FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2650N Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Band with Lining - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040 (s/n 350000-later), 2120, 2130, 2140, 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2255, 2350, 2355, 2355N, 2440 (s/n 341000-later), 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415, 415B, 480C, 510B, 510C, 510D, 515, 515B, Replaces John Deere OEM number AT176621, AT19833, AT65876, AL38213, (Item #: 127158) $181.00

Clutch

Clutch Control Valve Cover Gasket - Used on John Deere Tractors with independent PTOs, this Clutch Control Valve Cover Gasket replaces L33342, R234266 (Item #: 161808, Ref: R234266) $2.20

Clutch Kit - Our new single stage clutch kit contains: 12.875 inch diameter, 27 spline single, 1 3/4 inch hub, single stage pressure plate assembly, Flywheel Step - .850 inch; 12.875 inch diameter, ceramic, spring driven, 10 spline, 1 1/4 inch hub, new clutch disc; pilot bearing and clutch alignment tool. NOTE: This kit does NOT come with a release bearing. Additional $15.00 shipping due to weight. This clutch kit fits the following tractor models: 1641, 1641F, 2040S, 2140, 2355N, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3355, 3640, and 3640S. (Item #: 122744, Ref: R68485NKIT) $650.00

Clutch Release Bearing - Complete with bearing and carrier, this part is used on applications with three ports. It replaces AL120029, 500047620, 510002020, R39242, 510002010 Use on John Deere 2450 serial number below 649118 with Sound Guard Cab, 2650 serial number below 649118 with Sound Guard Cab, 2850 serial number below 649118 with Sound Guard Cab, 3050 serial number below 649118 with Sound Guard Cab, 3150, 3350 serial number below 649118 with Sound Guard Cab, 3650 below serial number 649118, 2250 serial number below 649118 with Sound Guard Cab, 2355, 2450, 2555, 2650 with Synchro-Trans - European Edition, 2650N Synchro-Trans - European Edition, 2755 (GPT), 2850 Synchro-Trans - European Edition, 2855N, 2955 below serial number 767516, 3050 European Edition, 3055 North American, 3150 North American, 3155 North American, 3255 North American, 3350, European Edition, 3640, 3640 European Edition, 3640S, 3640S European Edition, 3650 European Edition. (Item #: 121896, Ref: AL39242) $149.98

No
Picture
Cover Assembly, Clutch - LuK - For John Deere tractor models 840, 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850N, 1950N, 2040, 2150, 2155, 2250, 2255, 2350, 2450, 2650N, Replaces manufacturer number 132-0602-12, 132-0602-11, Fits 12-5/8" single clutch, Shaft: 1-1/2", Spline: 23, (Item #: 166009) $555.98

Pressure Plate - This cast iron pressure plate fits the following tractor models: 1641, 1641F, 2040S, 2140, 2355N, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3355, 3640, and 3640S. It measures 13 inches in diameter, and has 27 splines, with a spline diameter of 1.75 inches. It replaces part numbers: AL68486, AL68485, and AL60308. Additional $15.00 shipping due to weight. (Item #: 163897, Ref: AL68486) $616.00

Release Bearing - Release bearing for models 1040, 1040V, 1140, 1140F, 1140V, 1350, 1550, 1640, 1640F, 1641, 1641F, 1750, 1750V, 1840, 1840F, 1850, 1850F, 1850V, 1950, 1950F, 1950N, 2040, 2040F, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2250F, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2450F, 2541, 2550, 2555, 2640, 2650, 2650F, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651, 840, 940. 1.955 inch inside diameter, 2.250 inches tall. Replaces AL28860, AL37539, AL39541, AL39931, AL39541, VPG5062, 500013920, 500024811, 50002481/2. (Item #: 113755, Ref: AL39541) $77.00

Cooling System

Radiator - For 2250, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N ALL SN<669788. Radiator. Core Dim: 24.125" high, 18.875 wide, 4 rows of tubes (dense), 8 fins per inch. (Item #: 101751, Ref: AL56372) $452.00

Radiator - For tractor models 2250, 2450, 2650, 2650N, 2850, (2355, 2555, 2755, 2855N, all with SN# 669789 and up). (Item #: 101750, Ref: AL66774) $587.00

Thermostat Housing Gasket - Used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2255, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N, 3030, 3100, 3200, 3300, 3350, 3400, 830, 840, 930, 940, this gasket replaces John Deere part number T20215 (Item #: 155335, Ref: T20215) $1.80

Drive Train

Axle Bearing - Part 2 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 112468, Ref: S.07772) $43.00

Axle Drive Shaft - Part 3 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124721, Ref: S.07701) $95.00

Axle Gear - Part 1 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124631, Ref: S.07700) $116.08

Axle Ring Gear - Part 4 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124630, Ref: S.07702) $377.00

Axle Seal - Part 6 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: S.07773) $5.93

Pinion Gear, Planetary - 26 tooth, 2.243 inches wide. For tractor models: 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N. (Item #: 185473, Ref: T29444) $85.30

Planetary Drive Shaft - 15 Tooth, 28 Spline, 12.500 inch long. For 1640, 2040, 2040S, 2140 SN# 370493->, 2141, 2250, 2355, 2355, 2450, 2541, 2550, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N tractors (Item #: L36202) $185.09

PTO Shaft - 540 RPM - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, Replaces John Deere OEM number L39949, Length: 40", Spline: 6, 540 RPM, (Item #: 162348) $556.00

Electrical System

No
Picture
Alternator - Bosch Style - For John Deere tractor models 840, 940, 1030, 1040, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2040, 2040S, 2120, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3350, 3640, 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, (Item #: 176298) $201.00

Alternator - Bosch Style (12151) - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1850, 1850N, 1950, 2040, 2040S, 2140, 2250, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6100, 6200 (s/n 116316-earlier), 6300 (s/n 116316-earlier), 6400 (s/n 116316-earlier), 6500 (s/n 116316-earlier), 6506, 6600, 6605, 6800, 6900, Replaces John Deere OEM number TY6779, AR187623, AZ38462, AL60033, AL67176, AL78690, TY6778, TY6792, AL81437, Replaces Bosch manufacturer number 0-120-484-012, 0-120-484-002, 0-120-484-003, 0-120-484-016, 0-120-484-020, Replaces manufacturer number 11.201.989, 11.203.332, IA 0989, IA 1154, AAK4321, AAK5197, 9-513-160, 282-112, 220-348, 220-348A, Bosch Style, Voltage: 12, Rotation: Clockwise, Amperage: 95, Regulator: Internal, Without pulley, For Voltage Regulator use Item #: 123598, (Item #: 110799) $113.00

Starter - Bosch Style DD (17095), Remanufactured, Bosch, 0-001-367-075, TY25974 - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840 (s/n 429999-earlier), 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6010, 6100, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510L, 6510S, Compatible with John Deere Combine (s) 2054, 2056, 2254, Compatible with John Deere Engine (s) 3029, 3179 (D/T), 4039 (D/T), 4045 (D/T), Replaces John Deere OEM number TY25974, TY6780, AL110597, SE501427, AL41247, AL62690, Replaces Bosch manufacturer number 0-001-367-075, 0-001-362-316, 0-001-362-312, Replaces manufacturer number 17095, Bosch Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, Mounting Type: Flange, Mounting Holes: 2, For a New version of this sku use Item #: 109770, (Item #: 203191) $331.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings

Cylindrical Roller Bearing - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1850, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 490, 790, 792, Replaces John Deere OEM number L65031, JD10105, Inside Diameter: 1.260", Outer Ring Width: .669", Outside Diameter: 1.772", (Item #: 167707) $33.20

No
Picture
Oil Pump Drive Shaft Seal - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3340, 3350, 3640, 3650, Replaces John Deere OEM number AL28922, Outside Diameter: 1.770", Shaft Diameter: 1.259", Type: Single Lip, Width: .354", (Item #: 167705) $8.70

Rear Axle Gasket - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 415B, 480, 480A, 480B, 480C, 482C, 510B, 510C, 510D, 515B, Replaces John Deere OEM number L61922, R98915, T21419, (Item #: 158869) $11.30

Shift Cover Manifold Gasket - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Replaces John Deere OEM number L61964, L33775, L33766, L42048, (Item #: 179562) $12.40

No
Picture
Thrust Bearing Set - 0.030 - For John Deere tractor models 830, 930, 940, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840 (s/n 429999-earlier), 1850, 1850N, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040, 3130, 3140, 3150, 3155, 3340, 3350, 4040S, 4050, 4240S, 4250, 4450, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, Compatible with John Deere Combine (s) 1165, 1175, 4425, 4435, Compatible with John Deere Harvester (s) 7440, 7445, 9920, 9930, Compatible with John Deere Engine (s) 3179 (Repower and OEM), 4039 (Repower and OEM), 4045 (s/n 100000-499999), 4045 (DF092, s/n 100000-499999, Repower), 4045 (TF092, s/n 100000-499999, Repower), 4239, 6059 (s/n 100000-499999), 6059DF092 (Repower, s/n 100000-499999), 6068 (s/n 100000-499999), 6068 (TF092, Repower, s/n 100000-499999), 6359, 6359D, 6359T, Compatible with John Deere Hay Cutting (s) 2360, 3430, 3830, Replaces John Deere OEM number RE27366, AR81790, (Item #: 167246) $14.98

Engine Gaskets

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300X. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.40

Engine Parts

Balancer Shaft - Left Hand - For John Deere tractor models 2140, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 6400, 6400L, 6500, 6500L, Compatible with John Deere Construction and industrial models 310C (engine s/n 299999-earlier), 315C (engine s/n 299999-earlier), 340D, 344E (engine s/n 300000-later), 344G, 401C (engine s/n 299999-earlier), 410D, 440C, 440D (early), 444E (engine s/n 299999-earlier), 444G, 448D, 450E, 450G (engine s/n 299999-earlier), 455E, 455G (engine s/n 299999-earlier), 490, 490E, 510B, 510C (engine s/n 299999-earlier), 510D, 515B, 540B, 540D (engine s/n 299999-earlier), 540E (engine s/n 383839-earlier), 548D, 548E (engine s/n 383839-earlier), 550, 550A (engine s/n 299999-earlier), 550B (engine s/n 299999-earlier), 550G (engine s/n 299999-earlier), 555, 555A (engine s/n 299999-earlier), 555B (engine s/n 299999-earlier), 555G (engine s/n 299999-earlier), 590D (engine s/n 299999-earlier), 595, 595D (engine s/n 299999-earlier), 610B, 610C, 650G (engine s/n 299999-earlier), Compatible with John Deere Engine (s) 4045, 4045T, 4239A, 4239T, 4276 (diesel and turbo diesel), Compatible with John Deere Hay Cutting (s) 3830 (engine s/n 299999-earlier), Replaces John Deere OEM number AR69711, Replaces John Deere Casting number R54634, Bolt-on weight style, For left hand side, (Item #: 158783) $114.00

Balancer Shaft - Left Hand, Used - For John Deere tractor models 2140, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 6400, 6400L, 6500, 6500L, Compatible with John Deere Construction and industrial models 310C (engine s/n 299999-earlier), 315C (engine s/n 299999-earlier), 340D, 344E (engine s/n 300000-later), 344G, 401C (engine s/n 299999-earlier), 410D, 440C, 440D (early), 444E (engine s/n 299999-earlier), 444G, 448D, 450E, 450G (engine s/n 299999-earlier), 455E, 455G (engine s/n 299999-earlier), 490, 490E, 510B, 510C (engine s/n 299999-earlier), 510D, 515B, 540B, 540D (engine s/n 299999-earlier), 540E (engine s/n 383839-earlier), 548D, 548E (engine s/n 383839-earlier), 550, 550A (engine s/n 299999-earlier), 550B (engine s/n 299999-earlier), 550G (engine s/n 299999-earlier), 555, 555A (engine s/n 299999-earlier), 555B (engine s/n 299999-earlier), 555G (engine s/n 299999-earlier), 590D (engine s/n 299999-earlier), 595, 595D (engine s/n 299999-earlier), 610B, 610C, 650G (engine s/n 299999-earlier), Compatible with John Deere Engine(s) 4045, 4045T, 4239A, 4239T, 4276 (diesel and turbo diesel), Compatible with John Deere Hay Cutting(s) 3830 (engine s/n 299999-earlier), Replaces John Deere OEM number AR69711, T20133, Replaces Casting nos R54634, For a new version of this item use Item #: 158783, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449614) $66.01

Balancer Shaft - Right Hand - For John Deere tractor models 2140, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 6400, 6400L, 6500, 6500L, Compatible with John Deere Construction and industrial models 310C (engine s/n 299999-earlier), 315C (engine s/n 299999-earlier), 340D, 344E (engine s/n 300000-later), 344G, 401C (engine s/n 299999-earlier), 410D, 440C, 440D (early), 444E (engine s/n 299999-earlier), 444G, 448D, 450E, 450G (engine s/n 299999-earlier), 455E, 455G (engine s/n 299999-earlier), 490, 490E, 510B, 510C (engine s/n 299999-earlier), 510D, 515B, 540B, 540D (engine s/n 299999-earlier), 540E (engine s/n 383839-earlier), 548D, 548E (engine s/n 383839-earlier), 550, 550A (engine s/n 299999-earlier), 550B (engine s/n 299999-earlier), 550G (engine s/n 299999-earlier), 555, 555A (engine s/n 299999-earlier), 555B (engine s/n 299999-earlier), 555G (engine s/n 299999-earlier), 590D (engine s/n 299999-earlier), 595, 595D (engine s/n 299999-earlier), 610B, 610C, 650G (engine s/n 299999-earlier), Compatible with John Deere Engine (s) 4045, 4045T, 4239A, 4239T, 4276 (diesel and turbo diesel), Compatible with John Deere Hay Cutting (s) 3830 (engine s/n 299999-earlier), Replaces John Deere OEM number AR69710, Replaces John Deere Casting number R54634, Bolt-on weight style, For right hand side, (Item #: 158784) $139.00

Camshaft - No Drive Gear In 3rd Cylinder, Used - For John Deere tractor models 1640, 1830, 1840, 2020 (engine s/n 74999-earlier), 2030, 2040, 2040S, 2120 (engine s/n 74999-earlier), 2130, 2140, 2350, 2355, 2440, 2510 (engine s/n 157575-earlier), 2520 (engine s/n 157575-earlier), 2550, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 5500, 5500N, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, Compatible with John Deere Combine(s) 3300 (s/n 3000-earlier), 4400 (engine s/n 277615-earlier), Compatible with John Deere Harvester(s) 482, 499 (s/n 1200-earlier), Compatible with John Deere Construction and industrial models 70, 70D (engine s/n 299999-earlier), 190E, 210C (engine s/n 300000-later), 290D (engine s/n 300000-later), 300D, 310A, 310B, 310C (engine s/n 299999-earlier), 310D, 315C (engine s/n 299999-earlier), 315D, 340D, 344E (engine s/n 300000-later), 344G, 400 (s/n 104241-earlier), 400G (engine s/n 299999-earlier), 401, 401B, 401C, 401D, 410 (s/n 192000-later), 410B, 410C (engine s/n 299999-earlier), 410D, 415B, 440 (s/n 49999-earlier), 440A (s/n 20000-21152), 440B (s/n 181034-earlier), 440C, 440D (early), 444E (engine s/n 299999-earlier), 444G, 448D, 450 (s/n 102766-earlier), 450B (s/n 187208-earlier), 450C, 450D, 450E, 450G (engine s/n 300000-742459), 455D, 455E, 455G (engine s/n 300000-742459), 480 (s/n 104241-earlier), 480A (s/n 193099-earlier), 480B, 480C, 482C (engine s/n 300000-later), 490, 490E, 510B, 510C (engine s/n 299999-earlier), 510D, 515B, 540B, 540D (engine s/n 299999-earlier), 540E (engine s/n 383839-earlier), 548D, 548E (engine s/n 383839-earlier), 550, 550A (engine s/n 299999-earlier), 550B (engine s/n 299999-earlier), 550G (engine s/n 299999-earlier), 555, 555A (engine s/n 299999-earlier), 555B (engine s/n 299999-earlier), 555G (engine s/n 299999-earlier), 590D (engine s/n 299999-earlier), 595, 595D (engine s/n 299999-earlier), 610B, 610C, 650G (engine s/n 299999-earlier), Compatible with John Deere Engine(s) 180, 202, 219, 4039, 4039T, 4045, 4045T, 4219, 4219T, 4239, 4239A, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 880 (engine s/n 158257-earlier), 2270 (engine s/n 277615-earlier), 2280, 2360, 2420, 3430 (engine s/n 300000-later), 3830 (engine s/n 299999-earlier), Compatible with John Deere Sprayer(s) 6000 (engine s/n 302609-later), 6100, 6500, 6600, Replaces John Deere OEM number AT18049, R82820, AT20830, Replaces Casting nos R81518, T20013, T20014, Replaces OEM nos R79344, RE52974, RE14972, RE55901, For Diesel Engines Only, No Distributer Drive Gear, For a new version of this item use Item #: 152042, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442943) $82.01

Intake Valve - For John Deere tractor models 2140, 2355N, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Combine (s) 4420, 4425, 4435, 9400, Compatible with John Deere Harvester (s) 484, 7440, 9920, 9930, Compatible with John Deere Construction and industrial models 310C, 315C, 340D, 344E, 410C, 440C, 440D, 444D, 444E, 448D, 450D, 450E, 450G, 455D, 455E, 455G, 490, 490D, 493D, 495D, 510B, 510C, 515B, 540B, 540D, 544B, 544C, 544D, 544E, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570B, 590D, 595, 595D, 610B, 610C, 624E, 640, 640D, 648D, 650G, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 693D, 710B, 710C, 750, 750B, 755, 755A, 755B, Replaces John Deere OEM number R83071, R89219, (Item #: 167253) $2.98

Exhaust System

No
Picture
Exhaust Pipe - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s/n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3050, 3140 (s/n 430000-later), 3150, 3155, 3350, 3640, 3650, Replaces John Deere OEM number AL61138, Length: 50.39", Additional Handling and Oversize Fees Apply To This Item, (Item #: 171479) $216.00

Exhaust Pipe - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s/n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2150, 2155, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3050, 3055, 3140 (s/n 430000-later), 3150, 3155, 3350, 3640, 3650, Replaces John Deere OEM number AL61139, Length: 42.72", (Item #: 171481) $180.01

Muffler, Underhood - For tractor models (3400 with 4036T engine), (3300 with 4045D engine), (2040S, 2450 with 4239D engine), (2140, 2650, 2650N, 2850 with 4239T engine). (Item #: 113491, Ref: AL35753) $164.00

Fuel System / Air Intake

No
Picture
Precleaner Assembly - For 2140, 2650, 2650N, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640. Precleaner Assembly is 10.433" Bowl Diameter 3.15" Inlet Diameter 5.512" Body Height. (Item #: 112379, Ref: AZ24175) $36.00

Pre Cleaner Assembly - Assembly has a 3 inch pipe and a 10 inch diameter. For the following John Deere Models: 1032, 1042, 1052, 1155, 1157, 1158, 2040S, 2140, 2355, 2450, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3155, 3340, 3350, 3640, 3640S, 3650, 952. Replaces AZ24175. (Item #: 112379, Ref: C9NN9A660C) $36.00

Hitch / Drawbar

Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203) $64.00

Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016) $7.50

Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849) $7.30

No
Picture
Front Drawbar Pin Adapter, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number L31849, For a new version of this item use Item #: 155462, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436163) $4.01

Load Control Shaft - For John Deere tractor models 301, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 300B, 301A, 401D, Replaces John Deere OEM number L41787, (Item #: 155106) $85.00

Load Control Shaft - For John Deere tractor models 1640, 2040, 2040S, 2140, 2650, 2650N, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3255, Replaces John Deere OEM number L41819, (Item #: 160351) $93.00

Load Control Washer - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1850N, 2030, 2040, 2040S (s/n 429999-earlier), 2130, 2140, 2155, 2350, 2355, 2355N, 2550, 2555, 2640 (s/n 341000-later), 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number L41154, (Item #: 165796) $1.70

Load Sensing Bushing - For John Deere tractor models 1350, 1550, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2141, 2155, 2250, 2251, 2251N, 2350, 2351, 2355, 2355N, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3141, 3150, 3255, 3340, 3350, 3351, 3641, 3651, Replaces John Deere OEM number L41788, (Item #: 129288) $12.70

Lower Lift Yoke Plate - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2941, Replaces John Deere OEM number T21759, (Item #: 164883) $4.98

Rear Drawbar Support - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1640, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, Replaces John Deere OEM number T21677, T31725, (Item #: 155463) $78.00

Rockshaft Cylinder Seal Kit, AL33017 - For John Deere tractor models 1640, 2040, 2040S, 2130 (s/n 257706-later), 2140, 2141, 2250, 2355, 2450, 2541, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N, 5083, 5083E, 5083EN, 5085E, 5085M, 5093, 5093E, 5093EN, 5101, 5101E, 5101EN, 5200 (Early), 5210 (Early), 5220, 5225, 5300 (Early), 5310 (Early), 5310N, 5320, 5320N, 5325, 5325N, 5400 (Early), 5400N, 5403, 5410 (Early), 5415, 5415H, 5420, 5420N, 5425, 5425N, 5500 (Early), 5500N, 5510 (Early), 5510N, 5520, 5520N, 5525, 5525N, 5600, 5603, 5605, 5615, 5625, 5700, 5705, 5715, 5715HC, 5725, Replaces John Deere OEM number AL33017, L34374, L34375, (Item #: 151992) $17.98

Rockshaft Housing Retainer - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number T21615, (Item #: 161844) $7.10

Spring Clamp - For John Deere tractor models 830 (3 cyl.), 840, 930, 940, 1020 (s/n 183987-later), 1030, 1035, 1040, 1120 (s/n 183987-later), 1130, 1140, 1350, 1530, 1550, 1630, 1635, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020 (s/n 039087-later), 2030, 2035, 2040, 2040S, 2120 (s/n 039087-later), 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3135, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B (s/n 715671-later), 301A (s/n 715671-later), 401B, 401D, Replaces John Deere OEM number L26936, (Item #: 161830) $2.30

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Item #: 161847, Ref: AL40957) $22.30

Hydraulic System

Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432) $16.10

Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360) $3.80

No
Picture
Hydraulic Breakaway Coupler - For John Deere tractor models 1040, 1140, 1550, 1640, 1750, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4040S, 4050, 4055, 4240S, 4250, 4255, 4350, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, 8570, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Replaces John Deere OEM number RE18834, RE15585, RE14358, RE10908, (Item #: 187055) $93.00

Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822) $3.10

Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 1950N, 2040S, 2355N, 2650N. (Item #: 165242, Ref: AR94660) $1350.01

Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569) $15.20

Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202) $8.00

Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.785 inches long with a 0.877 inch diameter, keyed hole. It is used with coupling parts R78202, L34432 and L34569. It replaces original part number L34572 (Item #: 160350, Ref: L34572) $74.82

Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.370 inches long and has 14 splines. It replaces original part number L34573 (Item #: 112005, Ref: L34573) $91.00

Hydraulic Pump Packing - For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 7445 (s/n 275483, 4.219 engine), Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s/n 123113-earlier), 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s/n 123113-earlier), 844, 860, 860A, 862, Compatible with John Deere Engine (s) 6359T, 6466D, 6466T, Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483, 4.219 engine), Replaces John Deere OEM number R26149, (Item #: 113996) $2.20

Hydraulic Pump Repair Kit - For John Deere tractor models 930, 940, 1020, 1030, 1040, 1140, 1350, 1520, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2250, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, 401D, 840, Replaces John Deere OEM number AL35755, (Item #: 113896) $149.00

Hydraulic Quick Coupler Socket, Spool Type - For John Deere tractor models 1350, 1550, 1750, 1850, 1950, 1950N, 2150, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3050, 3055, 3155, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL172304, Overall Length: 2.453", Thread: Metric, Thread Size: .709", (Item #: 171459) $22.40

Miscellaneous

No
Picture
Cab Foam Main Headliner, Brindle Brown - For John Deere tractor models 2250, 2450, 2650, 2650N, 2850, 3050, 3350, 3640, 3650 (all using Console Comfort Cab), Color: Brindle Brown, Kits are computer cut to assure accuracy, Includes Cab Foam Headliner Escape Hatch, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112884) $423.00

Gearshift Lever Bushing - For John Deere tractor models 830 (3 Cyl.), 840, 920, 930, 940, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315CH, 315D, 350, 350B, 350C, 350D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 480, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, Replaces John Deere OEM number L4027T, (Item #: 161859) $6.90

No
Picture
Load Sensing Bushing, Used - For John Deere tractor models 1350 (s/n 651780-later), 1550 (s/n 651780-later), 1640, 1750 (s/n 651780-later), 1840, 1850 (s/n 651780-later), 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2350 (s/n 529512-later), 2355, 2355N, 2450, 2550 (s/n 529512-later), 2555, 2640, 2650, 2650N, 2750 (s/n 529512-later), 2755, 2840, 2850, 2855, 2855N, 2940, 2950 (s/n 531762-later), 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B, 410B, 410D, Replaces John Deere OEM number L41196, For a new version of this item use Item #: 166247, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452664) $8.01

Load Sensing Bushing with O-Ring - For John Deere tractor models 1350 (s/n 651780-later), 1550 (s/n 651780-later), 1640, 1750 (s/n 651780-later), 1840, 1850 (s/n 651780-later), 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2350 (s/n 529512-later), 2355, 2355N, 2450, 2550 (s/n 529512-later), 2555, 2640, 2650, 2650N, 2750 (s/n 529512-later), 2755, 2840, 2850, 2855, 2855N, 2940, 2950 (s/n 531762-later), 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B, 410B, 410D, Replaces John Deere OEM number L41196, (Item #: 166247) $15.00

No
Picture
SCV Operating Arm - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2650 (Synchro-Transmission, European Edition), 2650N (Synchro-Transmission, European Edition), 2750, 2755, 2850 (Synchro-Transmission, European Edition), 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R50012, (Item #: 115142) $25.90

Oil System

Oil Pump Tube - For John Deere tractor models 820 (s/n 031310 - later), 830, 920, 930, 940, 1020 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1030, 1040, 1120, 1130, 1140, 1350, 1520 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 1950N, 2020 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 2030, 2040, 2040S, 2120, 2140, 2150, 2155 (s/n 957545 - earlier), 2240, 2255, 2350, 2355 (s/n 957545 - earlier), 2355N (s/n 957545 - earlier), 2510 (Gas s/n 082858 - later, Diesel s/n 082721 - later), 2520, 2550, 2555 (s/n 957545 - earlier), 2650, 2650N, 2750, 2755 (s/n 957545 - earlier), 2840, 2850, 2855N (s/n 957545 - earlier), 2940, 2950, 2955 (s/n 957545 - earlier), 3030, 3050, 3055 (s/n 957545 - earlier), 3120, 3130, 3150, 3155 (s/n 957545 - earlier), 3255 (s/n 957545 - earlier), 3350, 3650, 4030, 5200 (s/n 106773 - earlier), 5300 (s/n 106773 - earlier), 5400 (s/n 106773 - earlier), Compatible with John Deere Construction and industrial models 210C, 300 (Gas s/n 23037 - later, Diesel s/n 23155 - later), 300B, 301A, 302, 310, 310A, 310B, 310C, 310D, 315D, 350B, 350C, 350D, 355D, 380, 400 (Gas s/n 23037 - later, Diesel s/n 23155 - later), 400G, 401, 401B, 401C, 401D, 415B, 450 (s/n 22565 - later), 450B, 450C, 450D, 455D, 480 (Gas s/n 23759 - later, Diesel s/n 22937 - later), 480A, 480B, 480C, 482C, 515B, Replaces John Deere OEM number T20050, (Item #: 158407) $12.60

Oil Pump Tube - For John Deere tractor models 820, 920, 1020, 1030, 1040, 1130, 1140, 1420, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3040, 3050, 3055, 3140, 3155, 3255, 3650, 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5500, 6200, 6200L, 6300, 6300L, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 301A, 302, 302A, 310, 310B, 310C, 310D, 315C, 350A, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 415B, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 482C, Replaces John Deere OEM number R113752, (Item #: 158408) $11.80

Oil Pump, Used - For John Deere tractor models 820, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040 (utility), 2040S, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030 (s/n 173209-later), 3040, 3050, 3055, 3100, 3120, 3130 (s/n 173209-later), 3140, 3150, 3155, 3255, 3350, 3640, 4030, 5105, 5200, 5205, 5210, 5220, 5300, 5400, 5410, 5500, 5600, 5700, 6100, 6200, 6300, 6500, Compatible with John Deere Combine(s) 2240, 3300, 4400, 4420, 4425, 4435, 9400 (engine s/n 337245-earlier), Compatible with John Deere Skid Steer Loader(s) 240, 8875, Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 7445 (s/n 4061-later), 9900, 9910, 9920, 9930 (s/n 2481-later), Compatible with John Deere Construction and industrial models 70, 300, 300B, 301, 301A, 302, 302A, 310, 350 (s/n 111711-later), 380, 400, 401, 401B, 401C, 401D, 410, 410B, 415B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455D, 480, 515B, 540 (s/n 163819-later), 544 (s/n 165890-later), 570, 570B, Compatible with John Deere Hay Cutting(s) 2270 (s/n 247999-earlier), 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6500, 6600, Replaces John Deere OEM number RE35685, Replaces Casting nos DD14760, R54615, R54614, R53382, Marked R53382, R54614, R54615, DD14760, For a new version of this item use Item #: 114022, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435645) $41.01

PTO / Driveline

PTO Bearing Cap Gasket - For John Deere tractor models 840, 940 (& V), 1040 (& V), 1140 (& F, V), 1350, 1550, 1640 (& F), 1641, 1641F, 1750 (& V), 1840 (& F), 1850 (& F, V), 1850N, 1950 (& F), 1950N, 2040 (& F), 2040S, 2140, 2141, 2150, 2155, 2250 (& F), 2251, 2255, 2350, 2351, 2355, 2355N, 2450 (& F), 2541, 2550, 2555, 2650 (& F), 2650N, 2651, 2750, 2755, 2850, 2855N, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number A-L60548, (Item #: 179539) $23.50

PTO Shaft, 1000 RPM - 9.781" long, 21 splines. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Item #: 113707, Ref: T30803) $273.00

PTO Shaft, 540 RPM - Does not include JD7557 bearing race. 9.203 inches long, 6 spline. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Item #: 111384, Ref: AT29707) $202.00

PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Sheet Metal / Body Parts

Fender Set - Right Hand and Left Hand - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 480, Replaces John Deere OEM number AL28584, AL28585, AT20777, AT20779, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender - Right Hand use Item #: 103961, Additional Handling and Oversize Fees Apply To This Item, (Item #: 140628) $245.00

Side Screen Knob - For tractor models 1550, (4050 from SN# 5511), 4050, 4055, 4250, 4255, 4450, 4455, 2355, 2555, 2755, 2855N, 2955, 3055, 3155, 3255, 2155, 2355N, 3050, 3350, 2650, 2650N, 2850, 2250, 2450, 1650, 1750, 1850, 1950, 1950N, 3650, 3150, 6300, 6500, 6600. (Item #: 179662, Ref: L63150) $8.90

Steering

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $43.00

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.00

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.30

Drag Link Assembly - This Drag Link Assembly is used on 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2650, 2650N, 2850, 2355, 2555, 2755, 2855N. Replaces OEM Part Numbers AL38638, AL82836 (Item #: 165952, Ref: AL38638) $73.00

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Item #: 124593, Ref: L60747) $13.30

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

King Pin - John Deere models 2140 (serial number 430000 and later), 2650, 2650N, 2750, 2755, 2850, use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335 and APL 735. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162) $103.87

Pivot Pin, Rear - 4.22" long, 1.49" O.D.. For tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N. (Item #: 172464, Ref: L57725) $51.00

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Item #: 124690, Ref: L53819) $2.40

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1199.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $116.08

No
Picture
Spider U-Joint Assembly - For John Deere tractor models 1550 (s/n 750789-later), 1550 (s/n 720000-750788), 1640 (s/n 038265-048738), 1750 (s/n 720000-750788), 1850 (s/n 720000-later), 1850N, 1950 (s/n 720000-later), 1950N, 2040 (s/n 038265-048738, 450000-later), 2040S (s/n 038265-048738, 450000-later), 2250, 2350 (s/n 038265-048738), 2355, 2450, 2550 (s/n 038265-048738), 2555, 2650, 2650N, 2755, 2850, Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316, (Item #: 176288) $88.00

Steering Release Rod, Used - For John Deere tractor models 1640 (with SG2 s/n 43000-later), 2040 (with SG2 s/n 43000-late), 2040S (with SG2 s/n 43000-later), 2140 (with SG2 s/n 43000-late), 2350 (with SGB), 2355 (with SGB), 2550 (with SGB), 2555 (with SGB), 2650 (with SGB), 2650N (with SGB), 2750 (with SGB), 2755 (with SGB), 2850, 2940, 2950 (with SGB), 2955 (with SGB), 3040 (with SGB s/n 43000-later), 3055, 3140 (with SGB s/n 43000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560 (4630), 4630, 4640, 4650, 4755, 4760, 4840 (4850), 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9920, 9930, 9935, 9940, 9960, 9965, 9970, 9976, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos AR54808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499865) $15.51

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.60

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.90

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.90

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 2650N Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 2650N Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 2650N Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 2650N Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 2650N Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 2650N Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 2650N Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$John Deere 2650N Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.00

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00