FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 800 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Item #: 125733, Ref: H2092) $8.90

Brake Anchor Pin Retainer, Pack of 2 - This brake anchor pin retainer is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964) (Item #: 192534, Ref: NCA22286A) $16.30

Brake Back Plate Dust Seal - This brake back plate dust seal is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Item #: 185115, Ref: NCA2217A) $9.50

Brake Camshaft Hole Cover Spring - This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Item #: 178191, Ref: 8N2322) $4.30

Brake Cross Shaft Bushing - Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Item #: 178169, Ref: 782477) $7.70

Brake Drum - ***USE PART NUMBER NCA1126A *** For tractor models 2000, 4000, 4110 with L/Differential Lock 1965 thru 3/1968. Also for 600, 601, 700, 701, 800, 801, 900, 901 all after 1954. AN ADDITIONAL $12 shipping will be added to your order due to weight of item. (Item #: 105493, Ref: 86533415) $115.00

Brake Drum - This cast iron brake drum is for tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10/1965). Replaces 86533415, NCA1126A. (Item #: 105493, Ref: NCA1126A) $115.00

Brake Drum Retaining Screw Set - For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981, Replaces Ford OEM number 24667S, 24667S8, Set of 4, Order two sets per tractor, 3/8" -16 x 3/4", For Individual Screw use Item #: 125738, (Item #: 185398) $2.20

Brake Drum Screw - Single drum screw of 3/8 inch-16 x 3/4 inch screws. Order quantity of 4 for complete kit. Used on 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981. Order 2 sets per tractors. (Item #: 125738, Ref: 24667) $1.10

Brake Repair Kit - This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. Replaces: (4) Spring Clip: 6H2066, (1) Adjuster Socket: 8N2048, (1) Adjuster Nut: 8N2223, (1) Adjuster Screw: H2041, (1) Felt: NCA2217A, (2) Collar : NCA22218A, (2) Retainer Pin: NCA22276A, (2) Clip: NCA22286A, NCA2250, (1) Spring: NCA2296B, (2) Pins: NCA2333A, (2) Spring: NCA2204A, NCA22275A, NCA22219A (Item #: 105515, Ref: NCA2250) $48.00

Brake Shoe Adjusting Screw Spring - Must order 2. Price is for each. This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Item #: 182025, Ref: NCA22219A) $8.50

Brake Shoe Anchor Pin - This brake shoe anchor pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185113, Ref: NCA2333A) $4.60

Brake Shoe Anchor Pin Collar - 1 inch outside diameter, 3/4 inch inside diameter, 9/16 inches wide. This brake shoe anchor pin collar is for tractor models: 501, 600, 601, 700, 701, 800, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185533, Ref: NCA22218A) $1.80

Brake Shoe Hold Down Spring Pin - Priced for 1, must order 2 - This brake shoe hold down spring pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185118, Ref: NCA22276A) $1.20

Brake Shoe Retracting Spring - This brake shoe retracting spring is for tractor models 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Item #: 114882, Ref: NCA2296B) $17.10

No
Picture
Brake Shoe Return Spring - For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (all 4 cylinder 1955-'64), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NCA2204A, (Item #: 182026) $6.40

Brake Shoe Return Spring, RH Brake - This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Item #: 178084, Ref: NCA2204A) $6.80

Brake Shoe with Lining, Pack of 2 Shoes - This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 to 1964). (Item #: 105488, Ref: NCA2218B) $42.00

Parking Brake Lever - For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Item #: 126597, Ref: NAA2782A) $23.00

Clutch

Clutch Alignment Tool - 1-3/8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Item #: 119892, Ref: 1112-5996) $10.70

Clutch Alignment Tool - .655" x 15 Spline - For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 840, 850, 851, 900, 901, 941, 950, 951, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 5010, Compatible with Ford Construction and industrial models 1801, 1821, 1841, Tool For 1" 15 Spline Disc Using .655" ID Pilot Bearing, (Item #: 119884) $11.50

Clutch Disc - Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Item #: 111601, Ref: 91A7550WHD) $29.10

Clutch Disc - This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3/8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Item #: 113378, Ref: NCA7550A) $77.00

Clutch Disc - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NCA7550A, 313299, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 169785) $63.00

Clutch Disc, 9 inch - Clutch Disc: 9 inch Organic, Spring Loaded, 15 Splines, 1 inch Hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Item #: 130147, Ref: E8NN7550GA) $80.00

Clutch Disc, Remanufactured - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206192) $86.01

Clutch Disc, Remanufactured - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206193) $86.01

Clutch Disc, Remanufactured, D8NN7550FA, 82006019 - For Ford tractor models Dexta, Super Dexta, 600, 601, 800, 801, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number D8NN7550FA, F0NN7550FA, E8NN7550GA, Replaces New Holland OEM number 82006019, 86640504, 86640503, 960E7550, Clutch Size: 9", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Springs, Clutch Type: Woven, For a New version of this sku use Item #: 130147, (Item #: 204475) $75.50

Clutch Disc, Remanufactured, NDA7550B - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NDA7550B, Clutch Size: 10", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206191) $88.50

Clutch Fork, 8N7511B - Clutch fork, 8N7511B, for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). (Item #: 1028103) $47.00

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Item #: 178203, Ref: 352581S8) $2.10

Clutch Kit - This new dual stage, 9 inch clutch kit contains a 9 inch, 15 Spline Drive Disc with 29 Spline Double Pressure Plate Assembly (311435). Includes Pilot Bearing (C5NN7600A) and Release Bearing (83914247). The pressure plate assembly is larger than the 9 inch captive discs. Note: Pilot Tool is not included and not needed in this kit. For live PTO Double Clutch Models (1955 to 1964). This clutch kit is used on tractor models: 600, 700, 800, 900, 2000 4 cylinder, 4000 4 cylinder, Dexta, Super Dexta. (Item #: 112330, Ref: 311435K_) $440.00

Clutch Kit 10 Inch - This 10 inch Single Clutch Kit has a 10 inch 10 Spline on a 1 3/8 inch hub Spring Drive Disc NCA7550A, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool. This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900 (1953 to 1957). Fingers do not have counter-weights. (Item #: 114298, Ref: 1112-5987) $181.00

Clutch Kit, 10 Inch, Single Clutch - Kit contains new 10" pressure plate assembly (8-springs), NEW 10" DISC (15 spline, 1" hub), release bearing, pilot bearing. For the following tractors with 4 or 5 speed transmission 1953-1964): 600, 620, 630, 640, 650, 601, 611, 621, 631, 641, 651, 700, 740, 750, 701, 741, 800, 820, 840, 801, 811, 821, 841, 851, 900, 950, 901, 941, 951, 2000, 4000. (Item #: 119868, Ref: NDA7563ANC) $170.00

Clutch Kit, 10 Inch, Single Clutch - This 10 inch Single Clutch Kit has a 10 inch 15 Spline on a 1 inch hub Spring Drive Disc E8NN7550FA, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool (not shown). This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900, 1841, 2000 4 cylinder, 4000 4 cylinder. (Item #: 119868, Ref: NDA7563AK) $170.00

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Item #: 121833, Ref: 8N7563K) $115.00

Clutch Kit, Remanufactured - For Ford tractor models Dexta, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Clutch Diameter - 9", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Spring or Solid, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 6, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-7/8", Pressure Plate Splines - 29, (Item #: 202041) $470.01

No
Picture
Clutch Kit, Remanufactured - For Ford tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2031, 2111, 2130, 2131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Clutch Diameter - 10", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 10", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Type - Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202045) $182.01

Clutch Release Arm Kit - This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Item #: 182518, Ref: S.66657) $98.95

Clutch Release Shaft, Used - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 620, 621, 630, 640, 641, 650, 660, 700, 701, 740, 741, 800, 801, 820, 840, 841, 850, 860, 900, 950, 960, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 4040, 4140, Replaces Ford OEM number B7510A2, For a new version of this item use Item #: 183687, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459482) $13.01

Clutch Release Throw Out Bearing - Greaseable - Compatible with Ford Tractor(s) NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 4000, 4100, 4110, 4410, 4600, 4600SU I.D.: 2.0625" O.D.: 3.562" Thickness: .812" Replaces Ford OEM nos C7NN7580A, C0NN7580A, E1ADKN7580B (Item #: 113482) $19.10

Clutch Shaft Bushing - This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Item #: 178029, Ref: 407508A) $7.90

Eyebolt, Clutch - For Ford tractor models NAA, 8N, 600, 700, 800, 900, Replaces Ford OEM number 355584S8, 7/16" x 20 x 2.68, (Item #: 166065) $14.30

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate - This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Item #: 172898, Ref: 8N7563) $92.00

Pressure Plate - For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a Remanufactured version of this sku use Item #: 204476, (Item #: 135034) $496.00

Pressure Plate, 10 Inch, Single Clutch - This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Item #: 172999, Ref: B8NN7563A) $154.00

Pressure Plate Assembly, Remanufactured, 09A7563, 8N7563 - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 900, 901, 941, 950, 951, Replaces Ford OEM number 09A7563, 8N7563, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, (Item #: 205807) $78.01

Pressure Plate, Remanufactured, 957E7502B - For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 135034, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204476) $402.87

Pressure Plate, Remanufactured, NDA7563A - For Ford tractor models NAA, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 2030, Replaces Ford OEM number NDA7563A, 86640482, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 204582) $95.01

PTO Disc - 9.062 inch included with pressure plate, rigid disc, organic, 1.875 inch spline diameter, 29 spline. For tractor models 600, 800, 900, Super Dexta. Replaces E55GC9, 83916953, F0NN7550EA, 82006018 (Item #: 178428, Ref: 323033516) $147.00

Release Bearing - Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, 0.8700 inches wide. This is used in multiple Ford Tractors. Replaces original part numbers NDA1585, NDA7580, NDA7580B, D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $22.50

Release Bearing - This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Item #: 107007, Ref: N1087) $18.50

Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Item #: 163512, Ref: 9N7561) $41.00

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Item #: 121564, Ref: 9N7562) $7.00

Cooling System

Fan, 5 Blade - Measure before ordering. Many of the models listed used more than one size fan. This fan measures 16 inch diameter, 0.625 inch pilot hole, and a 1.75 inch bolt circle (around the perimeter). Used on Ford tractors 1955-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 500, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 900, 901 (Item #: 163821, Ref: F8JL8600CA) $183.00

Fan Belt - This fan belt fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Some of these tractors used more than one type of belt. Verify part number before ordering. (Item #: 116686, Ref: EAF8577A) $8.40

Fan Blade, 3 Blade - This 3 blade fan measures 16 inches in diameter. Fits tractor models: 501, 600 Series, 601 Series, 800 Series, 801 Series, 900 Series, 901 Series, 2000, 4000 1955 to 1964. 4 cylinder gas. 3.120 inch bolt circle, .625 inch pilot hole. USED WITH WATER PUMPS CDPN8501C and DCPN8501A. May come painted black, primer gray or primer red. (Item #: 100771, Ref: NCA8600S) $40.60

Fan Blade, 6 Blade - This 6 blade fan is for tractor models 2000, 4000, 600, 800, 900. This 6 blade fan has a .5 inch pilot hole, 3.15 inch 4 hole mounting center, 15.5 inch outside diameter. (Item #: 155378, Ref: NCA8600B) $73.00

Fan Blade, 6 Blade, Pusher - 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Item #: 114598, Ref: JE8600A) $92.00

Fan Shroud - For tractor models 501, 541, 600, 601, 611, 621, 700, 800, 900, NAA, (2000, 2110, 2120, 4000, 4110 All before 1964), 2111, 4120, 4121. (Item #: 109990, Ref: NCB8146A) $78.00

Fan Shroud - This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Item #: 109990, Ref: NCA8146A) $78.00

Fan Shroud Hardware Kit - This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Item #: 178200, Ref: 357622-K) $5.60

Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964 4 cylinder tractors, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1/4 inches. Note, the draincock on this ratiator is on the lower front. This might interfere with narrow front end and indusctial models. If your draincock is located on a cast lower outlet pipe, order 135045 (Item #: 101693, Ref: C5NN8005ABECON) $220.00

Radiator - This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B. (Item #: 135045, Ref: C5NN8005AB) $315.00

Radiator Cap - This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Item #: 108081, Ref: 1T8100A2) $10.00

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Item #: 178164, Ref: 608287) $3.80

Radiator Hose, Lower - This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 108082, Ref: 312588) $5.20

Radiator Hose, Lower - This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Item #: 182499, Ref: 313151) $14.20

Radiator Hose, Upper - This upper radiator hose is for tractor models NAA, Jubilee, 600 series, 700 series, 800 series, 900 series, 2000 4-cylineder, 4000 4 cylinder Series. It can replace 310048. This hose measures 7 3/8 inches long, 1 1/2 inch outside diameter and 1 3/16 inside diameter. (Item #: 108083, Ref: NAA8260B) $3.40

Radiator Mounting Bolt Kit - These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Item #: 182536, Ref: 351641S8) $8.30

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.40

Thermostat - This thermostat is 160 degree lo-temp. For gas engines 1953 to 1964. For gasket, order 191970 (Item #: 113939, Ref: EAF8575BWG) $14.00

Thermostat Housing - This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Item #: 160754, Ref: 310031) $53.00

Water Pump Cover Plate Gasket - For all 4-cylinders 1953-1964. Price is for each. (Item #: 156680, Ref: EAF8507B) $3.00

Water Pump Kit - This water pump repair kit is for Water Pump CDPN8501C used on 4 cylinder gas engines on tractor models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Item #: CPN8591B) $42.00

Water Pump Mounting Gasket - Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Item #: 150390, Ref: EAF8513A) $2.90

Water Pump Replacement Kit - Kit includes CDPN8501C water pump with press on pulley, 312588 lower hose, NAA8260B upper hose, EAF8577A fan belt, hose clamps, gasket, and clamp key. It is used on Ford 134 and 172 cubic inch engines in models from 1955-1964 with manual steering. YTO-119845 (Item #: 185544, Ref: 119845) $94.00

Water Pump Replacement Kit - Kit includes CDPN8501C water pump with gasket, NAA8260B upper hose, 313151 lower hose, 2- EAF8577A fan belts (one for generator one for power steering Pump), 4 hose clamps, and clamp key. This kit is used on Ford tractors, 1955-1964, with 134, 144 and 172 cubic inch 4 cylinder engines and power steering (factory or added). YTO-119846 (Item #: 185546, Ref: 119846) $100.00

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Item #: 178141, Ref: PRM77BR) $10.60

Water Pump - uses Bolt-On Pulley - This water pump uses the bolt on style pulley, which does not come with the water pump and is not available. For tractor models 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172 inch industrial gas and diesel engines (Item #: 100557, Ref: DCPN8501A) $53.00

Water Pump - with Press-On Pulley - This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pulley and is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S or NCA8600B 6 Blade Fan Uses 4 1/4 inch mounting bolts on a 3 1/4 inch circle. (Item #: 100556, Ref: S.60627) $44.00

Decals and Emblems

Decal Set - Decal Set for Ford Model 850 (Item #: 183094, Ref: R4129) $44.10

Decal Set, Complete - This complete decal set is for the Ford 800 Series. For model 800. (Item #: 101995, Ref: R4667) $50.00

Ford Script Painting Mask - This Ford script painting mask set includes 2 smaller 7-1/4 inch x 1-3/4 inch and 2 large 9 inch x 3 inch Ford script painting masks for tractor models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Item #: 178198, Ref: S.67163) $21.20

Hood Emblem - This hood emblem is for the 800 Series (bright metal with red background) (Item #: 107982, Ref: NDA16600A) $93.00

Drive Train

2nd Mainshaft and Countershaft Gears - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number B9NN7114A, B9NN7A381B, 4 Speed Only, 2 Piece Set, (Item #: 110911) $191.62

Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Item #: 109579, Ref: 9N4222) $11.20

Axle Rear Collar - This rear axle collar is for tractor models 600, 800, 601, 801, 2000, 4000. (Item #: 128478, Ref: NCA4132A) $15.40

Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref: 8N4233A) $6.00

Bearing Cone - This differential Bearing cone is for tractor models 4120, 800, 801. (Item #: 112127, Ref: NDA4221A) $35.10

Bearing Cone, Rear Axle - This rear axle outer bearing cone is for tractor models 2120, 4120, 600, 800. (Item #: 176639, Ref: NCA44224A) $86.00

Bearing Cone, Rear Pinion - This is a rear pinion tapered bearing cone. (Item #: 182969, Ref: NCA4630A) $107.00

Bearing Cone, Rear Pinion - This is a rear pinion tapered bearing cone. (Item #: NDA4630A) $63.74

Bearing Cup - This differential bearing cup is for tractor models 800, 801, 4000, 2000. (Item #: 112126, Ref: NDA4222A) $18.40

Bearing Cup - This rear pinion tapered bearing cup is for tractor models 2120, 4120, 600, 601, 800, 801. (Item #: TBAA4628A) $37.52

Bearing, Transmission, Output Shaft - This transmission output shaft bearing is for tractor models 2000 and 4000 1965 and prior, 600, 800, 900. All the above with 5 Speed Transmissions. (Item #: 172983, Ref: NDA77060A) $30.00

Center Housing to Axle Housing Gasket - Used on 800, 4120, 801 with heavy duty front end and heavy duty industrial. 13 Mounting Holes, 0.010 Inches Thick, 17-7/16 Inches O.D., 15-3/8 Inches I.D.. Replaces OEM number NDA4036A (Item #: 112051, Ref: NDA4036A) $8.80

Center Housing to Transmission Case Gasket - This Center Housing to Transmission Case Gasket early 4 speed transmission up to tractor serial number 14256 (1954 to early 1955) If you have a 4 Speed transmission above serial number 14256 use part number 310590. (Item #: 179804, Ref: NCA44025A) $5.50

Center Housing To Transmission Case Gasket - This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Item #: 178192, Ref: 310590) $6.00

Countershaft - This countershaft is for tractor models 600, 700, 800, 2000, 4000 (1955-1964), and for 2000, 3000 4-Speed Transmission with PTO (1965-1970). Also replaces NDA7111C. (0622R) (Item #: 126176, Ref: C5NN7N109A) $202.80

Countershaft Bearing Cone - This front transmission countershaft bearing cone is for 4 and 5 Speed Transmissions. For tractor models: 2000 and 4000 before 1964, and 600, 800, 900. (Item #: 109682, Ref: NDA77123A) $15.10

Countershaft Bearing Cup - This transmission countershaft bearing cup is for 4 and 5 speed transmissions. For tractor models: 2000 and 4000 prior to 1964 and for 600, 800, 900. (Item #: 111704, Ref: NDA77124A) $10.10

Differential Front Pinion Bearing Cup - This differential front pinion bearing cup is for tractor models 2120, 3500, 4120, 600, 601, 800, 801. (Item #: NCA4616A) $14.99

Differential Gasket Kit - This differential gasket and o-ring kit is for tractor models 800. (Item #: 185714, Ref: DGK800) $23.50

Differential Pinion Pilot Bearing - This differential pinion pilot bearing is for tractor models 2N (1939 to 1952), 4120 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 800 with 4 speed transmission serial number <54166 - 1958, 5 speed transmission serial number <106115 - 1960, 801 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 8N (1939 to 1952), 9N (1939 to 1952). (Item #: 172931, Ref: BB4625B) $97.00

Differential Pinion Seal - This differential pinion seal is for tractor models (2120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (4120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106115 and up), (600 with 4 speed transmission serial number 54165 and below, 5 speed serial number 196155 and below), (601 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (800 with 4 speed transmission serial number 54166 and below, 5 speed transmission serial number 106115 and below), (801 with 4 speed transmission serial number 54166 and up 5 speed transmission serial number 106115 and up). (Item #: 172933, Ref: 312356) $7.90

Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref: 8N7100) $301.00

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref: 8N7102) $257.00

Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref: B9NN7A381B) $160.00

Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set) $193.00

Gear Shift Boot - This gear shift boot has a bottom hole that is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Item #: 108079, Ref: C5NN7277C) $3.30

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Item #: 155070, Ref: 9N7227B) $11.00

Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B) $94.32

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Item #: 169927, Ref: 9N7221B) $5.70

Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Item #: 179301, Ref: 2N7017A) $255.00

Input Shaft - This is an input shaft used on Sherman Step-Up/Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Item #: 178936, Ref: C3NN7015D) $229.00

Input Shaft - This input shaft is for the 4 Speed transmission. It has 15 Spline, and is 17 inches in overall length. It is for tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Item #: 179311, Ref: 311203) $175.54

Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Item #: 109957, Ref: 8N7052A) $8.00

PTO Countershaft - This PTO Countershaft is used in 5 Speed Transmissions 1955-1964. (Item #: 178942, Ref: NDA701B) $176.00

PTO Shaft HD - For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (all 1964 - earlier), Replaces Ford OEM number 312428, Heavy Duty, 32.620" Long, 1-3/8", 6 Spline, (Item #: 153389) $139.00

Seal, Rear Axle Shaft - This rear axle shaft outer oil seal is for plain axle shaft with sweat collar on tractor models: 600, 700, 800, 900, 2120, 4120. 2.500 inch inside diameter, 3.500 inch outside diameter. Replaces A157317, A24166, A7792, D63674, T11961, 81803465, 83906991, 86531244, D5NN4115B, DKN6362A, E1ADKN6362A, NCA4251B, 300845C91 (Item #: 176468, Ref: D5NN4115B) $11.80

Sherman Transmission External Lever - Step Up/Step Down lever. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 with Sherman trans. (Item #: 182895, Ref: 10A909) $117.00

Sherman Transmission External Lever - Step Up/Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Item #: 182895, Ref: 9N7210) $117.00

Shift Cover Plate Gasket - For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Item #: 109958, Ref: 8N7223) $3.60

Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Item #: 110012, Ref: BB7213A) $4.20

No
Picture
Shift Lever, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 3400, 3500, 4000, 4400, 4500, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number C5NN7202B, For a new version of this item use Item #: 110007, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459149) $48.01

Side Cover Gasket - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Item #: 112236, Ref: 9N4131) $1.00

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref: 9N7120) $97.00

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 110536, Ref: 9N7066) $12.00

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref: 8N7010) $18.40

Transmission Rebuild Kit - This Transmission Rebuild Kit is for 600, 700, 800, 900 Series, 2000, 4000 using 4-speed transmissions (1955-1964). This Transmission Bearing and Seal Kit contains seals, bearings and gaskets required for transmission rebuild. (Item #: 178958, Ref: TSBK5564) $354.00

Electrical System

12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Item #: 103142, Ref: 5564-10300ALT) $147.00

Alternator - This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000, 600, 700, 800, 900. Also used with many other models for 12 volt conversion. Replaces 5564-10305SE. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Adjustable Arm - Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Item #: 172574, Ref: NAA10303) $20.30

Alternator Adjuster Bracket - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 6mm Thick, (1) 10.7mm Unthreaded Hole, (1) 8.5mm x 92mm Slot, 230mm OAL, (Item #: 164215) $14.50

No
Picture
Alternator Conversion Wiring Harness - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Number of Wires: 7, Additional Handling and Oversize Fees Apply To This Item, (Item #: 164235) $24.98

No
Picture
Alternator - Delco Style (12396) - For Ford tractor models 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 961, 971, 981, 2000 (4-cylinder), 4000 (4-cylinder), Replaces manufacturer number ADR0188, 400-12396, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 63 Self Exciting, Clock Position: 3, 1-Wire System, 13mm Wide Pulley, (Item #: 164229) $122.00

Alternator Mounting Bracket, NAA10302 - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 9.5mm Thick, (2) 13mm Unthreaded Holes, (2) 10mm Unthreaded Holes, (Item #: 164214) $20.10

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Item #: 172594, Ref: AFD5035) $21.50

Battery Cable - For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Item #: 115792, Ref: FAE14301B) $14.00

Battery Cable - This Battery Cable is 14 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Item #: 172920, Ref: D1NN14301G) $20.70

Battery Cable - For (600, 700, 800, 900), (2000, 4000 before 1964). Starter to Battery Cable. 12 Volt, 17 inches Long. (Item #: 178605, Ref: 311228) $16.50

Battery Cable - For NAA, Jubilee, 600, 700, 800, 900. All 1953 and up. Cable, 10 inches long. (Item #: 115745, Ref: D1NN14300G) $10.30

Battery Hold Down - Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126636, Ref: NCA10728WN) $5.80

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5/8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Item #: 182920, Ref: 1A13377A) $2.70

Cable, Starter to Switch - Switch to starter cable, 16 inches long. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Item #: 115783, Ref: 9N14431B) $10.00

Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Item #: 105282, Ref: D8JL12029A) $13.50

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Item #: 105281, Ref: D4PE12029AA) $14.00

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref: 8BA12029) $26.30

Coil Wire Assembly - This Coil to Distributor Wire is exactly like the original, with molded ends. Used on Ford 4 Cylinder tractors from 1955-1965. Replaces original part number FDN14302A. (Item #: 182945, Ref: FDN14302A) $11.10

Complete Tune-up Kit - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas), Replaces Ford OEM number 309787, Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set, (Item #: 116748) $57.00

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Item #: 111198, Ref: FET12300A) $4.90

Distributor - With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Comes with Points and Cap. Replaces 311185. Can use Pertronix Electronic Ignition number 1244A if desired. (Item #: 105328, Ref: FDN12127A) $105.00

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Item #: 111462, Ref: 7RA12132A) $5.50

Distributor Bushing - For Ford tractor models NAA, 8N (s/n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 7RA12233, For 4 cylinder models, (Item #: 111466) $3.30

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Item #: 178573, Ref: FDS3253) $39.00

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Item #: 100012, Ref: NCA12106A) $9.00

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref: 7RA12144) $4.60

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref: B12145) $1.30

No
Picture
Distributor Driven Gear - For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Item #: FAD12390A) $44.89

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Item #: 105527, Ref: FAA12239A) $5.00

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Item #: 111315, Ref: D8NN12171AA) $3.70

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref: 350032-KIT) $7.00

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref: 8N12209) $5.80

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref: 8N12213) $3.60

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 111317, Ref: C0NN12200A) $3.10

Distributor Screw - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 350032S, For 4 cylinder models, (Item #: 111467) $3.98

Distributor Seal - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number D8NN12A118AA, FAA12476A, For 4 cylinder models, (Item #: 111463) $6.10

No
Picture
Distributor Washer - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number FAA12179A, (Item #: 113483) $2.98

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105079, Ref: 1244A) $140.00

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Item #: 182576, Ref: 1244AP12) $152.00

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Item #: 182507, Ref: 1244AN6) $169.00

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 105080, Ref: 1244AP6) $165.00

Generator - New LUCAS type Generator 12 volt, 22 amp, 1965 to 1975, less pulley. 2000, 3000, 4000, 5000 Gas and Diesel. (620, 622 1967-1974). (7000 1971-1975 with 4-256). 1968 All 8000, 9000 series (up to 12/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley. Pulley is available (see part number C5NF10196B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A, C4NN10002B. The Generator can also be used as a 12 volt generator on 1955-1965 4 cylinder tractors. NOTE, this is not the same style generator used on 1955-1964 tractors. It can be used to replace a 6 volt generator on 1955-1964 tractors and convert them to 12 volt positive ground system. Includes tach drive. (Item #: 140527, Ref: C7NN10000C) $110.00

Generator Brush - For 6 volt generators on models: 600 series, 601 series, 700 series, 701 series, 800 series, 801 series, 900 series, 901 series, NAA, 2000 4 cylinder, 4000 4 cylinder. Replaces GFD7502, 142-14002, F-14, 027-504, 34450-501, C0AZ-10069-B, B4AZ-10069-A, FBN10069A, B4A-10043-A, C0AZ-10043-A, C0AF-10069-A, FAA10069A, B6A-10043-B, 01A-10069, 2900345, 0A-10069, 3B-7504 (Item #: 185288) $2.20

Generator Brush, 6 Volt, 2 Pack - For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901, For 6 Volt Generators For Listed Models, For Generator Brush, 6 Volt, 4 Pack use Item #: 185288, (Item #: 185289) $6.20

Generator Brush, 6 Volt, 4 Pack - For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901, For 6 Volt Generators For Listed Models, For Generator Brush, 6 Volt, 2 Pack use Item #: 185289, (Item #: 182467) $29.70

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Item #: 182496, Ref: GRK401) $41.60

Ignition Kit With Rotor - 4 Cylinder - Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Item #: 100011, Ref: ATK7FAR) $9.50

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Item #: 105687, Ref: 8N3679C) $7.50

Main Wiring Harness - This Main Wiring Harness includes headlight wiring. Does not include taillight wiring. This kit is designed for tractors that are not equipped with a fuel gauge. If you have a fuel gauge, please plan on reusing your gauge and sending unit wires. This harness is for gas with 6 volt generator systems and without fuel gauge (1953 - 1957). Replaces FDN14401B (Item #: 184664, Ref: FDN14401BOE) $179.00

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Item #: 105710, Ref: 8NE10306) $3.70

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Item #: 130072, Ref: AL437) $3.10

Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. USA. Plug Wire Lengths: 6 inches, 8 inches, 11-1/4 inches, 17 inches. Coil Wire Length: 11-1/4 inches. (Item #: 155171, Ref: CPN12259CUSTOM) $16.60

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Item #: 126654, Ref: 8N11113) $5.00

Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 110819, Ref: C1AF11350A) $29.30

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $28.40

Starter - Ford Style DD without Drive (3115) - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000, Compatible with Ford Construction and industrial models 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040, Replaces Ford OEM number B6A11002A, C3NF11002E, FAR11001A, FAR11002A, C3NF11002CR, Replaces manufacturer number 150-029, 3115, 44-4230, 44-9602, 44-9609, 44-9619, SA-519, SA-519A, SA-622, 91-02-5788, Starter drive gear not included, Ford Style Direct Drive without Drive Gear, Voltage: 12, Rotation: Clockwise, Shaft Length: 5-3/4", For Solenoid use Item #: 112209, (Item #: 112210) $123.00

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref: A9AZ11102B) $8.80

Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Item #: 183911, Ref: SRK403) $33.90

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. Insulated Base, does not ground through mounting bracket. Will work in tractors converted from 6 to 12 volts, using a 4 post solenoid. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Item #: 105690, Ref: 311007) $18.30

Starter Solenoid Assembly - This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, 3 post. Replaces: NCA11450A, DR1494, U925, U928, SW1, SW219 (Item #: 105677, Ref: NCA11450A) $14.30

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Item #: 105685, Ref: 8N11500WG) $15.10

Starter with Drive - This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Item #: 112209, Ref: C3NF11002D) $115.00

No
Picture
Starter with Drive - 12 Volt - 9 teeth, clockwise rotation. For 4000 4 CYL, 4030 1961-62, 4031 1960-62, 4040 1961-62, 4110TR 1963-64, 4120, 4121, 4130 4 CYL 63-64, 4131, 4140 4 CYL 63-64, 501, 541, 600, 6000, 601, 611, 620, 621, 630, 631, 640, 641, 650 1955-57, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Jubilee, NAA. (Additional refundable $50 core charge). (Item #: 203616, Ref: C3NF11002CR) $331.01

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Item #: 165423, Ref: 8NNN14448A) $9.30

Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune-up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Item #: 183923, Ref: 309787) $23.20

Voltage Regulator, 12 Volt 22A Generator - For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Item #: 105538, Ref: C0NF10505A) $37.00

Voltage Regulator, 6 Volt - This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 105537, Ref: FAG10505A) $33.00

Wiring Harness - For Ford tractor models 1955 to 1957, 6 volt. Engine harness, does not include wire to front or rear lights. (Item #: 105715, Ref: FDN14401B) $30.60

Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Item #: 164238, Ref: NAA10301) $17.50

Engine Bearings

Connecting Rod Bearing - .040 - For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Bearing Size: .040" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106265, (Item #: 106266) $6.50

Connecting Rod Bearing - Standard - Journal - For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Replaces Ford OEM number 312026, 4P9944, Bearing Size: Standard, Sold per journal, (Item #: 106261) $12.50

Main Bearings - .010" Oversize - Set - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Compatible with Ford Engine (s) 134, 172, Replaces Ford OEM number EAF6342F, EAF6331D, Bearing Size: .010" Oversize, Sold in complete sets, For Standard main bearing use Item #: 106272, (Item #: 106269) $39.20

Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Item #: 182484, Ref: MBK134172-010) $69.00

Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106270, Ref: MBK134172-020) $45.80

Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106271, Ref: MBK134172-030) $38.00

Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106272, Ref: MBK134172-040) $141.00

Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106267, Ref: MBK134172-STD) $42.00

Piston Pin Bushing - For tractor models NAA, Jubilee, (2000 prior to 1964), 500, 600, 601, 700, 701, (4000 gas from 1962-1964), (800, 900 1955-57), (801, 901 gas 1958-1962). Note, these no longer come with oil hole. It needs to be drilled. 4 Used Per Engine. Sold Individually. Replaces EAA6207A (Item #: 108670, Ref: EAA6207A) $5.90

Rod Bearing Pair, .001 - Rod Bearing Pair for 1 cylinder. .001 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184413, Ref: 312101-PAIR) $13.70

No
Picture
Rod Bearing Pair, .002 - Rod Bearing Pair for 1 cylinder. .002 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184447, Ref: 312102-PAIR) $13.70

Rod Bearing Pair, .010 - Rod Bearing Pair for 1 cylinder. .010 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106263, Ref: 312103-PAIR) $12.80

No
Picture
Rod Bearing Pair, .020 - Rod Bearing Pair for 1 cylinder. .020 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106264, Ref: 312104-PAIR) $11.20

No
Picture
Rod Bearing Pair, .030 - Rod Bearing Pair for 1 cylinder. .030 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106265, Ref: C0NN6211B-PAIR) $11.30

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184403, Ref: CRK312104-020) $46.00

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184520, Ref: CRK312026-030) $128.00

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For tractor models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Item #: 185597, Ref: CRK312026-040) $60.00

Engine Gaskets

Camshaft Cover Gasket - For Ford tractor models NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number C0NN6A250A, Engines: 134, 172 gas / diesel, (Item #: 150041) $7.90

Crankshaft Oil Seal Packing, Pair - This Crankshaft Oil Seal Packing is the original rope style rear crank shaft seal. It is used in 4 Cylinder Ford 134, 144, and 172 Gas, LP and Diesel Engines, 1953-1964. (Item #: 133438, Ref: EBU6701A) $7.20

Crankshaft Seal, Front - This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Item #: 106273, Ref: EAA6700B) $6.60

Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Item #: 182525, Ref: C0NN6701AKIT) $37.00

Crankshaft Seal, Rear Pair - Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Item #: 106274, Ref: C0NN6701A) $8.10

Front Crankshaft Wear Sleeve - This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Item #: 184669, Ref: RP301112) $68.00

Full Gasket Set - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 1955-1957) Replaces Ford OEM number CPN6008B, , Compatible with New Holland Hay Cutting (s) 907, 909, Includes crank seals, All with 1/2" bolts, Contains all gaskets necessary for a complete engine overhaul, (Item #: 106276) $92.00

$Ford 800 Head Gasket 134\172 Gas$
Head Gasket 134/172 Gas - Head Gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Item #: 155277, Ref: EAF6051D) $28.10

No
Picture
Lower Gasket Set - Used on 134 CID and 172 CID gas or diesel engines. For tractor models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106345, Ref: CS3477) $71.00

Main Bearing Cap Packing Material, V-Style - For 134 and 173 CID Engines, 1953 to 1964. Sold individually. (Item #: 172567, Ref: B3NN6336A) $3.10

Oil Filter Inlet Tube Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number B9NN6A628A, Oil filter inlet tube cover gasket, (Item #: 160106) $1.50

Oil Inlet Tube Seal - This part replaces Ford/ New Holland numbers 500391 and EAA6594A. It is used on Ford 4 cylinder tractors, 1953-1964. Models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 (Item #: 155434) $0.60

Oil Pan Gasket - Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106281, Ref: EAF6710B) $7.50

Oil Pump Inlet Tube Flange Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6626C, Inlet tube flange cover gasket, (Item #: 160105) $1.90

Oil Pump to Block Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6659A, Oil pump to block gasket, (Item #: 160104) $1.40

Overhaul Gasket Set, 172 Gas - For 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit for engine heads that use 7/16 inch head bolts. Includes crankshaft seals. (Item #: 106276, Ref: FPN6008B) $92.00

Overhaul Gasket Set, 172 Gas - For tractor models: 800, 801, 900, 901; 172 CID Gas 1958 and up, 4000 to 1964. Overhaul Gasket Kit for engine heads that use 1/2 inch head bolts. Includes with crankshaft seals.FPN6008B1 (Item #: 106276, Ref: CPN6008H1) $92.00

$Ford 800 Overhaul Gasket Set Less Head Gasket 134\172 Gas$
Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Item #: 182454, Ref: CPN-FPN) $65.00

Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Item #: 165426, Ref: EAF6521D) $6.70

Pushrod Side Cover Grommet - Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Item #: 165425, Ref: C0NN6589A) $2.50

Seal - Hydraulic Pump Shaft Oil Seal. Inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For 2000, 4000, 600, 700, 800, 900, NAA. C5NN851A (Item #: 117609, Ref: NCA851A) $6.60

Timing Gear Front Cover Gasket - For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Item #: 172791, Ref: EAF6020B) $2.70

Upper Gasket Set, 172 Gas - For tractor models 800, 801, 900, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket Kit with 1/2 inch head bolts. (Item #: 106302, Ref: VGFPN1) $74.00

Upper Gasket Set, 172 Gas - Upper Engine Gasket Kit. Kit includes EAF6051D, EAF6584C, C0NN9448C. For tractor models 800, 900, 801, 901, 4000 1963 to 1964 with 7/16 inch head bolts. (Item #: 106302, Ref: VGFPN) $74.00

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Item #: 178199, Ref: EAF6570A) $5.00

Valve Cover Vent Breather Gasket - This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Item #: 172956, Ref: EAF6863C) $1.50

Valve rocker arm cover gasket. - Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Item #: 128766, Ref: EAF6584C) $12.60

Engine Rebuild Kits

Basic In Frame Overhaul Kit, 172 Gas, with Metal Head Gasket - 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains head gasket with upper gasket set, sleeves, pistons, rings, pins and retainers, oil pan gasket. Bearings are available, must order separately. For tractor models 4000 (1963 to 1964), 800, 801, 900, 901. (Item #: 189416, Ref: BIFF115AM) $452.05

Basic In Frame Overhaul Kit, 172 Gas, with Non Metal Head Gasket - 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, NON-METAL head gasket with upper gasket kit, oil pan gasket. Bearings are available, must be ordered separately. For tractor models 4000 (1963-1964), 800, 801, 900, 901. (Item #: 184710, Ref: BIFF115A) $455.10

Basic Overhaul Kit - 172 CID 4 cylinder gas 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket set. less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 183988, Ref: BEKF115A-LCB) $429.00

Basic Overhaul Kit, 172 Gas, Overbore - 172 CID 4 cylinder gas 4.0 inch overbore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, Less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 130780, Ref: BEKF109-LCB) $406.00

Engine Overhaul Kit with New Crankshaft - Comprehensive Kit For tractor models (1955 to 1964) 800, 900, 801, 901, 4000 up to 1964 with the 172 cu. inch Gas Engine 3.9" bore. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top and Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front and Rear Seals. Kit INCLUDES NEW CRANKSHAFT. (Item #: 183678, Ref: EKMC125) $1629.01

No
Picture
Engine Rebuild Kit - Less Bearings - 1955-1957, 172 - For Ford tractor models 800, 820, 840, 850, 860, 900, 950, 960 (all 1955-1957), Compatible with Ford Engine (s) 172 (gas), Bore: 4.000", Stroke: 3.600", .912" piston pin diameter, Early press fit liners can be bored up to .040" oversize, Models 1955-1957, Sleeved block, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130955) $347.00

Engine Rebuild Kit - Less Bearings - 1962-1972, 172 - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130783) $487.00

Engine Rebuild Kit with Valve Train - Less Bearings - 1962-1972, 172 - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130810) $650.00

Overhaul Kit, 172 Diesel - Complete Overhaul Kit For 800, 900, 4000 With 172 inch Diesel Engine with 5-ring pistons. Contains sleeve and piston kit, complete gasket set, connecting rod bushings and bearings, center, front and rear main bearings, intake and exhaust valves (plus guides, locks and springs). Available with Std., .001 inch, .002 inch, .010 inch, .020 inch or .030 inch bearings. (Item #: 184770, Ref: 172DK) $1194.04

Overhaul Kit, 172 Gas - Overhaul kit for 800, 801, 900, 901, 4000 (1955-1964). With 4-cylinder 172 gas engine with 3-ring pistons. Contains sleeve and piston kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set). Basic gasket set. Intake and exhaust valves (plus guides, locks and springs). Bearings sold separately. (Item #: 130811, Ref: EOK115-LCB) $573.00

Piston - .020" Oversize - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Engine (s) 172 (gas), .020" Oversize, Standard Bore: 3.901", Piston only, (Item #: 108668) $71.00

No
Picture
Rebore Kit, 172 Gas - 3.90 inch .020 oversize. For tractor models 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3337) $212.31

No
Picture
Rebore Kit, 172 Gas, STD - 3.900 inch bore. For 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3336) $253.71

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Item #: 178669, Ref: VSKF134G) $115.00

Valve Train Kit, 134 CID Gas - For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Item #: 108790, Ref: VOKF134G) $114.00

Valve Train Kit, 172 CID Gas - For 172 CID 4 cylinder gas engines. Kit comes with 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve springs, 8 valve keys, 8 valve locks. Models: 2000 <1964, 4000 1962-1964, (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840 all 1955-1957), (801, 811, 821, 841, 851, 861, 871, 881 all 1958-1962), (900, 950, 960 all 1955-1957), (901, 941, 951, 961, 971, 981 all 1958-1962). (Item #: 108790, Ref: VOKF134G) $114.00

Engine Parts

No
Picture
2nd Speed Mainshaft Gear, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2120, 2130, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 7530, Compatible with Ford Construction and industrial models 2030, 3550, 4040, Replaces Ford OEM number B9NN7A381B, Replaces Ford Casting nos 8N7101B, 8N7114B, Teeth: 56, Splines: 17, 3 and 4 Cylinder Tractors with 4 Speed Transmission, For a new version of this item use Item #: 108536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435402) $72.01

No
Picture
Bare Block, Remanufactured, C0NN6015C, D3JL6015J - For Ford tractor model 800, Replaces Ford Casting number C0NN6015C, D3JL6015J, Casting number (s): C0NN6015C, D3JL6015J, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204910) $930.01

No
Picture
Bare Block, Remanufactured, EAF6015F - For Ford tractor models 800, 900, 4000, Replaces Ford Casting number EAF6015F, EAF6015H, EAF6015J, Casting number (s): EAF6015F, EAF6015H, EAF6015J, Engine: 172, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204927) $1050.01

Camshaft - Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Item #: 160917, Ref: C0NN6251A) $241.00

No
Picture
Camshaft Gear, Used - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number EAF6256M, Crankshaft Teeth: 21, Camshaft Teeth: 42, Camshaft I.D. 1.0", For a new version of this item use Item #: 121561, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435994) $34.01

Camshaft Hydraulic Pump Drive Gear - For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Item #: 123501, Ref: EAF907B) $69.00

Camshaft Kit, Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Item #: 184418, Ref: 734145) $392.00

Camshaft Timing Gear, STD - Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Item #: 121561, Ref: EAF6256M) $57.00

Camshaft, Used - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2111, 2120, 2130, 2131, 4000, 4000SU, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Compatible with Ford Engine(s) 134 (gas), 172 (gas), Replaces Ford OEM number C0NN6251A, EAF6250F, 313077, Late style camshaft using snap ring groove, Long nose, 1" wide gear, For a new version of this item use Item #: 160917, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436251) $122.01

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref: 7HA-6212) $1.90

Connecting Rod Nut - For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B, For OEM Quality use Item #: 183734, (Item #: 182466) $1.10

Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Item #: 185237, Ref: D1NL6303D) $700.00

Crankshaft Gear - This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Item #: 121563, Ref: EAF6306B) $60.00

Crankshaft Pulley - Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Item #: 169121, Ref: C0NN6351A) $92.92

Crankshaft, Remanufactured, B9NN6303B - For Ford tractor models 800, 900, Compatible with Ford Engine (s) 172 (diesel), Replaces Casting number B9NN6303B, B9NN6302B, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200171) $514.01

No
Picture
Crankshaft, Remanufactured, C0NN6303C, 310372 - For Ford tractor models NAA, 600, 700, 800, 900, 2000, 4000, Compatible with Ford Engine (s) 134 (gas), 172 (gas), Replaces Casting number C0NN6303C, 310372, D1NL6303A, EAF6303, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200170) $550.01

Cylinder Head - For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For tractor models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Includes Guides and Seats. Does not include valves, or springs. Replaces D3JL6049B, 310098, 310100. Replaces Casting nos EAE6085E, 310098, 310100, D1NL6049D, D1NL6090D, EAE6090F, EAF6090F, EAF6090H (Item #: 121813, Ref: D3JL6049B) $900.00

No
Picture
Cylinder Head, Remanufactured, B9NN6090A - For Ford tractor models 800, 900, Replaces Ford Casting number B9NN6090A, 310665, C0NN6090E, D3JL6090G, E1E6050, Engine: 172D, Casting No. B9NN6090A, D3JL6090G, 310665, E1E6050, C0NN6090E, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, Cleaned and tested for cracks, (Item #: 203914) $1050.01

No
Picture
Cylinder Head, Remanufactured, D1NL6049D - For Ford tractor models 800, 900, 4000 (Gas), Replaces Ford Casting number D1NL6049D, 310100, D1NL6090D, EAF6090H, Engines 172, Cylinders: 4, 1/2" head bolts, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, For a New version of this sku use Item #: 121813, (Item #: 205484) $800.01

No
Picture
Cylinder Head, Used - For Ford tractor models 800, 900, Replaces Ford Casting number 310665, B9NN6090A, C0NN6090E, D3JL6090G, E1E6050, Engine: 172D, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 203914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403914) $321.01

No
Picture
Cylinder Head, Used - For Ford tractor models 800, 900, 4000 (Gas EAF), Replaces Ford Casting number 310100, EAF6090F, EAF6090H, Engine(s): 172, Cylinders: 4, 7/16" head bolts, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 310263, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400131) $475.01

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref: 350645S) $18.80

Governor Assembly - This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Item #: 115381, Ref: EAF12470A) $111.00

Governor Ball - These are 3/4 Inch Governor Balls used in production 1952-1958. Later style governors did not use these, and many older tractors have upgraded governors without ball bearings. Replaces part numbers 86624946, 8NNN18229 (Item #: 178188, Ref: 8NNN18229) $1.20

Governor Compensating Spring - Mounts between Bellcrank and under battery tray, 6.535 inch overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Item #: 178181, Ref: NCA9827A) $8.50

Governor Compensator Spring Assembly - 3 Pieces. Replaces NCA99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas. For 501 thru 4140 4 cylinder gas and LP 1958-1964 with engine serial number 26402 and up. (Item #: 116123, Ref: NCA99810A) $26.00

Governor Shaft Oil Seal - Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Item #: 178055, Ref: EAF18183B) $8.90

Lifter - Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Item #: 160900, Ref: F3JL6500AA) $11.40

Main Shaft Gear, Used - For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140, Replaces Ford OEM nos 8N7110, 4th Gear, Teeth: 39, Splines: 17, Inside Diameter: 1.783", Outside Diameter: 5.119", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436813) $95.01

$Ford 800 Push Rod, 5\16 Diameter$
Push Rod, 5/16 Diameter - If replacing 1/4 inch outside diameter push rod (early 134 engines), you must also use part number 131473 rocker adjusting screw, and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5/16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Item #: 182481, Ref: 500356) $11.20

Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref: 9N6384) $26.00

Rocker Arm Screw - Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473) $47.30

Tappet - For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Item #: 160900, Ref: EAA6500D) $11.40

Timing Gear Set - Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Item #: 149997, Ref: EAF6256MSTD) $159.00

Transmission Gear - 3rd, Used - For Ford tractor models NAA, 8N, 501, 541, 600, 620, 621, 630, 631, 640, 641, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Replaces Ford OEM number 8N7102, Teeth: 28 and 52, For a new version of this item use Item #: 172982, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459492) $134.01

Valve, Exhaust - Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Exhaust - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172539, Ref: EAF6505D) $11.60

Valve, Intake - Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172846, Ref: EBU6507A) $8.40

$Ford 800 Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Item #: 107088, Ref: 7HA6518) $0.60

Valve Spring - Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Item #: 173016, Ref: EAA6513A) $2.50

Valve Stem Cap, Exhaust - This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Item #: 168344, Ref: 8EQ6550A) $4.80

Engine Pistons and Sleeves

Cylinder Kit - 4.000 - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000 (series), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (4 cylinder gas, 1955-1961, 3.901" standard bore), Compatible with New Holland Hay Cutting (s) 907, 909, 4.000" Overbore Cylinder Kit, Includes: Piston and Rings, Liner, Pin and Retainers, For 3.901" standard bore cylinder kit use Item #: 161138, (Item #: 161137) $81.00

No
Picture
Piston, .020 Overbore, 172 CID Gas Engine - Overbore .020 3-Ring Piston (rings NOT included) with Pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas engine (1953-1964) on: 800, 801, 900, 901, 4000. Price is for one piston. (Item #: 184929, Ref: EAF6108G) $31.30

No
Picture
Piston, .030 Overbore, 172 CID Gas Engine - Overbore .030 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185436, Ref: EAF6108H) $33.80

No
Picture
Piston, .040 Overbore, 172 CID Gas Engine - Overbore .040 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185551, Ref: EAF6108J) $31.30

No
Picture
Piston and Sleeve Kit 172 Gas - Kit, Press-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.1 inch outside diameter. (Item #: 185075, Ref: FPN6055A) $615.00

No
Picture
Piston and Sleeve Kit 172 Gas - Kit, Drop-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.098 inch outside diameter. (Item #: 161138, Ref: FPN6055B) $217.00

Piston Sleeve, 172 Gas - Used on 172 Gas engines with 4.0 inch bore (3.90 is standard). Used 1954-1964 when 4.0 overbore pistons have been installed. (Item #: 184425, Ref: EAF6055D4) $39.80

Piston Sleeve, 172 Gas or Diesel Engine - Standard Sleeve with 3.9 inch bore, (4.1 inch outside diameter, press fit) for 172 CID gas or diesel engines on: 800, 801, 900, 901, 4000. (Item #: 172912, Ref: EAF6055D) $42.90

No
Picture
Piston, Standard, 172 CID Gas Engine - Standard 3-Ring Piston, 3.9 inch bore, (Rings NOT included) with Pin and Locks. For 172 CID 4-Cylinder Gas Engine on: 800, 801, 900, 901, 4000 (1953 to 1964). (Item #: 184427, Ref: EAF6108F) $51.00

Sleeve and Piston Kit, 172 Gas, STD - Sleeve and Piston Kit for models 800, 801, 900, 901, 4000, Jubilee. All with 172 CID Gas, 4 Cylinder (1955-1964). Standard bore. For 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains: pistons, sleeves, piston pins, retainers and chrome top and chrome steel rail oil control rings. (Item #: 190153, Ref: PK15G1) $715.00

No
Picture
Sleeve, STD, 172 CID Gas - Standard sleeve. For tractor models 4000, 800, 801, 900, 901. All with 3.9 inch bore, 4.098 inch outside diameter drop-in. Prefinished. (Item #: 172912, Ref: B3NN6055B) $42.90

Engine Rings

No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as a complete 4 cylinder set, For single cylinder set use Item #: 150187, (Item #: 150186) $61.98

No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder Set - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - .020" Oversize - Single Cylinder use Item #: 120775, (Item #: 174347) $101.00

Piston Ring Set - .020" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555849, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120778, (Item #: 108669) $34.90

Piston Ring Set - .020" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120776, (Item #: 120775) $29.70

Piston Ring Set - .030" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555848, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .030" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 150189, (Item #: 120777) $47.50

No
Picture
Piston Ring Set - .040" Oversize - 4 Cylinder Set - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, For .040" Oversize Single Cylinder Piston Ring Set use Item #: 120776, (Item #: 174341) $201.00

Piston Ring Set - .040" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120775, (Item #: 120776) $52.00

Piston Ring Set - .040" Oversize - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number FPN6149J, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .040" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120777, (Item #: 120778) $34.90

Piston Ring Set - .060" Oversize - 4 Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .060" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, For standard use Item #: 150190, (Item #: 120779) $111.00

Piston Ring Set - 4.000" Overbore - 4 Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129003) $180.00

Piston Ring Set - 4.000" Overbore - Single Cylinder - For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 3.901" standard bore) Replaces Ford OEM number AF6149A, , Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (1) @ .078" and (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .078", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.000" Overbore - 4 Cylinder use Item #: 174353, (Item #: 120781) $15.50

No
Picture
Piston Ring Set, Gas - Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with 2 compression at 3/32 and 1 oil. (Item #: 174337, Ref: 2C7673) $109.00

No
Picture
Piston Ring Set, Gas, .020 Over - Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with .020 inch overbore with 2 compression at 3/32 inch and 1 oil at 3/16. (Item #: 174350, Ref: 2C7673.020) $113.00

No
Picture
Piston Ring Set, Gas, .030, Chrome - Overbore .030 (Standard bore is 3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch (top is Chrome), and steel rail oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 150189, Ref: EAF6149B) $96.44

No
Picture
Piston Ring Set, Gas, .040 Over - For a single cylinder. 4 Cylinder Gas 3.9 inch bore with .040 overbore with 2 compression at 3/32 and 1 oil ring at 3/16. (Item #: 120778, Ref: 2C7673.040) $34.90

No
Picture
Piston Ring Set, Gas, 4 Inch Overbore - For tractor models 800, 801, 900, 901, 4000. All 1953-1964 with 172 gas. 3.9 inch bore engines. This ring set is for 4 inch overbore, with 2 compression rings at 5/64 inch, 3/32 inch and oil at 3/16 inch. (Item #: 174353, Ref: PRS109) $76.00

Piston Ring Set - Standard - Single Cylinder - For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539364, , Compatible with New Holland Hay Cutting (s) 907, 909, Bore: 3.901", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - Standard - 4 Cylinder use Item #: 120776, (Item #: 120774) $28.10

Piston Rings, Gas - For one Piston. Standard bore (3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch, and Steel rail oil ring at 3/16 inch. Order 4 for a complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 108791, Ref: EAF6149A) $31.00

Exhaust System

Elbow to Exhaust Manifold Gasket - For 172 CID gas engines 1958-1964 on Models: 800, 801, 900, 901, 4000. Use with elbow 310075 and muffler 310079. Priced each. (Item #: 121816, Ref: 310074) $2.30

Exhaust Elbow, Vertical - Constructed like the original, this elbow is for above the hood, vertical exhaust. It is used on Ford tractors with 134 gas, and some early Ford tractors with 172 gas. It is for systems using an elbow coming off the manifold that is 1-5/8 OD. (Item #: 183775, Ref: NAA55258A) $104.00

Exhaust Elbow With Gasket - Outlet is 1 5/8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801, NAA. All with 134 or 172 CID engine. Replaces NAA55250B (Item #: 185223, Ref: NAA55250BWG) $34.90

Exhaust Manifold Elbow - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000, Replaces Ford OEM number NAA55250B, 1-5/8" O.D., (Item #: 101518) $25.80

Exhaust Manifold Elbow - Gasket - Fits 134 CID Gas Engines 1953 to 1964 on models: NAA, 600, 601, 700, 701. 172 CID Gas Engines 1955 to 1957 on models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Item #: 121815, Ref: NAA55232A) $2.10

Exhaust Pipe, Curved - Outlet pipe, horizontal, curved section. Outlet 1-1/2 inch outside diameter. For 134 CID gas engines. Tractors: 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771. 172 and 134 CID gas engines. Tractors: 800, 820, 840, 850, 860 (1955 to 1962), 900, 950, 960, 2000 (4 cylinder 1963 to 1964). Does not include row crop tractors. (Item #: 114744, Ref: NCA5255B) $26.30

Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, 2000 (1963-1964), 501, 600, 601, (1958-1962 with 134 gas engine), 700, 701 (1958-1962 with 134 gas engine), 800 (1955-1957 with 172 gas engine). Dimensions: Inlet inside diameter 1-1/2 inch, length 54 inch, outlet outside diameter 1-1/2 inch. (Item #: 115438, Ref: NCA5263B) $31.90

Exhaust Pipe, Horizontal - This is a single piece exhaust pipe used from muffler to tailpipe. It replaces NCA5255B and NCA5263B as a single pipe. 1 1/2 inch inlet inside diameter, 1 1/2 inch outlet outside diameter, 78 inch overall length. For a less expensive shipping option, order the two piece version, 127308. (Item #: 184825, Ref: R1613) $26.98

Exhaust Pipe, Horizontal, 2 Piece - Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. Can also order R1613 as a 1 piece unit. (Item #: 127308, Ref: NAA5255D) $53.00

Extension Pipe - Vertical Two-Piece Exhaust Pipe with Clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5/8 inch inside diameter, outlet 1-3/4 inch outside diameter. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 115465, Ref: M105) $53.00

Extension Pipe, Curved - Outlet Pipe, curved section. Not for row crop or grove. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). (Item #: 115454, Ref: 311051) $35.90

Extension Pipe, Straight - Outlet Pipe Extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). Not for row crop, grove, select-o-speed. (Item #: 115475, Ref: 311050) $35.90

Intake and Exhaust Manifold Gasket, Diesel - For 172 CID diesel engine Models: 800, 801, 900, 901, 4000. All 1958-1964. Pack of 4. (Item #: 185549, Ref: 310658) $8.80

Intake and Exhaust Manifold Gasket Set - For Gas Engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Contains two manifold gaskets, two different size carburetor to manifold gaskets, and elbow gasket. Replaces NAA55232A, 87018642, C0NN9448C (Item #: 101517, Ref: C0NN9448C) $6.50

Manifold, Gas - Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Order the gaskets (C0NN9448C) separately. (Item #: 101516, Ref: TFM9425WG) $100.00

Manifold Nut and Washer Kit - This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Item #: 153429, Ref: 33817-KIT) $9.40

Muffler - For Ford tractor models NAA, 501, 600, 700, 800, 900, 2000, 4000, Replaces OEM number FO12, AFD1210, FO-12, Inlet Inside Diameter: 1 5/8", Outlet Outside Diameter: 1 3/4", (Item #: 100580) $79.00

Muffler and Pipe Assembly, Vertical - For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-1964. For the following 172 CID gas tractors: 800, 900, ALL 1955-1957 and the 4-cylinder 4000 series 1958-1964. This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5/8 inch inside diameter (verify that you have a 1 5/8 inch exhaust elbow), outlet 1-3/4 inch outside diameter. The order of this exhaust system is exhaust elbow (not included) exhaust pipe, then muffler above the hood. (Item #: 100580, Ref: M103) $79.00

Muffler Heat Shield - This is Muffler Heat Shield is exactly like the original. It is used on Ford Tractors with 134, 172 and 192 4-cylinder gas and diesel engines, 1953 - 1964. It is 25-3/4 inch long. Has a red powder coat finish. Replaces original part number NCA5290A (Item #: 153378, Ref: NCA5290A) $55.00

Muffler, Horizontal - For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4 inch, inlet tube 1-5/8 inch ID, shell length 13 inch, shell diameter 3-1/4 inch, outlet tube length 2-1/4 inch, outlet tube outside diameter 1-5/8 inch OD, muffler overall length 17-1/2 inch. (Item #: 100570, Ref: NAA5230E) $25.10

Vertical Exhaust Assembly - For tractor models: Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier). All with gas engines. Two piece assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3/4 Inch OUTLET DIAMETER, 1 5/8 Inch INLET DIAMETER. (Item #: 115465, Ref: FDE170) $53.00

Vertical Exhaust Kit - Constructed like the original equipment, this kit features Cast Steel Vertical Exhaust Support Elbow, Extension Pipe and Clamp. It is used on Ford 4 Cylinder tractors 1953-1964, 134 and 172 gas, when the manifold elbow is 1-5/8 inch OD. Replaces NAA55237A (Item #: 167349, Ref: NAA55237AOE) $117.70

Vertical Exhaust Pipe - This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1-3/8 inch I.D., outlet 1-1/2 inch. It is for gas models NAA, 500, 501, 600, 700, (4 cylinder 2000 and 4000 1953 to 1964), 800, 900. All with the 134 and 172 cubic inch engines. (Item #: 111035, Ref: NAA55237A) $42.00

Vertical Muffler and Pipe Assembly - For tractor models 1964 and earlier 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11/16 inch inlet and 1 3/4 inch outlet. This is one piece welded construction. FO-21 (Item #: 100579, Ref: FD2110) $113.00

Fuel System / Air Intake

Air Cleaner Assembly - For tractor models 700, 740, 750, 800, 820, 840, 900, 950, 960. Restoration Quality Air Cleaner Assembly. Includes cup. Also Replaces 312918. (Item #: 182798, Ref: C7NN9600J) $131.00

Air Cleaner Clamp - Air cleaner oil cup clamp 4 1/2 inches. For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Item #: 111916, Ref: 311508) $15.10

Air Cleaner Clip - For tractor models NAA, Jubilee, 600, 700, 800, 900. Not exactly like original, works the same. (Item #: 167409, Ref: 9N9678) $5.10

Air Cleaner Cup - This new air cleaner oil cup measures 5 inches outside diameter at the lip and is 3-1/8 inches tall. This cup is used for the clip type air cleaner (not the clamp type). Please measure your cup prior to ordering. Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B available separately. On the 800 and 900 series tractors, it is serviceable. It will look different but fit fine. Replaces: 8N9658, 8N9658C, Serviceable for: B9NN9658A. (Item #: 179783, Ref: S.61648) $29.60

Air Cleaner Cup - For tractor models NAA, Jubilee, 600, 700, 800, 900. 4 7/8 inch diameter, 3 5/8 depth. Replaces OEM # B5NN9658A. (Item #: 178104, Ref: S.60583) $27.70

Air Cleaner Cup Gasket - For air cleaners with toggle clamps on side of air cleaner (14-3/4 inches long). Use with Air Cleaner Cup S.61648 and S.60583. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Item #: 111390, Ref: 9N9623B) $7.90

Air Cleaner Funnel Screen - Air Cleaner Funnel Screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964). TIS (Item #: 126374, Ref: NAA9669A) $5.00

Air Cleaner Grille Door with Screen and Thumb Screw - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NAA9661B, NAA9669A, Includes: Air cleaner grille door, screen and thumb screw, (Item #: 126375) $22.00

Air Cleaner Hose - Rubber air cleaner to carburetor hose is not like original metal tube. VERIFY THE INSIDE DIAMETER AT 1.5 Inches, 18 inches in length (20.5 inches following the curves). For tractor models using 134/172 gas engine: 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Item #: 173789, Ref: 311112) $41.00

No
Picture
Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models 2N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. Replaces: 311507. (Item #: 111005, Ref: 311507) $11.98

Air Cleaner Oil Cup - For Ford tractor models 501, 541, 601, 611, 620, 621, 631, 641, 651, 700, 800, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Replaces Ford OEM number 311510, Height: 3.00", ID: 4.46", OD: 4.75", Color: Blue, (Item #: 172462) $33.70

Air Cleaner Tube - Used on Ford Tractors with 172 cubic inch 4 cylinder engines, 1954-1957, this tube has a 1.58 inch outside diameter. It is connected to the air cleaner and to the carburetor with part number 9N9652, sold separately. Replaces EAF9621B, 311112 (Item #: 178971, Ref: EAF9621B) $41.00

Air Funnel - For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960, (2000, 4000 ALL < 1964). (Item #: 151929, Ref: NAA9684A) $27.70

Air Hose to Carburetor - 1.5 Inches - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Item #: 149842, Ref: 9N9652) $3.10

Air Hose to Carburetor - 2 Inch - For tractor models 601, 701, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000 series. All 1958 and up. For tractors using 2 inch metal pipe. (Item #: 159583, Ref: 311107) $6.40

Carburetor - Cast Iron, like original. For tractor models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840. Replaces TSX580, Zenith 13880, and Ford #B4NN9510A. Uses 86531362 3/8 inch fuel line bolt. Center to center on the 2 mounting bolts is 2 1/4 inches. (Item #: 103147, Ref: EAE9510D-OE) $165.00

Carburetor - This Zenith carburetor outperforms the original carbs used on: 800 series, 900 series tractors 1955-1957 with 172 CID gas engine. This Zenith carb replaces Marvel-Schebler TSX706 (supersedes TSX593) and Ford EAF9510G. Center to center on the 2 mounting bolts is 2 3/8 inches. (For 2 1/4 see EAE9510D). Uses 86531362 3/8 inch fuel line bolt. Made in USA, 1 year warranty. (Item #: 100755, Ref: 13877) $480.00

Carburetor - For tractor models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840. Replaces TSX580, Zenith 13880, and Ford EAE9510D and B4NN9510A. (This Carburetor will also replace Marvel-Schebler TSX706 and TSX593 when the manifold will accommodate 2 1/4 inch mounting bolt spacing.) Uses 86531362 3/8 inch fuel line bolt. Center to center on the 2 mounting bolts is 2 5/16 inches. (For 2 3/8 see 13877) (Item #: 155438, Ref: EAE9510D) $200.00

Carburetor - This is a new Original Marvel-Schebler Design carburetor. It Replaces carburetors marked TSX662, TSX769, TSX813 or TSX977. Center to center on the 2 mounting bolts is 2 11/16 inches. Fuel inlet is 7/16 inches. Note, TSX813 and TSX662 use 3/8 inch fuel bolt. If replacing one original TSX813 or TSX662, you will need to replace your sediment bowl and your banjo bolt to 7/16. Used on Ford 172 Gas Engines 1957 - 1964. Replaces Ford / New Holland numbers: 310015, 312955, C0NN9510C, C0NN9510G (Item #: 184573, Ref: TSX813) $377.00

Carburetor Butterfly - Fits Marvel Schebler TSX33, TSX241, TSX241A, TSX241B, TSX241C, TSX420. For tractor models NAA, NAB, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 182734, Ref: 9N9585A) $5.00

Carburetor Elbow and Strainer - For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600 series, 700 series, 800 series. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float - For 800, 801, 900, 901, 4000. Carburetor Float with Marvel Schebler with 172 Engine large bowl measures 2 3/4 inches at widest point. Replaces OEM part number 311608. (Item #: 105095, Ref: R2383) $19.50

Carburetor Float, Small Bowl - Small Bowl Carburetor Float for Marvel Schebler carbs (2 3/8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (year): 134 CID (1953 to 1954) or 172 CID (1955 to 1957) gas engines on tractors: NAA, 501, 601, 700, 701, 800, 801, 900, 901, 2000. (Item #: 108449, Ref: 9N9550A) $9.60

Carburetor Float, Zenith - This Float is used in the following Zenith Replacement Carburetors (not original Marvel Schebler): 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Carburetor Gasket Set - For tractor models 8N, 9N, NAA, Golden Jubilee, Jubilee, 600, 800, 2N, 620, 630, 640, 650, 660, 700, 740, 820, 840, 850, 860, 900, 950, 960, NAB with the following Marvel Schebler carburetors: TSX101, TSX126, TSX133, TSX137, TSX144, TSX151, TSX161, TSX171, TSX179, TSX197, TSX211, TSX241A, TSX241B, TSX241C, TSX246, TSX258, TSX290, TSX297, TSX301, TSX33, TSX341, TSX37, TSX38, TSX407, TSX420, TSX423, TSX44, TSX447, TSX453, TSX481, TSX55, TSX577, TSX580, TSX593, TSX69, TSX748, TSX76, TSX765, TSX771, TSX787, TSX79, TSX80, TSX818, TSX827, TSX83, TSX94, TSX976, TSXU829, TSXU832, TSX198, TSX241, TSX241A, TSX241B, TSX241C, TSX305, TSX319, TSX420, TSX428, TSX500, TSX551, TSX577, TSX580, TSX593, TSX692, TSX706, TSX771, TSX976, TSXU834 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Gasket Set - This gasket set is for all Models 1953-1957, using Marvel Schebler carburetor. Used on the following Marvel carbs: TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 (Item #: 182503, Ref: EAF9502) $5.10

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877 (Item #: 183586, Ref: BK44V) $27.60

Carburetor Kit, Basic - Basic carburetor repair kit. For tractor models from 1955 to 1957, with 172 CID gas engine. Carburetor part number: Marvel-Schebler TSX580 (supersedes TSX593), Ford 312954. Kit contains: throttle shaft, viton float valve, float lever pin, and gaskets for minor carburetor repair. For 2000, 501, 601, 701, 800, 900. (Item #: 184495, Ref: BK47AV) $30.70

Carburetor Kit, Basic - Kit for Marvel TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 carbs used on 2000 4 cyl., 2N, 4000 4 cyl., 600, 601, 605, 611, 612, 621, 630, 631, 640, 641, 644, 650, 651, 655A, 655C, 655D, 655E, 660, 661, 671, 675D, 675E, 681, 685, 700, 702, 724, 725, 730, 735, 740, 741, 743, 744, 745, 745S, 750, 755, 755A, 755B, 765, 766DT, 771, 775, 785, 800, 801, 811, 820, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 8N, 9N, NAA, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Basic - Kit for Marvel TSX662, TSX769, TSX813, TSX977 used on 4000 4 cyl., 800, 801, 811, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Item #: 100734, Ref: MS102) $15.30

Carburetor Kit, Basic - Kit for Zenith 12493, 13879, 13800 and 13877 carb used on NAA, Jubilee, 800 series, 900 series tractors. (Item #: 100740, Ref: Z103) $17.90

Carburetor Kit, Complete - For 800 and 900 1955-1957 with 172 CID gas engine, with a Marvel-Schebler TSX706 or TSX593. Does not include float. (Item #: 112351, Ref: C547AV) $47.40

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler: TSX593, TSX706, OEM Carb #: EAF9510G, EAF9510D . Contains all parts shown. For tractor models 800 and 900. (Item #: 178067, Ref: R7852) $55.00

Carburetor Kit, Comprehensive - This carburetor kit contains all parts shown. It is used on Marvel Schebler TSX662, TSX769, TSX813. Verify carburetor number before ordering. (Item #: 184681, Ref: R7855) $67.00

Carburetor Main Adjustable Needle - Main adjusting needle. For tractor models 501, 600, 700, 800, 900, NAA. (Item #: 182842, Ref: EAE9565A) $12.20

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX580. For the following tractor models: 600, 620, 630, 640, 650, 660, 700, 800, 820, 840. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203255, Ref: 1306-CARB) $225.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX593, TSX706. For the following tractor models: 800, 900. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203257, Ref: 1310-CARB) $225.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX692. For the following tractor models: 601, 701, 800, 900, 2000 EARLY, 4000 Early. Add $100.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. (Item #: 203256, Ref: 1314-CARB) $225.01

Choke Knob - For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. 10-32 thread. (Item #: 178058, Ref: 9N9703) $5.40

Choke Rod Assembly - This is the Carburetor Choke Control Rod Assembly for Ford tractors 1953-1964. Uses 9N9703 or 9828014 knob. Approximately 26-7/16 inches long. Not included. Replaces NAA9705B. (Item #: 182994, Ref: NAA9705) $18.20

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cyclone Air Cleaner Glass Jar (jar only) screw on type. Exactly like original for tractors that used the "Cyclone" air cleaner only. (Item #: 178043, Ref: 230056) $34.20

No
Picture
Cyclone Air Cleaner Glass Jar Seal - Cyclone Air Cleaner Glass Pint Jar Seal (Item #: 184394, Ref: ACP1248) $2.30

Cyclone Cup and Spring Assembly - Only for those tractors (1939 to 1964) that used the CYCLONE Air Cleaner Assembly which MAY include: 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Verify the type of air cleaner you have before ordering. (Item #: 178172, Ref: 230053) $18.10

Friction Disc for Throttle Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Item #: 111446, Ref: C5NN518B) $1.80

Fuel Bowl - Fuel bowl. 1 1/2 inches diameter bottom and 1 7/8 inches long. For tractor models (4 cylinder engines) 600, 800, 900, 1801, 2000, 4000, 501, 601, 701, 801, 901. (Item #: 105385, Ref: 311276) $7.70

Fuel Cap, Non-Vented - This Silver Fuel Cap is for models 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 800, 820, 840, NAA Fuel Cap. Verify OEM number to ensure correct fit. (Item #: 185782, Ref: D5NN9030A) $9.10

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, NAA, NAB, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Item #: 184806, Ref: C5NN9030D) $9.00

Fuel Filter - Fuel Sediment Filter. For all 144 and 172 CID Diesel tractors 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. (Item #: 159728, Ref: 309991) $24.50

Fuel Filter Valve Stem to Carb Body Gasket - Gasket measures 0.389 inch inside diameter, 0.579 inch outside diameter, 0.062 inch thick. Made of fiber. For tractor models 2000 4 cylinder (4-cylinder), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 2030, 2031, 2110, 2111, 2120. (Item #: 172804, Ref: NCA99180B) $1.00

Fuel Injection Pump, Remanufactured, B9NN9A543B, Roosa Master, DBO-2933 - For Ford tractor models 800, 801, 841, 851, 861, 881, 901, 941, 961, 971, 2000, 2130, 4000, Compatible with Ford Construction and industrial models 4040, Replaces Ford OEM number B9NN9A543B, C0NN9A543J, DKPN9A543A, Replaces Roosa Master manufacturer number DBO-2933, DBGVCC429-4C, DBGVCC429-5C, DBGVCC429-8AJ, DBGVCC429-14AJ, DBGVCC429-4AJ, DBGVCC429-5AJ, (Item #: 209982) $1350.01

Fuel Line - This Fuel Line is accurate for replacement of part numbers NCA9282D / New Holland 86593249. 5/16 inch line. Overall length is 15 1/2 inches. It is used on Ford 800 and 900 series tractors with 172 cubic inch gas engines. It may also be adaptable for 1959-1964 Ford tractors with 172 cubic inch engines. Verify 5/16 inch fuel line. Will fit into C0NN9285A-WOR. If 1/4 inch fueling fittins are needed use 310918. (Item #: 158212, Ref: NCA9282D) $19.30

Fuel Sediment Screen and Gasket - Gasket and Screen Set (for 2 inch outside diameter sediment bowl). Ford 8N, 9N, 2N, NAA, 600, 601, 700, 800, 801, 900. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Shut Off Valve - With O-Ring, at fuel tank. Has 5/16 fuel line fitting. For 172 CID gas engine in tractors with serial number 126525 and up, models 801 Series, 901 Series, 4000, (1960 to 1964). Also used on some later 2000 4 cylinders with 134 engines. (Item #: 107025, Ref: C0NN9285A-WOR) $36.00

Fuel Shut Off Valve - Valve has 3/8 inch female outlet. For gas powered tractor series: 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 2000 (1955-1964), 800, 801, 900 (to serial number 126524 with 1/4 inch fuel line 1955-1960), diesel powered tractors (500, 600, 700, 800, 900, 2000, 4000) series (1958-1964). Uses fuel line 310918 or NCA9282B, 311292. (Item #: 107024, Ref: 311292WOR) $20.00

Fuel Tank - For Gasoline engines 11 gallon, no opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. It can be used for diesel if you install a diesel return line. Fits: NAA, Jubilee 1953-1954; 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 103892, Ref: NAA600800G) $200.00

Hand Throttle Control Lever Spring - This Hand Throttle Control Lever Spring is used on Ford Tractors 1953-1964. It replaces original part number NAA9806B (Item #: 182958, Ref: NAA9806B) $5.70

Main Nozzle - For tractor models 800, 900. Fits the following Marvel Schebler carburetors: TSX154, TSX156, TSX157, TSX198, TSX305, TSX319, TSX428, TSX500, TSX577, TSX580 (Item #: 189694, Ref: 312949) $24.80

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models made 1954-1965 4 cylinder: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4031, 4110, 4120, 4121, 4131, 4140. (Item #: 179751, Ref: C3NN9D532A) $6.50

Pre-Cleaner Assembly - 2" Inlet Pipe - For Ford tractor models 501, 600, 700, 800, 1800, 2000, 2110, 2120, 2130, 2300, 2310, 2600, 3000, 3055, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 4000, 4030, 4110, 4120, 4130, 4190, 4330, 4340, 4400, 4410, 4500, 4600, 5000, 5190, 5340, 5600, 6600, 6700, Compatible with Ford Construction and industrial models 231, 233, 333, 335, 340, 420, 445, 531, 532, 535, 540, 545, 2030, 3550, 4040, 4140, Replaces Ford OEM number 86555327, B9NN9A660A, Pre-Cleaner Assembly For 2" Inlet Pipe, Small Bowl [7"], Color may vary, (Item #: 112376) $29.60

Sediment Bowl Assembly - This Sediment Bowl Assembly for tractor models 2000, 600, 700, 800, 900 all with 4 cylinder small carb. Sediment bowl assembly. 1954-64 With 134 cubic inch gas and using 1/4 inch fuel line thread and 3/8 inch mounting bolt hole. 1954-57 With 172 cubic inch gas up to Serial Number 126524 with 1/4 inch fuel line thread and 3/8 inch mounting bolt. Verify fuel line and mounting bolt before ordering. Replaces OEM NCA9155D. (Item #: 105384, Ref: NCA9155D) $16.70

Sediment Bowl Gasket - 1-9/16 inch outside diameter. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to serial number 126524), 801, 901, 1801. (Item #: 111271, Ref: 311275) $2.10

$Ford 800 Sediment Bowl Retaining Bolt 3\8 Dia.$
Sediment Bowl Retaining Bolt 3/8 Dia. - Banjo bolt. Length is 1 3/8 inch with 3/8 inch diameter-24NF threads. 2000 4 cylinder, 501, 601, 701 (1958 to 1964 with 134 cubic inch engine), 801, 901, 1801 (1958 to 1960 with 172 cubic inch gas engine up to serial number 126524), 2000 4 cylinder. If you need a gasket for this bolt, order 2 of part number NCA99180B. (Item #: 126815, Ref: 86531362) $15.60

Sediment Bowl Screen - For Ford tractor models NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981 Replaces Ford OEM number 2N9161, , Compatible with Massey Ferguson tractor models Super 90 (gas s/n 888674- later), TO20, TO30, TO35 (gas), 35, 50 (gas), 65, 65 (gas), 85 (gas s/n 807751-earlier), 88, 88 (gas), Compatible with Massey Ferguson Construction and industrial models 202 (s/n 309328-earlier), 204 (s/n 343891-earlier), 302 (s/n 119700213-earlier), 304 (s/n 119750210-earlier), 356 (gas s/n 670001084-earlier), Square hole, For 2" O.D. sediment bowl, (Item #: 110833) $2.70

Sediment Bowl Screen and Gasket - For Ford tractor models NAA, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2111, 2131, 4030, 4120, 4130, 4131, 6000, Compatible with Ford Construction and industrial models 541, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number C0NN9161A, (Item #: 105386) $2.80

Thottle Control to Bellcrank Rod - This Throttle Control to Bellcrank Rod is used on non-diesel fords, 1953 to 1964 and is 4 1/4 inches overall length. It replaces original part number NAA9815C. (Item #: 183034, Ref: NAA9815C) $11.60

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Item #: 178048, Ref: NAA99778B) $14.70

Throttle Body To Bowl Gasket - For Ford tractor models 800, 900, 4000 (1958 - 1964), Replaces Ford OEM number EAF9516B, C3NN9156B, (Item #: 111269) $1.12

Throttle Body To Bowl Gasket - For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 4000, Replaces Ford OEM number EAF9519A and C3NN9516A, (Item #: 111270) $1.00

Throttle Control Rod - 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1953 thru 1964 gas only. Replaces C0NN9A790A. (Item #: 179893, Ref: NAA9815F) $25.30

Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cylinder, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-Cylinder Gas 1953 thru 1964. Replaces 86552618. (Item #: 153500, Ref: EAF9818C) $16.00

Throttle Control to Governor Rod - This Throttle Control to Governor Rod is used on Ford tractors models 600, 601, 700, 701, 501, 800, 801, 900, 901, 2000, 4000 and 1801, 1955-1965. It replaces original part number NCA99817A (Item #: 183037, Ref: NCA99817A) $18.20

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Item #: 120573, Ref: FDGAUGEKIT_4SP) $122.00

Instrument and Gauge Kit 5 Speed - For NAA, Jubilee, 600, 700 with 5 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Item #: 120574, Ref: FDGAUGEKIT_5SP) $109.00

Instrument Panel Light - 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Includes bulb, light fixture and wire leads. (Item #: 125669, Ref: S.66854) $24.20

Instrument Panel Light Assembly - 6 Volt Light Assembly. For Model: 8N. (Item #: 125711, Ref: 8NN14662A) $25.00

Instrument Panel Light Assembly - This 6 volt dash light is for tractor models: NAA, NAB, 600, 700, 800, 900. Replaces 78-13466, C3NN14662A, NCA13771A. (Item #: 125711, Ref: 8NN14662A) $25.00

Oil Pressure Gauge - For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Item #: 113472, Ref: S.61171) $17.10

Oil Pressure Gauge, 80 pound - For the following tractors (before 1965): 600, 601, 700, 701, 800, 801, 2000, 4000, NAA. Oil pressure gauge, 80 pound, 2 inch body diameter. (Item #: 110411, Ref: FAD9273A) $14.50

Oil Pressure Gauge, 80 Pound, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Item #: 121629, Ref: FAD9273A_Black) $11.60

Oil Pressure Gauge Black Bezel - For Ford tractor models NAA, 2N, 8N, 9N, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140, Replaces Ford OEM number FAD9273A, Raised Black Bezel, Black Face, Dash Mounted, 1/8" Male Pipe Threads, 0 - 80 PSI, Oil Pressure Gauge - Chrome Bezel use Item #: 110411, (Item #: 121629) $11.60

Proofmeter Drive Adapter Shaft - For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Item #: 113716, Ref: EAF17375D) $21.10

Proofmeter Drive Bolt - This Drive Bolt fits the following models with Vane and Piston Type Hydraulic Pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Item #: 113717, Ref: EAF951A) $13.20

Proofmeter Drive Bushing - For tractor models 1953 to 1964: 2000 and 4000 4 cylinder, 501, 541, 600, 700, 800, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. Verify size 1.275 overall length, 5/8 - 18 threads. Fits Vane and Piston Type Pumps. (Item #: 113715, Ref: EAF17381A) $21.40

Sending Unit Lock Ring - For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4131, 4140, 6000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number FEG99275A, Outside Diameter: 2.682", Inside Diameter: 1.895", (Item #: 164834) $13.60

Tachometer Cable - Ford Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 158307, Ref: B9NN17365B) $12.40

Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 102193, Ref: B9NN17365BSTEEL) $14.90

Tachometer (Proofmeter) - This proofmeter is used on Ford tractors 1953-1964 with 4-Cylinder Engines and 4-Speed Transmissions (1953-1964). Replaces C3NN17360N. (Item #: 100613, Ref: C3NN17360N) $29.80

Tachometer (Proofmeter) - For tractor series: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All with 4-Cylinder Engine and 5-Speed Transmissions (1955-1964). (Item #: 100614, Ref: C3NN17360K) $25.00

Tachometer (Proofmeter) Gauge - 4 Speed with OEM Style Needle - For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 941, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number C3NN17360N, 4 Speed Transmission, OEM style needle, For 5 speed gauge use Item #: 121651, (Item #: 121650) $42.00

Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch diameter, 34 inch capillary tube length. Replaces FAD10883A. NOTE, the probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Item #: 103887, Ref: C3NN18287A-Blac) $17.10

Temperature Gauge, Chrome Rim - For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch face diameter. Approximately 41-1/2 inches capillary lead length, 5/8 inch x 18 UNF fitting with 1/2 inch NPT pipe bushing. Replaces FAD10883A, and C3NN18287A. NOTE: The probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Item #: 178051, Ref: C3NN18287A-Chro) $29.20

Hitch / Drawbar

No
Picture
Coupler - Quick coupler, female half. For 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 119149, Ref: 4250-4) $25.10

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

No
Picture
Drawbar - Drawbar and Hanger Assembly for 800 series (except 820, 821). (Item #: 150688, Ref: SDA8) $155.00

Drawbar Clevis Spring Pin - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3150, 3230, 3300, 3310, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4031, 4120, 4130, 4131, 4200, 4330, 4340, 4400, 4410, 4500, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 4140, Compatible with Ford Baler (s) 530, Replaces Ford OEM number 311920, 81813066, (Item #: 115372) $0.98

Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Item #: 186635, Ref: 957E5967) $21.60

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Item #: 111911, Ref: EC0N660A) $5.20

Hanger - Drawbar Hanger. For 800, 801, 4000 4 Cylinder. 9.75 inches tall. (Item #: 173155, Ref: NDA809A) $40.00

$Ford 800 Hanger \ Bracket$
Hanger / Bracket - For Ford tractor models 800, 801, 4000, Replaces Ford OEM number NDA809A, Height: 11", (Item #: 184160) $55.00

Level Box Handle - Lever Handle. For Jubilee, NAA, 2N, 8N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. (Item #: 172986, Ref: 9N594) $9.10

Leveling Arm - Right hand leveling arm assembly. Adjustment is 20.250 inches to 25.250 inches center hole to center hole. Replaces NCA577NCA. (Item #: 110402, Ref: 6N577A) $70.00

Leveling Box Assembly Less Fork - For Ford tractor models NAA, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, Replaces Ford OEM number 8N577A, 180854M91, Without fork, For 14-3/4" Fork use Item #: 108897, (Item #: 107886) $66.00

Leveling Box Assembly, Right Hand - Right Hand Leveling Box Assembly with Fork. Adjusts 23 inches to 27 inches center hole to center hole. For Ford tractors: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000 (Except Row Crop). INDUSTRIALS: 3550, 420. Replaces NCA577A. (Item #: 179006, Ref: HLBMF62) $107.00

Leveling Box Gear - Gear, Leveling Box Pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. (Item #: 129284, Ref: B9NN568A) $9.60

Leveling Box Knuckle Pin - MUST ORDER IN QUANTITY 2, PRICED EACH. For tractor models NAA, 600, 601, 700, 701, 800, 801, 801, 701, 801, 900, 901, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 inch pin diameter, 2 7/8 inch usable length. Takes our 3/16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Item #: 111799, Ref: 9N595) $2.80

Leveling Box Knuckle, Right - Knuckle, Right Hand Leveling Assembly. Pin holes are 5/8 of an inch. The shape of the one pictured may vary slightly from different manufacturers. For tractor models NAA, Jubilee, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600. Uses 2 pins part number 9N595. (Item #: 165379, Ref: 957E566) $10.20

Leveling Box Shaft - This Leveling Box Shaft and Gear measures 14 inches long with thread length of 4 inches. Diameter is 3/4 inches. For Jubilee, NAA, Dexta, Super Dexta, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000. (Item #: 113926, Ref: NCA579B) $15.10

Leveling Box Yoke Rod, LH - Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. (Item #: 115632, Ref: C5NNB863A) $21.60

Leveling Rod Assembly, Left Hand - Left Hand Leveling Arm Assembly. Fits models: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 4000. Includes: C5NNB863A rod, NCA585B fork, and 957E566 knuckle. Adjusts from 21 1/2 inches to 24 1/2 inches. Replaces NCA564B, C5NN564D. (Item #: 118481, Ref: 6N564B) $68.00

Leveling Rod Fork - Fork for leveling rod, Right hand side. Length 14-3/4 inches. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Item #: 110971, Ref: NCA585B) $32.12

Lower Lift Arm, LH - Left hand Category I lift arm has 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, (1955-1964); 2000, 2600, 3000, 3600 (1965-1981), 4000. Replaces D0NN555C (Item #: 111312, Ref: D0NN555CLH) $56.00

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.80

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

Lower Lift Arm, RH - This category I lift arm is Right hand. 31.625 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850 (1955-64); 2000, 2600, 3000, 3600 (1965-81). Replaces D0NN555D (Item #: 111313, Ref: D0NN555DRH) $58.00

$Ford 800 Lower Lift Arm R\H (Cat 1\1)$
Lower Lift Arm R/H (Cat 1/1) - Lower Link Lift Arm R/H (Cat 1/1) measures 32 7/8 inches in length, 3 9/16 in width, and 5/8 in thickness. Applicable for 20 0-4000 (4 cyl) 2000, 2100, 2110, 2120, 2150, 230, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3100, 3120, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3600N, 3600V, 3610, 3610N, 3910, 3910N, 4000, 4110, 4110N, 4140, 4600, 4610, 4610N, 530, 531, 600, 601, 700, 701, 800, 801, 900, 901. Replaces 81815827 and E5NN555AA11Z. (Item #: 191080, Ref: C5NN555AN) $44.98

No
Picture
Lower Lift Link Pin - For tractor models (2000, 4000 4 cylinder), 800, 820, 840, 850, 900 950, 960 1/1955 and up. (Item #: 172657, Ref: NCB563A) $33.70

$Ford 800 Lower Link Support Pin, 5 1\8 Inches$
Lower Link Support Pin, 5 1/8 Inches - This Lower Link Support Pin measures 5 1/8 inches long. It is for tractors less Differential Lock for models 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA. Replaces NCA563C, 81801640, 87712982 (Item #: 154027, Ref: NCA563C) $18.10

Pin Clip Kit - Kit, Pin (C5NN807D) and Spring Clip (311920). Tractors 2000, 3000, 4000 (1965 and up). Also services earlier models (1953 to 1964) using swinging drawbar: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. This pin is 7/8 inch in diameter and 2-3/4 inches long. Replaces 311920, C5NN807D, CBPN804A, E4NN807AA, 83948134. (Item #: 187117, Ref: CBPN804A) $7.10

Stabilizer Arm - Stabilizer arm measures length 31-1/2 inches center to center. For tractor models 2N, 600, 800, 8N, 9N, Jubilee, NAA, 2000 (4 cylinder), some 4000 (4 cylinder). Color of part can be red or primer depending on supply. (Item #: 110516, Ref: 230042R) $15.30

Stabilizer Arm Blue - Arm only, blue. 31.50 inches center to center on holes. 7/8 inch pin holes. Replaces 230042 (Item #: 180774, Ref: 230042B) $20.10

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Item #: 111709, Ref: 231254) $13.00

Stabilizer Kit - 3 Point - Kit contains Stabilizer Brackets, Stabilizer Pins, Stabilizer Arms (Category 1). Comes primered (color may vary). Prior to painting check fitment. Compatible with Ford Tractor(s) NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 (Item #: 152386, Ref: 231253) $60.00

Stay Strap, Lower - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (R3575). Color varies. Replaces 9N5375B (Item #: 179230, Ref: 9N5375B) $14.70

Stay Strap, Lower Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Item #: 111112, Ref: 9N5375) $6.98

Stay Strap, Upper Blue - Painted blue, 25.500 inches long, .250 inches thick, 1.500 inches wide, .937 inch hole, .613 inch x 6.625 inch slot. For tractor models 600, 700, 800, 8N, 900, 9N, NAA. (Item #: 111113, Ref: 9N5374B) $8.30

Stay Strap, Upper Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Item #: 111113, Ref: 9N5374) $8.30

Swinging Drawbar Clevis Assembly - Clevis Assembly with Pins for SDA6 or SDA8 kits. For tractor models 8N, NAA, NAB, 600, 601, 800, 801, 1801, 2000 4 cylinder, 4000 4 cylinder. (Item #: 178030, Ref: NCA803B) $40.00

Swinging Drawbar Clevis Pin - This Swinging Draw bar Clevis Pin is the original style and will only work with original style drawbar hangers. Measures 1 1/8 inch diameter and 2 1/2 inches in length without head. Used on Ford Tractors, 1948-1956 (Item #: 183030, Ref: 8N804) $12.80

Swinging Drawbar Kit - Swinging Drawbar Kit - Fits: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, (and 4 cylinder 4000 except Rowcrop). Contains: drawbar, hanger, clevis and pin. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. (Item #: 150688, Ref: FDS302) $155.00

Thrust Bearing - Leveling Box Assembly Bearing. For 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600, Dexta, Super Dexta, Jubilee, NAA. (Item #: 179766, Ref: 9N554) $7.90

No
Picture
Top Link Bracket, Used - For Ford tractor models NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 1800, 2031, 4031, 4120, 4121, 4130, 4131, 4140, Replaces Ford OEM number NCA535A, Drilled for 1" Pivot Pin, For a new version of this item use Item #: 126752, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435906) $36.00

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Item #: 126752, Ref: NCA535A) $59.00

Hydraulic System

No
Picture
Body Half Female - Coupler For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 120882, Ref: 8250-4) $55.00

Breakaway Clamp, Double - Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 112480, Ref: 5006-4) $29.95

Clamp - Double Break-Away Clamp. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 5900, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 178602, Ref: 9006-4) $42.00

Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 and Safeway type S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this clamp. Used on tractors with Single Pump Hydraulic System, 1955 thru 1981 models. For tractor models 500, 600, 700, 800, 900, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 112480, Ref: S42-4) $29.95

Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7/16 inches in diameter, smooth type, 2-3/4 inch spacing. 1-3/8 inch relief diameter, 9/16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Item #: 112100, Ref: 290421) $43.00

Cylinder, Side Link - Side Link Hydraulic Cylinder. (Item #: 178907, Ref: HSL3201) $335.00

Cylinder, Top Link - Top Link Hydraulic Cylinder. (Item #: 167107, Ref: HTL3101) $344.00

Cylinder without Valve - Hydraulic Cylinder without Unload Valve and without piston is a 3 inch bore. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. (Item #: 179993, Ref: C5NN477BLV) $305.00

Cylinder with Unload Valve - This Hydraulic Cylinder with Unload Valve and With Piston is a 3 inch bore. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, Dexta, Super Dexta. MAY OR MAY NOT COME PAINTED. (Item #: 180175, Ref: C5NN477B) $691.00

Double Spool Remote Valve Kit - This Double Spool Double Acting Hydraulic Remote Valve Kit includes valve, levers, o-rings and hoses. Depending on application, hoses may need an extra fitting to lengthen. Hose bracket and female couplers. Non detent, spring centering. Mounts on the lift cover (under the seat). Some seat brackets may have to be modified for clearance. Use with 8010-4 male plugs for the couplers (not included). Will not fit compact tractors. Will NOT fit NAA, Jubilee, Golden Jubilee (bolt pattern is different). 3/8 inch BSP threaded hoses. Replaces 309973, 309973F, 309996, 80309973, 83928704, 83944762, C9NNB950B, E1NNB950BA, E1NNB950BB (Item #: 168679, Ref: E1NNB950BB) $620.00

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Item #: 111890, Ref: 8N541B) $40.00

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Item #: 165989, Ref: 9N547B) $37.00

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Item #: 178070, Ref: 9N527) $16.30

Draft Control Spring Plate, with Pin - This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Item #: 178077, Ref: 8N527) $19.10

Draft Control Spring Seat - Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Item #: 178127, Ref: 2N624) $9.30

Dust Cover - Automatic dust covers. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 5900, 600, 6600, 700, 800, 900 (Item #: 172487, Ref: 9507-4-1H) $54.21

Felt, Spring Seat - Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Item #: 178061, Ref: 9N529) $3.20

Friction Disc for Hydraulic Control Lever - Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Item #: 111446, Ref: C5NN518B) $1.80

Gasket, Hydraulic Pump Drain - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Hose Bracket - Hydraulic Hose Coupler Bracket. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5900, 500, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 179700, Ref: D6NND916D) $27.80

Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3/8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 111565, Ref: HV4902) $89.00

Hydraulic hose Assembly - Hydraulic Hose with fittings is 26 inches in length. The straight end has 1/2 inch NPT and the 90 degree end has 9/16 inch ORB. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 179212, Ref: H31-SPL-26) $41.90

No
Picture
Hydraulic hose Assembly - Hose, 44". (Item #: 179992, Ref: HV4977) $41.20

No
Picture
Hydraulic Hose Assembly - Hose, 18. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179990, Ref: HV4970) $33.50

No
Picture
Hydraulic Hose Assembly - Hose, 21. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179991, Ref: HV4971) $34.30

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $29.90

Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if piston has been changed to o-ring and back-up ring style. E11GF9 single groove gland seal is available separately. (Item #: 113538, Ref: LCRK5564) $7.00

Hydraulic Lift Cylinder Piston - Piston ONLY. Back-up ring NCA473A and o-ring seal 87111S95 are NOT included. This lift cylinder piston is 3 inches in diameter. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 3000, 3600, 4000, Dexta, Super Dexta. Replaces C5NN530B. (Item #: 155015, Ref: C5NN530B) $27.30

Hydraulic Lift Cylinder Piston O-Ring - This o-ring is used with C5NN530B 3 inch piston. Fits Models: 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4110LCG, Dexta, Super Dexta. Replaces 87111S95, 381871R1, 81845041. (Item #: 173006, Ref: 87111S95) $0.90

Hydraulic Lift Cylinder Piston Washer - This Backing Washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Item #: 170949, Ref: NCA473A) $3.50

Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Item #: 178133, Ref: S.66598) $20.60

Hydraulic Lift Oil Level Dipstick - Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Item #: 126537, Ref: NCA927B) $20.60

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Item #: 155017, Ref: 86563314) $32.40

Hydraulic Lift Ram Arm - For 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All before 1965 and with 4 cylinder engines. (Item #: 161833, Ref: NCA545B) $80.00

Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Item #: 165431, Ref: NCA544B) $419.08

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Item #: 114032, Ref: 9N543B) $52.00

Hydraulic Lift Shaft Bushing - This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3/8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Item #: 173523, Ref: 9N531C) $14.20

Hydraulic Pump - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. This item may take up to two weeks for delivery. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 126603, Ref: NAA600D) $900.00

Hydraulic Pump Cover and Pin - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 312059, NCA893A, For Piston Pump Only, (Item #: 113714) $104.00

Hydraulic Pump Cover Gasket - For Ford tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Replaces OEM number D6NN867A, (Item #: 160522) $2.30

Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3/4 inch diameter, 9-1/4 inch overall length. End A type: key, 3/4 inch size, End B type: 6 spline, 3/4 inch size. Associated components end A flex. coupler: L601-14 (3/4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Item #: 112068, Ref: 194355) $28.10

Hydraulic Pump Drive Shaft - Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Item #: 111747, Ref: 195454) $39.00

Hydraulic Pump Gasket Kit - Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 182513, Ref: FPN910B) $31.50

Hydraulic Pump Gear - Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000 4 cylinder, 4000 4 cylinder, 600 Series, 601 Series, 700 Series, 701 Series, 800 Series, 801 Series, 900 Series, 901 Series. Replaces C0NN908A (Item #: 112072, Ref: C3NN908A) $36.10

Hydraulic Pump Gear Housing - For tractor models NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 113718, Ref: NCA905C) $224.00

Hydraulic Pump Hub - Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7/8 inch outside diameter, 2 3/4 inches center to center on holes. 6 spline center bore, 3/4 inch inside diameter, 7/16 inch smooth ID mounting holes. (Item #: 111639, Ref: 54C2055) $39.98

Hydraulic Pump Mounting Gasket - On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vane type hydraulic pumps to the engine. (Item #: 167408, Ref: EAF911B) $1.20

Hydraulic Pump Needle Bearing - Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Item #: 123075, Ref: NCA881A) $11.20

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5/8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Item #: 184993, Ref: NCA615C) $11.10

Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Item #: 170934, Ref: C0NN852A) $34.00

Hydraulic Pump, Remanufactured - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. The is a remanufactured version of NAA600D. Add $250.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. This item may take up to two weeks for delivery. (Item #: 205308, Ref: NAA600DR) $1080.01

Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Item #: 111682, Ref: CCPN600AB) $55.00

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Item #: 111681, Ref: NCA966E) $74.00

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114636, Ref: D5NN1201A) $6.00

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114635, Ref: D5NN1202A) $2.80

Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3/4 ", SHAFT OVERALL LENGTH: 8-3/8 ", END A TYPE: Key, END A SIZE: 3/4 ", END B TYPE: 10 Spline, END B SIZE: 1 ". (Item #: 172481, Ref: 197118) $41.30

No
Picture
Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 117609, Ref: NCA851A) $6.60

Hydraulic Pump Valve Assembly - Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAB. It replaces original part numbers 86512642 and NCA638C. (Item #: 178920, Ref: NCA638C) $132.00

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref: C0NN858A) $46.50

Hydraulic Valve Kit - Valve, Hydraulic, with handle, Single-Spool Multi-Valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 degree rotated handle. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 183392, Ref: HV4012) $297.00

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185318, Ref: HV4021) $728.00

Hydraulic Valve Kit - Kit Assembly, includes 2-Spool Valve with handle. Fits Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180002, Ref: HV4120) $1089.01

Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handle (has float on one spool). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. NIS (Item #: 183391, Ref: HV4121) $973.00

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185320, Ref: HV4020) $665.00

Hydraulic Valve O-Ring Kit - Hydraulic Valve Mounting O-Ring Kit. For 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 163398, Ref: DHPN485A) $8.70

Hydraulic Valve Seal Kit - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 681, 700, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230 (no cab), 3300, 3310, 3330, 3400, 3430 (no cab), 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130 (no cab), 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830 (no cab), 5000, 5030 (no cab), 5100, 5200, 5340, 7000, 7100, 7200, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 530A, 531, 3550, 4140, 4400, 4500, Replaces Ford OEM number 83900081, (Item #: 161249) $6.80

Lift Cylinder Safety Valve - For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3600, 3600V, 3610, 3900, 3910, 4000, (4110, 4120, 420, 445, 445A, 450, 4600, 4600SU, 4610, 515, 545A, 600, 6000, 601 1962-1964, ) 650, 660, 701, 800, 801, Dexta, Super Dexta. Also replaces 957E9842 and C5NN984A. (Item #: 169627, Ref: 957E984B) $21.00

Pivot Pin Nut - This Nut is used with D2NNH889A Pivot Pin. Replaces C9NNH891A, 86632551 (Item #: 180243, Ref: C9NNH891A) $0.50

Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $29.90

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Item #: 126615, Ref: 9N521) $8.10

Remote Control Kit - Single Spool, Single/Double Acting with Hoses - Female Couplers. This valve is spring loaded to neutral.For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Item #: 154875, Ref: S.68981) $310.00

Rod Pivot - Pivot for Hydraulic Control Valve Handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Item #: 183852, Ref: C9NND912A) $30.70

Selector Valve - The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Item #: 116871, Ref: E0NND960AA) $208.00

Swivel - Draft Control - For tractor models NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except Row Crop), Dexta, Super Dexta. (Item #: 185370, Ref: 957E692) $26.45

No
Picture
Valve - Valve, Single-Spool, (Non-Detent/Spring Centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 6600, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180424, Ref: E1NNB950AB) $620.00

No
Picture
Valve - Valve, Double-Spool, Pressure Detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: E2NNB950CA) $930.29

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 178924, Ref: HV5902) $199.00

Valve Handle - Handle with blue vinyl coated grip, for 1 and 2 Spool Valves. Overall length 11 1/4 inches. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 182840, Ref: D3NNB936A) $32.00

Valve Kit, 1 Spool - Kit Assembly, includes 1-Spool Valve (Non-Detent/Spring Centering), Hoses, Dust Cover, Couplers, Handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180000, Ref: DGPNB950S1-KIT) $964.00

Valve Kit, 1 Spool - These kits include Single Spool Valve (Non-Detent/Spring Centering), Hoses, Hose Couplers, Coupler Bracket, Self Closing Dust Covers and Handle Mounting Kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Item #: 180000, Ref: DGPNB950S1-KIT) $964.00

Valve Less Handle - Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 178975, Ref: HV4023) $536.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Item #: 180405, Ref: HV4033) $722.00

No
Picture
Valve Mount Kit - Handle and Valve Mounting Kit, Single-Spool. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 309972F) $41.61

No
Picture
Valve Mount Kit - Handle and valve mounting kit, single-spool. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Item #: 179210, Ref: 309973F) $243.00

Vane Style Hydraulic Pump Shaft - This Vane Style Hydraulic Pump Shaft comes with drive key. It is used on Ford 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 940, 950, 960 all using square vane hydraulic pumps (1954 to 1955; up to serial number 66849). It is 4.442 inches long, it has a 0.601 inch outside diameter on the keyed end and a 0.450 inch outside diameter on the splined end. It replaces key: 356961-S and shaft: NCA966A. (Item #: 180394, Ref: NCA966A) $126.00

Vane Type Hydraulic Pump Kit - For 5/8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Item #: 178623, Ref: CPN972B) $485.01

Vane Type Hydraulic Pump Kit - For 3/4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B (Item #: 178627, Ref: CPN972C) $485.01

Implements

Valve Lever Pivot Pin, Pack of 2 - This Valve Lever Pivot Pin is for factory remote valves. It is used with: C9NNH891A Nut, D3NNB936A Lever and C9NND912A Pivot. Replaces D2NNH889A, 81834237 (Item #: 133463, Ref: D2NNH889A) $12.10

Lights

Headlight Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body and bezel, grey enamel finish. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Item #: 105329, Ref: 310066F) $57.00

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Item #: 111329, Ref: FAA13102A) $5.60

Headlight Rim - Headlight Rim, grey finish. Ring with bolt for 310066 (6 Volt) and 310068 (12 Volt) 5 7/8 inch diameter light units. For 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700, NAA. (Item #: 179208, Ref: C0NN13045B) $17.10

Headlight Set, 12 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. (Item #: 183740, Ref: 2N13005-12V) $159.00

Headlight Set - 6 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. Replacement sealed beam bulbs available as p/n L4019. (Item #: 183751, Ref: 2N13005-6V) $152.00

Light Rim - Headlight Door Assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. This rim is 3/4 inch in width. (Item #: 178057, Ref: 2N13043) $21.60

No
Picture
Light Rim CHROME - For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. Replaces 2N13043. (Item #: 184649, Ref: S.67891) $22.60

Light Switch - Switch with nut. This switch comes with a large knob for easy push / pull. For the original style with knurled knob, order FDN11654AOE. For 2000, 4000, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Item #: 121151, Ref: FDN11654A) $7.50

Light Switch, OEM Style Knob - If you want your tractor to look as original as possible, this light switch has a knurled knob, like when it was new! Used on Ford tractors, 1955-1964 (Item #: 178063, Ref: FDN11654AOE) $9.40

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.50

Sealed Beam Bulb, 6 Inch - The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. It replaces Ford part number 310061. (Item #: 111244, Ref: 1002802M91) $18.90

Tailight Assembly - DUOLAMP tailight and bracket assembly with FOMOCO lens (plastic). For Ford tractors 1955 to 1957. Replaces original part number NCA13402A (Item #: 126633, Ref: NCA13402A) $85.65

Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA and Jubilee, also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Item #: 179220, Ref: FAA13402A) $57.08

$Ford 800 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $0.50

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Item #: 125325, Ref: 8N13423) $10.00

Tail Lite, License Light, Clear Glass Lens - This Tail Lite is used with 'Taurus' style tail lights, originally used 1939-1947. It may be found on later tractors if a Taurus lamp was used. Uses Gasket FAA13447A, not included. (Item #: 183031, Ref: 9N13445) $12.20

Tail Lite, License Light, Lens Gasket - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. Replaces 40-13460, FAA13447A (Item #: 178109, Ref: FAA13447A) $4.50

Work Light Assembly - 12 Volt - Worklight assembly, 12-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Item #: 183741, Ref: 8N15500-12V) $92.00

Work Light Assembly - 12 Volt Econ - This is an economy version of 8N15500-12V Worklight assembly. It is 12-volt sealed beam with on/off switch. It is close to original, but not exact. Includes 8N15532 fender bracket spacer. (Item #: 116776, Ref: 8N1550012VECON) $53.00

Work Light Assembly - 6 Volt - Worklight assembly, 6-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Item #: 125140, Ref: 8N15500-6V) $112.00

Work Light Bulb, 6V - This is a 6 volt, 4 1/2 inch sealed beam bulb with dimpled lens. It replaces original part number 8N15514 (Item #: 182789, Ref: 8N15514) $71.37

Worklight Kit, 6 Volt, Chrome - Kit includes, 6 inch steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount (socket), and switch. Assembly required. For tractor models 8N, 9N, 2N, NAA, 600, 800. (Item #: 180003, Ref: S.43377) $92.00

Worklight Mounting Socket - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Item #: 178566, Ref: 8N15532) $14.70

Miscellaneous

No
Picture
Drive Clutch Piston Spring Retainer Snap Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 501, 541, 600, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3600, 4000, 4000SU, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 5000, 5100, 5110, 5200, 5600, 5610, 5610S, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4400, 4500, 8400 Replaces Ford OEM number PBB77517A, , Compatible with New Holland tractor models TB100, TB110, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number PBB77517A, (Item #: 176669) $5.50

Oil System

Dipstick, Engine Oil - Engine Oil Level Indicator measures about 14 3/4 inches overall length for 4 Cylinder Gas and Diesel, pre 1965. For tractor models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 122139, Ref: C0NN6750B) $10.00

Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Item #: 178074, Ref: EAF6866A) $10.00

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Item #: 110499, Ref: 8N6734) $1.70

Oil Filler & Breather Cap - Oil filler and breather cap. Economy style for a pipe with a diameter of 1-1/2". OEM 8N6766B. Compatible with Ford Tractor(s) NAA, 2N, 8N, 9N, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (Item #: 113708) $4.98

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Item #: 189611, Ref: 8N6782A) $6.90

Oil Filler Cap with Element - Oil filler cap measures 3 1/2 inches diameter. Insert is 1 1/4 inches outside diameter. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8 inches, 1 1/2 inch diameter tube and tube is 1 3/8 inches long. Also replaces OEM 8N6766B. (Item #: 121246, Ref: 310030) $10.00

Oil Filter - Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3/4 inches long, 4 inch diameter with 3/4 inch diameter holes in each end. (Item #: 119300, Ref: CPN6731B) $16.60

Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. Replaces ECG6890A, EAA6838A, 87644685, CPN6882A (Item #: 115244, Ref: CPN6882A) $39.00

Oil Filter Mounting Gasket - This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Item #: 172949, Ref: EAA6838A) $1.30

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825. (40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.20

Oil Pan Plug Kit - Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 108080, Ref: 9N6730WG) $20.50

Oil Pump Cover Gasket - Used on Ford 4 cylinder tractors, 1952-1964 with gear type oil pumps. (Item #: 189623, Ref: EAA6619C) $4.00

Oil Pump Drive Shaft, Hex - This Hex Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1954-1964. May also be in a 1952-1953 (Item #: 182495, Ref: EAF66646D) $26.00

Oil Pump Drive Shaft, Slotted. - This Slot Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1952-1953. May also be in a 1954-1964 if using a slot shaft Oil Pump. (Item #: 166349, Ref: EAF66646B) $8.30

Oil Pump Gear - Gear, Oil Pump Driven. For tractor models 2000, 4000, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Item #: 179980, Ref: EAA6614B) $33.41

Oil Pump, Hex Drive - Gear Type For applications with hex drive shafts (Shaft not included). For 134/172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Item #: 123913, Ref: EAE6621AB) $82.00

Oil Pump Kit - Complete kit, for gear type pump. Check unit before ordering to be certain it has not been converted to rotor type pump using kit C3AE6608B. For tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 123917, Ref: FPN6600A) $62.00

Paint

No
Picture
Ford Red Tractor Paint, 1 Gallon - For tractor models (1948-1957). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108327, Ref: TP2822GAL) $61.00

No
Picture
Ford Red Tractor Paint, 1 Quart - For tractor models (1948-1957). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108326, Ref: TP2822QT) $21.90

No
Picture
Paint, Brownish Medium Gray, 1 Gallon - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 185240, Ref: TP245GAL) $120.00

No
Picture
Paint, FORD Red, Spray Can - For tractor models (1948-1957). FORD red, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108325, Ref: TP2822SP) $7.90

No
Picture
Paint, Medium Gray, 1 Gallon - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100719, Ref: TP240GAL) $61.00

PTO / Driveline

Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Item #: 180397, Ref: 9N715BC) $6.10

PTO Cap - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Item #: 109510, Ref: 310088) $7.80

PTO Cap - This PTO Cap is for 1-1/8 or 1-3/8 inch PTO shafts. Like original. 3 1/2 inches in length. Inside usable length is 2 7/8 inches. Replaces 2N726, NCA726A, 2N726, NCA726A (Item #: 125614, Ref: 2N726) $9.30

PTO Cap - Short - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 4190, 4200, 4330, 4340, 4400, 4410, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4040, 4140, 4500, Replaces Ford OEM number 310088F, (Item #: 155022) $9.40

No
Picture
PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Item #: 172548, Ref: NAA70038C) $18.40

PTO Coupler - This PTO Coupler is inside the tractor. It is used on 4 and 5 speed transmissions, 1955 and later. It is 2.16 inches long. (Item #: 173003, Ref: NCA717A) $103.00

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Item #: 109986, Ref: C5NN747A) $1.00

PTO Plate, Remanufactured, F0NN7550EA - For Ford tractor models Dexta (1955 - 1964), Super Dexta (1955 - 1964), 600 (1955 - 1964), 601 (1955 - 1964), 700 (1955 - 1964), 701 (1955 - 1964), 800 (1955 - 1964), 801 (1955 - 1964), 900 (1955 - 1964), 901 (1955 - 1964), 1800 (1955 - 1964), 2000 (1955 - 1964), 2031 (1955 - 1964), 2100 (1955 - 1964), 2110 (1955 - 1964), 2111 (1955 - 1964), 2130 (1955 - 1964), 2131 (1955 - 1964), 4000 (1955 - 1964), Replaces Ford OEM number F0NN7550EA, D8NN7550EA, E55GC9, 82006018, Clutch Size: 9", Clutch Hub: 1-7/8", Clutch Spline: 29, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206250) $76.00

PTO Shaft - PTO shaft, 32-11/16 inch. Converts standard NCA710B shaft to 1-3/8 inch splines. For 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 191024, Ref: NCA710-38) $68.00

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Item #: 178129, Ref: E75GE9) $7.00

PTO Shaft, Conversion Assembly - PTO Conversion Assembly. Converts to 1-3/8 inch shaft. Ford tractors: 600, 700, 800, 900. DOES NOT FIT SELECT-O-SPEED models. Includes all necessary parts: Shaft, bearing, bushing, seal for tractors which had factory installed 1-3/8 inch diameter shafts which include the 501, 601, 701, 801, 901, 2000 4 cylinder, 4000 4 cylinder (converts 1-1/8 inch diameter shaft to 1-3/8 inch diameter shaft, 6 spline). Length 32 11/16 inches. If you need a gasket, order C5NN747A. For a cap, order 310088 or 2N726. (Item #: 111553, Ref: NCA700-38) $110.00

PTO Shaft Housing - PTO Shaft Housing. For 2000, 4000, 600, 700, 800, 900. All originally equipped with 1 3/8 inch PTO shaft. (Item #: 172872, Ref: 310089) $100.00

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1/8 inch or 1-3/8 inch PTO shaft. 2.45 inch outside diameter, 1 5/8 inch inside diameter, 5/8 inches wide. Replaces OEM numbers : D8NN703AA and D9NN703BA, and 9N703B. (Item #: 111314, Ref: D9NN703BB) $4.00

PTO Shaft Seal, Double Lip - Outside diameter 2.45 inches, inside diameter 1-5/8 inches, 5/8 inches wide. For tractors with 1-1/8 inch to 1-3/8 inch PTO including 4, 6, 7 and 8 speed transmissions. Models: 8N, 9N, 2N, NAA, Jubilee, 600 (Series), 800 (Series), 2000, 3000, 3550, 4000, (1965-1975), 2600, 3600, 4100, 4600, (1975-1981), 2610, 3610, 3910, 4110, 4610, (1981-up). Replaces 9N703B, D8NN703AA, D9NN703BA. (Item #: 111314, Ref: D9NN703BB) $4.00

PTO Shaft Sleeve - For tractor models 2000, 3000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. All with 1 3/8 inch PTO diameter. Replaces 310087, E7NN797BA, 83964336. (Item #: 160091, Ref: E7NN797BA) $8.10

$Ford 800 PTO Shaft Sleeve Bushing, 1-1\8$
PTO Shaft Sleeve Bushing, 1-1/8 - For 1-1/8 inch PTO Shafts (NOT 1-3/8 inch) 1.113 inch inside diameter, 1.620 inch outside diameter, 1 inch thick. For tractor models 9N, NAA (1953 to 1954), 2N, 8N, NAB, 600, 700, 800, 900. (Item #: 158215, Ref: 9N735B) $7.70

$Ford 800 PTO Shaft Sleeve Bushing, 1-3\8$
PTO Shaft Sleeve Bushing, 1-3/8 - For 1-3/8 inch PTO Shafts, 1.185 inch inside diameter, 1.620 inch outside diameter. For tractor models 9N, NAA (1953-54), 2N, 8N, NAB, 600, 700, 800, 900. all with 1-3/8 inch PTO shaft. (Item #: 173070, Ref: 9N73538) $6.90

PTO Shaft Thrust Bushing - This Thrust Bushing for the PTO Shaft measures .930 inches long and 1.634 inches inside diameter. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA. All with 1.125 inch or 1.375 inch diameter PTO shaft. (Item #: 169903, Ref: NAA798A) $34.10

PTO Stop - This PTO Stop is used on 3, 4 and 5 speed transmissions. 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000-4000 4 CYLINDER, 2000, 3000, 3400. (Item #: 113727, Ref: NAA722A) $20.20

Snap Ring - The is a PTO Housing Bearing Retaining Snap Ring measures about 3 1/8 inches outside diameter and 2 5/8 inches inside diameter. It is used on multiple Ford Tractors using a 1.375 inch PTO. Replaces original part numbers 81809581 and 314267. For tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 and 4000. (Item #: 172927, Ref: 314267) $13.70

Seats

Pan Seat - This 19 inch wide Fixed Seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, all with 4 Cylinder Engine. This is not a Flip-Over Seat. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $50.00

Pan Seat - 19 inch wide Flip-Over Style. Replaces OEM number C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 8N, 9N, 2N (4-Cylinder). May come different color than pictured. (Item #: 101239, Ref: C5NN400AE) $60.00

Seat Cushion, Blue - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is blue with a FORD script logo. (Item #: 178635, Ref: 9N401B) $48.20

Seat Cushion (Blue and White) - For all Ford Tractors with 21 inch wide Steel Pan Seat. This seat cushion is blue and white with a FORD script logo. (Item #: 179048, Ref: R4120) $44.30

Seat Cushion (Red) - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red with a FORD script logo. (Item #: 178636, Ref: 8N401R) $48.20

Seat Cushion (Red and White) - Seat Cushion. Deluxe with 2 inches of foam padding. For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red and white with a FORD script logo. (Item #: 180739, Ref: R4118) $28.70

Seat Hinge - Fits Models: 8N, NAA, 2000, 4000, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 900, 960. Can replace OEM part number 86531095. This hinge is made for the 2 3/8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Item #: 101240, Ref: R0643) $20.00

Seat Pin and Bushing Kit - For tractor models (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000 all with Rest-O-Ride seat), 4000, 4100, 4110, 4130, 4140, (6000 with regular seat). (Item #: 179145, Ref: R5117) $40.50

Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 with 4 cylinder engine. 2 3/8 inches wide. May require modification of bolt holes for an original hinge. (Item #: 101241, Ref: NCA404B) $52.21

No
Picture
Seat Spring, Non-Flip, Used - For Ford tractor models NAA, 2N, 8N, 9N, 600, 800, 2000, Replaces Ford OEM number 9N404, Flat Spring, For Non Flip Seat, For a new version of this item use Item #: 101242, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435282) $34.80

Seat Spring, Rubber - Left - For Rest-O-Ride Seat on models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 1800, 2000, 4000. Rubber Seat Spring - Left. Price is for a SINGLE spring. (Item #: 105322, Ref: NDA448A) $48.00

Seat Spring, Rubber - Right - For Rest-O-Ride Seat on Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 1800, 2000, 4000. Rubber Seat Spring - Right. Price is for a SINGLE spring. (Item #: 105323, Ref: NDA447A) $44.00

No
Picture
Tie-On Seat Cover - Tie-On Seat Cover. 19 inch Tie-On Cover with White Script Ford Logo. Fits models: NAA, 2N, 8N, 9N, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 4000. (Item #: 178809, Ref: R4117) $36.30

Sheet Metal / Body Parts

Air Cleaner Door - Air Cleaner Louvered Door restoration quality. For NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 158443, Ref: NAA9661B) $24.30

Battery Box - For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953 to 1964. Replaces NCA 10432A. Comes with a rough coat of primer. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN and NCA10728WN. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104045, Ref: C0NN10732T) $43.00

Battery Cover, Restoration Quality - Battery cover with access door and decals, also with round cable opening. Exact of original (powder coated red). Fits Jubilee, NAA, NAB, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960 all with 6 volt batteries and round battery cable. Replaces NAA5162A, NCA10718A. (Item #: 178411, Ref: NAA5162) $63.00

Bumper - This is a new aftermarket style Bumper. It has a trailer hitch. Comes primer coated. Used on NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (1962-1964), 3000, 4000SU, 2600, 3600, 4100, 4600SU, 2610, 3610, 4110, 4610SU. (Item #: 113512, Ref: S.60709) $138.00

Bumper - For NAA, Jubilee, 600 and 800 Series (thru 1964), 2000 and 3000 (1965 and up), 2600, 3600, 4600 (1975 and up), 8N, 9N, 2N - has 4 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Axle mount with mounting brackets. This is an aftermarket item. Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113512, Ref: BU1021) $138.00

Bumper Bolt Kit - For Ford tractor models NAA, 600, 601, 800, 801, 2000, 2031, 2130, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4121, 4131, 4140, 4200, Compatible with Massey Ferguson tractor models TO35, 35, Replaces OEM number 351505S8, 33806S34, 354369S8, Used on bumpers 104060, 113401, 113512, 113511, Zinc Plated, Includes 2 Bolts, Flat Washers, Lock Washers, Nuts, 5-8 x 18 x 4", (Item #: 126104) $14.70

Bumper Bolt Kit 4 Pieces - Bumper Bolt kit, front axle bolt kit, contains 2-3.40 inch bolts, 2-4 inch bolts, 4-351505S8 washers and hex nuts. For tractors: 8N, 9N, 2N, NAA, 600, 800 {1939-1957}. For 600, 700, 800, 900, NAA. (Item #: 178018, Ref: 350790-KIT) $16.60

Bumper - Heavy Duty - For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000, (4000SU with I-Beam Front Bumper). Additional $15 shipping due to weight. Welded, not riveted. Slightly different than original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104060, Ref: 311541HD) $225.31

Bumper Kit - This grill to side panel bumper kit is used on many 4 cylinder Ford models: Jubilee, NAA, 2000, 2030, 2031, 600, 601 and 800 from 1953 to 1962. Replaces: NAA88227B 88227-K. (Item #: 178197, Ref: 88227K) $4.80

Bumpers 6 Per PKG - Bumper, Hood Tip Center Panel Rubber Bumper Kit {6 per pkg}. For tractors: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1953-1957}. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178019, Ref: 354177S6) $5.30

Bumper, Side Panel To Hood - This pad fits between the top of the front side panels and the hood. Used on Ford Tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. It is glued in place. Replaces original part number NAA88131B. (Item #: 178076, Ref: NAA88131B) $3.98

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Item #: 104070, Ref: D5NN16312LR) $117.00

Fender - This Fender Skin, (bracket not included) measures about 21.5 inches by 42.5 inches. Replaces right hand or left hand side. For tractor models 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155688, Ref: E1NN16315DA) $75.00

Fender Bolt Kit - For Ford tractor models NAA (when not equipped with sway bar brackets or loader brackets), 2N, 8N, 9N, 501, 540, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (4 cylinder), 2031, 2110, 2111, 2120, 2130, 2131, 4000 (4 cylinder), 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Compatible with Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 30, 35, 40, 50 (when not equipped with sway bar brackets or loader brackets), 65, 135, 150, 230, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50 (when not equipped with sway bar brackets or loader brackets), 65, 202, 203, 204, 205, 2135, 2200, Compatible with Massey Harris tractor models 50 (when not equipped with sway bar brackets or loader brackets), Compatible with Oliver tractor models Super 55, 550 (when not equipped with sway bar brackets or loader brackets), Compatible with White tractor models 2-44 (when not equipped with sway bar brackets or loader brackets), Replaces OEM number 353648X14, 364918X14, 375651S8, 3541315S36, 372457S36, 900157, Kit includes 4 (6-1/2") carriage bolts (5/8" NC), nuts, lock washers, Use with fenders 100026, 104069, 104070, 104072, 125421, For OEM Quality use Item #: 183747, (Item #: 154411) $37.00

Fender Bolt Kit 4 Per PKG - Bolt Kit, Rear Fender Bracket to Axle Housing, bolts 6 1/4 inch x 5/8 inch, nut and washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, and some early 2000 and 4000. (Item #: 183747, Ref: 355310-KIT) $27.00

Fender Skin - With raised Ford "Script" imprint. Fits Ford models 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 860. Replaces: NCB16312C. Add $20.00 per fender in addition to regular shipping charges. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179429, Ref: NCB16312C) $315.00

Fender With Bracket - Used on Ford 600 and 800 Series Tractors, 1955-1957. Not used on Row crop High Clearance Tractors. Images shows bracket side and outside. Price is for one fender. Used right or left side. (Item #: 182896, Ref: NCA16312C) $276.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 and 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104072, Ref: D5NN16312LRS) $190.00

Front Grill - This is an aftermarket metal replacement. It is close but not exactly like the original. The hand crank hole may come round or oblong shaped. For 4 cylinder Ford tractors 1953-1964. Replaces NCA8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104067, Ref: 713477) $149.98

Front Grille - Fiberglass - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 820, 840, 850, 860, 2000, 2031, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number NCA8200A, Made of Fiberglass, Comes primered (color may vary). Prior to painting check fitment, (Item #: 104066) $181.00

Grill Mounting Stud - For tractor models: 2000 4 cylinder, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 820, 840, 850, 860, 900, 950, 960, 2030, 2031. Replaces NAA88219B (Item #: 163727, Ref: FDS347) $8.00

No
Picture
Grill Stud - Grill stud for Ford 600, 800 Tractors (Item #: 185191, Ref: 311591) $8.00

Hood Emblem Housing - For tractor models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. Housing holds emblem and connects side pieces of hood. **WARNING** Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This is the same as NCA16613A but not nearly as finished. This part will likely require fill work. NCA16613A is a more finished product. (Item #: 126588, Ref: 311319) $130.00

Hood Emblem Housing - This is the same part as 311319 but of higher quality metal work. Less work will be required with this piece when doing a restoration. Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 184022, Ref: NCA16613A) $128.00

Hood Latch Assembly - This Hood Latch Assembly is used with Top Hood Door Latch (not included) part number NAA16628C. Two are used per hood. It is used on Ford Tractors NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. Replaces original part number NAA16645C. (Item #: 178160, Ref: NAA16645C) $49.80

Hood Latch Spring - For tractor models Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 with 4 cylinder gas engines). (Item #: 178099, Ref: NAA16925B) $12.90

Hood Screw Kit, 6 Piece - Ford Hood Screw Kit, 6 Piece. Used to secures rear of hood to dash board. 5/16 inch x 24 Phillips head w/ pilot. Used on Ford 1953 to 1964 4 cylinder tractors. (Item #: 125719, Ref: 354425S) $9.90

Running Board Bracket - Front - For tractor models 8N, NAA, 600, 601, 700, 800, 801, 900, 2000, 4000. All WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket right or left side. Price is for EACH bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 152392, Ref: 8N16470) $25.30

Side Panel, Left - Front Left Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C3NN16653B, NCA16653A. (Item #: 104058, Ref: C3NN16653B) $110.00

Side Panel - RH - Front Right Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces NCA16652A, C3NN16652B. (Item #: 104057, Ref: C3NN16652B) $92.00

Toolbox, Restoration Quality - Painted Red. For tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Restoration Quality Toolbox. Fits between Step Plate and Rear Axle Housing. Does not come with hardware. You will need 2 nuts 8MMx1.25 for the two studs on one end and a nut and bolt of your choosing for the other end. (Item #: 112630, Ref: NCA17005A) $64.00

Top Hood Door Latch - The new Top Hood Door Latch is used in Ford Tractors from 1953-1964. Models: NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1800, 1801. It is used with NAA16654C latch assembly. It replaces original part number NAA16628C. (Item #: 179284, Ref: NAA16628C) $12.50

Steering

Axle Pin, Flange, Locking - For tractor models with all purpose and LCG front axles 1953 Thru 1964. Fits 600, 601, 800, 801, 2000, 4000. All using part number NCA3127A axle pin. (Item #: 112058, Ref: NCA3128A) $18.80

Axle Pin Support Bushing - This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Item #: 110832, Ref: 2N3039) $7.70

Axle Pin, Threaded - 1.750 inch outside diameter, length is 4.5 inch. For tractor models with all purpose and LCG front axles 1953 thru 1964. Fits 600, 601, 800, 801, 2000, 4000. (Item #: 112057, Ref: NCA3127A) $21.40

Belt - Power steering pump belt. Approx. 17/32 inches X 47.77 inches. For early style pump on tractor models 600, 601, 700, 701, 800, 801, 900, 901. Recommend measuring old belt or around pulleys. (Item #: 173491, Ref: 310050) $10.20

Bolt, Radius Rod to Front Axle - Length is 5-1/2 inches, 5/8 inch-18 thread. Head outside diameter is 7/8 inches. Fits the following tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (up to 1964), 4000 (up to 1964). Two used per tractor. Sold individually. Replaces 957F3415A, 86531713, NAA3415BGV, NAA3415B. (Item #: 152353, Ref: NAA3415B) $8.60

Drag Link Assembly - For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000, 2031, 2130, 2131, 4000, 4031, 4120, 4121, 4131, 4131 (All 4 Cylinder Without Power Steering 1953-64), Replaces Ford OEM number 8N3287, 957E3287, C5NN3N295B, NAA3270A, NAA3290A, NAA3307B, NAA33271A, 87048406, NAA33315A, Length Adjustable 42-3/8" to 46-1/2" Center To Center Tie Rod Studs., (Item #: 125344) $125.00

Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Left Hand. (Item #: 182955, Ref: NAA3305) $114.00

Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Right Side. (Item #: 182956, Ref: NAA3304) $114.00

Drag Link Clamp - This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Item #: 184034, Ref: 8N3287) $6.10

Drag Link Clamp - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2120, 2130, 2131, 2300, 2310, 2600, 2610, 2910, 3000, 3100, 3110, 3120, 3300, 3310, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 530, 531, Replaces Ford OEM number 957E3287, 8N3287, (Item #: 104589) $5.40

Drag Link Dust Cover - Steering Drag Link Rear Ball Joint Cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5/8 inch hole, Large end is 1 7/16 inch inside diameter. (Item #: 178186, Ref: 9N3324) $13.20

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Item #: 178150, Ref: 9N3324OE) $16.80

Drag Link End, Front - 3.250 inches long, .750 inch diameter, 16 left hand thread. For tractor models (600, 800 up to serial number 78836 with power steering). (Item #: 104577, Ref: 309523) $33.60

Drag Link End, Front - A= 4.00 inches, B= .813 inches, 16 left hand thread. For tractor models 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 801, 851, 861, 2000, 4000. (Item #: 104578, Ref: 309591) $49.40

Drag Link End, Front - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A-N) $11.30

Drag Link End, Front - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Item #: 100671, Ref: NAA3270A) $11.30

Drag Link End, LH - A= 36.44 inches, B= 1.00 inch, .813 inch diameter, 16 UN RH thread. For tractor models (600, 800 serial number 78836 and up), (2000, 4000, all 4 cylinder serial number 78836 and up). Replaces 310083. (Item #: 104580, Ref: 312871) $170.00

Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Item #: 100670, Ref: NAA33271A) $12.70

Drag Link End, RH - A= 34.25 inches, B= 1.00 inch, .813 inch diameter, 16 UN right hand thread. For tractor models (2000, 4000 all 4 cylinders serial number 78836 and up), (600, 601, 800, 801 serial number 78836 and up). Replaces 310082. (Item #: 104579, Ref: 312870) $201.00

Drag Link Tube - 6.120 inches long. For tractor models 600 serial number 78836>, 800 serial number 78836>. (Item #: 104584, Ref: 312874) $76.00

Drag Link Tube - 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Item #: 104582, Ref: C5NN3349A) $31.00

Drag Link Tube - LH - Drag Link Tube is right hand. Tube measures 38.5 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch-18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178572, Ref: NAA33315A) $51.00

Drag Link Tube - RH - Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 178571, Ref: NAA3314B) $57.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Item #: 111126, Ref: AE33538A) $12.60

Front Axle Assembly with Bushing - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57/PS 55), 4000 (with Manual 7-57/PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. (Item #: 112019, Ref: D9NN3010EA) $190.00

King Pin Repair Kit - This kit will repair both spindles. Kit contains 2 of each of the following 2N3109 spindle bushing, NCA3110A spindle bushing, C0NN3123B thrust bearing, C5NN3125A spindle seal. For tractor models 600, 800, 601, 801, (700, 900, 701, 901, 2000, 4000 all rowcrop with wide front end except hi-clearance). Tractors 1955-1965 4-cylinder tractors. (Item #: 104570, Ref: S.65107) $31.00

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $10.90

Pin Front Axle - Pin, front axle unthreaded. Outside diameter 1.743 inches, inside diameter 1.310 inches, length 4 inches. For Jubilee, NAA, 500, 600, 700, 800, 6000. All 1954 through 1955 using unthreaded pin), (6000 with all purpose wide front axle 1/1963 to 12/1966). Replaces NAA3126B, 2N3126D, 86507106. (Item #: 112069, Ref: 2N3126D) $30.34

$Ford 800 Pitman Arm (LH\RH)$
Pitman Arm (LH/RH) - Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Item #: 116149, Ref: 86542743) $87.00

Power Steering Cylinder Seal Kit - For original equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. Replaces 87045114, CAPN3301B. Note, this kit may arrive with more parts than shown. These other parts are used on non-tractor applications and can be disregarded. (Item #: 155447, Ref: CAPN3301B) $21.90

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; 2000, 3000, 4000SU, 3400, 4110, 4400, 2600, 3600, 3900, 4100, 4600SU, 2610, 3610, 3910, 230A, 530A (1965-84). Also used on Ford 4 Cylinder 1955-1964. Replaces LA33586A (Item #: 170142, Ref: LA33586A) $52.00

Power Steering Hose - Single wire braid hose with fittings; 35 inches long. For 600, 800, NAA. (Item #: 179263, Ref: FPH34) $38.41

Power Steering Hose - Single Wire, Braid Hose Assembly with fittings, overall length 30 inches, 90 degree ends, 7/16 x 24 threads. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 600, 700, 800, 900. Replaces N10116, C0NN3C770A, C0NN3C769A, C0NN3A717B, C0NN3A714B, A45A1. (Item #: 178183, Ref: FPH30) $33.00

Power Steering Pump, Belt Driven - This Power Steering Pump is for models 600, 800, 601, 801, 2000, 4000, 701, 901. Gas and Diesel. Replaces C3NN3A691B. Includes mounting bracket, belt and replacement pressure hose. Verify part number if possible as there were more than one type during production runs. (Item #: 111004, Ref: S.60189) $802.48

Power Steering Pump Bracket - This Power Steering Pump Mounting Bracket is for pump part number S.60189 for the following models: 600, 601, 701, 800, 801, 901, 2000, 4000. (Item #: 179359, Ref: S.60157) $105.00

Power Steering Pump Pulley - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4140, Replaces Ford OEM number EBJ33556A, 231102, O.D. 3.750, Bore 0.671", Keyway 0.125", Belt Groove .500", (Item #: 126608) $61.00

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Item #: 115083, Ref: E0NN3N442BA) $17.40

Radius Rod Ball Spacer, Used - For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4030, 4100, 4110, 4120, 4121, 4130, 4131, 4410, 4600SU, 4610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 531, 532, 540, 541, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4140, Replaces Ford OEM number E0NN3N442BA, For a new version of this item use Item #: 115083, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459476) $10.92

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Item #: 108088, Ref: E0NN3N406BA) $10.80

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.10

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109) $4.00

No
Picture
Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Measures 1.352 inch inside diameter, 1.474 inch outside diameter and 1.490 inch length. Also replaces 81717392, 83928345 and 957E3110B. (Item #: 100632, Ref: NCA3110A) $4.40

Spindle Bushing Kit - Spindle Bushing Kit contains: 2 upper bushings part number 2N3109 and 2 lower bushings part number NCA3110A. For tractor models 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 900, Dexta, Super Dexta. (Item #: 182515, Ref: SBK5364) $26.20

Spindle - Left Hand, Used - For Ford tractor models 600, 700, 800, 900, 2000, 4000 (all 1955-64), Replaces Ford OEM number NCA3106B, F2NN3106BA, Left Side, Dimension A: 10.687", Dimension B: 1.250", Dimension C: 1.340", Dimension D: 1.250", Dimension E: .750", For a new version of this item use Item #: 100622, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400622) $33.01

Spindle, LH - Left Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (Wheel Bearing Kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100622, Ref: NCA3106B) $49.98

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle, RH - Right Hand Spindle. Verify measurements of Vertical Shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (wheel bearing kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Item #: 100621, Ref: NCA3105B) $44.98

Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Item #: 100623, Ref: C0NN3123B) $5.00

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Item #: 104731, Ref: 310799) $38.00

Steering Arm Dust Seal - For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Item #: 104572, Ref: 8N3528) $2.50

No
Picture
Steering Box Assembly (Manual), Remanufactured, C3NN3503E - For Ford tractor models 600, 800, 2000, 4000 (all 4 cylinder), Replaces Ford OEM number C3NN3503E, Manual Steering Box Double Arm Style, For a New version of this sku use Item #: 158461, (Item #: 204463) $1158.01

Steering Column Bearing Kit - Used on manual steering column. Kit contains column spring, seat and bearing. Replaces Ford OEM Numbers 8N3520, 8N3517, 8N3518, C5NN3N716A. (Item #: 118504) $40.00

Steering Column Bearing Spring - This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Item #: 178087, Ref: 8N3520) $3.80

Steering Column Grommet - Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Item #: 118307, Ref: NCA3578A) $10.60

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Item #: 124493, Ref: 8N3570) $2.90

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Item #: 179603, Ref: 8N3595KIT) $23.70

Steering Column Spring Seat - For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Item #: 179692, Ref: 8N3518) $4.50

Steering Gear Assembly - Manual Steering Gear Assembly without arms. Fits 600, 601, 800, 801, (2000 and 4000 1955-1964). Does not fit row crops, high crops or offsets. Replace 311318, 8N3548B, NCA3575A (Item #: 185461, Ref: 8N3548B) $804.00

Steering Gear Assembly - For Ford tractor models 600, 601, 620, 630, 640, 650, 660, 800, 801, 820, 840, 850, 860, 2000, 4000, Replaces Ford OEM number C3NN3503E, Steering gear assembly with 2 drop down arms, For a Remanufactured version of this sku use Item #: 204463, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158461) $879.30

Steering Gear Pitman Arm, Used - For Ford tractor models NAA, 8N, 600, 700, 800, 900, 901, 2000, 4000 (all 1949 - 1964), Replaces Ford OEM number 86542743, NCA3590A, Left Hand or Right Hand, For a new version of this item use Item #: 116149, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416149) $50.40

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Item #: 178090, Ref: S.67109) $23.20

Steering Sector, Left Hand - Double Steering Sector [7 Teeth and 1 Double Tooth). Replaces OEM numbers 251294, C3NN3527A. For 4-Cylinder Fords Only [1950 to 1964]. (Item #: 111898, Ref: 251294) $207.14

Steering Sector, Left Hand - Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Item #: 114749, Ref: 251293) $219.00

Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125 inch I.D., 1.442 inch O.D. and 0.200 inch wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Item #: 124153, Ref: 8N3591B) $5.10

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Steering Shaft and Nut Assembly, Manual - Fits 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with Lower Bearing. (Item #: 114544, Ref: NCA3575A) $104.00

Steering Shaft Bearing - For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (1964-earlier), 2031, 2111, 2120, 2130, 2131, 4000 (1964-earlier), 4031, 4120, 4121, 4130, 4140, Replaces Ford OEM number 8N3571, Bearing Only, For Complete Bearing - Cup And Cone use Item #: 111857, (Item #: 179748) $13.50

Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 111857, Ref: 8N3571-OE) $12.50

Steering Shaft Bearing and Cup Assembly - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for one set. Two required for the listed models. Replaces 8N3571 and 8N3552. (Item #: 111857, Ref: 8N3505) $12.50

Steering Shaft Bearing And Cup Assembly - Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft/top and bottom. (Item #: 178073, Ref: 8N3571-52) $22.20

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Item #: 124501, Ref: 8N3517) $22.80

Steering Shaft Bearing Cup - This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Item #: 173338, Ref: 8N3552) $13.10

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Item #: 124154, Ref: 8N33581) $3.40

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $46.00

Steering Shaft Upper Bearing and Race - Use (1) 8N3571-OE and (1) 8N3552 This upper steering shaft bearing and race are for models Super Major, 2600, 2610, 3000 (1/65-8/68), 3600, 3610, 3910, 4100, 4110. Replaces C5NN3552A, C5NN3N615A, 8N3571, 8N3552 (Item #: 111857, Ref: C5NN3552A) $12.50

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Item #: 101425, Ref: D6NN3600B) $33.00

Steering Wheel - Steering Wheel OEM Style, 17-1/2 inch diameter, 11/16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Item #: 101421, Ref: 8N3600-OE) $26.00

Steering Wheel Dome Nut Washer - With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. Replaces 356515S, 356515S36 (Item #: 126719, Ref: 356515S) $3.90

Steering Wheel Nut - Black - For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 359295S7, Black Finish, 11/16" - 20 Threads, (Item #: 111727, Ref: 351114CCBLACK) $6.60

Steering Wheel Nut, Chrome - Nut, Steering Wheel ACORN style. 11/16 inch-20. CHROME PLATED. For Ford 4 Cylinder Tractor Models, 1947-1964. (Item #: 101422, Ref: 351114CC) $7.00

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn Style Nut, 11/16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Item #: 176956, Ref: 351114S) $7.00

Wheels

No
Picture
11" x 28" Spin Out Rear Rim, Off-White - For Ford tractor models NAA, 541, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number NDB1020B, Width: 11", Diameter: 28", Type: Spin Out, Rim Color: Off-White, (Item #: 158482) $850.00

12" x 28" 6 Loop Rear Rim, Used - For Ford tractor models NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4600, 4610, 4630, 4830, 5030, 5600, 5700, 6600, 6700, 7600, 7700, Compatible with Ford Construction and industrial models 233, 234, 334, 335, 340, 420, 445, 515, 530, 531, 532, 535, 540, 541, 545, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 4040, 4140, Replaces Rims, Wheels, Tires OEM number C7NN1050N, 31319712G, 99A502, D4NN1050B, D9NN1050EA, RW12286, TR1228, Rim Width: 12", Rim Diameter: 28", Type: 6 Loop, 12X28, May Fit More Applications Than Listed, For a new version of this item use Item #: 103720, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403720) $99.01

No
Picture
4" X 19" Front Rim, 6 Bolt - For Ford tractor models NAA, 2N, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 681, 700, 740, 771, 800, 821, 851, 861, 871, 901, 950, 960, 981, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4110, 4120, 4131, Replaces Ford OEM number C5NN1015A, Width: 4", Diameter: 19", Bolts: 6, Bolt Hole Diameter: 6", Pilot Hole: 4.625", (Item #: 174109) $82.00

Bearing Cup, JD7418 - For Ford tractor models 600, 700, 800, 900, Replaces John Deere OEM number JD7418, Replaces OEM number 017201X, 055276, 10468, 130503H, 13958, 1767014, 25520TIM, 42109, 432BH, 70030, 70210009, 71120, 712182, 86900365, 990085, A29062, NCB44136A, PT206, ST987, VT2100, WBB5018B, 822013C, (Item #: 114604) $6.60

Bolt. Front Wheel - This bolt is the Hub to Rim Bolt. Measures 1 5/8 inches x 20 UNF threads, .6 inch shoulder diameter, 1.346 inch usable length, 1.545 inch overall length. For 2000, 2N, 3000, 4000, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Replaces 81816078, C5NN1107B, C5NN1107D, C5NN1107E, 78-1107 and 781107. Uses nut part number C5NN1012B. (Item #: 154744, Ref: C5NN1107E) $3.70

Front Hub Kit - Used on many Ford models, 1955 and later, this Front Hub Kit contains 1 of 957E1139 dust cap, 1 of EHPN1200C wheel bearing kit, 6 of C5NN1012B wheel nuts, 6 of C5NN1107F wheel studs, and 1 of C9NN1104E hub. Verify part numbers. Many of the models listed used more than one front hup configuration. Ford 2000, 2100, 2120, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3055, 3230, 334, 335, 3600, 3610, 3610V, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4410SU, 4600, 4600NO, 4600O, 4600SU, 4610, 4610N, 4610NO, 4610O, 4610SU, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 5030, 600, 601, 800, 801 (Item #: 113373, Ref: C9NN1104EKIT) $83.00

Front Wheel Bearing Kit - Kit Contains one each: LM67048 inner cone 1.250 in id, LM67010 outer cup 2.328 in od, LM11949 outer cone .750 in id, LM11910 outer cup 1.781 in od, NCA1190A seal 1.875 in id and 2.695 in od. For tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1955-1964 with serial number 137817 and up. Repairs one wheel. For hubs C9NN1104F, NCA1104B, NCA1106B. Verify part numbers or sizes as these models had more than 1 different front end. (Item #: 100653, Ref: CBPN1200C) $16.00

Front Wheel Bearing Kit - This front wheel bearing kit contains inner bearing 8A1201B 1.25 in id, inner race 8A1202A 2.441 in od, outer bearing 8A1216A .75 in id, outer race 8A12127A 1.938 in od and seal 19263 1.875 in id and 2.692 in od. For models 600, 800, 700, 900 series. Verify part numbers or sizes as these models had more than 1 different front end. (Item #: 100652, Ref: CBPN1200B) $24.70

Front Wheel Cap - For 8N, 9N, 2N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 all 1939 to 1964. Front Wheel Cap. (Item #: 183735, Ref: 2N1139B) $6.10

Front Wheel Hub - For Ford tractor models 600, 800, 2100, 2310, 2610, 2810, 2910, 3055, 3230, 3610, 3910, 4000, 4100, 4130, 4410, 4600, 4610, Replaces Ford OEM number C9NN1104E, 6 Bolt, Uses threaded dust cap, For hub cap use Item #: 100661, (Item #: 100660) $52.00

Front Wheel Hub, Used - For Ford tractor models NAA, 8N, 501 (s/n 137818-earlier), 541 (s/n 137818-earlier), 600 (s/n 137818-earlier), 601 (s/n 137818-earlier), 611 (s/n 137818-earlier), 620 (s/n 137818-earlier), 621 (s/n 137818-earlier), 630 (s/n 137818-earlier), 631 (s/n 137818-earlier), 640 (s/n 137818-earlier), 641 (s/n 137818-earlier), 650 (s/n 137818-earlier), 651 (s/n 137818-earlier), 660 (s/n 137818-earlier), 661 (s/n 137818-earlier), 671 (s/n 137818-earlier), 681 (s/n 137818-earlier), 700 (s/n 137818-earlier), 701 (s/n 137818-earlier), 740 (s/n 137818-earlier), 741 (s/n 137818-earlier), 771 (s/n 137818-earlier), 800 (s/n 137818-earlier), 801 (s/n 137818-earlier), 811 (s/n 137818-earlier), 820 (s/n 137818-earlier), 821 (s/n 137818-earlier), 840 (s/n 137818-earlier), 841 (s/n 137818-earlier), 850 (s/n 137818-earlier), 851 (s/n 137818-earlier), 860 (s/n 137818-earlier), 861 (s/n 137818-earlier), 871 (s/n 137818-earlier), 881 (s/n 137818-earlier), 900 (s/n 137818-earlier), 901 (s/n 137818-earlier), 941 (s/n 137818-earlier), 950 (s/n 137818-earlier), 951 (s/n 137818-earlier), 960 (s/n 137818-earlier), 961 (s/n 137818-earlier), 971 (s/n 137818-earlier), 981 (s/n 137818-earlier), 2000 (s/n 137818-earlier), 2031 (s/n 137818-earlier), 2110 (s/n 137818-earlier), 2111 (s/n 137818-earlier), 2120 (s/n 137818-earlier), 2131 (s/n 137818-earlier), 4000 (s/n 137818-earlier), 4031 (s/n 137818-earlier), 4110 (s/n 137818-earlier), 4120 (s/n 137818-earlier), 4131 (s/n 137818-earlier), Replaces Ford OEM number 86511582, 8N1104, D5NN1104A, Use 111238 if smaller inner race is needed, For a new version of this item use Item #: 104754, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404754) $22.51

Front Wheel Hub without Studs - For Ford tractor models NAA, 8N, 501 (s/n 137818-earlier), 541 (s/n 137818-earlier), 600 (s/n 137818-earlier), 601 (s/n 137818-earlier), 611 (s/n 137818-earlier), 620 (s/n 137818-earlier), 621 (s/n 137818-earlier), 630 (s/n 137818-earlier), 631 (s/n 137818-earlier), 640 (s/n 137818-earlier), 641 (s/n 137818-earlier), 650 (s/n 137818-earlier), 651 (s/n 137818-earlier), 660 (s/n 137818-earlier), 661 (s/n 137818-earlier), 671 (s/n 137818-earlier), 681 (s/n 137818-earlier), 700 (s/n 137818-earlier), 701 (s/n 137818-earlier), 740 (s/n 137818-earlier), 741 (s/n 137818-earlier), 771 (s/n 137818-earlier), 800 (s/n 137818-earlier), 801 (s/n 137818-earlier), 811 (s/n 137818-earlier), 820 (s/n 137818-earlier), 821 (s/n 137818-earlier), 840 (s/n 137818-earlier), 841 (s/n 137818-earlier), 850 (s/n 137818-earlier), 851 (s/n 137818-earlier), 860 (s/n 137818-earlier), 861 (s/n 137818-earlier), 871 (s/n 137818-earlier), 881 (s/n 137818-earlier), 900 (s/n 137818-earlier), 901 (s/n 137818-earlier), 941 (s/n 137818-earlier), 950 (s/n 137818-earlier), 951 (s/n 137818-earlier), 960 (s/n 137818-earlier), 961 (s/n 137818-earlier), 971 (s/n 137818-earlier), 981 (s/n 137818-earlier), 2000 (s/n 137818-earlier), 2031 (s/n 137818-earlier), 2110 (s/n 137818-earlier), 2111 (s/n 137818-earlier), 2120 (s/n 137818-earlier), 2131 (s/n 137818-earlier), 4000 (s/n 137818-earlier), 4031 (s/n 137818-earlier), 4110 (s/n 137818-earlier), 4120 (s/n 137818-earlier), 4131 (s/n 137818-earlier), Replaces Ford OEM number 86511582, 8N1104, D5NN1104A, NCA1104C, Use 111238 if smaller inner race is needed, (Item #: 104754) $38.50

Front Wheel Nut - These Front Wheel Nuts are 1/2 inch-20. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000. Replaces C5NN1012B, E1ADKN1012. (Item #: 108607, Ref: C5NN1012B) $0.70

Front Wheel Rim - 4.50 inch x 16 inch, 6 bolt hub, 6.0 inch bolt circle, 4.625 inch pilot hole, fits 5.50 inch or 6.00 inch x 16 inch tire. For tractor models Dexta, NAA, Super Dexta, 8N, 600, 700, 800, 900, 2000, 3000, 4000. 957E1015D. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $60.00

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Front Wheel Stud Bolt - Front Wheel Stud Bolt measures 1/2 inch X 2 inch. WITHOUT nuts. Note: nuts are available by ordering part number C5NN1012B. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 108606, Ref: C5NN1107F) $1.55

Hub, Front Wheel - Tractors: 601, 701, 801, 901, for 6 hole 4.50 inch X 16 inch wheel (1957 to 1964); for 6 hole 4.00 inch X 16 inch wheel. Tractors 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000 (1965 to 1975), 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3550, 3600, 3900, 3910, 4000, 4100, 4110, 4140, (1975 to 1981), 2610 (1981 and up), 231, 233, 333, 531, 3610, 4600, 4610 (with 2.32 inches Inner Bearing Bore). Uses bearing and seal kit FW93WS; wheel bolt C5NN1107F and nut C5NN1012B. Replaces 95731110, C5NN1104B. (Item #: 100659, Ref: C9NN1104F) $69.00

Lug Nut, Rear Wheel - 5/8-18 (UNF) Thread. Uses a 1 1/16 inch wrench. Replaces C5NN1120F, 8N1134, 881162M2. (Item #: 109991, Ref: 8N1134) $1.90

Rear Rim - This rim is 9 inch x 28 inch wide base demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Fits tire size 11.2 inch x 28 inch. (Item #: 103780, Ref: NCA1020C) $126.00

Rear Rim - This rear rim is six loop, 10 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 900, 2000, 4000, Dexta, Super Dexta and others by size. Replaces NCA1020B. (Item #: 103719, Ref: NCA1020B) $143.00

Rear Rim - This Six loop rim is 11 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900. (Item #: 104209, Ref: C5NN1050E) $164.00

Rear Rim - This Six loop rim is 12 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900, 2000, 3000, 4000. Replaces D4NN1050B, D9NN1050EA, 31319712G, 99A502 (Item #: 103720, Ref: R2068) $150.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $23.50

Rear Wheel Center - This disc is used on multiple Ford models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces Ford OEM numbers D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B. Additional $35 shipping due to weight. (Item #: 149804, Ref: D9NN1036CA) $225.00

Rear Wheel Flange Nut - For Ford tractor models 501, 600, 700, 800, 900, 2000, 3000, 4000 (all '48 - '64), Replaces Ford OEM number 8N1132A2, Sold each, 1-1/16" Hex, 2.65" Overall length, 5/8" UNF Thread, (Item #: 116012) $15.00

Seal, Front Wheel Hub - Front Wheel Hub Dust Seal. 2 11/16 inch outside diameter, 2 inches inside diameter. Fits: 2000 1955-1964 USA BUILT, 2N 1939-1947, 4000 1955-1964 USA BUILT, 600 1955-1964 USA BUILT, 700 1955-1964 USA BUILT, 800 1955-1964 USA BUILT, 8N 1948-1952, 900 1955-1964 USA BUILT, 9N, NAA 1953-1954. Price shown is for each. Can replace 9N1190B. (Item #: 113706, Ref: NCA1190A) $3.50

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.516 inch outside diameter, 0.78 inch inside diameter, 0.089 inch thick. It replaces original part numbers C5NN1N195A, 81811561, 9N1195. (Item #: 164443, Ref: C5NN1N195A) $1.50

Wheel Bearing Kit - For Ford tractor models 600 (1955-64), 700 (1955-64), 800 (1955-64), 900 (1955-64), 2000 (1955-64), 4000 (1955-64), Replaces manufacturer number WBK-JD-2, Kit Includes: (1) Inner Cone (Inside Diameter: 1.25", Width: 0.5937"), (1) Inner Cup (Outside Diameter: 2.328", Width: 0.465"), (1) Outer Cone (Inside Diameter: 0.75", Width: 0.655"), (1) Outer Cup (Outside Diameter: 1.781", Width: 0.475"), (1) Seal, (Item #: 165731) $29.70

Wheel Nut and and Stud Pack (6) - For Ford tractor models Dexta, NAA, Super Dexta, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2300, 2600, 2610, 2810, 2910, 3000, 3055, 3230, 3300, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 4630, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, Replaces OEM number C5NN1107F, 81816580, C5NN1012B, 81815739, Sold in Packs of 6, (Item #: 177012) $27.90

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces D9NN1036CA, D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B, C0NN1050F, NCA1020B, 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $635.00

Wheel Stud, Rear - 5/8 inch-18 thread, .690 inch outside diameter on serration, length (without head) is 1- 15/16 inches. For tractor models: 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, (4000 1958-1964). (Item #: 111218, Ref: 312696) $3.70

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.40

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $7.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 800 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford 800 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 800 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Ford 800 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford 800 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford 800 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $6.98

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 9N5182) $44.30

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.50

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $19.98

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $119.41

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.90

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $31.40

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $760.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $585.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $71.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $29.70

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $273.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.60

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $56.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.20

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $51.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $51.00

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $36.10

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $123.80

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $106.00