1/2 pipe thread), fuel line is 1/2" by 20 pitch UNF (5/16 inch tubing nut). Replaces D1NN9N024B, 83935915, 83917402, C5NN9N024A, D1NN9N024A, D2NN9N024C, E1ADDN9189B, E0NN9N024AA, E2NN9N024AA, E2NN9N200A, D8NN9N024AB, 81830037, 83926534, D8NN9N024AA (Item #: 181076, Ref: E2NN9N024AA) $9.10

Hand Throttle Control Lever Spring - This Hand Throttle Control Lever Spring is used on Ford Tractors 1953-1964. It replaces original part number NAA9806B (Item #: 182958, Ref: NAA9806B) $5.70

No
Picture
Injection Line - #2 Cylinder - For Ford tractor models 2000 (3 cyl, 1/65-12/74), 2100 (3 cyl, 3/65-12/74), 2110 (3 cyl, 1/65-12/74), 2120 (3 cyl, 1/65-12/74), 2300 (3 cyl, 1/65-12/74), 2310 (3 cyl, 1/65-12/74), 3000 (3 cyl, 1/65-12/74), 3055 (3 cyl, 1/65-12/74), 3100 (3 cyl, 1/65-12/74), 3110 (3 cyl, 1/65-12/74), 3120 (3 cyl, 1/65-12/74), 3150 (3 cyl, 1/65-12/74), 3190 (3 cyl, 1/65-12/74), 3300 (3 cyl, 1/65-12/74), 3310 (3 cyl, 1/65-12/74), 3330 (3 cyl, 1/65-12/74), 3400 (3 cyl, 1/65-9/75), 3500 (3 cyl, 1/65-12/74), 3550 (3 cyl, 1/65-12/74), 4000 (3 cyl, 1/65-12/74), 4100 (3 cyl, 1/65-12/74), 4110 (3 cyl, 1/65-12/74), 4140 (3 cyl, 1/65-12/74), 4190 (3 cyl, 1/65-12/74), 4200 (3 cyl, 1/65-12/74), 4330 (3 cyl, 1/65-12/74), 4340 (3 cyl, 1/65-12/74), 4400 (3 cyl, 1/65-12/74), 4410 (3 cyl, 1/65-12/74), 4500 (3 cyl, 1/65-12/74), 5000 (4 cyl, 1/65-1/75), 5100 (4 cyl, 1/65-12/74), 5190 (4 cyl, 1/65-12/74), 5200 (4 cyl, 1/67-12/74), 5340 (4 cyl, 6/68-12/74), 7000 (4 cyl, 10/71-12/74), 7100 (4 cyl, 10/71-12/74), 7200 (4 cyl, 10/71-12/74), Replaces Ford OEM number C5NE9A556D, Ford #2 injector line, Fits 3 cylinder engines with CAV fuel injection pump, Fits some 4 cylinder engines with CAV fuel injection pump, (Item #: 169914) $18.60

No
Picture
Injection Line - #3 Cylinder - For Ford tractor models 3000 (1/1/71-9/30/75 with CAV pump), 4000 (4/1/68-later with CAV pump), Replaces Ford OEM number C5NE9A557E, C5NE9A557F, (Item #: 171583) $19.20

Injection Line, Cylinder 1 - For 4 cylinder models all built after 1-1-1958. Replaces 500734. (Item #: 162804, Ref: C0NN9A555E) $34.70

No
Picture
Injection Line, Cylinder 2 - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500736. (Item #: 162805, Ref: C0NJN9A556E_) $34.90

Injection Line, Cylinder 2 - For 4 cylinder models built after 1-1-1958. Replaces 500738. (Item #: 162805, Ref: C0NN9A556E) $34.90

Injection Line, Cylinder 3 - For 4 cylinder models all built after 1-1-1958. Replaces 500738. (Item #: 162806, Ref: C0NN9A557E) $34.80

No
Picture
Injection Line, Cylinder 4 - For 4 cylinder models all built after 1-1-1958. Replaces 500740. (Item #: 162807, Ref: C0NN9A558E_) $35.10

Injection Line Set, 3 Cylinder - Includes C5NE9A555D, C5NE9A556D, C5NE9A557E. For tractor models 2000, 3000, 4000 all 3 cylinder built after 1-1-1965 with CAV pump. (Item #: 162815, Ref: FPL100) $48.70

Injection Line Set, 3 Cylinder - Includes C7NN9A555G, C5NE9A556D, C5NE9A557E. For tractor models (3000 from 1-1-1971 to 9-30-1975 with inline injection pump), (4000 from 4-1-1968 and up with CAV injection pump). (Item #: 162817, Ref: FPL101) $39.00

Injection Pump - This Injection Pump is for FORD Models 4000, 4500, 4600, 4610, 555B, all with 3 cylinder 201 Diesel Engine. This pump replaces the OEM part number D6NN9A543GR. Replaces original pump CAV number 3233F390, 3833F390, DPA3233F300, DPA3233F390, DPA3233F650, DPA3233F651, DPA3233F652, D6NN9A543G. To ensure proper fit and function, CAV number must match exactly. (Item #: 121307, Ref: D6NN9A543G) $800.00

No
Picture
Injection Pump - Fuel Injection Pump. 201 engine. Tractors: 4000 (3 Cylinder), 4500, 4600, 4610. Industrials: 555B. Replaces D0NN9A543K. Reference number CAV3233F390. To assure proper fit the manufacturer number on the old part must match the manufacturer number on the new replacement part. (Item #: 121307, Ref: D0NN9A543K) $800.00

Injection Pump Cover Plate - This Cover Plate is used with CAV injection pumps. Replaces Ford OEM nos C7NN9G578A, 81827350, 83903026, 83926998, D2NN9G578A, D4NN9G578A, E0NN9G578AA (Item #: 113720, Ref: E0NN9G578AA) $55.00

Injector - New Diesel fuel injector. For tractor models 4000, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4500, 5000, 6000. Replaces D1NN9F593A, C7NN9F593BB. (Item #: 119903, Ref: C5NE9F593C) $52.00

Injector - New Fuel Injector. For tractor models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4400, 4500, 5500, 5550, 4000, 4000SU, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4410, 5000, 5100, 5190, 5200, 5340, 7000, 7100, and 7200. Uses C5NE9F596A seal and washer set, not included. Replaces C5NE9F593B, C5NE9F595A, C5NE9F595B, D0NN9F593AR, D0NN9F593ARDS, 81825599. (Item #: 119903, Ref: D0NN9F593A) $52.00

Injector Nozzle - Fuel Nozzle. 1800 Series, 2000 4 Cylinder 1962-1964, 2030 Compact Tractor, 2300, 2310, 3000, 3055, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550 Indust/Const, 4000 4 Cylinder 1962-1964, 4030, 4040, 4110, 4120, 4130, 4140, 4190, 4330, 4340, 4400, 4410, 4500 Indust/Const, 5000, 501 Series, 5190, 5340, 5500 Indust/Const, 6000, 601 Series, 7000, 701 Series, 801 Series. Replaces C5NE9E527A, D0NN9E527A, E1ADDN993149B, 81825598, DDN993149B. (Item #: 164077, Ref: D0NN9E527A) $30.10

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM part number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $14.00

Manifold Heater - This Thermostart Intake Manifold Heater is used on multiple Ford Diesel Tractors. It replaces original part numbers C5NE9A436A, E1NN9A436AA and 81806046. For Diesel Tractor Models 2000, 2110 LCG, 230A, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 340A, 3500, 3550, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 420, 4400, 445, 4500, 4600, 4610, 5000, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 5500, 555, 5550, 5600, 5610, 5900, 655, 6600, 6610, 6700, 6710, 7000 and 7600. (Item #: 118792, Ref: 3583543M2) $11.50

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models made 1954-1965 4 cylinder: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4031, 4110, 4120, 4121, 4131, 4140. (Item #: 179751, Ref: C3NN9D532A) $6.50

Pre-cleaner Assembly - For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 3910H, 4000, 4110, 4600, 4610, 4610H, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 5900, 6600, 6700, 6810. Pre-cleaner Assembly. 6.89 inch bowl diameter, 2.362 inch inlet diameter, 3.937 inch body height. (Item #: 112377, Ref: 81823388) $39.60

Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1801, 2000, 231, 2600, 3000, 335, 3600, 4000, 4600, 5000, 515, 531, 532, 6000, 801, 901 Replaces B9NN9A660A, 86555327, B9NN9A667A, and C0NN9A660A. (Item #: 186846, Ref: 101579AS) $85.65

Pre-Cleaner Assembly - 2" Inlet Pipe - For Ford tractor models 501, 600, 700, 800, 1800, 2000, 2110, 2120, 2130, 2300, 2310, 2600, 3000, 3055, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 4000, 4030, 4110, 4120, 4130, 4190, 4330, 4340, 4400, 4410, 4500, 4600, 5000, 5190, 5340, 5600, 6600, 6700, Compatible with Ford Construction and industrial models 231, 233, 333, 335, 340, 420, 445, 531, 532, 535, 540, 545, 2030, 3550, 4040, 4140, Replaces Ford OEM number 86555327, B9NN9A660A, Pre-Cleaner Assembly For 2" Inlet Pipe, Small Bowl [7"], Color may vary, (Item #: 112376) $29.60

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $85.65

Sediment Bowl Assembly - Sediment Bowl has a 7/16 inch bolt hole and 5/16 inch fuel line. For tractor models 801, 901, 4000 (1960 to 1964), 6000, 1801 Series. (Item #: 189627, Ref: C0NN9155A) $18.10

Sediment Bowl Gasket - 1-9/16 inch outside diameter. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to serial number 126524), 801, 901, 1801. (Item #: 111271, Ref: 311275) $2.10

$Ford 4000 Sediment Bowl Retaining Bolt 7\16 Dia.$
Sediment Bowl Retaining Bolt 7/16 Dia. - Banjo Bolt. Length is 1 1/2 with 7/16-20NF threads. Fits 4000 4 cylinder, 801, 901, 1801 (1960 to 1964 with 172 cubic inch gas engine serial number 126525 and up), and 6000. If you need a gasket for this bolt, order 2 of part number NCA99180A. (Item #: 126816, Ref: C0NN9A349B) $16.90

Single Fuel Filter - Single filter. Filter height is 2 7/8 inch. Fits the following Diesel tractors: 1965 and newer: 2000, 3000, 4000, 5000, 7000, 8000, 9000. INDUSTRIALS 1973 and newer: 650, 750, 7500. Replaces EDPN9N074AA. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20

Thottle Control to Bellcrank Rod - This Throttle Control to Bellcrank Rod is used on non-diesel fords, 1953 to 1964 and is 4 1/4 inches overall length. It replaces original part number NAA9815C. (Item #: 183034, Ref: NAA9815C) $11.60

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Item #: 178048, Ref: NAA99778B) $14.70

Throttle Body To Bowl Gasket - For Ford tractor models 800, 900, 4000 (1958 - 1964), Replaces Ford OEM number EAF9516B, C3NN9156B, (Item #: 111269) $1.12

Throttle Body To Bowl Gasket - For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 4000, Replaces Ford OEM number EAF9519A and C3NN9516A, (Item #: 111270) $1.00

Throttle Control Rod - 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2111, 2120, 2030, 2130, 4000, 4030, 4040, 4121, 4130, 4140 1953 thru 1964 gas only. Replaces C0NN9A790A. (Item #: 179893, Ref: NAA9815F) $25.30

Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cylinder, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-Cylinder Gas 1953 thru 1964. Replaces 86552618. (Item #: 153500, Ref: EAF9818C) $16.00

Throttle Control to Governor Rod - This Throttle Control to Governor Rod is used on Ford tractors models 600, 601, 700, 701, 501, 800, 801, 900, 901, 2000, 4000 and 1801, 1955-1965. It replaces original part number NCA99817A (Item #: 183037, Ref: NCA99817A) $18.20

Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Item #: 167626, Ref: C5NN9740A) $8.20

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Throttle Shaft - For Ford tractor models 2000, 2110, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3300, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 4400, 4500, 4600, 4610, Compatible with Ford Construction and industrial models 230A, 231, 335, 340, 420, 445, 515, 530, 531, 535, 545, 550, Replaces Ford OEM number C5NE9581A, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA, R3210, R3656A, R3657, R3658, R4111, R4111A, R4119, R4119A, R4120, R4120-1, R6852, R6853, R7867, R7896, R8552, R8553, R8554, (Item #: 126749) $31.30

Gauges

Fuel Gauge, 12 Volt - This fuel gauge is for tractor models 601, 701, 801, 901, 2000, 4000, all 1958-1964. (Item #: 100611, Ref: 310949) $31.07

Fuel Gauge, 6 Volt - This Fuel Gauge is for tractor models 601, 701, 801, 901, 2000, 4000, all 1958-1964. (Item #: 100610, Ref: 310948) $33.00

Fuel Sending Unit - Gas or Diesel, 6 or 12 volt, 1958-1964. For tractor models 801, 901, 4000. Uses Gasket B9NN9276A, sold separately. Also replaces 310941. (Item #: 108020, Ref: 310940) $27.50

Fuel Sending Unit - Lock Ring type for models: (2000, 2600, 3000, 3600, 4000, 4100, 4600, 2610, 3610, 2910, 4110, 4610 all 1965 - 11/1983). Fits Fuel Tank part number E2NN9002BA and C5NN9002AC. Lock Ring and seal are not included, part number C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal ORDER SEPARATELY. Replaces C5NN9A316B, D5NN9A316D, D6NN9A316A, D8NN9A316EA, D8NN9A316EB, D8NN9A316FA, D8NN9A316FB, D8NN9A316KA, 81805896, 83904240, 83909430, 83914077, 83914078, 83917492, 83917698 (Item #: 113915, Ref: D8NN9A316KA) $40.00

Fuel Sending Unit Gasket - This gasket is used with 310938 Fuel Sending Unit. (Item #: 178195, Ref: B9NN9276A) $7.50

Fuel Sending Unit Lock Ring Seal - This Fuel Sending Unit Lock Ring Seal is used with C5NN9N283A Lock Ring and on tanks E2NN9002BA, C5NN9002AC and D8NN9002HA. Replaces original part number E2NN9276AA (Item #: 178193, Ref: E2NN9276AA) $3.80

Gauge and Instrument Kit, 12 Volt - For 4 speed transmissions. transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120583, Ref: S.67651) $188.00

Gauge and Instrument Kit, 12 Volt - This gauge and instrument kit is for 5 speed transmissions with either gas or diesel engines. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120585, Ref: S.67653) $190.00

Gauge and Instrument Kit, 12 Volt - For select-o-speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120587, Ref: S.67655) $190.21

Gauge and Instrument Kit, 6 Volt - Six Volt Gauge Kit for 4 Speed Transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120582, Ref: S.67650) $182.77

Gauge and Instrument Kit, 6 Volt - For 5 Speed Transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120584, Ref: S.67652) $179.00

Gauge and Instrument Kit, 6 Volt - For Select-O-Speed Transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Item #: 120586, Ref: S.67654) $174.74

Instrument Cluster - Instrument Cluster Assembly with Voltage Stabilizer. Rotates clockwise. For use with generator or when converted to an aftermarket alternator. Does not come with mounting seal (available as part number C5NN10A949C). For 2000 series 3 cyl, 3000, 4000 series 3 cyl, 5000, 7000. Replaces C5NN10849L, EHPN10849A, 81816896, 81818095, C5NN10849M, C7NN10849C, C7NN6051R, 83958741, C7NN10A883A, EHPN10849AGV (Item #: 103889, Ref: EHPN10849A) $98.00

Instrument Cluster Seal - Instrument Cluster Gauge Gasket for 2000, 2600, 3000, 3600, 3400, 3500, 4400, 4600, 4000, 4610, 5600, 6600, 7600. Note, this seal does not have inset fasteners. That version of the seal is not available. (Item #: 127448, Ref: C5NN10A949C) $14.40

Instrument Panel Light - 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Includes bulb, light fixture and wire leads. (Item #: 125669, Ref: S.66854) $24.20

Oil Pressure Gauge - For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Item #: 113472, Ref: S.61171) $17.10

Oil Pressure Gauge, 80 pound - For the following tractors (before 1965): 600, 601, 700, 701, 800, 801, 2000, 4000, NAA. Oil pressure gauge, 80 pound, 2 inch body diameter. (Item #: 110411, Ref: FAD9273A) $14.50

Oil Pressure Gauge, 80 Pound, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Item #: 121629, Ref: FAD9273A_Black) $11.60

Oil Pressure Gauge Black Bezel - For Ford tractor models NAA, 2N, 8N, 9N, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140, Replaces Ford OEM number FAD9273A, Raised Black Bezel, Black Face, Dash Mounted, 1/8" Male Pipe Threads, 0 - 80 PSI, Oil Pressure Gauge - Chrome Bezel use Item #: 110411, (Item #: 121629) $11.60

Proofmeter Drive Adapter Shaft - For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Item #: 113716, Ref: EAF17375D) $21.10

Proofmeter Drive Bolt - This Drive Bolt fits the following models with Vane and Piston Type Hydraulic Pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Item #: 113717, Ref: EAF951A) $13.20

Proofmeter, Select-O-Speed - For tractor models 2000, 4000, 601, 61, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 with Select-O-Speed. (Item #: 110412, Ref: C3NN17360J) $24.80

Sending Unit Lock Ring - For various fuel tanks such as E2NN9002BA, C5NN9002AC and D8NN9002HA which use a lock ring to secure the fuel sender (like the D8NN9A316KA). Fits many Ford Models, 1965 and later. Order Seal E2NN9276AA separately if needed. Replaces C5NN9N283A, 81811218. (Item #: 152001, Ref: C5NN9N283A) $5.00

Sending Unit Lock Ring - For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4131, 4140, 6000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number FEG99275A, Outside Diameter: 2.682", Inside Diameter: 1.895", (Item #: 164834) $13.60

Tach Drive - Generator Tach Drive Assembly. For all C7NN10000C Generators on 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Item #: 119851, Ref: C5NF17B282B) $16.10

Tach Drive - Tachometer drive assembly used on a Tisco alternator conversion kit part number 6X10300ALTH. For 2000, 3000, 4000, 5000, 6000, 7000. (Item #: 113771, Ref: 6X10299TD) $26.51

Tach Drive Gear - For tractor models 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Item #: 119850, Ref: C5NF17373B) $11.10

Tachometer - Tachometer with an original style needle. The housing outside diameter measures 3.320 inches. For the following models with a gas, LP, or Diesel engine and 5 speed transmission made 1955 thru 1964: 650, 651, 660, 661, 850, 851, 860, 861, 950, 951, 960, 961, 2000, 4000. Replaces 11072704 and 84220735. (Item #: 121651, Ref: C3NN17360K-OE) $37.00

Tachometer Cable - Cable Assembly, Tachometer Drive, 39 inches long. For 2000 and 4000 Diesel, 1965-1975. For 3000 Gas and Diesel 3/1967-1975. (Item #: 111908, Ref: C7NN17365A) $10.90

Tachometer Cable - This Tachometer Cable measures 48 inches long and fits the following tractor models without a cab: 2000 (3 cylinder), 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000 (3 cylinder), 4100, 4110, 4400, 4500, 4600SU (from 1975-1981), 4610 (from 1981 and up), 5000, 5100, 5600, 5610, 6600, 6610, 7000, 7600, and 7610. Replaces: 506332M91, D9NN17365AA, D9NN17365AB, G45230, 150938R91, 363811R92, TO19144, 363811R92, 82847520, and D3NN17365F. (Item #: 111009, Ref: D3NN17365C) $10.80

Tachometer Cable - Ford Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 158307, Ref: B9NN17365B) $12.40

Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 102193, Ref: B9NN17365BSTEEL) $14.90

Tachometer (Proofmeter) - This proofmeter is used on Ford tractors 1953-1964 with 4-Cylinder Engines and 4-Speed Transmissions (1953-1964). Replaces C3NN17360N. (Item #: 100613, Ref: C3NN17360N) $29.80

Tachometer (Proofmeter) - For tractor series: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All with 4-Cylinder Engine and 5-Speed Transmissions (1955-1964). (Item #: 100614, Ref: C3NN17360K) $25.00

Tachometer (Proofmeter) Gauge - 4 Speed with OEM Style Needle - For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 941, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number C3NN17360N, 4 Speed Transmission, OEM style needle, For 5 speed gauge use Item #: 121651, (Item #: 121650) $42.00

Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch diameter, 34 inch capillary tube length. Replaces FAD10883A. NOTE, the probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Item #: 103887, Ref: C3NN18287A-Blac) $17.10

Temperature Gauge, Chrome Rim - For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch face diameter. Approximately 41-1/2 inches capillary lead length, 5/8 inch x 18 UNF fitting with 1/2 inch NPT pipe bushing. Replaces FAD10883A, and C3NN18287A. NOTE: The probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Item #: 178051, Ref: C3NN18287A-Chro) $29.20

Temperature Sender, Water - This sending unit is a 1/8 NPT thread. If you r tractor has a 3/8 NPT thread for this to go into, you need to purchase an adapter at your local hardware store. Fits 2000, 2600, 3000, 4000, 5000, 7000, (1965-1975). Replaces C4AH10884A, 81784007, 81784077 (Item #: 128528, Ref: C4AH10884A) $7.50

Warning Light - Warning Light serves as a Select-O-Speed Transmission Oil Temperature Warning Light or as a Torque Converter Transmission Oil Temperature Warning Light, or as a Generator Warning Light. For the following models: 2000, 4000, 501, 601, 701, 801, 901, 1811, 1881, 2100, 2110, 2111, 2120, 3000, 4100. 0.875 inches outside diameter, 3/4 inches - 20 NF thread, 0.885 inches tall. Bulb and Socket not included. (Item #: 125343, Ref: B9NN10241B) $17.20

Hitch / Drawbar

Bracket Left Hand - Bracket, Left Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND932B (Item #: 119989, Ref: C7NND932B) $31.00

Bracket Right Hand - Bracket, Right Hand Stabilizer. For 250C, 260C, 2810, 2910, 3230, 335, 3430, 345, 345D, 3550, 3900, 3910, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 420, 4400, 445, 4500, 4600, 4610, 4630, 4630N, 4830, 4830N, 5030, 515, 532, 535, 7630. Replaces C7NND933B (Item #: 119988, Ref: C7NND933B) $30.80

Bushing, Lower Lift Link - Bushing, Lower Lift Link OD .995 inch ID .750 inch. (Item #: D0NNA865A) $16.10

Bushing, Lower Lift Link - For Ford tractor models 2810, 2910, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4610SU, Compatible with Ford Construction and industrial models 3550, 4500, Replaces Ford OEM number D0NNA865A, (Item #: 169487) $15.90

Castle Nut - This is a 1 inch UNF Thread Castle Nut. It is used with E4NNF537AA Lower Link Pin and other applications where a 1 inch UNF thread Castle Nut is needed. It replaces 390767S36, 83958917, 14H920 (Item #: 158239, Ref: 390767S36) $4.30

No
Picture
Chain Strap - For Ford tractor models 2810, 2910, 3055, 3900, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 3550, 4500, Replaces Ford OEM number C5NNN916B, Right Hand, (Item #: 176420) $16.90

No
Picture
Check Chain Eyelet - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 2000, 2031, 2100, 2110, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 3000, 3500, 3600, 3610, 4000, 4031, 4110, 4120, 4131, 4600SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 531, Replaces Ford OEM number C5NN667A, Right Hand, For Left Hand Check Chain Eyelet use Item #: 176412, (Item #: 176411) $13.40

No
Picture
Check Chain Eyelet - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 2000, 2031, 2100, 2110, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 3000, 3500, 3600, 3610, 4000, 4031, 4110, 4120, 4131, 4600SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 531, Replaces Ford OEM number C5NN678A, Left Hand, For Right Hand Check Chain Eyelet use Item #: 176411, (Item #: 176412) $14.20

No
Picture
Check Chain Eyelet - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600SU, Compatible with Ford Construction and industrial models 3500, Replaces Ford OEM number C5NNA948A, Left Hand, (Item #: 176418) $16.00

No
Picture
Coupler - Quick coupler, female half. For 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 119149, Ref: 4250-4) $25.10

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Drawbar - With 2.750 inch offset. 34.625 inches long, 2.00 inches wide, 1.250 inches high, .937 inch diameter, front holes at 1.343 inches, 3.343 inches, 5.718 inches and 7.718 inches from front. For tractor models 3900, 4000 with 540/1000 PTO 1965->, 4600. (Item #: 168568, Ref: C5NN805F) $141.00

Drawbar Clevis Spring Pin - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3150, 3230, 3300, 3310, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4031, 4120, 4130, 4131, 4200, 4330, 4340, 4400, 4410, 4500, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 4140, Compatible with Ford Baler (s) 530, Replaces Ford OEM number 311920, 81813066, (Item #: 115372) $0.98

Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Item #: 186635, Ref: 957E5967) $21.60

Drawbar Pin - For Ford tractor models 2000 (with swinging drawbar), 2600, 2610, 2810, 2910, 3000 (with swinging drawbar), 3100, 3230 (7/90-later), 3430 (7/90-later), 3600, 3610, 3900, 3910, 3930 (7/90-later), 4000, 4100, 4110 (with swinging drawbar), 4130 (7/90-later), 4600, 4610, 4830 (7/90-later), 5030 (9/92-later), Compatible with Ford Construction and industrial models 515, 532, Replaces Ford OEM number E4NN807AA, C5NN807D, CBPN804A, Front pin, Spring pin/clip sold separately., For Sping Pin Clip use Item #: 115372, (Item #: 115371) $9.10

No
Picture
Drawbar, Two Piece, with Clevis Strap - For Ford tractor models 2810, 2910, 3230 (7/90 - later), 3430 (7/90 - later), 3910, 3930 (7/90 - later), 4000 (with 540 RPM PTO), 4100, 4110, 4130 (7/90 - later), 4600, 4610 (all with clevis), 4630 (7/90 - later), 4830 (7/90 - later), 5030 (9/92-later), Replaces Ford OEM number 82009362, C5NN805J, DJPN825A, Width: 2", Thickness: 1.25", Length: 32.5", 2.75" Drop, Two .922" front holes (1.375" and 5.75" from front", Includes Clevis Strap and hardware, For One Piece Drawbar use Item #: 168183, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115370) $109.00

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Item #: 111911, Ref: EC0N660A) $5.20

Fork - Fork for leveling box. Length 20 inches. For 3055, 3550, 4000. (Item #: 125360, Ref: C5NN585B) $20.98

Hanger - Drawbar Hanger. For 800, 801, 4000 4 Cylinder. 9.75 inches tall. (Item #: 173155, Ref: NDA809A) $40.00

$Ford 4000 Hanger \ Bracket$
Hanger / Bracket - For Ford tractor models 800, 801, 4000, Replaces Ford OEM number NDA809A, Height: 11", (Item #: 184160) $55.00

Hydraulic Spring Housing - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 345, 345D, 420, 445, 445D, 450, 535, 540, 545, 545D, 3500, 3550, 4500, Replaces Ford OEM number C5NNN905B, (Item #: 155018) $43.98

Level Box Handle - Lever Handle. For Jubilee, NAA, 2N, 8N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. (Item #: 172986, Ref: 9N594) $9.10

Leveling Arm - Right hand leveling arm assembly. Adjustment is 20.250 inches to 25.250 inches center hole to center hole. Replaces NCA577NCA. (Item #: 110402, Ref: 6N577A) $70.00

Leveling Arm - Rod and Yoke, Left Hand. 5/8 inch hole, 13-3/8 inches long, 3/4 inch coarse thread. All purpose with Cat I. Replaces C5NNN673A. For tractor models 4000 (1965-1975). (Item #: 153765, Ref: E4NNN673AA) $24.26

Leveling Arm Assembly - Right Hand Leveling Arm Assembly 27 1/4 to 32 1/4 inches pin to pin. Uses a 5/8 inch top pin and 3/4 inch bottom pin. For 3550, 4000, 4400, 4500, 4600 (Item #: 113626, Ref: C5NN569AM) $74.00

Leveling Box Assembly Less Fork - For Ford tractor models NAA, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, Replaces Ford OEM number 8N577A, 180854M91, Without fork, For 14-3/4" Fork use Item #: 108897, (Item #: 107886) $66.00

Leveling Box Assembly, Right Hand - Right Hand Leveling Box Assembly with Fork. Adjusts 23 inches to 27 inches center hole to center hole. For Ford tractors: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000 (Except Row Crop). INDUSTRIALS: 3550, 420. Replaces NCA577A. (Item #: 179006, Ref: HLBMF62) $107.00

Leveling Box Fork - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 3000, 3120, 3300, 3310, 3400, 3500, 3600, 4000, 4110, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 530A, 531, Replaces Ford OEM number C5NN585C, 3/4" thread, 15" Long, (Item #: 113623) $41.60

Leveling Box Gear - Gear, Leveling Box Pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. (Item #: 129284, Ref: B9NN568A) $9.60

Leveling Box Knuckle Pin - MUST ORDER IN QUANTITY 2, PRICED EACH. For tractor models NAA, 600, 601, 700, 701, 800, 801, 801, 701, 801, 900, 901, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 inch pin diameter, 2 7/8 inch usable length. Takes our 3/16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Item #: 111799, Ref: 9N595) $2.80

Leveling Box Knuckle, Right - Knuckle, Right Hand Leveling Assembly. Pin holes are 5/8 of an inch. The shape of the one pictured may vary slightly from different manufacturers. For tractor models NAA, Jubilee, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600. Uses 2 pins part number 9N595. (Item #: 165379, Ref: 957E566) $10.20

Leveling Box Shaft - This Leveling Box Shaft and Gear measures 14 inches long with thread length of 4 inches. Diameter is 3/4 inches. For Jubilee, NAA, Dexta, Super Dexta, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000. (Item #: 113926, Ref: NCA579B) $15.10

Leveling Box Yoke Rod, LH - Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. (Item #: 115632, Ref: C5NNB863A) $21.60

Leveling Rod Assembly, Left Hand - Left Hand Leveling Arm Assembly. Fits models: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 4000. Includes: C5NNB863A rod, NCA585B fork, and 957E566 knuckle. Adjusts from 21 1/2 inches to 24 1/2 inches. Replaces NCA564B, C5NN564D. (Item #: 118481, Ref: 6N564B) $68.00

Lift Arm Ball Retainer Clip - For Ford tractor models Dexta, Major, 3000, 4000, 5000, Replaces Ford OEM number C5NNN557B, 81814226, Spring type clip for dual category lift arm balls, Sold Individually, (Item #: 107805) $3.50

Lift Arm - RH - For Ford tractor models 2310, 2600, 3000, 3055, 3100, 3600, 3610, 3900, 4000, 4600, 4600SU, Replaces Ford OEM number C5NN555AF, Right hand, Tractor end: Category 1, Implement end: Category 1, Length: 33" center to center, For Cat 1/2 use Item #: 122628, (Item #: 169971) $86.58

Lift Link Pin Lower - Used on Ford models: 4340, 5030, 3910, 4000, 3055, 4630, 5000, 3930, 4330, 4130, 4830, 4200, 2810, 4600, 4100, 3900, 2910, 3550, 4410, 3230, 4110, 4500, 4610. This pin measures 5.880 inches long with 1 inch x 12 Thread. Replaces E0NN563CB (Item #: 170280) $38.98

Lower Lift Arm, Cat II - Left or right hand, 34.646 inch center hole to center hole, 3.504 inch wide, .709 inch thick, Rigid Forged Type Ends. For tractor models 250C, 260C, 2810, 2910, 3000, 3055, 3230, 3430, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 445D, 4500, 4600, 4610, 4630, 4830, 5030, 515, 532, 535, 545D. Color varies. Replaces 82002004, C5NN555AL, C7NN555S. (Item #: 122629, Ref: 81821330) $124.00

Lower Lift Arm, LH - Left hand Category I lift arm has 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, (1955-1964); 2000, 2600, 3000, 3600 (1965-1981), 4000. Replaces D0NN555C (Item #: 111312, Ref: D0NN555CLH) $56.00

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.80

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

$Ford 4000 Lower Lift Arm R\H (Cat 1\1)$
Lower Lift Arm R/H (Cat 1/1) - Lower Link Lift Arm R/H (Cat 1/1) measures 32 7/8 inches in length, 3 9/16 in width, and 5/8 in thickness. Applicable for 20 0-4000 (4 cyl) 2000, 2100, 2110, 2120, 2150, 230, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3100, 3120, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3600N, 3600V, 3610, 3610N, 3910, 3910N, 4000, 4110, 4110N, 4140, 4600, 4610, 4610N, 530, 531, 600, 601, 700, 701, 800, 801, 900, 901. Replaces 81815827 and E5NN555AA11Z. (Item #: 191080, Ref: C5NN555AN) $44.98

No
Picture
Lower Lift Link Pin - For tractor models (2000, 4000 4 cylinder), 800, 820, 840, 850, 900 950, 960 1/1955 and up. (Item #: 172657, Ref: NCB563A) $33.70

Lower Lift Link Pin - Replaces original part number 83949240, E4NNF537AA. It uses 390767S36, 1 inch UNF Thread Castle Nut, not included. (Item #: 170281, Ref: E4NNF537AA) $30.00

Lower Lift Link Pin - Used on Ford Ford tractor models: 2810, 4600, 4600SU, 4100, 4330, 4200, 4110, 4340, 3910, 4000, 3055, 4500, 4610, 3600, 3900, 2910, 3550, 4410, 3610. Replaces 83976439, C9NN563A, D0NN563D. Length: 5.970 inches, Thread: .750 inches. (Item #: 168613) $44.40

$Ford 4000 Lower Link Lift Arm (CAT 1\2)$
Lower Link Lift Arm (CAT 1/2) - Ford Lower Lift Arm R/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401. (Item #: 122628, Ref: E5NN555AA) $112.00

$Ford 4000 Lower Link Lift Arm L\H (CAT 1\2)$
Lower Link Lift Arm L/H (CAT 1/2) - Ford Lower Lift Arm L/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402. (Item #: 122627, Ref: E5NN556AA) $113.00

$Ford 4000 Lower Link Support Pin, 5 1\8 Inches$
Lower Link Support Pin, 5 1/8 Inches - This Lower Link Support Pin measures 5 1/8 inches long. It is for tractors less Differential Lock for models 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA. Replaces NCA563C, 81801640, 87712982 (Item #: 154027, Ref: NCA563C) $18.10

Pin Clip Kit - Kit, Pin (C5NN807D) and Spring Clip (311920). Tractors 2000, 3000, 4000 (1965 and up). Also services earlier models (1953 to 1964) using swinging drawbar: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. This pin is 7/8 inch in diameter and 2-3/4 inches long. Replaces 311920, C5NN807D, CBPN804A, E4NN807AA, 83948134. (Item #: 187117, Ref: CBPN804A) $7.10

Pin, Leveling Fork - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 531, 3500, Replaces Ford OEM number C5NN595B, (Item #: 169490) $10.30

Pin, Lift Link, Lower - For Ford tractor models 2810, 2910, 3000, 3055, 3230, 3430, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 420, 515, 532, 535, 3550, 4400, 4500, Replaces Ford OEM number C0NNC893A, 81812094, 3/4" x 2-1/2", (Item #: 170308) $21.50

Rod Leveling - Leveling Rod Assembly, left hand, adjustment from 27-1/2 inches to 32 inches. For 230A, 2310, 231, 233, 2600, 2610, 3000, 333, 334, 335, 3600, 3610, 4000, 4600SU, 4610, 530A. (Item #: 115658, Ref: E0NNB484DA) $76.00

Shaft Level Box - Shaft with Pinion Gear. Length 12 inches. For tractor models 4000, 4600. (Item #: 123370, Ref: C5NN579E) $14.30

Stabilizer Arm - Stabilizer arm measures length 31-1/2 inches center to center. For tractor models 2N, 600, 800, 8N, 9N, Jubilee, NAA, 2000 (4 cylinder), some 4000 (4 cylinder). Color of part can be red or primer depending on supply. (Item #: 110516, Ref: 230042R) $15.30

No
Picture
Stabilizer Arm - For Ford tractor models 4000 (1965-later), 5000, 32.625" Long, .375" Thick, 2.000" Wide, 30.750" Outside center to center, 26.187" Inside center to center, 1.00" Outer hole diameter, .875" Inside hole diameter, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115138) $25.10

Stabilizer Arm Blue - Arm only, blue. 31.50 inches center to center on holes. 7/8 inch pin holes. Replaces 230042 (Item #: 180774, Ref: 230042B) $20.10

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Item #: 111709, Ref: 231254) $13.00

Stabilizer Chain Assembly - For Ford tractor models 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5700, 6600, 6700, 7000, 7600, 7700, Replaces Ford OEM number CFPND936A, 81813318, 81813585, CFPND936D, Adjustment Length: 3", Closed Length: 24", (Item #: 152139) $41.35

Stabilizer Pin - For Ford tractor models 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3430, 3500, 3910, 3930, 4000, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 340, 340A, 340B, 445, 515, 532, 540, 545, Replaces Ford OEM number C5NNN873B, 81813606, (Item #: 166191) $6.70

Stabilizer Pin - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3910, 4000, 4000SU, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Replaces Ford OEM number C5NNN873A, 81802085, Pin Diameter: 7/8", Working Length: 1/2", Thread Length: 1-3/16", (Item #: 168888) $8.40

No
Picture
Stabilizer Pin - For Ford tractor models Major, Power Major, Super Major, 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5610S, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7810, 7810S, 7910, 8210, Replaces Ford OEM number 355278S36, 81824450, 5/8" x 2 3/8", (Item #: 173864) $5.00

Swinging Drawbar - For 600, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5/8 inches diameter and located 1-1/2 and 4-3/8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5/8, 3-5/8 and 7-5/8 inches on center from the end. Used in 49A34R and 49A35. Replaces C0NN805F. (Item #: 109566, Ref: C0NN805F) $40.00

Swinging Drawbar Clevis Assembly - Clevis Assembly with Pins for SDA6 or SDA8 kits. For tractor models 8N, NAA, NAB, 600, 601, 800, 801, 1801, 2000 4 cylinder, 4000 4 cylinder. (Item #: 178030, Ref: NCA803B) $40.00

Swinging Drawbar Kit - Swinging Drawbar Kit - Fits: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, (and 4 cylinder 4000 except Rowcrop). Contains: drawbar, hanger, clevis and pin. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. (Item #: 150688, Ref: FDS302) $155.00

Thrust Bearing - Leveling Box Assembly Bearing. For 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600, Dexta, Super Dexta, Jubilee, NAA. (Item #: 179766, Ref: 9N554) $7.90

Top Link - Top Link, Cat II both ends, adjusts 24.500 inches to 31.250 inches. 1 inch pins both ends. Replaces C0NN590A, 81824138, 81802111, E0NN576BB, D0NN576A. (Item #: 102055, Ref: D0NN576A) $56.00

Top Link Assembly - Top Link Assembly, CAT I and II. Pin holes are 3/4 inch on one end, 1 inch on the other. Verify required length before ordering. This Top Link adjusts from 24 1/2 inches to 34 1/2 inches. (Item #: 102054, Ref: D0NN576B) $79.00

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Item #: 126752, Ref: NCA535A) $59.00

Turnbuckle - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3430, 3600, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5010, 5030, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Compatible with Ford Construction and industrial models 3500, Replaces Ford OEM number E1NNR837AA, 82005860, 83933118, (Item #: 155031) $13.40

Hydraulic System

Back Pressure Valve - This valve was used on FORD 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 2610, 2910, 3610, 2910, 4610, 5610, 6610, 7610, 7710. (Item #: 183933, Ref: C9NN960A) $35.20

Back Up Ring - Ring, Back-Up, for Lift Cylinder Piston. For model 4000. Price shown is for each, sold only in multiples of 2 items. (Item #: 172885, Ref: D1NN473A) $9.70

No
Picture
Body Half Female - Coupler For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 120882, Ref: 8250-4) $55.00

Breakaway Clamp, Double - Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 112480, Ref: 5006-4) $29.95

Clamp - Double Break-Away Clamp. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 5900, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 178602, Ref: 9006-4) $42.00

Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 and Safeway type S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this clamp. Used on tractors with Single Pump Hydraulic System, 1955 thru 1981 models. For tractor models 500, 600, 700, 800, 900, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 112480, Ref: S42-4) $29.95

Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7/16 inches in diameter, smooth type, 2-3/4 inch spacing. 1-3/8 inch relief diameter, 9/16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Item #: 112100, Ref: 290421) $43.00

No
Picture
Cylinder Packing Kit - Seal, Packing For 750 loader. (Item #: 182755, Ref: 309940) $97.00

Cylinder, Side Link - Side Link Hydraulic Cylinder. (Item #: 178907, Ref: HSL3201) $335.00

Cylinder, Top Link - Top Link Hydraulic Cylinder. (Item #: 167107, Ref: HTL3101) $344.00

Cylinder without Valve - Hydraulic Cylinder without Unload Valve and without piston is a 3 inch bore. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. (Item #: 179993, Ref: C5NN477BLV) $305.00

Cylinder with Unload Valve - This Hydraulic Cylinder with Unload Valve and With Piston is a 3 inch bore. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, Dexta, Super Dexta. MAY OR MAY NOT COME PAINTED. (Item #: 180175, Ref: C5NN477B) $691.00

Double Spool Remote Valve Kit - This Double Spool Double Acting Hydraulic Remote Valve Kit includes valve, levers, o-rings and hoses. Depending on application, hoses may need an extra fitting to lengthen. Hose bracket and female couplers. Non detent, spring centering. Mounts on the lift cover (under the seat). Some seat brackets may have to be modified for clearance. Use with 8010-4 male plugs for the couplers (not included). Will not fit compact tractors. Will NOT fit NAA, Jubilee, Golden Jubilee (bolt pattern is different). 3/8 inch BSP threaded hoses. Replaces 309973, 309973F, 309996, 80309973, 83928704, 83944762, C9NNB950B, E1NNB950BA, E1NNB950BB (Item #: 168679, Ref: E1NNB950BB) $620.00

Draft Control Bushing - This Draft Control Bushing is used on Fordson Dexta, Super Dexta and on Ford Models 1965-1975. It replace original part numbers 957E691, 81801765 (Item #: 167945, Ref: 957E691) $15.40

Draft Control Link Assembly - This Draft Control Link Assembly is used on Fordson Dexta, Super Dexta and on Ford Models 1965-1975. It replace original part numbers; link C5NN540A, 81801586, Spring 957E539, 81801585 and Bushing 957E691, 81801765 (Item #: 155011, Ref: C5NN540A) $65.00

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Item #: 111890, Ref: 8N541B) $40.00

Draft Control Plunger - This Draft Control Plunger is for models 2000, 2110LCG, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D. (Item #: 158406, Ref: C5NN541A) $31.40

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Item #: 165989, Ref: 9N547B) $37.00

Draft Control Spring - This Draft Control Spring is used on Fordson Dexta, Super Dexta and on Ford Models 1965-1975. It replace original part numbers 957E539, 81801585 (Item #: 179292, Ref: 957E539) $6.00

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Item #: 178070, Ref: 9N527) $16.30

Draft Control Spring Plate, with Pin - This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Item #: 178077, Ref: 8N527) $19.10

Draft Control Spring Seat - Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Item #: 178127, Ref: 2N624) $9.30

Draft Control Yoke - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 334, 335, 340, 340A, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, Replaces Ford OEM number C5NN546C, C5NNN980A, 81802238, 81815672, Draft Control Yoke, (Item #: 170556) $30.30

Drive Gear Shroud, Hydraulic Pump - For tractor models (3000, 340, 3900, 4000, 4100, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 4500, 4600, 460NO, 4600SU, 515, 532, 540, 545 all with independant PTO). (Item #: 172659, Ref: C5NNN872A) $34.54

Dust Cover - Automatic dust covers. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 5900, 600, 6600, 700, 800, 900 (Item #: 172487, Ref: 9507-4-1H) $54.21

Friction Disc for Hydraulic Control Lever - Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Item #: 111446, Ref: C5NN518B) $1.80

Gasket, Hydraulic Pump Drain - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Hose Bracket - Hydraulic Hose Coupler Bracket. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5900, 500, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 179700, Ref: D6NND916D) $27.80

Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3/8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 111565, Ref: HV4902) $89.00

Hydraulic Cover Blocking Plate - Fits 2000, 3000, 3930, 4000, 4100, 4110, 4130, 2600, 3600, 3900, 4600, 4610, 4630, 4830, 5030 INDUSTRIALS: 230A, 231, 233, 234, 333, 334, 335, 530A, 540, 540A, 540B, 545, 545A, 545B, 545C, 545D. (Item #: 158711, Ref: C5NN475B) $42.40

Hydraulic Filter, Steel Mesh - Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3/4 inch tall, 2 1/8 inch Diameter with a 3/4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. YTO C5NNN832B (Item #: 113711, Ref: C5NNN832B) $10.70

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref: C5NNN901A) $9.30

Hydraulic hose Assembly - Hydraulic Hose with fittings is 26 inches in length. The straight end has 1/2 inch NPT and the 90 degree end has 9/16 inch ORB. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 179212, Ref: H31-SPL-26) $41.90

Hydraulic hose Assembly - Hose, 44 inch. For tractor models 4000, 5900. (Item #: 179696, Ref: H31-SPL-44) $42.90

No
Picture
Hydraulic hose Assembly - Hose, 44". (Item #: 179992, Ref: HV4977) $41.20

No
Picture
Hydraulic Hose Assembly - Hose, 18. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179990, Ref: HV4970) $33.50

No
Picture
Hydraulic Hose Assembly - Hose, 21. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179991, Ref: HV4971) $34.30

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $29.90

Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if piston has been changed to o-ring and back-up ring style. E11GF9 single groove gland seal is available separately. (Item #: 113538, Ref: LCRK5564) $7.00

Hydraulic Lift Cover Repair Kit - For tractors 2000, 2110LCG, 2600, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4110LCG, 4400, 4500. all 1965 and up, with 3 inch Lift Cylinder. Lift Cover Repair Gasket Kit. Replaces 83963584, 86900100, 87111S95, C0NNB999A, C5NN502A, D1NN473C, E7NN502AA, NCA473A (Item #: 173885, Ref: LCRK65UP) $10.90

No
Picture
Hydraulic Lift Cover Repair Kit - For Ford tractor model 4000 (1965-later), Replaces Ford OEM number VPK2205, E7NN502AA, CKPN485A, D1NN473A, C5NN533A, (Item #: 176568) $12.40

Hydraulic Lift Cylinder Piston - Piston ONLY. Back-up ring NCA473A and o-ring seal 87111S95 are NOT included. This lift cylinder piston is 3 inches in diameter. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 3000, 3600, 4000, Dexta, Super Dexta. Replaces C5NN530B. (Item #: 155015, Ref: C5NN530B) $27.30

Hydraulic Lift Cylinder Piston O-Ring - This o-ring is used with C5NN530B 3 inch piston. Fits Models: 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4110LCG, Dexta, Super Dexta. Replaces 87111S95, 381871R1, 81845041. (Item #: 173006, Ref: 87111S95) $0.90

Hydraulic Lift Cylinder Piston Washer - This Backing Washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Item #: 170949, Ref: NCA473A) $3.50

Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Item #: 178133, Ref: S.66598) $20.60

Hydraulic Lift Oil Level Dipstick - Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Item #: 126537, Ref: NCA927B) $20.60

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Item #: 155017, Ref: 86563314) $32.40

Hydraulic Lift Ram Arm - For 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All before 1965 and with 4 cylinder engines. (Item #: 161833, Ref: NCA545B) $80.00

Hydraulic Lift Rocker - For tractor models (3000 1/1965 and up), (3600, 4100 1/1975 and up), (3610 from 1/1981 to 12/1982), (4000 3 cyl. 1/1965 and up), (4610 1/1981 and up), 4610SU. (Item #: 154051, Ref: E2NN535BA) $124.00

Hydraulic Lift Rocker Bushing - Used on Ford models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 4000, 4110, 4140, 4600SU, 231, 233, 333, 334, 340, 340A, 340B, 445, 445A, 450, 531, 540, 540A, 540B, 545, 545A, 3500. This part has an OD of 1 inch, and ID of 3/4 inch and is 3.9 inches long. Replaces 81800791, 83937249, E66GF9, E1NNB681AA (Item #: 166271) $27.10

Hydraulic Lift Rocker Pin - This pin is used with C7NN535B, C7NN535C and E0NN535AA Top Link Rockers. The pin is number 4 in the image. Used on Ford 3500, 2000, 2100, 2110, 2120, 2150 1/70-12/74, U.K. Only, 330A, 2300, 231, 2310, 233, 2600, 2600N, 2600R, 2600V, 2610, 2610V, 3000, 333, 334, 335, 3600, 3600N, 3600R, 3600V, 3610V, 4000, 4110, 4600SU, 531 (Item #: 189212) $28.50

Hydraulic Lift Shaft - For tractor models (2000, 4000 from 1965 and up), (2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, (340A prior to 5/1983), 3500, 3600, 3910, 4110, 530A, 531. (Item #: 170950, Ref: C5NN544D) $155.00

Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Item #: 165431, Ref: NCA544B) $419.08

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Item #: 114032, Ref: 9N543B) $52.00

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $15.80

Hydraulic Pump - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. This item may take up to two weeks for delivery. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 126603, Ref: NAA600D) $900.00

Hydraulic Pump - For tractor models 4000, 4500, 535, 550. 13 Splined, 7/8 inch shaft. Verify OEM part number to ensure proper fit. 5-3/4 center to center bolt pattern. 4 inch flange. Uses flange mount for hoses. 4 Threaded holes either side of body at ports. Replaces D1NN600C. (Item #: 163305, Ref: D1NN600B) $792.44

Hydraulic Pump - For 3550, 4000 from 1965 with transmission mounted pump. Hydraulic Pump. D0NN600F, C7NN600E, C7NN600N, 81824183 (Item #: 104246, Ref: D0NN600F) $425.00

Hydraulic Pump - This is a Gear Type Pump. It will mount to the engine in the same location as a Piston Style Pump, but the hydraulic lines will have to be changed. For tractor models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3/1983, 5610, 6610, 6710, 7610, 7710 1981-9/1985, 7210, 8210 1982-10/1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. (3500, 3350, 4400, 4500, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4200, 4330, 4340, all 1965 to 9/1969 w/ Ind PTO). Uses E4NN911AA gasket, not included. Used with filter D6NNB486A with vertical exhaust or D8NNB486EA with horizontal exhaust. Hydraulic Pump also replaces 83996272, 83996336, E1NN600AA, E1NN600AB, E2NN600AB, C5NN600AA, D3NN600A, D3NN600H, D4NN600B, ESL11276, E1NN600AA-E, E1NN600AB, VPK1014, 81836735, 81844738, 83900640, 83928509, 83996272. YTO E1NN600AB (Item #: 155909) $375.51

Hydraulic Pump - This new Hydraulic Pump is a Piston Type. It uses push in and 15/16 inch screw in lines. It is used on 2000, 3000, 4000, 3400, 3500, 3550, 4500. It replaces original part number C7NN600Y. (Item #: 168851, Ref: C7NN600Y) $1129.01

Hydraulic Pump Compression Nut - Hydraulic Pump Compression Nut Fits Ford 1965 through 12-1974 with engine mounted, cast iron body hydraulic piston pump. Used on 1/2 inch pressure line. Two used per tractor. Sold individually. Replaces: 291320, 81821215, C7NNH856C (Item #: 178062, Ref: C7NNH856C) $12.70

Hydraulic Pump Cover and Pin - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4410, 6000, Compatible with Ford Construction and industrial models 3500, 3550, 4500, Replaces Ford OEM number C5NN893B, For 1/1965-9/1969 Flange Type Piston Hydraulic Pumps Only, (Item #: 113713) $90.00

Hydraulic Pump Cover and Pin - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 312059, NCA893A, For Piston Pump Only, (Item #: 113714) $104.00

Hydraulic Pump Drive Gear - For tractor models 4000, 5000, 7000. (Item #: 172739, Ref: C5NN866A) $57.00

Hydraulic Pump Drive Shaft - Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Item #: 111747, Ref: 195454) $39.00

No
Picture
Hydraulic Pump End Cover and Pin - For Ford tractor models 2000, 2600, 3000, 3600, 4000, 4600, Replaces Ford OEM number C7NN893C, (Item #: 180085) $104.00

Hydraulic Pump Gasket - This gasket is used to mount Engine Mounted Hydraulic Pumps on many Ford Tractors, including E1NN600AB Pump. Replaces original part numbers 83948101, E4NN911AA. (Item #: 162462, Ref: E4NN911AA) $2.00

Hydraulic Pump Gasket Kit - Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 182513, Ref: FPN910B) $31.50

Hydraulic Pump Gear - Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000 4 cylinder, 4000 4 cylinder, 600 Series, 601 Series, 700 Series, 701 Series, 800 Series, 801 Series, 900 Series, 901 Series. Replaces C0NN908A (Item #: 112072, Ref: C3NN908A) $36.10

Hydraulic Pump Mounting Gasket - On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vane type hydraulic pumps to the engine. (Item #: 167408, Ref: EAF911B) $1.20

Hydraulic Pump Mounting Gasket - For Transmission mounted pumps on Ford 3000, 3550, 4000, 4000SU, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500. (Item #: 182819, Ref: C5NN915C) $10.80

Hydraulic Pump Needle Bearing - Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Item #: 123075, Ref: NCA881A) $11.20

Hydraulic Pump Piston - Hydraulic pump piston with and diameter of 9/16. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models. Replaces 81801695 and C0NN882B. For models: 2000 3 cylinder, 2150, 2300, 2600, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 4000 3 cylinder, 4000SU, 4100, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU. (Item #: 184020, Ref: C5NN615A) $13.50

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5/8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Item #: 184993, Ref: NCA615C) $11.10

Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Item #: 170934, Ref: C0NN852A) $34.00

Hydraulic Pump, Remanufactured - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. The is a remanufactured version of NAA600D. Add $250.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. This item may take up to two weeks for delivery. (Item #: 205308, Ref: NAA600DR) $1080.01

Hydraulic Pump, Remanufactured, C5NN600AA - For Ford tractor models 2000 (3 cylinder engine), 3000 (3 cylinder engine), 4000 (3 cylinder engine), Replaces Ford OEM number C5NN600AA, 2 O-ring Ports, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 210260) $1268.01

Hydraulic Pump Repair Kit - This Comprehensive Hydraulic Pump Repair Kit contains items in image marked with an asterisk; 1 - Wobble Shaft D9NN966AA, 1 - Wobble Shaft Needle Bearing 169024, 1 - Idler Gear Shaft C5NN872A, 2 - Idler Gear Shaft Needle Bearings C5NNN900A, 1 - Wobble Shaft Bearing Plate C0NN859A, 6 9/16 Pistons C5NN615A, 6 5/8 Pistons NCA615C, 6 - Pistons Springs NCA861B, 6 Inlet Springs NCA647B, 6 - Outlet Springs C5NN646A, 12 - Balls 354872S, 6 - Seats C5NN885A, 6 - Cages C0NND844A, 6 Cages C0NND843A, 1 Bearing Cup 141296, 1- Bear Cone 141295, Seals C5NN851A, and Gaskets E4NN911AA, D6NN867A, C0NN869A, 1 Woodruff Key 81797891. Replaces CKPN600A, 81821107, 5A-1306. For Tractors 1965-1983 with Piston style pumps. (Item #: 185394, Ref: S65428) $312.00

Hydraulic Pump Repair Kit - For Ford tractor models 3000, 4000, Replaces Ford OEM number C5NN600-AA, Minor repair kit for 5.6 gpm piston type pump, (Item #: 169798) $47.50

Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Item #: 111682, Ref: CCPN600AB) $55.00

Hydraulic Pump Repair Kit - For tractor models 3000, 4000 (Except 4110) with 5.6 GPM Piston Type Pump 1965 and up. Contains springs, balls, gaskets and seals. Services C5NN600AA pump. Does not include Plate/Plate Assembly. Replaces: YTO FHPK600-5, 81815246, 81821210, 83908690, C5NN600A, C5NN600AA, C5NN600AB, C7NN600Y, CKPN600A, D4NN600A, D6NN600A, D6NN600B (Item #: 183463) $32.30

Hydraulic Pump Safety Valve - For (4000, 5000, 7000), (Major, Super Major, Power Major all 1952-1964. Hydraulic Pump Safety Valve. (Item #: 170946, Ref: E1ADDN984) $44.20

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Item #: 111681, Ref: NCA966E) $74.00

Hydraulic Pump Shaft - Wobble Shaft. For tractor models 2000, 3000, 4000, 2600, 3600, 4600 With Piston Type Pump, 1965 AND ABOVE WITH 6 Inch THREADED SHAFT. (Item #: 155295, Ref: C5NN966A) $84.00

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Item #: 124563, Ref: CODW4621A) $12.80

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114636, Ref: D5NN1201A) $6.00

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Item #: 124566, Ref: CODW4616A) $7.20

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114635, Ref: D5NN1202A) $2.80

Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3/4 ", SHAFT OVERALL LENGTH: 8-3/8 ", END A TYPE: Key, END A SIZE: 3/4 ", END B TYPE: 10 Spline, END B SIZE: 1 ". (Item #: 172481, Ref: 197118) $41.30

Hydraulic Pump, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3600, 3910, 4000, 4100, 4110, 4330, 4340, 4610, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, Replaces Ford OEM number 83996272, 83900640, 83928509, D3NN600A, D3NN600H, D4NN600B, E1NN600AB, E1NN600AA, Replaces Case OEM nos 83996272, Pump mounts to engine, Uses spin on filter, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For a new version of this item use Item #: 162462, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413149) $198.01

No
Picture
Hydraulic Pump, Used - For Ford tractor models 2000 (3 cylinder engine), 3000 (3 cylinder engine), 4000 (3 cylinder engine), 2 O-ring Ports, For a Remanufactured version of this part use Item #: 210260, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463695) $690.01

Hydraulic Pump Valve Assembly - Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAB. It replaces original part numbers 86512642 and NCA638C. (Item #: 178920, Ref: NCA638C) $132.00

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref: C0NN858A) $46.50

Hydraulic Quick Release Coupling, Male - Male Tip-Check Valve Assembly, Implement Half. 1/2 - 14 Pipe Thread 3000 psi. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30. (Item #: 119129, Ref: D5NNB964A) $10.70

Hydraulic Relief Valve - For tractor models 2000, 3000, 4000, 5000, 6000 (1965-1975). This valve is for piston or gear type in center housing. Replaces C7NN638E, 81818413 (Item #: 157746, Ref: C7NN638E) $52.00

Hydraulic Tube Elbow - Used on ford tractors built after 1965, this elbow replaces Ford part number C7NNE883A (Item #: 155019, Ref: C7NNE883A) $22.80

Hydraulic Valve Kit - Valve, Hydraulic, with handle, Single-Spool Multi-Valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 degree rotated handle. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 183392, Ref: HV4012) $297.00

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185318, Ref: HV4021) $728.00

Hydraulic Valve Kit - Kit Assembly, includes 2-Spool Valve with handle. Fits Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180002, Ref: HV4120) $1089.01

Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handle (has float on one spool). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. NIS (Item #: 183391, Ref: HV4121) $973.00

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185320, Ref: HV4020) $665.00

Hydraulic Valve Kit, Remote - Has double spool control to activate two double-acting remote hydraulic rams. Kit includes: B8210 diverter valve, control valve, pioneer breakaway kit, hoses and fittings. For DIESEL models: 2000, 3000, 4000, 2600, 3600, 3900, 2610, 3610, 3910, 4110, 4610. (Item #: B91468) $986.70

Hydraulic Valve O-Ring Kit - Hydraulic Valve Mounting O-Ring Kit. For 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 163398, Ref: DHPN485A) $8.70

Hydraulic Valve Seal Kit - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 681, 700, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230 (no cab), 3300, 3310, 3330, 3400, 3430 (no cab), 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130 (no cab), 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830 (no cab), 5000, 5030 (no cab), 5100, 5200, 5340, 7000, 7100, 7200, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 530A, 531, 3550, 4140, 4400, 4500, Replaces Ford OEM number 83900081, (Item #: 161249) $6.80

Hydraulic Wobble Shaft Plate - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Replaces 81813626. (Item #: 172706, Ref: NCA859A) $56.00

Lift Cover Gasket - Used of Ford Tractors 1965 and later, this gasket replaces OEM part numbers 957E502, E7NN502AA, C5NN502A, 83963584 (Item #: 113960, Ref: C5NN502A) $3.40

Lift Cover O-Ring Kit - O-Ring Kit for Lift Cover and Pump. For tractor models 2000, 3000, 4000, 5000, 7000. Kit Contains Kit contains: (1) 86484S9 (1) 87036ES (6) 87006S9 (1) 87037S94 (5) 87010S9 (1) 87038S94 (1) 87012ES (1) 87044S94 (1) 87016ES (2) C5NNN917A (9) 87033S94 (3) C5NNN991B (10) 87034ES (1) C7NNG997A (3) 87035ESB (1) D2NNB997A . Replaces CKPN485A, DEPN485A, 83900081 (Item #: 176447, Ref: B5001) $10.00

Lift Cylinder Safety Valve - For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3600, 3600V, 3610, 3900, 3910, 4000, (4110, 4120, 420, 445, 445A, 450, 4600, 4600SU, 4610, 515, 545A, 600, 6000, 601 1962-1964, ) 650, 660, 701, 800, 801, Dexta, Super Dexta. Also replaces 957E9842 and C5NN984A. (Item #: 169627, Ref: 957E984B) $21.00

Pivot Pin Nut - This Nut is used with D2NNH889A Pivot Pin. Replaces C9NNH891A, 86632551 (Item #: 180243, Ref: C9NNH891A) $0.50

Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $29.90

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Item #: 126615, Ref: 9N521) $8.10

Remote Control Kit - Single Spool, Single/Double Acting with Hoses - Female Couplers. This valve is spring loaded to neutral.For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Item #: 154875, Ref: S.68981) $310.00

Rod Pivot - Pivot for Hydraulic Control Valve Handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Item #: 183852, Ref: C9NND912A) $30.70

Selector Valve - The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Item #: 116871, Ref: E0NND960AA) $208.00

Swivel - Draft Control - For tractor models NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except Row Crop), Dexta, Super Dexta. (Item #: 185370, Ref: 957E692) $26.45

No
Picture
Valve - Valve, Single-Spool, (Non-Detent/Spring Centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 6600, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180424, Ref: E1NNB950AB) $620.00

No
Picture
Valve - Valve, Double-Spool, Pressure Detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: E2NNB950CA) $930.29

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 178924, Ref: HV5902) $199.00

No
Picture
Valve Assembly - Blue - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 6710, 7000, 7100, 7200, 7600, 7700, 7710, Replaces Ford OEM number C7NN488J, C7NN481E, C7NN488H, 82847532, 81819038, 81819039, 81819030, Valve Assembly - Blue, (Item #: 170943) $111.00

No
Picture
Valve Assembly - Green - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C7NN481G, C7NN418G, DDN481E, C7NN488M, C7NN488N, C5NN488T, 81819043, 81819032, 81819042, Valve Assembly - Green, (Item #: 170945) $83.00

No
Picture
Valve Assembly - White - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819036, C5NN488L, 81819029, 81819037, 82847531, 82847550, C7NN481D, C7NN488G, C7NN488F, Valve Assembly - White, (Item #: 170942) $91.00

No
Picture
Valve Assembly - Yellow - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819031, 81819040, 81819041, 82847559, C5NN488N, C7NN488L, C7NN488K, C7NN588K, C7NN481F, Valve Assembly - Yellow, (Item #: 170944) $91.00

Valve Handle - Handle with blue vinyl coated grip, for 1 and 2 Spool Valves. Overall length 11 1/4 inches. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 182840, Ref: D3NNB936A) $32.00

Valve Kit, 1 Spool - Kit Assembly, includes 1-Spool Valve (Non-Detent/Spring Centering), Hoses, Dust Cover, Couplers, Handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180000, Ref: DGPNB950S1-KIT) $964.00

Valve Kit, 1 Spool - These kits include Single Spool Valve (Non-Detent/Spring Centering), Hoses, Hose Couplers, Coupler Bracket, Self Closing Dust Covers and Handle Mounting Kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Item #: 180000, Ref: DGPNB950S1-KIT) $964.00

Valve Less Handle - Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 178975, Ref: HV4023) $536.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 180405, Ref: HV4033) $722.00

No
Picture
Valve Mount Kit - Handle and Valve Mounting Kit, Single-Spool. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 309972F) $41.61

No
Picture
Valve Mount Kit - Handle and valve mounting kit, single-spool. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 179210, Ref: 309973F) $243.00

Implements

Valve Lever Pivot Pin, Pack of 2 - This Valve Lever Pivot Pin is for factory remote valves. It is used with: C9NNH891A Nut, D3NNB936A Lever and C9NND912A Pivot. Replaces D2NNH889A, 81834237 (Item #: 133463, Ref: D2NNH889A) $12.10

Lights

Headlight Assembly, 12 Volt, Gray - (Single) 12-Volt, Metal Body and Bezel, gray enameled metal body, 5-3/4 inch diameter for the following tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Item #: 105330, Ref: 310068) $44.00

Headlight Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body and bezel, grey enamel finish. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Item #: 105329, Ref: 310066F) $57.00

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Item #: 111329, Ref: FAA13102A) $5.60

Headlight Rim - Headlight Rim, grey finish. Ring with bolt for 310066 (6 Volt) and 310068 (12 Volt) 5 7/8 inch diameter light units. For 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700, NAA. (Item #: 179208, Ref: C0NN13045B) $17.10

Headlight Set, 12 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. (Item #: 183740, Ref: 2N13005-12V) $159.00

Headlight Set - 6 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. Replacement sealed beam bulbs available as p/n L4019. (Item #: 183751, Ref: 2N13005-6V) $152.00

Headlight Switch - Headlight Switch and Nut is used on Ford 2000, 3000, 4000, 5000, 7000, all 1965 to 1975. For 2600, 3600, 4600, 5600, 7600, all 1975 to 1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981 to 8/1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981 to 8/1985, 7910, 8210, both 1983 to 8/1985. This is an NON-FUSED replacement. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. (Item #: 178059, Ref: C5NN11654A) $13.60

Headlight Switch - Headlight Switch and Nut is used on Ford 2000, 3000, 4000, 5000, 7000, all 1965 to 1975. For 2600, 3600, 4600, 5600, 7600, all 1975 to 1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981 to 8/1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981 to 8/1985, 7910, 8210, both 1983 to 8/1985. Can use D4NN11666RPL knob, not included. This is a fused switch. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. (Item #: 121154, Ref: 251405) $16.10

Light Switch - Switch with nut. This switch comes with a large knob for easy push / pull. For the original style with knurled knob, order FDN11654AOE. For 2000, 4000, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Item #: 121151, Ref: FDN11654A) $7.50

Light Switch Knob - This Light Switch Knob can be used with 251405 light switch or original equipment. Replaces part numbers D4NN11666A, D4NN11666RPLGV, D4NN11666RPL. (Item #: 180202, Ref: D4NN11666RPL) $9.60

Light Switch, OEM Style Knob - If you want your tractor to look as original as possible, this light switch has a knurled knob, like when it was new! Used on Ford tractors, 1955-1964 (Item #: 178063, Ref: FDN11654AOE) $9.40

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.50

Sealed Beam Bulb, 6 Inch - The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. It replaces Ford part number 310061. (Item #: 111244, Ref: 1002802M91) $18.90

Tail Light - This is a Duolamp Tail Light and Bracket Assembly used on Ford Tractors 1958 and later. Fits models: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801. Replaces: 310064, 86633401, 86639447, C5NN13403A, D2NN13403A. (Item #: 125323, Ref: 310064) $63.00

$Ford 4000 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $0.50

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Item #: 125325, Ref: 8N13423) $10.00

Work Light Assembly - 12 Volt - Worklight assembly, 12-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Item #: 183741, Ref: 8N15500-12V) $92.00

Work Light Assembly - 12 Volt Econ - This is an economy version of 8N15500-12V Worklight assembly. It is 12-volt sealed beam with on/off switch. It is close to original, but not exact. Includes 8N15532 fender bracket spacer. (Item #: 116776, Ref: 8N1550012VECON) $53.00

Work Light Assembly - 6 Volt - Worklight assembly, 6-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Item #: 125140, Ref: 8N15500-6V) $112.00

Worklight Installation Kit - Worklight installation kit for Ford Tractors 1958 to 1964. This kit includes; 311778 rubber boot, 311779 special clip, 311780 special cupped washer 8N-13472 and mounting bracket instructions. Fits models: 601, 701, 801, 901, 2000, 4000. (Item #: 183005, Ref: 309533) $26.50

Miscellaneous

3-Point Lift Piston - For Ford tractor models 3000, 3550, 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4410, 4500, Replaces OEM number 86563513, C5NN530A, (Item #: 165859) $39.00

No
Picture
Drive Clutch Piston Spring Retainer Snap Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 501, 541, 600, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3600, 4000, 4000SU, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 5000, 5100, 5110, 5200, 5600, 5610, 5610S, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4400, 4500, 8400 Replaces Ford OEM number PBB77517A, , Compatible with New Holland tractor models TB100, TB110, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number PBB77517A, (Item #: 176669) $5.50

Oil System

Dipstick, Engine Oil - Engine Oil Level Indicator measures about 14 3/4 inches overall length for 4 Cylinder Gas and Diesel, pre 1965. For tractor models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 122139, Ref: C0NN6750B) $10.00

Dipstick, Engine Oil - Length is approximately 10 inches overall length and 6 1/2 inches from the base of cap to end. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3190, 3300, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 5500, 650, 6500, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B. (Item #: 165076, Ref: C5NE6750D) $9.30

Driveshaft - Intermediate Shaft, Oil Pump Drive. For tractor models 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Item #: 169650, Ref: C7NN6A605A) $12.20

Filter Adapter, Spin-On - With seal. Fits (2000, 3000 and 4000 series 3 cylinder), (5000 4 cylinder) (tractors from 1965 to 10/1969). For use with spin on filter E7NN6714AA. (Item #: 113542, Ref: 309825) $36.00

Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Item #: 178074, Ref: EAF6866A) $10.00

No
Picture
Ford, C7NN6A605A, 81817359, Used - For Ford tractor models TW5, TW10, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5190, 5200, 5340, 5550, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 6500, 7500, Compatible with Ford Engine(s) 158, 175, 192, 201, 233, 256, 268, 401 Replaces Ford OEM number C7NN6A605A, 81817359, C7NN6A605, , Compatible with New Holland Skid Steer Loader(s) L783, L785, LS180, Compatible with New Holland Hay Cutting(s) 907, 909, 910, 912, 1100, 1112, 1114, 1118, 1495, 1499, For a new version of this item use Item #: 169650, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444465) $6.01

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Item #: 110499, Ref: 8N6734) $1.70

Oil Filler & Breather Cap - Oil filler and breather cap. Economy style for a pipe with a diameter of 1-1/2". OEM 8N6766B. Compatible with Ford Tractor(s) NAA, 2N, 8N, 9N, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (Item #: 113708) $4.98

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Item #: 189611, Ref: 8N6782A) $6.90

Oil Filler Cap - This Oil Filler Cap measures 2.325 inches outside diameter, 2.240 inches inside diameter, 2.005 tab to tab and .450 inches tab width. For 2000, 3000, 4000, 5000, 7000. (Item #: 121245, Ref: D0NN6766A) $5.50

Oil Filler Cap with Element - Oil filler cap measures 3 1/2 inches diameter. Insert is 1 1/4 inches outside diameter. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8 inches, 1 1/2 inch diameter tube and tube is 1 3/8 inches long. Also replaces OEM 8N6766B. (Item #: 121246, Ref: 310030) $10.00

Oil Filter - Engine Oil Filter, Cartridge Element, 2 quart. Measures 4 1/2 inches outside diameter, 11/16 inches hole diameter and 4 7/8 inches in length. For 3, 4 and 6 Cylinder Engines (1965 to 1979) on models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20. (Item #: 181771, Ref: DGPN6731A) $12.10

Oil Filter - Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3/4 inches long, 4 inch diameter with 3/4 inch diameter holes in each end. (Item #: 119300, Ref: CPN6731B) $16.60

Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. Replaces ECG6890A, EAA6838A, 87644685, CPN6882A (Item #: 115244, Ref: CPN6882A) $39.00

Oil Filter Mounting Gasket - This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Item #: 172949, Ref: EAA6838A) $1.30

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825. (40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.20

Oil Pan - Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 281, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630. Industrial 230, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 3550, 420, 4110LCG, 445, 445A, 4400, 4500, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Cast iron construction. Does not include gasket and plug. (Item #: 140613, Ref: C9NN6675A) $398.00

No
Picture
Oil Pan - Cast - For Ford tractor models 4000, 5000, 5030, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 650, 750, 755, 755A, 755B, 5500, 6500, 7500, Replaces Ford OEM number E2NN6676AA, 87800105, 87546750, 83936297, 500444, 81825236, C9NN6676E, D1NN6676A, Drain plug not included, (Item #: 140614) $399.00

Oil Pan Drain Plug - White Zinc finish, 7/8 inch - 18 UNF. Fits multiple models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200 thru 1969. Order EBU6734A washer if needed. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug - This 3/4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Item #: 140610, Ref: C9NN6730B) $3.70

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. Fits models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200. (Item #: 140612, Ref: EBU6734A) $1.70

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. Fits models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755A, 755B, 2000, 2110LCG, 2600, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pan Kit - 3 Cylinder Engines - SAME PAN AS C9NN6675A BUT NOT CAST IRON. THIS IS OF TIN CONSTRUCTION. Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 2600, 3600, 4000, 4600. Kit includes: sheet metal pan with drain plug. NOTE, This part does not come with the shown gasket. Gasket must be ordered separately as part number F0NN6710AA. Replaces 81822143, 81874150, C9NN6675A, and F0NN6675BB. (Item #: 125393, Ref: S.66514) $106.00

Oil Pan Plug Kit - Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 108080, Ref: 9N6730WG) $20.50

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Item #: 153774, Ref: D8NN9278BD) $5.90

Oil Pump Cover Gasket - Used on Ford 4 cylinder tractors, 1952-1964 with gear type oil pumps. (Item #: 189623, Ref: EAA6619C) $4.00

Oil Pump Drive Shaft, Hex - This Hex Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1954-1964. May also be in a 1952-1953 (Item #: 182495, Ref: EAF66646D) $26.00

Oil Pump Drive Shaft, Slotted. - This Slot Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1952-1953. May also be in a 1954-1964 if using a slot shaft Oil Pump. (Item #: 166349, Ref: EAF66646B) $8.30

Oil Pump Gear - Gear, Oil Pump Driven. For tractor models 2000, 4000, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Item #: 179980, Ref: EAA6614B) $33.41

Oil Pump, Hex Drive - Gear Type For applications with hex drive shafts (Shaft not included). For 134/172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Item #: 123913, Ref: EAE6621AB) $82.00

Oil Pump, Roto Type - For 144 CID or 172 CID DIESEL engine in tractor series: 501, 601, 701, 801, 901, 2000, 4000, including HD Industrial (1958 to 1964). Roto Type Oil Pump Hex Drive, 2 holes in bottom plate. Replaces C3NN6621B. Will retrofit 134 CID or 172 CID Gas Engine if necessary conversion parts have been installed when changing from Gear Type to Roto Type Pump. When Replacing C3NN6621A Gear Type, you will also need (1) D1NL6622A Cover and Inlet Tube, and (1) B9NN6730A Plug (These parts are not available through Yesterday's Tractors). (Item #: 161113, Ref: D1NL6600A) $107.00

Oil Pump with screen - Complete Oil Pump Assembly with Lower Screen. For models: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA, E1NN6600DC, E1NN6600DB. (Item #: 113205, Ref: E1NN6600DD) $59.00

$Ford 4000 Pump Gear\Shaft Assembly$
Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: TW5, TW15, TW25, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, 230A, 233, 234, 250C, 260C, 333, 334, 335, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B. Replaces E9NN6A820AA, 87800008, C7NN6A820C, D3NN6A820E, 3984954, 81845748, 73345660, 81822957, 81837148, 83984954, 81843777, 81834095, D3NN6A820F, D3NN6A820G, C7NN6A820A, D0NN6A820A, C7NN6A820B, D3NN6A820A, D3NN6A820D, 87764586, 87764587, 81859340, 81844832, 81845749, 81818742, 87763956, D3NN6A820B (Item #: 140555, Ref: E9NN6A820AA) $28.80

Seal, Oil Filter Adapter - 2 quart to 1 quart spin on or use 309825. For tractor models 2000, 3000, 4000, (5000 1965-10/1969). (Item #: 155429, Ref: D8NN6N818AA) $7.60

PTO / Driveline

Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Item #: 180397, Ref: 9N715BC) $6.10

Friction Plate - Clutch Friction Plate measures 5.25 inch outside diameter, 45 internal splines and has a thickness of .063 inches. VERIFY THICKNESS as there was originally more than one size. 6 Used in most applications. Sold individually. Fits models: 550, 555, 555A, 555B, 655, 655A, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 4000, 4110, 4500. Replaces 81804831, C0NN7B164B, C0NN7B164A. (Item #: 118132, Ref: C0NN7B164B) $11.10

Input Shaft Seal - Used with Transmission driven PTOs. It is used am many Ford / New Holland Tractors. Measures I.D. 1.0675 inch, O.D. 2.1940 inch, W. 0.5000 inch. (Metric 28.5 x 55.5 x 12.4mm). Replaces E81GD9, D9NN7R510BA, 83924524, 83924924 (Item #: 173499, Ref: D9NN7R510BA) $4.50

PTO Brake Arm - This PTO Brake Arm is used on 250C, 260C, 2810, 2910, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4400, 445, 445A, 445C, 445D, 4500, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D (Item #: 173002, Ref: C9NNN747A) $23.80

PTO Cap - This PTO Cap is 4 inches long. It will not work on 5 inch PTO shafts. It has 65mm outside threads. It replaces OEM numbers: C5NN726B C5NN726A, SBA378110020, 81801856, 47811118 (Item #: 155020, Ref: C5NN726A) $23.20

PTO Cap - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Item #: 109510, Ref: 310088) $7.80

PTO Cap - This PTO Cap is for 1-1/8 or 1-3/8 inch PTO shafts. Like original. 3 1/2 inches in length. Inside usable length is 2 7/8 inches. Replaces 2N726, NCA726A, 2N726, NCA726A (Item #: 125614, Ref: 2N726) $9.30

PTO Cap - Short - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 4190, 4200, 4330, 4340, 4400, 4410, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4040, 4140, 4500, Replaces Ford OEM number 310088F, (Item #: 155022) $9.40

PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283) $4.10

PTO Clutch Plate, External Splines - This Disc is used in tractors with Independent PTOs. It measures 5.47 inches Major/ 5.278 inches Minor Outside Diameter, 3.91 inches Inside Diameter, 0.070 inches Width, 54 Teeth. 1P77518A, 83918314, C8AP7B442A, P77573A1, T100680, V32773200 (Item #: 155469, Ref: C8AP7B442A) $5.00

PTO Countershaft - 6/23 spline, 12.0625 inches long. For tractor models (2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4110, 4330, 4340 all with Transmission PTO). (Item #: 173444, Ref: C5NN702A) $188.51

PTO Countershaft - 11/6 spline, 24.250 inches long. For tractor models (2000, 3000, 4000 all with live PTO and 6 or 8 speed transmission). (Item #: 167799, Ref: C7NN702B) $178.51

PTO Coupler - This PTO Coupler is inside the tractor. It is used on 4 and 5 speed transmissions, 1955 and later. It is 2.16 inches long. (Item #: 173003, Ref: NCA717A) $103.00

PTO Friction Disc - PTO Friction Disc with Internal Splines. For tractor models 4000, 4100, 4600. (Item #: 150772, Ref: C5NNP743B) $14.20

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Item #: 109986, Ref: C5NN747A) $1.00

PTO Input Shaft - 15 Tooth Input Shaft. Fits 2810, 2910, 3900, 3910, 4100, 4110, 4600, 4610 (most industrial and utility models after 1975 with 8 speed or 6x4 Manual Reversing Transmission). 4000 (1965 and newer) Note: Can Replace the 17 tooth Input Shaft on 4000 models prior to 1972 BUT you must also order Gear Assembly part number D1NN791A. (Item #: 115256, Ref: D1NN772B) $199.00

PTO Input Shaft - This PTO Input Shaft measures 10.7 inches long, has 17 helical teeth and 29 splines. For tractor models (2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 all 1965 and up with live PTO), (231, 233, 2600, 333, 3600, 531 all 1975 and up with live PTO)< (234, 2610, 334, 530A all 1981 and up with live PTO). (Item #: 112078, Ref: C5NN772A) $299.00

PTO Input Shaft - This PTO Input Shaft is 11 3/4 inches long. It has 17 Helical Teeth. It is used on Ford 4000 with Independent PTO. It replaces original part number C5NN772C (Item #: 179709, Ref: C5NN772C) $195.00

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $4.50

PTO Plate, Remanufactured, F0NN7550EA - For Ford tractor models Dexta (1955 - 1964), Super Dexta (1955 - 1964), 600 (1955 - 1964), 601 (1955 - 1964), 700 (1955 - 1964), 701 (1955 - 1964), 800 (1955 - 1964), 801 (1955 - 1964), 900 (1955 - 1964), 901 (1955 - 1964), 1800 (1955 - 1964), 2000 (1955 - 1964), 2031 (1955 - 1964), 2100 (1955 - 1964), 2110 (1955 - 1964), 2111 (1955 - 1964), 2130 (1955 - 1964), 2131 (1955 - 1964), 4000 (1955 - 1964), Replaces Ford OEM number F0NN7550EA, D8NN7550EA, E55GC9, 82006018, Clutch Size: 9", Clutch Hub: 1-7/8", Clutch Spline: 29, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206250) $76.00

PTO Seal - This PTO Input Shaft Oil Seal is for models with live or independent PTO. Seal Measures .984 inches inside diameter, 1.496 inches outside diameter and .236 inches in width. For models Dexta, Super Dexta, (2000, 3000 and 4000 all with 6, 7 and 8 speed transmissions), (2610, 3610, 4100, 4110, 4600, 4610 all with 8 speed transmission). Replaces part numbers A-VPH1413 and 81717245. (Item #: 173453, Ref: 957E727A) $4.80

PTO Shaft - For tractor models (3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965-1975), (3900, 4600, 515, 532, all Jan 1975-Sep 1980), 340, 340A, 340B, 445, 445A, 540, 540A, 540B, 545, 545A, all Jan 1978-Sep 1980). PTO Shaft Replaces C5NN710A, 30.625 inches long, 6 and 26 splines. Use D3NN7A693A PTO Housing Bearing for this shaft, not included. (Item #: 153457, Ref: D3NN710D) $163.00

No
Picture
PTO Shaft Bearing - This PTO Shaft Bearing is used with D3NN710D PTO Shaft. It has an inside diameter of 1.772 inches (45.008 mm), outside diameter of 3.346 inches (84.988 mm) and a width of 0.748 inches (18.999 mm). For Ford models: 3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 3900, 4600, 515 and 532 tractors. (Item #: 112095, Ref: D3NN7A693A) $17.30

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Item #: 178129, Ref: E75GE9) $7.00

PTO Shaft, Conversion Assembly - PTO Conversion Assembly. Converts to 1-3/8 inch shaft. Ford tractors: 600, 700, 800, 900. DOES NOT FIT SELECT-O-SPEED models. Includes all necessary parts: Shaft, bearing, bushing, seal for tractors which had factory installed 1-3/8 inch diameter shafts which include the 501, 601, 701, 801, 901, 2000 4 cylinder, 4000 4 cylinder (converts 1-1/8 inch diameter shaft to 1-3/8 inch diameter shaft, 6 spline). Length 32 11/16 inches. If you need a gasket, order C5NN747A. For a cap, order 310088 or 2N726. (Item #: 111553, Ref: NCA700-38) $110.00

PTO Shaft Housing - PTO Shaft Housing. For 2000, 4000, 600, 700, 800, 900. All originally equipped with 1 3/8 inch PTO shaft. (Item #: 172872, Ref: 310089) $100.00

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1/8 inch or 1-3/8 inch PTO shaft. 2.45 inch outside diameter, 1 5/8 inch inside diameter, 5/8 inches wide. Replaces OEM numbers : D8NN703AA and D9NN703BA, and 9N703B. (Item #: 111314, Ref: D9NN703BB) $4.00

PTO Shaft Sleeve - For tractor models 2000, 3000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. All with 1 3/8 inch PTO diameter. Replaces 310087, E7NN797BA, 83964336. (Item #: 160091, Ref: E7NN797BA) $8.10

PTO Shaft Thrust Bushing - This Thrust Bushing for the PTO Shaft measures .930 inches long and 1.634 inches inside diameter. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA. All with 1.125 inch or 1.375 inch diameter PTO shaft. (Item #: 169903, Ref: NAA798A) $34.10

PTO Shifter Support Housing - Fits: 2000 4 cylinder, 4000 4 cylinder, 650, 651, 660, 661, 850, 851, 860, 861, 950, 951, 960, 961 all with 5 speed transmission 1954 - 1964. Replaces: NDA770B. (Item #: 125649, Ref: NDA770B) $112.00

PTO Stop - This PTO Stop is used on 3, 4 and 5 speed transmissions. 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000-4000 4 CYLINDER, 2000, 3000, 3400. (Item #: 113727, Ref: NAA722A) $20.20

Snap Ring - The is a PTO Housing Bearing Retaining Snap Ring measures about 3 1/8 inches outside diameter and 2 5/8 inches inside diameter. It is used on multiple Ford Tractors using a 1.375 inch PTO. Replaces original part numbers 81809581 and 314267. For tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 and 4000. (Item #: 172927, Ref: 314267) $13.70

Seats

Pan Seat - This 19 inch wide Fixed Seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, all with 4 Cylinder Engine. This is not a Flip-Over Seat. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $50.00

Pan Seat - 19 inch wide Flip-Over Style. Replaces OEM number C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 8N, 9N, 2N (4-Cylinder). May come different color than pictured. (Item #: 101239, Ref: C5NN400AE) $60.00

No
Picture
Pan Seat, 19" Cushion with 7" Spacing, Vinyl, Black, Used - For Ford tractor models 1110, 1210, 1310, 1510, 1710, 1910, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2810, 2910, 3000, 3055, 3100, 3300, 3310, 3330, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4610, 5000, 5100, 5200, 5900, 6600, 6700, 7000, 7100, 7200, Compatible with Ford Construction and industrial models 340A, 340B, 345D, 445, 445A, 445C, 445D, 450, 515, 540A, 540B, 545A, 545C, 545D, 3500, 4400, Replaces Ford OEM number E7NN420AA, E7NN400GA, D8NN400BABB, E2NNA405AA99M, Black vinyl vacuum formed with contoured foam, 2 center drain holes, For a new version of this item use Item #: 101228, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401228) $64.80

Seat Assembly - Black. Base (Footprint) measures 8 1/4 inches long and 4 1/4 inches wide. For tractor models 2000, 3000, 4000, 5000, 7000, 4100, 2600, 3600, 4600, 5600, 6600, 7600, 4110, 2610, 2810, 2910, 3610. (Item #: 178457, Ref: E7NN400GA) $298.00

Seat Assembly - Bucket Seat with arm rests in blue vinyl. For tractor models 2000, 3000, 4000, 5000, 7000. (Item #: 178486, Ref: R1263) $530.00

Seat Bottom - Blue Vinyl on steel For 2120, 2300, 2310, 2600, 2610, 2910, 3055, 3100, 3120, 3150, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, Late 4000, 4100, 4110, 4200 (Item #: 178474, Ref: R0861) $338.00

Seat Cushion, Black - This Black Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces D1NNA405B, D2NNA405B, D2NNA405BAK, E2NNA405AA99B. (Item #: 101228, Ref: E2NNA405AA99M) $110.00

Seat Cushion, Blue - This Blue Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces C7NNA405R, D0NNA405C, D1NNA405A, D1NNA405B, D2NNA405B, D2NNA405BAK, D8NN400BABB, E2NNA405AA99B, E2NNA405AA99M, E7NN400GA, E7NN420AA. (Item #: 101227, Ref: E2NNA405AA99MBL) $103.00

Seat Hinge - Fits Models: 8N, NAA, 2000, 4000, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 900, 960. Can replace OEM part number 86531095. This hinge is made for the 2 3/8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Item #: 101240, Ref: R0643) $20.00

Seat Pin and Bushing Kit - For tractor models (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000 all with Rest-O-Ride seat), 4000, 4100, 4110, 4130, 4140, (6000 with regular seat). (Item #: 179145, Ref: R5117) $40.50

Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 with 4 cylinder engine. 2 3/8 inches wide. May require modification of bolt holes for an original hinge. (Item #: 101241, Ref: NCA404B) $52.21

Seat Spring, Rubber - Left - For Rest-O-Ride Seat on models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 1800, 2000, 4000. Rubber Seat Spring - Left. Price is for a SINGLE spring. (Item #: 105322, Ref: NDA448A) $48.00

Seat Spring, Rubber - Right - For Rest-O-Ride Seat on Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 1800, 2000, 4000. Rubber Seat Spring - Right. Price is for a SINGLE spring. (Item #: 105323, Ref: NDA447A) $44.00

Suspension Seat - New Ford/New Holland replacement seat. Complete seat with suspension, blue. Fits Ford / New Holland Compact tractor models: 1110, 1210, 1310, 1510, 1710, 1910; Fits Industrial/Construction models: 340A, 340B, 345D, 3500, 445, 445A, 445C, 445D, 450, 515, 540A, 540B, 545A, 545C, 545D; Tractor models: 2100, 2110, 2120, 2150, 2300, 231, 2310, 234, 2600, 2810, 2910, 3000, 3055, 3100 3300, 3310, 3330, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 5000, 5100, 5200, 531, 532, 5600, 5900, 6600, 6700, 7000, 7100, 7200. There is a plate on the bottom that is 4 inches wide and 8 1/4 inches long. In the center of this plate are 2 slots that are 3/8 inches wide, 1/4 inch from each edge and 1/2 inch apart and they are about 4 inches long. Overall width is 19.5 inches, overall length of base is 15.25 inches, overall height of base is 9.25 inches. (Item #: 101226, Ref: CSA698-8V) $216.00

No
Picture
Tie-On Seat Cover - Tie-On Seat Cover. 19 inch Tie-On Cover with White Script Ford Logo. Fits models: NAA, 2N, 8N, 9N, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 4000. (Item #: 178809, Ref: R4117) $36.30

Sheet Metal / Body Parts

Air Cleaner Door - Air Cleaner Louvered Door restoration quality. For NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 158443, Ref: NAA9661B) $24.30

Battery Box - For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953 to 1964. Replaces NCA 10432A. Comes with a rough coat of primer. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN and NCA10728WN. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104045, Ref: C0NN10732T) $43.00

Battery Hold Down - Bolt with nut. For tractor models 2000, 3000, 4000, 5000. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113581, Ref: C5NN5161CWN) $4.90

Battery Tray - Battery Tray 20-1/2 inches by 9 inches. For tractor models (2000, 3000, 4000, 5000 1967 and up with 128 amp battery), 2100, 3600, 4100, 4600, 5110, 5610, 5900, 6410, 6610, 6810, 7610, 7810. INDUSTRIALS: 223, 250C, 260C, 333, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 450, 455D, 540, 540A, 540B, 545, 545A, 545C, 545D. Also replaces D6NN10723E, D3NN10723A AND C5NN10723M. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104046, Ref: E4NN10723AA) $89.07

Battery Tray, DIESEL - This battery tray fits the following DIESEL tractors from 1965 to 1967: 2000, 3000, 4000, 5000. INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500 (all 1965-1967). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Tray dimensions 19-3/4 inches x 9 inches. VERIFY OEM PART NUMBER. Some of these models used more than one different type during the mentioned production runs. (Item #: 115047, Ref: C5NN10723H) $127.00

Bottom Grill Panel - This Bottom Grill Panel is used on Ford 2000 and 4000, 1964 and earlier. Fit to Tractor Before Painting. Replaces C3NN8190A (Item #: 182924, Ref: C3NN8190A) $128.00

Bumper - Fits tractor models: 4000, 5000, 7000, 5600, 5900, 6600, 7600. Replaces C5NN17750C. (Item #: 156289, Ref: S.61053) $100.00

Bumper - This is a new aftermarket style Bumper. It has a trailer hitch. Comes primer coated. Used on NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (1962-1964), 3000, 4000SU, 2600, 3600, 4100, 4600SU, 2610, 3610, 4110, 4610SU. (Item #: 113512, Ref: S.60709) $138.00

Bumper Bolt Kit - For Ford tractor models NAA, 600, 601, 800, 801, 2000, 2031, 2130, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4121, 4131, 4140, 4200, Compatible with Massey Ferguson tractor models TO35, 35, Replaces OEM number 351505S8, 33806S34, 354369S8, Used on bumpers 104060, 113401, 113512, 113511, Zinc Plated, Includes 2 Bolts, Flat Washers, Lock Washers, Nuts, 5-8 x 18 x 4", (Item #: 126104) $14.70

Bumper - Heavy Duty - For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000, (4000SU with I-Beam Front Bumper). Additional $15 shipping due to weight. Welded, not riveted. Slightly different than original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104060, Ref: 311541HD) $225.31

Bumpers 6 Per PKG - Bumper, Hood Tip Center Panel Rubber Bumper Kit {6 per pkg}. For tractors: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1953-1957}. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178019, Ref: 354177S6) $5.30

Bumper, Side Panel To Hood - This pad fits between the top of the front side panels and the hood. Used on Ford Tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. It is glued in place. Replaces original part number NAA88131B. (Item #: 178076, Ref: NAA88131B) $3.98

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Item #: 104070, Ref: D5NN16312LR) $117.00

Fender Bolt Kit - For Ford tractor models NAA (when not equipped with sway bar brackets or loader brackets), 2N, 8N, 9N, 501, 540, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (4 cylinder), 2031, 2110, 2111, 2120, 2130, 2131, 4000 (4 cylinder), 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Compatible with Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 30, 35, 40, 50 (when not equipped with sway bar brackets or loader brackets), 65, 135, 150, 230, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50 (when not equipped with sway bar brackets or loader brackets), 65, 202, 203, 204, 205, 2135, 2200, Compatible with Massey Harris tractor models 50 (when not equipped with sway bar brackets or loader brackets), Compatible with Oliver tractor models Super 55, 550 (when not equipped with sway bar brackets or loader brackets), Compatible with White tractor models 2-44 (when not equipped with sway bar brackets or loader brackets), Replaces OEM number 353648X14, 364918X14, 375651S8, 3541315S36, 372457S36, 900157, Kit includes 4 (6-1/2") carriage bolts (5/8" NC), nuts, lock washers, Use with fenders 100026, 104069, 104070, 104072, 125421, For OEM Quality use Item #: 183747, (Item #: 154411) $37.00

Fender Bolt Kit 4 Per PKG - Bolt Kit, Rear Fender Bracket to Axle Housing, bolts 6 1/4 inch x 5/8 inch, nut and washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, and some early 2000 and 4000. (Item #: 183747, Ref: 355310-KIT) $27.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 and 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104072, Ref: D5NN16312LRS) $190.00

Front Bumper - Axle Mount - High quality bumper with mounting brackets. Mounts to axle. Blue. (Item #: 113401, Ref: D8NN17750AA) $210.00

Front Bumper - Frame Mount - For Ford tractor models 4000, 4500, 5000, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610, Replaces Ford OEM number C5NN17750C, 8391579, 87045743, Frame mount, Measurements 21-1/8 " inside bracket to inside bracket, Bolt Hole Pattern 4 " on C to C, Comes primered (color may vary). Prior to painting check fitment, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109631) $130.00

Front Grill - Fits 2000 and 4000. Both using 4 Cylinder Gas Engines only. 1962 TO 1964. Lettering not included. FORD letters available as part # 86514060. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104062, Ref: C3NN8200A) $89.00

Front Grill - This is an aftermarket metal replacement. It is close but not exactly like the original. The hand crank hole may come round or oblong shaped. For 4 cylinder Ford tractors 1953-1964. Replaces NCA8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104067, Ref: 713477) $149.98

Front Grill Stud - This is a Front Grill Stud for tractor models 2000, 2110LCG, 3000, 3400, 4000, 4110LCG, 5000, 7000. Replaces OEM 9828014, C7NN8N043A, C9NN8B151B. Priced each. (Item #: 121227, Ref: C9NN8B15B) $5.70

Grill Assembly, Front - Metal 2-Piece Grill for 2000, 3000, 4000, 5000 (1965-3/1968). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C5NN8A163A Upper Grill and C5NN8202AA Lower 20.625 inches wide Grill. (Item #: 111889, Ref: C5NN8A163A) $122.00

Grill, Bottom - Bottom Grill, Plastic For 2000, 3000, 4000, 5000, 7000 (4/1968 and up). It is 17.625 inches wide and 14.625 inches high. (Item #: 104065, Ref: D1NN8151A) $19.00

Grille Screen - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5340, 7000 (all '65-March '68), Compatible with Ford Construction and industrial models 4140, Replaces Ford OEM number C5NN8A163A, 17.50" x 7.25", (Item #: 111888) $57.00

Grill, Front, with Inset Headlights - For tractor models (2000, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3500, 3550, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4500, 5000, 5100 all built between 1/1965 to 12/1974), (2150 from 1/1970 to 12/1974), (3400 from 1/1965 to 9/1975), (4410 from 1/1969 to 12/1974), (5340 from 6/1968 to 12/1974), (7000, 7100, 7200 from 10/1971 to 12/1974). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 160785, Ref: D1NN8151B) $38.50

Grill Insert Upper - For tractor models 2000, 3000, 4000, 5000 (1971-1975), 4200 (1971-1975), 5200, 7200 (1968-1975), will not fit 3400 and 3500. This is a Grey Plastic Insert with Red FORD Letters. (Item #: 104064, Ref: C9NN8A163AG) $17.90

Grill Panel, Upper - Aluminum. Looks similar to part number C9NN8A163AG but does not come with FORD Emblem (available separately as part number 86514060 found in the Emblems and Decal section for this tractor). Bare metal. For tractor models 2000, 3000, 4000, (5000 1968-1/1970). (Item #: 160783, Ref: C7NN8150G) $123.00

Grill Screen - Lower Grill Screen for three and four cylinders up to 1965-3/1968. 20.625 inches wide, 15.500 inches high. For tractor models 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 5000, 5100. (Item #: 111825, Ref: C5NN8202AA) $86.00

Grill Screen Clip - This Grill Clip fits the following tractor models: 2000, 3000, 4000, 5000, 5600, 6600, 7000, and 7600. Replaces part numbers: 81816917 and C7NN8A067A. (Item #: 163166, Ref: C7NN8A067A) $1.80

Grill with Light Holes - For tractor models 2000, 3000, 4000, 5000, 7000 4/1968 and up. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 160785, Ref: D1NN8151B) $38.50

Hood Front Panel - This is a new Front Nose Cone used from 1963-1964 on: 2000 4 cylinder, 2030, 2031, 2111, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4120, 4121, 4130 4 cylinder, 4131 Tractors. It replaces original part number C3NN16A858A. (Item #: 182966, Ref: C3NN16A858A) $137.00

Hood Handle - Handle Assembly, engine hood right hand side. For 2000, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3230, 333, 335, 3430, 3600, 3610, 3900, 3930, 4000, 4110, 4140, 420, 4600, 4610, 4830, 5000, 5030, 515, 531, 532, 535, 5600, 5610, 5910, 6600, 6610, 7000, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C5NN16N644B, D6NN16N644A, 83909243. (Item #: 113917, Ref: D6NN16N644A) $8.20

Hood Hinge - THESE FIT AFTERMARKET HOODS ONLY. These will NOT work for original hoods. Replaces 81811486, C5NN16N631B, C9NN16N631A (Item #: 179348, Ref: C5NN16N631B) $19.60

Hood Latch Assembly - This Hood Latch Assembly is used with Top Hood Door Latch (not included) part number NAA16628C. Two are used per hood. It is used on Ford Tractors NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. Replaces original part number NAA16645C. (Item #: 178160, Ref: NAA16645C) $49.80

Hood Latch - Right Hand - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 3000, 4000, 5000, 7000, 7100, 7200, Replaces Ford OEM number 85700110, E1ADKN16658, DKN16658, Without Handle, Fits Right Hand Side, (Item #: 163647) $14.60

Hood Latch Spring - For tractor models Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 with 4 cylinder gas engines). (Item #: 178099, Ref: NAA16925B) $12.90

Hood Panel - Left Hand - For Ford tractor models 2000, 3000, 4000, Replaces Ford OEM number C5NN16625G, Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155809) $83.51

Hood Prop Rod - This hood prop rod is 17 1/2 inches and used on 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D. It Replaces original part number C7NN8042A. (Item #: 178161, Ref: C7NN8042A) $9.50

Hood, RH - For tractor models 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, 4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155814, Ref: D3NN16625M) $89.00

Hood Screw Kit, 6 Piece - Ford Hood Screw Kit, 6 Piece. Used to secures rear of hood to dash board. 5/16 inch x 24 Phillips head w/ pilot. Used on Ford 1953 to 1964 4 cylinder tractors. (Item #: 125719, Ref: 354425S) $9.90

Instrument Panel - Fits 2000, 3000, 4000, 5000, 7000, 5900, 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 5610, 6610, 7610, 230A 231, 334, 335, 340A, B, 420, 445A, 450, 515, 530A, 531, 535, 540A, B, 545A (less Select-o-speed, Dual Power, Cab, Torque Converter). Replaces D0NN16N627R and D8NN16948DB. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 172723, Ref: D0NN16N627R) $273.00

No
Picture
Nose Cone and Grill Assembly - This Nose Cone and Grill Assembly replaces D1NN8151A C9NN8A163AG C7NN8N202V D4NN8N202D. Note: Lower Grill does not snap in like original. Chrome Knobs unthread to remove grill. There are no holes drilled for Headlights. Will work on Gas models with some modification. (Item #: 182996, Ref: C7NN8N202V) $522.00

Radiator Cover - For tractor models 4000, 5000 both after 1968. Does not have hole for Air Cleaner. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104061, Ref: C5NN8N202L) $336.00

No
Picture
Radiator Shell Cowling - This Radiator Shell Cowling is for models (4000, 5000 after 1986), 5600 and 6600. Uses Grill D5NN8200A-OEM. (Item #: 104061, Ref: D4NN8N202M) $336.00

Radiator Shell Cowling With Grills - Note: Lower Grill does not snap in like original. Chrome Knobs unthread to remove grill. Also, there are no holes drilled for Headlights. This is used on Ford 4000, (not 4000 SU) and 5000 4/68 and later. Replaces D0NN8N202K (Item #: 182864, Ref: D0NN8N202K) $377.00

Rubber Hood Pads - For all models after 1965 with Front Cowling that surrounds the Grill/Radiator. These rubber pads fit onto cowling under hood. Models: 231, 233, 333, 515, 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4110, 4600, 4600SU, 5000, 5600, 6600, 7000. Replaces C5NN16N655B, C5NN16N655A. (Item #: 113797, Ref: C5NN16N655B) $1.20

Running Board Bracket - Front - For tractor models 8N, NAA, 600, 601, 700, 800, 801, 900, 2000, 4000. All WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket right or left side. Price is for EACH bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 152392, Ref: 8N16470) $25.30

Side Panel, Left - Front Left Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C3NN16653B, NCA16653A. (Item #: 104058, Ref: C3NN16653B) $110.00

Side Panel - RH - Front Right Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces NCA16652A, C3NN16652B. (Item #: 104057, Ref: C3NN16652B) $92.00

Steering Sector Cover - For Ford tractor models 3120, 4000, 5100, 5600, 6600, 7100, 7600, Replaces Ford OEM number C7NN3R654A, 81822068, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 159308) $99.00

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $27.50

Top Hood Door Latch - The new Top Hood Door Latch is used in Ford Tractors from 1953-1964. Models: NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1800, 1801. It is used with NAA16654C latch assembly. It replaces original part number NAA16628C. (Item #: 179284, Ref: NAA16628C) $12.50

Wheel Weight, Rear - For Ford tractor models TW5, TW15, 2810, 2910, 3000, 3600, 3910, 4000, 4600, 4610, 5000, 5600, 6600, 6610, 7600, 7610, 7710, 7810, Compatible with New Holland tractor models 7010, 8010, Replaces New Holland OEM number 82004206, 820026905, 82029581, OD: 18-3/8 ", ID: 10-1/8 ", Thickness: 2-3/8 ", Weight: 100 lbs each, Hole Pattern: 3 @ 10-3/4", Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 128842) $160.00

Steering

Axle Pin Bushing, Front - Bushing for front axle pin, manual or power steering. For tractor models 2000, 3000, 4000. Used 1965-7\1970. Measures 2.286 inches O.D., 2.156 inches I.D., and 1.500 inches long. (Item #: 111729, Ref: C5NN3153C) $9.10

Axle Pin, Flange, Locking - For tractor models with all purpose and LCG front axles 1953 Thru 1964. Fits 600, 601, 800, 801, 2000, 4000. All using part number NCA3127A axle pin. (Item #: 112058, Ref: NCA3128A) $18.80

Axle Pin, Front - Front axle pin, manual or power steering. Outside diameter 1.750 inches, inside diameter 1.125 inches, length 4.960 inches. For tractor models 2000, 3000, 4000 and their variant. (Item #: 151913, Ref: C5NN3127B) $32.00

Axle Pin, Front - This Heavy Duty Front Axle Pin is threaded. 1.750 inch outside diameter, 4.71 inch long, 4.00 inch usable length. For the following models built after 7/1958: 601, 701, 801, 901, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Uses C5NN3128B Flange. (Item #: 172932, Ref: 312659) $101.00

Axle Pin Locking Plate - This locking plate is used with 312659 Pin. Replaces C5NN3128B. (Item #: 153968, Ref: C5NN3128B) $11.70

Axle Pin Support Bushing - This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Item #: 110832, Ref: 2N3039) $7.70

Axle Pin, Threaded - 1.750 inch outside diameter, length is 4.5 inch. For tractor models with all purpose and LCG front axles 1953 thru 1964. Fits 600, 601, 800, 801, 2000, 4000. (Item #: 112057, Ref: NCA3127A) $21.40

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.40

Ball Bearing, Steering Gear - Used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Item #: 167684, Ref: 83424343) $0.50

Bolt, Radius Rod to Front Axle - Length is 5-1/2 inches, 5/8 inch-18 thread. Head outside diameter is 7/8 inches. Fits the following tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (up to 1964), 4000 (up to 1964). Two used per tractor. Sold individually. Replaces 957F3415A, 86531713, NAA3415BGV, NAA3415B. (Item #: 152353, Ref: NAA3415B) $8.60

No
Picture
Drag Link - For Ford tractor models 4000, 5000, Replacement drag link for 104049 conversion kit. Will NOT fit oem power steering systems., (Item #: 176329) $80.00

Drag Link Assembly - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000, 2031, 2130, 2131, 4000, 4031, 4120, 4121, 4131, 4131 (All 4 Cylinder Without Power Steering 1953-64), Replaces Ford OEM number 8N3287, 957E3287, C5NN3N295B, NAA3270A, NAA3290A, NAA3307B, NAA33271A, 87048406, NAA33315A, Length Adjustable 42-3/8" to 46-1/2" Center To Center Tie Rod Studs., (Item #: 125344) $125.00

Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Left Hand. (Item #: 182955, Ref: NAA3305) $114.00

Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Right Side. (Item #: 182956, Ref: NAA3304) $114.00

Drag Link Clamp - This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Item #: 184034, Ref: 8N3287) $6.10

Drag Link Clamp - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2120, 2130, 2131, 2300, 2310, 2600, 2610, 2910, 3000, 3100, 3110, 3120, 3300, 3310, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 530, 531, Replaces Ford OEM number 957E3287, 8N3287, (Item #: 104589) $5.40

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Item #: 178150, Ref: 9N3324OE) $16.80

Drag Link End - End, Rear, Right Hand, 29.625 inches to center of post, for Drag Link with Power Steering. For 2000, 2100, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340 (All 1/65 - 12/74), 4600, 4610 (All 10/84 - later). Compatible with Ford Construction and Industrial(s) 230A, 231, 234, 334, 335, 530, 531. (Item #: 104591, Ref: C5NN3307G) $100.00

Drag Link End - End, Rear, Left Hand, 28.125 inch tube length, for Drag Link with Power Steering. (2000, 3000 1965 to 1975), 2600, 3600, 4100 (1975 to 1981, less cab), 2610, 3610, 4110 (1981 to 9/1984). Replaces C3NN3308E, C5NN3306E, C5NN3308E, 81802895. (Item #: 104590, Ref: C5NN3308E) $110.00

Drag Link End - End, rear, 41.25 inches to center of post, for Drag Link with Power steering. For 4000, 1972-1975 and 4600. Replaces D0NN3307A, 81825596. (Item #: 104612, Ref: D0NN3307A) $84.00

Drag Link End, Front - A= 4.00 inches, B= .813 inches, 16 left hand thread. For tractor models 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 801, 851, 861, 2000, 4000. (Item #: 104578, Ref: 309591) $49.40

Drag Link End, Front - A= 4.00 inch, B= 13/16 inch, 16 left hand thread. For tractor models: 3000, 335, 3400, 4000, 4410, 532. (Item #: 104593, Ref: C5NN3A300C) $25.40

Drag Link End, Front - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A-N) $11.30

Drag Link End, Front - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A) $11.30

Drag Link End LH - For tractor models 335, 3000, 3400. ALL with Manual and Power Steering with Non Adjustable Front Axle. Tractor 532, 4410 with Power Steering and Non Adjustable Front Axle. 1" X 16 RH Thread, Length 34.125 Center to End. TRACTOR 4000 1965> with Power Steering and Non Adjustable Front Axle. Replaces OEM part number 81812358. (Item #: 125318, Ref: C5NN3308F) $189.00

Drag Link End, LH - A= 36.44 inches, B= 1.00 inch, .813 inch diameter, 16 UN RH thread. For tractor models (600, 800 serial number 78836 and up), (2000, 4000, all 4 cylinder serial number 78836 and up). Replaces 310083. (Item #: 104580, Ref: 312871) $170.00

Drag Link End, Rear - A= 40.00 inches long. For tractor models (4000 from 4/1970 to 1975 with manual steering), 4100, (4600 from 8/1970 to 12/1971 with power steering and from 1975 to 1981 with manual steering), (4610 1981 with manual steering). Replaces 81821968. Due to the length of this part, $22 addtional shipping is required. This will be added to the shipping total of your order. (Item #: 104611, Ref: C7NN3307A) $47.80

Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Item #: 100670, Ref: NAA33271A) $12.70

Drag Link End, Rear, RH - A= 32.00 inches, B= 1.0 inch with 1.0 inch threads. For tractor models: 3000, 335, 3400, (4000 1965 and up), 4410, 532. (Item #: 104592, Ref: C5NN3307H) $269.00

Drag Link End, RH - A= 34.25 inches, B= 1.00 inch, .813 inch diameter, 16 UN right hand thread. For tractor models (2000, 4000 all 4 cylinders serial number 78836 and up), (600, 601, 800, 801 serial number 78836 and up). Replaces 310082. (Item #: 104579, Ref: 312870) $201.00

Drag Link Tube - 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Item #: 104582, Ref: C5NN3349A) $31.00

Drag Link Tube - LH - Drag Link Tube is right hand. Tube measures 38.5 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch-18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178572, Ref: NAA33315A) $51.00

Drag Link Tube - RH - Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178571, Ref: NAA3314B) $57.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Item #: 111126, Ref: AE33538A) $12.60

Front Axle Assembly with Bushing - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57/PS 55), 4000 (with Manual 7-57/PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. (Item #: 112019, Ref: D9NN3010EA) $190.00

Front Axle Bracket Bushing - This Front Axle Bracket Bushing is used with C5NN3N050B Front Axle Bracket. It replaces C5NN3N052A, 81802773 (Item #: 153973, Ref: C5NN3N052A) $8.10

Front Axle Bracket - Less Bushing - Fits 3230, 3430, 3930, 4000 (1965 and newer), 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030. Bushing part number C5NN3N052A is available separately. (Item #: 125388, Ref: C5NN3N050B) $116.00

Front Axle Support - For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 4000, 4000SU, 4110, 4110LCG, 4140. Replaces 81802769, C5NN3A42G, C5NN3A042G. Verify OEM number before ordering. (Item #: 153959, Ref: C5NN3A042G) $381.00

Front Axle Support Bushing - For Ford tractor models 3230, 3430, 3930, 4000, 4100, 4130, 4330, 4340, 4600, 4610, 4630, 4830, 5030, Replaces Ford OEM number C5NN3A443A, 81802938, Length: 1.26" (32mm), I.D.: 1.63" (41.7mm), Wall Thickness: .07" (1.7mm), (Item #: 146706) $7.40

Front Axle, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 4000, 4110, 4140 (all 7/31/70-earlier), Replaces Ford OEM number C5NN3010D, 86580572, Has holes for radius rods, For a new version of this item use Item #: 115474, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415474) $134.01

Front Socket - Drag Link End, front, 9.00 inch to center of post for drag link. 7/8 diameter, used with manual or power steering. Tractors: 3430, 3930, 4000 (1965 to 1975), 4130, 4600 (1975 to 1981), 4830, 5030 (with manual steering, 4/1970 and up). Replaces C5NN3A300A, 81825595, 83980679. (Item #: 100675, Ref: D0NN3A300A) $23.20

King Pin Repair Kit - This kit will repair both spindles. Kit contains 2 of each of the following 2N3109 spindle bushing, NCA3110A spindle bushing, C0NN3123B thrust bearing, C5NN3125A spindle seal. For tractor models 600, 800, 601, 801, (700, 900, 701, 901, 2000, 4000 all rowcrop with wide front end except hi-clearance). Tractors 1955-1965 4-cylinder tractors. (Item #: 104570, Ref: S.65107) $31.00

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $10.90

Manual and Power Steering Gear Assembly - This Steering Gear Assembly fits tractors: With manual steering 1965-8/1970. Will work for power steering on those models with an external power steering cylinder from the steering box and other fittings may need to be purchased which we do not carry. Fits Industrials: 3500, 3550, (420 with power steering) Also replaces OEM number D7NN3503C. (Item #: 169125, Ref: E0NN3503CA) $509.00

O-Ring - O-Ring. For Power Steering Valve Assembly. 2000, 3000, 4000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU 1/1981-9/1984, 3400, 231, 335, 531, 532 Replaces 87150S94, 1751687M1. (Item #: 178148, Ref: 87150S94) $1.70

$Ford 4000 Pitman Arm (LH\RH)$
Pitman Arm (LH/RH) - Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Item #: 116149, Ref: 86542743) $87.00

No
Picture
Planetary Gear - For Ford tractor models 2310, 2810, 2910, 3055, 3230, 3430, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 575E, 655, 655A, 655C, 655D, 675D, 675E Replaces Ford OEM number 86584272, 81803330, , Compatible with New Holland tractor models TV140, TV145, TV6070, Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B110B, LB75, LB75B, LB90, LB90B, LB110, LB110B, Replaces New Holland OEM number 86584272, (Item #: 176413) $102.00

Power Steering Ball Joint - Cylinder end with 7/16 inch internal threads. For OEM and Tisco power steering cylinders E2NN3A5AOBA with 1/2 inch diameter rod and D4NN3A54OA with 5/8 inch diameter rod. For models: 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 4600, 530A. (Item #: 104710, Ref: C5NN3A302B) $15.00

Power Steering Ball Joint Male - This Power Steering Ball Joint end measures 2.125 inches from the end of the threads to the center of the knuckle, and 5/8 diameter threads with 18 threads per inch. Cylinder end. For tractor models 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Item #: 161148, Ref: E2NN3A540BJ) $20.30

Power Steering Conversion Kit - Contains all parts necessary to convert manual steering to power steering. Does not work on tractors with a Loader. For the following 3 cylinder Models: 4000 and 4600 (except SU and Rowcrop). Kit contains mounting flange, power steering cylinder, long rod, hydraulic pump, oil tank, pressure tube, inlet hose, emptying tube, 2 tie rod ends, steering arm, hardware. (Item #: 104049, Ref: PSKF2) $527.00

Power Steering Conversion Kit - This kit contains all parts needed to convert manual steering on some FORD 4000 with straight front axle and 4600 tractors to power steering. NOTE: Not recommended for applications with front end loaders. For tractor models 4000 (1965 YEAR> 3 CYLINDER TRACTORS, 4600. (Item #: 104049, Ref: FD100) $527.00

Power Steering Cylinder - Power Steering Cylinder with 5/8 inch diameter rod, 1/2 inch diameter threaded outer end. For 335, 3400, 4110, 532, 2000 Industrial, 4000 Industrial. Uses CAPN3300A Rod end. Replaces, C5NN3A739G, C5NN3C578B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 127590, Ref: C5NN3A739G) $251.00

Power Steering Cylinder - Power Steering Cylinder is 14 1/4 inches long with 1/2 inch diameter rod, 7/16 inch diameter threaded outer end. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 530A, 531, 601, 801 and others. Comes with cylinder end ball joint E2NN3A540BJ. Rod end ball joint for 1965 and later sold separately as part number C5NN3A302B. Rod side ball joint for 1964 and earlier is not available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Replaces E2NN3A540A, E2NN3A540BA, E2NN3D547AA, 83955791. (Item #: 121884, Ref: E2NN3A540BA) $213.00

Power Steering Cylinder - This Power Steering Cylinder has 5/8 inch diameter rod, 7/16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Rod end ball joint sold separately as part number C5NN3A302B. Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Item #: 121885, Ref: D4NN3A540A) $225.00

$Ford 4000 Power Steering Cylinder - 1\2$
Power Steering Cylinder - 1/2 - For Ford tractor models 601, 611, 621, 631, 641, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 2110, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610, 4610SU, Compatible with Ford Construction and industrial models 230A, 231, 234, 334, 335, 530A, 531, 532, Replaces Ford OEM number E4NN3A547AA, E4NN3A540AA, Rod Diameter: 1/2", Thread: 7/16", 1/4" JIC Male Fittings, For use as left hand or right hand side, Do not mix rod sizes on tractor, For Tie Rod End use Item #: 104710, (Item #: 118803) $260.00

Power Steering Cylinder Ball End - This Power Steering Cylinder end is used with C5NN3A739G. It fits a cylinder rod with 0.500 inch number 20 fine thread. (Item #: 104712, Ref: CAPN3300A) $19.60

No
Picture
Power Steering Cylinder Pin - For Ford tractor models 2000, 3000, 3600, 3610, 4000, 5000, (Item #: 176325) $30.20

Power Steering Cylinder Repair Kit - This Power Steering Cylinder Repair Kit fits Ford Steering Cylinders with .625 inch rod, includes seals, piston and retainer. (Item #: 178078, Ref: CAPN3301A) $31.00

Power Steering Cylinder Seal Kit - For original equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. Replaces 87045114, CAPN3301B. Note, this kit may arrive with more parts than shown. These other parts are used on non-tractor applications and can be disregarded. (Item #: 155447, Ref: CAPN3301B) $21.90

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit is used on C5NN3N500C and C5NN3N500D cylnders. It contains: 86629540, C5NN3N509A, C5NN3B543A, 2 - 87149S94, C5NN3N548A, 87037S94 (C5NN3N558A), C5NN3N574A, 511836, 9849109 (Item #: 169538, Ref: CFPN3301C) $49.00

Power Steering Cylinder Shaft - Replacement power steering cylinder 1/2 inch rod for E2NN3A540BA after market replacement cylinders. (Item #: 179251, Ref: ALX3008) $103.45

Power Steering Filter Kit - Power Steering Filter - Power Steering Filter for Pump Reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 Replaces 81818748, 84536381, 83936985, 83923728, EDPN3K758A, E0NN3K58AA, E0NN3K758AA, EDPN3K58A, K964924, K964931, K964954, 1004, CR1004, CR665, 665, 84419022, K262979, K964954. (Item #: 113433, Ref: EDPN3K758A) $11.20

Power Steering Hose - Single Wire, Braid Hose Assembly with fittings, overall length 30 inches, 90 degree ends, 7/16 x 24 threads. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 600, 700, 800, 900. Replaces N10116, C0NN3C770A, C0NN3C769A, C0NN3A717B, C0NN3A714B, A45A1. (Item #: 178183, Ref: FPH30) $33.00

Power Steering Hose Assembly - Flexible Power Steering Hose designed to replace rigid Ford tube assemblies. 54 inches long, 3/8 inch inside diameter. SAE 100 R1A single wire braid hose with 5/8 inch-18 thread, straight SAE flare female swivel on one end, 5/8 inch-18 thread SAE straight inverted flare on other. For tractor models 2000, 2600, 3000, 3500, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. Can replace tube assemblies C5NN3A562C, C7NN3A562C, C5NN3A541A, C7NN3A541A, C7NN3A541B, D0NN3A562A. (Item #: 178207, Ref: FPH54) $60.00

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $522.48

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $2.20

Power Steering Pump - For tractor models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Output capacity is 1250 PSI, 4.2 gallons at 1000 RPM. Also replaces 81816585. (Item #: 114294, Ref: C7NN3A674F) $381.00

Power Steering Pump - For (2000, 3000, 4000, 4500, 5000 all 1965-1974) (3055, 4140 all 1970-1974) (3150 1970- 11/1975) (3500 1965-1971) (7000 10/1971-1974). Power Steering Pump. (Item #: 157724, Ref: D8NN3K514KC) $868.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $182.80

No
Picture
Power Steering Pump - For Ford tractor models 4000 (1965-later w/ 3 cly. engine and straight axle), 4600 (all 3 cylinder), Replacement pump for power steering conversion kit, (Item #: 168052) $269.00

Power Steering Pump, Belt Driven - This Power Steering Pump is for models 600, 800, 601, 801, 2000, 4000, 701, 901. Gas and Diesel. Replaces C3NN3A691B. Includes mounting bracket, belt and replacement pressure hose. Verify part number if possible as there were more than one type during production runs. (Item #: 111004, Ref: S.60189) $802.48

Power Steering Pump, Belt Driven - Redesigned Pump uses a bearing instead of original bushing. Can be adapted to tractors using Char-Lynn Power Steering with Eaton Pump. Does not include brackets, top mounted reservoir or pulley. Shaft diameter measures .670 inches and the shaft length (where pulley mounts) measures .575 inches. There is a 2 inch thick pump housing (where bracket bolts to). SOME FORD APPLICATIONS WILL REQUIRE A NEW PRESSURE HOSE TO BE MADE FOR 3/8 inch MALE INVERTED FLARE. Pressure is preset at 1.32 GPM. For tractor models (2000, 4000 4 Cylinder), 601, 701, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140 1958 to 1964. For tractors with canister on top pump, (700, 740, 900, 950, 960 1955 and UP for tractors with canister on top pump). Replaces: C0NN3A674H and C3NN3A674C. Can be used with ABC1417 or EBJ33556A Pulley. (Item #: 113730, Ref: S03-1003) $417.87

Power Steering Pump Bracket - This Power Steering Pump Mounting Bracket is for pump part number S.60189 for the following models: 600, 601, 701, 800, 801, 901, 2000, 4000. (Item #: 179359, Ref: S.60157) $105.00

Power Steering Pump - C7NN3A674G - For Ford tractor models 4000 (1/65-12/74), 4200 (1/65-12/74), 5000 (1/65-1/75), 5200 (1/67-12/74), 7000 (10/71-12/74), 7200 (10/71-12/74), Replaces Ford OEM number C7NN3A674G, C5NN3A674G, 81851286, 3.5 GPM, 1100 PSI at 1000 RPM, Used in systems with separate reservoir, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157697) $641.00

Power Steering Pump - Dynamatic - For Ford tractor models 3000 (1/65-12/74), 3400 (1/65-9/75), 4000 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 5200 (1/67-12/74), 7200 (10/71-12/74), Compatible with Ford Construction and industrial models 3500 (1/65-12/74), 4500 (1/65-12/74), Replaces Ford OEM number C7NN3A674E, 81816584, C5NN3A674C, 4.2 GPM, 1100 PSI at 1000 RPM, Used in systems with separate reservoir, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157810) $650.00

Power Steering Pump - E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600, 5700, 6600, 6600 (O), 6600, 6700, 7000, 7100, 7200, 7600, 7600, 7700, For Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, Replaces Ford OEM number E6NN3K514CA, 83959550, 850 PSI at 1000 RPM, 2.74 GPM, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $307.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $11.20

Power Steering Pump Repair Kit - This Seal and O-Ring Kit is for Power Steering Pumps with External Reservoirs. Fits; (2000, 3000, 4000 and 5000 1/1965-9/1968), (7000, 8000, 8600, 9000, 9600 1/1968-2/1973), Industrial; (3400, 3500, 4400, 4500 1/1965-4/1970), (2110LCG, 4110LCG 1965-9/1968). Contains: (2) D2NN3R542A O-Ring, (2) D2NN3R543A O-Ring, (2) E0NN3N529AA Seal, (1) E1ADKN994567 Seal, (2) 9861410 O-Ring, (1) 134373 O-Ring, (1) 9991976 O-Ring, (1) 379275S94 O-Ring, (1) 9617873 O-Ring. Replaces OEM part number DHPN3A674A. (Item #: 168490, Ref: DHPN3A674A) $56.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $12.60

No
Picture
Power Steering Pump, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number E6NN3K514DA, 83959532, Replaces Ford Casting nos C7NN3K514A, For a new version of this item use Item #: 170931, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457518) $291.01

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $15.50

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.70

Power Steering Seal Kit - For Ford tractor models 4000, 4100, 5000, 5100, 7000, 7100, Replaces Ford OEM number EDPN3500A, 83936975, (Item #: 158421) $15.90

Power Steering Shaft and Nut Assembly Before 1965 - For tractor models 601, 801, 2000, (4000 up to 1965). Power Steering Shaft and Nut Assembly. 23 7/8 inch overall length. (Item #: 161862, Ref: 310859) $189.00

Radius Rod Assembly - Right or left hand, measures 38 inches from Socket center to clevis hole center. For tractor models (2600, 3600, 3900, 4600SU, 4100 all 1/1975 and up L/cab with power steering), (2610, 2910, 3610, 3910, 4610SU all 1-1981 to 9/1984 L/cab with power steering), (2000, 2100, 2110, 3000, 3100, 4000, 4110, 4140 all 8/1970 and up with power steering). Replaces 81822714, 87764155, C7NN3A292B, D2NN3A292A, 82847577. (Item #: 164110, Ref: C7NN3405B) $145.00

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Item #: 115083, Ref: E0NN3N442BA) $17.40

Radius Rod Ball Spacer, Used - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4030, 4100, 4110, 4120, 4121, 4130, 4131, 4410, 4600SU, 4610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 531, 532, 540, 541, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4140, Replaces Ford OEM number E0NN3N442BA, For a new version of this item use Item #: 115083, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459476) $10.92

Radius Rod Cap, Used - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 501, 600, 700, 2000, 2100, 2110, 2120, 2130, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3300, 3400, 3600, 3610, 3900, 3910, 4000, 4030, 4100, 4110, 4120, 4130, 4600, 4610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 1801, 1811, 1821, 1841, 1871, 1881, 4140, Compatible with Ford Baler(s) 530, Replaces Ford OEM number E0NN3N406BA, 313319, 83924040, 8N3440B, 957E3440A, 957E3440B, C7NN3N406A, For a new version of this item use Item #: 108088, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435389) $6.48

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Item #: 108088, Ref: E0NN3N406BA) $10.80

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Rocker Shaft - For Ford tractor models Major, Power Major, Super Major, 2310, 2610, 2910, 3500, 3610, 3910, 4000, 4110, 4400, 4500, 4600, 4610, Compatible with Ford Construction and industrial models 233, 334, 335, 420, 535, Replaces Ford OEM number C9NN3575C, Replaces New Holland OEM number 81822292, (Item #: 161600) $178.00

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.10

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109) $4.00

No
Picture
Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Measures 1.352 inch inside diameter, 1.474 inch outside diameter and 1.490 inch length. Also replaces 81717392, 83928345 and 957E3110B. (Item #: 100632, Ref: NCA3110A) $4.40

Spindle Bushing - Used on multiple Ford Tractors. It measures 1.6 inches outside diameter, 1.5 inches inside diameter and is 1.5 inches long. It replaces original part number C5NN3110B and 81802798. (Item #: 100628, Ref: C5NN3110B) $4.20

Spindle Bushing, Bearing and Seal Kit - Contains 2 2N3109 (1 1/4 inch X 1 3/8 inch X 1 1/2 inch) Bushing, 2 C5NN3110B (1 1/2 inch X 1 5/8 inch X 1 1/2 inch) Bushing, 2 C5NN3A299A (1 1/2 inch ID X 2 1/4 inch outside diameter), Thrust Bearings, 2 C5NN3125A (1 1/8 inch X 1 5/8 inch X 1/4 inch) Dust Seal. (Item #: 104567, Ref: SBBSKIT04) $34.00

Spindle Bushing Kit - Spindle Bushing Kit contains: 2 upper bushings part number 2N3109 and 2 lower bushings part number NCA3110A. For tractor models 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 900, Dexta, Super Dexta. (Item #: 182515, Ref: SBK5364) $26.20

Spindle - Left Hand - For Ford tractor models 2000, 4000 (All Orchard), Compatible with Ford Construction and industrial models 231, 531 (All Orchard), Replaces Ford OEM number F2NN3106CA, Dimension A: 7.687", Dimension B: 1.246", Dimension C: 1.339", Dimension D: 1.250", Dimension E: .750", Left Side, (Item #: 104529) $185.00

Spindle - Left Hand, Used - For Ford tractor models 600, 700, 800, 900, 2000, 4000 (all 1955-64), Replaces Ford OEM number NCA3106B, F2NN3106BA, Left Side, Dimension A: 10.687", Dimension B: 1.250", Dimension C: 1.340", Dimension D: 1.250", Dimension E: .750", For a new version of this item use Item #: 100622, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400622) $33.01

Spindle, LH - This spindle has a vertical Shaft measuring 12.125 inches in length and has a top diameter of 1.244 inches and a bottom diameter of 1.465 inches. For model 4000. The wheel bearing kit used for this spindle is part number EHPN1200C. (Item #: 100634, Ref: C5NN3106N) $59.00

Spindle, LH - Left Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (Wheel Bearing Kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100622, Ref: NCA3106B) $49.98

Spindle, LH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104539, Ref: C5NN3106E) $299.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle, RH - Right Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (wheel bearing kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100621, Ref: NCA3105B) $44.98

Spindle, RH - This spindle measures A= 9.812 inches, B= 1.50 inches, C= 1.937 inches, D= 1.794 inches, E= 1.124 inches. For tractor models 3000, 335, 3400, 3600, 4000, 4100, 4410, 4600, 532. Replaces F2NN3105AA. The wheel bearing kit used for this spindle is part number WBKFD7. (Item #: 104538, Ref: C5NN3105F) $270.00

Spindle - Right Hand - For Ford tractor models 2000, 4000 (All Orchard), Compatible with Ford Construction and industrial models 231, 531 (All Orchard), Replaces Ford OEM number F2NN3105CA, Dimension A: 7.687", Dimension B: 1.246", Dimension C: 1.339", Dimension D: 1.250", Dimension E: .750", Right Side, (Item #: 104528) $212.00

Spindle, Right Hand - This spindle has a vertical Shaft that measures 12.125 inches in length with a top diameter of 1.244inches and a bottom diameter of 1.465 inches. For 4000. The wheel bearing kit used for this spindle is part number EHPN1200C. (Item #: 100633, Ref: C5NN3105T) $66.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Item #: 100623, Ref: C0NN3123B) $5.00

Spindle Thrust Bearing - This spindle bearing is for models 2310, 2600, 2610, 2910, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4200, 4600, 4610, 4630 all replacing part numbers 81802806, and 81802871. Inside Diameter 1.496 inches. Outside Diameter 2.208 inches. Width 0.624 inches. (Item #: 100635, Ref: C5NN3A299A) $7.20

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Item #: 104731, Ref: 310799) $38.00

Steering Arm Dust Seal - For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Item #: 104572, Ref: 8N3528) $2.50

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

No
Picture
Steering Arm - Left Hand - For Ford tractor models 4000, 4100, 4330, 4340, Replaces Ford OEM number 86531373, D2NN3131A, Spindle Shaft Diameter: 1.244", (Item #: 185117) $169.22

Steering Arm, LH - For tractor models 4000, 4100, 4330, 4340. (Item #: 104733, Ref: C5NN3131C) $179.00

No
Picture
Steering Box Assembly (Manual), Remanufactured, C3NN3503E - For Ford tractor models 600, 800, 2000, 4000 (all 4 cylinder), Replaces Ford OEM number C3NN3503E, Manual Steering Box Double Arm Style, For a New version of this sku use Item #: 158461, (Item #: 204463) $1158.01

Steering Box Drop Arm - This Steering Box Drop (Pitman) Arm is used on many Ford Agricultural and Industrial models built 1965 and later. It replaces original part numbers 81803156, C5NN3590F. Verify part numbers before ordering. (Item #: 165024, Ref: C5NN3590F) $39.00

Steering Column Bearing Kit - Used on manual steering column. Kit contains column spring, seat and bearing. Replaces Ford OEM Numbers 8N3520, 8N3517, 8N3518, C5NN3N716A. (Item #: 118504) $40.00

Steering Column Bearing Spring - This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Item #: 178087, Ref: 8N3520) $3.80

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $3.90

Steering Column Grommet - Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Item #: 118307, Ref: NCA3578A) $10.60

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Item #: 124493, Ref: 8N3570) $2.90

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Item #: 179603, Ref: 8N3595KIT) $23.70

Steering Column Spring Seat - For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Item #: 179692, Ref: 8N3518) $4.50

Steering Gear Assembly - Manual Steering Gear Assembly without arms. Fits 600, 601, 800, 801, (2000 and 4000 1955-1964). Does not fit row crops, high crops or offsets. Replace 311318, 8N3548B, NCA3575A (Item #: 185461, Ref: 8N3548B) $804.00

Steering Gear Assembly - For Ford tractor models 600, 601, 620, 630, 640, 650, 660, 800, 801, 820, 840, 850, 860, 2000, 4000, Replaces Ford OEM number C3NN3503E, Steering gear assembly with 2 drop down arms, For a Remanufactured version of this sku use Item #: 204463, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158461) $879.30

Steering Gear Pitman Arm, Used - For Ford tractor models NAA, 8N, 600, 700, 800, 900, 901, 2000, 4000 (all 1949 - 1964), Replaces Ford OEM number 86542743, NCA3590A, Left Hand or Right Hand, For a new version of this item use Item #: 116149, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416149) $50.40

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Rocker Shaft Oil Seal - Oil Seal, Inner for Rocker Shaft. For tractor models 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, Major, Super Major. (Item #: 161601, Ref: DDN3539) $9.10

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Item #: 178090, Ref: S.67109) $23.20

Steering Sector, Left Hand - Double Steering Sector [7 Teeth and 1 Double Tooth). Replaces OEM numbers 251294, C3NN3527A. For 4-Cylinder Fords Only [1950 to 1964]. (Item #: 111898, Ref: 251294) $207.14

Steering Sector, Left Hand - Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Item #: 114749, Ref: 251293) $219.00

Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125 inch I.D., 1.442 inch O.D. and 0.200 inch wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Item #: 124153, Ref: 8N3591B) $5.10

Steering Sector Shaft - For both Manual or Power Steering Applications Single Gear containing five teeth. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532, 3350. Replaces C5NN3N575A. (Item #: 116896, Ref: C7NN3N575A) $190.20

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft and Nut Assembly - Right hand spiral. For tractor models 3500, 3550, (4000 with manual steering all years with power steering from 1965-1970), 420, 515, 535. (Item #: 114040, Ref: D2NN3A710D) $111.00

Steering Shaft and Nut Assembly, Manual - Fits 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with Lower Bearing. (Item #: 114544, Ref: NCA3575A) $104.00

Steering Shaft Bearing - Bearing is for the upper and lower ends of the steering shaft. Verify measurements of .49 inches wide, 2.04 inches outside diameter and 1.18 inches inside diameter. For tractor models Major, Power Major, Super major. Replaces 353075S. (Item #: 169746, Ref: E1ADKN3556) $11.60

Steering Shaft Bearing - For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (1964-earlier), 2031, 2111, 2120, 2130, 2131, 4000 (1964-earlier), 4031, 4120, 4121, 4130, 4140, Replaces Ford OEM number 8N3571, Bearing Only, For Complete Bearing - Cup And Cone use Item #: 111857, (Item #: 179748) $13.50

Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 111857, Ref: 8N3571-OE) $12.50

Steering Shaft Bearing and Cup Assembly - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for one set. Two required for the listed models. Replaces 8N3571 and 8N3552. (Item #: 111857, Ref: 8N3505) $12.50

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Item #: 124501, Ref: 8N3517) $22.80

Steering Shaft Bearing Cup - This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 173338, Ref: 8N3552) $13.10

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with power or manual steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.20

Steering Shaft Bushing - For Ford tractor models 2310, 2600, 2610, 2910, 3000, 3230, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4330, 4340, 4400, 4500, 4600, 4610, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 233, 234, 333, 334, 335, 420, 515, 535, Replaces Ford OEM number E1ADKN3558, (Item #: 161602) $4.70

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12/1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. (Item #: 124154, Ref: 8N33581) $3.40

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $46.00

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.90

Steering Valve - For tractor models 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, except row crops. (Item #: 153841, Ref: 310863) $772.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

Steering Wheel - Steering Wheel OEM Style, 17-1/2 inch diameter, 11/16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Item #: 101421, Ref: 8N3600-OE) $26.00

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Steering Wheel Dome Nut Washer - With beveled edge. For tractor models 4000 (4 cylinder), 4030, 4040, 4121, 4130, 4140 (1948 THRU 1964). (Item #: 126719, Ref: 356515S) $3.90

Steering Wheel Nut - Steering Wheel Retaining Nut. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. 11/16 inch - 20 NF thread. Replaces 356130S8, 83906211, C5NN3N602A, D5NN3N602A. (Item #: 101426, Ref: D5NN3N602A) $6.10

Steering Wheel Nut - Black - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 359295S7, Black Finish, 11/16" - 20 Threads, (Item #: 111727, Ref: 351114CCBLACK) $6.60

Steering Wheel Nut, Chrome - Nut, Steering Wheel ACORN style. 11/16 inch-20. CHROME PLATED. For Ford 4 Cylinder Tractor Models, 1947-1964. (Item #: 101422, Ref: 351114CC) $7.00

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn Style Nut, 11/16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Item #: 176956, Ref: 351114S) $7.00

No
Picture
Thrust Block - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3910, 4000, 4110, Compatible with Ford Construction and industrial models 3500, 3550, Replaces Ford OEM number C5NN4194A, (Item #: 155040) $13.98

Tie Rod - A= 4.812 inches, B= 1.125 inches, 12 right hand thread. For tractor models (3000, 3500, 3550, 4000, 4500 all from 1/1965 and up), (5500, 5550 from 1/1967 and up), (650, 6500 from 1/1973 to 12/1977), (750, 7500, 755, 755A, 755B from 1/1973 and up), (535 from 1/1975 to 9/1978), (420 from 1/1975 and up). Replaces C7NN3289A, C5NN3289A, 81817084. (Item #: 104604, Ref: C7NN3289B) $49.00

Tie Rod Boot - For Ford tractor models 2000, 3000, 3400, 4000, 4030, 4121, 4130, 4410, 6000, Compatible with Ford Construction and industrial models 335, 340, 532, 1811, 1821, 1871, 1881, 2030, Compatible with International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, Super H, Super HV, Super MTA, 300, 350, 385, 400, 450, 454, 474, 484, 485, 544, 560, 574, 584, 656, 660, 666, 674, 684, 685, 686, 756, 766, 784, 786, 826, 856, 884, 885, 886, 966, 986, 1026, 1066, 1086, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3288, 3488, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Compatible with Massey Ferguson tractor models Super 90, TE20, TEA20, TO20, TO30, TO35, 20, 30, 35, 50, 65, 85, 88, 135, 150, 165, 175, 178, 180, 230, 235, 245, 255, 265, 275, 285, 1100, 1105, 1130, 1135, 1150, 1155, Compatible with Massey Ferguson Combine (s) 35, 300, 410, 510, 540, 550, 750, 760, 850, 855, 860, 865, 8560, 8570, 8780, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30B, 30D, 31, 40, 40B, 50, 50A, 70, 80, 99, 200, 202, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1885522M1, 196099M1, 3477526M1, Replaces Case IH OEM number 358900R1, 87538419, Bottom Dia.: 1.710:, Top Dia.: 1.070", Height: .920", Hole Dia.: .625", (Item #: 151981) $4.60

Tie Rod End - The Tie Rod End measures 4.875 inches from the end of the threads to the center of the knuckle with a diameter of the threaded end being 1 1/8 inch, 12 UNF Left Hand Threads. For models 3500, 3550, 420, 4500, 535, 5500, 5550, 6500, 750, 7500, 755, 3000, 4000. (Item #: 104425, Ref: C7NN3290A) $38.30

Tie Rod End - This Tie Rod End is 40.125 inches from center of ball joint to the end. It and an Inside Diameter of 0.875 inches. It is used on 4100 and 4200 3 cylinder tractors. Replaces C5NN3307M (Item #: 104608, Ref: C5NN3307M) $112.00

Tie Rod Outer - Tie Rod End, left hand, 19.00 inches by 3/4 inch diameter, for manual or power steering equipped tractors. Left hand and right hand 1965 to 5/1967; Left hand only 6 of 1967 to 1975. Tie Rod End for diesel and gas applications. For 4000, 4600, 4610. (Item #: 100677, Ref: C5NN3278A) $22.50

Tie Rod Outer - End, right hand outer, female, .750 inch-16 thread, 3.75 inch to center of post, for tie rod with manual or power steering. For 3430, 3930, 4000, 4000 US Built, 4100, 4130, 4600, 4610, 4630, 4830, 5030. Replaces C5NN3289C, 81815989, 1815989 (Item #: 100676, Ref: C5NN3289C) $19.30

Tie Rod Shaft - This Tie rod shaft is right side. 0.740 inch diameter, with 7 notches, 19 inches long. Tractors: 3430, 3930, 4000, 4130, 4610, 4630, 4830, 5030 (Item #: 104609, Ref: C5NN3282E) $44.90

Wheels

No
Picture
11" x 28" Spin Out Rear Rim, Off-White - For Ford tractor models NAA, 541, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number NDB1020B, Width: 11", Diameter: 28", Type: Spin Out, Rim Color: Off-White, (Item #: 158482) $850.00

12" x 28" 6 Loop Rear Rim, Used - For Ford tractor models NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4600, 4610, 4630, 4830, 5030, 5600, 5700, 6600, 6700, 7600, 7700, Compatible with Ford Construction and industrial models 233, 234, 334, 335, 340, 420, 445, 515, 530, 531, 532, 535, 540, 541, 545, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 4040, 4140, Replaces Rims, Wheels, Tires OEM number C7NN1050N, 31319712G, 99A502, D4NN1050B, D9NN1050EA, RW12286, TR1228, Rim Width: 12", Rim Diameter: 28", Type: 6 Loop, 12X28, May Fit More Applications Than Listed, For a new version of this item use Item #: 103720, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403720) $99.01

No
Picture
15" x 30" 8 Loop Rear Rim, Silver Mist - For Ford tractor models 2310, 2600, 2610, 2910, 3000, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5190, 5200, 5600, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 420, 515, 530, 532, 535, Replaces Ford OEM number C5NN1100AE, D2NN1150L, D9NN1036GA, D9NN1050GA, Width: 15", Diameter: 30", Type: 8 Loop, Bolt Circle of Loops: 24.25", From Centerline to inside of Loop: 2.062", From Centerline to outside of Loop: 3.625", Valve stem side: 1, Rim Thickness: .187", Rim Color: Silver Mist, (Item #: 110436) $426.00

No
Picture
4" X 19" Front Rim, 6 Bolt - For Ford tractor models NAA, 2N, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 681, 700, 740, 771, 800, 821, 851, 861, 871, 901, 950, 960, 981, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4110, 4120, 4131, Replaces Ford OEM number C5NN1015A, Width: 4", Diameter: 19", Bolts: 6, Bolt Hole Diameter: 6", Pilot Hole: 4.625", (Item #: 174109) $82.00

Bolt. Front Wheel - This bolt is the Hub to Rim Bolt. Measures 1 5/8 inches x 20 UNF threads, .6 inch shoulder diameter, 1.346 inch usable length, 1.545 inch overall length. For 2000, 2N, 3000, 4000, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Replaces 81816078, C5NN1107B, C5NN1107D, C5NN1107E, 78-1107 and 781107. Uses nut part number C5NN1012B. (Item #: 154744, Ref: C5NN1107E) $3.70

Ford Front Wheel Bearing Kit - Front Wheel Bearing Kit. Kit Contains one each: LM48548 (Cone), LM48510 (Cup), LM11949 (Cone), LM11910 (Cup), 310195 (Seal). Repairs one wheel. For tractor models 4000, 4600, 4610. Fits hub C9NN1104E. (Item #: 100655, Ref: EHPN1200C) $18.20

$Ford 4000 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $63.00

Front Hub Kit - Used on many Ford models, 1955 and later, this Front Hub Kit contains 1 of 957E1139 dust cap, 1 of EHPN1200C wheel bearing kit, 6 of C5NN1012B wheel nuts, 6 of C5NN1107F wheel studs, and 1 of C9NN1104E hub. Verify part numbers. Many of the models listed used more than one front hup configuration. Ford 2000, 2100, 2120, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3055, 3230, 334, 335, 3600, 3610, 3610V, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4410SU, 4600, 4600NO, 4600O, 4600SU, 4610, 4610N, 4610NO, 4610O, 4610SU, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 5030, 600, 601, 800, 801 (Item #: 113373, Ref: C9NN1104EKIT) $83.00

No
Picture
Front Hub Oil Seal - For Ford tractor models 501, 611, 620, 621, 631, 641, 651, 2000, 2111, 2120, 2310, 2610, 2810, 2910, 3230, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4600, 4600SU, 4610, 4630, 4830, 5030 Replaces Ford OEM number 310195, 81809444, , Compatible with John Deere tractor models 1830, Replaces manufacturer number VPJ1410, Inside Diameter: 1.811", Outside Diameter: 2.638", Width: .433", (Item #: 173786) $5.50

Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $142.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $118.00

Front Rim - Heavy Duty - Front Rim with weight holes. 5.5 inch x 16 inch, 3300 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot. For 7.5 inch x 16 inch tires. Additional $25 shipping due to size and weight. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Front Wheel Bearing Kit - Kit Contains one each: LM67048 inner cone 1.250 in id, LM67010 outer cup 2.328 in od, LM11949 outer cone .750 in id, LM11910 outer cup 1.781 in od, NCA1190A seal 1.875 in id and 2.695 in od. For tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1955-1964 with serial number 137817 and up. Repairs one wheel. For hubs C9NN1104F, NCA1104B, NCA1106B. Verify part numbers or sizes as these models had more than 1 different front end. (Item #: 100653, Ref: CBPN1200C) $16.00

Front Wheel Bearing Kit - Front Wheel Bearing. For tractor models 230, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4600SU, 4610, 4610N, 4610SU, 4630, 4630N, 4830, 5030, 530, 530A, 532. Fits hub C9NN1104E. Contains one each: Bearing LM48548-BP, Cup LM48510-BP, Bearing LM11949-BP, Cup LM11910-BP, Seal 310195. FW94WS (Item #: 100655, Ref: EHPN1200C) $18.20

No
Picture
Front Wheel Bushing - For tractor models 1801, 50C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 4000, 4040, 4140, 420, 4410, 445, 445A, 445C, 450, 4500, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6810, 7610. (Item #: 153562, Ref: TDBA3110A) $7.20

Front Wheel Cap - For 8N, 9N, 2N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 all 1939 to 1964. Front Wheel Cap. (Item #: 183735, Ref: 2N1139B) $6.10

Front Wheel Hub - For Ford tractor models 600, 800, 2100, 2310, 2610, 2810, 2910, 3055, 3230, 3610, 3910, 4000, 4100, 4130, 4410, 4600, 4610, Replaces Ford OEM number C9NN1104E, 6 Bolt, Uses threaded dust cap, For hub cap use Item #: 100661, (Item #: 100660) $52.00

Front Wheel Hub, Used - For Ford tractor models NAA, 8N, 501 (s/n 137818-earlier), 541 (s/n 137818-earlier), 600 (s/n 137818-earlier), 601 (s/n 137818-earlier), 611 (s/n 137818-earlier), 620 (s/n 137818-earlier), 621 (s/n 137818-earlier), 630 (s/n 137818-earlier), 631 (s/n 137818-earlier), 640 (s/n 137818-earlier), 641 (s/n 137818-earlier), 650 (s/n 137818-earlier), 651 (s/n 137818-earlier), 660 (s/n 137818-earlier), 661 (s/n 137818-earlier), 671 (s/n 137818-earlier), 681 (s/n 137818-earlier), 700 (s/n 137818-earlier), 701 (s/n 137818-earlier), 740 (s/n 137818-earlier), 741 (s/n 137818-earlier), 771 (s/n 137818-earlier), 800 (s/n 137818-earlier), 801 (s/n 137818-earlier), 811 (s/n 137818-earlier), 820 (s/n 137818-earlier), 821 (s/n 137818-earlier), 840 (s/n 137818-earlier), 841 (s/n 137818-earlier), 850 (s/n 137818-earlier), 851 (s/n 137818-earlier), 860 (s/n 137818-earlier), 861 (s/n 137818-earlier), 871 (s/n 137818-earlier), 881 (s/n 137818-earlier), 900 (s/n 137818-earlier), 901 (s/n 137818-earlier), 941 (s/n 137818-earlier), 950 (s/n 137818-earlier), 951 (s/n 137818-earlier), 960 (s/n 137818-earlier), 961 (s/n 137818-earlier), 971 (s/n 137818-earlier), 981 (s/n 137818-earlier), 2000 (s/n 137818-earlier), 2031 (s/n 137818-earlier), 2110 (s/n 137818-earlier), 2111 (s/n 137818-earlier), 2120 (s/n 137818-earlier), 2131 (s/n 137818-earlier), 4000 (s/n 137818-earlier), 4031 (s/n 137818-earlier), 4110 (s/n 137818-earlier), 4120 (s/n 137818-earlier), 4131 (s/n 137818-earlier), Replaces Ford OEM number 86511582, 8N1104, D5NN1104A, Use 111238 if smaller inner race is needed, For a new version of this item use Item #: 104754, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404754) $22.51

Front Wheel Hub without Studs - For Ford tractor models NAA, 8N, 501 (s/n 137818-earlier), 541 (s/n 137818-earlier), 600 (s/n 137818-earlier), 601 (s/n 137818-earlier), 611 (s/n 137818-earlier), 620 (s/n 137818-earlier), 621 (s/n 137818-earlier), 630 (s/n 137818-earlier), 631 (s/n 137818-earlier), 640 (s/n 137818-earlier), 641 (s/n 137818-earlier), 650 (s/n 137818-earlier), 651 (s/n 137818-earlier), 660 (s/n 137818-earlier), 661 (s/n 137818-earlier), 671 (s/n 137818-earlier), 681 (s/n 137818-earlier), 700 (s/n 137818-earlier), 701 (s/n 137818-earlier), 740 (s/n 137818-earlier), 741 (s/n 137818-earlier), 771 (s/n 137818-earlier), 800 (s/n 137818-earlier), 801 (s/n 137818-earlier), 811 (s/n 137818-earlier), 820 (s/n 137818-earlier), 821 (s/n 137818-earlier), 840 (s/n 137818-earlier), 841 (s/n 137818-earlier), 850 (s/n 137818-earlier), 851 (s/n 137818-earlier), 860 (s/n 137818-earlier), 861 (s/n 137818-earlier), 871 (s/n 137818-earlier), 881 (s/n 137818-earlier), 900 (s/n 137818-earlier), 901 (s/n 137818-earlier), 941 (s/n 137818-earlier), 950 (s/n 137818-earlier), 951 (s/n 137818-earlier), 960 (s/n 137818-earlier), 961 (s/n 137818-earlier), 971 (s/n 137818-earlier), 981 (s/n 137818-earlier), 2000 (s/n 137818-earlier), 2031 (s/n 137818-earlier), 2110 (s/n 137818-earlier), 2111 (s/n 137818-earlier), 2120 (s/n 137818-earlier), 2131 (s/n 137818-earlier), 4000 (s/n 137818-earlier), 4031 (s/n 137818-earlier), 4110 (s/n 137818-earlier), 4120 (s/n 137818-earlier), 4131 (s/n 137818-earlier), Replaces Ford OEM number 86511582, 8N1104, D5NN1104A, NCA1104C, Use 111238 if smaller inner race is needed, (Item #: 104754) $38.50

Front Wheel Nut - These Front Wheel Nuts are 1/2 inch-20. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000. Replaces C5NN1012B, E1ADKN1012. (Item #: 108607, Ref: C5NN1012B) $0.70

Front Wheel Rim - 4.50 inch x 16 inch, 6 bolt hub, 6.0 inch bolt circle, 4.625 inch pilot hole, fits 5.50 inch or 6.00 inch x 16 inch tire. For tractor models Dexta, NAA, Super Dexta, 8N, 600, 700, 800, 900, 2000, 3000, 4000. 957E1015D. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $60.00

Front Wheel Seal - For tractor models 2000, 3000, 2300, 231, 2600, (2610 1976-1981 without cab), (3000 1965-1975), 3300, 3600, 3610, 3900, (3910 1981), 4000, 4100, (4110 1981), 531, Dexta, Super Dexta (Item #: 112120, Ref: 957E1190A) $4.30

Front Wheel Stud Bolt - Front Wheel Stud Bolt measures 1/2 inch X 2 inch. WITHOUT nuts. Note: nuts are available by ordering part number C5NN1012B. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 108606, Ref: C5NN1107F) $1.55

Hub Cap -with hole for grease fitting - For tractor models 2000, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, Dexta, Super Dexta. (Item #: 100661, Ref: 957E1139) $6.30

Hub Front - This Front Hub comes with 6 studs, 6 nuts and Hub Cap (not shown). For tractor models 2000, 230, 230A, 2310, 234, 2600, 2610, 2610V, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4610, 4610N, 4630, 4630N, 4830, 4830N, 5030, 530, 530A, 601, 801, Dexta, Super Dexta. Replaces C9NN1104D, C9NN1104E, 81823161. It is important to verify OEM numbers. Many of the models listed used more than one hub. Uses EHPN1200C wheel bearing set. (Item #: 184919, Ref: C9NN1104E) $75.60

Hub, Front Wheel - Tractors: 601, 701, 801, 901, for 6 hole 4.50 inch X 16 inch wheel (1957 to 1964); for 6 hole 4.00 inch X 16 inch wheel. Tractors 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000 (1965 to 1975), 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3550, 3600, 3900, 3910, 4000, 4100, 4110, 4140, (1975 to 1981), 2610 (1981 and up), 231, 233, 333, 531, 3610, 4600, 4610 (with 2.32 inches Inner Bearing Bore). Uses bearing and seal kit FW93WS; wheel bolt C5NN1107F and nut C5NN1012B. Replaces 95731110, C5NN1104B. (Item #: 100659, Ref: C9NN1104F) $69.00

Lug Nut, Rear Wheel - 5/8-18 (UNF) Thread. Uses a 1 1/16 inch wrench. Replaces C5NN1120F, 8N1134, 881162M2. (Item #: 109991, Ref: 8N1134) $1.90

Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H) $3.80

Rear Rim - This rear rim is six loop, 10 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 900, 2000, 4000, Dexta, Super Dexta and others by size. Replaces NCA1020B. (Item #: 103719, Ref: NCA1020B) $143.00

Rear Rim - This Six loop rim is 12 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900, 2000, 3000, 4000. Replaces D4NN1050B, D9NN1050EA, 31319712G, 99A502 (Item #: 103720, Ref: R2068) $150.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $23.50

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $17.80

Rear Wheel Bolt - This Rear Wheel Bolt is used from rear axle to center disc. 5/8 inch-18 thread (UNF) x 2-3/16 inch Use with nut 8N1134. Used on tractors 1965 and later. Verify measurements and part numbers before ordering. Replaces C5NN1117D, C5NN1117K, C5NN1117R, VPH6506, VPH6534, 184272M1, 81815835, 893017M1, 98A625 (Item #: 108655, Ref: C5NN1117R) $2.88

Rear Wheel Center - This disc is used on multiple Ford models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces Ford OEM numbers D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B. Additional $35 shipping due to weight. (Item #: 149804, Ref: D9NN1036CA) $225.00

Rear Wheel Flange Nut - For Ford tractor models 501, 600, 700, 800, 900, 2000, 3000, 4000 (all '48 - '64), Replaces Ford OEM number 8N1132A2, Sold each, 1-1/16" Hex, 2.65" Overall length, 5/8" UNF Thread, (Item #: 116012) $15.00

Rim Stop Screw - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9600, 9700, Compatible with Ford Construction and industrial models 256V, 276, Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 81811263, C0NN1058A, Screw for stop body, Use with power adjust rims PAR10X28, C5NN1050J, and C5NN1050H, Rear rim stop screw, (Item #: 151948) $6.80

Seal, Front Wheel Hub - Front Wheel Hub Dust Seal. 2 11/16 inch outside diameter, 2 inches inside diameter. Fits: 2000 1955-1964 USA BUILT, 2N 1939-1947, 4000 1955-1964 USA BUILT, 600 1955-1964 USA BUILT, 700 1955-1964 USA BUILT, 800 1955-1964 USA BUILT, 8N 1948-1952, 900 1955-1964 USA BUILT, 9N, NAA 1953-1954. Price shown is for each. Can replace 9N1190B. (Item #: 113706, Ref: NCA1190A) $3.50

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.516 inch outside diameter, 0.78 inch inside diameter, 0.089 inch thick. It replaces original part numbers C5NN1N195A, 81811561, 9N1195. (Item #: 164443, Ref: C5NN1N195A) $1.50

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 81811263, C0NN1058A. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For models 2000 3 cylinder, 2110, 2120, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3610, 4000 3 cylinder, 4000SU, 4110 all 1965 and up using 12 inches x 28 inches 4 rail spin out rims. Replaces: C5NN1050J. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $470.00

Wheel Bearing Kit - For Ford tractor models 600 (1955-64), 700 (1955-64), 800 (1955-64), 900 (1955-64), 2000 (1955-64), 4000 (1955-64), Replaces manufacturer number WBK-JD-2, Kit Includes: (1) Inner Cone (Inside Diameter: 1.25", Width: 0.5937"), (1) Inner Cup (Outside Diameter: 2.328", Width: 0.465"), (1) Outer Cone (Inside Diameter: 0.75", Width: 0.655"), (1) Outer Cup (Outside Diameter: 1.781", Width: 0.475"), (1) Seal, (Item #: 165731) $29.70

Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E) $3.50

Wheel Nut and and Stud Pack (6) - For Ford tractor models Dexta, NAA, Super Dexta, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2300, 2600, 2610, 2810, 2910, 3000, 3055, 3230, 3300, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 4630, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, Replaces OEM number C5NN1107F, 81816580, C5NN1012B, 81815739, Sold in Packs of 6, (Item #: 177012) $27.90

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces D9NN1036CA, D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B, C0NN1050F, NCA1020B, 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $635.00

Wheel Stud, Rear - 5/8 inch-18 thread, .690 inch outside diameter on serration, length (without head) is 1- 15/16 inches. For tractor models: 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, (4000 1958-1964). (Item #: 111218, Ref: 312696) $3.70

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.40

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $7.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 4000 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford 4000 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 4000 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Ford 4000 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford 4000 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford 4000 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $6.98

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 9N5182) $44.30

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.50

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $19.98

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $119.41

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.90

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $31.40

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $760.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $585.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $71.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $29.70

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $273.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.60

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $56.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.20

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $51.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $51.00

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $36.10

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $106.00