FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 310 Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

No
Picture
Brake Band - Also Replaces AL38213 and AT19833. Price is for 1 band. For construction models: 210C, 300, 301, 302, 310, 315, 401, 410, 415, 480, 510, 515. For tractor models: 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750. (Item #: At176621) $154.00

Service Brake Disc - For John Deere Construction and industrial models 210, 210K, 210LJ, 310, 310J, 310K, 310KEP, 310SJ, 310SK, 315, 325, 325J, 325SK, 410, 410J, 410K, 410KTC, Replaces John Deere OEM number AT339059, .224" Thick, 48 Tooth, O.D 9.15", I.D. 5.910", (Item #: 151116) $13.50

Service Brake Disc - For John Deere Construction and industrial models 210, 210K, 210LJ, 310, 310J, 310K, 310KEP, 310SJ, 310SKTC, 315, 325, 325J, 325SK, 410, 410J, 410K, 410KTC, Replaces John Deere OEM number AT339543, 20 Tooth, O.D.: 9.175", I.D.:2.620", .218" Thick, (Item #: 151858) $37.98

Clutch

Carrier, Clutch Throw Out Bearing - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 380, 400, 401, 401B, 401C, 410, 480, 480B. (Item #: 163426, Ref: AT20055) $102.00

Clutch Disc 10 Inch - This is 10 inch organic, spring loaded disc with a 20 spline, 1-5/16 inch hub. It is used on Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT21669, AT21665, RE33891, AL24059 (Item #: 166097, Ref: AL71088) $110.00

Clutch Kit, 10 Inch - Our clutch kit for tractors with reverser transmission includes: A new 10 inch, 3 spring, pressure plate assembly; a new, 10 inch, 20 spline, 1 5/16 inch hub, organic woven, heavy duty clutch disc; new release and pilot bearings. Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410). (Item #: 184281, Ref: TP-R60368K) $250.00

Pilot Bearing - Measures .596 ID, 1.378 OD. For tractor models 300, 301, 400, 401, 1020, 2030 early, 420, 430, 435, 310, 450, 480, 1010, 1020, 2010, 2030 early, 320 early, 330, 40, 850. Replaces CH19289, AL24903, AL28037, JD10107, JD8511, JD9464 (Item #: 108447, Ref: JD8511) $1.80

Pressure Plate Assembly, 10 Inch - Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT22064, AT60368, R22064 (Item #: 158074, Ref: AT22064) $206.00

Cooling System

Radiator - For John Deere Construction and industrial models 310, 315, Replaces John Deere OEM number AT186930, Core Height: 28", Core Width: 21", Depth: 2", Rows: 3, Fins Per Inch: 7 Flat Fin, Inlet: 2", Outlet: 2", (Item #: 119623) $777.00

Radiator - For 310, 310A, 310B, 401D. Radiator (Item #: 101741, Ref: AT32527) $523.00

Radiator - For John Deere Construction and industrial models 210, 310, 315, 410, Replaces John Deere OEM number AT428806, Made in the USA and manufactured to exact OEM specifications, Additional Handling and Oversize Fees Apply To This Item, (Item #: 156387) $1029.01

Radiator Hose, Lower - This lower radiator hose measures 1.875 inside diameter. For models tractor models 1010-D, 1020-D, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1630, (All early 1550, 1750, 1830, 2020-D, 2030-D, 2040U, 2120, 2130, 2150, early 2155, 2240, 2255, 2440, 2630, 2640, 301A, 820 3 cyl, 830 3 cyl, 840, 920, 930, 940, (Industrial - 300, 300B, 301, 302, 310, 380, 400, 401, 410, 480), (Skidder - 24, 440, 440A, 440B) (Item #: 115445, Ref: T22500) $10.20

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $8.50

Thermostat Housing Cover - Used on gas engines. For tractor models 1020, 1520, 1830, 2020, 2030, 210C, 2130, 2440, 2510, 2520, 300, 300B, 301, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410. (Item #: 159570, Ref: T20317) $16.20

Water Pump - For tractor models 2280, 2420, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 400, 401, 440, 440A, 440B, 480, 70, 70D, (1020, 1520, 1530, 2030, 2440, 830, 930 all with Diesel Engines), 2020 DSC, (2040, 2240, both with Diesel seial number under 349999). Water Pump with gasket. Replaces casting numbers: R51039, R55758, AR67452, AR55094. Note: Can use T23628 Pulley. Will need to remove the hub first. Can be used in place of AR85250, AR87420, AR97708, AR97708 and RE19944 in some applications. Replaces: AR52423, AR55094, AR62548, AR65260, AR87420, AT29619, DE13243. (Item #: 101902, Ref: RE19944) $110.00

Water Pump Repair Kit - The Water Pump Repair Kit is used to repair a RE19944 water pump. The RE19944 water pump is used on many John Deere pieces of equipment. Replaces RE37483, RE11345, RE62658 (Item #: 128473, Ref: RE11345) $40.70

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. (Item #: 164008, Ref: AR101549) $9.70

Water Pump with Pulley - Used on John Deere 1020, 1030, 1120, 1130, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035, 2035EF, 2120, 2130, 2135, 310, 4239D, 830, 920, 925, 930, 932, 935, 940, 942, 945 952, 70, 70D, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 380, 400, 401, 440, 440A, 440B, 480. This water pump has a single groove pulley. Comes with gaskets and fitting. Replaces John Deere part numbers AR55094, AT27018, AT29619, casting numbers R48997, R54051, R55758, R65880, R67188. Hardware is not included to plug oil cooler lines. (Item #: 150365) $164.00

Drive Train

Bevel Gear, Differential - 18 teeth. For tractor models JD300, JD301, JD310, JD380, JD400, JD401, JD480, 1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030, 1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C, 401D, 410B, 410C. (Item #: 172322, Ref: T29394) $40.98

Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 7/16 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. (Item #: JDDIFF001) $822.59

Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 1/2 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. This assembly contains R51500, T30253, L29227, L29226, T29394, T21430 (Item #: JDDIFF002) $822.60

Differential Housing - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1641F, (1640, 1840, 2040 SN# up to 410063), 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, (300B SN# 195279 and up), (302A SN# 194773 and up), 401B, 401C, 410, 820, 830, 920, 930, 940, JD310, JD380, JD400, JD401, JD480, JD480B. (Item #: 151867, Ref: T30253) $259.22

Differential Housing - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. Replaces R51500 (Item #: 154511, Ref: R51500) $297.08

Gear, 2nd and 6th - 36/20 teeth, 5.375" O.D.. For tractor models 300, 300B, 301, 302, 302A, 310, 380, 400, 410, 401, 401C, 480, 480C, 1020, 1030, 1040, 1120, 1130, 1140, 1350. (Item #: 172309, Ref: T21976) $187.00

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Item #: 129237, Ref: 70202875) $15.60

Pinion Gear, Planetary - 18 teeth, 1.759" wide. For tractor models 1020, 1120, 1130, 1140, (1350 SN# 627639 and up), 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C, 401D, 410, 480C, 482C, 820, 920, JD300, JD301, JD310, JD380, JD400, JD401, JD480. (Item #: 126896, Ref: T21547) $121.00

Planetary Drive Shaft, RH - 12 Tooth, 23 Spline, 6.940 inch long. For JD 1020, 1530, 2020, 2030, 2440, (310A, 410 All IND SN# <-371556), 820, 830, 930, 940, 300, 310, 400, 480 tractors (Item #: 126897, Ref: T28907) $231.71

Electrical System

Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Item #: 117621, Ref: SE501356) $164.00

Distributor Cap - This new Distributor cap is for 3 cylinder models with Prestolite Distributor #'s - IBT-4301B, IBT-4301C and IBT-4301D. Replaces AT21717 and 21A447. (Item #: 108147, Ref: AT21717) $26.40

Electronic Ignition Conversion Kit, 12 volt negative ground - Use on the following tractors: 1020 and 1520 with 3-cylinder engine sizes 135, 152, 164 using Prestolite distributor # IBT4301B, IBT4301C, IBT4301D. Also used on industrial 300, 300B, 301, 301A, 302, 302A, 310, 350, 350B, 380. Electronic ignition conversion kit by Pertronix. Replaces points and condenser with an electronic module. Used Only on tractors with 12 volt NEGATIVE ground systems. (Item #: 105087, Ref: 1531) $200.00

Light Switch, 12 Volt - 4 position, 5 terminals and fuse, .50" thread dia. For tractor models 1010, 1020, 1520, 2010, 2020, (2030 SN# up to 187300), 3010, (3020 SN# up to 067999), 4010, (4020 SN# up to 090999), 300, 301, (310 SN# up to 255718), 400, 401, (410 SN# up to 255718), (500 SN# up to 067999), (600 SN# 65000 to 90999), 760. (Item #: 125703, Ref: AR28401) $27.80

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $188.00

Starter - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $160.00

Starter Assembly - 12 volt, diesel, 10 teeth, gear drive reduction. For tractor models 310, 315G series. Replaces, RE504244, RE506105; Iskra IS0794. (Item #: 155226, Ref: TP-RE505744) $230.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.50

Engine Bearings

Main Bearing - .010 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27353, AT21110 (Item #: 123853) $11.20

Main Bearing - .020 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27360, AT21112 (Item #: 123854) $8.20

Main Bearing - .030 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27368, AT21114 (Item #: 123857) $4.98

Main Bearing - Standard - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers T23214, R515304, RE27352, AT21140 (Item #: 123852) $9.70

Thrust Bearing - 010 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers (Item #: 123859, Ref: AT21132) $29.40

Thrust Bearing - .020 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE527235, AT21134 (Item #: 123860) $16.98

Thrust Bearing - 030 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21136, RE527236 (Item #: 123861) $11.00

Thrust Bearing - Standard - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21139, T23215 (Item #: 123858) $41.00

Engine Gaskets

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516. (Item #: 176661, Ref: R97351) $11.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1020, 3300, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D, 350, 350B, 350C, 350D, 350D, 355D, 355D, 400G, 450, 450B. Replaces: AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.00

No
Picture
Overhaul Gasket Set without Seals - For tractor models 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355NCS, 2355NTSS, 301A, 302, 302A, 310, 350B, 350C, 350D, 355D, 5000, 5200, 5300, 5400, 5400N, 5500. All with either 3.164D, 3.1779T, or 3.179D engines. (Item #: 106930, Ref: RE37492) $93.00

Engine Parts

No
Picture
Clutch Disc - For John Deere Construction and industrial models 210LE, 310, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E, Replaces John Deere OEM number AT179473, O.D.: 4.71", I.D.: 3.11", Thickness: .063", Teeth: 40, (Item #: 128024) $2.70

Connecting Rod - Fits (300B SN <710723 Diesel), (301A SN <710721 Diesel), (302 Gas), (310 SN <189323), (350B Diesel), (350C Eng. SN 329334-590074 Diesel), (380 Diesel), (410 SN <189345 Diesel), (450B SN <187208), (480A SN <193099 Diesel), (540A SN <119500), (570 SN <275230), (570A SN <275230), 1520, (2520 Diesel), (300, 300A, 350A, 350B, 380, 1020, 1030, 820, 830, W/ 3.152 ENG), (302, 302A, 350B, 1420, 1520, 1530 SN <179601 3.164D ENG). Also used in 4.219 and 6.303 Engines. Verify Casting numbers R81410 Or T20007. (Item #: 121167, Ref: RE19733) $98.00

Connecting Rod - This Connecting Rod is used in John Deere 3.164D, 3.179D and 4.219 Diesel Engines. Replaces those marked R51727, R80034 (casting numbers). Replaces original part numbers AR55978, R51727, RE16495, RE21076 (Item #: 108583, Ref: RE16495) $62.00

Connecting Rod - Used on John Deere 4045D, 4045T, 6068T, 6068D PowerTech engines. This connecting rod is a direct replacement for rods marked R500000. It will also replace rods marked R123959. It is used with a 1.375 inch piston pin. Replaces John Deere part numbers RE60272, RE500002. (Item #: 123951) $61.00

Crankshaft - This crankshaft should be verified by the Casting # T23516 off your old crankshaft AND Snout Length of 1.37 inches. This casting number had 2 different snout lengths and is NOT interchangeable. It does not come with gear or bearings. For tractor models 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355, 300, 300A, 300B, 301A, 302, 302A, 310, 350A, 350B, 350C, 350D, 355D, 380, 5200, 5300, 5400, 5400N, 5500, 820, 830. Please Verify Length Of Snout Before Ordering, standard short snout (1.370"). (Item #: 102102, Ref: AT18031) $517.00

Crankshaft Pulley - For JD400, 1830, 2030, 2130, (2440 and 2640 with SN# above 341000). Crankshaft Pulley replaces R59312, R47412, T25365. 1.5" I.D. 6 hole.R59312 (Item #: 157741, Ref: R80808) $100.00

Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623) $7.60

Exhaust System

Manifold Gasket Set - This Gasket Set is used with T20249 Manifold. It replaces part numbers R90658, T20006 (Item #: 101603, Ref: R0911G) $12.70

Manifold, Vertical Exhaust - This Diesel Manifold is used on 1830 (AG), 2011, 2020, 2030, 2035 (SPAIN), 2120, 2130, 2135, 2440, 2510, 2520, 2630, 2640, 401A, 401B, 401C, 480A, Forklift: 480B, Industrial: 310, 400, 401, 410, 480; models 4 cylinder 202, 219 or 276 cubic inch diesel engines with vertical exhaust. Does Not come with gasket. Gasket set available Part Number R0911G. (Item #: 101602, Ref: T20249) $103.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262) $6.30

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $300.00

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Lift Transfer Pump - Also replaces AR52159, RE42211. For tractor models 290D, 300, 300A, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 34, 3420, 344E, 344G, 350, 2155, RE27667 (Item #: 112524, Ref: TP-RE42211B) $26.50

Fuel Sending Unit - Fuel Sending Unit. 30 ohms reads full. For tractor models 1020, 1520, 1530, 2020, 2030, (2440, 2640 SN# up to 340999), 2630, 300B, 301A, 302, 302A, 310A, 310B, 401B, 401C, JD300, JD301, JD310, JD380, JD400, JD401, JD410, JD480, JD480A, JD480B. (Item #: 119724, Ref: AT20912) $70.00

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Item #: 172673, Ref: AT20911) $8.80

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $15.00

Hitch / Drawbar

Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Item #: 162626, Ref: AR55695) $10.20

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min / Max Length: 21-1/2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Item #: 121432, Ref: AR44554) $79.00

Sway Block Bracket, Left Hand - This Left Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20168 (Item #: 111974, Ref: AT20168) $44.20

Sway Block Bracket, Right Hand - This Right Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20167 (Item #: 111975, Ref: AT20167) $40.40

Sway Block, LH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108953, Ref: T30277) $44.00

Sway Block, RH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108949, Ref: T30276) $48.22

Hydraulic System

Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362) $14.30

Hydraulic Pump, Remanufactured - For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A refundable core charge OF $300.00 will be added to your order. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Item #: 200408, Ref: AR56160-R) $1223.01

Hydraulic Seal Kit - Angle Cylinder - For John Deere Construction and industrial models 310, 450, 544, 750, 850, Replaces John Deere OEM number AH212088, (Item #: 152919) $14.60

No
Picture
Hydraulic Seal Kit - Blade Lift Cylinder - For John Deere Construction and industrial models 310, 410, 450, 510, 550, 650, 710, 710D, Replaces John Deere OEM number RE37003, Bore: 80 MM, (Item #: 152988) $12.40

Hydraulic Seal Kit - Boom Bucket Cylinder - For John Deere Construction and industrial models TC44, 210, 310, 410, 444, 444H, 650, 710, 750, 850, Replaces John Deere OEM number AH212101, (Item #: 152949) $61.00

Hydraulic Seal Kit - Boom Bucket Cylinder - For John Deere Construction and industrial models TC54, 310, 544, 710, Replaces John Deere OEM number AH149845, (Item #: 153127) $79.00

$John Deere 310 Hydraulic Seal Kit - Boom\Crowd Cylinder$
Hydraulic Seal Kit - Boom/Crowd Cylinder - For John Deere Construction and industrial models 310, 410, 455, 710, 710D, 750, 850, Replaces John Deere OEM number RE31716, AH137687, (Item #: 153363) $35.10

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 310, 350, 410, 450, 500, 544, 550, 555, 640, 644, 646, 655, 693, 740, 743, 760, Replaces John Deere OEM number AR105355, (Item #: 152895) $80.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 310, 315, 524, 544, Replaces John Deere OEM number AH149847, (Item #: 153253) $82.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 310, 444, 444H, 700, 850, Replaces John Deere OEM number AH149814, (Item #: 153684) $49.80

No
Picture
Hydraulic Seal Kit - Boom Lift Cylinder - For John Deere Construction and industrial model 310, Replaces John Deere OEM number AR105403, Rod: 1-3/4", Bore: 2-3/4", (Item #: 153272) $42.30

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 310, 310A, 310B, 350, 350B, 350C, 350D, 355D, 400, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 455E, 500A, 500C, 544, 544B, 550, 550A, 550B, 555, 555A, 555B, 644, Replaces John Deere OEM number RE18757, (Item #: 153011) $84.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 310, 544, 710, 710D, Replaces John Deere OEM number AH148823, Rod: 32 MM, (Item #: 153074) $25.50

No
Picture
Hydraulic Seal Kit - Lift Cylinder - For John Deere Construction and industrial models 310, 310C, 310D, 444J, 650G, 710C, 710D, 750B, Replaces John Deere OEM number AH149844, AH148164, (Item #: 153252) $54.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 302, 310, 350, 400, 401, 410, 440, 444, 450, 455, 500, 544, 550, 555, 644, 670, 770, Replaces John Deere OEM number RE18754, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152932) $61.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 310, 350, 355, 400, 410, 440, 440C, 444, 444D, 450, 500, 540, 544, 646, Replaces John Deere OEM number AR105387, (Item #: 152999) $57.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial model 310, Replaces John Deere OEM number AR96518, (Item #: 153020) $35.98

No
Picture
Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 310, 410, 500, Replaces John Deere OEM number RE12912, Rod: 1-3/4", Bore: 3-1/2", (Item #: 153063) $68.00

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 210, 310, 315, 410, 450, 550, 644, 650, 724, Replaces John Deere OEM number AH212091, Bore: 80 MM, (Item #: 152920) $38.20

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310 (s/n 237998-earlier), 401, 480, Replaces John Deere OEM number RE18749, (Item #: 152931) $19.30

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 644, Replaces John Deere OEM number AHC11572, Rod: 45 MM, (Item #: 152968) $47.10

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number RE21875, (Item #: 152987) $39.90

No
Picture
Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 210, 310, 450, 544, 710, 710D, Replaces John Deere OEM number RE20428, Bore: 70 MM, (Item #: 153065) $29.50

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number AT108329, (Item #: 153087) $49.10

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number AH137789, (Item #: 153125) $6.20

No
Picture
Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number RE33803, Bore: 50 MM, (Item #: 153175) $21.00

No
Picture
Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial model 310, Replaces John Deere OEM number AR96527, (Item #: 153148) $56.17

Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial models 310, 410, Replaces John Deere OEM number AHC11573, Rod: 50 MM, (Item #: 153267) $93.00

Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 310, 410, 450, 550, 700, 750, 850, Replaces John Deere OEM number AH212097, AH149812, (Item #: 153179) $11.98

Rockshaft Cover Gasket - This Rockshaft Cover Gasket (Lift Cover Gasket) Fits John Deere Tractor (s) 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1040, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040 (s/n 349999-earlier), 2040S, 2120, 2130, 2140, 2240 (s/n 349999-earlier), 2440, 2630, 2640. Construction and Industrial: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C. Replaces L41551, L34401, T21641 (Item #: 161832, Ref: T21641) $13.90

Lights

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.10

Oil System

Oil Pump - For 1020, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2270, 2280, 2320, 2350, 2355, 2420, 2440, 2510, 2520, 2730, 2750, 2850, 2940, 300, 300A, 300B, 301, 301A, 302, 302A, 310. Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Item #: 114022, Ref: RE35685) $69.00

Steering

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669) $12.00

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170) $9.20

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $63.00

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Item #: 113859, Ref: R34348) $71.00

Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Item #: 112629, Ref: L29199) $242.98

Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust/Const, 301 Indust/Const, 310 Indust/Const, 400 Indust/Const, 401 Indust/Const, 820, 830 It replaces original part number T25324 (Item #: 162164, Ref: T25324) $90.00

$John Deere 310 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 9.313", B= 1.747", C= 1.795", D= 1.312". For tractor models (310, 310A SN# 237998 and up), 310B, (401D, 480C SN# up to 700147). The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 104773, Ref: AT76758) $663.00

$John Deere 310 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 10.125", B= 1.750", C= 1.795", D= 1.312". For tractor models (300 SN# 136912 and up), 300B, 302, 302A, (310 SN# up to 237997), (400 SN# 136912 and up), 401, 401B, 401C, (480 SN# 136912 and up), 480A, 480B, (2640 SN# 341000 and up with straight non adjustable axle), 301A. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 104772, Ref: AT33636) $548.00

Spindle Thrust Washer - This Spindle Thrust Washer measures 1 3/4 inches inside diameter, 3 inches outside diameter. Two are used per spindle, 4 per tractor. Sold individually. (Item #: 109830, Ref: R49838) $4.40

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $9.90

Steering Arm, LH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104947, Ref: T21520) $252.00

Steering Arm, LH - For tractor models 310, (310A up to SN# 369742), 310B up to SN# 700147. (Item #: 104943, Ref: T77737) $491.00

Steering Arm, RH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104946, Ref: T21519) $263.00

Steering Arm, RH - For tractor models 310, (310A up to SN# 369742), 310B up to SN# 700147. (Item #: 104944, Ref: T77736) $389.00

Tie Rod Assembly - For JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with Fixed Front Axles. Tie Rod Assembly (Item #: 104861, Ref: AT19823) $108.04

Tie Rod Tube - 14.44 inches long, .875 inch left hand/right hand thread. For tractor models (JD380, JD480A, JD480B all with fixed axles), (JD300, JD400, JD480, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with fixed front axles), (JD310 with fixed front axle serial number up to 237997), (JD401 all with fixed front axle standard with JD401A loader). (Item #: 104822, Ref: T22948) $60.00

Wheels

Wheel Bearing Kit - For 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 300, 301A, 302A, 3040, 310B, 3140, 3230, 400, 401, 4030, 4230, 440, 480A, 480B, 62140, (3150, 3350 all standard duty), 300B 310A after SN# 237998, 2855 with swept back, 310 with SN# below 237997, 3130 with SN# above 186270. Wheel Bearing Kit for 1 wheel. Kit contains:25590 (Cone), 25520 (Cup), M88048 (Cone), M88010 (Cup), 23342 (Seal), R26632 (Seal Retainer). (Item #: 102230, Ref: WBKJD7) $46.00

Wheel Bolt - This wheel bolt fits the following John Deere tractor models using the R49839 and R47076 hubs: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, and 4240. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: AA4173R and AT11920. (Item #: 108605, Ref: WB916) $2.30

Wheel Bolt - This wheel bolt fits the following Massey Ferguson tractor models using the R49839 and R47076 hubs: 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number: AA4173R and AT11920. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub - This wheel hub fits the following John Deere tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1520, and 1640. Replaces the part number T21545. Uses wheel bolt WB916 and hub cap A1555R. (Item #: 102234, Ref: T21545) $67.87

Wheel Hub - 8 Bolt For 210C, 210LE, 2955, 300D, 3050, 3055, 310, 310A, 310B 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315CH, 315D, 315SE, 315SG, 3255, 3350, 401D, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 480C Forklift, 482C Forklift, 485E Forklift, 486E Forklift, 488E Forklift, 6010, 6020, 6100, 6100D, 6110, 6110D, 6110E, 6110L, 6115D, 6120, 6120L, 6130, 6140J, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6225, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6415, 6415 Classic, 6420, 6420L, 6425, 6430, 6430 Premium, 6500, 6500 Sprayer, 6500L, 6505, 6510, 6510L, 6510S, 6515, 6520L, 6525, 6530, 6534, 6600 Sprayer, 6603, 6605, 6610, 6615, 6630, 6700 Sprayer, 6715, 7130, 7230, 7405, 7445, 7500, 9920 Cotton Picker, 9930 Cotton Picker, SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520 Replaces John Deere R49841 (Item #: 102240, Ref: R0267) $94.00

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref: A1555R) $10.80

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.60

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.40

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.30

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.30

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$John Deere 310 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere 310 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 310 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 310 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere 310 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 310 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 310 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere 310 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $51.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00