FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2141 Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Actuating Disc, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130 (s/n 307453-later), 2140 (s/n 430000-later), 2141, 2355N (s/n 713945-later), 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2955 (s/n 713797-767516), 3030, 3040 (s/n 430000-later), 3055, 3130, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM number L55004, O.D.: 12.17", I.D.: 8.67", For a new version of this item use Item #: 155488, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498776) $25.01

No
Picture
Brake Band - Also Replaces AL38213 and AT19833. Price is for 1 band. For construction models: 210C, 300, 301, 302, 310, 315, 401, 410, 415, 480, 510, 515. For tractor models: 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750. (Item #: At176621) $154.00

Brake Band with Lining - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040 (s/n 350000-later), 2120, 2130, 2140, 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2255, 2350, 2355, 2355N, 2440 (s/n 341000-later), 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415, 415B, 480C, 510B, 510C, 510D, 515, 515B, Replaces John Deere OEM number AT176621, AT19833, AT65876, AL38213, (Item #: 127158) $181.00

Clutch

Release Bearing - Release bearing for models 1040, 1040V, 1140, 1140F, 1140V, 1350, 1550, 1640, 1640F, 1641, 1641F, 1750, 1750V, 1840, 1840F, 1850, 1850F, 1850V, 1950, 1950F, 1950N, 2040, 2040F, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2250F, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2450F, 2541, 2550, 2555, 2640, 2650, 2650F, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651, 840, 940. 1.955 inch inside diameter, 2.250 inches tall. Replaces AL28860, AL37539, AL39541, AL39931, AL39541, VPG5062, 500013920, 500024811, 50002481/2. (Item #: 113755, Ref: AL39541) $77.00

Cooling System

Radiator - For (1640, 1840, 2040 ALL SN<429999) (1641, 1641f, 2040s, 2140, 2141, 2350, 2541, 2550, 2750, 2941). Radiator. Core Dimensions: 20.625" high, 18.875 high, 4 rows of tubes, 8 fins per inch. Replaces AL31237, AL37568 (Item #: 101748, Ref: AL37568) $390.00

Drive Train

Clutch Drive Gear, Used - For John Deere tractor models 2141, 2355N, 2541, 2555, 2651, 2755 (s/n 767516-earlier), 2855N (s/n 767516-earlier), 2941, 2951, 2955 (s/n 767516-earlier), 3055, 3141, 3351, 3641, 3651, Replaces John Deere OEM nos L59230, L36406, Teeth: 63, Outside Diameter: 9.25", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432571) $228.01

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Item #: 129237, Ref: 70202875) $15.60

Planetary Drive Shaft - 15 Tooth, 28 Spline, 12.500 inch long. For 1640, 2040, 2040S, 2140 SN# 370493->, 2141, 2250, 2355, 2355, 2450, 2541, 2550, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N tractors (Item #: L36202) $185.09

Planetary Gear - Used on John Deere models: 2140, 2141, 2541, 2750, 2941, 2950, 2955, 3040, 304H, 3050, 3055, 3140, 3141, 3150, 3155, 324H, 3255, 3350, 3351, 344H, 3640, 3640S, 3641, 3650, 3651, 710B, 710C, 710D. This Gear has 34 teeth. Replaces 81688C1, 83985466, L39994, L41120, ZP4472353463, (Item #: 114883, Ref: L39994) $111.00

Reverse Idler Gear, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2255, 2350, 2541, 2550, 2750, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L41604, Teeth: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431338) $53.01

Shift Fork, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150 (s/n 350000-later), 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255 (s/n 350000-later), 2350, 2351, 2355, 2355N, 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L33051, Replaces John Deere Casting nos L33051, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431252) $77.01

Engine Bearings

Bearing Housing, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2350, 2541, 2550, 2750, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L39841, L33286, Housing Only, No Bearings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431333) $365.01

Clutch Control Valve Gasket - For John Deere tractor models 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1950, 1950N, 2040 (s/n 350000-later), 2140, 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440 (s/n 341000-later), 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 301A (s/n 389637-later), 302 (s/n 389637-later), 401B (s/n 700790-later), 401D, Replaces John Deere OEM number L34345, All John Deere Construction and Industrial; With Independent PTO, (Item #: 161856) $4.90

Cylindrical Roller Bearing - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1850, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 490, 790, 792, Replaces John Deere OEM number L65031, JD10105, Inside Diameter: 1.260", Outer Ring Width: .669", Outside Diameter: 1.772", (Item #: 167707) $33.20

Shift Cover Manifold Gasket - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Replaces John Deere OEM number L61964, L33775, L33766, L42048, (Item #: 179562) $12.40

Engine Parts

Countershaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L41021, Teeth: 26/29/33/36, Width of the 36 tooth gear is 1.14", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431336) $195.01

Drive Shaft Gear, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos AL28709, Teeth: 24 and 39, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431002) $194.01

Extensions Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 379721-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 379721-later), 2350, 2550, 2750, 2940 (s/n 379721-later), 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L37590, Splines: 28, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431332) $310.01

Gear - Reverse Range, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3150, Replaces John Deere OEM nos L33025, Teeth: 26 and 28, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431248) $100.01

Shaft Collar Carrier, Used - For John Deere tractor models 2141, 2155, 2251, 2251N, 2351, 2355, 2355N, 2541, 2555, 2651, 2755, 2855N, 2941, 2951, 2955 (s/n 767516-earlier), 3055, 3141, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L41673, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432555) $132.01

Shift Collar Carrier, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516--earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, 6105M, 6105R, 6110R, 6115M, 6115R, 6120R, 6125M, 6125R, 6130R, 6140M, 6230 Premium, 6330 Premium, 6430 Premium, 7130 Premium, 7200, 7230 Premium, 7400, 7600, 7610 (s/n 089999-earlier), 7700, 7710 (s/n 089999-earlier), 7800, 7810 (s/n 089999-earlier), Compatible with John Deere Engine(s) 4045 (HL500/503), Replaces John Deere OEM number L33060, Teeth: 26, For a new version of this item use Item #: 161882, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431254) $42.01

Shift Collar - Pinion Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L33033, Teeth: 26, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431249) $32.01

Transmission Gear, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2255, 2350, 2541, 2550, 2750, 2941, 2950, 3055 (s/n 430000-later), 3150 (s/n 430000-later), 3155 (s/n 430000-later), 3255 (s/n 430000-later), 3351 (s/n 430000-later), 3651 (s/n 430000-later), Replaces John Deere OEM nos AL64426, AL28711, Teeth: 19, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449252) $299.01

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262) $6.30

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20

Fuel Tank - For John Deere tractor models 1640, 1641, 1641F, 1840, 2040, 2040S, 2140 (s/n 429999-earlier), 2141, 2350, 2541, 2550, 2941, Replaces John Deere OEM number AL38858, AL31037, AL37380, AL38853, AL35464, For fuel tank cap use 113550, (Item #: 122111) $430.00

No
Picture
Fuel Tank, Used - For John Deere tractor models 1640, 1641, 1641F, 1840, 2040, 2040S, 2140 (s/n 429999-earlier), 2141, 2350, 2541, 2550, 2941, Replaces John Deere OEM number AL38858, AL31037, AL37380, AL38853, AL35464, For a new version of this item use Item #: 122111, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422111) $257.01

Hitch / Drawbar

Draft Link Bushing - For John Deere tractor models 1640, 1641, 1641F, 1830, 1840, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2140, 2141, 2350, 2541, 2550, 2750, 2840, 2940, 2941, 2950, 3030, 3040, 3120, 3130, 3135, 3140, 3141, 3340, 3641, Replaces John Deere OEM number L26941, (Item #: 151028) $16.00

No
Picture
Draft Link Bushing, Used - For John Deere tractor models 1640, 1641, 1641F, 1830, 1840, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2140, 2141, 2350, 2541, 2550, 2750, 2840, 2940, 2941, 2950, 3030, 3040, 3120, 3130, 3135, 3140, 3141, 3340, 3641, Replaces John Deere OEM number L26941, For a new version of this item use Item #: 151028, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449556) $6.01

Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, and 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. Drawbar pin available as part# L32016. (Item #: 108511, Ref: L29020) $137.00

No
Picture
Load Control Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2541, 2651, 2840, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3055 (s/n 430000-later), 3130, 3140 (s/n 430000-later), 3141 (s/n 430000-later), 3255 (s/n 430000-later), 3351 (s/n 430000-later), 3641 (s/n 430000-later), 3651 (s/n 430000-later), Replaces John Deere OEM number L41819, For a new version of this item use Item #: 160351, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449530) $52.01

Load Sensing Bushing - For John Deere tractor models 1350, 1550, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2141, 2155, 2250, 2251, 2251N, 2350, 2351, 2355, 2355N, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3141, 3150, 3255, 3340, 3350, 3351, 3641, 3651, Replaces John Deere OEM number L41788, (Item #: 129288) $12.70

Lower Lift Yoke Plate - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2941, Replaces John Deere OEM number T21759, (Item #: 164883) $4.98

Rockshaft Cylinder Seal Kit, AL33017 - For John Deere tractor models 1640, 2040, 2040S, 2130 (s/n 257706-later), 2140, 2141, 2250, 2355, 2450, 2541, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N, 5083, 5083E, 5083EN, 5085E, 5085M, 5093, 5093E, 5093EN, 5101, 5101E, 5101EN, 5200 (Early), 5210 (Early), 5220, 5225, 5300 (Early), 5310 (Early), 5310N, 5320, 5320N, 5325, 5325N, 5400 (Early), 5400N, 5403, 5410 (Early), 5415, 5415H, 5420, 5420N, 5425, 5425N, 5500 (Early), 5500N, 5510 (Early), 5510N, 5520, 5520N, 5525, 5525N, 5600, 5603, 5605, 5615, 5625, 5700, 5705, 5715, 5715HC, 5725, Replaces John Deere OEM number AL33017, L34374, L34375, (Item #: 151992) $20.98

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Item #: 161847, Ref: AL40957) $22.30

Hydraulic System

Hydraulic Pump Seal Kit - Repairs AR103033 (23CMS) and AR103035 (11.3 CMS) Hydraulic Pumps. For JD 300, 301, 400, 401, 1020, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2941, 2951, 301A, 302, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3640, 3641, 3650, 3651, 4010, 7440, 7445, 830, 840, 930, 940, 1040. Industrials: 301, 400, 401. (Item #: 113893, Ref: S-AR98993) $24.60

Rockshaft Cover Gasket Kit - Rockshaft Cover Gasket Kit (Lift Cover) includes a metal gasket. John Deere TRACTOR: 1040, 1140, 1350, 1640 (serial number 430, 000 and up), 1641, 1641F, 1750, 1840, 1850, 1950, 2040 (serial number 430, 000 and up), 2040S (serial number 430, 000 and up), 2140 (serial number 430, 000 and up), 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (before serial number 767517), 3040 (serial number 430, 000 and up), 3050, 3055, 3140 (serial number 430, 000 and up), 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, 840, 940. Replaces AL57974 (Item #: 164140, Ref: AL57974) $59.00

Lights

Flasher Control Switch - Used on John Deere, Case, International and Allis Chalmers equipment, this Flasher Control Switch replaces OEM numbers 71362888, 87271837, 131209C91, 131066C91, AR64422 (Item #: 150918, Ref: AR64422) $82.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $25.90

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.00

Miscellaneous

Gearshift Lever Bushing - For John Deere tractor models 830 (3 Cyl.), 840, 920, 930, 940, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315CH, 315D, 350, 350B, 350C, 350D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 480, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, Replaces John Deere OEM number L4027T, (Item #: 161859) $6.90

Transmission End Cover, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3641, Replaces John Deere OEM nos L33055, Replaces John Deere Casting nos L33055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431253) $280.01

Oil System

No
Picture
Oil Filler Cap - Block - For John Deere tractor models 1640, 2040, 2040S, 2141, 2150, 2155, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3055, 3141, 3150, 3155, Replaces John Deere OEM number R80136, (Item #: 158211) $4.50

PTO / Driveline

John Deere, AL55075, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2440 (s/n 341000-later), 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM number AL55075, AL28723, For a new version of this item use Item #: 127044, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449892) $11.01

PTO Bearing Cap Gasket - For John Deere tractor models 840, 940 (& V), 1040 (& V), 1140 (& F, V), 1350, 1550, 1640 (& F), 1641, 1641F, 1750 (& V), 1840 (& F), 1850 (& F, V), 1850N, 1950 (& F), 1950N, 2040 (& F), 2040S, 2140, 2141, 2150, 2155, 2250 (& F), 2251, 2255, 2350, 2351, 2355, 2355N, 2450 (& F), 2541, 2550, 2555, 2650 (& F), 2650N, 2651, 2750, 2755, 2850, 2855N, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number A-L60548, (Item #: 179539) $23.50

PTO Clutch Drum, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440 (s/n 341000-later), 2541, 2550, 2555, 2640 (s/n 341000-later), 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L33312, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434751) $194.01

PTO Clutch Plate, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2440 (s/n 341000-later), 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM number L33125, For a new version of this item use Item #: 127060, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449891) $5.01

Steering

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $43.00

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.00

Planetary Pinion Gear Shaft - The spline count on this shaft is 14 and 21. This part is used on tractors with Mechanical Four Wheel Drive. Replaces John Deere part number L60106 (Item #: 171462, Ref: L60106) $76.01

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $351.00

Planetary Ring Gear - Used on John Deere models wit ZF APL735 front axles. This ring gear has 46 and 88 teeth. Models: 2140, 2141, 2251, 2351, 2541, 2651, 2750, 2755, 2850, 2941, 2951 (Item #: 179891, Ref: L60105) $475.01

Power Steering Cylinder - This Steering Cylinder measures 16.75 inches center-to-center, 18.75 inches overall length. Fits models 1641, 2140, 2141, 2350, 2355, 2541, 2550, 2555, 2750, 2755, 2940, 2941, 2950, 3140, 3141, 6110, 6120, 6200, 6210, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6420, 6430, 6500, 6510, 6520 (all 2WD with single acting cylinders, low axle). Verify OEM part number to ensure this is correct for your tractor. Replaces AL34542, AL36565, AL61553, RE17356, AL112919. (Item #: 108124, Ref: AL112919) $230.00

Power Steering Hand Pump - For John Deere tractor models 1640, 2040, 2040S, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number AL41291, (Item #: 164832) $255.00

No
Picture
Steering Motor - For John Deere tractor models 1641, 2040, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3141, 3351, 3641, Replaces John Deere OEM number AL41604, (Item #: 164463) $297.00

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $38.98

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $180.54

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.60

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.90

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.90

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 2141 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 2141 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$John Deere 2141 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 2141 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 2141 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 2141 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 2141 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$John Deere 2141 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.00

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00