Belt - Fan - For John Deere tractor models 3010 (Diesel), 3020 (Diesel with s/n 123000-earlier), 4000 (Gas), 4010 (Diesel), 4020 (Diesel s/n 201000-earlier), 4230 (Gas), Replaces John Deere OEM number R41681, Polyester Cord, Length: 56.25", Width: .5", (Item #: 114001)$9.70
Brakes
Brake Backing Plate with Facings - For John Deere tractor models 4000, 4020, 4055, 4230, 4255, 4430, 4455, Compatible with John Deere Construction and industrial models 544B, 644D, 644E, 646B (s/n 223645-later), 646C, 762B, Replaces John Deere OEM number RE46332, AR54699, Replaces John Deere Casting number R60116, R79409, R93130, R97786, For Brake Disc use Item #: 105609, (Item #: 158976)$213.00
Brake Center Plate - Brake center plate~ 15 diameter~.185 thick~ 15 teeth.Can be used with Sunshaft R59928 or R62685 for Tractors:4000 with 51mm final drive, 4020 with 51mm final drive, 4040, 4050 except Hi Crop, 4230 SN# 015453 and up except Hi Crop, 4240 except Hi Crop, 4250 e For 4240, 4440. **PLEASE VERIFY THICKNESS NEEDED FOR YOUR APPLICATION*** (Item #: 105616, Ref: TP-R62686)$90.00
Brake Center Plate, Used - For John Deere tractor models 4000, 4020, 4230, 4320, 4430, Compatible with John Deere Construction and industrial models 570, 570A, 644, 644A, 644B, 646, 646B, Replaces John Deere OEM number R78430, R33819, R45780, R45781, R48476, Diameter: 15.000", Teeth: 15, Use with Sunshaft R45779 or R33431, For a new version of this item use Item #: 105617, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405617)$37.01
No Picture
Brake Disc - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, Replaces John Deere OEM number AR66749, AR72373, Riveted linings (pads) are not included, (Item #: 105609)$286.00
Brake Disc, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, Replaces John Deere OEM number AR66749, AR72373, Marked R59931, R79409, R60119, R50585, R40153, R40152, R59934, R60116, R33817, Rivited Pads, Check thickness of lip on inside of plate. Could be either 3/8", 1/2", or 1 1/8", For a new version of this item use Item #: 105609, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405609)$71.01
Brake Disc, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Construction and industrial models 544B, 544C, 544D, Replaces John Deere OEM number R78429, R26767, R32399, Teeth: 18, Outside Diameter: 15" (382 mm), Inside Diameter: 4-1/16" (104 mm), For a new version of this item use Item #: 105613, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499522)$62.40
Brake Disc, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4230, 4320, 4430, Compatible with John Deere Construction and industrial models 570B, 670, 670A, 670B, 672A, 672B, Replaces John Deere OEM nos R85708, Teeth: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499624)$117.01
Brake Pad - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number AR28487, R26969, R90085, 2-1/2" X 6-1/2", Mounting rivets not included, 6 pads required per side, 12 total for tractor, (Item #: 165736)$20.30
No Picture
Brake Pad Rivets - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R1761, Pack of 20, Length: 1/2", (Item #: 180907)$8.90
Brake Pad Rivets - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860, Replaces John Deere OEM number D1761R, D1761, Length: 0.481", Width: 0.182", Package of 36, Most brake pads require 6 rivets per pad, (Item #: 189180)$7.50
Brake Pad Rivets - For John Deere tractor models 3010, 4000 (Hi-Crop), 4010, 4020 (Hi-Crop), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 5010, 5020, 6030, Compatible with John Deere Construction and industrial models 570, 570A, 644A, 644B, 700A, 743A, 760A, 860, Replaces John Deere OEM number D2593R, Diameter: .182", Length: 0.671", Package of 18, (Item #: 189218)$5.30
Brake Pad Rivets - For John Deere tractor models 3010, 4000, 4010, 4020, 4230, 4430, Replaces John Deere OEM number R26301, 38B363, Diameter: .182", Length: 1.343", Package of 18, (Item #: 189234)$5.60
Brake Pad Rivets - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860, Replaces John Deere OEM number D1761R, D1761, Length: 0.481", Width: 0.182", Package of 36, Most brake pads require 6 rivets per pad, (Item #: 190752)$9.90
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Item #: 105607, Ref: AR28487)$18.40
Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R)$9.00
Brake Pinion Shaft - For John Deere tractor models 4000, 4020, 4050 (PS s/n 2725-later or QR s/n 6644-later), 4055 (using 86mm Axle), 4230 (s/n 26189-later), 4250 (s/n 1000-later), 4255 (using 86mm Axle), 4320, 4430 (s/n 40771-later), Replaces John Deere OEM number R62685, R58829, Teeth: 15, Splines: 18, Length: 9.780, (Item #: 108529)$72.98
Brake Pinion Shaft, Used - For John Deere tractor models 4000, 4020, 4050 (PS s/n 2725-later or QR s/n 6644-later), 4055 (using 86mm Axle), 4230 (s/n 26189-later), 4250 (s/n 1000-later), 4255 (using 86mm Axle), 4320, 4430 (s/n 40771-later), Replaces John Deere OEM number R62685, R108996, R58828, Teeth: 15, Splines: 18, Length: 9.780, For a new version of this item use Item #: 108529, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408529)$110.01
Brake Pinion Shaft, Used - For John Deere tractor models 4000, 4020, 4230 (s/n 15452-earlier), 4320, 4430 (s/n 21269-earlier), 7520 (front axle only), Replaces John Deere OEM nos R45779, R33431, Teeth: 15, Splines: 18, Length: 9.39", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499460)$50.01
Brake Pinion, Used - For John Deere tractor models 4000, 4020, 4230, 4430, Replaces John Deere OEM nos R59928, 51 mm wide gear, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498778)$110.01
Brake Plate - This 15 inch Diameter Breaker Plate has a center hub of 15 Teeth, 4 3/16 inch diameter. Teeth have a 1/16 inch flat tip. The plate is .220 thick. Use with Brake Shaft R56731, R59928, R62685, and R67198 For 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430. **PLEASE VERIFY THICKNESS NEEDED FOR YOUR APPLICATION*** (Item #: 105616, Ref: R62686)$90.00
Brake Plate - This Breake Plate is 15 inches in Diameter with a 15 Tooth hub with 4 1/4 inch diameter. The teeth have a 1/4 inch flat tip. Use with Brake Shaft R33431 and R45799 For 4000, 4020, 4230, 4320, 4430, 4440. (Item #: 105617, Ref: R78430)$101.95
Brake Plate and Piston, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8640, 8850, Compatible with John Deere Construction and industrial models 570, 570A, 600, 644A, 646, 646B, 740, 740A, 743A, Replaces John Deere OEM nos AR32243, Lining Width: 2 7/16", Plate Width: 3 1/8", Piston Diameter: 1 7/8", Riveted Lining, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498300)$25.01
Brake Plate and Piston, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, Replaces John Deere OEM nos R48240, AR32243, Lining Width: 3", With rivited linings, Plate Width: 3 3/8", Piston Diameter: 2 1/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497651)$20.01
Brake Plate and Piston, Used - For John Deere tractor models 700, 3020 (s/n 123), 4000 (s/n 201), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 5010, 5020, Compatible with John Deere Construction and industrial models 500, 510, 540, 544, 570, 624, 640, 644, 646, 670, 672, 710, 762, Replaces John Deere OEM nos R48240, RE234308, RE32681, Plate Width: 3 1/8", Piston Diameter: 2-1/4", Lining Width:2 7/16", With rivited linings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498849)$30.01
Brake Plate and Piston, Used - For John Deere tractor models 4000, 4020, Compatible with John Deere Construction and industrial models 644A, 646B, 740A, 743A, Replaces Jacobsen OEM nos R42225, Plate Width: 3 3/8" Part No AR3243, Piston Diameter: 1 7/8" Part No R42225, Lining Width: 3", With rivited linings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497653)$31.01
Brake Plate with Linings, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, Compatible with John Deere Construction and industrial models 544B, 544D, 644D, 644E, 646, 646B, 646C, 762B, Replaces John Deere OEM nos RE46332, RE33013, Replaces John Deere Casting nos R59931, R60116, R79409, R97786, Bonded Pads, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499623)$110.01
Brake Valve Assembly, Remanufactured, AR42400, R31454 - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510B, 570, 570A, 600, 700, Replaces John Deere OEM number AR42400, Replaces Casting number R31454, (Item #: 205168)$1150.01
Brake Valve Assembly, Remanufactured, AR42400, R42007, R67309, R67313 - For John Deere tractor models 500, 510, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510B, 570, 570A, 600, 700, Replaces John Deere OEM number AR42400, Replaces Casting number R42007, R67309, R67313, (Item #: 205174)$942.01
Brake Valve Assembly, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510, 570, 600, 700, Replaces John Deere OEM number AR42400, Replaces John Deere Casting nos R31454, R42007, For a Remanufactured version of this part use Item #: 205168, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405168)$675.01
Planetary Brake Clutch Pack Plate - 4th - For John Deere tractor models 2510, 2520, 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440 (All With Powershift Transmission), Replaces John Deere OEM number R48235, AE52288, R33871, R33873, O.D.: 11.600", I.D: 9.710", (Item #: 127089)$54.00
Planetary Brake Kit - Kit includes 16 friction discs, 16 separator plates, and 12 seals. For tractor models 4000, 4020 covers all serial numbers. (Item #: 172829, Ref: PBK520)$1485.90
Planetary Brakes Clutch Pack Plate - For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission), Replaces John Deere OEM number R48236, R33872, O.D.: 11.620", I.D.: 9.700", (Item #: 117041)$29.98
Clutch Disc, 13 - 1.250" spline diameter, 19 spline. For tractor models 3020, (4000 SN# 201000 and up), 4020, 4230, 4240, (4430 SN# 022373 and up) all with powershift. (Item #: 130097, Ref: RE29607)$352.00
Clutch Disc, Remanufactured - For John Deere tractor models 4000, 4010, 4020, New Design- engages smoothly like a woven disc with the holding power of a heavy duty 6 Pad, Large pads, Clutch Size: 12", Clutch Hub: 1-1/4", Clutch Spline: 19, Clutch Center: Solid, Clutch Type: 6 Pad, (Item #: 204573)$160.01
Clutch Disc, Remanufactured, AR26603 - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM number AR26603, AR42127, AR55660, RE210075, RE29769, RE32049, Clutch Size: 12", Clutch Hub: 1-1/4", Clutch Spline: 19, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 114013, (Item #: 204234)$93.01
Clutch Disc, Remanufactured, AR312185 - For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4430, Compatible with John Deere Construction and industrial models 500, 510, Replaces John Deere OEM number AR312185, AR40667, AR55655, RE29608, Clutch Size: 13", Clutch Hub: 1-1/4", Clutch Spline: 19, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205757)$336.00
Clutch Kit - Clutch kit, for transmission and PTO clutch. Includes new: pressure plate assembly, 12 with 11 PTO disc, 29 spline, 1-7/8 hub~ new clutch disc, 12, 19 spline, 1-1/4 hub, woven lining (will replace button style disc), new clutch and PTO release bearings (2) and For tractor models 4010, 4020. Replaces RE153029, AR42127, T6203, T6014. Clutch alignment tool not included. For Alignment tool use item # 118891 (Item #: 156034, Ref: R41411NKIT)$820.00
No Picture
Clutch Kit - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM number RE179193, Clutch Size:12", Clutch Hub:1-1/4", Clutch Spline:19, Clutch Center:Solid, Clutch Type:6 Pad, Pressure Plate Size: 12", Pressure Plate Hub: 1-7/8", Pressure Plate Spline: 29, Pressure Plate Type: Flywheel Step 2.844", Kit Contains: PTO Disc, Transmission Disc, PTO Release Bearing, Transmission Release Bearing, Pilot Bearing, Additional Handling and Oversize Fees Apply To This Item, (Item #: 160951)$910.00
No Picture
Clutch Kit, Remanufactured - For John Deere tractor models 4000, 4010, 4020 (Syncro Range), Clutch Diameter - 12", Clutch Hub Diameter - 1-1/4", Clutch Splines - 19, Clutch Center - Solid, Clutch Type - 6 Large Carbotic Pads, Pressure Plate Size - 12", Pressure Plate Levers - 6, Pressure Plate Springs - 15, Pressure Plate Hub Diameter - 1-7/8", Pressure Plate Splines - 29, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202065)$1133.00
No Picture
Clutch Lever - For John Deere tractor models 3010 (s/n 067999-earlier), 3010 (s/n 068000-later), 3020 (s/n 067999-earlier), 3020 (s/n 068000-later), 4000, 4010, 4020, 4320, Replaces John Deere OEM number AR31906, (Item #: 176338)$34.00
Clutch Lever Pin - Part number R31131 is a clutch lever pin used on John Deere models: 500, 600, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 8430 Model Year 1974-1981, 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8850, 8960 (Item #: 172865, Ref: R31131)$8.10
Clutch PTO Plate Return Spring - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 7020, Compatible with John Deere Construction and industrial models 500, 500C, 600, Replaces John Deere OEM number R26659, R48618, Sold Each, (Item #: 114093)$2.40
Clutch Release Throw Out Bearing - Greaseable - Compatible with John Deere Tractor(s) M, MT, 40, 420, 430, 435, 1010, 2510, 2520, 3020, 4000, 4010, 4020, 4030, 4320. Replaces John Deere OEM nos AR41942, AM3983T, AR41794 (Item #: 113482)$20.60
Clutch Valve Housing, Used - For John Deere tractor models 500, 600, 2510, 2520, 4000, 4020, 4040 (s/n 001919-earlier), 4230, 4240 (s/n 004111-earlier), 4430, 4440 (s/n 008895-earlier), 4630, 4640 (s/n 004942-earlier), 4840 (s/n 002950-earlier), Compatible with John Deere Construction and industrial models 500, 570, 570A, Replaces John Deere OEM nos AR45381, Replaces Casting nos R41151, R33155, R33161, R41153, R41668, R44164, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441114)$270.01
Clutch Valve Housing, Used - For John Deere tractor models 3020, 4000 (s/n 201000-later), 4020, 4040 (s/n 001920-later), 4240 (s/n 004112-later), 4440 (s/n 008896-later), 4520, 4620, 4640 (s/n 004943-later), 4840 (s/n 002951-later), Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540D, 548D, 610B, 640, 640D, 648D, 710B, 710C, 740, 740A, 743A, Replaces John Deere OEM nos AR88040, Replaces Casting nos R67483, R67484, R44164, R41153, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452364)$160.01
Pilot Bearing - .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift and synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. Replaces CH12908, JD8504, JD8511, JD9281, JD9449 (Item #: 107933, Ref: C5NN7600A)$3.30
No Picture
Power Shaft Clutch Hub - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4230, Replaces John Deere OEM number R41043, Transmission Clutch Pack, Rear, Power Shift, (Item #: 116835)$220.98
Pressure Plate Assembly, Remanufactured, R40806 - For John Deere tractor models 3020, 4000, 4020, 4230, 4430, Compatible with John Deere Construction and industrial models 500, 500A, 500C, 510, Replaces John Deere OEM number R40806, Pressure Plate Size: 13", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205839)$142.83
No Picture
Pressure Plate Assembly, Remanufactured, RE153030 - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM number RE153030, RE179192, RE179193, Pressure Plate Size: 12", Pressure Plate Levers: 6, Pressure Plate Springs: 15, Pressure Plate Hub: 1-7/8", Pressure Plate Spline: 29, Pressure Plate Type: Dual Stage, Flywheel Step 2.844", Synchro Range Clutch, Woven PTO Disc, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204235)$610.01
PTO Clutch Lever - For John Deere tractor models 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Construction and industrial models 500, 600, Replaces John Deere OEM number R33550, R2661, (Item #: 166994)$24.50
PTO Release Bearing - Greaseable - For John Deere tractor models 4000, 4010, 4020, 4320, Replaces John Deere OEM number AR27447, 2.758" ID, 4.328" OD, .784" Thick, (Item #: 110490)$68.00
No Picture
Ring - For John Deere tractor models 600, 1020, 1030, 1035, 1120, 1130, 1520, 1530, 1630, 1635, 1830, 2020, 2030, 2035, 2130, 2135, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 3135, 4000, 4020, 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 300, 301, 401, 410C, 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 510C, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C, 710D, Replaces John Deere OEM number R26753, (Item #: 165737)$0.50
Syncro Disc - 3.250" I.D., 4.225" O.D.. For tractor models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro/quad), (4230 with syncro/quad SN# up to 037595), (4430 with syncro/quad up to SN# 066737). (Item #: 127145, Ref: RE37104)$11.90
Transmission Plate - 4.125" O.D., 3.152" I.D.. For tractor models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro/quad), (4230 with syncro/quad SN# up to 037595), (4430 with syncro/quad up to SN# 066737). (Item #: 152147, Ref: R27727)$6.60
Air Conditioning Compressor - Air conditioning compressor, A6 w/single groove clutch no oil, 12 volt coil at 10 o'clock, new 5.58 inch dia. clutch and dust cover, superheat compressor, high pressure relief valve. SAE thread, Replaces 272003. Tractors: 1640, 2040, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3155, 3350, 3640, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8440, 8630, 8640, 2040S, 2855N, 4040S, 4240S, 8430 4WD. Super Heat switch (part number 220-5000) and M10X50 manifold manifold bolt are not included. Replaces 904014M92, 70735521, 79005837, 79005837GV, 1904014M92GV, 70735521GV, 500001, TPTY6665GV, TP-TY6665GV, TY6665, 1904014M1, 1904014M91, AR60948, AR68802, AR77343, AR92109, RE60697, SE501456, SE501457, SE503047 (Item #: 176869, Ref: TY6665)$1009.01
Compressor Switch - This is a Super Heat switch use with TY6665 compressor. Replaces AR78501, 220-239, 70262354, 837255M91 (Item #: 121476, Ref: 220-5000)$53.00
Cooling Fan - 5 Blade, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, 4230, Replaces John Deere OEM number AR34451, AR32172, 5 Blades, Diameter: 21", For a new version of this item use Item #: 121441, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421441)$96.00
Cooling Fan - 5 Blade, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, 4230, Replaces John Deere OEM nos AR32172, AR34451, 5 Blades, Diameter: 19", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438443)$60.01
Fan Blade, 5 Blade - 21" diameter, 1.5" pilot hole, 8 mounting holes on 1" centers. For tractor models 4000, 4010, 4020, (4230 without ac). (Item #: 121441, Ref: AR34451)$158.00
Fan Shroud, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM nos R34090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498866)$89.01
Radiator - For 4000 (serial # 201000 up), 4020 both gas or diesel. Replaces AR46434, AR49454, AR46443, 1A7221. (Item #: 101760, Ref: AR49454)$410.00
Radiator Hose - Bulk 3' x 2-1/4 - For John Deere tractor models M, MC, MT, 40, 320, 330, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 8440, 8640, Compatible with John Deere Combine (s) 45, 55, 65, Replaces John Deere OEM number R26294, H31009, M263T, H24921, L4577T, N71260, P43392, R26531, R32653, RN268FN, T13149, T209T, Replaces Case IH OEM number 407010R1, I.D. (A): 2-1/4", O.D.: 2-5/8", Length: 3', For Hose Clamp use Item #: 130455, (Item #: 150819)$29.60
Radiator Hose Lower - Hose, radiator lower. For tractors: 3010, 3020, 4000 less AC, 4010, 4020 less AC. For 3010, 4010 (Item #: 114087, Ref: TP-R26472)$16.00
Radiator Hose Lower - New lower radiator hose with an inside diameter of 2" on the smaller side and 2.125" on the larger side. This radiator hose fits the John Deere Tractor 4000 and 4020 (SN 201000-> with air conditioning). (Item #: 123158, Ref: TP-R45982)$34.00
Thermostat Cover Gasket - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020, Compatible with John Deere Combine (s) 6600, 7700, Compatible with John Deere Engine (s) 254 (diesel), Replaces John Deere OEM number R42694, R26474, Sold individually, (Item #: 155332)$1.80
Thermostat Housing, Used - For John Deere tractor models 3010 (s/n 066500-later), 3020, 4000 (s/n 066500-later), 4010, 4020, 4040, 4230, 5010, 5020, 6030, Compatible with John Deere Construction and industrial models 500, 500A (s/n 152141-earlier), 500C, 510, 600, 700A, 760, 760A, Replaces John Deere OEM nos AR44840, Replaces John Deere Casting nos R41853, R42644, R39690, Aluminum Housing, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497296)$35.01
Water Pump - For tractor models 3010, 3020, 4000, 4010, 4020 All Diesel without AC. Replaces casting numbers R26337, R27547, R34977, R34982, R41315, R41318, R44122. Includes: hub, backplate, pump to backplate & backplate to block gaskets. (Item #: 101903, Ref: AR45332)$100.00
No Picture
Water Pump Bearing - WATER PUMP Bearing For 3010, 3020, 4000, 4010, 4020. For the following water pumps: AR31895 and AR34856. (Item #: 180171, Ref: TP-JD9212)$16.00
Water Pump Bearing - For tractor models 3020, 4000, 4020. Used on the following water pump: AR45332. (Item #: 180675, Ref: TP-JD9355)$18.30
Water Pump Gasket - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM number R26331, R521480, (Item #: 149876)$5.10
Water Pump Gasket - Plate to block - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Combine (s) 6600, 7700, Replaces John Deere OEM number R26341, (Item #: 155349)$3.00
Water Pump Gasket - Pump to plate - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Combine (s) 6600, 7700, Replaces John Deere OEM number R26343, (Item #: 155350)$2.60
No Picture
Water Pump - New - With Hub - Less Pulley For 3010, 3020, 4000, 4010, 4020, 4230 with Gas Engine (Item #: 112094, Ref: WP1483)$113.00
Water Pump Pulley Spacer - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM number R52833, Used with stamped steel pulley on water pump 112094 to gain housing to pulley clearance, Thickness: 0.135", ID: 3.234", Bolt Holes: 7/16", (Item #: 160479)$13.70
Water Pump Pulley - Tin, Used - For John Deere tractor models 4000, 4010, 4020, Compatible with John Deere Combine(s) 7700 (s/n 2801-11900), Replaces John Deere OEM nos R33380, AR40149, R40212, Tin Pulley, Diameter: 6 3/8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496615)$55.01
Water Pump, Remanufactured, AR45332, R34982 - For John Deere tractor models 3020, 4000, 4010, 4020 (all diesel), Replaces John Deere OEM number AR45332, Replaces John Deere Casting number R34982, R26337, R34977, R41315, R41318, R44122, Includes mounting gasket, For a new version of this sku use Item #: 155349, (Item #: 204225)$124.01
Water Pump, Remanufactured, R34979, R41316 - For John Deere tractor models 4000, 4020, Replaces John Deere Casting number R34979, R41316, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With pulley, (Item #: 205911)$150.01
Water Pump, Remanufactured, R45332, R44122 - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM number R45332, Replaces John Deere Casting number R44122, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Hub, (Item #: 205901)$124.01
No Picture
Water Pump Repair Kit - For 3020 SN# 123000 and up, 4000 and 4020 SN# 201000 and up. New water pump repair kit WITHOUT impeller that fits multiple John Deere Tractor or Combine models. This repair kit is for water pumps marked R44122, R41318, R41315. Please verify OEM part number BEFORE ordering. (Item #: WPK664)$37.66
Water Pump Seal Kit - For John Deere tractor models 1020, 1120, 3010, 3020, 4000, 4010, 4020, 4230, Compatible with John Deere Combine (s) 925, 935, 945, 955, 965, 965 (H), 968 (H), 975, 975 (HY4), 985, 985 (HY4), 1032, 1042, 1052, 1055, 1065, 1068 (H), 1072, 1075, 1075 (H4), 1085, 1085 (H4), 1177, 3300, 4400, 4420, 4425, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM number AR62933, AR41691, (Item #: 164007)$11.40
Decals and Emblems
Be Careful Plate - This Be Careful Plate is used on John Deere Tractors, 1961-1972. (Item #: 184329, Ref: R4475)$16.70
Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair.Replaces: AR28048, AR28049 (Item #: 101968, Ref: R2533)$150.00
Syncro-Range and Power Shift Decal Set - This Mylar set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Item #: 115031, Ref: AR52393)$52.00
Drive Train
Bearing Quill, Front, Used - For John Deere tractor models 500, 600, 3020, 4000 (s/n 262666-earlier), 4020, Compatible with John Deere Construction and industrial models 500A (s/n 152141-earlier), 500B, 500C, Replaces John Deere OEM nos AR32713, Replaces John Deere Casting nos R33486, Fits 540 and 1000 RPM PTO, Bearing Housing W/O Bearings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432097)$30.01
Countershaft Gear, Used - For John Deere tractor models 4000, 4020, 4230, Replaces John Deere OEM nos R33366, R51921, Syncro Range Transmission, 36 Teeth, 6 and 8 Speed, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498089)$147.01
Countershaft, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM nos R33365, R51921, Syncro-Range Transmission, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498981)$350.01
Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 119616, Ref: R31026)$99.00
Drum, Reverse Range - For tractor models 2510, 2520, 3010, 3020, 4010, 4000, 4020. Replaces R31027, R27726 and R52499. (Item #: 124958, Ref: R52499)$84.00
No Picture
Front Power Shift Pack, Remanufactured, AR53205 - For John Deere tractor models 4000, 4020 (s/n 201000-later), Replaces John Deere OEM number AR53205, Carefully Disassembled, Cleaned and Inspected, Universal hydraulic oil (5 gallon) use Item #: 120070, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200430)$4133.01
Low / High Range Drum, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 015963-earlier), 4230 (s/n 037595-earlier), 4320, 4430 (s/n 066737-earlier all with Syncro Range), Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 448D, Replaces John Deere OEM number R31026, For a new version of this item use Item #: 119616, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 419616)$39.60
Oil Pump - Syncro-Range Transmission - For John Deere tractor models 4000, 4020 (s/n 201000-later), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number AR41949, R40827, AR40670, Replaces Casting number R40637, Includes Gear Set And Cover Plate, (Item #: 157575)$300.00
Pinion, Low Range Synchro Transmission - This Low Range Synchro Transmission Pinion has 24 and 14 Teeth. It is used on John Deere 4000, 4020, 4230, 4430 All with Synchro Range Transmissions. Replaces R44637, R51518 and R59641 (Item #: 126970, Ref: R59641)$99.00
PTO Gear - For John Deere tractor models 2840, 3020, 3030, 3120, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R33339, (Item #: 121744)$193.00
No Picture
PTO Lower Gear - For John Deere tractor models 600, 4000, 4020, 4320, Replaces John Deere OEM number R39792, (Item #: 173937)$458.00
Rear Power Shift Pack, Remanufactured, AR89858 - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4230, Replaces John Deere OEM number AR89858, Carefully Disassembled Cleaned and Inspected, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200446)$2655.01
Reverse Range Shift Collar - This Reverse Range Shift Collar is used on John Deere 4000 and 4020 Tractors with Synchro Range Transmissions. Replaces original part number R33382 (Item #: 127292, Ref: R33382)$80.00
No Picture
Ring - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number R43752, (Item #: 150382)$17.80
Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 serial number up to 015963 syncro range), (4230 syncro range up to serial number 037595). Replaces R26074, R33383. (Item #: 127291, Ref: R33383)$91.00
Shift Collar, Planetary - For tractor models 4010, 4350, (4000, 4020, 4320 all syncro range), (4040, 4230, 4240, 4430 all syncro and quad range), (4440 quad range), (JD600 collar shift). (Item #: 125656, Ref: R26066)$104.00
Shifter Fork, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR46768, Replaces Casting nos R44995, Reverse Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498418)$55.01
Shift Fork, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos AR32179, Marker R33398, Syncro-Range, 1st and 3rd speed, 6th and 8th Speed, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497609)$55.01
Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro and quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 150072, Ref: R31028)$109.00
Transmission Clutch Collar, Used - For John Deere tractor models 4000 (s/n 201000-250000), 4010, 4020 (s/n 250000-earlier), Replaces John Deere OEM nos AR32182, AR26683, Replaces John Deere Casting nos R33402, R27301, Syncro-Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497640)$50.01
Transmission Drive Shaft - For tractor models 600 with collar shift transmission, 4000 and 4020 with synchro range transmission. (Item #: 108519, Ref: R33384)$399.00
Electrical System
Alternator - 12 volt, 78 amp. For tractor models (4000, 4020 SN# 263481 and up with air), 4030, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (4040 with out cab), (4050, 4250, 4450, 4650, 4850 with roll guard), (4620 SN# 014118 and up), (6030 with air), (7020 SN# 002264 and up), (8430 up to SN# 006278), (8630 up to SN# 008619). Replaces 8134664, 8982775005, JR775005, 10463060, 10463397, 10495429, 10497077, 1100257, 1101244, 1101298, 1100241, 1100246, 1100269, 10497074, 1101308, 1101241, 1101299, 1100237, 1100259, 1100270, 1100287, 1105047, 1105048, 1105049, 1101242, 1101245, 1101279, 1105427, 1105492, 1105495, 1105604, 1105606, 1105634, 1105648, 1105650, 1105673, 1105692, 1105426, 1105496, 1105632, 1105651, 1105425, 1105494, 1105620, 1105628, 1105629, 1105706 (Item #: 109805, Ref: TY6686)$142.00
Alternator - 12 volt, 72 amp. For tractor models (3300 with 219 DH03 or GH01 engine), (4000 up to SN# 263481 with air), (4020 SN# 201000-263481 with air), 4400, 55, 6622, 7700, (4520 with air), (4620 up to SN# 014117 with air), (6600 SN# 206201 and up), (6602 SN# 212801-353900), (6620, 7720, 8820 up to SN# 600000), (7020 up to SN# 002263), (7440 up to SN# 1000), (9910 SN# 3056 and up), (9920 up to SN# 380, (9940 up to SN# 1500). Replaces TY6603, AR43989, AH10552D. (Item #: 113321, Ref: TY24309)$213.00
Alternator - Motorola Style (7376) - For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, 7020, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 7722, 8820, Compatible with John Deere Harvester (s) 484, 499, 699, 7440, 9910, 9920, 9940, Compatible with John Deere Engine (s) 362, Replaces John Deere OEM number AH105520, AH80094, AH93616, TY6603, AR50909, AR52077, AH80093, Replaces Prestolite manufacturer number 110-115, 110-266, Replaces manufacturer number 10-115, 8MR2008P, 8MR2009P, 8MR2010P, 8MR2012P, 8MR2012PS, 7376, 210-145, 90-05-9063, Motorola Style, Voltage: 12, Rotation: Clockwise, Amperage: 72, Regulator: Internal, Without pulley, (Item #: 117401)$194.00
Battery Base - Left Hand, Used - For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR47940, Fits Left Hand Side, For a new version of this item use Item #: 167406, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454512)$41.01
Battery Box Base Tray - Left Hand - For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR47940, Fits Left Hand Side, (Item #: 167406)$74.00
Battery Box Base Tray - Right Hand - For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR47939, Fits Right Hand Side, (Item #: 167407)$72.00
Battery Hold Down Clamp - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4520, 4620, Compatible with John Deere Construction and industrial models 500A, 500B, 510, 570, Replaces John Deere OEM number R40423, (Item #: 151928)$11.60
Blower Motor - Stay cool by getting your air conditioning up and running. This Blower Motor is - double shaft - 12 volt single speed 2 wire motor with 5/16 inch shafts. Tractors: 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430 4WD, 8630. Replaces 916005, BM20013, RE223623, AR62497 (Item #: 109375, Ref: AR62497)$69.00
Clutch Housing Bottom Cover, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos R33403, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498946)$77.01
Distributor Cap - 6 Cylinder Prestolite - For John Deere tractor models 4000, 4010, 4020, 4230, Replaces John Deere OEM number AT14690, Prestolite distributor number (s): IBT6101, (Item #: 109897)$27.40
Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325)$18.00
Distributor, New - This new distributor is used on John Deere models 4000, 4010, 4020, and 4230 when replacing a Delco 1112581. Replaces OEM part number AR11146 (Item #: 133735)$303.00
No Picture
Distributor, Rebuilt - Complete remanufactured distributor for John Deere 4000, 4010, 4020, 4230 tractors with Delco distributor 1112581, John Deere part number AT416T. A refundable $75.00 core charge will be added to your order. (Item #: 205093, Ref: 1112581)$265.01
Distributor, Remanufactured, Prestolite, IBT-6101 - For John Deere tractor models 4000, 4010, 4020, Replaces Prestolite manufacturer number IBT-6101, For Tune-Up Kit use Item #: 109897, (Item #: 203994)$295.01
Push Button Starter/Horn Switch, Used - For John Deere tractor models 530, 630, 730, 830, 2510, 2520, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4630, 4640, 4650, 4760, 4840, 4850, 4960, 5010, 5020, 6030, 7520, 8020, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700, Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number AR21823, For a new version of this item use Item #: 121158, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421158)$5.01
Relay Solenoid Switch - For John Deere tractor models 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4230, 4430, 4630, 5020 (s/n 025000-later), 6030, 7020, 7520, Compatible with John Deere Combine (s) CTS, CTSII, 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9500, 9500 SH, 9510, 9510 SH, 9600, 9610, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 9900, Compatible with John Deere Construction and industrial models 400, 500B, 600 (s/n 201000-later), 644, 644A, 646, 646B, 700A, 740, 743, 760A, Compatible with John Deere Hay Cutting (s) 3830, Replaces John Deere OEM number AM53945, Voltage: 12, 3 Terminal, (Item #: 176330)$29.51
Rubber Grommet - For John Deere tractor models H, M, MC, MT, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 1350, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630, Replaces John Deere OEM number H987R, M305T, Can be used for hole in spark plug cover, fuel tank pads and electric wire grommet, (Item #: 126661)$1.80
Solenoid - Starter Solenoids. Solenoid assy~ base mount. services starter 1113672 on model 3020D, Serial Number 1T123000 and up~ 4030D, 4230D, Replaces Delco 1115510{D971}, AR77255. 620 (Orchard models with SN: 6223000 and up), 630, 730 (Gas and LP); 12 volt {B}. For 3020, 4030, 4230D. Replaces 1009784M91, 1017877M92, 1028587M91, AR11049, AR11050, AT11593, R11292. (Item #: 105672, Ref: 1115510)$27.50
Starter - 12 volt, 10 tooth, clockwise rotation, externally rotatable nose. For tractor models (105 1963 to 1970 with 404 diesel), (3020 1969 to 1972 with 270-4 cylinder diesel), (6602, 7700 1971 to 1974 with 404 diesel), (4000, 4020, 3020 1969 to 1972 with 404 diesel), (4030 1973 to 1974 with 329 diesel), (4230 1973 to 1975 with 404 diesel), (4320 1969 to 1973 with 404 diesel), (4430 1973 to 1975 with 404 diesel), (4520, 4620 1969 to 1973 with 404 diesel), (4630 1973 to 1975 with 404 diesel), (7020 1971 to 1975 with 404 turbo diesel). Replaces 1113656, 1113402, 1113672. (Item #: 102202, Ref: SDR0076)$315.00
Starter - Rebuilt Starter. Internally rotatable nose. Core Charge $80.00. For Diesel Tractors 3020 SN# 123000 and up, 4000, 4020 SN# 201000 and up, 4030, 4230, 4320, 4520, 4620, 7020. Starter Assembly with new solenoid for 12 volt system. Can replace original Delco 1113402, 1113672 and TISCO starter 83701-EX. (Item #: 203142, Ref: 1113402)$473.60
No Picture
Starter - Delco Style (4393), Remanufactured, Delco Remy, 1107522, TY26007 - For John Deere tractor models 3020 (s/n 130261-later), 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Combine (s) 55 (s/n 083001-later), 95, Compatible with John Deere Harvester (s) 99 (s/n H2248-H3653), Replaces John Deere OEM number TY26007, AR11305, AT15335, TY1456, TY6694, AR11161, SE501432, Replaces Delco Remy manufacturer number 1107522, 1107546, 1107578, 1109145, 12301338, Replaces manufacturer number 4393, Voltage: 12, Rotation: Clockwise, Teeth: 9, (Item #: 203471)$383.93
Starter - Denso Style DD (16635), Used - For John Deere tractor models 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 7020, 8430, 8440, 8450, 8560, 8640, 8650, Compatible with John Deere Combine(s) 985, 1085, 1085 (s/n 041200-earlier), 1177, 1188, 1188H4, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9500 SH, 9600, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 444, 444C, 444CH, 444D, 500A (s/n 123114-152141), 500B, 500C, 510, 544D, 644A, 644C, 644D, 646, 646B, 646C, 690, 690A, 690B, 693B, 740, 740A, 743, 743A, Compatible with John Deere Engine(s) 6076, 6329D, 6359A, 6359D, 6359T, 6414D, 6414T, 6466A, 6466A (s/n 067685-later), 6466D, 6466D (s/n 067685-later), 6466T, 6466T (s/n 067685-later), Replaces John Deere OEM number AR41627, AR55639, AR77254, RE13722, RE41875, SE501414, TY6617, TY6713, TY25960, Replaces Denso Mfg nos 028000-3290, 028000-3291, 028000-3292, 128000-0770, 128000-0771, 128000-0772, 9702800-329, 9712809-077, Replaces Mfg nos 16635, Denso Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, For a new version of this item use Item #: 203193, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403193)$154.01
Starter Switch, Used - For John Deere tractor models 820, 830, 920, 930, 940, 955, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester(s) 9900, Compatible with John Deere Construction and industrial models 300B, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR58126, For a new version of this item use Item #: 156037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456037)$9.01
Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Item #: 179443, Ref: AR48725)$31.00
Voltage Regulator - For tractor models (3020 with air), (4000, 4020 with air and SN# 250001-263481), (4320 with air and SN# up to 019504), (4520 with air), (4620 with air and SN# up to 014117), (5020 with air and SN# 030329 and up), (6030 with air), (7020 with air and SN# up to 002263), 350C, 350D, 355D, 450E, 455E, (544, 544A both Duboque SN# 121500 and up or Welland SN# 85200 and up), 550B, 555, 555B, (570, 570A with engine SN# 130706 and up), (644, 644A with engine SN# 280001 and up), (646 SN# up to 223644), 690, 690A, (690B SN# up to 003872), 693B, (740 with cab and SN# up to 003872), 180, 202, 303, 329DH, 329GH, 329HC, 329HF. Replaces AT29926. (Item #: 105709, Ref: AT56592)$10.00
Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Item #: 105708, Ref: AR78298)$37.00
Wire Harness - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4240S, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6020, 7020, 7520 (4WD), 8430 (4WD), 8440, 8630, 8640, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5820, (Item #: 159006)$8.60
Engine Bearings
Bearing Cone - For John Deere tractor models 2630, 2640, 4000 (s/n: 201999-earlier), 4020, 4230, Replaces John Deere OEM number JD8978, Bore: 1.000", Radius: .05", Width: 1.001", (Item #: 126931)$69.00
No Picture
Bearing Cup - BEARING CUP For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010 (Item #: 121349, Ref: 25521)$9.98
Camshaft Bearing - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (LP s/n 201000-earlier), 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8760 (s/n 500000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644, 644A, 644B, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 700, 700A, 740, 740A, 743, 743A, 762, 762A, 762B, 790, 790D, 792, 850, 850B, 855, 860B, 862, 890, 890A, Compatible with John Deere Engine (s) 201, 227, 254 (diesel), 270 (diesel), 362, Replaces John Deere OEM number R46903, Camshaft use Item #: 108146, (Item #: 106861)$6.10
Differential Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R66715, Beveled Teeth: 24, External Teeth: 47, Internal Splines: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498723)$150.01
Differential Side Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4400, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R54182, R63477, Use Thrust Washer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496839)$75.01
Differential Side Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R42446, Replaces Casting nos R26034, Does Not Use Thrust Washer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498725)$70.01
Lower Lift Link Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 6719-earlier), 4230 (s/n 13087-earlier), 4320, 4430 (s/n 17613-earlier), 4455, Replaces John Deere OEM number R54170, R26618, For a new version of this item use Item #: 164340, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436404)$4.32
No Picture
Main Bearing, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155963, Ref: AR74816)$6.98
Main Bearings - .010" Oversize - Set - For John Deere tractor models 4000, 4020, Compatible with John Deere Engine (s) 362 (gas), Replaces John Deere OEM number AR74816, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106830, (Item #: 106828)$41.15
Main Bearings - .020" Oversize - Set - For John Deere tractor models 4000, 4020, Compatible with John Deere Engine (s) 362 (gas), Replaces John Deere OEM number AR74817, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106830, (Item #: 106829)$72.00
Main Bearings - .030" Oversize - Set - For John Deere tractor models 4000, 4020, Compatible with John Deere Engine (s) 362 (gas), Replaces John Deere OEM number AR74818, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106829, (Item #: 106830)$72.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106835, Ref: MBK1437)$108.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106836, Ref: MBK1437-010)$112.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106837, Ref: MBK1437-020)$112.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106838, Ref: MBK1437-030)$112.00
No Picture
Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4020 (From S#201000) with 362 Gas Engine. Specify size in Comments box when ordering. (Item #: MS-1528P)$235.87
No Picture
Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4010, 4020, 4040, 4230 with 404 Diesel Engine (To EngS#214999) with Block #R40930& (From Eng S#215000) All. Specify size in Comments box when ordering. (Item #: R-AR74814S6)$167.11
Main Bearings - Standard - Set - For John Deere tractor models 4000, 4020, Compatible with John Deere Engine (s) 362 (gas), Replaces John Deere OEM number AR74814, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106830, (Item #: 106827)$72.00
No Picture
Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Item #: 166499, Ref: AR74814)$13.40
PTO Bearing Housing Cover Gasket - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 570, 570A, 600, 670, 670A, 672A, Replaces John Deere OEM number R33337, (Item #: 161849)$6.50
PTO Seal - For John Deere tractor models 830 (3 Cyl), 930, 1020, 1120, 1130, 1830, 2010, 2020, 2030, 2120, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020 (s/n 123000-later), 3030, 3120, 3130, 4000, 4020 (s/n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number RE13181, AT16431, AT167936, CR28669, (Item #: 121741)$9.70
Rear Transmission Cover Gasket - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, Compatible with John Deere Construction and industrial models 670B, 672B, Replaces John Deere OEM number R92411, R40947, R80965, (Item #: 169740)$14.10
Shim Kit - For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), 5020, Compatible with John Deere Construction and industrial models 700A, Replaces John Deere OEM number X741036, (Item #: 165767)$15.90
Throwout Sleeve - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4320, Replaces John Deere OEM number AR40572, Replaces John Deere Casting number R40734, (Item #: 165136)$363.00
No Picture
Thrust Bearing Set, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155964, Ref: AR77750)$13.98
Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). Thrust washers available as part number AR77747 (Item #: 166224, Ref: AR77748)$15.10
Transmission Case Cover Gasket - For John Deere tractor models 4000, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R33425, (Item #: 161858)$7.98
No Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 540D, 548D, 570, 570A, 610B, 640, 640 (s/n 314954 - later), 648D, 710B, Replaces John Deere OEM number R100234, R70251, R33166, R49295, R57915, R69587, (Item #: 115233)$10.80
No Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 570, 570A, 640, Replaces John Deere OEM number R100232, (Item #: 176674)$10.50
Engine Gaskets
No Picture
Crankshaft Seal, Front - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Item #: 106851, Ref: AR49025)$15.20
Crankshaft Seal, Rear - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Replaces RE520036, RE17352, RE22764, AR63095, RE14953, RE504363, RE530121 (Item #: 106856, Ref: RE22764)$32.00
Exhaust Manifold Gasket Set - For John Deere tractor models 4000, 4010, 4020, 4230, Replaces John Deere OEM number R83020, R83021, (Item #: 101605)$40.00
Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Item #: 106940, Ref: R-AR53631)$126.00
No Picture
Gasket Set - For tractor models 4000, 4020. (Item #: 106940, Ref: FS4221)$126.00
Head Gasket Set - For John Deere tractor models 4000, 4020 (s/n 201000-later), Compatible with John Deere Engine (s) 362 (gas), Replaces John Deere OEM number RE524100, (Item #: 106890)$351.00
Head Gasket Set - For John Deere tractor models 4000, 4020 (s/n 215000-later), Compatible with John Deere Combine (s) 6600, 7700, Replaces John Deere OEM number AR53630, Engine: D404 Diesel, Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 106892)$84.00
No Picture
Head Gasket Set - For 4000, 4020 (From S#201000) with 362 Gas Engine (Item #: HS3846)$103.47
No Picture
Head Gasket Set - For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Item #: R-AR53630)$101.20
Intake Manifold Gasket Set - For John Deere tractor models 4000, 4010, 4020, 4230 (all gas tractors), Replaces John Deere OEM number R227403, R26296, R26499, Kit includes: 3 manifold to cylinder head gaskets, 1 carburetor gasket, and 1 manifold to heat riser valve gasket, (Item #: 105501)$24.60
Liner Sealing Ring Kit - For John Deere tractor models 3010, 3020, 4000, 4010 (s/n 214999-earlier), 4020 (gas s/n 214999-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B (s/n 280000-earlier), 600 (s/n 214999-earlier), Compatible with John Deere Engine (s) 227, 6404D, Replaces John Deere OEM number AR40155, (Item #: 158867)$6.50
Oil Pan Gasket - Oil pan gasket. 1 set used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 1 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870 only, to SN# 200999); 1 used in 381 CID 6 cylinder diesel engine; 1 used in 404 CID and 466 CID 6 cylinder diesel engines (turbocharged and naturally aspirated).For tractor models 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Item #: 124046, Ref: TP-R71918)$14.30
Oil Pan Gasket Set - This Oil Pan Gasket Set is used on John Deere: 500 (Serial number below 280000 Early Power Booster 4.270 4CYL ENG), 500A, 500B, 500C (Serial number 280000 and up 4.270 4CYL ENG), 510 (SN 280000> 4.270 4CYL ENG), 600 (Serial Number below 214999), 3010 (Gas with Block number R26150), 3010 (Serial number below 280000 4.270 4Cyl Eng and Early Power Booster Eng), 3020, 4000, 4020 (GAS Serial number below 200999). Engines: 254D, 254D, 201, 270D, 270D, 270D, 254D, 227, 241, 227 (Item #: 106911, Ref: AR30544)$21.40
Oil Pan Gasket Set - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4230, Compatible with John Deere Combine (s) 6600, 7700, Compatible with John Deere Construction and industrial models 690, 690A, Replaces John Deere OEM number RE524085, AR30547, Engines: 301 Gas, 340 LP Gas, 341 Gas, 362 Gas, 381 Diesel, 404D Diesel, 404T Diesel, 466D Diesel, 466T Diesel, (Item #: 106912)$13.60
Rear Main Seal - For tractor models 4000, 4020 (From S#201000) with 362 Gas Engine. (Item #: 106856, Ref: SS46829)$32.00
Rear Main Seal - For 4000, 4020 before SN# 200999, both with 340 CID Gas. Replaces RE17352, AR63095, SS46821. (Item #: 106856, Ref: R-RE22764)$32.00
No Picture
Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Price shown is for each, sold only in multiples of 2 items. (Item #: 110545, Ref: TP-AR26480)$9.20
No Picture
Upper Gasket Set - Includes head gasket. For 4000, 4020 (Item #: HS4221)$107.82
Valve Cover Gasket - For John Deere tractor models 330, 770, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7710, 7800, 7810, 8100, 8200, 8210, 8300, 8400, 8410, 8440, 8450, 8560, 8570, 9100, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9510, 9550, 9600, 9610, 9650, 9660, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 6610, 6650, 7200, 9940, 9950, 9960, 9965, 9970, 9976, Compatible with John Deere Construction and industrial models 370, 644A, 644C, 644D, 644E, 644G, 644H, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 740, 740E, 743, 743A, 748E, 748G, 762A, 762B, 770A, 770B, 770C, 772A, 772B, 772CH, 790, 790D, 792, 850B, 850C, 892ELC, Compatible with John Deere Engine (s) 6381, 6466D, Replaces John Deere OEM number R49866, R26356, R32593, Additional Handling and Oversize Fees Apply To This Item, (Item #: 117939)$9.90
Engine Rebuild Kits
No Picture
Basic In-Frame Overhaul Kit - This In-frame engine kit is for the 404 CID 6 cylinder diesel engine with standard bore of 4 1/4 inch and engine serial number 215000 to 335845. Contains a 3 ring piston. For tractor models 4000, 4020. (Item #: 189531, Ref: BIFD4043)$1029.01
Basic Overhaul Kit - 6-Cylinder Diesel, 404 CID. 4-1/4 inch standard bore, 3-ring piston. Basic engine kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Ford Engine Serial numbers 215000 to 335845. For 4000 Series, 4020 Series. Bearings ordered separately. (Item #: 130702, Ref: BEKD4043-LCB)$1029.01
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 4000, 4020, 4040, 4230, 4520. Valve overhaul kit. Contains intake and exhaust valves, valve caps, springs, and keys. 1 kit used in 404 CID 6 cylinder diesel engine (s/n 215000 and up); 404 CID turbocharged diesel engine (to s/n 245546). (Item #: VOKD404B)$137.66
Cylinder Kit - For John Deere tractor models 510 (s/n 280000-later), 3020 (s/n 280000-later), 4000 (s/n 215000-335845), 4020 (s/n 215000-335845), Compatible with John Deere Combine (s) 6600 (s/n 215000-335845), 7700 (s/n 215000-335845), Compatible with John Deere Construction and industrial models 500A (s/n 280000-later), 500B (s/n 280000-later), 500C (s/n 280000-later), 510 (s/n 280000-later), 600 (s/n 215000-335845), Replaces John Deere OEM number RE23165, Order 4 or 6 for a complete engine, 6 Cylinder blocks marked R40610, R49620, R45950, R47170, R48440, 4.25" [108mm] Bore, 1.50" Piston Pin, 38mm, (Item #: 113907)$129.00
No Picture
Cylinder Kit - For John Deere tractor models 3020 (s/n 122999-later), 4000, 4020 (s/n 200999-later), 4040, 4230, Compatible with John Deere Combine (s) 105 (s/n 19000-later), 6600 (s/n 156500-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-later), 500B, 500C, 510, 600 (s/n 200999-later), Compatible with John Deere Engine (s) 270 (Diesel, 6 cylinder), 404 (Diesel, 6 cylinder), Kit includes: piston, piston rings, piston pin, cylinder liner, and cylinder liner seals, Bore: 4.250", Stroke: 4.750", All Hyper-formance pistons offer compression enhancement for improved engine starting, Hyper-formance cylinder kits offer a sensible solution to starting problems as well as long engine life, (Item #: 185590)$201.00
Engine Rebuild Kit - Less Bearings - ESN 215000-335845, 404, 6404D - For John Deere tractor models 4000, 4020 (s/n 201000-later), Compatible with John Deere Combine (s) 105 (s/n 19000-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Construction and industrial models 600 (s/n 200999-later), Compatible with John Deere Engine (s) 404 (diesel, s/n 215000-335845), 6404D (diesel, s/n 215000-335845), Replaces John Deere Block Casting number R40610, R40620, R45950, R47170, R48440, Bore: 4.250", Water pump bolts to head, Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel / air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106838, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130631)$1429.01
Engine Parts
1st and 3rd Speed Gear, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos AR32168, Replaces Casting nos R33367, Syncro-Range Transmission, 1st and 3rd Speed, Teeth: 48, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498979)$160.01
6th and 8th Speed Gear, Used - For John Deere tractor models 600, 4000, 4020, 4230, Replaces John Deere OEM nos R33388, Syncro-Range Transmission, 6th and 8th Speed, Teeth: 26, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498978)$125.01
No Picture
Bare Block, Remanufactured, R40670 - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4230, Compatible with John Deere Combine (s) 7700, Replaces John Deere Casting number R40670, Casting number (s): R40670, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204924)$2725.01
Brake Accumulator, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8430, 8440, 8450 (s/n 002369-later), 8630, 8640, 8650 (s/n 003438-later), 8850, Compatible with John Deere Harvester(s) 9940, Compatible with John Deere Construction and industrial models 340D, 440C, 440D, 448D, 500C, 510, 640D, 648D, Replaces John Deere OEM nos RE11956, AR67778, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498786)$400.01
Camshaft and Lifter Kit - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Engine (s) 6404A (s/n 335845-later), 6404D (diesel, s/n 215000-later), 6404T (s/n 335845-later), 6466A (s/n 67684-later), 6466D (non-turbo), 6466T (s/n 253372-later), Replaces John Deere OEM number AR100385, Replaces Block Casting number R44310, R45980, R47020, R47110, R49470, R49650, R59850, R72128, (Item #: 158278)$357.00
Camshaft Gear, Used - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000, 4010, 4020, 4020 (s/n 200999-earlier), 4230, 4320, 4520, Compatible with John Deere Construction and industrial models 500 (s/n 123113-earlier), 500A (s/n 123114-152141), 500C, 510, 644A, 690, 690A, Replaces John Deere OEM nos AR43594, R26077, Replaces Casting nos R43742, Inside Diameter: 1 5/16", Teeth: 46, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429969)$98.01
Camshaft, Remanufactured, AR100384 - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM number AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting number R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Engine (s): 6404, 6466 diesel, Cylinder: 6, Casting No. R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, (Item #: 204080)$216.01
Camshaft with Oil Pump Gear, Used - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM number AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting nos R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Engine(s): 6404, 6466 diesel, Cylinder: 6, Casting No. R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Used on engines with cam driven oil pump, For a new version of this item use Item #: 201080, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430220)$182.01
Camshaft without Oil Pump Drive Gear, Used - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM nos AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting nos R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Used on engines with crank driven oil pump, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430938)$163.01
Connecting Rod - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (s/n 200999-earlier), 4040, 4230, Compatible with John Deere Combine (s) 105 (s/n 3001-19000), 6600 (s/n 156500-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600 (s/n 200999-earlier), Compatible with John Deere Engine (s) 254 (diesel, s/n 49999-earlier), 270 (diesel, s/n 50000-later), 6381D (s/n 64999-earlier), 6404D (s/n 65000-later), Replaces John Deere OEM number AR70910, AR86981, Replaces John Deere Casting number R52225, R58880, R66923, R26047, 1.500" pin, For a Remanufactured version of this sku use Item #: 210057, (Item #: 128691)$87.00
Connecting Rod Bolt - It is important to change these any time the tension is released. This connecting rod bolt is only for connecting rods with casting number: R26047, R41423, R52285, R57303, R58880, R58882, R66922, R66923, R67320, or R71074. Check casting number before ordering. 2.484 inch long. Replaces R66452, R53290, R26325 (Item #: 113908, Ref: R66452)$3.60
Connecting Rod, Remanufactured, AR70910, AR86981 - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (s/n 200999-earlier), 4040, 4230, Compatible with John Deere Combine (s) 105 (s/n 3001-19000), 6600 (s/n 156500-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600 (s/n 200999-earlier), Compatible with John Deere Engine (s) 254 (diesel, s/n 49999-earlier), 270 (diesel, s/n 50000-later), 6381D (s/n 64999-earlier), 6404D (s/n 65000-later), Replaces John Deere OEM number AR70910, AR86981, Replaces Casting number R52225, R58880, R66923, R26047, For a New version of this sku use Item #: 128691, (Item #: 210057)$96.01
Connecting Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (s/n 200999-earlier), 4040, 4230, Compatible with John Deere Combine(s) 105 (s/n 3001-19000), 6600 (s/n 156500-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600 (s/n 200999-earlier), Compatible with John Deere Engine(s) 254 (diesel, s/n 49999-earlier), 270 (diesel, s/n 50000-later), 6381D (s/n 64999-earlier), 6404D (s/n 65000-later), Replaces John Deere OEM number AR70910, AR86981, Replaces Casting nos R52225, R58880, R66923, R26047, For a new version of this item use Item #: 210057, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498965)$50.01
Connecting Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM nos AR70909, R26046, AR86982, Replaces Casting nos R44257, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498753)$25.01
Connecting Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4020, 4230, Compatible with John Deere Combine(s) 6600, 7700, Replaces John Deere OEM nos AR86981, Marked R66923, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498841)$50.01
Crankshaft Dampener Pulley - For tractor models 4000, 4020 all SN# above 201000 with A/C. Crankshaft Dampener Pulley. (Item #: 164690, Ref: AR58176)$282.00
Crankshaft Pulley - For John Deere tractor models 3010 (Gas), 3020 (Gas and Diesel), 4000 (Gas), 4020 (Gas), 4230 (Gas), Replaces John Deere OEM number R53031, R47624, R34366, (Item #: 160790)$174.00
Crankshaft Pulley, Used - For John Deere tractor models 3010 (s/n 049999-earlier), 3020, 4000 (s/n 280001-later), 4020, 4230, Replaces John Deere OEM number R53031, R34366, R47624, For a new version of this item use Item #: 160790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498738)$106.20
Crankshaft Rear Seal Installer - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6620, 7020, 7700, 7720, 8430, 8440, 8450, Replaces John Deere OEM number R830476, (Item #: 180138)$245.00
Crankshaft, Remanufactured, AR50136, R40740 - For John Deere tractor models 4000, 4020 (diesel, s/n 201000-later), 4230, 4320, 4620 (diesel), Replaces John Deere OEM number AR50136, Replaces Casting number R40740, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished, For a New version of this sku use Item #: 102106, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200384)$980.01
No Picture
Crankshaft, Remanufactured, R78102 - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, Compatible with John Deere Combine (s) 6600, 6602, 6620, 7700, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, Replaces John Deere Casting number R78102, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 209959)$930.01
No Picture
Crankshaft with Bearings, Remanufactured, AR50136, R40740 - For John Deere tractor models 4000, 4020 (diesel, s/n 201000-later), 4230, 4320, 4620 (diesel), Replaces John Deere OEM number AR50136, Replaces Casting number R40740, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 210322)$1325.01
No Picture
Cylinder Block Kit - For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number AR73212, (Item #: 165066)$1499.01
No Picture
Cylinder Head, Remanufactured, AR48183 - For John Deere tractor models 600, 4000 (diesel s/n 201000-later), 4020 (diesel s/n 201000-later), Replaces John Deere OEM number AR48183, Replaces John Deere Casting number R40560, R46090, Diesel, Engine 404, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200333)$1825.01
Cylinder Head, Remanufactured, R40550 - For John Deere tractor models 4000, 4010, 4020, 4230, 4630 (Gas), Replaces John Deere Casting number R40550, R45180, R46080, Engine 362, Cylinders: 6, Casting No. R40550, R45180, R46080, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200329)$1825.01
No Picture
Cylinder Head, Remanufactured, R45190 - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4440, 4630 (Gas), Replaces John Deere Casting number R45190, Engines 341, 362, Cylinders: 6, Casting No. R45190 (w/ block no. R40940 R49550), Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200328)$790.01
Differential Pinion Gear - For John Deere tractor models 4000, 4020, 4050 (s/n 2725-later Power Shift), 4055 (86mm Axle), 4230 (s/n 26189-later With 51mm Wide Gear), 4240, 4250 (s/n 1000-later), 4255 (With 86mm Axle), 4320, 4430 (s/n 40771-later), 4455, Replaces John Deere OEM number R116821, R108996, R59929, Teeth: 21, Width: 2.010", (Item #: 125655)$236.27
Differential Pinion Gear - For John Deere tractor models 4000 (s/n 15452-earlier), 4020, 4230 (s/n 15452-earlier), 4320 (s/n 15452-earlier), 4430 (s/n 21269-earlier), 7520 (Front Axle Only), Compatible with John Deere Construction and industrial models 570, 600, 644, Replaces John Deere OEM number R33004, Teeth: 21, Width: 1.510", (Item #: 125657)$92.87
No Picture
Drum, High Range - For John Deere tractor models 2510, 2520, 3020 (U, s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4455 (Mexico), Replaces John Deere OEM number R63072, (Item #: 165807)$189.00
No Picture
Exhaust Valve Seat - For John Deere tractor models 600, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4250, 4320, 4440, 4450, 4520, 4620, Compatible with John Deere Combine (s) 6600, 6620, 6622, 7700, 7720, Compatible with John Deere Harvester (s) 5200, 5400, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 644A, 646, 646B, 690, 690A, Replaces John Deere OEM number R43681, (Item #: 167424)$9.20
Flywheel - With Ring Gear - 12 Square Pin Hole Style For 3010, 3020, 4000, 4010, 4020Diesel with Syncro Transmission. (Item #: 101907, Ref: R2323)$500.00
No Picture
Flywheel Dowel Pin - This Flywheel Dowel is used with AR40565 flywheel. Three used per tractor. Replaces R40731 (Item #: R40731)$38.89
No Picture
Flywheel With Ring Gear - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4020, Compatible with John Deere Construction and industrial models 500A (s/n 152141-earlier), 500B, 500C, 510, Replaces John Deere OEM number AR53380, AR34238, AR40563, Replaces John Deere Casting number R31638, R40729, R49529, Teeth: 129, Diesel, Power Shift Transmission, (Item #: 128160)$1169.01
Flywheel with Ring Gear, Used - For John Deere tractor models 500, 600, 3010, 3020, 4000, 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Construction and industrial models 500A (s/n 152141-earlier), 500B, 500C, 600, Replaces John Deere OEM number AR40565, Replaces Casting nos R40727, R28810, 12" flywheel, Diesel Engines, Teeth: 129, For a new version of this item use Item #: 101907, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401907)$305.01
Gear - 2nd and 5th, Used - For John Deere tractor models 600, 4000, 4020, 4230, Replaces John Deere OEM nos R33369, Syncro-Range Transmission, 2nd and 5th, Teeth: 42, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498977)$75.01
Gear 4th and 7th Speed Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4230, Replaces John Deere OEM nos R33370, R26818, Syncro-Range Transmission, Teeth: 33, 4th and 7th Speed, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498980)$75.01
No Picture
Gear - Transmission Clutch Oil Pump - For John Deere tractor models 2510, 2520, 3020 (s/n 122999), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 500C, 510, 540B, Replaces John Deere OEM number R48176, (Item #: 125908)$217.98
Head Bolt - For John Deere tractor models 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6620, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950, Compatible with John Deere Construction and industrial models 690B, 693C, 740, Replaces John Deere OEM number R88043, (Item #: 158360)$4.70
Head Bolt - For John Deere tractor models 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6620, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950, Compatible with John Deere Construction and industrial models 690B, 693C, 740, Replaces John Deere OEM number R88044, Diameter: 0.562", Thread: UNRC2A, Length: 6.280", Thread Length: 1.614", Body or Point Diameter: 0.504", Body Length: 0.331", (Item #: 158361)$5.10
Head Bolt - For John Deere tractor models 500, 3010, 3020, 4000, 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4955, 4960, 5720, 6620, 7020, 7720, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8960, Compatible with John Deere Combine (s) 1085, 1177, 1177H4, 1188, 1188H4, 6620, 6622, 7720, 8820, 9500, 9500 SH, 9600, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9940, 9950, 9960, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 540E, 548E, 640E, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 646C, 648E, 653E, 690, 690A, 690B, 690C, 693B, 693C, 740, 740A, 740E, 743, 748E, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, Replaces John Deere OEM number R88045, R62420, Diameter: 0.562", Thread: UNRC2A, Length: 7.402", Thread Length: 1.614", Body or Point Diameter: 0.504", Body Length: 0.331", (Item #: 158362)$7.00
No Picture
High Range Clutch Shaft, Used - For John Deere tractor models 600, 4000 (s/n 201000-later), 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 570, 570A, Replaces John Deere OEM nos AR46412, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445655)$332.01
High Range Pinion - For John Deere tractor models 4000, 4020, 4230, Replaces John Deere OEM number R41218, (Item #: 127293)$233.00
Intake Valve - For John Deere tractor models 3010, 3020, 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4440, 4450, 4520, Compatible with John Deere Combine (s) 6600, 6620, 6622, 7700, 7720, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644A, 690, 690A, Replaces John Deere OEM number R43883, 45 degree valve, (Item #: 166189)$14.70
Intake Valve Seat, Std - For John Deere tractor models 600, 3020, 4000, 4020, 4040, 4050, 4230, 4240, 4320, 4520, 4620, 7020, Compatible with John Deere Combine (s) 105, 6600, 6602, 6620, 7700, Compatible with John Deere Harvester (s) 5200, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 644, 644A, 646, 690, 690A, Compatible with John Deere Engine (s) 6404A, 6404T, 6466D, Replaces John Deere OEM number R43680, (Item #: 167188)$7.60
No Picture
John Deere, AR45275, R42293, Used - For John Deere tractor models 4000 (s/n 280000-earlier), 4010, 4020 (s/n 280000-earlier), Replaces John Deere OEM nos AR45275, Replaces John Deere Casting nos R42293, R44085, With end plug, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456927)$162.01
Lifter - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4450 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4650 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, and 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, and 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, and 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Item #: 112420, Ref: R52773)$7.80
Load Sensing Shaft - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, Replaces John Deere OEM number R46513, AR41773, 21.187" Long, 1.124" Diameter, (Item #: 112006)$86.00
Load Sensing Shaft, Used - For John Deere tractor models 4000 (from S/N 250001), 4020 (from S/N 250001), 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R46513, 21.187" Long, 1.124" Diameter, For a new version of this item use Item #: 112006, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412006)$44.01
Oil Filter Housing Cover - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM number R42054, (Item #: 163920)$104.00
Pinion - For John Deere tractor models 4000, 4020, 4230, Replaces John Deere OEM number R65342, (Item #: 126971)$127.00
Pinion Shaft Gear, Used - For John Deere tractor models 600, 4000 (s/n 201000-later), 4020, 4230, Replaces John Deere OEM nos R33387, Teeth: 34, Splines: 10, Rear, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433678)$75.01
Planetary Gear, Used - For John Deere tractor models 4000, 4020, 4050, 4230, 4250, 4430, 4450, Compatible with John Deere Combine(s) 9610, Replaces John Deere OEM number R116821, R108996, R59929, Teeth: 21, Width: 2", For a new version of this item use Item #: 125655, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425655)$25.01
Planetary Gear, Used - For John Deere tractor models 4000, 4020, 4230, 4320, 4430, 7520, Compatible with John Deere Combine(s) 7720, 7722, 8820, Replaces John Deere OEM nos R33004, Teeth: 21, Width: 1-1/2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498567)$40.01
Plate - Bottom Cast - For John Deere tractor models 4000, 4020, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R33552, R26657, R40732, Size: 12", (Item #: 114096)$99.00
Pulley, Crankshaft - Crankshaft Pulley. Used on John Deere 3010 gas, 3020 Gas and Diesel, 4000 Gas, 4020 Gas, and 4230 Gas. Replaces R47624, R34366 (Item #: R53031)$113.39
Push Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM nos AR40679, 10.875" Long, Gasoline Engines, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497766)$10.01
Push Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8310R, 8400, 8410, 8420, 8430, 8440, 8520, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620, Compatible with John Deere Combine(s) CTS, 6620, 6622, 7720, 8820, 9500, 9510, 9550, 9560, 9600, 9610, 9650, 9660, 9750, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 9940, 9950, 9960, 9965, 9970, 9976, 9986, 9996, Compatible with John Deere Sprayer(s) 4920, Replaces John Deere OEM nos R85027, R40680, 12.375" Long, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498958)$4.01
Rear Oil Seal Retainer Plate, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4050 (Engine s/n 243505-earlier), 4230, 4240 (Engine s/n 243505-earlier), 4250 (Engine s/n 243505-earlier), 4320, 4430, 4440 (Engine s/n 243505-earlier), 4450 (Engine s/n 243505-earlier), 4520, 4630, 4640 (Engine s/n 243505-earlier), 4650 (Engine s/n 243505-earlier), 4840 (Engine s/n 243505-earlier), 4850 (Rear Engine Oil Seal Housing For John Deere. Replaces R41406), 7020, 8430 (Engine s/n 243505-earlier), 8440, 8450 (Engine s/n 243505-earlier), Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940 (Engine s/n 243505-earlier), Replaces John Deere OEM nos R125027, R26057, Replaces Casting nos R78124, R115050, Aluminum Housing, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431260)$15.01
No Picture
Rear Oil Seal Retainer Plate, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4050 (Engine s/n 243505-earlier), 4230, 4240 (Engine s/n 243505-earlier), 4250 (Engine s/n 243505-earlier), 4320, 4430, 4440 (Engine s/n 243505-earlier), 4450 (Engine s/n 243505-earlier), 4520, 4630, 4640 (Engine s/n 243505-earlier), 4650 (Engine s/n 243505-earlier), 4840 (Engine s/n 243505-earlier), 4850 (Rear Engine Oil Seal Housing For John Deere. Replaces R41406), 7020, 8430 (Engine s/n 243505-earlier), 8440, 8450 (Engine s/n 243505-earlier), Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940 (Engine s/n 243505-earlier), Replaces John Deere OEM nos R41406, R26057, R78124, Cast Housing, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496616)$15.01
No Picture
Reverse Range Drive Collar, Used - For John Deere tractor models 600, 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4230, Replaces John Deere OEM nos R33711, Teeth: 24, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433680)$98.01
Reverse Range Pinion, Used - For John Deere tractor models 4000, 4020, 4230, Replaces John Deere OEM number R65342, For a new version of this item use Item #: 126971, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 426971)$72.01
Ring Gear And Pinion Set, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM nos AR33962, Replaces John Deere Casting nos R33062, R33243, Casting No. R33062 (Ring Gear), R33243, Teeth: 9 and 47, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499988)$350.01
Ring Gear And Pinion Set, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM nos AR32465, Replaces John Deere Casting nos R33006, R33062, Casting No. R33062 (Ring Gear), R33006, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499992)$375.01
Ring Gear, Flywheel - This Flywheel Ring Gear has 165 Teeth, 16.678 inch outside diameter, and 15.540 inch inside diameter. It is used on 3010, 3020, 4000, 4010, 4020, 4030, 4230, 500 Indust/Const, 500A Indust/Const, 500C Indust/Const, 510 Indust/Const, 600 Indust/Const, All with GAS or LP Engines. Replaces original part number R26054 (Item #: 121929, Ref: R26054)$99.00
Shift Arm, Used - For John Deere tractor models 4000, 4010, 4020, 4320, Replaces John Deere OEM nos R26497, R49207, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498831)$83.01
Shift Collar, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM number R33382, For a new version of this item use Item #: 127292, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427292)$49.01
Shifter Cam, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR32692, AR65493, AR74079, AR99412, RE46990, Replaces John Deere Casting nos R74252, R33400, R61107, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497642)$75.01
Shifter Cam, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM nos R26495, R33392, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498424)$75.01
Shifter Collar, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4455, Replaces John Deere OEM number R26066, Diameter: 5", For a new version of this item use Item #: 125656, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425656)$47.01
No Picture
Synchronizer Brake Drum - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R63073, (Item #: 165724)$222.00
Thrust Washer - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T/A 6cyl eng.), (4430 SN# 335845 and up 6.404T/A 6cyl eng.), (4440 6.466T SN# 253372 and less and 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.) (Item #: 168002, Ref: AR77747)$18.30
Timing Gear Cover, Used - For John Deere tractor models 3010 (s/n 049, 999-earlier), 3020, 4000, 4010, 4020, 4230, 4520 (s/n 303518-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, 510, 690, 690A, Replaces John Deere OEM nos AR69984, AR31934, AR44390, AR26636, AR31536, AR31537, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432361)$40.01
No Picture
Topshaft Assembly, Remanufactured, R33384 - For John Deere tractor models 4000, 4020, Replaces John Deere OEM number R33384, Uses 3 syncro drums, Assembly includes: top shaft, pinions, synchronizer, (Item #: 203977)$2178.01
Topshaft Assembly, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM number R33384, Uses 3 synchro drums, Assembly includes: top shaft, pinions, synchronizer, Updated Version, Uses 2 drums part numbers R63072 and R63073, For a Remanufactured version of this part use Item #: 203977, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430361)$1225.01
Topshaft Assembly, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM number R33384, Uses 3 synchro drums, Assembly includes: top shaft, pinions, synchronizer, Uses 2 drums part number R31026, Original Version, For a Remanufactured version of this part use Item #: 203977, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403977)$1300.01
Topshaft Clutch Disc Kit - For John Deere tractor models 2010, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230 (s/n 037595-earlier), 4320, 4430 (s/n 066737-earlier), Replaces John Deere OEM number RE37119, All with Syncrorange Transmission, Kit contains of 2 plates and 3 discs. 7520 calls for 3 plates and 4 discs (order 2 kits)., (Item #: 117082)$45.00
Transmission Drive Shaft Blocker, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM nos R52498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498828)$30.01
Transmission Drive Shaft Gear, Used - For John Deere tractor models 4000, 4020, 4230, Replaces John Deere OEM number R41218, R33371, Teeth: 23, High Range, For a new version of this item use Item #: 127293, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498555)$112.01
Transmission Drive Shaft Shift Collar, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, Replaces John Deere OEM number R33383, Inside Diameter: 1.62", Rear, Lo-High Range, Width: 1-1/4", For a new version of this item use Item #: 127291, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498556)$50.01
Transmission Input Shaft - For John Deere tractor models 4000, 4010, 4020, 4320 (All Syncro Range), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R34201, Length: 21.310", Tooth Splines: 19, (Item #: 114097)$232.00
Transmission Input Shaft Blocker, Used - For John Deere tractor models 2010 (s/n 42001-later), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R31028, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498442)$50.01
Transmission Input Shaft Blocker, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR77817, RE227962, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498443)$291.01
Transmission Input Shaft Syncronizer Drum, Used - For John Deere tractor models 2010 (s/n 42001-later), 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM nos R31027, R52499, Reverse Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498441)$69.01
Transmission Input Shaft, Used - For John Deere tractor models 4000, 4010, 4020, 4320 (All Syncro Range), Replaces John Deere OEM number R34201, Length: 21.310", Tooth Splines: 19, For a new version of this item use Item #: 114097, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414097)$75.01
Valve Cover, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, 4230 (s/n 432312-earlier), 4320, 4430 (s/n 432401-earlier), 4520, 4620, 4630 (s/n 432479-earlier), 4640 (s/n 001266-earlier), 4840 (s/n 001266-earlier), 7020 (s/n 432479-earlier), 8430 (s/n 001266-earlier), 8440 (s/n 001266-earlier), Compatible with John Deere Harvester(s) 5200 (s/n 432479-earlier), 5400 (s/n 432479-earlier), Compatible with John Deere Construction and industrial models 646, 646B, 690, 690A, 690B (s/n 424617-earlier), 740 (s/n 424617-earlier), Compatible with John Deere Engine(s) 6404A (s/n 432479-earlier), 6404T (s/n 432401-earlier), Replaces John Deere OEM nos AR26516, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432471)$40.01
Valve, Exhaust - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161171, Ref: R44175)$14.00
Valve, Intake - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161172, Ref: R44174)$13.00
Valve Keeper - For John Deere tractor models M, 40, 320, 330, 420, 430, 440, 520, 530, 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Construction and industrial models 500, 500A Replaces John Deere OEM number B367R, B200A, B6466A, , Compatible with Oliver tractor models Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 88, 550, 660, 770, 880, 1600 Replaces Oliver OEM number B6466A, , Compatible with White tractor models 2-44, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225, Replaces White OEM number B6466A, Sold per 1/2 valve, order 2 per valve, 3/8" stem, (Item #: 128577)$0.80
No Picture
Valve Lifter, Used - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4050, 4230, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (s/n 1974-1981), 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 1188, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier, 123114-152141), 500B, 500C, 510, 644A, 644C, 644D, 646, 646B, 646C, 653E, 690, 690A, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, 892DLC, Replaces John Deere OEM number R52773, For a new version of this item use Item #: 112420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451751)$2.01
Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 163383, Ref: R30939)$6.20
No Picture
Piston Sleeve - For tractor models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Item #: 167276, Ref: R32050)$46.10
No Picture
Sleeve Assembly (6 Required) - 4 1/4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Item #: R-RE23165)$163.01
No Picture
Sleeve Assembly (6 Required) - 4 1/4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) with Power Booster Pistons and All models with 6.404 diesel Engine (From Eng SN# 335845 and up) (Item #: R-RE23160)$184.18
Engine Rings
Piston Ring Set - Standard - 2 Cylinder - For John Deere tractor models 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4230, Compatible with John Deere Combine (s) 6602, 7700, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 600, Replaces John Deere OEM number AR54879, Fits John Deere Engine (s) 241, 362 (both gas), Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, (Item #: 129042)$72.98
Piston Ring Set - Standard - Single Cylinder - For John Deere tractor models 3010, 3020 (s/n 123000-later), 4000, 4010, 4020 (s/n 201000-later), 4040, 4230, Compatible with John Deere Combine (s) 6600, 6602, 7700, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 600 (s/n 201000-later), Compatible with John Deere Engine (s) 254 (diesel), 270 (diesel), 381 (diesel), 404 (diesel), Replaces John Deere OEM number AR65502, Bore: 4.250", Ring Size: Standard, Top Groove Size: .125", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, (Item #: 120936)$39.00
Piston Ring Set - Standard - Single Cylinder - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (all diesel), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510 (all diesel), Compatible with John Deere Engine (s) 254, 270, 381, 404 (all diesel), Replaces John Deere OEM number AR55630, Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chromed Cast Iron oil / Coiled Spring, Sold per cylinder, (Item #: 129022)$34.00
Piston Ring Set - Standard - Single Cylinder Set - For John Deere tractor models 3020 (s/n 123000-later), 4000, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 500, 500A (s/n 123113-later), 500B, 500C, 510, 600 (s/n 200999-earlier), Compatible with John Deere Engine (s) 270 (diesel), 404 (diesel), Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, 5th Groove Size: .250", 5th Groove Style: Cast Iron Oil, Sold per cylinder, (Item #: 129011)$27.98
Exhaust System
Chrome Curved Exhaust Stack 24 Inch - Double Walled, 24" Tall, 2 15/16" Flared I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 179459, Ref: R4264)$331.00
Exhaust Manifold Bolt Kit - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4320, 4520, 4620, 7020 (early), Compatible with John Deere Combine (s) 6600 (s/n 156500-later), 6602 (s/n 1500-earlier), 7700 (s/n 8000-earlier), Compatible with John Deere Harvester (s) 5200 (early), Compatible with John Deere Construction and industrial models 600 (s/n 200999-later), 644, 644A, 646, 690, 690A, Compatible with John Deere Engine (s) 301, 341, 362, 381, 404, Includes 8 bolts and washers, (Item #: 160831)$44.00
Exhaust Manifold, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4230, 4520, 4620, 7020, 7700, 7720, Compatible with John Deere Combine(s) 6600, 6620, 6622, Compatible with John Deere Harvester(s) 5200, 5400, Compatible with John Deere Construction and industrial models 644A, 646, 646B, 690, 690A, Compatible with John Deere Engine(s) 6404A, Replaces John Deere OEM nos R43167, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435054)$194.01
Exhaust Manifold, Used - For John Deere tractor models 4000, 4010, 4020, 4230 (Gas), Replaces John Deere OEM number AR28061, Replaces John Deere Casting nos R26358, For a new version of this item use Item #: 101606, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401606)$141.01
No Picture
Exhaust Stack - 2-15/16" FL X 48", Curved Chrome - For John Deere tractor models 3020, 4000, 4010, 4020, 4030, 4230, 4240, Inlet I.D.: 2-15/16" FL, Length: 48", John Deere Flared Inlet, Curved Stack - Black Finish use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114827)$200.00
Exhaust Stack - Curved Chrome - For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel), Style: Curved, Flared Inlet To Fit Manifold, O.D.: 5", Length: 38", Inner Liner, Chrome Plated, Straight Stack W/Liner use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115074)$290.00
Exhaust Stack - Straight Chrome - For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel), Style: Straight, Flared Inlet To Fit Manifold, O.D.: 5", Length: 38", Inner Liner, Curved Stack use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115075)$250.00
Intake Manifold - For 4000, 4010, 4020, 4230 all gas engine. (Item #: 101607, Ref: AR28062)$220.00
Intake Manifold, Used - For John Deere tractor models 4000, 4020 (s/n 28000-earlier), 4040, 4230, 4240, 4320, Compatible with John Deere Combine(s) 6600 (engine s/n 422365-later), 6620 (engine s/n 197682-earlier), 7700 (engine s/n 422365-later), Replaces John Deere OEM nos R46411, R130573, R134435, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498945)$176.01
No Picture
Manifold - For gas models:4000, 4010, 4020, 4230. Gaskets NOT included. (Item #: 101606, Ref: TP-AR28061R)$229.00
Manifold - For 4000, 4010, 4020, 4040, 4050, 4230, 4240, ALL with Diesel Engine. Exhaust Manifold replaces BMD# B-R26362. Does not come with gaskets. (Item #: 101609, Ref: R26362)$220.00
Manifold, Exhaust - For tractor models 4000, 4010, 4020, 4230 all with gas engine. Exhaust Manifold with gaskets. (Item #: 101606, Ref: AR28061)$229.00
Muffler - Vertical muffler~ oval body. Flared~ 2-1/4 exhaust outside diameter~ 27 body length. For tractor models: 3020 diesel tractor serial number 123000 and up, 4000 and 4020 diesel tractor serial number 201000 and up, 4030, 4040, 4230 diesel. For 3020, 4000, 4020, 4030, 4040, 4230 (Item #: 101190, Ref: TP-AR86595)$78.00
Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 5/8 Overall Length - 26 For 3010, 3020, 4000, 4010, 4020Gas and LP Gas3010 (To S#6643), 4010 (To S#7026)Diesel. OEM# AR26786, Use R1756 Clamp, Use R1804 Rain Cap (Item #: 101187, Ref: R1081)$67.00
Muffler - Vertical Exhaust Inlet Flared, Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4230 Diesel. OEM# AR86595, Use R2051 Clamp, Use R1801 Rain Cap and AR46323 Clamp. (Item #: 101190, Ref: R1085)$78.00
Muffler Clamp - Used with Mufflers R1083 and R1085, this two piece muffler clamp is used on the following John Deere models with flared muffler inlets: 4020, 500, 3010, 3020, 4000, 4010, 4030, 4230, 500A, 510, 570B, 570A, 4040, 4240, 4440. Replaces part numbers AR46323, DR-300, R32235 (Item #: 114772, Ref: AR46323)$19.30
Muffler Clamp Seal - For John Deere tractor models 2840, 2940 (s/n 452124-later), 2950, 2955, 3010, 3020, 3030, 3040 (s/n 452124-later), 3050, 3055, 3120, 3130, 3140 (s/n 452124-later), 3150, 3155, 3350, 3640, 4000, 4010, 4020, 4030, 4050, 4230, 4240, Replaces John Deere OEM number R227500, R31142, Gasket Between Muffler And Manifold, (Item #: 113524)$3.30
Muffler, Vertical - Oval body. Inlet 2-15/16 inch inside diameter, outlet 2-1/4 inch outside diameter, 27 inch overall length. For tractor models: 3020 gas serial number 123000 and up, 4000, 4020 gas serial number 201000 and up, 4230. (Item #: 101191, Ref: TP-AR41172)$86.00
Fuel System / Air Intake
Adjustable Load Needle - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off 90 degrees from the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 2.417 inches overall length, 1/2 - 20 thread size. (Item #: 112230, Ref: C71-59DC)$14.98
Adjustable Load Nozzle Assembly - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off opposite of the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 1.965 inches overall length, 1/2 - 20 thread size. Replaces AR46109, H21058, R13069, R13070, AR13029 (Item #: 112231, Ref: AR46109)$21.98
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794)$8.60
Air Cleaner Cup - Dry Type - For John Deere tractor models 4000, 4020 (all diesel), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R39827, (Item #: 127297)$110.44
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262)$6.00
Air Cleaner Pipe Grommet - This air cleaner pipe grommet has an inside diameter of 2.60 inches, outside diameter of 6.82 inches and is 2.37 inches tall. For tractor models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Item #: 125562, Ref: AR56061)$15.00
Air Precleaner Bowl - Clear plastic pre-cleaner bowl for air intake system. Dimension of bowl outside diameter at top: 10-1/2~ side height: 3~ cone inside diameter at top: 5-9/16~ overall height: 4. For diesel tractors: 4000, 4010, 4020, 5010, 5020 and 6030. For 4000, 4010, 4020, 5010, 5020, 6030 (Item #: 107972, Ref: TP-R28795)$9.80
Cable - Choke - For John Deere tractor models 3010, 3020 (s/n 122999-later), 4000 (s/n 201000-earlier), 4020 (s/n 201000-earlier), Replaces John Deere OEM number AR50707, AR27312, AR45736, Length: 40", (Item #: 161905)$29.60
Carburetor - This new carburetor replaces Marvel Schebler USX20, USX29, USX30, USX32, USX33, USX35, USX37, USX44, USX45SL, USX47SL, USX48SL and Zenith numbers 13320, 13430, 13450, 13750, 14990 and 15099. Assembled in the US, 1 year warranty. Delivery 2 to 3 weeks. (Item #: 104097, Ref: R4020)$730.00
Carburetor Float - For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Item #: 108455, Ref: AH10620)$23.50
No Picture
Choke Shaft Assembly Cast Zenith Deere - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Construction and industrial models 500 (s/n 123113-earlier), Replaces John Deere OEM number AR13026, Zentih 13429, 13430, (Item #: 118739)$180.00
Fiber Washer - Idler - For John Deere tractor models 3010 (Grove and Orchard, Row-Crop Standard and Utility Tractors), 3020 (s/n 122999-earlier, Utility), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4230, 5010, 5020 (s/n 024999-earlier), 5020 (s/n 025000-later), Replaces John Deere OEM number R26402, (Item #: 146688)$7.90
Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517)$32.00
Fuel Filter Body, Used - For John Deere tractor models 4000, 4020, 4520, 5010, 5020, Replaces John Deere OEM nos AR46144, AR46145, Replaces Casting nos R39531, R32151, R34754, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438259)$55.01
Fuel Injection Pump, Remanufactured, AR41626, Roosa Master, CBC633-1AL - For John Deere tractor models 600, 4000 (Power Shift s/n 201000-246722) (Syncro-Range s/n 201000-253763), 4020 (Power Shift s/n 201000-246722) (Syncro-Range s/n 201000-253763), Replaces John Deere OEM number AR41626, Replaces Roosa Master manufacturer number CBC633-1AL, CBC633-18AL, (Item #: 200695)$1835.01
Fuel Injection Pump, Remanufactured, AR48684, Roosa Master, CDC633-24AL - For John Deere tractor models 600 (s/n 246723-later, Collar Shift), 4000 (s/n 253764-later, Syncro-Range), 4020 (s/n 253764-later, Syncro-Range), Replaces John Deere OEM number AR48684, Replaces Roosa Master manufacturer number CDC633-24AL, (Item #: 200728)$1835.01
Fuel Injection Pump, Remanufactured, AR48803, Roosa Master, CBC633-28AL - For John Deere tractor models 600 (s/n 246723-later, Power Shift), 4000 (s/n 246723-280000, Power Shift) (s/n 253764-280000, Syncro-Range), 4020 (s/n 246723-280000, Power Shift) (s/n 253764-280000, Syncro-Range), Replaces John Deere OEM number AR48803, Replaces Roosa Master manufacturer number CBC633-28AL, (Item #: 200683)$1835.01
Fuel Injection Pump, Remanufactured, AR50145, SE501244, Roosa Master, JDB-2402 - For John Deere tractor models 4000 (s/n 208001-later), 4020 (s/n 208001-later), Replaces John Deere OEM number AR50145, SE501244, Replaces Roosa Master manufacturer number JDB-2402, Factory JDB Install, (Item #: 200727)$1350.01
Fuel Injection Pump, Remanufactured, AR50147, SE501244, Roosa Master, JDB-2404 - For John Deere tractor models 4000 (s/n 280001-later), 4020 (s/n 280001-later), Replaces John Deere OEM number AR50147, SE501244, Replaces Roosa Master manufacturer number JDB-2404, JDB633-2404, Both Power Shift and Syncro-Range, Latest Factory Powershift, (Item #: 200729)$1350.01
Fuel Injection Pump, Remanufactured, AR69413, SE500551, Roosa Master, JDB-2721 - For John Deere tractor models 600 (s/n 215000-later, Collar Shift), 4000 (s/n 215000-246722, Syncro-Range) (s/n 21500-253763, Power Shift), 4020 (s/n 215000-246722, Syncro-Range) (s/n 21500-253763, Power Shift), Replaces John Deere OEM number AR69413, SE500551, Replaces Roosa Master manufacturer number JDB-2721, JDB633-2721, CB Conversion Pump, (Item #: 200730)$1350.01
Fuel Injection Pump, Remanufactured, AR69414, Roosa Master, JDB633-2719, JDB-2719 - For John Deere tractor models 600 (s/n 215000-later, Power Shift), 4000 (s/n 246723-280000, Power Shift) (s/n 253764-280000, Syncro-Range), 4020 (s/n 246723-280000, Power Shift) (s/n 253764-280000, Syncro-Range), Replaces John Deere OEM number AR69414, Replaces Roosa Master manufacturer number JDB633-2719, JDB-2719, Field Update of CB Powershift, (Item #: 200731)$1350.01
Fuel Injector - For tractor models JD 3010, 3020, 4010, 4020 model tractors. Verify stamped number before ordering: Stamped number - Roosa Master: 17705, 18270, 18646, 18767, 20364, 20494. Replaces AR39811, AR46846, AR50781, SE501163. (Item #: 109653, Ref: AR50781)$32.00
Fuel Injector Boot, Pack of 12 - This is a fuel injector leak off boot. It is used on multiple John Deere diesel models. 1 used per injector. Price is for 12 boots. Replaces R34765 (Item #: 114213, Ref: R34765)$19.70
No Picture
Fuel Injector Boot, Used - For John Deere tractor models 510, 770, 3020, 4000, 4020, 4230, 4520, 5020, 6030, 7520, Compatible with John Deere Combine(s) 6600, 7700, Compatible with John Deere Harvester(s) 5200, 5400, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644, 644A, 644B, 646, 646B, 690, 690A, 700A, 760, 760A, 770, 770A, 772A, Replaces John Deere OEM number R34765, For a new version of this item use Item #: 114213, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435658)$6.01
Fuel Injector, Remanufactured, R50781 - For John Deere tractor models 3020, 4000, 4020, 4025, 4230, 4520, Replaces John Deere OEM number R50781, pencil # 17705, AR50781, This is a remanufactured injector, For a New version of this sku use Item #: 109653, (Item #: 204239)$182.01
No Picture
Fuel Line Clamp, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2240 (s/n 349999-earlier), 2355, 2510, 2555, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3155, 3255, 4000 (s/n 201000-later), 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5440, 5460, 5720, 5820, 7440, 7445, 7450, 7455, 9910, 9920, 9930, 9940, 9950, Compatible with John Deere Hay Cutting(s) 800, 830, 2250, 2270, 2320, 2420, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, 6700, Replaces John Deere OEM nos R34766, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448132)$1.51
Fuel Line - Filter to Injection Pump - For John Deere tractor models 4000, 4020, Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), 644A (engine s/n 280000-earlier), Replaces John Deere OEM number AR31553, Fuel Filter To Injection Pump, Tubing and fittings, (Item #: 162786)$41.00
No Picture
Fuel Line - Filter To Injection Pump, Used - For John Deere tractor models 4000, 4020, Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), 644A (engine s/n 280000-earlier), Replaces John Deere OEM number AR31553, For a new version of this item use Item #: 162786, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 450985)$23.24
Fuel Line - Return - For John Deere tractor models 4000 (Engine s/n 280001 - later), 4020 (Engine s/n 091000 - later), 4520 (Engine s/n 245535 - 303518), Compatible with John Deere Construction and industrial models 600 (Engine s/n 091000 - 214999), Replaces John Deere OEM number AR34807, (Item #: 158220)$39.41
Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3/8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Item #: 112524, Ref: TP-RE42211B)$24.40
Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656)$14.00
Fuel Tank - For tractor models 4000, 4010, 4020. Fuel Tank made of Poly Type Material. SEAL IS NOT AVAILABLE. Replaces AR39587 (Item #: 103947, Ref: AR38576)$510.00
Fuel Tank Strap, Upper, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM nos AR32217, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498626)$89.01
Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Item #: 111144, Ref: AR50041)$23.40
Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R)$18.20
Injection Line - #1 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51194, (Item #: 162788)$27.10
Injection Line - #2 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51195, For Cylinder #1 use Item #: 162793, (Item #: 162789)$25.60
Injection Line - #3 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51196, For Cylinder #5 use Item #: 162791, (Item #: 162790)$20.98
Injection Line - #4 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51197, For Cylinder #1 use Item #: 162793, (Item #: 162791)$23.60
Injection Line - #5 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51198, For Cylinder #1 use Item #: 162793, (Item #: 162792)$20.98
Injection Line - #6 Cylinder - For John Deere tractor models 4000 (engine s/n 280001-later, with Power Shift or Syncro), 4020 (s/n 201000-later, engine s/n 280001-later, with Power Shift or Syncro), 4520 (engine s/n 245535-303518), Compatible with John Deere Construction and industrial models 600 (engine s/n 215000-later), Replaces John Deere OEM number AR51199, For Cylinder #4 use Item #: 162789, (Item #: 162793)$27.20
No Picture
Injector Packing Washer - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020, 4000, 4020, 4030, 4520, Compatible with John Deere Combine (s) 3300, 4400, 4420, 6600, 7700, Replaces John Deere OEM number R34764, Inside Diameter: .380", Outside Diameter: .565", Thickness: .128", (Item #: 176691)$1.50
No Picture
Intake Pipe, Used - For John Deere tractor models 600 (s/n 201000-later), 4000 (s/n 201000-250000), 4010 (s/n 020787-later), 4020 (s/n 201000-250000), Replaces John Deere OEM nos AR39541, R31350, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443955)$100.01
Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R)$28.30
Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626)$18.00
Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R)$15.80
Fiber Optic Lead - This fiber optic lead is 8 inches long. It is used on the following tractors with side console: 2520, (3020 Serial Number 12300 and up), 4000, (4020 Serial Number 201000 and up), 4520. Replaces original part number AR48016 (Item #: 124181, Ref: AR48016)$29.50
No Picture
Fuel Sending Unit - Fuel Tank Sending Unit for tractor models (3020 Serial number 123, 000 and up), (4000 and 4020 serial number 201, 000 and up), 4320 and (Industrial 600 serial number 201, 000 and up). (Item #: 115547, Ref: AR46268)$48.00
Tach Drive Housing with 20 Tooth Gear, Used - For John Deere tractor models 3010 (Engine s/n 033000-later), 3020 (Engine s/n 033000-later), 4000, 4010 (Engine s/n 039500-later), 4020, 4230, 5010, 5020, 6030, Replaces John Deere OEM nos AR45953, R32426, AR26353, R26170, Uses 20 tooth gear R32426, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432275)$70.01
Tachometer Cable Core - For John Deere tractor models 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020, 4320, 4520, 4620, 7020, Compatible with John Deere Construction and industrial models 500, 500A, 600, Replaces John Deere OEM number AR28589, Length: 32.5", Square drive end: 0.104", Round end: 0.155", Round end shoulder: 0.200", (Item #: 121543)$21.50
Tachometer Cable, Used - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM number AR26721, AR28588, Length: 33-1/2", Load End: .78", Drive End: .55", Vinyl, For a new version of this item use Item #: 108041, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408041)$19.01
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (all with Syncro Range Transmission), Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number RE206855, AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, White Needle, Contains provision for back light, For a new version of this item use Item #: 121305, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499388)$119.01
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 5010, 5020, 6030 (all with Syncro-Range), Replaces John Deere OEM number AR50402, Includes Slot For A Bulb, For a Remanufactured version of this part use Item #: 207139, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407139)$158.01
No Picture
Tachometer Gauge, Used - For John Deere tractor models 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (all with Syncro Range Transmission), Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number RE206855, AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, Red Needle, Contains plug in back for fiber optic lights, For a new version of this item use Item #: 114510, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414510)$83.01
Tachometer Knob - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number AR40802, AR30282, (Item #: 126743)$11.00
Tachometer With Red Needle - This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas and Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855, AR50402 (Item #: 114510, Ref: RE206855)$130.00
Tachometer With Red Needle - This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 4000, 4520, 4620, (4020 up to serial number 250000), Industrial: 600. Replaces original part numbers: AR32827, AR39902, AR45445, AR48022, AR50403, AR50407, RE206857 (Item #: 114509, Ref: RE206857)$100.00
Tachometer With White Needle - This tachometer with white needle has the provision for illumination and fiber optics. It is used on the following Gas and Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855 (Item #: 121305, Ref: AR50406)$143.00
Tachometer With White Needle - This tachometer with white needle has a provision for illumination and fiber optics. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 4000, 4520, 4620, (4020 up to serial number 250000), Industrial: 600. Replaces original part numbers: AR32827, AR39902, AR45445, AR48022, AR50403, AR50407, RE206857 (Item #: 121303, Ref: AR50407)$115.00
Water Temperature Gauge - For tractor models 2520, (3020 SN# 123000 and up), 4000, (4020 SN# 201000 and up), 4320, 4520, 4620, 7020. (Item #: 108064, Ref: AR48640)$38.00
Hitch / Drawbar
Center Link Assembly - For John Deere tractor models 4000 (s/n 250001-earlier), 4020 (s/n 250001-earlier), 4230 (Hi-Crop), 4240 (Hi-Crop, s/n 006627-later), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop, s/n 013166-later), 8430, Replaces John Deere OEM number RE44560, (Item #: 170299)$175.00
Center Link Body - Part number R47067 measures 10.750 inches long. It has 1.375 inch -8 thread. Left hand thread on one side, right hand thread on the other. Used on John Deere: 4000 Serial Number 250001 and up, 4020 Serial Number 250001 and up, 4230 HI-CROP, 4320, 4430 HI-CROP, 4440 Serial Number 013166 and below, 4520 Serial Number 010019 and up, 4620, 4630 Serial Number 030390 and below, 5020 Serial Number 028137 and up, 6030, 7020, 7520. (Item #: 170285, Ref: R47067)$104.00
Center Link Body - For John Deere tractor models 2941, 2951, 3141, 3351, 3641, 3651, 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040 (s/n 002862-earlier), 4230, 4240 (s/n 006627-earlier), 4320, 4430, 4455, Replaces John Deere OEM number R51524, R47887, Length: 12.25", Thread: 1.375"- 8, UNC Left Hand/Right Hand, (Item #: 170290)$127.00
Center Link Body Only - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4020 (s/n 201000-later), 4030, 4230, 4520, 5010, 5020, Replaces John Deere OEM number R47524, R26811, Length: 10.75", Thread: 1.250"- 7, UNC LH/RH, (Item #: 170288)$104.00
Center Link Bracket, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, Replaces John Deere OEM nos R39759, R33860, Replaces Casting nos R31620, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498955)$25.01
Center Link End, Hook - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4320, 4430, 4440, Replaces John Deere OEM number AR61659, 1.375 " - 8 Right Hand UNC Thread, (Item #: 170270)$172.00
Center Link Handle - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548)$6.98
Draft Arm Assembly - Right Hand, Used - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4040S (s/n 347554-earlier), 4050, 4055, 4230, 4240, 4240S (s/n 347554-earlier), 4250, 4255, 4320, 4430, Replaces John Deere OEM nos AR80666, AR50955, AR65383, Overall Length is 41", Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497284)$349.01
No Picture
Draft Link, Early - Left Hand - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4320, Replaces John Deere OEM number AR65382, AR26945, RE44094, AR26554, Replaces John Deere Casting number R26907, R106780, (Item #: 165786)$440.00
No Picture
Drawbar - For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430, Replaces John Deere OEM number R80842, Offest without hammerstrap holes, Length: 45.00", Width: 2.50", Thickness: 1.375", 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front, (Item #: 108948)$154.00
No Picture
Drawbar - Straight 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430. (Item #: 108947, Ref: R3097)$117.00
No Picture
Drawbar - 2 Offset with Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Item #: 108521, Ref: R3098)$170.00
No Picture
Drawbar - 2 Offset without Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Item #: 178339, Ref: R3099)$218.00
Drawbar Hanger - Used on John Deere models 4000, 4020, 4040, 4230, 4320, 4430, 4455, this hanger is used with RE20663 and R80843 drawbars. (Item #: 108905, Ref: AR33911)$175.00
Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 and 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Item #: 121854, Ref: R81576)$140.00
Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 and 2.310 and 4.360 and 7.050 and 9.050 and 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. (Item #: 110260, Ref: RE20662)$165.00
Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Item #: 121855, Ref: AR27599)$43.00
Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728)$19.70
Drawbar Support Load Sensing Bushing - Used with AR76096 and AR83603 Front Drawbar Supports, this bushing replaces John Deere part numbers R71476 and R41084 (Item #: 168089, Ref: R71476)$23.10
Drawbar Support, Used - For John Deere tractor models 4000, 4020, 4040, 4230, 4320, 4430, 4455, Compatible with John Deere Combine(s) 7701, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number AR33911, Used With RE20663 and R80843 Drawbars, For a new version of this item use Item #: 108905, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408905)$107.01
Drawbar, Swinging - This Drawbar has a 2.50 Inch Offset, 45.00 overall length, 2.50 inches wide, 1.375 inches thick. Additional $10 shipping due to size and weight. Replaces original part numbers R34448, RE20663 (Item #: 108521, Ref: RE20663)$170.00
No Picture
Drawbar, Used - For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430, Replaces John Deere OEM number R80842SPL, Straight without hammerstrap holes, Length: 45.00", Width: 2.50", Thickness: 1.375", 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front, For a new version of this item use Item #: 108947, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436287)$76.01
Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503)$7.10
No Picture
Front Drawbar Dowel Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795)$11.51
Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189)$35.00
Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438)$7.30
Front Drawbar Support, Used - For John Deere tractor models 4000, 4020, 4040, 4230, 4320, 4430, Replaces John Deere OEM nos AR83603, AR57097, AR60944, Replaces Casting nos R65533, R53559, R53561, R65535, R53560, R52474, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499631)$540.01
Front Pull Arm Pin, Used - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, For a new version of this item use Item #: 114090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435641)$7.01
Front Pull Arm Washer - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442)$14.10
No Picture
Front Pull Arm Washer, Used - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774)$8.26
Hydraulic Cylinder Hanger, LH, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 5020, Replaces John Deere OEM nos R32118, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498953)$20.01
Load Control Arm Support, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R51195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431755)$25.01
Load Control Shaft - For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), Replaces John Deere OEM number R33826, 21.62" Long, 1.124" Diameter, (Item #: 111936)$120.00
Load Control Shaft Bushing - For John Deere tractor models 4000 (s/n 250000 - earlier), 4010, 4020 (s/n 250000 - earlier), 5010, 5020, Replaces John Deere OEM number R26505, 1.565" O.D., Includes o-ring A3606R, (Item #: 118282)$22.70
Load Control Shaft Bushing and O-Rings - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6030 (s/n 33766-later), Replaces John Deere OEM number AR54481, Includes R53177 Back-up Ring and R53180 O-Ring, Sold individually, For Load control shaft use Item #: 112006, (Item #: 128537)$35.00
No Picture
Load Control Shaft Bushing with O-Ring - For John Deere tractor models 4000 (s/n 250001-later), 4020, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R54785, OS: .020", (Item #: 176696)$25.60
Load Control Shaft Seal - For John Deere tractor models 4000 (s/n 250000 - earlier), 4010, 4020, Replaces John Deere OEM number AR84792, Sold individually, (Item #: 118283)$8.50
Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558)$8.70
Lower Lift Link Pin - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 6719-earlier), 4230 (s/n 13087-earlier), 4320, 4430 (s/n 17613-earlier), 4455, Replaces John Deere OEM number R54170, R26618, (Item #: 164340)$7.20
Pin, Front Pull Arm - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Mexico), Compatible with John Deere Harvester (s) 740, 9940, 9950, Replaces John Deere OEM number R53558, (Item #: 170292)$21.10
Pull Arm End - Left Hand - For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, Replaces John Deere OEM number RE44094, AR26554, Replaces John Deere Casting number R106781, R26907, Casting No. R26907, R106781, Left Hand, Category 2, (Item #: 112556)$160.00
Pull Arm End - Right Hand - For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, Replaces John Deere OEM number AR26555, RE44093, Replaces John Deere Casting number R106780, R26911, Casting No. R26911, R106780, Right Hand, Category 2, (Item #: 112557)$153.00
Pull Arm Latch - For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Item #: 108518, Ref: AR90082)$60.00
Rockshaft - For tractor models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Item #: 172658, Ref: R56175)$283.00
Rockshaft Cover Shield - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 154194, Ref: R41663)$28.00
Rockshaft, Used - For John Deere tractor models 600, 2420, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R34487, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433683)$95.01
Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Item #: 108936, Ref: R3139)$66.52
Sway Block, LH - This Left Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. Replace R39513 (Item #: 108936, Ref: R39513)$66.52
Sway Block, RH - This Right Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. It Replaces R39512 (Item #: 108937, Ref: R39512)$53.00
Sway Block - Right Hand, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4455, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R39512, R33862, Right Hand, For a new version of this item use Item #: 108937, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499872)$35.01
Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R)$12.00
Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R)$1.50
Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R)$1.40
Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R)$2.70
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716)$0.80
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R)$0.70
No Picture
Toplink Assembly - For John Deere tractor models 3020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4000 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4040 (s/n 002862-earlier), 4050 (s/n 001000-later), 4230 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4240 (s/n 006627-earlier), 4250 (s/n 006136-later), 4255, 4430, 4455, Replaces John Deere OEM number AR34209, AR50643, AR61659, R51524, R42495, Link Ends Have 1 3/8" Thread, Front Link End Has 1" Pin Hole, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102056)$176.00
Top Link Ball, Category I - This is a Category I Ball for a 2 inch socket and 3/4 inch pin. It is used with AR34208 top link. Replaces F2680R (Item #: 121860, Ref: F2680R)$6.80
Top Link Ball, Category II - This is a Category II Ball for a 2 inch socket and 1 inch pin. It is used with AR34208 top link. Replaces F2681R (Item #: 111379, Ref: F2681R)$3.98
Top Link (Center Link) End - For John Deere tractor models 2510, 2520, 3020, 4000, 4020 (s/n 250000-later), 4030, 4230, Compatible with John Deere Construction and industrial models 500, 600, Replaces John Deere OEM number AR32531, Front (tractor side) center link end, Length: 9.750", Thread: 1.125" - 7 LH UNC, Pin Hole Diameter: .875", (Item #: 121858)$105.01
Top Link (Center Link) Pivot Pin - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, Compatible with John Deere Construction and industrial models 500, 500A, 600, Replaces John Deere OEM number AR67880, Length: 4.803", Diameter: .875", (Item #: 121859)$20.30
Top Link End - Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Item #: 110204, Ref: AR46298)$99.00
Top Link End - Measuring 8.500 inches long, with 1.375 inch -8 Left Hand UNC Thread and a 1 inch hole diameter, this part replaces John Deere part numbers AR50643. It is used on John Deere models: 2941, 2951, 3141, 3351, 3641, 3651, 4000, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Verify measurements before ordering. Some of these models used more than one size. (Item #: 110318, Ref: AR50643)$116.00
Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762)$5.90
Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557)$6.40
Discharge Valve - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 5010, 5020, Replaces John Deere OEM number R27154, (Item #: 118793)$18.00
Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362)$15.40
Hydraulic Pump - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200413, (Item #: 115599)$1009.01
Hydraulic Pump Drive Bushing - For John Deere tractor models 1020, 1520, 1830, 2020, 2030, 2040, 2130, 2510, 2520, 3020, 3030, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine (s) 2240, 9400, Compatible with John Deere Harvester (s) 9940, Replaces John Deere OEM number AR49427, R45822, AR34098, For Set of 4 use Item #: 111302, (Item #: 108934)$1.90
Hydraulic Pump Drive Coupler Set, Used - For John Deere tractor models 1830, 2030, 2130, 2840, 3020, 3030 (s/n 311078), 3130 (s/n 311078), 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8630, 8640, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 401C, 410, 440C, 444, 450, 500, 500A, 500B, 500C, 510, 540, 540B, 570, 600, 640, 644, 646, 670, 670A, 672A, 700, 740, 760, 762, 770A, 772A, Replaces John Deere OEM nos R34362, Set includes 2 of Part No. R34362, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414098)$15.01
Hydraulic Pump Drive Coupler, Used - For John Deere tractor models 4000 (s/n 210238-later), 4020 (s/n 210238-later), 4030, 6030, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT42312, R43829, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498364)$178.01
No Picture
Hydraulic Pump Drive Pin, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Harvester(s) 9940, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 310, 380, 400, 401, 401B, 401C, 410, 440, 440C, 444, 480, 480C, 500, 500C, 510, 540, 540B, 544, 570, 600, 640, 644, 646, 670, 700, 740, 760, 762, 770, Replaces John Deere OEM number R34360, Threads Into Coupler End, For a new version of this item use Item #: 108512, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435397)$1.98
Hydraulic Pump Drive Shaft Coupler, Used - For John Deere tractor models 3020, 4000, 4020, 5010, 5020, Compatible with John Deere Construction and industrial models 400, 500, 600, 670, Replaces John Deere OEM number R34359, AT42311, Length: 4.370", Splines: 14, For a new version of this item use Item #: 108933, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408933)$40.01
Hydraulic Pump, Remanufactured, AR101807 - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 115599, (Item #: 200413)$1223.01
Hydraulic Pump, Remanufactured, RE20839 - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number RE20839, AR94661, R71587, Top Inlet: 7/8", Right Inlet: 1-1/16", Discharge: 1-1/16", Left Inlet: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 112640, (Item #: 200415)$1566.77
Hydraulic Pump, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4850, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos AR46246, AR94661, AR99839, AR70722, AR73106, Top Inlet: 7/8", Right Outlet: Plugged, Left Inlet: 1-1/16", Discharge: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405068)$890.01
Hydraulic Pump, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520 (Syncro and Quad Range), Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", Right Inlet: 1-1/16", Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 200411, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400411)$680.01
Pressure Control Valve Assembly, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, 7020, 7520, Replaces John Deere OEM nos R40999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497639)$25.01
Rockshaft Lift Arm, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R41565, R51130, For a new version of this item use Item #: 172658, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498457)$165.01
Selective Control Valve Lever - For John Deere tractor models 2520, 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR40991, (Item #: 115456)$131.00
Selective Control Valve, Remanufactured, AR40827 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR40827, 1st or 2nd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203666)$1350.01
Selective Control Valve, Remanufactured, AR40827 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR40827, 1st or 2nd Valve with ISO style couplers, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203717)$1420.01
Selective Control Valve, Remanufactured, AR44130 - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number AR44130, 3rd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203667)$1583.01
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116)$14.00
Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1)$5.40
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250)$25.30
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91)$9.30
Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Item #: 123453, Ref: T12443)$45.00
Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Item #: 123454, Ref: R27460)$13.40
Light Switch - 4 position, 9 terminal, .50 inch thread dia. For tractor models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), 4000, (4020 SN# 91000 - 250000), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Item #: 113307, Ref: AR41288)$26.20
Light Switch, 4 position - 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Item #: 121802, Ref: AR48724)$22.60
Light Switch Knob - Use with AR48724 light switch. For tractor models (2520, 2750 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4030, 4230, 4320, (4520 from SN# 142450 and up), 4620, 4630, (5020 with cab). Replaces AR54445. (Item #: 126563, Ref: R46092)$10.80
Light Switch Knob - For tractor models 1010, 2010, 2510, (2520 up to SN# 22000), (4000, 4020 up to SN# 250000), 4010, (4520 up to SN# 142449), 5010, (5020, 6030 without cab). Replaces R27963. (Item #: 126564, Ref: AT65316)$13.50
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357)$18.70
Brake Valve Overhaul Kit - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 ('74 - '81), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 540, 540A, 570, 570A, 600, 670, 670A, 672A, 700A, 760, 770A, 772A, Replaces John Deere OEM number AR30687, AR31946, (Item #: 115353)$36.00
No Picture
Bushing - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 410B, 410C, 410D, 415B, 440, 440A, 440B, 510C, 510D, 515B, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C, Replaces John Deere OEM number R34612, R79078, R67876, (Item #: 167311)$13.20
No Picture
Bushing with O-Ring - For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), 5010, 5020, Compatible with John Deere Construction and industrial models 700A, Replaces John Deere OEM number R45515, Bushing is .003 oversize, (Item #: 176683)$12.00
No Picture
Bushing with O-Ring - For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), Replaces John Deere OEM number R45516, Bushing is .006 oversize, (Item #: 176684)$13.50
No Picture
Bushing with O-Ring - For John Deere tractor models 4000 (s/n 250000-earlier), 4010, 4020 (s/n 250000-earlier), Replaces John Deere OEM number R46801, (Item #: 176685)$44.00
Cab Fan Motor, Used - For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8630, Replaces John Deere OEM nos AR74019, Includes Motor Fan and Housings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498774)$204.01
Cab Foam Floor, Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (for use with open deck with side console), Color: Black, Kits are computer cut to assure accuracy, (Item #: 112930)$130.00
Cab Foam Floor Mat - Hinson Cab - Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Factory Hinson Cab), Color: Black, Kits are computer cut to assure accuracy, (Item #: 112924)$147.00
No Picture
Cab Foam Floor Mat - Year-A-Round Cab - Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Year-A-Round Cab), Color: Black, Kits are computer cut to assure accuracy, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112927)$214.00
Cab Foam Kit - 7-Piece - Black For tractor models with Hinson Cab. (Item #: 112923, Ref: R3247)$346.00
No Picture
Frame Rail, LH - For tractor models 4000, 4010, 4020. OEM# R2655. ADDITIONAL $20 SHIPPING DUE TO WEIGHT. (Item #: R2655-AI)$390.12
Hydraulic Pump Support, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 5010, 5020, 6030, Replaces John Deere OEM nos R46774, R34358, R27480, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499539)$150.01
No Picture
Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 109374, Ref: R3058)$208.00
No Picture
Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 108910, Ref: R3059)$320.00
Lever and Linkage Kit - 2nd Valve - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, For 2nd Valve, (Item #: 121334)$657.01
Lever and Linkage Kit - 3rd Valve - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, For 3rd Valve, (Item #: 121335)$305.00
Oil Transmision Filter Cover, Used - For John Deere tractor models 820, 830, 920, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2130, 2510, 2520, 2630, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 7020, 7520, 8430, 8630, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos R39796, R34290, Depth: 4-1/4", Diameter: 5-1/2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498835)$30.01
Park Release Spring, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Replaces John Deere OEM nos AR49457, AR31649, For Syncro Range Transmission, Has 3/8" Threaded Rod, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499867)$40.01
SCV Operating Arm - For John Deere tractor models 2520, 3020 (s/n 123000-later North American Edition), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number R41122, (Item #: 115144)$57.00
No Picture
Seal - For John Deere tractor models 2510, 2520, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R44815, (Item #: 167296)$9.98
Shifter Fork, Used - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos AR32180, Replaces John Deere Casting nos R33399, R72600, Quad and Syncro Range, 2nd and 5th, 4th and 7th Speed, B and C Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498420)$100.01
Shift Quadrant, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Replaces John Deere OEM nos AR33935, AR45342, AR44270, Speed Range, Syncro, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497613)$50.01
Shift Quadrant, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Replaces John Deere OEM nos AR44263, AR45240, AR26361, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497614)$95.01
Transmision Oil Filter Cover, Used - For John Deere tractor models 500, 600, 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4230, 4430, 4520, 4620, 4630, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 448D, 500A (s/n 152141-earlier), 500B, 500C, 510, 540, 540A, 540B, 540D, 548D, 570, 570A, 570B (s/n 011725-earlier), 640, 640D, 648D, Replaces John Deere OEM number R39794, R26319, Aluminum, For Cast version use Item #: 496829, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498836)$30.01
Transmission Oil Filter Cover, Used - For John Deere tractor models 2520, 4000, 4020 (s/n 20100-Later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM nos R58652, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496828)$40.01
Oil System
Engine Oil Pan, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM nos AR34405, AR27558, Replaces John Deere Casting nos R27185, R34737, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430405)$195.01
Hydraulic Oil Cooler Reservoir - For John Deere tractor models 4000 (Syncro s/n 250001-later), 4020 (Syncro s/n 250001-later), 5010, Replaces John Deere OEM number AR50592, (Item #: 109705)$571.44
Hydraulic Oil Cooler, Used - For John Deere tractor models 4000 (s/n 217838-earlier), 4010 (s/n 024944-later), 4020 (s/n 217838-earlier), 5010, Replaces John Deere OEM nos AR31151, With Bypass Valve, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498962)$410.01
Hydraulic Oil Cooler, Used - For John Deere tractor models 3010 (s/n 049999-earlier), 3020 (Syncro all, Powershift s/n 109411-later), 4000 (s/n 250001-later), 4020 (s/n 250001-later), Replaces John Deere OEM number AR44283, All With Powershift Transmission, Refer to pictrure for reference of thickness of oil cooler compared to item # 409704, For a new version of this item use Item #: 109704, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496723)$339.01
Oil Cooler - For tractor models (6600, 7700 SN# 215000 and up with 6.404D 6 cyl engine), (600, 4000, 4020 up to SN# 335845 with 6.404D engine), (4010 SN# up to 214999), (4040, 4230 SN# 335845 and up), (6600, 7700 SN# 335845 and up with 6.404T/A). (Item #: 124050, Ref: AR55394)$148.00
Oil Cooler - Hydraulic - For John Deere tractor models 3010 (s/n 049999-earlier), 3020 (Syncro all, Powershift s/n 109411-later), 4000 (s/n 250001-later), 4020 (s/n 250001-later), Replaces John Deere OEM number AR44283, For tractors with separate oil coolers, The application information is based upon the original configuration of the tractor as it was new from the factory. While the serial number will tell you what the tractor came out with originally, many models have already been updated, therefore make sure you know the style of cooler you are dealing with prior to purchasing. Additionally some minor modifications may be necessary when mounting these components on some models. However, these modifications are the same as would be necessary when using genuine OEM parts., (Item #: 109704)$546.00
Oil Cooler O-Ring - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7800, 8100, 8300, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9600, Compatible with John Deere Harvester (s) 5440, 5460, 5720, 5730, 9940, 9950, 9960, 9965, Compatible with John Deere Construction and industrial models 600, 644, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 690, 690A, 690B, 690C, 693C, 740, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 770A, 770B, 770BH, 772B, 772BH, 790D, 792D, 792LC, 850B, 850C, 892E, 892LC, Replaces John Deere OEM number R47153, R50420, Inside Diameter: .984", Nominal Section: .139", Standard Number Size: 214, Durometer: 65, Material: H4P, (Item #: 167363)$1.70
Oil Cooler, Used - For John Deere tractor models 3020, 4000, 4020, 4230, Replaces John Deere OEM nos AR32694, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498743)$163.01
Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Item #: 109417, Ref: AR26350)$12.27
Oil Filter Canister, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM nos R26166, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498704)$82.01
Oil Filter Cover, Used - For John Deere tractor models 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4230, Replaces John Deere OEM nos R42054, R27261, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498957)$65.01
Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Item #: 121439, Ref: AR27977)$10.50
Transmission Oil Filter Cover, Used - For John Deere tractor models 2520, 3800, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4955, 4960, 5010, 5020, 6030, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R63093, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498814)$65.01
PTO / Driveline
Backrest Support, Used - For John Deere tractor models 820, 830, 2510, 2520, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 9370R, Compatible with John Deere Construction and industrial models 570, 570A, 600, 670, 670A, 672A, 690, 690A, 690B, 700, 760, 760A, 770, 770A, 772A, Replaces John Deere OEM number R34272, For a new version of this item use Item #: 109347, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430331)$14.51
Needle Bearing - For John Deere tractor models 1020, 1520, 2020, 2030, 2440 (s/n: 340999-earlier), 2510, 2520, 2630, 2640 (s/n: 340999-earlier), 3020, 4000, 4020, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 440, 440A, 440B, 500, 500A, 500B, 510, 540, 540A, 600, 644B, 644C, 646C, 760A, Compatible with John Deere Lawn and Garden (s) 110 (s/n: 3571-earlier), 110 (H, s/n: 3571-earlier), Replaces John Deere OEM number 368372R91, A57046, G13604, 18-693, 142090, 18-1643, (Item #: 176563)$3.24
No Picture
PTO Clutch Sleeve, Used - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4320, Replaces John Deere OEM nos R40736, R52735, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496581)$129.01
No Picture
PTO Clutch Valve Housing, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4320, 4520, 4620, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, Replaces John Deere OEM nos AR58572, AR46113, Replaces Casting nos R38546, R46732, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439259)$540.01
PTO Countershaft, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R33852, 540-1000 RPM Independent PTO, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497636)$25.01
PTO Drive Reduction Gear - This 540 Rpm PTO Drive Gear fits John Deere Models: 2840, (3020 serial number 123000 and up), 4000, (4020 serial number 201000 and up), 4030, 4040, 4050, (4055, 4255, 4440, 4450, 4455 all QUAD and POWER SHIFT), 4230, 4240, 4250, (4320 SYNCRO), 4430; Replaces John Deere Part Number R42014 (Item #: 121745, Ref: R42014)$254.00
PTO Drive Shaft, Used - For John Deere tractor models 4000, 4020, Replaces John Deere OEM nos AR32527, AR49414, 540 and 1000 RPM, Teeth: 19, Spline 29, Length:16 1/8", Syncro-Range Transmissions, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497641)$176.01
PTO Gear - Lower, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos R39792, Teeth: 30, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498994)$425.01
PTO Gear, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos R33488, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499009)$234.01
PTO Gear, Used - For John Deere tractor models 600, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, Replaces John Deere OEM number R42014, 31 Teeth, 540 and 1000 RPM, For a new version of this item use Item #: 121745, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499628)$150.01
PTO Gear, Used - For John Deere tractor models 600, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, Compatible with John Deere Construction and industrial models 500, 500B, 500C, Replaces John Deere OEM number R33339, Teeth: 16 and 23, 540 and 1000 RPM, For a new version of this item use Item #: 121744, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499630)$95.01
PTO Guide, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2040S, 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2400, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3120, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000, 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R45126, R38220, 16 Drive Splines, For a new version of this item use Item #: 121740, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421740)$40.01
PTO Idler Gear, Used - For John Deere tractor models 600, 4000 (s/n 201000-later), 4010, 4020, 4320, Replaces John Deere OEM nos R26792, Teeth: 32, Syncro Countershaft, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498499)$80.01
PTO Plate, Remanufactured, AR26688 - For John Deere tractor models 4000, 4010, 4020, 4320, Replaces John Deere OEM number AR26688, RE29609, Clutch Size: 11", Clutch Hub: 1-7/8", Clutch Spline: 29, Clutch Center: Solid, Clutch Type: Woven PTO, For a New version of this sku use Item #: 130090, (Item #: 204469)$100.50
PTO Quill, Used - For John Deere tractor models 2510, 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4230, 4320, 4430, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, Replaces John Deere OEM nos AR38168, Replaces Casting nos R38218, Casting Numbers need to match when selling, Some applications 498492 can be used as a substitution., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498506)$135.01
PTO Rear Drive Shaft, Used - For John Deere tractor models 2510, 2520, 2840, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, Replaces John Deere OEM number R38224, R80744, R94130, Length: 11.840", This is a 540 RPM Shaft to replace the 1000 RPM standard shaft, Splines: 6 and 21, For a new version of this item use Item #: 121487, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421487)$89.40
PTO Shaft - 1000 RPM, Used - For John Deere tractor models 600, 2510, 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, Replaces John Deere OEM number R38224, R94130, R80744, 10.875" Long, 21 Spline, 1000 rpm, Bearing Surface Diameter: 2", For a new version of this item use Item #: 108935, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408935)$55.01
PTO Shaft - 540 RPM, Used - For John Deere tractor models 2510 (s/n 010491-later), 2520, 2840, 3020, 4000, 4020, 4040, 4050, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number AR41752, Bushing [JD7557] Not Included, Center surface Diameter: 2", For a new version of this item use Item #: 108507, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408507)$58.01
PTO Shaft Guard / Cover, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4520, 4620, 4640, 4650 (s/n 11392-earlier), 4840, 4850 (s/n 9325-earlier), 5010, 5020, 7020, 8430, 8440, 8450 (s/n 5501-earlier), 8630, 8640, 8650 (s/n 8001-earlier 8850 s/n 3544-earlier), 8850 (s/n 3544-earlier), Replaces John Deere OEM nos AR26701, Front Shaft Shield, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499880)$50.01
PTO Shaft Idler, Used - For John Deere tractor models 4000, 4020, 4320, Replaces John Deere OEM nos R33346, R46747, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498484)$175.01
PTO Shaft, Used - For John Deere tractor models 600, 4000, 4020, Replaces John Deere OEM nos AR41750, AR32153, 540 and 1000 PTO Shaft For Syncro-Range Transmission, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499927)$321.01
PTO Shield, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4555, Replaces John Deere OEM number R33348, For a new version of this item use Item #: 104094, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404094)$25.01
PTO Shift Collar, Used - For John Deere tractor models 4000, 4010, 4020, 4320, Replaces John Deere OEM number R26666, For a new version of this item use Item #: 177035, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498481)$80.01
PTO Upper Idler Gear, Used - For John Deere tractor models 4000, 4020 (s/n 160427-later), Replaces John Deere OEM nos R42039, Power Shift, 29 Teeth, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498942)$163.01
Deluxe Seat Cushion Center Support, Used - For John Deere tractor models 820, 830, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7520, Replaces John Deere OEM nos R27785, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430367)$10.01
Seat Back - This is the SEAT BACK, UPPPER PORTION OF PHOTO. Yellow Vinyl on Steel For 1020, 1520, 2020, 2440 (To S#340999), 2630, 2640 (To S#340999), 4000 Low Profile. Replaces OEM # AR65449. (Item #: 180185, Ref: R0175)$369.00
Seat Back - This is only the SEAT BACK, Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 180180, Ref: R0189)$265.00
Seat Back - Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 178476, Ref: R0192)$280.00
Seat Bottom - This is the SEAT BOTTOM, LOWER PORTION OF PHOTO. Yellow Vinyl on Steel For 1020, 1520, 2020, 2440 (To S#340999), 2630, 2640 (To S#340999), 4000 Low Profile. Replaces OEM# AR65448. (Item #: 179584, Ref: R0174)$275.00
Seat Bottom - This is only the Seat Bottom in Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 109266, Ref: R0182)$171.44
Seat Bottom - This is only the Seat Bottom in Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 182163, Ref: R0188)$189.00
Seat Bottom - This is only the Seat Bottom in Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 180186, Ref: R0191)$189.00
Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket and (1) R31513 LH seat bracket. (Item #: 108180, Ref: SBK400)$26.00
Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. Used SBK400 Bracket Set, not included. The bottom cushion in this set is 3 1/2 inches thick. Replaces R34618, R34619, R34620, TY26545 (Item #: 109348, Ref: JD5678)$260.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1)$2.30
Seat Suspension Repair Kit - This 49 piece repair kit is for tractors with a deluxe seat. Kit Includes: Pins, E-Clips, Bushings, Spring, Plastic Rollers, Shims, Rubber Bushings, Wire Cable, Flat Links, Flat Spring, Washers, Nuts, Suspension Link. Replaces John Deere OEM numbers A4744R, AR26403, R26433, R26436, R26832, R26875, R26876, R26878, R27440, R27441, R31260, R36704, R51648, R78257. (Item #: 164395)$230.00
Seat Upper Back - This is only the Upper Back Piece in Yellow Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 109265, Ref: R0184)$65.00
Seat Upper Back - This is only the Upper Back in Brown Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 180189, Ref: R0190)$103.00
Seat Upper Back - This is only the Upper Back in Brown Fabric on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 180188, Ref: R0193)$103.00
Seat Upper Back - This is only the Upper Back in Black Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 180187, Ref: R0977)$94.00
Sheet Metal / Body Parts
4th Step - For John Deere tractor models 2840, 2950, 2955, 3010, 3020, 3040, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 109570)$96.00
4th Step Kit - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, With rubber side plate, Step is 15" x 6", For use with step kits 108121 or 108122, Comes primered (color may vary). Prior to painting check fitment, (Item #: 150801)$114.00
Battery Box - Left - This left side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Replaces AR20210, AR26617, AR34819, AR40208, AR40674. Battery box comes primed. (Item #: 104080, Ref: JTBL-1WB)$63.00
Battery Box, RH - For tractor models 2520, (3020 serial number 123000 and up), (4000 Row crop serial number 201000 and up), (4020 Row crop serial number 201000 and up), 4320, 4520, 4620. All less cab and JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: AR40673)$67.00
Battery Box - Right - This right side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Battery box comes primed. Replaces Replaces: AR10209, AR26618, AR34185, AR40207, AR40673. (Item #: 104079, Ref: JTBR-2WB)$67.00
No Picture
Battery Box, Right Hand Side - Right Hand with Stamped Steel Tray For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 Row Crop Models without Cab. OEM# AR34185, AR40207, AR40209, AR40673. Needs left hand side to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: R0161)$67.00
No Picture
Battery Hold Down - For tractor models: (3010, 4010 standard), (3020, 4020 Row-Crop with cab and standard), 4000, (4320, 4520, 4620 Row-Crop with cab). (Item #: 163483, Ref: AR26469)$65.00
Cab Foam Kit - With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab. (Item #: 112925, Ref: R1235)$421.00
No Picture
Control Panel Cover - Left Hand - For John Deere tractor models 600, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4320, 4520, 4620, 7020, 7520, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, 510, Replaces John Deere OEM number AR40585, Fits Left Hand Side, (Item #: 163904)$90.00
Control Panel Cover - Right Hand - For John Deere tractor models 600, 3020, 4000, 4020, 4320, 4520, 4620, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 500A, 500C, 510, Replaces John Deere OEM number AR40584, Fits Right Hand Side, (Item #: 163905)$90.00
Cover - Transmission / Rockshaft / Selective Control Valve - For John Deere tractor models 2520, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number R41446, (Item #: 167450)$118.00
Cowl, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4530, 4620, 5010, 5020, 6030, Replaces John Deere OEM nos AR41584, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498966)$125.01
Extend-A-Step - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, To be used with left hand step kit use Item #: 113386, (Item #: 110137)$92.00
Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103964, Ref: R70588)$107.72
Fender Bracket, Used - For John Deere tractor models 4000, 4020, 4320, 5020, Replaces John Deere OEM nos R48397, 15 3/4 in high from bottom to center of top hole, 1 5/8 in thick, 7 in center to center on bottom mounting holes, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499446)$89.01
Fender, Economy - Left Hand - For John Deere tractor models 4000 (s/n 2050001-later), 4020 (s/n 2050001-later), 4320, Replaces John Deere OEM number AR51445, Fits left hand side, Economy version, Includes: Hand Hold, single headlight hole, Uses flat bar bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For replacement fender hand grommet use Item #: 146659, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 146658)$247.00
Fender, Economy - Right Hand - For John Deere tractor models 4000 (s/n 2050001-later), 4020 (s/n 2050001-later), 4320, Replaces John Deere OEM number AR51444, Fits right hand side, Includes: Hand Hold, single headlight hole, Uses flat bar bracket supports, Economy version, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For replacement fender hand grommet use Item #: 146658, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 146659)$235.00
Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103958, Ref: RE13879)$235.00
Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab and sound guard body. Tractors: 530, 630 gp (SN# 6300000 and up), 730G&D GP (SN# 7300000 and up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103957, Ref: RE13878)$235.00
Fender - Flat Top, RH Side, With Hand Hole - For 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces OEM RE13878. Rubber Hand Hole Grommets available as part number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127011, Ref: AR48872)$365.00
Fender, Restoration Quality - Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, 2010, 2030, 2150, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Replaces John Deere OEM number RE13879, AR20870, AR48873, Fits left hand side, Flat Top Fender - Restoration Quality, Includes: Hand Hold, (2) headlight holes, Uses angle iron bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For right hand fender less hand hole use Item #: 127011, Additional Handling and Oversize Fees Apply To This Item, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 126635)$365.00
Fender, Restoration Quality - Left Hand - For John Deere tractor models 4000 (s/n 2050001-later), 4020 (s/n 2050001-later), 4320, Replaces John Deere OEM number AR51445, Fits left hand side, Flat Top Fender - Restoration Quality, Includes: Hand Hold, single headlight hole, Uses angle iron bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender, Economy - Left Hand use Item #: 127052, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 127051)$387.00
Fender, Restoration Quality - Right Hand - For John Deere tractor models 4000 (s/n 2050001-later), 4020 (s/n 2050001-later), 4320, Replaces John Deere OEM number AR51444, Restoration Quality, Fits right hand side, Includes: Hand Hold, single headlight hole, Uses angle iron bracket supports, For Replacment Fender Hand Grommet use Item #: 127051, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 127052)$344.00
Fender Set, Dual Light Holes - Right Hand and Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, 2010, 2030, 2150, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Replaces John Deere OEM number RE13879, RE13878, AR20870, AR48873, AR48872, Right Hand and Left Hand Set, Economy version, Includes: Hand Hold, (2) headlight holes, Uses flat bar bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For right hand side use Item #: 103958, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160455)$295.00
Fender U-Bolt - This Fender U-Bolt is used on John Deere (2010 Rowcrop Utility; SN: 42001 and up), 2010 Rowcrop, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. It Replaces original part number R26992 (Item #: 103965, Ref: R26992)$14.40
Fender U-Bolt - 5/8" x 8 1/2", Used - For John Deere tractor models 2010, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number R26992, Length: 8.5", For a new version of this item use Item #: 103965, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497452)$8.10
Frame Rail, LH Side - For tractor models 4000, 4010, 4020. Replaces R26556. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103859, Ref: R34114)$432.00
Frame Rail - LH, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM number R34114, Has 4 Holes for Front Engine Mounts, Fits Left Hand Side, For a new version of this item use Item #: 103859, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499870)$272.01
Frame Rail, RH Side - For tractor models 4000, 4010, 4020. Replaces R26555. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103858, Ref: R34113)$432.00
Frame Rail - RH, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM number R34113, Has 4 Mounting Holes for Front Motor Mount, Fits Right Hand Side, For a new version of this item use Item #: 103858, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403858)$258.01
Frame Suport, front, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, Replaces John Deere OEM nos R41110, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433688)$234.01
Front Frame Plate, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM nos AR32466, AR26384, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498599)$75.01
Front Grill Screen - For 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104086, Ref: AR26477)$105.00
Front Stack Weight - Aftermarket, Used - For John Deere tractor models 820, 920, 1020, 1120, 1520, 2010, 2020, 2030, 2120, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2750, 2755, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, Replaces John Deere OEM number R27643, Replaces John Deere Casting nos BW719, Aftermarket, For a new version of this item use Item #: 168974, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456144)$119.40
Front Stack Weight, Used - For John Deere tractor models 820, 920, 1020, 1120, 1520, 2010, 2020, 2030, 2120, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2750, 2755, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, Replaces John Deere OEM number R27643, Weight: 85, For a new version of this item use Item #: 168974, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499929)$155.01
No Picture
Grill - Side grill panel, 17 x 19-3/4. For tractors: 4000, 4010, 4020. Two (2) used per tractor. Replaces AR26539. For 1010, 2010, 3010, 3020, 4010, 4020, 5010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101934, Ref: TP-AR32720)$72.00
No Picture
Handrail - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Easy to install with no holes to drill and hardware is included, Durable green powder coat finish, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step kit use Item #: 114447, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114445)$77.00
Hood Handle - Left Hand, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM nos AR45370, Less Cab, With PTO, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497901)$60.01
Hood Handle - Right Hand, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4520, 4620, Replaces John Deere OEM nos AR45369, AR32829, Less Cab, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498540)$83.01
Hood - Oval Exhaust Hole - For John Deere tractor models 4000, 4020 (s/n 250000-later), Replaces John Deere OEM number AR50503, Oval Exhaust Hole, Without Air Stack Hole, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 109703)$1044.65
Hydraulic Shaft Cover - Right Hand, Used - For John Deere tractor models 3020 (s/n 123000 - later), 4000, 4020 (s/n 201000 - later), 4320, Replaces John Deere OEM number AR41599, Fits Right Hand Side, For a new version of this item use Item #: 108517, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408517)$100.01
Platform - Does NOT have dimmer switch hole. For tractor models 2520, (3020 row crop and high crop from SN# 123000 and above), (4000 row crop and high crop from SN# 201000 and above), (4010 row crop from SN# 001000 and above and Standard From SN# 020200 and above), (4020 row crop and high crop from SN# 201000 and above and syncro range from SN# 065000 to 090999), (4320 row crop). Replaces AR40672, AR48004. (Item #: 116933, Ref: AR48727)$260.00
No Picture
Rear Side Panel - LH, Used - For John Deere tractor models 4000, 4020 (serial no. 200300 - later), Replaces John Deere OEM number AR40774, Fits Left Hand Side, For a new version of this item use Item #: 101953, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401953)$50.01
Rear Side Shield, LH, Late - Left side. For tractor models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101953, Ref: AR40774)$63.00
Rear Side Shield, RH, Late - Right Side For tractor models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101952, Ref: AR40773)$63.00
Rockshaft Cover, LH - With tool box. For tractor models 2520, (3020 from serial number 123000 and up), 4000, (4020 from serial number 201000 and up), 4320. (Item #: 110688, Ref: AR40817)$170.00
Rockshaft Cover, RH - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 108517, Ref: AR41599)$150.00
Rockshaft Cover Set - For John Deere tractor models 2520, 3020 (s/n 201001-later), 4000, 4020 (s/n 201001-later), 4320, Replaces John Deere OEM number AR40817, AR41599, R41231, Includes Center Cover, Righ Hand Cover, Left Hand Cover less Tool Box, (Item #: 127316)$360.00
Rockshaft Cover Set with Toolbox - For John Deere tractor models 2520, 2530, 3020 (s/n 201001-later), 4000, 4020 (s/n 201001-later), 4320, Replaces John Deere OEM number AR40817, AR41599, R41231, Includes Center Cover, Righ Hand Cover, Left Hand Cover with Tool Box, Additional Handling and Oversize Fees Apply To This Item, (Item #: 127315)$362.00
Rockshaft Cover without Tool Box - Left Hand - For John Deere tractor models 2520, 3020 (s/n 201001-later), 4000, 4020 (s/n 201001-later), 4320, Replaces John Deere OEM number AR40817, Fits Left Hand Side, Tool Box Not Included, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For 3 piece set less tool box use Item #: 110688, (Item #: 108516)$173.00
Rockshaft Housing Bottom Cover, Used - For John Deere tractor models 2510, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R55079, R27210, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432026)$60.01
Rockshaft Support - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 108520, Ref: R41231)$61.00
No Picture
Side Moulding - With Decal - Right Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1525)$140.00
No Picture
Side Moulding - With Decal - Left Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1526)$140.00
Side Plate - Left Hand - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4400, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R31513, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126553)$32.15
Side Screen - Side grill panel, 17 x 19-3/4. For tractors: 4000, 4010, 4020. Two (2) used per tractor. Sold individually. Replaces AR26539. For 1010, 2010, 3010, 3020, 4010, 4020, 5010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101934, Ref: AR32720)$72.00
Side Shield, Front, LH - For tractor models 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101967, Ref: AR32690)$100.00
Side Shield, Front, RH - For tractor models 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101966, Ref: AR32689)$80.00
No Picture
Step - For John Deere tractor models 2950, 3030, 3040, 3130, 3140, 3150, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4760, 4840, 4850, 4955, 4960, Durable powder coat finish, matches original equipment color, Convenient and easy access when fueling or servicing your tractor, Easy to install with no holes to drill, Hardware is included, Step: 20" wide 7" deep, Additional Handling and Oversize Fees Apply To This Item, (Item #: 110548)$120.00
Step Adapter Bracket - Left Hand - For John Deere tractor models 1010, 1020, 2010, 2020, 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Fits left hand side, For use on equipment less cab, Easy to install with no holes to drill and hardware is included, For Step Unit - Left Hand use Item #: 113386, (Item #: 108978)$78.00
Step Adapter Bracket - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Fits right hand side, For use on equipment less cab., Easy to install with no holes to drill and hardware is included, Comes primered (color may vary). Prior to painting check fitment, For a Right Step Unit use Item #: 114447, (Item #: 114446)$77.00
No Picture
Step Kit - Left Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (row crop and utility tractors), Replaces John Deere OEM number RE62856, Open tread design for better slip resistance, Kit Includes: handrail, steps, side panels, and mounting bracket, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, To Create a 4th Step use Item #: 150801, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108122)$335.00
Step Unit - Early Hiniker Cab - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with early Hiniker cab or Stolper cab less Power Shift), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114450)$209.98
Step Unit - Late Hiniker Cab - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with Hiniker cab late cab only where original steps mount with 4 bolts directly under the door), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, (Item #: 114448)$387.00
Step Unit - Left Hand - For John Deere tractor models 2420 (Open station row crop and will require adapter bracket), 2510 (Open station row crop and will require adapter bracket), 2520 (Open station row crop and will require adapter bracket), 2950, 3010 (Open station row crop and will require adapter bracket), 3020 (Open station row crop and will require adapter bracket), 3030, 3040, 3130, 3140, 3150, 3155, 4000 (Open station row crop and will require adapter bracket), 4010 (Open station row crop and will require adapter bracket), 4020 (Open station row crop and will require adapter bracket), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4260, 4320 (Open station row crop and will require adapter bracket), 4350, 4430, 4440, 4450, 4455, 4520 (Open station row crop and will require adapter bracket), 4555, 4560, 4620 (Open station row crop and will require adapter bracket), 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all other with Sound Guard cab), Fits left hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Handrail shown is sold separately, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 113386)$190.00
No Picture
Step Unit - Right Hand - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all row crop with open station), Fits right hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114447)$238.00
Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103952, Ref: R27883)$39.00
Upper Frame Plate, Used - For John Deere tractor models 4000, 4010, 4020, Replaces John Deere OEM nos AR45460, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498598)$117.01
Axle Center Tube - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Replaces original part number AR50865 $100 will be added for shipping due to size/weight of part. (Item #: 108906, Ref: R0009)$1439.01
No Picture
Axle, Front Housing Clamp - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number AR30154, Replaces John Deere Casting number R27809, Front Axle Housing and Pivot Bracket Clamp, (Item #: 119444)$106.00
Axle, Front Housing Clamp, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number AR30154, Replaces John Deere Casting nos R27809, Front Axle Housing and Pivot Bracket Clamp, For a new version of this item use Item #: 119444, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 419444)$20.01
No Picture
Axle Shaft, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4230 (s/n 026188-earlier), 4320, 4430 (s/n 040770-earlier), 7520, Replaces John Deere OEM nos R53643, Axle Length: 37 1/16", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433718)$360.01
Axle Shaft, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4430, 4440, 4450, 7520, Replaces John Deere OEM nos R60076, Axle Length: 36 29/32", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498964)$360.01
No Picture
Differential Assembly, Used - For John Deere tractor models 600 (s/n 91000-later), 4000, 4020 (s/n 91000-later), 4040 (s/n 006406-earlier), 4230 (s/n 026667-later), Replaces John Deere OEM nos AR39651, R271076, Replaces Casting nos R34799, R42505, R34800, Quad Range and Syncro Range, With Differential Lock, 2 Pinion Differential, Non Anti-Friction Differential, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 465142)$985.01
Differential Assembly, Used - For John Deere tractor models 4000, 4010, 4020, 4320, 7520 (Front), Replaces John Deere OEM nos R31189, R42444, R42446, R31195, AR103363, R63477, R54182, Includes Differential Housing # R31189, AR103363, Include Pinion Gear No R42444, , Includes Beverl Gear # R63477, R42446 or R54182, Includes Cover # R31195, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497516)$349.01
Differential Gear, Used - For John Deere tractor models 4000, 4020 (s/n 091000-later), 4230, 4430, Replaces John Deere OEM nos R42448, R34854, R58180, R54183, Beveled Teeth: 24, Internal Splines: 18, Teeth: 47, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497748)$117.01
Differential Lock Valve, Used - For John Deere tractor models 600, 4000 (s/n 201000-later), 4020, 4520, Compatible with John Deere Construction and industrial models 570, 570A, 860, 860A, Replaces John Deere OEM nos AR40742, Replaces Casting nos R41044, R34841, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434072)$101.01
Differential Pinion Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040 (s/n 6406-earlier), 4230, 4240 (s/n 15151-earlier), 4320, 4430, 4440 (s/n 46789-earlier), 7520, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R26035, R42444, Teeth: 13, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498847)$40.01
No Picture
Front Axle Assembly, Wide, Heavy Duty, without hubs - For JD 3010, 3020, 4000, 4010, 4020. Schwartz Complete Axles and mounting Parts WITHOUT HUBS. These Heavy Duty Models do not include hubs and bearings. Use original hubs and bearings from narrow front axle. The Heavy Duty Models are especially adaptable for use with flotation tires. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 300 lbs. (Item #: 120004, Ref: 22770)$4179.01
Front Axle Housing Lock Bolt - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, (Item #: 108966)$23.90
Front Axle Housing Lock Bolt, Used - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester(s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, For a new version of this item use Item #: 108966, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408966)$13.61
Front Axle Housing with Bushings - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Front Axle Housing with Bushings. Used on AR44331 and AR44331H wide front ends. (Item #: 108906, Ref: AR50865)$1439.01
Front Axle Mounting Plate Wedge - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number R49098, (Item #: 109528)$39.00
Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839)$63.00
Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Item #: 123964, Ref: AR44333)$521.00
Knee Extension - Knee Extension. Used with Ar55180 spindle. Dimensions A-3.250 inch B-18.000 inch C-12.750 inch For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900 tractors (Item #: 109374, Ref: AR50962)$208.00
Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Item #: 110032, Ref: AR44333KN)$345.00
No Picture
Knee, Utiliy Row Crop Lo-Pro - For John Deere tractor models 3010, 3020, 4000, 4020, 4230, Replaces John Deere OEM number AR69834, (Item #: 165667)$185.00
No Picture
LH HD Roll O Matic Knuckle, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, Replaces John Deere OEM nos AR27315, Replaces John Deere Casting nos R30388, Casting No. R30388, Left Hand Heavy Duty, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499998)$410.01
Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Item #: 108910, Ref: AR50963)$320.00
Pinion Gear, Used - For John Deere tractor models 700, 2510, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7405, 7500, 7520, 8430, 8630, Replaces John Deere OEM nos A4379R, Teeth: 12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431225)$60.01
Pinion Shaft Gear, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R46435, Front, Teeth: 10 and 34, Quad and Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433692)$45.01
Pivot Bolster - Use R3064 Pin. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping due to weight. (Item #: 110737, Ref: R3063)$535.00
Pivot Pin - Used front and rear, 4.375" long, 1.500" dia. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Item #: 108967, Ref: R27817)$38.00
Pivot Plate - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Pivot plate with caps and bolts. (Item #: 110737, Ref: AR69836)$535.00
Planetary Pinion Carrier, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 7520, Replaces John Deere OEM nos R42901, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498766)$75.01
Planetary Pinion Carrier, Used - For John Deere tractor models 4000, 4020, 4050, 4055, 4230, 4250, 4255, 4320, 4430, Compatible with John Deere Combine(s) 9600, 9610 (with planetary final drives), Replaces John Deere OEM nos R59933, Without Gears, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497170)$176.01
No Picture
Plate, Wheel Manifold - For John Deere tractor models 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Compatible with John Deere Combine (s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5820, Compatible with John Deere Construction and industrial models 670A (Automatic Blade Control System, Graders), 670B (Motor Graders), 670C (s/n 582129-earlier, Motor Graders), 670CH (s/n 582129-earlier, Motor Graders), 672A (Automatic Blade Control System, Graders), 672B (Motor Graders), 672CH (s/n 582129-earlier, Motor Graders), 770A (Automatic Blade Control System, Graders), 770B (Motor Graders), 770BH (Motor Graders), 770C (s/n 582129-earlier, Motor Graders), 770CH (s/n 582129-earlier, Motor Graders), 772A (Automatic Blade Control System, Graders), 772B (Motor Graders), 772BH (Motor Graders), 772CH (s/n 582129-earlier, Motor Graders), Replaces John Deere OEM number R42818, Power front wheel drive oil manifold and motor cylinder plate, (Item #: 171840)$234.00
No Picture
Power Steering Bearing Plate - For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number R44406, (Item #: 165074)$147.00
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Item #: 113859, Ref: R34348)$68.00
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152)$69.98
Pump Shaft - Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Item #: 113862, Ref: R79154)$73.98
Pump Shaft - Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Item #: 113861, Ref: R79156)$61.98
Rear Axle Shaft, Used - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, Replaces John Deere OEM nos R60077, R33015, R53641, Length: 860MM (33 7/8"), Diameter 86MM (3 3/8"), Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497267)$475.01
Rear Cast Wheel Pinion Gear, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2010, 2020, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2141, 2240, 2350, 2440, 2510, 2520, 2541, 2550, 2630, 2640, 2750, 2755, 2840, 2940, 2941, 2950, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3141, 3150, 3641, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7020, 7200, 7400, 7520, Replaces John Deere OEM nos B3014R, Teeth: 2 (inside) 14 (outside), Inside Diameter: .85", Outside Diameter: 2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434488)$82.01
RH HD Roll O Matic Knuckle, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, Replaces John Deere OEM nos AR27314, Replaces John Deere Casting nos R30387, Casting No. R30387, Right Hand Heavy Duty, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499999)$410.01
Saddle Assembly - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM number 7448, For tractors with Schwartz wide front end conversions., (Item #: 152012)$717.00
No Picture
Spindle - Spindle, Right Hand or LH, for row crop tractors with adjustible front axles. This later production style spindle has a 5/8 diameter hole for steering arm bolt. Early production spindles with 3/4 diameter hole are no longer available. Check bolt/hole size befor For tractor models 2510, (2520 SN# 022001 and up), 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 102218, Ref: TP-AR55180)$165.92
No Picture
Spindle - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020 (All with Schwartz Front Axle), Replaces John Deere OEM number 3997, Vertical Length 13-3/8, Shaft Diameter 1-5/8, Spindle Diameter 1-5/8, Seal diameter 2.375", 6 Spline Spindle, Inner Bearing diameter 1.688", Outer Bearing diameter 1.3115", Requires 1 inch fine threaded nut, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108820)$282.00
Spindle - Spindle, LH/RH. Dimension A-10.750 inch B-1.50 C-1.687 D-1.312 For 4000, 4230, ALL Low Profile. 3010, 3020, All Row Crop Utilities. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102222, Ref: AR50983)$270.00
Spindle - Spindle, LH/RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001 and up. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 104778, Ref: AR50981)$164.98
Spindle Bolt Kit - For John Deere tractor models 2510, 2520 (s/n 022001-later), 3010, 3020, 4000, 4010, 4020, 4320 (All with Row Crop Front Axle), 5/8" x 2-3/4" steering arm spindle bolt, Contains Bolt, Washer and Lock Washer, Not for spindles with 3/4" x 1-3/4" bolt, (Item #: 154496)$5.50
Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 108046, Ref: A877R)$12.90
Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 110031, Ref: AR44333SP)$282.28
Spindle, RH/LH - Measures A= 15.125", B= 1.500", C= 1.687", D= 1.312". For tractor models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102218, Ref: AR55180)$165.92
Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Item #: 108047, Ref: A890R)$6.50
Splindle, RH/LH - Spindle, LH/RH. Dimensions A-12.750 inch B-1.50 inch C-1.687 inch D-1.312 inch. Fits 3010, 3020, 4000, 4010, 4020 All with Standard non-adj. front axle. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102221, Ref: AR55179)$168.00
Steering Arm - For John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number 2381, (Item #: 111425)$120.00
Steering Arm - Left Hand, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R47766, Left Hand, Diameter: 1.5", Splines: 6, For a new version of this item use Item #: 102705, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402705)$27.01
Steering Arm - Right Hand, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R47765, R27806, Right Hand, Diameter: 1.50", Splines: 6, For a new version of this item use Item #: 102704, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402704)$27.01
No Picture
Steering Bracket - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number WF29161, Steering bracket with 5" drop, Speeco steering bracket, (Item #: 176613)$240.00
Steering Gear Arm, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 3030, 4000, 4010, 4020, 4320, Replaces John Deere OEM number R27808, For a new version of this item use Item #: 102703, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402703)$51.01
Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875)$66.00
Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227)$57.00
Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101457, Ref: R26673)$56.00
Steering Wheel Cap, Used - For John Deere tractor models 820, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2250, 2440, 2510, 2520, 2630, 2640, 3010, 3020 (s/n 123000-later), 4000, 4010, 4020 (s/n 210000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 5103, 5105, 5203, 5205, 5220, 5225, 5303, 5320, 5325, 5400, 5420, 5425, 5500, 5520, 5525, 6300, 6403, 6603, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7815, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9560, 9620, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9600, 9610, 9640, 9650, 9660, 9680, 9750, 9760, 9860, 9880, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6910, 6950, 7460, 9935, 9970, 9976, 9986, 9996, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 4700, 4710, 4720, 4920, 6700, Replaces John Deere OEM number AL155227, AL118173, R47998, For a new version of this item use Item #: 101453, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401453)$33.00
Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101456, Ref: JDS338)$67.00
Thrust Washer, Used - For John Deere tractor models 600, 4000, 4010, 4020 (s/n 200999-earlier), 4040, 4040S, 4050, 4055, 4230, 4240S, 4250, 4255, 4350, 4430, 4450, 4455, Replaces John Deere OEM nos R26068, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444805)$13.76
Tie Rod - Tie rod end, outer threaded, Left hand threads, 3-7/8 to center of post. For fixed front axles on tractors 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320. For 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104880, Ref: TP-AR27430)$20.00
Tie Rod Assembly - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 Inch LENGTH ON INNER TIE ROD TUBE. Contains AR51584, AR27351, R28021, R28022, R28023, R28024 plus hardware. (Item #: 102252, Ref: AR44332)$76.00
Tie Rod Assembly - For tractor models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 Inch LENGTH ON INNER TIE ROD TUBE. (Item #: 104871, Ref: AR44334)$124.00
Tie Rod Boot - For John Deere tractor models 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4240, 4250, 4320, 4430, 4440, 4455, Replaces John Deere OEM number R28019, R40589, Replaces Allis Chalmers OEM number 70223558, 223558, Base: 1.800", Height: 0.765", Hole I.D: 0.740", (Item #: 165042)$5.00
Tie Rod End - Tie rod end, outer, 7/8-18 threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Item #: 104865, Ref: TP-AR27351)$14.30
Tie Rod End - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Item #: 104866, Ref: TP-AR51584)$24.50
No Picture
Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Item #: 104870, Ref: R3830)$58.98
Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R3042)$34.00
Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R28021)$34.00
Tie Rod Tube - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R28022, 11.500" Long, Small inner tube, (Item #: 104869)$22.90
Tie Rod Tube - Left Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle), Replaces John Deere OEM number R28115, Fits Left Hand Side, 19.375" Long, (Item #: 104879)$63.00
Tie Rod Tube - Right Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle), Replaces John Deere OEM number R28114, 16.500" Long, Right Hand Tie Rod Tube, (Item #: 104878)$95.00
No Picture
Tie Rod Tube, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R28022, 11.500" Long, Small inner tube, For a new version of this item use Item #: 104869, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435356)$12.00
No Picture
Tie Rod Wedge Block, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4555, 4560, 4630, 4755, 4760, 4955, 4960, 6030, 7600, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8560, 8760, 8960, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6620, 7700, 7720, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5420, 5440, 5460, 5720, 5730, 5820, 5830, 7440, 7445, 7800, 9900, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM number R28024, For a new version of this item use Item #: 104867, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435355)$1.01
Wheels
10" x 15" Front Rim, Used - For John Deere tractor models 1020, 1520, 2030, 2240, 2440, 2630, 2640, 2750, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, Rim Width: 10", Rim Diameter: 15", Holes: 6, Back Side: 5.500", 10X15, For a new version of this item use Item #: 103761, Additional Handling Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403761)$164.01
10" x 15" Front Rim - Yellow - For John Deere tractor models 1020, 1520, 2030, 2440, 2630, 2640, 2750, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, Width: 10", Diameter: 15", Holes: 6, Back Side: 5.500", (Item #: 103761)$266.00
20" X 30" Drop Center Rim, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 6405, 6415, 6605, 7020, 7505, 7515, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R34659, 20X30, For 23.1X30 Tires, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497233)$263.01
No Picture
8" x 16" 6 Bolt, Front Rim - For John Deere tractor models 2750, 2840, 2940, 2950, 4000, 4020, 4040, 4230, 4320, 4430, Width: 8", Diameter: 16", Back Side: 4.63", Holes: 6 (6" center to center), Center hole is 4-5/8", 8x16, (Item #: 103762)$140.00
8" x 16" 6 Bolt, Front Rim - For John Deere tractor models 2750, 2840, 2940, 2950, 4000, 4020, 4040, 4230, 4320, 4430, Replaces John Deere OEM number AL55753, AL82489, Width: 8", Diameter: 16", Back Side: 3.875", Holes: 6, Additional Handling and Oversize Fees Apply To This Item, (Item #: 122656)$132.00
Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $25 shipping due to weight. (Item #: 103764, Ref: FW60156)$109.00
Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235)$5.01
No Picture
Hub Cap, Used - For John Deere tractor models 2030, 2150, 2155, 2255, 2355, 2355N, 2440, 2510, 2555, 2630, 2755, 2840, 2855N, 2955 (s/n 765516-earlier), 3055, 3255, 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 5403, 5605, 5705, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7510, 7520, 7600, 7700, 7710 (s/n 090000-later), 7800, 7810 (s/n 090000-later), Compatible with John Deere Harvester(s) 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 210LE, 300B, 300D, 310D, 315D, Compatible with John Deere Tillage(s) 512, 637, 650, 685, 985, 2100, 2200, 2210, 2400, 2410, 2700, 3710, Compatible with John Deere Drill(s) 455, 730, 737, 750, 770, 780, 1990, 9000, 9400, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos R50992, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442136)$9.01
Rear Cast Wheel Pinion Gear Shaft, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1030, 1120, 1130, 1520, 1530, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2840, 2850, 2950, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7405, 7520, 8430, 8440, 8450, 8640, 8650, Replaces John Deere OEM nos A4380R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430283)$21.01
No Picture
Retainer Adjusting Screw, Used - For John Deere tractor models 4000, 4200, 4400, 4410, 4500, 5200, 7200, Replaces Ford OEM nos C3NN1085A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442232)$22.51
Rim Clamp, Used - For John Deere tractor models A (s/n 477000-later), AO (s/n 014800-later), AR (s/n 014800-later), B, BN, BNH, BW, BWH, G, GH, GN, GW, R, 60, 70 (s/n 014800-later), 80, 600, 620, 630, 720, 730, 820, 830, 2010, 3010, 3020, 3030, 3120, 3130, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 55 (s/n 12051-39349), 105, 6602, 6622, Replaces John Deere OEM nos B634R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497223)$6.01
Rim Clamp, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1120, 1520, 1630, 1640 (s/n 429999-earlier), 1830, 1840 (s/n 429999-earlier), 2010, 2020, 2030, 2040 (s/n 429999-earlier), 2120, 2130, 2140 (s/n 429999-earlier), 2440, 2510, 2520, 2630, 2640, 3010 (049999-earlier), 3020, 3030, 3040 (s/n 429999-earlier), 3120, 3130, 3140 (s/n 429999-earlier), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Construction and industrial models 480, Replaces John Deere OEM nos A4388R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498960)$6.01
Spindle Dust Shield - For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2693R, 4020KR, Used with AR50962 and AR50963 knees, (Item #: 110385)$12.80
Square Rim Clamp Bolt, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1630, 1830, 2020, 2030, 2130, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 3030, 3120, 3130, 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number 08H4694, 36" OR 42" RIM, 5/8" X 4", SAE 8, For the nut use Item #: 464266, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444632)$4.76
Square Rim Clamp Bolt, Used - For John Deere tractor models A, AO, AR, 50, 60, 70, 620, 630, 720, 730, 1010, 1830, 2010 (s/n 42001-later), 2030, 2130, 2510, 2520, 3010, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Combine(s) 55, 95, 105, 6602, 6622, Replaces John Deere OEM nos A4064R, R34801, 5/8" X 3 - 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444631)$3.76
Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577 (Cone), 25521 (Cup), M88048 (Cone), M88010 (Cup), 23342 (Seal), R26632 (Seal Retainer). (Item #: 102229, Ref: WBKJD6)$40.00
Wheel Bolt - This wheel bolt fits the following John Deere tractor models using the R49839 and R47076 hubs: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, and 4240. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: AA4173R and AT11920. (Item #: 108605, Ref: WB916)$1.90
Wheel Front 8X16 - Front Rim with weight holes. 8 inch x 16 inch. 6 bolt, 6 inch circle, 4.62 inch pilot. For the follwing models: 1520, 1640, 1840, 2040, 2040S, 2140, 2750, 2840, 2940, 2950, 3010, 3030, 3040, 3130, 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6403, 7405, 7500. Replaces A-JD3210. (Item #: 180445, Ref: D5NN1007A)$109.00
Wheel Half Sleeve, Keyed - 86 MM - For John Deere tractor models 4000 (Row Crop and Standard), 4020 (Row Crop and Standard), 4040, 4050 (s/n 2875-later), 4230, 4240, 4250 (s/n 3914-later), 4320, 4430, 4440, 4455 (Mexico), 7020, 7405 (With 18.4x38 Tires), 7520, Replaces John Deere OEM number R33532, Keyed Half, 86 MM, For use with Cast Rear Wheels R33450, R34680, R48954, R48955, R52160, R70309, (Item #: 109650)$124.87
Wheel Half Sleeve, Keyed - 86 MM, Used - For John Deere tractor models 4000 (Row Crop and Standard), 4020 (Row Crop and Standard), 4040, 4050 (Eff. S/N 2875), 4230, 4240, 4250 (From S/N 3914), 4320, 4430, 4440, 4455 (Mexico), 7020, 7405 (With 18.4x38 Tires), Replaces John Deere OEM number R33532, Keyed Half, 86 MM, Row Crop and Standard, For a new version of this item use Item #: 499629, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409650)$75.01
Wheel Half Sleeve, Keyed Half - 79.375 MM, Used - For John Deere tractor models 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 4000, 4010, 4020, 4030, Replaces John Deere OEM number R33540, Use with Rear Cast Wheels R33430, R48954, R48955, Keyed Half, 79.375 MM, Pinion Half Sleeve use Item #: 499524, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499523)$189.01
Wheel Half Sleeve, Keyed Half, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 7020, 7520, Replaces John Deere OEM number R33534, Keyed Half, Pinion Half Sleeve use Item #: 499424, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499425)$129.01
Wheel Half Sleeve, Pinion - 79.375 MM, Used - For John Deere tractor models 2355, 2555, 2650, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4030, 4230, 6110, 6120, 6200, 6215, 6300, 6320, 6400, 6415, 6420, 6500, 6605, 6615, 6715, Replaces John Deere OEM number R33539, Use with Rear Cast Wheels R33430, R48954, R48955, 79.375 MM, Keyed Half Sleeve use Item #: 499523, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499524)$35.01
Wheel Half Sleeve, Pinion Half - 86 MM, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4050, 4230, 4250, 4430, 4450, 4455, 7020, 7405, 7500, 7520, Replaces John Deere OEM number R33531, R93955, 86 mm, Pinion Half, New Keyed Half Sleeve use Item #: 409650, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499629)$55.01
Wheel Half Sleeve, Pinion Half, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 7020, 7520, Replaces John Deere OEM number R33533, Pinion Half, Keyed Half Sleeve use Item #: 499425, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499424)$89.01
Wheel Half Sleeve, Used - For John Deere tractor models 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM number R32224, A4386R, Use with Rear Cast Wheels F1478R, F1500R, F1590R, F1591R, R21480, R31610, or R31620, Other Half Sleeve use Item #: 499550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499525)$60.01
Wheel Half Sleeve, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 2355, 2510, 2520, 2555, 2755, 2840, 2855, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 4000, 4010, 4020, 4030, 4230, Replaces John Deere OEM number A4384R, Pinion Half, Hi-Crop and 4000 Series, Other Wheel Half use Item #: 499525, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499550)$25.01
Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 or WBKJD7 (depending on spindle), WB916 Bolts and hub cab A1555R. (Item #: 102237, Ref: R48763)$54.00
Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref: A1555R)$10.80
Wheel Hub, Used - For John Deere tractor models 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 3150 (Standard Duty), 3320, 3350 (Standard Duty), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030 (after s/n 186270), 4040 (after s/n 186270), 4230 (after s/n 186270), 4240 (after s/n 186270), 4430 (after s/n 186270), 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6403 (after s/n 186270), 6410, 6420, 6500, 6510, 6520, 7405 (after s/n 186270), Replaces John Deere OEM number T21545, 6 bolt hub, Uses 3 bolt cap, For a new version of this item use Item #: 102234, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402234)$36.51
Wheel Hub, Used - For John Deere tractor models 1520, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R26631, R48763, 6 bolt hub, Regular Duty Hub, Marked R26631, For a new version of this item use Item #: 102237, (Item #: 499480)$23.76
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697)$7.70
2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696)$7.70
No Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186)$22.80
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187)$14.80
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185)$41.00
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y)$24.40
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$88.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.40
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$55.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501)$57.00
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.30
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.60
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.50
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.20
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$16.10
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$16.10
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$120.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$51.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236)$382.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195)$122.00
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP)$8.70
No Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL)$76.00
No Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT)$29.50
No Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP)$10.30
No Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL)$110.00
No Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT)$42.00
No Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP)$10.50
No Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL)$60.00
No Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT)$23.30
No Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP)$8.00
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$60.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$17.00
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602)$52.00
Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014)$46.00
Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016)$53.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759)$9.00
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166)$97.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166)$69.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$109.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.90
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$116.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$67.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
John Deere Model 4000 Manuals
4000 - Gas and Dsl I&T Aftermarket Shop Repair Manual 224 Pages (Part No: JD-203)
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
