FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 3650 Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Actuating Disc - For John Deere tractor models 2951, 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3351, 3650, 3651, Replaces John Deere OEM number L65164, L60889, L63946, Inside Diameter: 8.66", Outside Diameter: 12.12", Width: 1.89", (Item #: 163743) $272.00

Switch - Brake, AL67715, AL27809 - For John Deere tractor models 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 2030, 2040, 2120, 2130, 2140, 2250, 2450, 2650, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650, 4040, 4040S, Replaces John Deere OEM number AL67715, AL27809, (Item #: 162292) $23.60

Clutch

No
Picture
Clutch Alignment Tool - 1-1/4" 10 spline, 1-3/4" 27 spline, .59" pilot. For tractor models 2130, 2040, 2040S, 2140, 2940, 3040, 3140, 3640, 2150, 2550, 2650, 2750, 2950, 3050, 3150, 3350, 3650, 2155, 2555, 2755, 2855, 2955, 3055, 3255. (Item #: 121933, Ref: S.70917) $21.80

Clutch Control Valve Cover Gasket - Used on John Deere Tractors with independent PTOs, this Clutch Control Valve Cover Gasket replaces L33342, R234266 (Item #: 161808, Ref: R234266) $2.20

Clutch Disc - This spring type clutch disc fits the following tractor models: 3055, 3155, 3255, and 3650. This disc measures 12.875 inches in diameter and has 10 splines with a spline diameter of 1.25 inches. Replaces: AL68023 and AL62237. (Item #: 166167, Ref: AL68023) $322.98

Clutch Disc, Remanufactured, AL62237 - For John Deere tractor models 3055, 3155, 3255, 3650, Replaces John Deere OEM number AL62237, AL68023, AL70273, Clutch Size: 12-7/8", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 205773) $204.75

Clutch Release Bearing - Complete with bearing and carrier, this part is used on applications with three ports. It replaces AL120029, 500047620, 510002020, R39242, 510002010 Use on John Deere 2450 serial number below 649118 with Sound Guard Cab, 2650 serial number below 649118 with Sound Guard Cab, 2850 serial number below 649118 with Sound Guard Cab, 3050 serial number below 649118 with Sound Guard Cab, 3150, 3350 serial number below 649118 with Sound Guard Cab, 3650 below serial number 649118, 2250 serial number below 649118 with Sound Guard Cab, 2355, 2450, 2555, 2650 with Synchro-Trans - European Edition, 2650N Synchro-Trans - European Edition, 2755 (GPT), 2850 Synchro-Trans - European Edition, 2855N, 2955 below serial number 767516, 3050 European Edition, 3055 North American, 3150 North American, 3155 North American, 3255 North American, 3350, European Edition, 3640, 3640 European Edition, 3640S, 3640S European Edition, 3650 European Edition. (Item #: 121896, Ref: AL39242) $149.98

No
Picture
Clutch Release Throwout Bearing Carrier, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3150, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL39541, For a new version of this item use Item #: 170550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449538) $39.00

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Item #: 108447, Ref: AL10107) $1.80

Cooling System

Radiator - For tractor models 3050, 3055, 3155, 3255, 3350, 3650, 2955 without cab SN# above 660813 or with cab SN# above 664560. (Item #: 101753, Ref: AL66766) $494.00

Rubber Radiator Mounting Strap - For John Deere tractor models 2940, 2950, 2955, 3010, 3020, 3040, 3140, 3150, 3155, 3255, 3640, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 6030, 7020, 7520, 8560, 8570, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 690, 690A, 760, Replaces John Deere OEM number R26413, (Item #: 156255) $1.70

Thermostat - 180 degree. For tractor models 2955, 3030, 3040, 3050, 3055, (3130 SN# 255170 and up), 3140, 3155, 3255, 3350, 3640, 3650, 4040, 4040S, 4240, 4240S, 4440, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900, 7600, 7700, 7800, 8100, 8200, 8300, 8400. (Item #: 109418, Ref: AR48675) $10.00

Viscous Fan Clutch Assembly - For John Deere tractor models 3155, 3255, 3650, 6200 (s/n 125189-earlier), 6300 (s/n 125189-earlier), 6400 (s/n 125189-earlier), Replaces John Deere OEM number AL69178, RE29482, AL66912, (Item #: 156788) $351.00

Water Pump - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. RE31600-R, R31600 Casting#s R99665, R70612, R90783 (Item #: 113446, Ref: RE31600) $237.00

Water Pump Repair Kit - This Water Pump Repair Kit is use on water pumps with casting numbers: R55971, R56813, R70612, R78287, R90783, R90784, R97564, R99665, R104648, R120869. It replaces RE70143, RE62660, RE11348. (Item #: 167446, Ref: RE70143) $103.00

Drive Train

Differential Gear Thrust Washer - When replacing L29227 differential spider gear, it is advised that these washers also get replaced. Four are used, sold individually. Used on John Deere 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2130, 2140, 2150, 2250, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Replaces John Deere part number L31793 (Item #: 161853, Ref: L31793) $27.10

Differential Pinion Gear - Measuring 3 7/8 inches outside diameter, 1 11/16 inches inside diameter with 28 splines, 1 3/16 inches thick with 18 external teeth. This part replaces John Deere part numbers L28376, L158220 (Item #: 173236, Ref: L28376) $110.32

Planetary Gear - Used on John Deere models: 2140, 2141, 2541, 2750, 2941, 2950, 2955, 3040, 304H, 3050, 3055, 3140, 3141, 3150, 3155, 324H, 3255, 3350, 3351, 344H, 3640, 3640S, 3641, 3650, 3651, 710B, 710C, 710D. This Gear has 34 teeth. Replaces 81688C1, 83985466, L39994, L41120, ZP4472353463, (Item #: 114883, Ref: L39994) $111.00

PTO Open Single Row Ball Bearing - For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 500, 600, Replaces John Deere OEM number JD9320, I.D.: 2.559", O.D.: 4.724", Width: .906", (Item #: 121743) $21.10

PTO Shaft - For John Deere tractor models 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4350, Replaces John Deere OEM number T28672, 1000 RPM, 21 Spline, (Item #: 113971) $133.00

PTO Shaft less Bearing - For John Deere tractor models 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4055, 4255, 4350, 4555, Replaces John Deere OEM number R41756, R38233, Length: 10.687", 540 RPM, Spline: 6, Bearing race JD7557 not included, (Item #: 121438) $106.00

Electrical System

Alternator - 12 volt, 95 amp. For tractor models (9400 1989-93 with 466/359 dsl), 9410, 9450, (9500 1989-93 with 466 dsl), 9510, 9550, 9550SH, (9600, 9650 1989-93 with 466 dsl), 9610, (9650CTS, 9650STS, 9750STS, 9780CTS, 9860STS, (CTS 1992-94), CTSII, (7450 1995-97 with 359 dsl), (9930 1987-93 with 359 dsl), (9960 1987-93 with 466 dsl), (9965 1993 on with 466 dsl), 1550, 1750, 1850, 1950, 2250, (2355 1987-92), 2450, (2555, 2755 1987-92 with 239 dsl), 2650, 2850, (2955, 3155 1987-92 with 359 dsl), 3050, (3055 1992 with 359 dsl), 3150, (3255 1992 with 359 dsl), 3350, 3640, 3650, (6100, 6200, 6300, 6400, 6500 1993 on with 239 dsl), 6506, 6600, 6605, 6800, 6900, (3430, 3830, 3930 1985-92 with Bosch Alt.). Replaces 0120484011, 0120484003, AL78690, AL81437, RE78690, SE501342, SE501387, TY24485, TY6750, TY6779, TY6792. (Item #: 112390, Ref: ABO0107) $120.00

No
Picture
Alternator - Bosch Style - For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 940, 1040, 1140, 1550, 1750, 1850, 1850N, 1950, 1950N, 2040S, 2140, 2250, 2355, 2450, 2555, 2650, 2755, 2850, 2955, 3040, 3050, 3055, 3140, 3155, 3255, 3350, 3640, 3650, 6100, 6200, 6300, 6400, 6500, 6506, 6600, 6800, 6900, Replaces John Deere OEM number AL81437, Voltage: 12, (Item #: 176301) $122.45

Alternator - Bosch Style (12151) - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1850, 1850N, 1950, 2040, 2040S, 2140, 2250, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6100, 6200 (s/n 116316-earlier), 6300 (s/n 116316-earlier), 6400 (s/n 116316-earlier), 6500 (s/n 116316-earlier), 6506, 6600, 6605, 6800, 6900, Replaces John Deere OEM number TY6779, AR187623, AZ38462, AL60033, AL67176, AL78690, TY6778, TY6792, AL81437, Replaces Bosch manufacturer number 0-120-484-012, 0-120-484-002, 0-120-484-003, 0-120-484-016, 0-120-484-020, Replaces manufacturer number 11.201.989, 11.203.332, IA 0989, IA 1154, AAK4321, AAK5197, 9-513-160, 282-112, 220-348, 220-348A, Bosch Style, Voltage: 12, Rotation: Clockwise, Amperage: 95, Regulator: Internal, Without pulley, For Voltage Regulator use Item #: 123598, (Item #: 110799) $113.00

Glow Plug - For John Deere tractor models 240, 1350, 1550, 1750, 1850, 1950, 2155, 2250, 2350, 2355, 2450, 2550, 2650, 2750, 2755, 2850, 2955, 3050, 3055, 3100, 3110, 3150, 3155, 3200, 3210, 3255, 3300, 3310, 3350, 3400, 3410, 3650, 5315, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900, Replaces John Deere OEM number RE502079, Replaces Bosch manufacturer number 0-250-102-002, 0-102-024-405, Overall Length: 95mm, Thread: 7/8 “ (22.2mm) – 24 UNF, Element: Spring, (Item #: 129231) $17.80

Ignition Switch - This is a 12 volt, 20 amp, 4 position ignition switch used on multiple John Deere models. It has a 1.024" thread diameter. Replaces original part number AL35864. (Item #: 170186, Ref: AL35864) $29.40

Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models (3150 1985-87 with 6-359 dsl), (3150 built in Spain), (3155 1987-92 with 6-359 dsl), (3340 SN# 125745 and up), 3350, 3640, 3650, 5620, 6010, (6100 from 1993 and up), 6110, 6110L, (6200, 6200L, 6300, 6300L, from 1993 and up), 6210, 6210L, 6310, 6310L, 6310S, (6400 from 1993 and up with 4-276 dsl), (6400L from 1993 and up), 6400SP, 6405, 6410, 6410L, 6410S, (6500 from 1993 and up), 6500L, 6510L. Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044) $140.00

Starter - Bosch Style DD (17095), Remanufactured, Bosch, 0-001-367-075, TY25974 - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840 (s/n 429999-earlier), 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6010, 6100, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510L, 6510S, Compatible with John Deere Combine (s) 2054, 2056, 2254, Compatible with John Deere Engine (s) 3029, 3179 (D/T), 4039 (D/T), 4045 (D/T), Replaces John Deere OEM number TY25974, TY6780, AL110597, SE501427, AL41247, AL62690, Replaces Bosch manufacturer number 0-001-367-075, 0-001-362-316, 0-001-362-312, Replaces manufacturer number 17095, Bosch Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, Mounting Type: Flange, Mounting Holes: 2, For a New version of this sku use Item #: 109770, (Item #: 203191) $331.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings

Clutch Control Valve Gasket - For John Deere tractor models 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1950, 1950N, 2040 (s/n 350000-later), 2140, 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440 (s/n 341000-later), 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 301A (s/n 389637-later), 302 (s/n 389637-later), 401B (s/n 700790-later), 401D, Replaces John Deere OEM number L34345, All John Deere Construction and Industrial; With Independent PTO, (Item #: 161856) $4.90

Cylindrical Roller Bearing - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1850, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 490, 790, 792, Replaces John Deere OEM number L65031, JD10105, Inside Diameter: 1.260", Outer Ring Width: .669", Outside Diameter: 1.772", (Item #: 167707) $33.20

No
Picture
Oil Pump Drive Shaft Seal - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3340, 3350, 3640, 3650, Replaces John Deere OEM number AL28922, Outside Diameter: 1.770", Shaft Diameter: 1.259", Type: Single Lip, Width: .354", (Item #: 167705) $8.70

Rear Axle Final Drive Gasket - For John Deere tractor models 2651, 2840, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3120, 3130, 3135, 3140, 3150, 3340, 3350, 3351, 3640, 3650, 3651, Replaces John Deere OEM number L62426, T28836, (Item #: 179549) $16.40

Shift Cover Manifold Gasket - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, Replaces John Deere OEM number L61964, L33775, L33766, L42048, (Item #: 179562) $12.40

No
Picture
Throwout Bearing, Used - For John Deere tractor models 2040, 2250, 2255, 2355, 2450, 2555, 2650, 2750, 2755, 2850, 2955, 3055, 3150, 3155, 3350, 3640, 3650, Replaces John Deere OEM number AL120028, AL66088, AL39242, AL120029, For Standard Duty use Item #: 169110, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453523) $134.01

Engine Gaskets

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 3310, 3310X, 3340, 3350, 3400, 3400X, 3410, 3640, 3640S, 3650, 4030, 4040, 4040S, 4050, 4120, 5036C, 5038D, 5041C, 5042D, 5045B, 5045D, 5045E, 5045U, 5047D, 5050D, 5055B, 5055B, 5055D, 5055D, 5055E, 5055U, 5060E, 5065E, 5065M, 5065U, 5075E, 5075M, 5075U, 5103, 5103E, 5103S, 5104, 5105, 5200, 5203. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.40

Engine Parts

Camshaft and Lifter Kit - This Camshaft and Lifter Kit replaces those marked: R39345 or RE522313. Used on 2950, 2955, (3040 SN 430000>), (3050 European Edition), 3055, (3140 SN 430000>), 3150, 3155, 3255, (3350 European Edition), (3640 European Edition), (3650 European Edition), (4050 with 6359TR Engine), (6506 European Edition), (6600 European Edition), (6800 European Edition), (6900 European Edition), (7500 SN <001336). Replaces AT18190, DD13432, AR79624, RE14977, R79345 (Item #: 124446, Ref: RE53884) $405.00

Connecting Rod Bolt - Used only for connecting rods with casting number: R80032, R80034, R81410, R121092, or R113612. Check casting number before ordering. 2.325 inch long. (Item #: 123880, Ref: R80033) $3.50

Dampener Pulley - For John Deere tractor models 2955, 3055, 3155, 3255, 3350, 3650, Replaces John Deere OEM number RE26920, (Item #: 157752) $221.00

No
Picture
Differential Bevel Gear, Used - For John Deere tractor models 1030, 1130, 1630, 1640, 1840, 2040, 2140, 2250, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6403, 6405, 6420, 6500, 6505, 6510, 6520, 6605, 6610, 6620, Replaces John Deere OEM number L28376, For a new version of this item use Item #: 173236, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449375) $71.01

John Deere, RE53884, Used - For John Deere tractor models 2950, 2955, 3040 (s/n 430000-later), 3050, 3140 (s/n 430000-later), 3150, 3155, 3255, 3350, 3640, 3650, 4050 (with 6359TR engine), 6506, 6600, 6800, 6900, 7500 (s/n 001336-earlier), Compatible with John Deere Engine(s) 6359, Replaces John Deere OEM number RE53884, AR79624, AT18190, R79345, RE14977, For a new version of this item use Item #: 124446, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463987) $165.01

Valve Lifter, Used - For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 301, 820, 830, 840 (s/n 599999-earlier), 920, 930, 940, 1020, 1030, 1035 (s/n 50000-later), 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1635, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 2130, 2135 (s/n 50000-later), 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040, 3050, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3200, 3210, 3255, 3300, 3310, 3340, 3350, 3400, 3410, 3640, 3650, 4030, 4040, 4240, 5103, 5105, 5200, 5203, 5205, 5210, 5215F, 5215V, 5220, 5300, 5303, 5310, 5315, 5315V, 5320, 5400, 5403, 5410, 5415, 5500, 5510, 5515, 5515V, 5600, 5700, 6200, 6300, 6400, 6500, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 945, 952, 975, 985, 1032, 1042, 1052, 1065 (s/n 41200-later), 1068, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, 2054 (European), 2056 (European), 2058 (European), 3300, 4400, 4420, 4435, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5440, 7440, 7445, 7450, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 301A, 344E, 344G, 401B, 444, 444C, 444D, 444E, 444G, 544, 544G, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20073, For a new version of this item use Item #: 123888, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442423) $4.51

Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Item #: 121443, Ref: T20129) $5.30

Exhaust System

No
Picture
Exhaust Pipe - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s/n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3050, 3140 (s/n 430000-later), 3150, 3155, 3350, 3640, 3650, Replaces John Deere OEM number AL61138, Length: 50.39", Additional Handling and Oversize Fees Apply To This Item, (Item #: 171479) $216.00

Exhaust Pipe - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s/n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2150, 2155, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3050, 3055, 3140 (s/n 430000-later), 3150, 3155, 3350, 3640, 3650, Replaces John Deere OEM number AL61139, Length: 42.72", (Item #: 171481) $180.01

Manifold - For John Deere tractor models 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3255, 3340, 3350, 3650, Compatible with John Deere Combine (s) 965, 1065, 1072, 1075, 1155, 1157, 1158, 1166, 1169, 1174, 4435, Compatible with John Deere Harvester (s) 9920, 9930, Replaces John Deere OEM number R90262, (Item #: 164562) $98.98

Muffler - This is an under hood muffler used on John Deere models: 3140, 3255, 3340, 3350, 3640S, 3650. Replaces AL32652 (Item #: 113527, Ref: AL32652) $236.00

Fuel System / Air Intake

Fuel Cap - For plastic fuel tanks. 2 5/16" opening. Replaces OEM AL34678. For tractor models 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1950, 1640, 1840, 2040, 2150, 2350, 2550, 2650, 2750, 2850, 2355, 2555, 2755, 2855, 2940, 3040, 3140, 3640, 2950, 3050, 3150, 3350, 3650, 2955, 3055, 3155 and 3255. (Item #: 113550, Ref: AL34678_) $13.20

Fuel Pump - For 1550, 1750, 1850, 1950, 2155, 2250, 2355N, 2450, 2555, 2650, 2755, 2850, 2855, 2950, 3050, 3055, 3155, 3255, 3350, 3650. S58852 (Item #: 119800, Ref: RE38009) $26.00

Locking Fuel Tank Cap - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2140, 2150, 2155, 2240 (s/n 350000-later), 2250, 2255, 2350, 2355, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL34678, For tractors with plastic fuel tanks, Fuel Cap - Red use Item #: 113550, (Item #: 121517) $16.00

Pre Cleaner Assembly - Assembly has a 3 inch pipe and a 10 inch diameter. For the following John Deere Models: 1032, 1042, 1052, 1155, 1157, 1158, 2040S, 2140, 2355, 2450, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3155, 3340, 3350, 3640, 3640S, 3650, 952. Replaces AZ24175. (Item #: 112379, Ref: C9NN9A660C) $36.00

Gauges

Water Temperature Sending Unit - This Water Temperature Sending Unit is used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650, 5103, 5103E, 5105, 5200, 5203, 5205, 5210, 5215, 5220, 5300, 5303, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420N, 5500, 5510, 5515, 5515V, 5520N, 5600, 5610, 5615V, 5700, 6010, 6100, 6110, 6200, 6200L, 6205, 6210, 6210L, 6215, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6415, 6500, 6500L, 6505, 6510, 6510L, 6515, 6520, 6600, 6605, 6610, 6615, 6620, 6715, 6800, 6900, 7405, 7500, 7505, 840, 940. It replaces John Deere part numbers RE515494, RE51774, AZ15473, AL24527, DE12465 (Item #: 158985, Ref: AL24527) $15.30

Hitch / Drawbar

Load Control Shaft - For John Deere tractor models 2040 (with High Lift), 2140 (with High Lift), 2650 (with High Lift), 2850 (with High Lift), 2955 (with High Lift), 3040 (with High Lift), 3050 (with High Lift), 3055 (with High Lift), 3140 (with High Lift), 3150, 3155 (with High Lift), 3255 (with High Lift), 3350 (with High Lift), 3640, 3650, Replaces John Deere OEM number L41197, 25.25" Long, 1.102" Diameter, (Item #: 152047) $151.00

Rear Draft Link Lock - Used on John Deere 2955, 3055, 3150, 3255, 3650, 4040, 4240, 4250, 4255, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7520, 7530, 7600, 7610, 7700, 7710, 7800, 7810. This part replaces OEM numbers AR74179, AR90084, RE11578 (Item #: 153450, Ref: RE11578) $60.00

Spring Clamp - For John Deere tractor models 830 (3 cyl.), 840, 930, 940, 1020 (s/n 183987-later), 1030, 1035, 1040, 1120 (s/n 183987-later), 1130, 1140, 1350, 1530, 1550, 1630, 1635, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020 (s/n 039087-later), 2030, 2035, 2040, 2040S, 2120 (s/n 039087-later), 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3135, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B (s/n 715671-later), 301A (s/n 715671-later), 401B, 401D, Replaces John Deere OEM number L26936, (Item #: 161830) $2.30

Hydraulic System

Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432) $16.10

Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360) $3.80

Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822) $3.10

Hydraulic Pump - New pump has 8 pistons, keyed shaft with needle bearing 23cm, 13.5 G.P.M, 2750 P.S.I - no flow, 2000 P.S.I - max flow. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. (Item #: 109916, Ref: AR103033) $500.00

Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Item #: 165242, Ref: AR94660) $1350.01

Hydraulic Pump - Hydraulic Pump has 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 5/8 Right Inlet, 1 1/16 inch Discharge. Verify measuerments before ordering. It is used on 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 300 Indust/Const, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 500 Indust/Const, 5010, 600 Indust/Const, 9950 Cotton Picker, 9960 Cotton Picker, 9965 Cotton Picker, 9970 Cotton Picker. It replaces AR39168, AR90459, AR97872, R39695 (Item #: 114592, Ref: AR97872) $930.00

No
Picture
Hydraulic Pump - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970 (Power Shift), Compatible with John Deere Construction and industrial models 300, 500, 600, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", Right Inlet: 1-5/8", Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200410, (Item #: 121710) $1000.00

Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569) $15.20

Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202) $8.00

Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is used on John Deere 2955, 3050, 3055, 3155, 3255, 3350, 3650. Replaces L42188 (Item #: 167886, Ref: L42188) $95.00

Hydraulic Pump Packing - For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 7445 (s/n 275483, 4.219 engine), Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s/n 123113-earlier), 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s/n 123113-earlier), 844, 860, 860A, 862, Compatible with John Deere Engine (s) 6359T, 6466D, 6466T, Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483, 4.219 engine), Replaces John Deere OEM number R26149, (Item #: 113996) $2.20

Hydraulic Pump Piston - For John Deere tractor models 1550, 1750, 1830, 1850, 1950, 2030, 2040, 2140, 2250, 2450, 2650, 2850, 3020, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650, 4000, 4010, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4440, 4450, 4455, 4520, 4620, 4630, 4640, Replaces John Deere OEM number R27150, (Item #: 113877) $10.90

No
Picture
Hydraulic Pump, Remanufactured, AR94660 - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300, 500, 600, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", RH Inlet: 1-5/8", LH Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 121710, (Item #: 200410) $1223.01

Hydraulic Pump, Used - For John Deere tractor models 500, 600, 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", RH Inlet: 1-5/8", LH Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 200410, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400410) $660.01

No
Picture
Hydraulic Quick Coupler Female Coupling - For John Deere tractor models 1640 (s/n: 430000-later), 2040 (s/n: 430000-later), 2040S (s/n: 430000-later), 2140 (s/n: 430000-later), 2250 (Euro Edition), 2355 (GTP), 2450 (Euro Edition), 2555 (GTP), 2650 (Euro Edition), 2755 (GTP), 2850 (Euro Edition), 2955 (s/n: 765516-earlier), 3040 (Euro Edition, s/n: 430000-later), 3050 (Euro Edition), 3140 (Euro Edition, s/n: 430000-later), 3150, 3255, 3350 (Euro Edition), 3640 (S, Euro Edition), 3640, 3650 (Euro Edition), 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 (74-81), 8450, 8630, 8650, 9100, 9200, 9300, 9400, 9400T, Replaces John Deere OEM number AR58287, Suction Side, (Item #: 176344) $28.20

Hydraulic Quick Coupler Socket, Spool Type - For John Deere tractor models 1350, 1550, 1750, 1850, 1950, 1950N, 2150, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3050, 3055, 3155, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL172304, Overall Length: 2.453", Thread: Metric, Thread Size: .709", (Item #: 171459) $22.40

Hydraulic Selector Control Valve Pinion - Used in both single and double lever hydraulic selector control valves on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2250, 2350, 2355, 2450, 2550, 2650, 2750, 2755, 2850, 2855N, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3155, 3255, 3350, 3640, 3650, 840, 940. The rack for this pinion is available separately as part number T32132 (Item #: 179677, Ref: T32547) $55.12

Hydraulic Selector Control Valve Rack - Used in conjunction with T32547, this rack is used in both single and double lever hydraulic selector control valves. (Item #: 179400, Ref: T32132) $95.94

Rockshaft Cover Gasket Kit - Rockshaft Cover Gasket Kit (Lift Cover) includes a metal gasket. John Deere TRACTOR: 1040, 1140, 1350, 1640 (serial number 430, 000 and up), 1641, 1641F, 1750, 1840, 1850, 1950, 2040 (serial number 430, 000 and up), 2040S (serial number 430, 000 and up), 2140 (serial number 430, 000 and up), 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (before serial number 767517), 3040 (serial number 430, 000 and up), 3050, 3055, 3140 (serial number 430, 000 and up), 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, 840, 940. Replaces AL57974 (Item #: 164140, Ref: AL57974) $59.00

Selective Control Valve - This Selective Control Valve is used on multiple John Deere Models. It replaces John Deere OEM numbers AL26989, AL30397, AT31246 (Item #: 116872, Ref: AL34593) $325.00

Valve Kit, Hydraulic Pump - For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. Replaces R48738, R83508, R48738, R49297 (Item #: 113883, Ref: S-RE23382) $6.80

Lights

Headlight Assembly without Bulb - Right Hand Headlight bolts to grill. For tractor models 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. Replaces S-DE13524, S-L34849, S-DE13523, S-L34897. (Item #: 114279, Ref: DE13523) $59.00

Headlight Assembly without Bulb Left Hand - Left Hand Headlight bolts to front and side of grill. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. Replaces S-DE13524, S-L34849, S-DE13523, S-L34897. (Item #: 114278, Ref: DE13524) $62.00

Headlight Bulb - For Headlight DE13523 and DE13524. 45-50 Watt Bulb. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. (Item #: 117738, Ref: S4779) $4.40

No
Picture
Headlight Bulb - For Headlight DE13523 and DE13524. 55-60 Watt Bulb. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. (Item #: 121418, Ref: S5090) $3.80

Miscellaneous

No
Picture
Cab Foam Main Headliner, Brindle Brown - For John Deere tractor models 2250, 2450, 2650, 2650N, 2850, 3050, 3350, 3640, 3650 (all using Console Comfort Cab), Color: Brindle Brown, Kits are computer cut to assure accuracy, Includes Cab Foam Headliner Escape Hatch, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112884) $423.00

No
Picture
Load Sensing Bushing, Used - For John Deere tractor models 1350 (s/n 651780-later), 1550 (s/n 651780-later), 1640, 1750 (s/n 651780-later), 1840, 1850 (s/n 651780-later), 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2350 (s/n 529512-later), 2355, 2355N, 2450, 2550 (s/n 529512-later), 2555, 2640, 2650, 2650N, 2750 (s/n 529512-later), 2755, 2840, 2850, 2855, 2855N, 2940, 2950 (s/n 531762-later), 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B, 410B, 410D, Replaces John Deere OEM number L41196, For a new version of this item use Item #: 166247, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452664) $8.01

Load Sensing Bushing with O-Ring - For John Deere tractor models 1350 (s/n 651780-later), 1550 (s/n 651780-later), 1640, 1750 (s/n 651780-later), 1840, 1850 (s/n 651780-later), 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2350 (s/n 529512-later), 2355, 2355N, 2450, 2550 (s/n 529512-later), 2555, 2640, 2650, 2650N, 2750 (s/n 529512-later), 2755, 2840, 2850, 2855, 2855N, 2940, 2950 (s/n 531762-later), 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B, 410B, 410D, Replaces John Deere OEM number L41196, (Item #: 166247) $15.00

Needle Bearing - For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650, Replaces John Deere OEM number JD9858, T400012, T40012, (Item #: 118796) $8.98

Weather Strip Seal, Lower Door Window - Left Hand - For John Deere tractor models 1640, 2040, 2040S, 2140, 2250 (European), 2350, 2355, 2450 (European), 2550, 2555, 2650 (European), 2750, 2755, 2850 (European), 2855N, 2940, 2950, 2955 (s/n-earlier), 3040, 3050 (European), 3055, 3140, 3150, 3155, 3255, 3350 (European), 3640 (European), 3650 (European), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number L40413, R52113, Fits Left Hand Side, Lower door weatherstrip, For Cab Glass, Door, Lower - Left Hand use Item #: 150463, (Item #: 155733) $54.48

Oil System

Oil Pump Tube - For John Deere tractor models 820 (s/n 031310 - later), 830, 920, 930, 940, 1020 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1030, 1040, 1120, 1130, 1140, 1350, 1520 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 1950N, 2020 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 2030, 2040, 2040S, 2120, 2140, 2150, 2155 (s/n 957545 - earlier), 2240, 2255, 2350, 2355 (s/n 957545 - earlier), 2355N (s/n 957545 - earlier), 2510 (Gas s/n 082858 - later, Diesel s/n 082721 - later), 2520, 2550, 2555 (s/n 957545 - earlier), 2650, 2650N, 2750, 2755 (s/n 957545 - earlier), 2840, 2850, 2855N (s/n 957545 - earlier), 2940, 2950, 2955 (s/n 957545 - earlier), 3030, 3050, 3055 (s/n 957545 - earlier), 3120, 3130, 3150, 3155 (s/n 957545 - earlier), 3255 (s/n 957545 - earlier), 3350, 3650, 4030, 5200 (s/n 106773 - earlier), 5300 (s/n 106773 - earlier), 5400 (s/n 106773 - earlier), Compatible with John Deere Construction and industrial models 210C, 300 (Gas s/n 23037 - later, Diesel s/n 23155 - later), 300B, 301A, 302, 310, 310A, 310B, 310C, 310D, 315D, 350B, 350C, 350D, 355D, 380, 400 (Gas s/n 23037 - later, Diesel s/n 23155 - later), 400G, 401, 401B, 401C, 401D, 415B, 450 (s/n 22565 - later), 450B, 450C, 450D, 455D, 480 (Gas s/n 23759 - later, Diesel s/n 22937 - later), 480A, 480B, 480C, 482C, 515B, Replaces John Deere OEM number T20050, (Item #: 158407) $12.60

Oil Pump Tube - For John Deere tractor models 820, 920, 1020, 1030, 1040, 1130, 1140, 1420, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3040, 3050, 3055, 3140, 3155, 3255, 3650, 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5500, 6200, 6200L, 6300, 6300L, Compatible with John Deere Construction and industrial models 210C, 300, 300B, 301A, 302, 302A, 310, 310B, 310C, 310D, 315C, 350A, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 415B, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 482C, Replaces John Deere OEM number R113752, (Item #: 158408) $11.80

O-Ring - For John Deere tractor models 820 (s/n 031310 - later), 830, 920, 940, 1020 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1030, 1040, 1120, 1130, 1140, 1520 (Gas s/n 023249 - later, Diesel s/n 023689 - later), 1530, 1550, 1630, 1750, 1850, 1950, 1950N, 2040, 2150, 2155 (s/n 957545 - earlier), 2240, 2255, 2355N (s/n 957545 - earlier), 2840, 2940, 2950, 2955 (s/n 957545 - earlier), 3030, 3040, 3050, 3055 (s/n 957545 - earlier), 3120, 3130, 3140, 3150, 3155 (s/n 957545 - earlier), 3255 (s/n 957545 - earlier), 3350, 3650, 4030, 5200 (s/n 106773 - earlier), 5300 (s/n 106773 - earlier), 5400 (s/n 106773 - earlier), Compatible with John Deere Construction and industrial models 300 (Gas s/n 23037 - later, Diesel s/n 23155 - later), 300B, 301A, 302, 310, 350B, 350C, 350D, 355D, 380, Replaces John Deere OEM number R74354, (Item #: 158411) $0.50

PTO / Driveline

PTO Bearing Cap Gasket - For John Deere tractor models 840, 940 (& V), 1040 (& V), 1140 (& F, V), 1350, 1550, 1640 (& F), 1641, 1641F, 1750 (& V), 1840 (& F), 1850 (& F, V), 1850N, 1950 (& F), 1950N, 2040 (& F), 2040S, 2140, 2141, 2150, 2155, 2250 (& F), 2251, 2255, 2350, 2351, 2355, 2355N, 2450 (& F), 2541, 2550, 2555, 2650 (& F), 2650N, 2651, 2750, 2755, 2850, 2855N, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number A-L60548, (Item #: 179539) $23.50

PTO Guide - Used on John Deere 301, 500, 600, 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455. Replaces John Deere OEM numbers R38220, R70960, R72046, R45126 (Item #: 121740) $79.00

PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

PTO Shaft, Used - For John Deere tractor models 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4350, Replaces John Deere OEM number T28672, 1000 RPM, 11.414" Long, 21 Spline, For a new version of this item use Item #: 113971, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413971) $75.00

Sheet Metal / Body Parts

No
Picture
Gas Strut Spring Cylinder, Rear Window - For John Deere tractor models 2250 (s/n 690261-later), 2450 (s/n 690261-later), 2650 (s/n 690261-later), 2850 (s/n 690261-later), 3050 (s/n 690261-later), 3150 (s/n 690261-later), 3350 (s/n 690261-later), 3650 (s/n 690261-later), Replaces John Deere OEM number AL68211, Additional Handling and Oversize Fees Apply To This Item, (Item #: 113156) $26.11

Gas Strut Spring Cylinder, Rear Window - For John Deere tractor models 1640 (With SG2 cab), 2040 (With SG2 cab), 2040S (With SG2 cab), 2140 (With SG2 cab), 2250 (With SG2 cab), 2450 (With SG2 cab), 2650 (With SG2 cab), 2850 (With SG2 cab), 3040 (With SG2 cab), 3050 (With SG2 cab), 3140 (With SG2 cab), 3150 (With SG2 cab), 3350 (With SG2 cab), 3640 (With SG2 cab), 3650 (With SG2 cab), 4055 (With SG2 cab), 4255 (With SG2 cab), 4450 (With SG2 cab), 4455 (With SG2 cab), 4650 (With SG2 cab), 4755 (With SG2 cab), 4850 (With SG2 cab), 4955 (With SG2 cab), Replaces John Deere OEM number AL66992, AL35675, Rod Diameter: 0.315", Cylinder Diameter: 0.709", Piston Length: 12.795", Overall Length: 28.937", Cylinder and rod end fitting ball and socket, (Item #: 113246) $17.94

Side Screen Knob - For tractor models 1550, (4050 from SN# 5511), 4050, 4055, 4250, 4255, 4450, 4455, 2355, 2555, 2755, 2855N, 2955, 3055, 3155, 3255, 2155, 2355N, 3050, 3350, 2650, 2650N, 2850, 2250, 2450, 1650, 1750, 1850, 1950, 1950N, 3650, 3150, 6300, 6500, 6600. (Item #: 179662, Ref: L63150) $8.90

Steering

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.00

Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555. (Item #: 104717, Ref: AL68616) $48.10

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $19.30

Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Item #: 165413, Ref: 1810503M92) $27.80

Pivot Bushing, Rear - For John Deere tractor models 2955, 3005, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, Replaces John Deere OEM number L63510, L62838, Length: 1.970", I.D. 2.000", (Item #: 170429) $20.90

Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010) $351.00

Power Steering Hand Pump - For John Deere tractor models 1640, 2040, 2040S, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3650, 3651, Replaces John Deere OEM number AL41291, (Item #: 164832) $255.00

No
Picture
Steering Motor - For John Deere tractor models 3050, 3140, 3350, 3640, 3650, Replaces John Deere OEM number AL55296, (Item #: 164465) $323.00

Tie Rod Assembly - Left - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Left Hand. (Item #: 104848, Ref: AL69818) $301.00

Tie Rod Assembly - Right - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Right Hand. (Item #: 104854, Ref: AL69819) $137.00

Tie Rod Center - Measuring 9 inches overall with M24 X 1.5 right hand thread on one side and M28 X 1.5 right had thread on the other, this part is used on John Deere 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. This part replaces AL168703, AL68253. It used with AL68254 and AL68255. (Item #: 127440, Ref: AL68253) $64.00

Tie Rod, Left Side - This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3640, 3650, (3040, 3140 ALL WITH MFWD Serial Number 430000 and up) Replaces AL168701, AL68254 (Item #: 104850, Ref: AL68254) $42.30

Tie Rod, Right Side - This This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650 (Item #: 104851, Ref: AL68255) $65.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.60

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.90

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.90

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 3650 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 3650 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 3650 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 3650 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 3650 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 3650 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 3650 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$John Deere 3650 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.00

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00