FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford TW20 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Master Cylinder Repair Kit - This Brake Master Cylinder Repair Kit contains (2) 1-1/8 inch diameter pistons, (2) C7NN2173A cups, (2) C7NN2004A spring and retainers, (2) 277688 snap rings, (2) C7NN2180A boots. Replaces OEM part number C7NN2004A. Fits 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW5. (Item #: 156042, Ref: C7NN2004A) $44.50

Dual Brake Master Cylinder - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number C7NN2140A, D3NN2140A, Fits cylinders with external line. Customer removes plug, and reuses fitting, Can be used to replace cylinder with reservoir. Customer must reuse original reservoir, (Item #: 164799) $474.00

Internal Spline Brake Disc, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8100, 8200, 8400, 8530, 8630, 8670, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Replaces Ford OEM number 86014787, D5NN2A097A, 9823447, Teeth: 17, 368mm OD, For a new version of this item use Item #: 159703, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497932) $80.01

Clutch

No
Picture
Clutch Alignment Tool, 1.40" Pilot Diameter, 10 Spline - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5200, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number 8301153, Pilot Diameter: 1.40", 1st Spline: 1-3/4", 10 Spline, (Item #: 176770) $26.30

Clutch Bearing - Pilot - Pilot Ball Bearing, for PTO Drive Plate. Inside diameter 1.4370 inch, outside diameter 2.6772 inch, width 0.5906 inch. Replaces 83992560, F0NNN779AA (Item #: 108005, Ref: F0NNN779AA) $15.20

Clutch Disc - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number D8NN7550BB, E5NN7550CA, Clutch Diameter: 14", Clutch Hub Diameter: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Large Pad, For Single Clutch Tractors, (Item #: 116850) $290.00

Clutch Disc, Remanufactured, D8NN7550BB - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number D8NN7550BB, 86640484, Clutch Size: 14", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 8 Reg Pads, (Item #: 203630) $192.00

Clutch Disc, Remanufactured, D8NN7550BB - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number D8NN7550BB, Clutch Size: 14", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 8 Lg Pads, (Item #: 206194) $276.00

No
Picture
Clutch Kit - The Clutch Kit contains a 14 Inch Pressure Plate part number E5NN7563AA, a 14 Inch Transmission Disc number E5NN7550CA-8, a Release Bearing number N1585 and a Pilot Bearing Number 6108. The Pressure Plate is 3 Lever with a 2.048 Inch Flywheel Step. The Disc is an 8 Button Type, 10 Spline and is Spring Loaded. For Models TW15, TW20, TW25, TW30, 8630, 8730, 8830. (Item #: 173367, Ref: CLK101) $849.00

No
Picture
Clutch Kit - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number E5NN7563AA, D8NN7563AA, D8NN7550BB, D8NN7580AA, E4NN7580AA, C5NNN779B, F0NNN779AA, Replaces manufacturer number 165582-2, Includes: pressure plate, 6 pad transmission disc, release bearing and pilot bearing, Pressure Plate: 14", 3 lever with 15 coil springs, Pressure Plate Casting: Counter bored 8.125" to accept tuff torque disc dampener, Recessed Flywheel: 2.042", Transmission Disc: 14" x 1-3/4", 10 splines, dampened 6 pad, Mating cover assembly must have 8.125" counter bore in pressure plate casting to avoid dampener interference, Release Bearing I.D.: 2.505", Pilot Bearing: 2-43/64" O.D., 1-27/64" I.D., 19/32" thick, For Clutch Alignment Tool use Item #: 108005, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166010) $680.00

Clutch Pack Housing - This Clutch Pack Housing comes without clutches. It replaces original part numbers 83931457, D0NN7R036A, D0NN7R036B, D2NN7R036A, D2NN7R036B, D3NN7R036A, D5NN7R036A, D5NN7R036B, D6NN7R036A, D8NN7R036AA, E0NN7R036AA, E0NN7R036AB. (Item #: 179282, Ref: E0NN7R036AB-B) $418.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A) $4.60

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Item #: 166322, Ref: C5NN7A615A) $5.70

Pressure Plate Assembly, Remanufactured, D8NN7563CA - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number D8NN7563CA, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 116852, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203640) $326.01

Release Bearing - Clutch Release Bearing. For tractor models 4000, 8630, 8730, 8830, TW15, TW20, TW25, TW30, TW35. (Item #: 107274, Ref: D8NN7580CA) $24.80

Cooling System

Fan Blade - 6 - For Ford tractor models TW10 (with AC), TW20 (with AC), TW30 (with AC), 9700 (8/1976-1978), Replaces Ford OEM number D5NN8600G, 22' Diameter, 0.625" Pilot Hole, 2.500" Ctr on Mounting Holes, (Item #: 163839) $197.00

Fan Pulley - This Fan Pulley is used on Ford / New Holland models 8400, TW10, TW20, TW30, 8000, 8200, 8700, 9000, 9600, 9700. Replaces D2NN8610B, 83913833 (Item #: 168130, Ref: D2NN8610B) $191.00

Radiator - Our new radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This radiator has 10 fins per inch and 5 rows of tubes. It is 24.875 inch tall and the core size is 21.875 inch wide. This radiator fits multiple Ford / New Holland Tractor models. (NOTE: replaces E3NN8005BD15M, E3NN8005CE15M, E3NN8005DE15M). Can be used with or without oil cooler. (Item #: 101702, Ref: 82847503) $780.00

Radiator - For tractor models 8630, TW15 (1983 and Later), TW20 with Air Conditioning. (Item #: 101702, Ref: R2761) $780.00

No
Picture
Radiator Drain Faucet - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2031, 2100, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4600, 4610, 4630, 5000, 5110, 5600, 5610, 5640, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7410, 7610, 7700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030 Replaces Ford OEM number 81465471, C9NN8115A, C5NN8115B, , Compatible with New Holland Harvester (s) 1880, 1890, 1895, 1900, 1915, 2100, Compatible with New Holland Baler (s) 1283, 1425, 1426, Compatible with New Holland Hay Cutting (s) 1100, 1112, 1114, 1116, 1118, 1469, 1495, 1496, 1499, Replaces New Holland OEM number 81465471, Fits all models with 1/4" NPT threads, (Item #: 176414) $4.80

Radiator Hose, Lower - With Clamps - For tractor models TW10, TW20, TW30. (Item #: 159655, Ref: D8NN8B274AB) $11.80

Radiator Hose Upper - Hose, radiator upper. For TW10, TW20, TW30 (Item #: 159652, Ref: D8NN8260BB) $23.80

Radiator, Premium Used - For Ford tractor models TW15, TW20, 8630, Replaces Ford OEM nos E3NN8005BC, E3NN8005BD15M, Our premium used radiators have been cleaned, inspected, and pressure checked, (Item #: 300317) $580.01

Thermostat - Thermostat, 203 degree with gasket. For tractor models 4830, 5640, 6640, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8670, 8730, 8770, 8830, 8870, 8970, G170, G190, G210, G240, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Item #: 184759, Ref: D8NN8575FBWG) $37.70

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Item #: 117437, Ref: E5NN8507AB) $1.00

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford/New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Item #: 117438, Ref: E6NN8513AA) $3.20

Water Pump, Remanufactured, FAPN8A513LL - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A64, A66, Replaces Ford OEM number FAPN8A513LL, 1863921, 3956957, 81863921, 81872282, 83926007, 83956957, E6NN8501AC, EAPN8A513G, EAPN8A513SG, EGPN8A513BA, Single Groove Pulley, Pulley Height: 1-1/2", For a New version of this sku use Item #: 100562, (Item #: 210297) $124.01

Water Pump, with Single Pulley. - Includes Gasket. Fits 7810, 7910, 8210, 8700, 9700, 8530, 8630, 8730, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces EAPN8A513G. (Item #: 100562, Ref: EGPN8A513BA) $84.00

Decals and Emblems

No
Picture
Decal Set - Hood only set for TW20. Blue and White. (Item #: 183732, Ref: R4145) $87.00

Drive Train

Drive Plate Bearing - Measuring 2.68 inches outside diameter, 1.43 inches inside diameter, 0.59 wide. It is listed here as a Transmission Drive Plate bearing but has other applications. Replaces OEM numbers 47508382, 81811675, 81816675, C5NNN779A, C5NN779B, 83992560, F0NN779AA, C5NNN779B, F0NNN779AA. Used on Ford 4400, 4500, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8030, 8100, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TS100, TS110, TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 108005, Ref: C5NNN779B) $15.20

Input Shaft - This Input Shaft is 15.28 inches long. 8000, 9000, 8600, 9600, 8700, 9700, TW10, TW20, TW30, TW5, TW15, TW25, TW35 (9/1969-1990). (Item #: 178923, Ref: D8NN7017AA) $284.25

PTO Drive Shaft - 37.5" Long - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700 (all 1968-8/69), Replaces Ford OEM number C7NN7A684D, 37.50" Long, 20 Spline, For PTO Drive Hub use Item #: 104264, (Item #: 110534) $388.00

Shift Fork 1st and 2nd, Used - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM nos D5NN7C114A, D1NN7C114A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442027) $278.01

No
Picture
Shift Fork 3rd and Reverse, Used - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces New Holland OEM nos D5NN7N354A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442043) $278.01

No
Picture
Shift Fork 4th Gear, Used - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces New Holland OEM nos D5NN7N438A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442041) $278.01

Transmission Housing, Used - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM nos D8NN7N477CA, Replaces Casting nos D8NN7N477DA, All with year 1/1969 to 12/1978, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496767) $590.01

Electrical System

Alternator - 12 volt, 51 amp. Will replace 31 and 37 amp alternators. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 and 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K, D5NN10300D (Item #: 111069, Ref: D5NN10300E) $160.00

Alternator - Motorola Style (7374), Remanufactured, D7NN10300B - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8600, 8700, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 335, 340, 340A, 340B, 445, 445A, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 655A, 755, 755A, Replaces Ford OEM number D7NN10300B, Replaces manufacturer number 210-156, 67374, 8MA2010P, 8MA2014P, 7374, LRA01058, 90-05-9113, ALT32028, Motorola Style, Voltage: 12, Rotation: Clockwise, Amperage: 72, Regulator: External, (Item #: 203172) $279.00

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Ford New Holland 8400, 8530, 8600, 8630, 8700, 9200, 9600, 9700, 9710, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 230A, 2310, 233, 234, 2600, 2610, 2910, 335, 3600, 3610, 3910, 4610, 530A, 5600, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8730, 8830, 9000. Replaces D2NN19N581B, D5NN18527AA, D5NN18527AA, V103596, V18380, V35513. (Item #: 108656, Ref: 72162089) $74.00

Blower Wheel - Blower wheel, counterclockwise - 4-1/4 inch diameter wheel, 3/8 inch shaft. Offset - 2 1/4 inches and 3 1/2 inches. Used on Ford models: 6610, 6810, 7410, 7610, 7700, 7710, 7810, 7910, 8700, 9700, TW10, TW20, TW30, 550, 555, 555A, 555B Replaces D5NN18459A. (Item #: 163264, Ref: 539018R2) $49.30

Hold-down, Battery Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600 (& N, R, V), 3000 (Series), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4500, 4600, 4600SU, 5000 (Series), 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000 (Series), 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 250C, 260C, 333, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 455, 455C, 455D, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, Replaces Ford OEM number D6NN10716C, 83925344, For 128Ah 4DLT Diesel Battery, (Item #: 176620) $98.00

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $9.30

Oil Pressure Sending Unit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2600, 2610, 3000, 3230, 3310, 3400, 3500, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4830, 5000, 5600, 5640, 5700, 6000, 6600, 6610, 6640, 6700, 7000, 7600, 7610, 7700, 7740, 7810, 7840, 7910, 8000, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340A, 340B, 345C, 345D, 445, 445A, 445D, 455D, 515, 531, 532, 535, 540, 540A, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 655, 655A, 655C, 655D, 675D, 675E, 775, 3500, 4500 Replaces Ford OEM number D8NN9278BB, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278F, F0NN9278AA, F1NN9278AA, C8NF9278B, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TS90, TS100, TS110, Replaces New Holland OEM number 82028130, 81873524, (Item #: 121174) $7.20

Starter, Diesel Engines - With single contact solenoid, 12 volt, 10 tooth, CW rotation. For tractor models TW10, TW20, TW25, TW30, TW35 1979-1983 with 6-401, 2000, 3000 1965-1975, 2310 1982-1985, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 with 3-158, 2910 1983-89 with 3-175, 3000 1965-68 with 3-175, 3230 1990-95 with 3-192, 3430 1990-98 with 3-192, 3610 1982-83 with 3-192, 3910 1983-90 with 3-192, 3930 1990-96 with 3-201, 4000 1965-72 with 3-192 or 3-201, 4100 1978-81 with 3-183, 4110 1977-83 with 3-201, 4630 1989-96 with 3-201, 1990-99 with 3-192 diesel, 5000 1965-76 with 4-256, 5030 1992-96 with 4-256, 5600 1975-81 with 4-256, 5610 1981992 with 4-256, 5900 1985-93 with 4-256, 6600 1975-81 with 4-256 diesel, 6610 1982-92 with 4-268, 6700 1975-81 with 4-256, 6710 1982-85 with 4-256, 7000, 7100, 7200 1971-75 with 4-256), 7400 1975-76 with 4-256, 7600, 7700 1975-81 with 4-256, 7710 1982-91 with 4-268, 7810 1978-91 with 6-401, 8000 1968-87 with 6-401, 8210 1978-91 with 6-401. Replaces 26395, 26211, 26339A, SLU003. (Item #: 100300, Ref: SLU0002) $157.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $165.00

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8530, 8630, 8700, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Item #: 119934, Ref: E4NN11350AA) $29.20

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Item #: 115052, Ref: C7NN7A247A) $14.30

Engine Bearings

LuK® Permium Clutch Pilot Bearing - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6500, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number F0NNN779AA, 83992560, C5NNN779B, For Standard Duty use Item #: 108005, (Item #: 169092) $28.80

Main Bearings - .020" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790359, 87790492, Sold in complete set, Bearing Size: .020" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106430, (Item #: 106429) $84.00

Main Bearings - .030" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790360, 87790493, Sold in complete set, Bearing Size: .030" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106429, (Item #: 106430) $72.00

Main Bearings - .040" Oversize - Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2120 (1/65-12/74), 2300 (1/65-12/74), 2310 (1/65-12/74), 2310 (3/82-12/83), 2600 (1/75-12/81), 2600 (N, R, 1/75-12/81), 2600 (V, 10/75-9/96), 2610 (1/81-4/83), 2610 (V, 1/81-2/90), 2810 (1/84-2/90), 2910 (5/83-2/90), 3000 (1/65-12/74), 3055 (1/65-12/74), 3100 (1/65-12/74), 3120 (1/65-12/74), 3190 (1/65-12/74), 3230 (3/90-9/93), 3300 (1/65-12/74), 3310 (1/65-12/74), 3330 (1/65-12/74), 3400 (1/65-9/75), 3430 (3/90-1/98), 3500 (1/65-12/74), 3550 (1/65-12/74), 3600 (1/75-12/81), 3600 (N, NO, V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610 (V, 1/81-4/83), 3610 (8/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (5/83-2/90), 3910 (H, N, 1/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 3930 (3/90-7/99), 3930 (H, 3/90-8/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4110 (1/81-2/90), 4110 (V, 1/81-2/90), 4110 (NO, O, 1/81-2/90), 4110 (N, 12/81-2/90), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4140 (1/65-12/74), 4190 (1/65-12/74), 4200 (1/65-12/74), 4330 (1/65-12/74), 4340 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 4500 (1/65-12/74), 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-7/81), 4610 (1/81-2/90), 4610 (V, 1/81-2/90), 4610 (NO, O, 1/81-2/90), 4610 (N, 1/81-2/90), 4610SU (8/81-2/90), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-later), 4830 (7/90-5/94), 4830 (N, O, 7/90-5/94), 5000 (1/65-1/75), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), 5100 (1/65-12/74), 5110 (5/84-10/91), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (Mexico, 5/85-12/93), 6410 (UK, 1/81-12/91), 6500 (3/73-10/75), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 6810 (4/89-10/91), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7410 (4/89-10/91), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7610 (1/81-10/91), 7610 (O, 10/81-12/91), 7700 (1/75-12/80), 7710 (1/81-10/91), 7810 (2/88-10/91), 7810 (O, 2/88-10/91), 7910 (1/82-10/91), 8000 (1/68-12/98), 8200 (1/68-12/98), 8210 (1/82-10/91), 8400 (1/71-9/72), 8530 (3/90-12/93), 8600 (10/72-7/76), 8630 (3/90-12/93), 8700 (8/76-12/78), 8730 (3/90-12/93), 8830 (3/90-12/93), 9000 (1/69-12/78), 9200 (1/69-9/72), 9600 (10/72-7/76), 9700 (8/76-12/78), Compatible with Ford Construction and industrial models A62 (1/74-12/83), A62 (5, Europe, 1/74-12/84), A64 (1/74-12/83), A66 (1/74-12/83), 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 250C (9/89-12/94), 260C (9/89-12/94), 333 (1/75-12/81), 334 (1/81-4/83), 335 (Highway, 1/83-2/84), 335 (10/75-9/78), 340 (3/79-9/81), 340A (10/81-5/85), 340B (6/85-11/88), 345C (12/88-8/92), 345D (9/92-10/00), 420 (10/75-9/78), 445 (1/78-5/85), 445A (6/85-11/88), 445C (12/88-8/92), 445D, 450 (1/87-11/88), 455 (7/87-11/88), 455C (12/88-8/93), 455D (9/92-9/96), 515 (10/75-9/78), 530A (1/81-4/83), 531 (1/75-12/81), 532 (10/75-9/78), 535 (10/75-9/78), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (1/84-11/88), 545C (12/88-8/92), 545D (9/92-12/00), 550 (1/75-9/78), 555 (10/78-10/88), 555A (1/84-5/85), 555B (6/85-10/88), 555C (11/88-8/93), 555D (1/70-12/73), 555D (9/93-7/96), 575D (9/93-7/96), 650 (11/75-12/77), 655 (7/85-10/88), 655A (6/85-10/88), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), 750 (11/75-12/77), 755 (1/78-12/83), 755A (1/84-12/86), 755B (1/87-1/93), Compatible with Ford Engine (s) BSD332 (9/81-later), BSD333 (H, Diesel, 1/81-later), BSD333 (1/81-later), BSD442 (1/81-later), BSD444 (HT, 1/87-later), BSD444 (H, Diesel, 12/86-later), BSD444 (1/81-later), BSD4 (Item #: 166956) $49.60

No
Picture
Main Bearing Set - For (8000 401 CID Diesel 1968-9/1972), (8000, 8200, 8600 401 CID Diesel 10/1972-7/1976), (8700 401 CID Diesel 8/1976-1978), (TW10 401 CID Diesel 1979-1982), (9000, 9200, 9600, 6/1972-7/1976), (9700 401 CID Turbo Diesel 8/1976-1978), (TW20, TW30 401 CID Turbo Diesel 1979-1982). Main Bearing Set. Specify size when ordering: Standard, .010, .020, .030. (Item #: MB401D) $130.00

No
Picture
Main Bearing Set, .010 - .010 inch bearing. Replaces 6-CFPN6333D and 1-EBPN6337D. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 105655, Ref: MBK636-010) $80.00

No
Picture
Main Bearing Set, .020 - Replaces 6-CFPN6333E and 1-EBPN6337E. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Item #: MBK636-020) $170.37

No
Picture
Main Bearing Set, .030 - Replaces 6-CFPN6333F and 1-EBPN6337F. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Item #: MBK636-030) $170.37

No
Picture
Main Bearing Set, Std - Standard. Replaces 6-CFPN6333B and 1-EBPN6337B. For tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: MBK636) $170.37

Main Bearings - Standard - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790355, 87790488, 87790356, Sold in complete set, Bearing Size: Standard, Full groove upper with slot and small oil hole, For .010" main bearing use Item #: 106430, (Item #: 106428) $104.00

PTO Brake Pad - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NNC737BA, 83913140, (Item #: 150770) $54.00

PTO Brake Pad - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NNC736BB, 83913141, D8NNC736BA, 83916740, (Item #: 150771) $57.00

No
Picture
PTO Drive Clutch Piston - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600 (& C, O), 6610 (& O, S), 6640 (& O), 6700, 6710, 6810 (& S), 7000, 7100, 7200, 7410, 7600 (& C), 7610 (& O, S), 7700, 7710, 7740 (& O), 7810 (& O, S), 7840 (& O), 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670 (& A), 8700, 8730, 8770 (& A), 8830, 8870 (& A), 8970 (& A), 9000, 9030 (& E, V), 9200, 9600, 9700, Compatible with Ford Construction and industrial models 8400 Replaces Ford OEM number F1NNN786AA, D3NNN786A, C5NNN786C, C9NNN786A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, TV6070, 7010, 8010, (Item #: 176508) $23.20

No
Picture
Rod Bearing Pair 010 - .010 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106375, Ref: DGPN6211C) $8.90

No
Picture
Rod Bearing Pair 020 - .020 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106376, Ref: DGPN6211D) $9.90

No
Picture
Rod Bearing Pair 030 - .030 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. NOTE: Please advise if 4 or 6 cylinder engine in the comment section. (Item #: DGPN6211E) $22.00

Rod Bearing Pair STD - Standard Bearing. For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106374, Ref: DGPN6211A) $9.70

$Ford TW20 Rod Bearing Std w\Oil Hole and Grove$
Rod Bearing Std w/Oil Hole and Grove - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5110, 5610, 5900, 6410, 6500, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 555C, 555D, 575D, 650, 655C, 655D, 675D, 750, 755, 755A, 755B, 7500, Replaces Ford OEM number 87790329, (Item #: 166420) $13.20

Engine Gaskets

Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Item #: 123602, Ref: C7NN6N008B) $6.60

Conversion Gasket Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000 (1972-1977), 8210, 8530, 8600 (1972-1977), 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 82845214, 83933429, 87554503, CS515206, ECPN6A008AA, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106350) $95.00

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $8.50

Crankshaft Seal, Rear - This Rear Crankshaft Seal is for 3, 4 and 6 Cylinder Engines (some gas and some diesel- not all) in models 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces D5NN6701A, D4NN6701A, C5NE6701A, C5NE6701C2, E5NN6701AA, E5NN6701BA, F0NN6701AA, 3955247, D8NN6701BA, 87802757, 83934345, 83934611, 83955247, 81869937, 83905794, 3952004, 87357537, 83904709, E2NN6010AC, E2NN6010BD, E2NN6701BA, E1NN6010KE, E1NN6010ME, 83952004, E4HN6701AA, E3NN6701BA, E2NN6010CD, E1NN6010GD, E1NN6010FE, 83943999, 83916918, 87800322, 83999513, 81813207 (Item #: 106354, Ref: E5NN6701BA) $13.60

No
Picture
Exhaust Elbow Gasket - For Ford tractor models TW20, TW30, 6600, 7000, 7100, 7200, 7600, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 750, 755, 755A, 755B, 7500, 8400, Replaces Ford OEM number C9NN5B209A, Replaces manufacturer number VPE3952, (Item #: 176431) $7.70

No
Picture
Gasket Set - H Complete gasket set. Contains upper and lower sets, and head gasket. For 8700, 9700, TW10, TW20, TW30 (Item #: FS6893) $205.54

Gasket Set - Cylinder Head Gasket Set with Head Gasket. For 8700, 9700, TW10, TW20, TW30 For 9/16 inch Head Bolts. (Item #: HS6893) $100.05

No
Picture
Gasket Set, Overhaul with Seals - For Ford tractor models TW5 (1986-earlier), TW10 (1979-82), TW20 (1979-82), TW30 (1979-82), 8000 (1/1/68-7/31/76, with 401 Diesel engine), 8200 (10/72-7/76), 8600 (10/72-7/76), 8700 (8/76-12/78), 9000 (6/72-7/76), 9200 (6/72-7/76), 9600 (6/72-7/76), 9700 (8/76-12/78), Replaces Ford OEM number OGS401-12, OGS401-916, For use w/ 1/2" head bolts and 9/16" head bolts, (Item #: 173458) $234.00

Head Gasket - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM number E9NN6051AB, E9NN6051AA, D8NN6051CA, E0NN6051CA, E0NN6051CC, E0NN6051CB, Replaces OEM number 83957685, 83956450, 83910844, 83928579, 83982125, 82855144, 83994135, 6 Cylinder, .738" dowel holes, 9/16" head bolts, (Item #: 169733) $77.00

Head Gasket Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 7810 (2/88-10/91), 7910 (1/82-10/91), 8210 (1/82-10/91), 8530 (3/90-12/93), 8630 (3/90-12/93), 8730 (3/90-12/93), 8830 (3/90-12/93), Compatible with Ford Engine (s) 401 (Diesel), Replaces Ford OEM number 83933431, ECPN6008AA, 82845226, 87554500, 83933430, Contains all gaskets necessary to replace the cylinder head (valve seals not included), For late model engines with 9/16" head bolts, (Item #: 106334) $75.00

Head Gasket Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7910, 8210, 8630, 8700, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) 401, Additional Handling and Oversize Fees Apply To This Item, (Item #: 169630) $124.00

No
Picture
Lower Gasket Set - Lower gasket set For Diesel engine in: 8700, 9700, TW10, TW20, TW30. (Item #: CS515206) $97.92

Oil Pan Gasket - Gasket, Oil Pan. For tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces 87840326, 87800945, E9NN6710DA, E9NN6710DB. (Item #: 106340, Ref: 87840326) $18.40

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.10

Valve Cover Gasket - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8360, 8400, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8830, 8870, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 8400, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 83912957, D8NN6584AA, 83976376, 81817050, Cork gasket, (Item #: 161141) $14.10

Engine Rebuild Kits

No
Picture
Basic In-Frame Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 189582, Ref: BIFF4050D) $567.00

No
Picture
Basic In-Frame Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic in-frame kit with .020 inch pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: BIFF4052D) $801.99

No
Picture
Basic In-Frame Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic in-frame kit with .030 inch pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: BIFF4053D) $881.96

No
Picture
Basic In-Frame Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic in-frame kit with .040 inch pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: BIFF4054D) $654.96

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 130796, Ref: BEKF4050D-LCB) $620.00

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .020 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131065, Ref: BEKF4052D-LCB) $638.00

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .030 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131066, Ref: BEKF4053D-LCB) $309.98

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .040 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131076, Ref: BEKF4054D-LCB) $587.00

No
Picture
Engine Rebuild Kit - Less Bearings - .040" Oversize Pistons, BSD666T, 401T - For Ford tractor models TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 8630 (3/90-8/90), 8730 (3/90-8/90), 8830 (3/90-8/90), 9700 (8/76-12/78), Compatible with Ford Construction and industrial models A66 (1/79-12/83), Compatible with Ford Engine (s) BSD666T, 401T, Standard Bore: 4.4007", Stroke: 4.400", Models 1/79-8/90, 1.625" piston pin, Crankshaft driven oil pump, Dish bowl, Keystone top ring, Ni-resist ring insert, Early rod, Kit includes: .040" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106430, Additional Handling and Oversize Fees Apply To This Item, (Item #: 131067) $620.00

Engine Rebuild Kit with Valve Train - Less Bearings, BSD666T, 401T - For Ford tractor models TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 8630 (3/90-8/90), 8730 (3/90-8/90), 8830 (3/90-8/90), Compatible with Ford Construction and industrial models A66 (1/79-12/83), Compatible with Ford Engine (s) BSD666T, 401T, Bore: 4.4007", Stroke: 4.400", Models 1/79-8/90, 1.625" piston pin, Crankshaft driven oil pump, Dish bowl, Keystone top ring, Ni-resist ring insert, Early rod, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106430, (Item #: 130805) $395.00

No
Picture
Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Engine overhaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys, less rod and main bearings. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: EOKF4050D-LCB) $1148.24

No
Picture
Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Engine overhaul kit with .020 inch pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys, less rod and main bearings. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: EOKF4052D-LCB) $1096.02

No
Picture
Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Engine overhaul kit with .030 inch pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys, less rod and main bearings. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: EOKF4053D-LCB) $1262.71

No
Picture
Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Engine overhaul kit with .040 inch pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys, less rod and main bearings. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: EOKF4054D-LCB) $1035.72

Piston and Rings - .020" - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A66, Compatible with Ford Engine (s) 401, Replaces Ford OEM number D9NN6108F-20, Replaces New Holland OEM number D9NN6108F-20, (Item #: 167054) $80.00

Piston and Rings - .040" Oversize - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A66, Compatible with Ford Engine (s) BSD666T, 401T, Replaces Ford OEM number D9NN6108F, Standard Bore: 4.4007", Includes: Piston, Pin, Rings and Retainers, Sold Per Piston, (Item #: 105653) $58.98

No
Picture
Rebore Kit - Re-bore sleeve and piston kit. For 9700, TW20, TW30. Contains Pistons, sleeves, rings, pins and pin retainers. (Item #: RBK683) $1076.70

No
Picture
Rebore Kit - 4.400 inch bore. For 9000, 9600, TW20, TW30, TW35 with 401 turbo diesel engine. (Item #: R3371) $595.35

No
Picture
Rebore Kit - .020 inch oversize. For 9000, 9600, TW20, TW30, TW35 with 401 turbo diesel engine. (Item #: R3372) $595.35

No
Picture
Rebore Kit - .030 inch oversize. For 9000, 9600, TW20, TW30, TW35 with 401 turbo diesel engine. (Item #: R3373) $595.35

No
Picture
Rebore Kit - .040 inch oversize. For 9000, 9600, TW20, TW30, TW35 with 401 turbo diesel engine. (Item #: R3374) $595.35

Engine Parts

No
Picture
Bare Block, Remanufactured, E6NN6015EA - For Ford tractor models TW10, TW20, TW30, Replaces Ford Block Casting number E6NN6015EA, Head bolts: 9/16", Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 204117) $2550.01

Camshaft - This new Camshaft is used on Ford 6 cylinder engines 1965 and up. It replaces original part numbers 87802904, C7NN6250C, DONN6250A, E1NN6250AC, E3NN6250AB. (Item #: 112179, Ref: E3NN6250AC) $213.00

$Ford TW20 Camshaft Bolt - 7\16 inch-14 x 2.937 inch - Grade 5$
Camshaft Bolt - 7/16"-14 x 2.937" - Grade 5 - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 12934, (Item #: 160908) $2.60

Camshaft Plug - Used on Ford engines: 158, 175, 192, 201, 233, 256, 268, 401 this camshaft plug replaces part numbers C5NND851B, 83994133, C5NND851A, 1816594 (Item #: 166919, Ref: C5NND851B) $42.90

No
Picture
Camshaft, Remanufactured, 87802904, E3NN6250AC - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 87802904, E3NN6250AC, C7NN6250C, E1NN6250AA, E1NN6250AB, E1NN6250AC, For a New version of this sku use Item #: 112179, (Item #: 210294) $136.01

Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number C0NN7B442A, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 81805123, (Item #: 155502) $18.20

Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number E0NN7Z031AA, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS120, 7010, 8010, Replaces New Holland OEM number 83925696, (Item #: 155540) $11.90

Connecting Rod - This Connecting Rod replaces rods with casting numbers C9NN6205C, E1NN6205EA. Used on Ford / New Holland: TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700. Fits Ford Construction and Industrials A62, A66, 575, 750, 755. 1.625 Inch piston pin. Replaces original part numbers E1NN6205, C9NN6205C, E1NN6205EA, 87801220. (Item #: 128699, Ref: C9NN6205C) $100.00

Connecting Rod - Used on Turbo-Charged Engines with 1.625 Inch Piston Pins, this connecting rod replaces Ford, New Holland part numbers 81819490, 81864273, 81875652, 83947560, 83955929, 83959784, 83973859, 87770983, C9NN6200C, E4HN6200AC, E4NN6200BA, E4NN6200BB, E8NN6200AA, E9NN6200DA, F2NN6200EA. It is used on Turbo charged engines, 1969-1988. 7000, 7100, 7200, 7600, 7700, 7410, 7610, 7710, TW15, TW20, TW25, TW35, 9000, 9600, 9700, TW30, 8630, 8730, 8830, 9200, 276V, 9030E, 9030V, 276VII, 750, 755, 555C, 655C, A62, A66, 555D, 575D, 655D, 675D, 7500, 755A, 755B. Engines BSD442, BSD666T, BSD666TI, BSD444HT, and BSD444T (Item #: 128699, Ref: F2NN6200EA) $100.00

Connecting Rod Bolt - These Connecting Rod Bolts are for gas and diesel Models: 1965 and later: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 7/16 diameter. Priced each. Uses 385279S2 nut, not included. (Item #: 114721, Ref: E4TN6214AA) $3.30

Connecting Rod Nut - Connecting Rod Nut, for gas or diesel tractors: 2000, 3000, 4000, 5000, 7000, 8000, 9000; 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700; 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710; TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA (Item #: 109429, Ref: 385279S2) $1.10

No
Picture
Connecting Rod, Remanufactured, E1NN6205 - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 575, 750, 755, Replaces Ford OEM number E1NN6205, C9NN6205C, E1NN6205EA, 1.625" Piston Pin Size, For a New version of this sku use Item #: 128699, (Item #: 210295) $119.01

Connecting Rod, Used - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 5610 (Turbo), 5900 (Turbo), 6410 (Turbo), 6610 (Turbo), 6710 (Turbo), 6810 (Turbo), 7000, 7100, 7200, 7410 (Turbo), 7600, 7610 (Turbo), 7700, 7710 (Turbo), 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 555C (Turbo), 555D (Turbo), 575D (Turbo), 655C (Turbo), 655D (Turbo), 675D (Turbo), 750, 755, 755A, 755B, 7500 Replaces Ford OEM number E9NN6200DA, F2NN6200EA, E8NN6200AA, E4HN6200AC, E4NN6200BB, E4NN6200BA, C9NN6200C, , Compatible with New Holland Hay Cutting(s) 1118, Replaces New Holland OEM nos 3973859, 81875652, 81864273, 83973859, 83959784, 3959784, 3955929, 87770983, 502164, 83955929, 83947560, 81819490, 87801220, Wrist pin bushing ID: 1.625", Squared - Non-tapered wrist pin end, Oil port drill through length of beam, For a new version of this item use Item #: 210295, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446696) $61.01

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

Crankshaft, Remanufactured, E3HN6303AA, C7NN6303 - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8600, 8630, 8700, 9000, 9600, 9700, Compatible with Ford Engine (s) 401 (diesel), Replaces Casting number E3HN6303AA, C7NN6303, C7NN6303A, C7NN6303C, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200180) $810.01

No
Picture
Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For 9000, 9200, 9600, 9700, TW20, TW30 (Item #: VOKF401T) $257.07

No
Picture
Cylinder Head with Valves, Remanufactured, D5NN6090F, D9NN6090CA - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Engine (s) 401 (Diesel), Replaces Ford Casting number D5NN6090F, D9NN6090CA, E3HN6090AB, E5HN6090AB, E6HN6090AB, E9NN6090BE, Ports: Intake - Round, Exhaust - Square, Cylinders: 6, 9/16" head bolts, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207041) $1850.01

No
Picture
Exhaust Valve - .003" Oversize Stem - For Ford tractor models TW5, TW10, TW20, TW30, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7700, 7710, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Engine (s) 256, 256T, 268, 268T, 401, 401T, Replaces Ford OEM number D8NN6505BA, Replaces manufacturer number VPA1571, Size: .003" Oversized Stem, (Item #: 176472) $18.80

Flywheel With Ring Gear - For Ford tractor models TW15 (1/1/83-later), TW20 (1/1/79-later), TW25 (1/1/83-later), TW30 (1/1/79-later), TW35 (1/1/83-later), 8530 (1/1/83-later), 8630 (1/1/83-later), 8730 (1/1/83-later), 8830 (1/1/83-later), Replaces Ford OEM number 83933404, D8NN6375BB, With 16 x 4 Transmission, 128 Teeth, (Item #: 159159) $1429.01

Ford, 87801220, New Holland, 3973859, Used - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 5610 (Turbo), 5900 (Turbo), 6410 (Turbo), 6610 (Turbo), 6710 (Turbo), 6810 (Turbo), 7000, 7100, 7200, 7410 (Turbo), 7600, 7610 (Turbo), 7700, 7710 (Turbo), 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 555C (Turbo), 555D (Turbo), 575D (Turbo), 655C (Turbo), 655D (Turbo), 675D (Turbo), 750, 755, 755A, 755B, 7500 Replaces Ford OEM nos 87801220, F2NN6200EA, E9NN6200DA, E8NN6200AA, E4HN6200AC, E4NN6200BB, E4NN6200BA, C9NN6200C, , Compatible with New Holland Hay Cutting(s) 1118, Replaces New Holland OEM nos 3973859, 81875652, 81864273, 83973859, 83959784, 3959784, 3955929, 87770983, 502164, 83955929, 83947560, 81819490, Replaces Casting nos F2HN6205AA, Wrist Pin: 1 5/8", Tapered Wrist Pin Bushing End, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443995) $175.01

Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S) $2.10

Front Engine Plate, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine(s) BSD666, BSD666T, Replaces Ford OEM nos 83956983, D8NN6N059AE, D8NN6N059AD, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435270) $79.01

No
Picture
Head Bolt Kit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9700, Replaces Ford OEM number 87802206, 87802207, 9/16" Bolts, (Item #: 166230) $156.00

Hydraulic Pump Drive Gear, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25 (with 16 GPM Pump), 8000, 8530, 8600, 8630, 8700, 8730, 9000, 9600, 9700, Replaces Ford OEM nos D6NN866A, C7NN866B, Teeth: 47, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497050) $80.01

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB) $117.00

No
Picture
Intake Valve - For Ford tractor models TW20, TW30, 7000, 7600, 7700, 7710, 9000, 9200, 9600, 9700, Compatible with Ford Engine (s) 256T, 268T, 401T, Replaces Ford OEM number D8NN6507BA, Replaces manufacturer number VPA1561, Size: .003", (Item #: 176483) $16.90

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Power Cylinder End - Cylinder End, for Power Steering Cylinder, Left End. 3 11/16 inches from center of ball joint to end, 7/8 inch-18 female thread, For tractor models 5700, 6700, 6710, 7700, 7710, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 83904282, 83934991, 83959499, D5NN3B539C, D8NN3B539AA, D8NN3B539AB (Item #: 104656, Ref: D8NN3B539AB) $52.00

Push Rod, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 5550, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos 81813399, , Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1118, 1499 Replaces New Holland OEM nos 81813399, , Compatible with Versatile Hay Cutting(s) 4750, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443449) $3.86

Rear Engine Seal Retainer - Used Ford / New Holland engines BSD442, BSD444, BSD444T, BSD666, BSD666T on equipment 1975 and later. The retainer is used with E5NN6701BA crankshaft seal and E9NN6N305AB gasket, sold separately. This part replaces original part numbers E5HN6N306AB, E5HN6N306AC, 81868536 (Item #: 168950, Ref: E5HN6N306AB) $157.00

Ring Gear, Flywheel - This ring gear measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For gas and diesel models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA) $39.20

Rocker Arm Screw - Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473) $45.00

No
Picture
Rocker Arm Shaft Support - For Ford tractor models TW10, TW20, TW30, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 5500, 5550, 6500, 7500, 8400, Replaces Ford OEM number 83952459, C7NN6531A, (Item #: 176429) $18.80

Seal Retainer Plate, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos E5HN6N306AC, , Compatible with New Holland Combine(s) TR86, TR87, TR96, TR97, TX36, Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Bale Movers(s) 1078, 1079, 1085, Compatible with New Holland Hay Cutting(s) 1118, 1499, Compatible with Versatile Hay Cutting(s) 4750, No Holes in bottom of seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434438) $31.01

Tappet, Diesel Engines - Tappet, 2.06 inches long, .990 inch diameter, DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81818724, 83946434, C5NE6500C2. (Item #: 112190, Ref: C5NE6500C2) $5.40

Timing Gear Cover, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T, 256, Replaces Ford OEM nos D9NN6059AA, D5NN6059N, D5NN6059J, D5NN6059F, D5NN6059A, D0NN6059C, Replaces Casting nos D0NN6059F, D5NN6059, D9NN6059, D9NN6059N, Fifteen: 5/16 Bolts and Two: 3/8 Bolts Around the outer edge, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435271) $125.01

Timing Gear Cover, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555E, 575E, 655, 655A, 655E, 675E, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T, 256, Replaces Ford OEM nos 87802503, E6NN6059AA, E6NN6059AC, 87800077, 87801797, Replaces Casting nos E6NN6059AB, Six: 5/16 Bolts and Eleven: 3/8 Bolts Around the outer edge, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437583) $150.01

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 230A, 345C, 445C, 4610SU, 530A, 555A, 555B, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $61.00

Valve Cover, Used - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, Replaces Ford OEM nos E5NN6582AC, D2NN6582C, E5NN6582AB, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435314) $69.01

No
Picture
Valve, Exhaust - Standard Exhaust Valve. For tractor models 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 166359, Ref: D8NN6505AA) $7.98

No
Picture
Valve, Intake - Standard Intake Valve for tractor models 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 166345, Ref: D8NN6507AB) $12.50

Valve Lifter, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2610, 2810, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8160, 8200, 8210, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 550, 555, 555E, 575E, 655, 655E, 675E, Compatible with Ford Engine(s) BSD326, BSD329, BSD332, BSD333, BSD442, BSD442T, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number C7NN6500B, C5NE6500C2, 83946434, E4HN6500AA, 83957729, C5NE6500C, , Compatible with New Holland tractor models TB90, TB100, TB110, TB120, TS80, TS90, 7010, 8010, 8240, For a new version of this item use Item #: 112190, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435585) $4.76

No
Picture
Valve Service Kit - For tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, 9700, TW10, TW20, TW30. Contains: springs, locks, (no valves). (Item #: VSKF401) $60.94

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A) $2.80

Valve Train Set - For Ford tractor models TW20 (1979-1982), TW30 (1979-1982), 9000 (6/1972-7/1976), 9200 (6/1972-7/1976), 9600 (6/1972-7/1976), 9700 (8/1976-1978), Replaces Ford OEM number D0NN6507J, 107159A, 41339D, 70209103, 81817098, 81824116, 81825866, 81842754, 81865609, 81876796, 83909917, 83912598, 83946444, 87295255, 87295256, 87800340, 87802262, 887800386, C1AE6518A, C5NE6513A, C7NN6513A, C9NN6505E, D0NN6505A, D3NN6507E, D6NN6505A, D8NN6507AA, D8NN6507AB, F2NN6518AA, T20077, VPA1560, VPA1570, VPA2010, VPA2302, Guides Not Included, (Item #: 114665) $191.00

Engine Pistons and Sleeves

No
Picture
Piston and Ring Kit - .020 inch Oversize Piston and Ring Kit. For 9700, TW20, TW30. (Item #: PRKF405-020) $665.23

No
Picture
Piston and Ring Kit - .030 inch Oversize Piston and Ring Kit. For 9700, TW20, TW30. (Item #: PRKF405-030) $888.24

No
Picture
Piston and Ring Kit - .040 inch Oversize Piston and Ring Kit. For 9700, TW20, TW30. (Item #: PRKF405-040) $587.63

No
Picture
Piston and Ring Kit - Standard Bore Piston and Ring Kit. For 9700, TW20, TW30. (Item #: PRKF405) $701.80

No
Picture
Piston Pin Bushing - Pin Bushing. For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 163922, Ref: C9NN6207C) $8.50

Piston Sleeve - (FORD) Sleeve- Cylinder - Finished - Sleeve only. 4.4 inch bore diesel engine. Replacement for re-bore kits listed. Finished bore and honed. (Item #: 160021, Ref: RBS514) $37.30

Piston Sleeve - Engines 401 CID Diesel and Turbo Diesel, 192 CID Gas, 201 Gas and Diesel, 256 CID Gas and Diesel, 256 Turbo Diesel, 233 Diesel, 268 Non Turbo and Turbo Diesel. Semi-Finished 4.4 inch bore used when boring Non Sleeved Engine. For tractor models 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 160021, Ref: SD753) $37.30

No
Picture
Piston With Rings 020 - .020 inch Oversize Piston. For 9700, TW20, TW30. (Item #: 111749, Ref: D7NN6108C) $222.00

No
Picture
Piston With Rings, .030 - Oversize Piston. For tractor models 9700, TW20, TW30. (Item #: 173289, Ref: D7NN6108D) $245.00

No
Picture
Piston With Rings 040 - .040 inch Oversize Piston. For 9700, TW20, TW30. (Item #: 172365, Ref: D7NN6108E) $159.02

No
Picture
Piston With Rings STD - Standard Bore Piston. For 9700, TW20, TW30. (Item #: D7NN6108A) $132.18

Engine Rings

Piston and Rings, .030" - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A66, Compatible with Ford Engine (s) 401, Replaces Ford OEM number D9NN6108F-30, .030", (Item #: 167127) $60.98

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7910, 8210, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 83905823, 81824112, 83904265, 83918842, 87295236, 87554740, DAPN6149A, DFPN6149BE, DFPN6149E, DKPN6149A, Bore: 4.4007", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (2) @ .094”, Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as 6 Cylinder Piston Ring Set, For Piston Ring Set - Standard - Single Cylinder use Item #: 120796, (Item #: 174328) $190.00

No
Picture
Ring Set - .020 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120797, Ref: DFPN6149B) $9.20

No
Picture
Ring Set - .030 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 108032, Ref: DFPN6149C) $34.90

No
Picture
Ring Set - .040 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120798, Ref: DFPN6149D) $23.20

No
Picture
Ring Set - Standard Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120796, Ref: DFPN6149E) $36.60

Exhaust System

Exhaust Elbow Pipe - For Ford tractor models TW15, TW20, TW30, TW35, 8630, 8730, 8830, Replaces Ford OEM number D8NN5246AA, 83912967, (Item #: 128480) $305.00

Exhaust Manifold Gasket - For tractor models 550, 555, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 4000, 4600 with C5NE9430A manifold uses 1 gasket and models 8000, 8600, 9000, 9600 with C9NN9430B and C9NN9431B manifolds uses 2 gaskets. (Item #: 101521, Ref: C5NE9448A) $7.10

No
Picture
Exhaust Manifold - Rear, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8210, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D5NN9431A, 83903562, For a new version of this item use Item #: 101533, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436459) $38.01

Manifold - Front section. For tractor models 7910, 8210, 8700, 9700, TW20, TW10, TW30. Gaskets NOT included. (Item #: 101532, Ref: D8NN9430AB) $141.00

Manifold - Rear section. For tractor models 7910, 8210, 8700, 9700, TW10, TW20, TW30. Gaskets NOT included. (Item #: 101533, Ref: D5NN9431A) $67.00

Manifold - Front. For tractor models 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces D8NN9430AB. (Item #: 101532, Ref: R0291) $141.00

Manifold - Rear. For tractor models 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces OEM# D5NN9431A. (Item #: 101533, Ref: R0292) $67.00

Muffler - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM number 83928167, Additional Handling and Oversize Fees Apply To This Item, (Item #: 165189) $155.00

Muffler - Vertical Exhaust inlet 3 1/2 inch inside diameter, outlet 3 1/2 inch outside diameter, overall length 44 1/2 inch. For 9600, 9700, TW10, TW20, TW30 with 6 cylinder diesel engine. OEM part numbers use MC312 clamp, use R1806 rain cap. Replaces D6NN5230AJ (Item #: 100596, Ref: R1638) $257.15

Muffler, Vertical - Oval body. Inlet 3-1/2 inch inside diameter, outlet 3-1/2 inch outside diameter, 48 inches overall length. For tractor models 8630, 8730 6 cylinder 1990 to 1993, 8830, TW15, TW20, TW25, TW35. (Item #: 100600, Ref: E4NN5230BA17M) $159.98

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl, 7 1/2 inch outside diameter, for 2-1/4 inch inlet pipe. For 5910, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 9000, TW10, TW20. Replaces C0NN9A663A. (Item #: 157279, Ref: R28794) $8.20

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Item #: 121925, Ref: T23262) $6.30

Banjo Bolt - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 420, 445, 445A, 450, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B, Replaces Ford OEM number 21470ES80, D1NN9R523A, D1NNR523A, 81825730, Replaces Case IH OEM number 81825730, D1NN9R523A, (Item #: 181440) $7.80

Breather Cap 3" - For Ford tractor models TW5, TW10, TW15, TW20, TW25, 3610, 6610, 7700, 7710, 8700, 9700, Replaces Ford OEM number C7NN9B646A, C7NN9B646A12M, F2NN9B646AA12, Breather Cap For 3" Pipe, For Tractors With 3" Intake Pipe, (Item #: 112381) $24.80

Double Filter Head - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5110, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 555, 555A, 555B, 655, 655A, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number 83914031, D8NN9N180AA, 84515567, D9NN9165AA, , Compatible with Massey Ferguson tractor models 3090, 3630, 3650 Replaces Massey Ferguson OEM nos 1895160M1, , Compatible with New Holland Hay Cutting(s) 1118, (Item #: 165353) $27.44

Fuel Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3415, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9700 Replaces Ford OEM number C5NN9030A, E7NN9030AA, , Compatible with New Holland tractor models TC30, Replaces OEM number 81811847, 83900753, 83904042, 83929889, 83947669, 83947845, 83961128, SBA360300080, D5NN9030A, D8NN9030BA, E1NN9030AA, E3NN9030AA, E6NN9030BA, For Diesel fuel only, (Item #: 153470) $3.98

Fuel Cap, Diesel - Cap. For tractor models 2000, 2600, 2810, 2910, 3000, 3600, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610SU, 5000, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E7NN9030AA. This is a non-vented cap. (Item #: 185782, Ref: D5NN9030A) $9.10

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35 -- Industrial: 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 3400, 345C, 345D, 3500, 3550, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 650, 6500. (Item #: 184806, Ref: C5NN9030D) $8.90

Fuel Filter - 4-3/8 inches high fuel filter. For tractor models TW10, TW20, TW30. (Item #: 125902, Ref: CAV7111_796) $19.50

Fuel Filter Bowl - Sediment bowl with a center hole inside diameter of 1 inch. 2 inches in height. 3.689 inches outside diameter on the gasket mounting flange, and a bowl outside diameter of 3.3 inches. This bowl has a flat bottom with a squared edge. For 3230, 3430, 3930, 4130, 4630, 4830, 5030, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces D8NN9162BA. (Item #: 112644, Ref: 1024386M1) $5.20

No
Picture
Fuel Injector - For tractor models 260C, 4600, 4610, 5900, (TW20, 5610 Swiss made), (6600, 6700 Europe made), 540, 540A, 545, 650, BSD333H. (Item #: 119905, Ref: D8NN9F593DB) $73.00

Fuel Injector, Remanufactured, C9NN9F593B - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 3000 (3 Cylinder), 3055 (3 Cylinder), 3100 (3 Cylinder), 3120 (3 Cylinder), 3150 (3 Cylinder), 3190 (3 Cylinder), 3300 (3 Cylinder), 3310 (3 Cylinder), 3330 (3 Cylinder), 3400 (3 Cylinder), 3500 (3 Cylinder), 3550 (3 Cylinder), 5000 (4 Cylinder), 5100 (4 Cylinder), 5190 (4 Cylinder), 5200 (4 Cylinder), 5340 (4 Cylinder), 7000 (4 Cylinder), 7100 (4 Cylinder), 7200 (4 Cylinder), 8000 (6 Cylinder), 8200 (6 Cylinder), 8400 (6 Cylinder), 8600 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9200 (6 Cylinder), 9600 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models A62, A64, A66, Replaces Ford OEM number C9NN9F593B, C9NN9F595A, C9NN9F593BR, For a New version of this sku use Item #: 119912, (Item #: 210595) $87.01

Fuel Injector, Remanufactured, D4NN9F593A, D4NN9F595A - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 2600 (3 Cylinder), 3600 (3 Cylinder), 3900 (3 Cylinder), 4100 (3 Cylinder), 4600 (3 Cylinder), 4610SU (3 Cylinder), 5600 (4 Cylinder), 5700 (4 Cylinder), 6600 (4 Cylinder), 6700 (4 Cylinder), 7600 (4 Cylinder), 7700 (4 Cylinder), 8000 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models 231 (3 Cylinder), 233 (3 Cylinder), 333 (3 Cylinder), 335 (3 Cylinder), 340 (3 Cylinder), 340A (3 Cylinder), 340B (3 Cylinder), 420 (3 Cylinder), 445 (3 Cylinder), 445A (3 Cylinder), 450 (3 Cylinder), 515 (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 540 (3 Cylinder), 540A (3 Cylinder), 540B (3 Cylinder), 545 (3 Cylinder), 545A (3 Cylinder), Replaces Ford OEM number D4NN9F593A, D4NN9F595A, For a New version of this sku use Item #: 119907, (Item #: 210592) $90.01

Fuel Injector, Remanufactured, D8NN9F593BA - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 8000 (6 Cylinder), 8200 (6 Cylinder), 8400 (6 Cylinder), 8600 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9200 (6 Cylinder), 9600 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models A62 (4 Cylinder), A64 (4 Cylinder), A66 (4 Cylinder), Compatible with Ford Engine (s) BSD666, BSD666T, Replaces Ford OEM number D8NN9F593BA, D8NN9F593BAR, For a New version of this sku use Item #: 119913, (Item #: 210596) $100.01

Fuel Injector, Remanufactured, D8NN9F593DB - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 2310 (3 Cylinder), 2600 (3 Cylinder), 2610 (3 Cylinder), 2810 (3 Cylinder), 2910 (3 Cylinder), 3610 (3 Cylinder), 3900 (3 Cylinder), 3910 (3 Cylinder), 4100 (3 Cylinder), 4110 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 4610 (3 Cylinder), 4610SU (3 Cylinder), 5110 (3 Cylinder), 5600 (4 Cylinder), 5610 (4 Cylinder), 5700 (4 Cylinder), 5900 (4 Cylinder), 6410 (4 Cylinder), 6500 (4 Cylinder), 6600 (4 Cylinder), 6610 (4 Cylinder), 6700 (4 Cylinder), 6710 (4 Cylinder), 6810 (4 Cylinder), 7410 (4 Cylinder), 7600 (4 Cylinder), 7610 (4 Cylinder), 7700 (4 Cylinder), 7710 (4 Cylinder), 8000 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models 230A (3 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 234 (3 Cylinder), 250C (3 Cylinder), 260C (3 Cylinder), 333 (3 Cylinder), 334 (3 Cylinder), 335 (3 Cylinder), 340 (3 Cylinder), 340A (3 Cylinder), 340B (3 Cylinder), 420 (3 Cylinder), 445 (3 Cylinder), 445A (3 Cylinder), 450 (3 Cylinder), 515 (3 Cylinder), 530A (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 540 (3 Cylinder), 540A (3 Cylinder), 540B (3 Cylinder), 545 (3 Cylinder), 545A (3 Cylinder), 550 (3 Cylinder), 555 (3 Cylinder), 555A (3 Cylinder), 555B (3 Cylinder), 650 (4 Cylinder), 655 (4 Cylinder), 655A (4 Cylinder), 750 (4 Cylinder), 755 (4 Cylinder), 755A (4 Cylinder), 755B (4 Cylinder), 7500 (4 Cylinder), Compatible with Ford Engine (s) BSD332, Replaces Ford OEM number D8NN9F593DB, D9NN9F593AA, D5NN9F592AR, D4NN9F593BR, D4NN9F593B, D4NN9F595A, For a New version of this sku use Item #: 119905, (Item #: 210588) $90.01

Fuel Injector, Remanufactured, D9NN9F593DA - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2600, 3600, 3900, 4600, 4600SU, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 333, 335, 420, 515, 531, 532, 535, Compatible with Ford Engine (s) BSD442, BSD444, BSD666, Replaces Ford OEM number D9NN9F593DA, For a New version of this sku use Item #: 119904, (Item #: 210002) $84.01

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Item #: 156291, Ref: C5NE9F596A) $2.10

Fuel Lift Pump Repair Kit - Used to repair original equipment fuel lift pumps on Ford / New Holland models: 2150, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5610, 5900, 6410, 650, 6500, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Major, Super Major, TW10, TW15, TW20, TW25, TW30, TW35, TW5. This repair kit replaces OEM numbers 81458909, 500093, 693F9K340AA, B1016 (Item #: 172699, Ref: 693F9K340AA) $20.60

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. (Item #: 172699, Ref: S40569) $20.60

Fuel Shut Off Cable - This new Fuel Shut Off Cable fits 550 LOADER, 555 LOADER, 555A LOADER, 555B LOADER, 650, 6500, 655, 655A, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. It is 63" long. Replaces OEM part numbers E5NN9C331DA, E5NN9C331DB. (Item #: 164879, Ref: E5NN9C331DA) $15.80

Fuel Tank Valve Tap - Metal Fuel Tap with Screen for Gas and Diesel: Major, Super Major, 2000 (1965 and up), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000 (1965 and up), 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5600, 5610, 5700, 5900, 6600, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30. INDUSTRIALS: 550, 555A, 555B, 655, 655A. Tank tap is 7/8" tapered by 14 pitch (1/2 pipe thread), fuel line is 1/2" by 20 pitch UNF (5/16 inch tubing nut). Replaces D1NN9N024B, 83935915, 83917402, C5NN9N024A, D1NN9N024A, D2NN9N024C, E1ADDN9189B, E0NN9N024AA, E2NN9N024AA, E2NN9N200A, D8NN9N024AB, 81830037, 83926534, D8NN9N024AA (Item #: 181076, Ref: E2NN9N024AA) $9.50

Fuel Transfer Pump - Lift Pump, 2-bolt. Mounts to Injection Pump. For Super Major (8-1961/1964), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Transfer Pump. Used on 3, 4 and 6 Cylinder Diesel Engines. Replaces: 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. Uses S40569 Repair Kit. (Item #: 106200, Ref: D8NN9350AB) $21.60

No
Picture
Injector - Diesel Fuel Injector. For 401-TCID, 401-TICID, 9000, 9600, 9700, A66, TW20, TW30. (Item #: 119913, Ref: D8NN9F593BA) $85.57

Precleaner Assembly - For tractor models 8630, 9030E, 9030V, 9700, TW15, TW20. Inlet opening 4.5 inch diameter, bowl is 10 inches in diameter. Nylon base with steel top cap. Uses 1109-9501 center bowl. Does not include clamp. Also replaces 86011276. (Item #: 115855, Ref: 83904364) $45.60

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $9.30

Hitch / Drawbar

No
Picture
Drawbar - For tractor models 7310, 7910, 8000, 8210, 8530, 8630, 8700, 8830, 9000, 8700, TW10, TW20, TW5. Drawbar is straight, 42.5 inches in length, 3 inches wide and 1.375 inches thick. Two 1.141 diameter front holes at 1.125 and 3.25 inches from front. Add additional $20 shipping due to 47.5 lbs weight. (Item #: 110099, Ref: D3NN805A) $246.44

Gear, Leveling Box - Leveling box gear for tractor models 5000, 7000, 8000, 8700, 9000, 9600, 9700, 5600, (5610, 6610, 6710, 6810, 7610, 7710, 5900 up to 12/82), 6600, 6700, 7600, 7700, TW10, TW20, TW30. (Item #: 185110, Ref: C7NN568B) $21.30

Inner Lift Link Stabilizer - LH, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8200, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM nos D9NNG893AA, D9NNG893A, Replaces Ford Casting nos 83919389, May be swapped with Right Hand lift link stabilizer to be used in alternative working position height location, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431735) $90.01

Inner Lift Link Stabilizer - RH, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8200, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM nos D9NNG892AA, D9NNG892A, To change working position it may be switched sides with LH Lift Link Stabilizer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431736) $90.01

Torsion Bar Tube, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000 (Series), 8200, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000 (Series), 9200, 9600, 9700, Replaces Ford OEM nos D8NN580AA, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497971) $540.01

Torsion Bar, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000 (Series), 8200, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000 (Series), 9200, 9600, 9700, Replaces Ford OEM nos C7NNF970C, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497931) $204.01

Hydraulic System

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref: C5NNN901A) $9.60

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $15.10

Hydraulic Pump - For tractor models TW10, TW20 1979-1982, TW5, TW15, TW20. Hydraulic Pump, transmission mounted pump. (Item #: 104239, Ref: D8NN600FA) $295.00

Hydraulic Pump - Dynamatic - For Ford tractor models TW5, TW10, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 115518, (Item #: 157620) $523.00

Hydraulic Pump, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584, Mounts in transmission housing, 20 GPM, For a new version of this item use Item #: 115518, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415518) $176.01

Hydraulic Pump, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, Replaces Ford OEM number D8NN600FA, 83913537, Transmission mount, 16 GPM, For a new version of this item use Item #: 104239, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404239) $178.01

Hydraulic Quick Release Coupling, Male - Male Tip-Check Valve Assembly, Implement Half. 1/2 - 14 Pipe Thread 3000 psi. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30. (Item #: 119129, Ref: D5NNB964A) $10.70

Lights

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $26.80

Miscellaneous

No
Picture
Cab Foam Floor Mat, Black - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 6710, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, Color: Black, Kits are computer cut to assure accuracy, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112836) $145.00

Cab Foam Kit - 9-Piece Black. For tractor models 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Toolbox on Left Fender (Item #: 180741, Ref: R3237) $490.00

No
Picture
Cab Foam Kit - 8-Piece Blue. For tractor models 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Toolbox on Left Fender (Item #: 112825, Ref: R3238) $328.00

No
Picture
Cab Foam Kit less Headliner, Blue - For Ford tractor models TW10, TW20, TW30 (all with standard tool box), 8700, 9700, Color: Blue, Kits are computer cut to assure accuracy, 5 Pieces, Includes 1 can of Spray Adhesive, For Headliner use Item #: 112727, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112832) $343.00

No
Picture
Cab Headliner - 1-Piece Blue. For tractor models 6700, 8700, 9700, TW10, TW20, TW30. This part must ship Truck Freight. Additional $100.00 shipping due to weight. (Item #: 112824, Ref: R3254) $370.00

No
Picture
Drive Clutch Piston Spring Retainer Snap Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 501, 541, 600, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3600, 4000, 4000SU, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 5000, 5100, 5110, 5200, 5600, 5610, 5610S, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4400, 4500, 8400 Replaces Ford OEM number PBB77517A, , Compatible with New Holland tractor models TB100, TB110, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number PBB77517A, (Item #: 176669) $5.50

No
Picture
Headliner Retainers - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2600, 3600, 4100, 4600, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8700, 9700, Compatible with Ford Construction and industrial models 233, 333, 16 Pack, (Item #: 172200) $31.40

No
Picture
Weather Strip Seal Kit - Side Window - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3600, 4600, 4610, 5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 8210, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D8NN9429732BC, D8NN9429732BB, D8NN9429733BC, Replaces OEM number 83947573, D8NN9429733BB, 83947572, Sold as a pair, Right and Left Hand side windows, Weather Seal must be glued in., (Item #: 170442) $301.00

No
Picture
Weather Strip Seal - Rear Glass Molding Kit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5110, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Replaces Ford OEM number E7NN9442082AA, 83961300, D8NN9442082GC, For Sliding/American Style Rear Glass, Length: 159", Molding makes full circle, Molding must be glued in, (Item #: 170491) $257.00

Oil System

No
Picture
Dipstick, Engine Oil - For tractor models 445, 445A, 450, 455, 455C, 455D, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, (6410, 6810, 7410 prior to 12/1988), 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6700, 6710, 675D, 675E, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 8000, 8200, 8400, 8600, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 113916, Ref: 83982499) $8.50

Double Filter Head, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5110, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 555, 555A, 555B, 655, 655A, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number 83914031, D8NN9N180AA, 84515567, D9NN9165AA, , Compatible with Massey Ferguson tractor models 3090, 3630, 3650 Replaces Massey Ferguson OEM nos 1895160M1, , Compatible with New Holland Hay Cutting(s) 1118, For a new version of this item use Item #: 165353, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448001) $14.76

Engine Oil Filter Conversion Kit - Converts Element/Canister style filter to Spin On type. Use filter E7NN6714BA (not included). Fits 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700. Replaces DKPN6882A, E9NN6884AA, D8NN6N818AA, 87097S95, D8NN6890BA, 83916925, 83914060, 83981595. (Item #: 115060, Ref: DKPN6882A) $110.00

Oil Dipstick - This Dipstick is 7 7/8 inches long. It is used on many Ford agriculture and industrial models, 1975 and later. Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Item #: 113916, Ref: E9NN6750BA) $8.50

Oil Filler Cap - Fits ALL 3, 4, and 6 cylinder models that are 1975 and NEWER, Including: 2600, 2310, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4600, 4610, 4630, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces: 81823214, 83907851, 87763303, 87867228, C7NN6N609B, C9NN6N609A, D5NN6N609A (Item #: 123584, Ref: 83907851) $10.20

Oil Filter - Engine Oil Filter, Cartridge Element, 2 quart. Measures 4 1/2 inches outside diameter, 11/16 inches hole diameter and 4 7/8 inches in length. For 3, 4 and 6 Cylinder Engines (1965 to 1979) on models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20. (Item #: 181771, Ref: DGPN6731A) $12.40

Oil Filter, Spin on - Used with DKPN6882A adapter. Fits models 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600 and 9700 (Item #: 115061, Ref: E7NN6714BA) $37.40

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 655E, 755, TW5, TW10, TW15, TW20, TW25, TW30, TS90, TS100, TS110. Replaces 81873524, F1NN9278AA, D8NN9278AA. D8NN9278BA, 500630, C8NF9278B, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278BD, D8NN9278D, F0NN9278AA, F1NN9278AA Note: connection point could vary. (Item #: 153774, Ref: D8NN9278BD) $5.90

Oil Pump - For tractor models TW10, TW20, TW30 (1979-1982), TW15, TW25, TW35 (1983-2/1990), 8630, 8730, 8830 (From 3/1990) with 6-Cylinder Diesel Engines. Replaces 83951804, 83943988, D8NN6600AJ, D8NN6600AH, D8NN6600AG, D8NN6600AE, D8NN6600AC, D8NN6600AA (Item #: 150912, Ref: OP1722) $400.00

PTO / Driveline

$Ford TW20 Dual Power\ PTO Disc$
Dual Power/ PTO Disc - This Dual Power/PTO Disc measures 5.84 inches outside diameter, 4.500 inside diameter with 52 teeth. It replaces original part numbers C9NNP743A, C9NNP743D, D3NNP743A, 81822308, 81830023, 81830026. (Item #: 109833, Ref: C9NNP743D) $12.50

No
Picture
PRO Drive Shaft - For tractor models TW10, TW20, TW30 all above 1979. Drive shaft is 37.5 inches long, 22 and 25 Splines. (Item #: 113931, Ref: D8NN7A684AB) $351.00

PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283) $4.10

PTO Clutch Plate - This is a Steel PTO Clutch Plate. It measures 6.062 inches outside diameter, 4.448 inch inside diameter and has 60 teeth. It replaces original part numbers 81808607, D6NNC730A, PBB77573A, PBB77573AA, 1102-5506, 81565601. (Item #: 104211, Ref: PBB77573A) $5.10

PTO Drive Hub - Heavy - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5640, 8000 (9/69-1978), 8200 (9/69-1978), 8400 (9/69-1978), 8530, 8600 (9/69-1978), 8630, 8700 (9/69-1978), 8730, 8830, 9000 (9/69-1978 with 8 speed transmission), 9200 (9/69-1978 with 8 speed transmission), 9600 (9/69-1978 with 8 speed transmission), 9700 (9/69-1978 with 8 speed transmission), Replaces Ford OEM number D8NNN778AA, 778AAN, 83913005, 87554790, 22 spline hub, (Item #: 104217) $154.00

PTO Drive Hub, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5640, 8000 (9/69-1978), 8200 (9/69-1978), 8400 (9/69-1978), 8530, 8600 (9/69-1978), 8630, 8700 (9/69-1978), 8730, 8830, 9000 (9/69-1978 with 8 speed transmission), 9200 (9/69-1978 with 8 speed transmission), 9600 (9/69-1978 with 8 speed transmission), 9700 (9/69-1978 with 8 speed transmission), Replaces Ford OEM number D8NNN778AA, 778AAN, 83913005, 87554790, Splines: 22, For a new version of this item use Item #: 104217, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430547) $79.01

PTO Driven Gear, 1000 RPM, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM nos D8NNA726DA, 94 Teeth, 8 Splines, 11 3/8" Diameter, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497965) $400.01

PTO Output Shaft - Used on 8530, 8630, 8670, 8670A, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, TW10, TW15, TW20, TW25, TW30, TW35, TW5, this PTO output shaft measures 1.75 inch - 20 spline output, 1.95 inch 8 spline transmission side, and 12.360 inches long. Replaces OEM numbers 83957545, D8NNB728CC. Note, this PTO shaft is also used on Fiat G170, G190, G210, G240 (Item #: 173024, Ref: D8NNB728CC) $394.00

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $12.10

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.6mm inside diameter x 95.6 outside diameter x 12.5mm wide (3.75 inches x 2.85 inches x 0.56 inches wide). Used on Ford / New Holland 3600, 4600, 5110, 532, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 6810S, 7010, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8670A, 8700, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, 9200, 9700, TS100, TS100 Brazilian, TS110, TS110 Brazilian, TS115, TS120 Brazilian, TS80, TS90, TV140, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81819768, 83955173, 9823545, 89823545, D9NNN710BC, D9NN710BC (Item #: 128143, Ref: 9823545) $26.80

PTO Output Shaft Sleeve - For (5640, 6640, 7740, 7840, 8240, 8340, all Non-Shiftable 11/1991 and up), (7810, 7910, 8210, all Non-Shiftable 1982-10/1991), (5610S, 6610S, 7610S, 7810S, all 1/1994 and up), (TW10, TW20, all 1979-1982), (5610, 6610, 6710, 7610, 7710, all 1981-10/1991), (TW15, TW25, TW5 all 1983-2/1990), (7010S 4/1996 and up). PTO Output Shaft Sleeve for 540 and 1000 RPM Two Speed Independent PTO. Replaces 83946838, D8NNB733AB, D8NNB733AC, 83913955, 82972881 (Item #: 163801, Ref: D8NNB733AC) $130.00

PTO Piston O-Ring - This is the Inner PTO Piston O-Ring Seal. Replaces 373227S 83416992. (Item #: 172963, Ref: 373227S) $1.70

PTO Piston O-Ring - This is the Outer PTO Piston O-Ring Seal. It replaces C0NN7A548A, CFPN6333A/B, 81805281 (Item #: 172955, Ref: C0NN7A548A) $4.10

PTO Piston Return Spring - Replacing Ford / New Holland part numbers 81871420, 83935173, C0NN7C151A, 9823824, D7NNC732A, 81804819, this Spring is used in tractors with independent PTOs. Used on Ford / New Holland models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TS100, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 124549, Ref: D7NNC732A) $20.40

PTO Shaft - For tractor models (5110, 5610, 5900, 6410, 5410 UK, 6610, 6710, 6810, 7610, 7710, all with single speed PTO 10/1989 and later), (5640, 6650, 7740 all with single speed 11/1990 and later). PTO Shaft 540 RPM. 11.764 inches long, 28 tooth drive splines. (Item #: 111990, Ref: E8NN710AA) $336.00

PTO Shaft, 1000 RPM - 1 3/8" 21 spline Shaft, 11.7 in long shaft.Shaft, PTO drive output, 1000 rpm. For tractor models 5610S, 5610, 5640, 6610S, 6610, 6640, 6710, 7010S, 7610S, 7610, 7710, 7740, 7810S, 7810, 7840, 7910, 8210, 8240, 8340, TW10, TW20, TW25, TW5. (Item #: 111391, Ref: D8NNB728BC) $160.00

PTO Shaft, 540 RPM - 1 3/8 inch 6 Spline Shaft, PTO Drive Output, 540 RPM. For tractor models 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810, 7910, 8210, 8670, TW5, TW15, TW25, TS90, TS100, TS110, TW10, TW20. Replaces E6NN728AA, E6NNB728AA, 9823572, 83959984, 83913106 (Item #: 109919, Ref: E6NNB728AA) $142.00

PTO Thrust Washer - This PTO Thrust Washer is used on 5000, 5600, 5610, 5610S, 5640, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7610S, 7700, 7710, 7740, 8000, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9600, 9700, TS100, TS110, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces C5NNN783A, 81801955 (Item #: 178082, Ref: C5NNN783A) $5.70

Seats

No
Picture
Arm Rests - Pair - Blue Vinyl on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Item #: 178479, Ref: R1164) $202.00

No
Picture
Arm Rests - Pair - Blue Fabric on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Item #: 101999, Ref: R1167) $125.00

No
Picture
Seat Bottom - Blue Vinyl on Steel For 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 (Item #: 178478, Ref: R1162) $266.00

No
Picture
Seat Bottom - Blue Fabric on Steel. For tractor models 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Item #: 178472, Ref: R1165) $289.00

Sheet Metal / Body Parts

Grill Screen - LH - Grill Screen for side panel left. For tractor models 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, TW10, TW15, TW20, TW5. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155820, Ref: D5NN8151A) $102.00

Grill Screen - RH - Grill Screen for side panel right. For tractor models 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155822, Ref: D5NN8150A) $77.00

Grill Side Panel - Left - Side panel for left front of tractor. DOES NOT INCLUDE GRILL INSERT IN PICTURE. Uses grill insert part number D5NN8151A. For tractor models 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5. (Item #: 152194, Ref: D9NN8A135AA) $223.00

Grill Side Panel - Right - Side panel for right front of tractor. DOES NOT INCLUDE GRILL INSERT AS PICTURED. Grill insert part number D5NN8150A. For tractor models 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5. (Item #: 152193, Ref: D9NN8A134AA) $244.00

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $27.00

No
Picture
Tool Box Lid, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8210, 8700, 9700, Replaces Ford OEM number 5135060, Verify Size When Ordering, Tool Box Lid Measures 16-1/2", For a new version of this item use Item #: 152205, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436103) $40.01

Wheel Weight, Rear - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9700 Replaces Ford OEM number D8NN1A002AA, , Compatible with New Holland tractor models 8670, 8770, 8870, 8970, Replaces New Holland OEM number 86027372, OD: 28 ", ID: 16 3/8 ", Thickness: 5 1/2 ", Weight: 432 lbs each, Hole Pattern: 3 @ 15 1/2 ", Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 128843) $662.00

Steering

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.60

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $5.10

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $5.90

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

No
Picture
O-Ring and Plug Assembly - For Ford tractor models TW10, TW20, TW30, 5000, 5200, 5700, 6700, 7000, 7200, 7700, 8000, 8400, 8600, 8700, 9000, 9600, 9700, Replaces Ford OEM number D1NN3R684A, 036147A1, (Item #: 126955) $2.98

Power Steering - PUMP with Reservoir with barbed return fitting For 8000, 8600, 8700, 9000, 9600, 9700, TW-5, TW-10, TW-15, TW-20, TW-25. Also replaces D7NN3K514G. (Item #: 111311, Ref: E0NN3K514AB) $395.00

No
Picture
Power Steering - PUMP with Reservoir with Pipe Return Fitting For 8000, 8700, 9700, TW-10, TW-20 (Item #: R4109) $830.85

Power Steering Cylinder Shaft - This Power Steering Cylinder Piston and Rod and a 2.234 Outside Diameter. It is used on 5700, 6700, 7700, 7710, 7910, 8210, 8700, 9700, TW10, TW20, TW30. Use with DGPN3301B Seal Kit. Replaces original part number D5NN3N797A, D5NN3N699A (Item #: 179350, Ref: D5NN3N797A) $168.00

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $0.50

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $12.10

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.20

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.60

Spindle Bushing - This is a Lower Spindle Bushing used in multiple Ford Tractors. Measures 1.94 inches ID, 2.06 inches OD, and 1.75 inches long. Replace original part numbers C0NN3110A and 81812242. (Item #: 100243, Ref: C0NN3110A) $9.80

No
Picture
Spindle - LH - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 8700, 9700, Replaces Ford OEM number D5NN3106C, Dimension A: 16.775", Dimension B: 1.722", Dimension C: 1.934", Dimension D: 1.794", Dimension E: 1.125", Left Side, (Item #: 100650) $460.00

Spindle Nut - Fits on front spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

No
Picture
Spindle - RH - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 8700, 9700, Replaces Ford OEM number D5NN3105C, Dimension A: 16.775", Dimension B: 1.722", Dimension C: 1.934", Dimension D: 1.794", Dimension E: 1.125", Right Hand, (Item #: 100649) $463.00

$Ford TW20 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D9NN3105AA, Dimension A: 14.75", Dimension B: 1.999", Dimension C: 2.000", Dimension D: 1.500", Right or Left Side, (Item #: 100646) $869.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.40

Steering Arm - This Steering Arm is used on Ford/New Holland Models: 5700, 6700, 7700, 6710, 7710, 7810, 7910, 8210, 8700, 9700, TW10, TW20, TW30 Replaces original part number D5NN3131B (Item #: 104744, Ref: D5NN3131B) $249.00

Steering Arm - For Ford tractor models TW10, TW20, 5700, 6700, 6710, 7700, 7710, 8200, 8700, 9700, Replaces Ford OEM number D5NN3131C, 39 Tooth Spline, LH Steering Arm, Steering Arm - Right Hand use Item #: 104745, (Item #: 104746) $128.00

Steering Arm - Left Hand - For Ford tractor models TW10, TW20, Replaces Ford OEM number D8NN3131GA, 39 Tooth Spline, LH Steering Arm, (Item #: 104751) $172.98

Steering Arm - Left Hand - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NN3131JA, 42 Tooth Spline, LH Steering Arm, Heavy Duty, (Item #: 104753) $407.00

Steering Arm, RH - Our New Steering Arm is used on the right side for models with 2 wheel drive and short wheelbase. Ford / New Holland 5700, 6700, 6710, 7700, 7710, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 86533883, D5NN3130B (Item #: 104745, Ref: D5NN3130B) $134.98

Steering Arm - Right Hand - For Ford tractor models TW10, TW20, TW30 (All with heavy duty front axle), Replaces Ford OEM number D8NN3130GC, 42 Tooth Spline, RH Steering Arm, (Item #: 118744) $236.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Motor - For Ford tractor models TW5, TW10, TW20, TW30, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 9000, 9700, Replaces Ford OEM number 81875266, E3NN3A244CB, Fits 6 cylinder engines, Steering control unit with "Roll Pin" type shaft, 146 cc, (Item #: 155280) $1089.01

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $5.70

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $48.40

Tie Rod End - Ford / New Holland models TW10, TW20, TW30, TW35 all with 4WD ZF Axles APL3054 or APL3052 use this tie rod end. It measures 5.625 inches from the center ball joint to the end of the tube. The tube is M36 x 1.5 RH Thread. This part replaces 81927245, X800210044000, ZF051303028, 3134240R91, 3134240R92 (Item #: 160199, Ref: 3134240R91) $152.00

Tie Rod End - Right Hand - For Ford tractor models TW10, TW20, TW30, 8000, 8700, 9700, Replaces Ford OEM number D8NN3289DB, Dimension A: 4.937", Dimension B: 1.000" - 16 Right Hand Thread, (Item #: 104662) $70.00

Tie Rod - Long - Used on TW10 (1979 - 1983) and TW20 (w/ long wheel base and adjustable axle), this Tie Rod measures 36.875 inches from the center of the ball joint to the end of the shaft. It is 1.187 inches in diameter and has 8 Cross Holes. Replaces D8NN3280DA (Item #: 104692) $123.00

Tie Rod Short - End, right hand offset, threaded, 8-3/4 inch to center of post. For tractor models 6710, 7710, 8700, 9700, TW10, TW15, TW20, TW25, TW35, TW5. (Item #: 104689, Ref: E1NN3289AA) $32.10

No
Picture
Tie Rod Tube - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number D8NN3B624BA, (Item #: 176471) $206.08

Wheels

$Ford TW20 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $66.00

Front Wheel Bearing Kit - For tractor models (5000, 7000 1972 and up with 8 x 16 wheel), 8000, 8600, 8700, 9000, 9600, 9700, (TW10, TW20, TW30 less heavy duty), (5610, 6610, 6710, 7610, 7710, 10/1989 and up heavy duty axle), 3400, 3550, 4400, 4500, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 535, 540, 540A, 540B, 545, 545A. NOTE: check bearing and cup numbers before ordering. Replaces 8L4221/312518, 25590-25520 for Inner Bearing and Cup, 312520/312548, 02474/02420 Outer Bearing and Cup, E4NN1190AA Seal. (Item #: 100657, Ref: S.67455) $46.60

Front Wheel Hub Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 3400 ('65-74), 3500, 3910, 4030, 4400, 4410, 4610, 5000 ('63-75 w/10"x16" tires), 5100, 5110, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000 ('63-75 w/10"x16" tires), 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8240, 8340, 8700, 9000, 9700, Compatible with Ford Construction and industrial models 250C, 260C (340), 340, 345, 420, 445, 450, 540, 545, 2030, 3550, Replaces Ford OEM number 249127, (Item #: 104571) $5.60

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $70.00

Rear Rim Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Replaces Ford OEM number E9NN1043BB11G, (Item #: 155120) $29.10

Rim Stop Screw - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9600, 9700, Compatible with Ford Construction and industrial models 256V, 276, Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 81811263, C0NN1058A, Screw for stop body, Use with power adjust rims PAR10X28, C5NN1050J, and C5NN1050H, Rear rim stop screw, (Item #: 151948) $5.10

Spindle Bushing - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D8NN3110AB, (Item #: 101139) $26.40

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 81811263, C0NN1058A. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Bearing Kit - Used on many Ford / New Holland models using 10.00 x 16 inch front wheels, this kit contains 25590 bearing cone, 25521 bearing cup, 02474 bearing cone, 02420 bearing cup, 412920 seal (not shown). Replaces EAPN1200B, EHPN1190A, EHPN1200B, 8A411. Used on some of the following models: 3400, 3500, 3550, 4120, 4140, 4400, 4410, 4500, 5100, 5110, 5190, 5200, 5610, 6000, 7100, 7200, 8000, 8200, 8240, 8340, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35 (Item #: 100657, Ref: WBKFD7) $46.60

Wheel Bearing Kit - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Kit includes an inner cone, inner cup, outer cone, outer cup, Seal not included, (Item #: 100658) $35.80

No
Picture
Wheel Hub - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830, Replaces Ford OEM number E1NN1104AA, 8 Bolt Front Hub, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104755) $194.00

Wheel Wedge, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 8870, 9000, 9700, Replaces Ford OEM nos D8NN1N035AA, 3 5/8" Axle, Non Threaded Half, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430127) $126.01

Wheel Wedge, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, 8530, 8630, 8700, 8730, 9700, Replaces Ford OEM nos D6NN1N035A, 3 3/8" Axle, Non-Threaded Half, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430189) $195.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $1.04

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.87

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.60

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.70

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $18.70

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Ford TW20 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Ford TW20 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford TW20 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Ford TW20 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Ford TW20 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Ford TW20 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $8.60

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $38.10

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.40

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.58

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.30

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.80

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $117.34

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $23.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $30.80

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $68.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $74.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $28.40

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $52.92

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $280.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $51.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $24.20

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $23.30

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.40

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $82.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $7.80

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $58.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $20.70

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $8.90

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.10

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $91.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $37.10

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $52.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $79.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $67.80

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $42.60

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $35.20

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $127.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $111.00