Belt - Serpentine - For Ford tractor models 5640 (Less Air), 6640 (Less Air) Replaces Ford OEM number F0NN8620FA, , Compatible with New Holland tractor models TS90, TS100, Replaces New Holland OEM number 86514606, 81865048, 6 Rib, 87-7/8", (Item #: 161789)$21.80
Belt - Serpentine - For Ford tractor models 5640 (With AC), 6640 (With AC), 7740 (With AC), 7840 (With AC), 8240 (With AC), 8340 (With AC) Replaces Ford OEM number F3NN8620AA, 82850752, FONN8620EA, , Compatible with New Holland tractor models TS90, TS100, TS110, Replaces New Holland OEM number 87309963, 81865047, 18650471, 86518908, 6 Rib, Length: 100-3/8", (Item #: 161791)$18.50
Brakes
Brake Actuator Assembly - For Ford tractor models 5610, 5610S, 5640, 5900, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number E6NN2N317AA, 83956597, (Item #: 128278)$134.00
Brake Actuator Rod - For tractor models (5610, 5900, 6610, 6710, 6810, 7610, 8010 all 5/1989 and up), 5610S, 6610S, 7610S, 7810S, 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. (Item #: 182778, Ref: E8NN2466DA)$24.70
Brake Disc, 9 Inch - With 1-9/32 inch wide lining, this disc was used in later production than the 5/8 width lining. This disc is 8 7/8 inches outside diameter, 2 1/8 inches inside diameter, facing width 1.31 inches, 22 internal tooth count. Used with 9 inch actuators. This part replaces Ford part numbers E9NN2A097BA, E9NN2N097BA, 83989830, 81818854, 83956599, E6NN2A097AA, 87518036, C7NN2A097B. (Item #: 105499, Ref: E9NN2A097BA)$25.50
Brake Disc, Intermediate Steel - Used with 9 inch actuators, this intermediate steel disc measures 8.976 outside diameter and 5 inch inside diameter. This part replaces Ford OEM numbers E6NN2N315AA, E6NN2N615AA, 83956598. Used on the following with 9 inch actuator disc brakes: 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 650, 6500, 660, 6600, 661, 6610, 6610S, 6640, 6700, 6710, 681, 6810, 7000, 7010, 7100, 7200, 7410, 755, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8030, 8210, 8240, 8340, TS100, TS110, TS120A, TS6000 Brazilian, TS6020 Brazilian, TS6030 Brazilian, TS6040 Brazilian, TS80, TS90 (Item #: 105513, Ref: E6NN2N315AA)$14.70
Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586)$2.20
Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Item #: 150914, Ref: D9NN2N289AA)$3.30
Cable, Park Brake - Left Hand - For Ford tractor models 5640 (w/cab), 6640 (w/cab), 7740 (w/cab), 8240 (w/cab), 8340 (w/cab) Replaces Ford OEM number 82016966, 81868997, 81871903, 83999908, E9NN2853EC, E9NN2853EB, E9NN2853EA, , Compatible with New Holland tractor models TS90 (Platform or Cab), TS100 (Platform or Cab), TS110 (Platform or Cab), TS115 (Platform or Cab), TV140 (LH and RH Cables), TV145 (LH and RH Cables), TV6070 (LH and RH Cables), Length: 37.402", (Item #: 162017)$48.00
Cable, Park Brake - Right Hand - For Ford tractor models 5640 (w/cab), 6640 (w/cab), 7740 (w/cab), 7840 (w/cab), 8240 (w/cab), 8340 (w/cab) Replaces Ford OEM number 82016965, 83999906, E9NN2853DA, E9NN2853DB, E9NN2853DC, , Compatible with New Holland tractor models TS90 (Platform or Cab), TS100 (Platform or Cab), TS110 (Platform or Cab), TS115 (Platform or Cab), Replaces New Holland OEM number 83999906, 82016965, (Item #: 162018)$51.00
Intermediate Brake Disc - For Ford tractor models 5640, 6640, 7740, 8240, 8340 Replaces Ford OEM number E9NN2N315CB, 81866478, , Compatible with New Holland tractor models TS90, TS100, TS110, TV140, (Item #: 155480)$19.00
Clutch Kit - Complete Kit includes 13 inch disc, pressure plate, release bearing, pilot bearing and alignment tool. For tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240, 8340, 8530, TS100, TS110, TS90, TW5. Replaces OEM 82006010 and 82011590. (Item #: 112318, Ref: 1112-6145)$455.00
No Picture
Clutch Kit - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number 82011590, 82011593, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Springs, Clutch Type: Woven, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, For Pressure Plate use Item #: 119888, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119870)$429.00
No Picture
Clutch Kit - For Ford tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240, 8340 Replaces Ford OEM number 82011590, 82011591, 86634447, , Compatible with New Holland tractor models TS90, TS100, TS110, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Springs, Clutch Type: 9 Pad, Ceramic-metallic, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, Diaphragm, For 12x12 Transmissions use Item #: 119888, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119871)$440.00
No Picture
Clutch Kit - For Ford tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7810, 7840, 8240, 8340, 8530, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number 82001664, 82006009, 82006010, 82011590, E8NN7550PA, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: 7 Pad, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, Diaphragm, For Clutch Plate use Item #: 113903, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119872)$514.00
Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4 inch hub 82011593, 13 inch single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB (Item #: 112322, Ref: 11126087)$350.00
Clutch Master Cylinder Repair Kit - For tractor models 5640, 6640, 7740, 7840, 8240, (8340 with 12 x 12 trans), (TS90, TS100, TS110 1/1997 and up). Replaces 81869662, 81873179, 81873388, F1NN2R169AA, F1NN7578AA, FP574. (Item #: 127441, Ref: 81873388)$45.00
Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A)$5.10
Clutch Unit - Diaphragm, Remanufactured - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 8010, Clutch Diameter - 13", Clutch Hub Diameter - 1-3/4", Clutch Splines - 10, Clutch Center - Spring, Clutch Type - 6 Pads, Pressure Plate Size - 13", Pressure Plate Type - Diaphragm, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205234)$485.01
Clutch Unit, Remanufactured - For Ford tractor models 5640, 6410, 6640, 6810, 7740, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: 9 Pad, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, Includes pressure plate and engine clutch disc only, Does not include bearings, For a New version of this sku use Item #: 122250, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206267)$495.01
Clutch Unit, Remanufactured, 82011590 - For Ford tractor models 5640, 6410, 6640, 6810, 7740, Replaces Ford OEM number 82011590, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: Woven, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, Includes pressure plate and engine clutch disc only, Does not include bearings, (Item #: 206266)$395.01
Pressure Plate Assembly - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7840, 8240, 8340, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS100, TS110, Pressure Plate Size: 13", Pressure Plate Levers: Diaphragm, Pressure Plate Springs: Diaphragm, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206267, (Item #: 122250)$341.00
Pressure Plate Assembly, Remanufactured, D8NN7563AB, 86634446 - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7840, 8240, 8340, 8530, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number D8NN7563AB, , Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 86634446, Pressure Plate Size: 13", Pressure Plate Levers: 4, Pressure Plate Springs: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206209)$196.00
Release Bearing - This Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, width 0.8700 inches. This is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, 82010859, 83914247, 83933520, 83946908, 86534551 and N3004. (Item #: 112189, Ref: N1585)$21.70
Release Bearing and Hub - This is a Hydraulic Release Bearing and Carrier. It is used on 12 x 12 transmissions. Ford / New Holland 5640, 6640, 7740, 7840, 7840O, 8240, 8340, T6010, T6020, T6030, T6050, TS100, TS100A, TS110, TS110A, TS115, TS115A, TS90. Replaces 47134440, 81864436, 82005471, F0NN7580AA, 510001920, AZ36461. (Item #: 122164, Ref: F0NN7580AA)$242.00
Throw Out Bearing Carrier - This Throw Out Bearing Hub has 2.055 inch inside diameter. Replaces 83992559, E1NN7571CA, E1NN7571CB. Uses N1585 release bearing, not included. (Item #: 154932, Ref: E1NN7571CA)$64.00
Air Conditioning Compressor - This Air Conditioning Compressor comes complete with Clutch. Sanden Style. It mounts to the Side of Engine-Front. Used in production from 11/1/1991 to 3/31/1994 on Ford/ New Holland 5640, 6640, 7740, 7840, 8240, 8340. Replaces F0NN19D629AB, F0NN19D629AA. (Item #: 114070, Ref: F0NN19D629AB)$273.00
Belt Tensioner - This Belt Tensioner is used on 2450 Windrower, 2550 Windrower, 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340, HW300 Windrower, HW320 Windrower (Item #: 161793, Ref: 87801102)$36.00
Radiator Cap - Used as a primary radiator cap for many Japanese built compact tractors, this 13 psi cap is also used for radiator overflow reservoir systems in some larger ag tractors. Fits 3/4 inch deep neck. Verify OEM numbers before ordering. Replaces 157017-2030, 2097708, 3280783M1, 3280783M1GV, A171919, A171919GV, ESL10493GV, TPCH18207GV, TP-CH18207GV, 2097708GV, 1570172030GV, 157017-2030GV, E5TH8100AA, E5TH8100AAGV, CH18207, ESL10493, SBA145546060, 87749607. Sub for CH10427 (Item #: 124400, Ref: CH18207)$9.08
No Picture
Radiator Drain Faucet - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2031, 2100, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4600, 4610, 4630, 5000, 5110, 5600, 5610, 5640, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7410, 7610, 7700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030 Replaces Ford OEM number 81465471, C9NN8115A, C5NN8115B, , Compatible with New Holland Harvester (s) 1880, 1890, 1895, 1900, 1915, 2100, Compatible with New Holland Baler (s) 1283, 1425, 1426, Compatible with New Holland Hay Cutting (s) 1100, 1112, 1114, 1116, 1118, 1469, 1495, 1496, 1499, Replaces New Holland OEM number 81465471, Fits all models with 1/4" NPT threads, (Item #: 176414)$4.90
Radiator, Premium Used - For Ford tractor models 5640, 6640, 7740, Replaces Ford OEM number 82010660, 81872067, 82010661, 82015101, 82015103, F0NN8005AA15M, F0NN8005AB15M, F0NN8005AC15M, F0NN8005AD15M, F0NN8005AE15M, F0NN8005AF15M, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 118308, (Item #: 300337)$415.01
Water Pump - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS90. With serpentine pulley. Will not fit models equipped with Mando Air Conditioning. Pulley diameter is 140 mm. Replaces 87801112, F0NN8501CC. (Item #: 115041, Ref: 87800712)$180.00
Water Pump - For tractor models 5640, 6640, 7740, LS190, LX985. Replaces F0NN8501DC, F0NN8501DB. With serpentine pulley, Will not fit models equipped with Mando Air Conditioning. Pulley diameter is 147 mm. (Item #: 123590, Ref: 87800714)$171.00
Water Pump - For Ford Tractors with Mando Air Conditioning Compressor. 6640, 7740, 7740O, 7840, 7840O, 8240, 8340. Replaces original part number 87840257. (Item #: 157631, Ref: 87840257)$231.00
Water Pump Repair Kit, with 2 Impellers - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. Replaces FBPN8591B. (Item #: 179954, Ref: FBPN8591A)$144.00
Decals and Emblems
Decal Set, Hood - For model 6640. (Item #: 183503, Ref: R4673)$96.00
Drive Train
Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B)$16.98
Counter Shaft - This Transmission Counter Shaft is used on Ford 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610. It has a 2.065 inside diameter. Replaces original part numbers C9NN7111B and C5NN7111G. (Item #: 134480, Ref: C9NN7111B)$162.00
Counter Shaft - Note that there is some discrepancy in OEM numbers on this part. This Counter Shaft has an inside diameter of 2.125 inches. Measure before ordering. If you have 2.065 inside diameter, then order part number C9NN7111B. It replaces C5NN7111G, C9NN7111B, D0NN7N047A, D2NN7111A, 81826590, 81878438, 81822960, 82930758, 82987564, 82983059, 83948780, 83960001, E6NN7111AA, E4NN7110AA (Item #: 172859, Ref: E6NN7111AA)$190.85
Gear, 1st and 5th - Used on 8 speed transmissions on Ford models 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7840, 8010, 8240, TS100, TS90. This gear has 46 and 28 teeth. It replaces OEM numbers 83946988, 82987560, E6NN7N100BA, E2NN7N100AA, 83959993, D2NN7N100A, 81826587 (Item #: 179401, Ref: E6NN7N100BA)$175.00
Gear, 2nd and 6th - Gear has 28 and 43 teeth. It is used is some 8 speed transmissions of Ford Tractors. Replaces OEM numbers C5NN7N101B, D2NN7N101A, 81813520, E2NN7N101AA, 81826588, C5NN7N101D, E6NN7N101BA, 82987561, 83959996, 83945994 (Item #: 179205, Ref: E6NN7N101B)$143.00
Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534)$3.50
Gear Shift Boot - This Gear Shift Boot is used on Ford / New Holland the following models with Dual Command Or Synchro Command Transmissions: 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS115, TS90. Replaces 82009265 (Item #: 178922, Ref: 82009265)$81.00
Gear Shift Cover Gasket - This Gear Shift Gasket is used with C5NN7222 Gear Shift Assembly. Replaces 83958298, D2NN7223A, E0NN7223BA, 81829229, E5NN7223AA (Item #: 164338, Ref: E5NN7223AA)$3.20
Gear Shift Housing with Boot - This Gear Shift Housing includes 82009265 Boot. It is used on tractors built 3/01/1993 and later, with Dual Command and Synchro Command Transmissions. Fits some 5640, 6640, 7740, 7840, 8240, 8340 tractors. Replaces 82009262, 82009265 (Item #: 179375, Ref: 82009262)$173.00
Input Drive Shaft - This Input Drive Shaft, is hollow. It has a Length of 19.22 inches, 10 Spline, 20 Teeth. Spline Flange is 1.46 from end. Replaces original part numbers E2NN7017EA, 83946987. (Item #: 179309, Ref: E2NN7017EA)$224.00
Input Shaft Seal - The measurements on the seal are 2.283 inch inside diameter, 3.130 inch outside diameter, 0.375 inch wide. This seal replaces OEM numbers: D9NN7048BA, D6NN7048B, D2NN7048A, 81826482, C5NN77047A, D9NN7048AA, 83924926, 83912260, 83924160. Used on Ford 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, TS100, TS90 (Item #: 172928, Ref: D9NN7048BA)$6.20
Input Shaft Tube - This Input Shaft Tube is used on 5610, 6610, 7610, 5640, 6640, 7740. It has a 2.045 inch outside diameter. Replaces original part number E0NN7N541BB. (Item #: 179308, Ref: E0NN7N541BB)$143.00
Main Shaft - 30/18 teeth. For tractor models (5000 with dual power 6/1973 and up), (5600, 6600, 6700, 5610, 6610, 6710, 6810 with dual power), 7810, 8010, 5610S, 6610S, 7610S, 7810S, (5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110 with 8 speed less dual power, 16 speed with dual power). Replaces E7NN7C094AA. (Item #: 182728, Ref: 82983066)$378.00
Output Shaft and Coupling Assembly - Used on 8 speed transmissions on the following (7000 With or without Dual Power), (5600, 6600, 6700 all 5/1984 and later without Dual Power), (5900 1981 - 7/1987 with Dual Power), (5610, 6610, 6710 6810, 7610, 7710 1981-7/1987 with Dual Power), 5640, 6640, 7740, 7840, 8240. Note that the non-splined end is 0.75 inches in diameter. Replaces Ford part numbers 81833752, 81822960, 81826590, 81878438, 82983059, D0NN7N071A, D2NN7N071A, D2NN7N071B, 83959995, E6NN7N71BA, E6NN7N071BA (Item #: 182884, Ref: E6NN7N071BA)$178.00
Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA)$358.00
Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91)$6.40
Reverse Idler Shaft - Used on Ford / New Holland 4 and 6 cylinder models with 8 speed transmissions, this shaft is 3.5 inches long. Replaces OEM numbers C7NN7140C, 81817885 (Item #: 182891, Ref: C7NN7140C)$51.00
Secondary Countershaft - With a teeth count of 16-35-16, this Secondary Countershaft replaces Ford part numbers D9NN7B281CA, 81822961, C9NN7113B. It is used on Ford models: 345C, 345D, 445, 5000, 5100, 5110, 5190, 5200, 5340, 545, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240 (Item #: 166071, Ref: C9NN7113B)$135.00
Secondary Output Shaft Bearing - With measurements of 19mm inside diameter, 53.9mm outside diameter, and 15.9mm this bearing and cone assembly replaces Ford / New Holland part numbers D0NN7N047A, D2NN7111A, 81823619, 81823620, 81822960, 82930758, E6NN7061BA, E6NN7106AA, D0NN7N048A (Item #: 182935, Ref: D0NN7N047A)$41.00
Shift Fork - This is a 2nd and 6th Shift Fork. It replaces C5NN7231B, E8NN7231AA, 81804917, 81804928, 83974360 (Item #: 167826, Ref: E8NN7231AA)$58.00
Transmission Front Plate - This transmission plate is for models 5000 and 6600 both with 7, 8 or 12 speed transmissions. For models with 8 speed transmission 5610S, 5640, 6610S, 6640, 6810S, 7610S, 7740, 7810S, 7840, 8240. Replaces numbers 83909540 and 14328501. C7NN7N055A (Item #: 172984, Ref: C7NN7N055A)$166.00
Transmission Mainshaft Front Bearing - Used in the transmissions of some of the following Ford models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, this bearing has an inside diameter of 65mm, outside diameter of 100mm and is 18mm wide. This bearing has applications not list. It replaces OEM numbers; Ford / New Holland 81804635, C5NN7N046A, 5181866, Kubota 8101-06013. Landini SKF6013, 339673X1, Massey Ferguson 339673X1, Yanmar 24101-060134, Zetor 971014, 971019 (Item #: 182963, Ref: C5NN7N046A)$43.00
Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA)$78.00
Electrical System
Alternator - 12 volt, 70 amp. For tractor models (3230 1990-95 with 3-192 dsl), (3430 1990-98 with 3-192 dsl), (3930 1990-96 with 3-201 dsl), (4630 1989-96 with 3-201 dsl), (5030 1992-96 with 4-256 dsl), (5610 1986-92 with 4-256 dsl), (5640 1992-93 with 4-268 dsl), (6610 1986-92 with 4-268 dsl), (6640 1992-93 with 4-304 dsl), (7610 1987-91 with 4-268 dsl), (7710 1986-87 with 4-268 dsl), (7740 1992-93 with 4-304 dsl), (7840 1992-93 with 6-401 dsl), (8240 1992-93 6-456 dsl), (8340 1992-93 with 6-456 dsl). All Marelli equipped. Replaces 63324274, 63324273.ALU0007 (Item #: 111070, Ref: E7NN10B376BB)$129.00
Alternator - This is a 70 amp unit with battery sensor. D+, D+, B+ and W terminals. Has 'Lucor' connector as well under plastic terminal protector. It replaces 81863039, 82857207, E7NN10B376AB, F0NN10B376BB, 54022336, 54022336D, 63324273, LRA02690, MG0283, MG283, MAN141 (Item #: 111070, Ref: E7NN10B376BB)$129.00
Alternator New Lucas With Pulley - New Lucas Alternator Assembly, 12-volt, 45 amp with pulley and fan. For industrials: LS190, LX985~ tractors: 5640, 6640, 7740, 7840, 8240, 8340. For 5640, 6640, 7740, 7840, 8240, 8340, LS190, LX985. (Item #: 114717, Ref: 82001260)$137.00
Blower Motor - Blower motor only, original Fasco replacement motor, 12 volt single speed 2 wire motor with 5/16 inch shafts. TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TS90, TS100, TS110, TS115, 8160, 8240, 8260, 8340, 8360, 8560, 5640, 6640, 7740, 7840. (Item #: 170462, Ref: 81870361)$94.00
No Picture
Hazard Warning Switch Assembly - For Ford tractor models TW5 (11/85-later), TW15 (11/85-later), TW25 (11/85-later), TW35 (11/85-later), 2310 (3/82-12/83), 2610 (1/81-4/83), 2810 (1/83-2/90), 2910 (1/83-2/90), 3230 (3/90-9/94), 3430 (3/90-later), 3610 (8/81-4/83), 3910 (5/83-2/90), 3930 (3/90-later), 4110 (1/81-2/90), 4130 (3/90-later), 4630 (3/90-later), 4830 (7/90-later), 5030 (7/90-later), 5110 (5/83-later), 5610 (5/83-later), 5640 (11/91-later), 5900 (5/83-later), 6410 (5/83-later), 6610 (5/83-later), 6640 (11/91-later), 6710 (2/83-later), 6810 (5/83-later), 7410 (5/83-later), 7610 (1/81-10/91), 7710 (2/83-later), 7740 (11/91-later), 7810 (11/85-later), 7840 (11/91-later), 7910 (11/85-later), 8210 (11/85-later), 8240 (11/91-later), 8340 (11/91-7/98), 8530 (11/85-later), 8630 (11/85-later), 8670 (9/93-later), 8670 (A 2/01-later), 8730 (11/85-later), 8770 (9/93-later), 8770 (A 2/01-later), 8830 (11/85-later), 8870 (9/93-later), 8870 (A 2/01-later), 8970 (9/93-later), 8970 (A 2/01-later), Compatible with Ford Construction and industrial models 230A (1/81-4/83), 234 (1/75-4/83), 334 (1/81-4/83), 335 (1/83-2/84), 445C (12/88-later), 445D (12/88-later), 545D (9/92-later), 555C, 555D, 575D, 655C, 655D, 8400 (11/91-later) Replaces Ford OEM number E4NN13A350AA, , Compatible with New Holland tractor models 1530 (10/96-later), 1630 (10/96-later), 1725 (10/96-later), 1925 (10/96-later), Replaces New Holland OEM number E4NN13A350AA, (Item #: 170116)$23.60
Relay - Ignition Load - For Ford tractor models 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8160, 8240, 8260, 8340, 8360, 8560 Replaces Ford OEM number 83990084, 81AG14N089CA, , Compatible with New Holland tractor models TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TS90, TS100, TS110, TS115, Replaces New Holland OEM number 83990084, 81AG14N089CA, (Item #: 155403)$14.50
Starter - Replaces Bosch, Iskra and Marelli units. Lucas 12v, 10 tooth drive. For tractor models (5610s 1993-96 with 4-268 diesel), (5640 1992-97 with 4-268 diesel), (5640SL, 5640SLE 1994-97 with 4-268 diesel), (6640, 7740 1992-97 with 4-304 diesel), (6640SL, 6640SLE, 7740SL, 7740SLE 1994-97 with 4-304 diesel), (7840 1992-97 with 6-401 diesel), (7840SL, 7840SLE 1994-97 with 6-401 diesel), (8240, 8340 1992-97 with 6-456 diesel), (8240SL, 8240SLE, 8340SL, 8340SLE 1994-97 with 6-456 diesel), (555C 1992 with 3 cyl diesel), (555D 1992-97 with 4-256 diesel), (555E 1996-98 with 4-256 diesel), (575D 1992-97 4-256 diesel), (575E 1996-98 with 4-304 diesel), (655C 1992 with 4-268 diesel), (655D 1992-97 with 4-268 diesel), (655E 1996-97 with 4-304 diesel), (675D 1992-97 with 4-268 diesel), (675E 1996-98 with 4-304 diesel). Replaces 9007044014, 1369015, 1369023, 81868126, 82005342, 82005343, 82007917, 82012413, 82013922, 8203923, 86513093, 86628964, 87755550. (Item #: 113233, Ref: 82005342)$168.00
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (5030 1992-98 with 4-256 dsl), (5640 1991-98 with 4-268 dsl), (6530HC 1992-97 with 4-268 dsl), (6640 1991-98 with 4-304 dsl), (7740 1991-98 with 4-304 dsl), (7840 1991-96 with 6-401 dsl), (8240, 8340 1992-97 with 6-456 dsl). Replaces 1369023. (Item #: 113233, Ref: 82005342)$168.00
Starter - Bosch Style DD (18024), Used - For Ford tractor models 5610, 5640, 6640, 7740, 7840, 8240, 8340, Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, Replaces OEM number 9007044014, 112074, 120-562, 18024, 82980885, 12 Volt, CW Rotation, 10 Teeth, For a new version of this item use Item #: 113233, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413233)$107.01
Voltage Regulator - This is a 12v, 14.4 volt set, A-circuit, with battery temp sensor. Fits alternators: E7NN10B376AB, E7NN10B376BB, E3NN10B376AD, 81863039, 81863039, 81868798. Fits on the back of Lucas/Marelli alternators. Replaces E8NN10316AA, 83981529 (Item #: 182960, Ref: E8NN10316AA)$34.00
Engine Bearings
Connecting Rod Bearing - .010" Oversize - Journal - For Ford tractor models 3230, 3430, 5610S, 5640, 6640, Compatible with Ford Construction and industrial models 345C, 445C, 555E, 655D, 655E, Compatible with Ford Engine (s) 192 (diesel), 268 (genesis diesel), 304 (genesis diesel), Compatible with New Holland tractor models 6610S, 7010, Replaces OEM number 87791051, Sold per journal, Bearing Size: .010" Oversize, For 1.410" wide bearing use Item #: 106373, (Item #: 106371)$6.98
Connecting Rod Bearing - .020" Oversize - Journal - For Ford tractor models 3230, 3430, 5610S, 5640, 6640, Compatible with Ford Construction and industrial models 345C, 445C, 555E, 655D, 655E, Compatible with Ford Engine (s) 192 (diesel), 268 (genesis diesel), 304 (genesis diesel), Compatible with New Holland tractor models 6610S, 7010, Replaces New Holland OEM number 87791052, Sold per journal, Bearing Size: .020" Oversize, For 1.410" wide bearing use Item #: 106373, (Item #: 106372)$3.98
Connecting Rod Bearing - .030" Oversize - Journal - For Ford tractor models 3230, 3430, 5610S, 5640, 6640, Compatible with Ford Construction and industrial models 345C, 445C, 555E, 655D, 655E, Compatible with Ford Engine (s) 192 (diesel), 268 (genesis diesel), 304 (genesis diesel), Compatible with New Holland tractor models 6610S, 7010, Replaces OEM number 87790308, Sold per journal, Bearing Size: .030" Oversize, For 1.410" wide bearing use Item #: 106372, (Item #: 106373)$2.98
No Picture
Connecting Rod Bearing - Standard - Journal - For Ford tractor models 3230, 3430, 5610S, 5640, 6640, Compatible with Ford Construction and industrial models 345C, 445C, 555E, 655D, 655E, Compatible with Ford Engine (s) 192 (diesel), 268 (genesis diesel), 304 (genesis diesel), Compatible with New Holland tractor models 6610S, 7010, Replaces OEM number 87790304, Sold per journal, Bearing Size: Standard, Bearing Width: 1.250", For 1.410" wide bearing use Item #: 106373, (Item #: 106370)$11.50
Flywheel With Ring Gear - This Flywheel with Ring Gear is used with 13 inch clutches. It has 128 teeth. Used on engines: BSD332, BSD333, BSD444, BSD444T Replaces F1NN6375AA, 81871636 (Item #: 159169)$690.00
LuK® Permium Clutch Pilot Bearing - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6500, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number F0NNN779AA, 83992560, C5NNN779B, For Standard Duty use Item #: 108005, (Item #: 169092)$28.80
Main Bearings - .010" Oversize - Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268, 304, 304T Replaces Ford OEM number 87790262, 87790268, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 87790268, 87790262, Sold in complete set, Bearing Size: .010" Oversize, Full groove upper with slot and .370" oil hole, For Standard main bearing use Item #: 106423, (Item #: 106420)$114.00
Main Bearings - .020" Oversize - Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268, 304, 304T Replaces Ford OEM number 87790492, 87790269, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 87790269, 87790492, Sold in complete sets, Bearing Size: .020" Oversize, Full groove upper with slot and .370" oil hole, For Standard main bearing use Item #: 106423, (Item #: 106421)$19.98
Main Bearings - .030" Oversize - Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268, 304, 304T Replaces Ford OEM number 87790264, 87790270, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 87790270, 87790264, Sold in complete set, Bearing Size: .030" Oversize, Full groove upper with slot and .370" oil hole, For Standard main bearing use Item #: 106423, (Item #: 106422)$11.98
Main Bearings - .040" Oversize - Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268, 304, 304T Replaces Ford OEM number 87790265, 87790271, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 87790271, 87790265, Sold in complete set, Bearing Size: .040" Oversize, Full groove upper with slot and .370" oil hole, For Standard main bearing use Item #: 106422, (Item #: 106423)$127.00
Main Bearings - Standard - Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268, 304, 304T Replaces Ford OEM number 87790260, 87790488, 87790489, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 87790489, 87790260, 87790488, Sold in complete set, Bearing Size: Standard, Full groove upper with slot and .370" oil hole, For .010" main bearing use Item #: 106423, (Item #: 106419)$67.00
No Picture
PTO Drive Clutch Piston - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600 (& C, O), 6610 (& O, S), 6640 (& O), 6700, 6710, 6810 (& S), 7000, 7100, 7200, 7410, 7600 (& C), 7610 (& O, S), 7700, 7710, 7740 (& O), 7810 (& O, S), 7840 (& O), 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670 (& A), 8700, 8730, 8770 (& A), 8830, 8870 (& A), 8970 (& A), 9000, 9030 (& E, V), 9200, 9600, 9700, Compatible with Ford Construction and industrial models 8400 Replaces Ford OEM number F1NNN786AA, D3NNN786A, C5NNN786C, C9NNN786A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, TV6070, 7010, 8010, (Item #: 176508)$23.40
No Picture
Thrust Washer - For Ford tractor models Major, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6000, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8340, Compatible with Ford Construction and industrial models 3500, 3550, 4500, Replaces Ford OEM number 508E4230A, (Item #: 174131)$4.10
Head Gasket Set - For Ford tractor models 5610S, 5640, 6640, 7740, Compatible with Ford Construction and industrial models 555E, 575E, 655D, 655E, 675E, Compatible with Ford Engine (s) 268 (Genesis Diesel), 304T (Genesis Diesel) Replaces Ford OEM number 81878059, 87790292, , Compatible with New Holland tractor models 6610S, 7010, 7610S, Replaces New Holland OEM number 81878059, Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 106332)$68.00
Engine Rebuild Kits
Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons, 304 Genesis Diesel - For Ford tractor model 6640 (11/91-12/96), Compatible with Ford Engine (s) 304 (Genesis diesel), Compatible with New Holland tractor model 6610S (1/94 to s/n 359817M), Standard Bore: 4.4007", Stroke: 5.000", Naturally aspirated, non-emissionised, Models 11/91-later, 1.500" piston pin, Kit includes: .020" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106422, (Item #: 131047)$439.00
Engine Rebuild Kit - Less Bearings - .030" Oversize Pistons, 304 Genesis Diesel - For Ford tractor model 6640 (11/91-12/96), Compatible with Ford Engine (s) 304 (Genesis diesel), Compatible with New Holland tractor model 6610S (1/94 to s/n 359817M), Standard Bore: 4.4007", Stroke: 5.000", Naturally aspirated, non-emissionised, Models 11/91-later, 1.500" piston pin, Kit includes: .030" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106422, (Item #: 131048)$426.00
Engine Rebuild Kit - Less Bearings - .040" Oversize Pistons, 304 Genesis Diesel - For Ford tractor model 6640 (11/91-12/96), Compatible with Ford Engine (s) 304 (Genesis diesel), Compatible with New Holland tractor model 6610S (1/94 to s/n 359817M), Standard Bore: 4.4007", Stroke: 5.000", Naturally aspirated, non-emissionised, Models 11/91-later, 1.500" piston pin, Kit includes: .040" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106422, (Item #: 131049)$426.00
Engine Rebuild Kit - Less Bearings - Standard Pistons, 304 - For Ford tractor model 6640 (11/91-12/96), Compatible with Ford Engine (s) 304 (Genesis diesel), Compatible with New Holland tractor model 6610S (1/94 to s/n 359817M), Bore: 4.4007", Stroke: 5.000", Naturally aspirated, non-emissionised, Models 11/91-later, 1.500" piston pin, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For cylinder repair sleeve use Item #: 106422, (Item #: 130791)$439.00
Piston and Rings - .040" Oversize - For Ford tractor models 5610S (12/93-later), 5640 (11/91-1/98), 6640 (11/91-1/98), 6640 (O, 11/91-1/98), 7740 (11/91-1/98), 7740 (O, 11/91-1/98), Compatible with Ford Construction and industrial models 555E (1/96-later), 575E (1/96-later), 655E (1/96-later), 675E (1/96-later), Compatible with Ford Engine (s) 304 (Diesel), 456 (Diesel) Replaces Ford OEM number 81873455, 81873461, 87801089, , Compatible with New Holland tractor models 5610S (12/93-later), 6610S (12/93-later), 7010 (4/96-later), 7610S (12/93-later), 7610S (1/94-later), 7840 (11/91-12/98), 7840 (O, 2/93-1/98), 8240 (11/91-12/96), 8340 (11/91-7/98), Compatible with New Holland Hay Cutting (s) 2450, 2550 (1/93-6/98), Piston, pin, rings and retainer set for 0.040" over, (Item #: 166702)$43.98
Rebore Kit .020 - For Ford tractor models 5610S, 5640, 6640, 7740, 7840, 8240, 8340, Compatible with Ford Construction and industrial models 555E, 575E, 655E, 675E Replaces Ford OEM number 87801072-20, , Compatible with New Holland Hay Cutting (s) 2450, 2550, (Item #: 166701)$65.00
Rebore Kit, Standard - For Ford tractor models 5610S, 5640, 6640, 7740, 7840, 8240, 8340, Compatible with Ford Construction and industrial models 555E, 575E, 655E, 675E, Compatible with Ford Engine (s) BSD444, BSD666, 268, 401, Replaces Ford OEM number 87801070, 87802373, Standard Bore: 4.4007", Includes: Piston, Rings, Pin and Retainers, Sold per cylinder, (Item #: 166633)$87.00
Engine Parts
Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number C0NN7B442A, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 81805123, (Item #: 155502)$18.60
Clutch Disc - For Ford tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240 Replaces Ford OEM number E0NN7R000AA, E0NN7R000AB, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 83947188, 6.820" Major / 6.640" Minor Inner Diameter, 9.005" Outer Diameter, 0.180" Width, 80 Teeth, (Item #: 155515)$80.00
Clutch Disc - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM number 82001251, Inner Diameter: 4.70" (119.56MM), Outer Diameter: 6.08" (154.52MM), Thickness: 0.096" (2.48MM), Teeth: 63, (Item #: 155521)$14.60
Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number E0NN7Z031AA, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS120, 7010, 8010, Replaces New Holland OEM number 83925696, (Item #: 155540)$11.90
Crankshaft Pulley Spacer - Replace Ford part numbers F0NN6B306AA and 87800706, this space (collar) measures 44mm inside diameter, 60mm outside diameter and 21mm long. It is used on Ford / New Holland models: 345C, 345D, 545C, 545D, 555C, 555D, 555E, 575D, 575E, 650, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, 6640, 7740, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5610, 5610S, 5640, 5900, 6610, 6610S, 6710, 6810, 6810S, 7500, 7610, 7610S, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, 9030E, 9030V, L865, LB110, LB115, LB115.B, LB75.B, LB90, LS180, LS190, LX865, LX885, LX985, TB100, TB110, TB120, TB80, TB90, TS90, TS100, TS110, TS115, TW5, TW15, TW25, TW35 (Item #: 168951, Ref: F0NN6B306AA)$27.50
Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A)$20.40
No Picture
Cylinder Head, Remanufactured, 7802123 - For Ford tractor models 6640, 7740, Replaces Ford Casting number 7802123, Casting No. 7802123, Engine: BSD 450T, 5.0L, 304 CI, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 204686)$950.01
No Picture
Cylinder Head, Remanufactured, 87802121 - For Ford tractor models 5610, 5640 (1/1997-later), 6610, 6640 (1/1997-later), 7610, 7740 (1/1997-later), 9030, Compatible with Ford Construction and industrial models 575, 675, Compatible with New Holland tractor models TS100 (11/1997-07/2003), TS110 (11/1997-07/2003), 7010 (s/n 850179M-later), Replaces OEM number 87802121, 87802940, 81876753, 87802120, 87802939, Replaces Casting number E9NN6090AD, E9NN6090AE, Ports: Intake - Square, Exhaust - Round, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 204283)$950.01
Cylinder Head, Used - For Ford tractor models 5610, 5610S, 5640 (1/1997-later), 6610, 6640 (1/1997-later), 7100, 7740 (1/1997-later), 9030, Compatible with New Holland tractor models TB100 (12/2002-later), TB110 (12/2002-later), TS100 (11/1997-07/2003), TS110 (11/1997*07/2003), Replaces OEM number 87802121, 87802940, 81876753, 87802120, 87802939, E9NN6090AAD, E9NN6090AE, Ports: Intake - Square, Exhaust - Round, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 204283, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404283)$475.01
Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S)$2.10
Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 8240, 8340, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, 650, 655C, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, 256 Replaces Ford OEM nos E5NN6C044A, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, 5610S, 6610S, 6640, 6810S, 7010, 7610S, 7740, 7840, 8010, 8340, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044A, 83956700, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434395)$30.01
No Picture
Intake Valve - For Ford tractor models 5610S, 5640, 6610, 6640, 6810, 7610, 7810S, 7840, 8160, 8240, 8260, 8340, 8360, 8560 Replaces Ford OEM number VPA7270, , Compatible with New Holland tractor models TS80, TS90, 7010, 8010, Replaces New Holland OEM number 81865092, (Item #: 176503)$16.50
Pulley - Belt Idler - For Ford tractor models 2000 (with A/C), 3000 (with A/C), 4000 (with A/C), 5000 (with A/C), 5640 (with A/C), 6640 (with A/C), 7740 (with A/C), 7840 (with A/C), 8240 (with A/C), 8340 (with A/C) Replaces Ford OEM number F0NN8A618BB, F0NN8A618BA, , Compatible with New Holland tractor models TS90 (with A/C), TS100 (with A/C), TS110 (with A/C), TS115 (with A/C), 5640 (with A/C), 6640 (with A/C), 7740 (with A/C), 7840 (with A/C), 8240 (with A/C), 8340 (with A/C), Replaces New Holland OEM number 81871906, O.D.: 4.303", I.D.: .637", Smooth, (Item #: 161792)$38.00
Ring Gear, Flywheel - This ring gear measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For gas and diesel models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA)$39.00
Valve Lifter, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2610, 2810, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8160, 8200, 8210, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 550, 555, 555E, 575E, 655, 655E, 675E, Compatible with Ford Engine(s) BSD326, BSD329, BSD332, BSD333, BSD442, BSD442T, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number C7NN6500B, C5NE6500C2, 83946434, E4HN6500AA, 83957729, C5NE6500C, , Compatible with New Holland tractor models TB90, TB100, TB110, TB120, TS80, TS90, 7010, 8010, 8240, For a new version of this item use Item #: 112190, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435585)$4.76
Engine Rings
Piston Pin Bushing - For Ford tractor models TW5, TW15, TW25, TW35, 2600, 3600, 3900, 4100, 4600, 4600SU, 5110, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, 535, Replaces Ford OEM number F0NN6207BA, (Item #: 166314)$22.90
Exhaust System
Exhaust Pipe, Vertical - This Exhaust Pipe is used with 82009292 muffler. Used on 4 cylinder: 5640, 6640, 7740, 4835, 5635, TL70, TL80 L/CAB, 6 cylinder: 7840, 8240, 8340. Replaces 82004294, D9NN5C262AB17M, E9NN5C262AB17M. (Item #: 168521, Ref: 82004294)$116.00
Muffler - For tractor models (5610S serial number 308716M and up with Emissionized Engine), (5640, 6640, 6640O 1-1-1997 and up), (6810S Mexico only), (TS90 with Emissionized Engine). Replaces VPE8208. Uses 83936215 gasket, not included. (Item #: 163523, Ref: 82011360)$230.00
Muffler - For tractor models (5640 with Power Star 4.4, 6640 with Power Star 5.0, 7740 with Power Star 5.0T All through 12/31/1996). Replaces 81871353, 81874712, 83990910, 89843678, E9NN5230CD17M, E9NN5230CE17M, E9NN5230CC17M, E9NN5230CB, E9NN5230CA. (Item #: 124218, Ref: 82009292)$325.00
Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Item #: 121925, Ref: T23262)$6.00
Cable - Throttle, 81870803 - For Ford tractor models 5640 (16 X 16 Transmission), 6640 (16 X 16 Transmission), 7740 (16 X 16 Transmission), 7840 (16 X 16 Transmission), 8240 (16 X 16 Transmission), 8340 (16 X 16 Transmission), Replaces Ford OEM number 81870803, F1NN9C799CA, F1NN9C799CB, F0NN9C799CA, 81866757, 81866238, Length: 76.968", (Item #: 162000)$22.00
Cable - Throttle, 81870807 - For Ford tractor models 5640 (16 X 16 Transmission), 6640 (16 X 16 Transmission), 7740 (16 X 16 Transmission), 7840 (16 X 16 Transmission), 8240 (16 X 16 Transmission), 8340 (16 X 16 Transmission), Replaces Ford OEM number 81870807, F1NN9C799EA, F0NN9C799EB, 81866759, F0NN9C799EA, 81866242, Length: 38.98", (Item #: 161999)$30.00
Fuel Filter - Spin-on fuel filter element with drain. For 5640, 6640, 7740, 8240, 8340 (Item #: 125844, Ref: F0NN9176BA)$19.90
Fuel Filter Head and Primer - For tractor models 5610, 6610S, 7610S, 7810S, 5640, 6640, 7740, 7840, 8240, 8340, TB80, TB85, TB90, TB100, TB110, TB120. (Item #: 119797, Ref: F1NN9A384AA)$51.00
Fuel Shutoff Solenoid - For tractor models (3230 3/1990 to 9/1993), (3430, 3930, 4630 3/1990 and up), (4830 7/1990 to 5/1994), (5030 10/1992 and up), (5110 5/1984 to 10/1991), (555C, 655C 11/1988 to 8/1993), (555D, 655D, 675D 9/1993 and up), (5610, 6610 1981 to 1993), (5640, 6640, 7840, 8240, 8340 11/1991 and up), (6710 1981 to 9/1985), (6810, 7410, 4/1989 to 10/1991), (755B 1987 to 1/1993), (7610, 7710, 1981 to 10/1991), (L783 7/1988 and up), (L785 4/1983 and up), (L865, L885 10/1994 and up), (LX865, LX885 11/1994 and up). Replaces 83981012, E8NN9D278AA, 9145.040D, 9145040D, 7185900W, 7185-900W, K957417, RE22744, RE54064 (Item #: 119852, Ref: E8NN9D278AA)$16.10
No Picture
Fuel Tank - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340, Replaces Ford OEM number 82008896, E9NN9104AC, 82006122, (Item #: 167894)$820.00
Injector - This new injector is used on Ford Tractors 5610S, 5640, 6610S, 6640, 7010, 7610S, 7740 and Ford Industrials 555E, 575E, 655E, 675E. Replaces original part numbers 81868876, F0NN9F593AA, F0NN9F593AB. (Item #: 112304, Ref: F0NN9F593AA)$86.00
Precleaner Assembly - For tractor models 7000 10/1971-1974, 7600 and 7700 1975-1981, (2310, 2610, 2810, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A, all 1981-2/1990), (5610, 6610, 6710, 7610, 7710, all 1981-1991), (7810, 7910, 8210, 8530, TW5, all 1982-10/1991). Precleaner Assembly, dry for 3 inch pipe. 10 Inch Diameter. Replaces 82926173, 81821684, C9NN9A660C (Item #: 112379, Ref: C9NN9A660C)$37.00
Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A)$9.80
Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Item #: 167626, Ref: C5NN9740A)$8.40
Gauges
Temperature Sender - Temperature Sender, Water. The part may come with a spade terminal which might require changing your wire end. 3/8 Inch NPT Thread.Replaces: 81818428, 83904449, 83904448, 81837742, 83911735, 83948391, 8712608, 82028131, 9712608, D8NN10884AA, E1NN10884AA, 2080406, 3917490, 73403367 (Item #: 128314, Ref: D5NN10884A)$9.70
Hitch / Drawbar
Castle Nut - This is a 1 inch UNF Thread Castle Nut. It is used with E4NNF537AA Lower Link Pin and other applications where a 1 inch UNF thread Castle Nut is needed. It replaces 390767S36, 83958917, 14H920 (Item #: 158239, Ref: 390767S36)$4.30
Draft Control Yoke - Long - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Replaces Ford OEM number D2NN546A, 81827128, (Item #: 155009)$75.54
Drawbar - This Drawbar is used on Ford Tractor (s) 5640 (11/91-later, STD/Tow Hook), 6640 (11/91-later, STD/Tow Hook), 7740 (11/91-later, STD/Tow Hook), 7840 (STD/Tow Hook), 8240 (STD/Tow Hook), 8340 (STD/Tow Hook). Measures: 2.250 Inches Wide, 1.625 Inches Thick 36.250 Inches Long. It has three 1.156 inch diameter front holes at 1.250 inches, 3.250 inches, and 7.750 inches from front. Replaces Ford OEM Number E9NN805AA. (Item #: 159113, Ref: E9NN805AA)$171.44
Hydraulic Lift Rod - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, 8240, 8340 Replaces Ford OEM number C7NN526D, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number 81817891, (Item #: 155016)$34.30
Lift Link Assembly Left Hand - This Left Hand Leveling Box has a 27 mm Slot, Adjusts from 29-36 inches. Used on Ford / New HOlland 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS115, TS80, TS90 Replaces 820013700, 82001371, 82004735, 82021054, 82026902 (Item #: 182986, Ref: 82001371)$195.00
Lower Lift Arm - This lower pull arm is catagory II and can be use on the right or left side. It measures 36 5/8 inches from center of hole to center of hole, 3 15/16 wide and 9/16 inches thick. Replaces D2NN555D, EE8TZ555AA, F0NN555AA, 82023435, 82002013, 81826806. Typically found on models 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7700, 7710, 7740 (Item #: 153318, Ref: D2NN555D)$148.00
Lower Lift Link Pin - Replaces original part number 83949240, E4NNF537AA. It uses 390767S36, 1 inch UNF Thread Castle Nut, not included. (Item #: 170281, Ref: E4NNF537AA)$29.40
Telescopic Bar Hole Stabilizer, Right Hand - For Ford tractor models 600, 700, 2310, 2600, 2610, 2810, 2910, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4200, 4600, 4610, 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8100, 8200, 8210, 8600, 8700, 9200, 9600, 9700, Replaces OEM number FTS15610, Max Length: 28 -3/4", Min Length: 18 -5/16", Additional Handling and Oversize Fees Apply To This Item, (Item #: 169818)$120.00
Hydraulic Pump - Compatible with Ford / New Holland tractors: 5640 (11/91-later), 6640 (11/91-later), 7740 (11/91-later), 7840 (11/91-later), 8240 (11/91-later), 8340 (11/91-later), TS90, TS100, TS110, TS115. Replaces 82850804, F0NN600CE. (Item #: 157821)$3889.01
Hydraulic Pump - For tractor models 5640, 6640, 7740, 7840, 8240, 8340 all with transmission mounted, gear type pump. Replaces 73402660, 81871528, 82983657, 87540839, 87540982, F0NN600BBGV, and K81871528. (Item #: 104220, Ref: F0NN600BB)$500.00
Hydraulic Pump, Auxilliary - This is a New Auxiliary Hydraulic Pump used on 5640, 6640, 7740, 7840, 8240, 8340, LB115 Indust/Const, TS100, TS110, TS115, TS90 (Item #: 157633, Ref: F0NN600AA)$357.00
Hydraulic Pump Gasket - For Ford tractor models 5110, 5610, 5610S, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7810S, 7840, 7910, 8030, 8210, 8240, 8340 Replaces Ford OEM number E0NNB483AB, E0NNB483AA, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS115, TV140, Replaces New Holland OEM number 83925891, 83961380, (Item #: 168809)$9.10
Leverless Hydraulic Coupler, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 345, 445, 530, 545, 545D, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos E9NNR964AB, Replaces Casting nos 530MM-C058, Left Hand, Leverless Coupler, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497969)$291.01
Leverless Hydraulic Coupler, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 345, 445, 530, 545, 545D, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos E9NNR963AB, 81875777, Leverless Coupler, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497968)$291.01
Lever Type Hydraulic Coupler, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5640, 5900, 5910, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 345, 445, 445D, 530, 545, 545D, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos E9NNR964AB, Left Hand, Lever Type Coupler, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497118)$291.01
Lever Type Hydraulic Coupler, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 345, 345C, 345D, 445, 445C, 445D, 530, 530A, 545, 545A, 545D, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos E9NNR963AB, 81875777, Lever Type Coupler, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497119)$291.01
Rock Shaft Bushing - This Rock Shaft Bushing is used on FORD 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710, 5640, 6640, 7740, 7840, 8240, 8340. Associated seal is part number C5NNC944A and is sold separately. Replaces C5NN531A, E2NN531AA, 83933328. (Item #: 170952, Ref: E2NN531AA)$23.10
Rockshaft Seal - This Rockshaft Seal is used with E2NN531AA Bushing. (Item #: 180345, Ref: C5NNC944A)$2.80
Lights
Headlight Assembly with Bulb - For tractor models 5640, 6640, 7740, 7840, 8240. (Item #: 182793, Ref: F0NN13005AB)$52.51
Light Switch - This is a three position light switch used on Ford / New Holland 3430, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8340 (Item #: 178921, Ref: E9NN11654AA)$31.00
Stop Light Switch - For Ford tractor models TW5, TW15, TW25, TW35, 2000, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4140, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5110, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 535 Replaces Ford OEM number D3NN13480A, , Compatible with New Holland tractor models TS90, TS100, TS110, 3010S, 6610S, 6810S, 7610S, Replaces New Holland OEM number 81834441, (Item #: 160571)$20.90
Hydraulic Valve - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8560, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 345C, 345D, 445C, 445D, 530A, 545C, 545D, Compatible with New Holland tractor models TS90, TS100, 6810S, 7010, 7610S, 8010, Replaces OEM number 81864874, 82988269, E2NNB950AC11B, E9NNB950BB, (Item #: 121955)$806.00
Hydraulic Valve, Single Spool, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7800, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335 Replaces Ford OEM nos 81864873, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, Replaces New Holland OEM nos 81864873, 82988268, Single Spool, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497970)$510.01
Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 5030, 8530, 8630, 8730, 8830, 5640, 6640, 7740, 7840, 8240, 8340, 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3400, 3500, 4110LCG, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555E, 655, 655A, 655C, 655D. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Item #: 153774, Ref: D8NN9278BD)$7.87
Oil Pump - The following Ford / New Holland models used this oil pump: 5610, 5640, 6610, 6640, 6810, 7610, 7740, 9030, 555, 555E, 575, 575E, 655, 675, 675E, TB100, TB110, TS90, TS100, TS110, 5640, 6640, 7010, 7740, LS190, LX985, LB90, LB110, LB115. Replaces OEM numbers 81868537, E9NN6600AB, E9NN6600AA, 83999182 (Item #: 121916)$83.98
Driven Gear - This is the 540 RPM Driven Gear for a two speed. For 540/1000 RPM two speed Independent PTO System. It has 70 and 8 teeth. Replaces 83927911, E0NNA726AB, E0NNA726AD. (Item #: 163803, Ref: E0NNA726AD)$313.00
Dual Power/ PTO Disc - This Dual Power/PTO Disc measures 5.84 inches outside diameter, 4.500 inside diameter with 52 teeth. It replaces original part numbers C9NNP743A, C9NNP743D, D3NNP743A, 81822308, 81830023, 81830026. (Item #: 109833, Ref: C9NNP743D)$13.60
Gear, IPTO Driven - Used in two speed, independent PTO tractors, this gear is used in the 1000 RPM setting. It has 8 splines and 84 helical teeth. Used on Ford / New Holland models: 5110, 5610, 5610S, 5640, 5900, 6410, 6610, 6610S, 6640, 6710, 6810, 7010, 7410, 7600, 7610, 7610S, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, TS100, TS110, TS120A, TS90. Replaces E0NNA726BA, 83926452 (Item #: 163802, Ref: E0NNA726BA)$378.00
PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283)$4.10
PTO Clutch Plate - This is a Steel PTO Clutch Plate. It measures 6.062 inches outside diameter, 4.448 inch inside diameter and has 60 teeth. It replaces original part numbers 81808607, D6NNC730A, PBB77573A, PBB77573AA, 1102-5506, 81565601. (Item #: 104211, Ref: PBB77573A)$5.30
PTO Drive Gear - 1000 RPM, Used - For Ford tractor models 5610 (1981-10/1991), 5610S (1/1994-later), 5640 (Non-Shiftable 11/1991-later), 6610 (1981-10/1991), 6640 (Non-Shiftable 11/1991-later), 6710 (1981-10/1991), 7610 (1981-10/1991), 7710 (1981-10/1991), 7740 (Non-Shiftable 11/1991-later), 7810 (Non-Shiftable 1982-10/1991), 7840 (Non-Shiftable 11/1991-later), 7910 (Non-Shiftable 1982-10/1991), 8210 (Non-Shiftable 1982-10/1991), 8240 (Non-Shiftable 11/1991-later), 8340 (Non-Shiftable 11/1991-later) Replaces Ford OEM number E0NNA726BA, , Compatible with New Holland tractor models 5610S, 6610S (1/1994-later), 6610S, 7010S (4/1996-later), 7610S (1/1994-later), 7610S, 1000 rpm, Teeth: 84, Helical, Splines: 8, For a new version of this item use Item #: 163802, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436357)$191.01
PTO Drive Gear, Used - For Ford tractor models 5610, 5610S, 5640, 6610, 6640, 6710, 7610, 7710, 7740, 7810, 7810S, 7840, 7910, 8210, 8240, 8340, Replaces Ford OEM number E0NNA726AD, Teeth: 70, Splines: 8, For a new version of this item use Item #: 163803, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436358)$181.01
PTO Driven Gear - This gear has 20 and 41 teeth. It is used with 540/1000 RPM two speed independent PTO. Replaces original part numbers E0NN745AA, 83924763. (Item #: 166637, Ref: E0NN745AA)$274.00
PTO Drive Plate - This PTO Drive Plate has 20 splines. If you need 15 splines, order C5NNN777A. Used on 5000, 5600, 5610, 5610S, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8000, 8010, 9000. Replaces E1NNN777AB, E2NN777AA (Item #: 104264, Ref: E1NNN777AB)$72.00
PTO Shaft Support - Support, for PTO Shaft and Drive Clutch Valve. DOES NOT have relief oil hole in support. For tractor models 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces original part numbers C2NNN776A, D2NNN776A and 81826819. (Item #: 111897, Ref: D2NNN776A)$22.80
Gas Strut Spring Cylinder, Roof Hatch - For Ford tractor models TW5, TW15, TW25, TW35, 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8360, 8530, 8560, 8630, 8730, 8830 Replaces Ford OEM number E4NN94502R28AA, , Compatible with New Holland tractor models TM115, TM125, TM135, TM150, TM165, TS90, TS100, TS110, TS115, 8160, 8260, 8360, Replaces New Holland OEM number 83949895, Rod Diameter: 0.315", Cylinder Diameter: 0.709", Piston Length: 2.559", Overall Length: 8.268", (Item #: 114562)$21.80
Grill Assembly, Left Side - Constructed exactly like the original, this Left side Grill Assembly is used on Ford models 6610, 6640, 7740. Replaces original part number 81875285 (Item #: 163972, Ref: 81875285)$239.00
Grill Assembly, Left Side - Constructed exactly like the original, this Right side Grill Assembly is used on Ford models 6610, 6640, 7740. Replaces original part number 81875284 (Item #: 158312, Ref: 81875284)$179.00
Weight Bracket - For Ford tractor models TW5, TW10, TW15, 3000, 3230, 3430, 3910, 3930, 4030, 4130, 4230, 4600, 4610, 4630, 5000, 5030, 5610S, 6600, 6640, 7700, 7740, 7840, 8210, 8240, 8530, 8630, Compatible with New Holland tractor models TB100, TB110, TB120, TS6030, TT55, TT75, 4230, 5640, 6610S, 6640, 7610S, 7740, 7840, 8240, 8340, Holds 10 of weight no. 119699, Holds 10 of weight no. 128773, Weight: 44 lbs, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128790)$220.00
Steering
Axle Pivot Bushing - On Carraro 4WD front ends, this the outer most bushing on the pivot assembly. Measures 135mm outside diameter, 124mm inside diameter, 42 mm wide. This part replaces OEM part numbers CAR1234751, CAR123475, 83971641, 9968007, 83957129, 337255A1 (Item #: 156147, Ref: CAR1234751)$41.00
Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730)$3.80
Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751)$92.58
Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B)$16.98
Drive Shaft Coupling - Used on Mechanical Four Wheel Drive front ends, this part replaces OEM numbers: 81862966, 81873108, 82006339, 82005107, E9NN4684BA12B, F1NN4684AA12B (Item #: 156168, Ref: F1NN4684AA12B)$43.25
Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651)$79.00
Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715)$9.00
Front Axle O-Ring - Many Carraro 4WD front axle equipped use this o-ring at the front of the pivot assembly. This part replaces OEM numbers 83957130, 83959520, CAR28556, N805193S91, 85807958, K965267, 28103 (Item #: 156146, Ref: CAR28556)$1.20
Front Axle Pin - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340, Replaces Ford OEM number F0NN3126AA, Replaces New Holland OEM number 81863636, 82003062, (Item #: 154913)$100.00
Front Axle Sleeve - Used on the pivot pin assembly on Carraro 4WD front axles, this bushing measures 115mm inside diameter, 125mm outside diameter, and 44mm wide. Replaces OEM numbers 09968010, 83957128, 83961191, 337253A1, 9968010, CAR123476, CAR124592 (Item #: 156145, Ref: CAR124592)$111.78
Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776)$54.31
Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 381410A1, 47110070, 6914496, 6190247M1, CAR116962, D142950, 85807965, 82848085, 195207A1, 1-33-741-643, D142950, 3541401M1 (Item #: 156141, Ref: CAR116962)$5.80
Half Shaft Bushing - This bushing is closest to the wheel on the Carraro front axle shaft. Replaces OEM numbers 09968019, 109972, 5194292, CAR109972, 83930156, 9968019, 1967535C1, 05194292 (Item #: 156143, Ref: CAR109972)$14.87
Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675)$9.60
Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1)$57.00
King Pin - Used in Mechanical Four Wheel Drive front axles, this part replace OEM numbers CAR118526, 83952503, N13504 (Item #: 156167, Ref: CAR118526)$90.00
Kingpin - MFWD Lower - For Ford / New Holland tractors with Mechanical Four Wheel Drive: 345C, 345D, 445, 445A, 445C, 445D, 450, 455C, 455D, 545, 545A, 545D, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 250C, 260C, 4610N, 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340. This part replaces OEM numbers 83952503, CAR118526, 3475348M1, 153326212, 137700410835, N13504 (Item #: 156167, Ref: 83952503)$90.00
Kingpin - MFWD Upper - For Ford / New Holland tractors with Mechanical Four Wheel Drive: 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340. This part replaces OEM numbers 1995414C1, 81863173 (Item #: 129293, Ref: 81863173)$118.00
King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726)$27.60
King Pin Thrust Bearing - Used on Carraro 4WD Axles, this King Pin Thrust Bearing (Trunion Bearing) replaces OEM numbers 5119699, 05119699, TX51785, OSA 206S, OSA206S (Item #: 156139, Ref: 5119699)$112.00
King Pin Thrust Bushing - Used on several Carraro 4WD front ends, this bushing replaces OEM numbers CAR123641, 83982431, 9967999, 09967999, 3541400M1, N14372 (Item #: 156137, Ref: CAR123641)$32.00
King Pin, Upper - Used on the upper side of the hub on mechanical four wheel drive the King Pin (trunion) replaces OEM numbers 1995414C1, 81863173, CAR125149 (Item #: 129293, Ref: CAR125149)$118.00
Planetary Gear - For Ford tractor models 5640, 6640, 7530, 7740, 7840, 8160, 8240, 8260, 8340, Compatible with New Holland tractor models T6010, T6020, T6030, T6040, T6050, T6060, T6070, T6080, TM115, TM120, TM125, TM130, TM135, TM140, TS90, TS100, TS100A, TS110, TS110A, TS115, TS115A, TS125A, TS130A, TS135A, Replaces New Holland OEM number 5145501, (Item #: 156055)$88.00
No Picture
Planetary Sun Gear, Used - For Ford tractor models 5640, 6640, 7530, 7740, 7840, 8160, 8240, 8260, 8340, Compatible with New Holland tractor models T6010, T6020, T6030, T6040, T6050, T6060, T6070, T6080, TM115, TM120, TM125, TM130, TM135, TM140, TS90, TS100, TS100A, TS110, TS110A, TS115, TS115A, TS125A, TS130A, TS135A, Replaces New Holland OEM number 5145501, For a new version of this item use Item #: 156055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455942)$66.01
Power Steering Cylinder - This Power Steering Cylinder is used on Ford 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. It replaces original part numbers E9NN3A540BC, 81869701. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Item #: 156775, Ref: E9NN3A540BC)$344.00
Power Steering Cylinder End - 2.875" to Center - For Ford tractor models 5640, 6640, 7740, 7840, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number 81864115, E9NN3N981AA, Dimension A: 2.875", Dimension B: 1.250" - 12 Right Hand Thread, (Item #: 104651)$35.00
Power Steering Cylinder Repair Kit - This Power Steering Cylinder Repair Kit is used with E3NN3A747AA shaft. It replaces 83949861, EFPN3301A, EFPN33301A (Item #: 155404, Ref: EFPN3301A)$38.00
Power Steering Cylinder Shaft - This Power Steering Cylinder Shaft is used on 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. Use with EFPN3301A repair Kit. It replaces original part number E3NN3A747AA and 83948961 (Item #: 180247, Ref: E3NN3A747AA)$115.00
Power Steering Cylinder Shaft - This Power Steering Cylinder Shaft is used on 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. Use with EFPN3301A Seal Kit. Replaces original part number E9NN3A747AA (Item #: 179353, Ref: E9NN3A747AA)$132.80
Spindle Bushing - This is a Lower Spindle Bushing used in multiple Ford Tractors. Measures 1.94 inches ID, 2.06 inches OD, and 1.75 inches long. Replace original part numbers C0NN3110A and 81812242. (Item #: 100243, Ref: C0NN3110A)$10.10
Spindle Right Hand/LH - This Spindle is for both left hand or right hand sides and has a vertical shaft of 9.40 inches long. For models 6640, 7740. The wheel bearing kit used for this spindle is part number WBKFD6. (Item #: 104551, Ref: E9NN3105CB)$287.00
Spindle Right or Left Hand - Spindle, left hand or right hand, vertical shaft 12 inches long. For tractor models 5640, 6640, 7740, 7840. Replaces 81864055, 87316431, and E9NN3105EB. The wheel bearing kit used for this spindle is part number WBKFD6. (Item #: 104548, Ref: E9NN3105EB)$136.00
Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A)$7.40
Steering Arm, Left Hand - This Steering Arm is used on 2 wheel drive tractors 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340, T6010, T6020, T6030, TS100, TS100A, TS110, TS110A, TS115A, TS90. Replaces 81864063, 81868812, 82003635, 82029584, E9NN3131AA (Item #: 160493, Ref: E9NN3131AA)$60.00
Steering Arm, Right Hand - This Steering Arm is used on 2 wheel drive tractors 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340, T6010, T6020, T6030, TS100, TS100A, TS110, TS110A, TS115A, TS90. Replaces Original Part numbers E9NN3130AB, 82003634, 81868813, 81864060, 82029585, E9NN3130AA (Item #: 160492, Ref: E9NN3130AA)$55.00
Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586)$2.20
Steering Valve, F0NN3A244BA, 81863600 - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340 Replaces Ford OEM number F0NN3A244BA, , Compatible with New Holland tractor models TS90, TS100, TS110, TS115, 5640, 6640, 7740, 7840, 8240, 8340, Replaces New Holland OEM number 81863600, (Item #: 154888)$722.00
Steering Wheel - Replacing Ford New Holland part numbers 81862887, 82016844, F0NN3600AA, this steering wheel is 15 inches in diameter, with a splined hub and 3 spokes. Used on Ford / New Holland models: 5640, 6640, 7740 (Item #: 168584, Ref: F0NN3600AA)$79.00
Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062)$73.00
Thrust Washer - Used on the pivot pin assembly on some Carraro 4WD axles, this thrust washer replaces OEM numbers 1-33-741-646, 83957128, 09968006, 83961192, 9968006, CAR124591, CAR123476 (Item #: 156144, Ref: CAR123476)$40.00
Tie Rod - For Ford tractor models 5640, 6640, 7740, 7840 Replaces Ford OEM number E9NN3278AA, , Compatible with New Holland tractor models TS90, TS100, TS110, Replaces New Holland OEM number 81864106, Dimension A: 19.870", Dimension B: 1.250", (Item #: 104654)$99.00
Tie Rod Assembly - This Tie Rod Assembly is 54.500 inches with M20x1.0mm threads one the ends. Replaces 5109553, 5168933 (Item #: 104650)$242.00
Tie Rod Center - Measuring 8.20 inches overall, with M22 X 1.5 Right Hand thread on one side and M24 x 1.5 Right Hand thread on the other. For the following FORD models: 5640, 6640, 7630, 7740, 7840, 7910, 8030, 8210, 8240, 8340, LM500, TW15, TW25, TW5. Replaces ZP0750125010, ZP0501205010, ZP0501205167, 9968015, CAR49013, 83962754, 9968018, 83957096, 83957792, 48038758, 1429647. (Item #: 128527, Ref: AL80542)$73.00
Tie Rod End, E9NN3289AA, 81864100 - For Ford tractor models 5640, 6640, 7740, 7840, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number E9NN3289AA, 81864100, Dimension A: 5.000", Dimension B: 1.125" - 16 UN2A Thread, (Item #: 104655)$38.00
Tie Rod End, Economy - Left Hand - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340, Replaces Ford OEM number 81863218, CAR121925, Replaces Carraro manufacturer number 121925, Fits Left Hand Side, (Item #: 104648)$245.00
Tie Rod End, Economy - Right Hand - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340, Replaces Ford OEM number 81863221, CAR121924, 8186335, CAR49021, Replaces Carraro manufacturer number 121924, Right Hand Tie Rod, Length 9.500", M24 X 1.5 Left Hand Thread, (Item #: 104647)$222.42
Tie Rod End, RH - This Tie Rod End is used on Ford New Holland 5640, 6640, 7740, 7840, 8240, 8340. It is 9.50 inches from center of the ball joint to the end. M24 X 1.5 LH Thread. It replaces CAR48978, CAR121924, E49590, 48084972, 132665A1, 87714470, 81863221, 81878547 (Item #: 156170, Ref: CAR48978)$144.00
Universal Joint - Many mechanical four wheel drive front axles use this universal joint. This part has 27mm cup diameter and is 70.9mm across (1.063 X 2.791 inches). Replaces OEM numbers 247543A1, 81882C1, 1-33-742-629, 137700420872, 144461A1, 137700420874, 195215A1, 337260A1, D149733, B507526, CAR40869, N14156, N14411, 9968059, 84355357, 85807283, 84990205, 9970163, 85805996, 87306931, CAR40889, 81874740, 85805996, 9968059, 09968059, 1-33-742-629, CAR40825, 84355357, AL71316, RE212902, ABP3002508, 508360, ABP3004431 (Item #: 158432, Ref: CAR40825)$44.24
Yoke - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340 Replaces Ford OEM number E9NN4851AA, , Compatible with New Holland tractor models TS90, TS100, TS110, Replaces New Holland OEM number 81862977, (Item #: 156126)$257.54
Yoke and Shaft Assembly - Used on Carraro 4WD front ends, this shaft and yoke assembly replaces OEM part numbers N14156, 195214A1, 40821, 137700420874, 3476312M1, 137700420870, 153326679, D149733, CAR40890, 9968061, 81879C1, 81882C1, N14409, CAR40844 (Item #: 156154, Ref: CAR40844)$128.00
Yoke Housing - Used between the two halves of the axle assembly on Carraro front ends, this part replaces OEM part numbers 390029A1, 195213A1, 1-33-742-732, 144461A1, 144464A1, 247544A1, 81880C1, 81882C1, 85827070, 1-33-742-683, 1-33-742-628, 85805995, 81874741, 87760408, 87772059, CAR519056, CAR046196, CAR40835, CAR46196, CAR40826 (Item #: 154456, Ref: CAR40826)$78.00
Wheels
15" X 28" 8 Loop Rim, Used - For Ford tractor models TW5, TW15, TW25, TW35, 5610, 5640, 6610, 6640, 7740, 7840, 7910, 8210, 8240, 8340 Replaces Ford OEM nos 82008774, , Compatible with New Holland tractor models TS110, TS115, Replaces New Holland OEM nos 82008774, 4 Set for double loops, Color: White, 15X28, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429860)$375.01
Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186)$146.00
Front Wheel Bearing Seal - This seal measures 2.047 inches inside diameter, 2.953 inches outside diameter, 0.354 inches wide. It replaces part numbers C5NN1190E, C5NN1190B, 83924930, 82964655, 83902586, 83958356, 83956524, 81823079, D8NN1190CA, E0NN1190AA, D8NN1190AA (Item #: 112061, Ref: E0NN1190AA)$5.10
Front Wheel Hub - 6 Bolt - For Ford tractor models 5000, 5100, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, Replaces Ford OEM number C9NN1104D, 6 bolt, (Item #: 100663)$52.00
Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166)$70.00
Hub Cap, Cast Iron - This is a threaded, Cast Iron Hub Cap, used on Ford / New Holland 3010S, 4010S, 5000, 5110, 5190, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8210, TS100, TS110, TS90. Replaces C5NN1130A, 81811270, 81802363 (Item #: 100664, Ref: C5NN1130A)$6.00
Hub Cap, Stamped Steel - This is a threaded, Stamped Steel Hub Cap, used on Ford / New Holland 3010S, 4010S, 5000, 5110, 5190, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8210, TS100, TS110, TS90. Replaces C5NN1130A, 81811270, 81802363 (Item #: 167593, Ref: C5NN1130ASS)$6.10
Orbital Steering Motor Seal Kit - For Ford tractor models 5640, 6640, 7740, 7840, 8240, 8340 Replaces Ford OEM number 9966147, 82010262, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS115, (Item #: 164487)$79.00
Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H)$4.20
Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1)$19.50
Rim Clamp, Used - For Ford tractor models 3230, 3430, 3930, 4000, 4030, 4100, 4110, 4130, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8240, 8340, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos 81821553, Replaces Casting nos C9NN1043F, For Power Adjust Wheels, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497001)$37.01
Rim Stop Screw - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9600, 9700, Compatible with Ford Construction and industrial models 256V, 276, Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 81811263, C0NN1058A, Screw for stop body, Use with power adjust rims PAR10X28, C5NN1050J, and C5NN1050H, Rear rim stop screw, (Item #: 151948)$7.70
Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.516 inch outside diameter, 0.78 inch inside diameter, 0.089 inch thick. It replaces original part numbers C5NN1N195A, 81811561, 9N1195. (Item #: 164443, Ref: C5NN1N195A)$3.40
Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195)$1.50
Wheel Hub Kit - For Ford tractor models 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6640, 6700, 6710, 6810, 7000, 7100, 7600, 7610, 7700, Replaces Ford OEM number C9NN1104D, C5NN1130A, E2156T9, EHPN1200D, C5NN1107F, (Item #: 113372)$86.00
Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E)$3.60
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Cooling System
Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A)$5.20
Decals and Emblems
Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825)$15.87
Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN)$20.90
Drive Train
Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A)$10.00
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$84.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.10
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$55.00
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467)$18.50
Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994)$11.70
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Pistons and Sleeves
No Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK)$64.99
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.10
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.10
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231)$12.60
Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346)$5.60
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.92
Gauges
Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC)$7.00
No Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 9N5182)$44.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L)$20.50
Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R)$24.50
Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD)$15.20
Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C)$24.00
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6)$119.41
Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061)$22.00
Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340)$37.00
Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002)$22.50
Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002)$29.50
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023)$25.70
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315)$65.00
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199)$21.10
Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z)$770.00
Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB)$585.00
Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030)$787.98
LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169)$70.00
LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142)$29.20
Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP)$55.00
Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103)$276.00
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$16.10
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$16.10
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$183.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$123.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$51.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Lights
Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V)$56.00
Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R)$16.60
No Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670)$24.50
Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A)$16.50
Miscellaneous
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190)$118.00
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT)$50.00
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL)$56.00
No Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT)$23.50
No Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP)$7.30
No Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL)$82.00
No Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP)$11.60
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP)$8.30
No Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP)$7.90
No Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL)$57.00
No Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT)$23.50
No Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP)$8.50
No Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT)$22.10
No Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP)$8.80
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$62.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$17.00
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL)$92.00
No Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT)$38.00
No Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP)$10.50
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
NOTE
PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.
NOTE
PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F)$51.00
PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F)$73.00
PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F)$76.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK)$59.00
Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013)$36.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS)$14.30
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166)$100.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166)$70.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.50
No Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$67.00
Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1)$18.10
Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A)$112.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
