FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 401B Tractor Parts

[Categories] [All John Deere Models] [Print]

Clutch

Carrier, Clutch Throw Out Bearing - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 380, 400, 401, 401B, 401C, 410, 480, 480B. (Item #: 163426, Ref: AT20055) $102.00

Clutch Disc - 11 inch diameter, 1 inch hub, 15 spline. For tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640. Industrials: 300, 300B, 301, 302, 401, 401B, 401D. (Item #: 184538, Ref: RE29980) $130.00

Clutch Disc 10 Inch - This is 10 inch organic, spring loaded disc with a 20 spline, 1-5/16 inch hub. It is used on Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT21669, AT21665, RE33891, AL24059 (Item #: 166097, Ref: AL71088) $110.00

Clutch Fork - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2840, 300, 300B, 301, 301A, 302, 302A, 3030, 3120, 3130, 400, 401, 401B, 401C, 655, 655B, 750, 750B, 755, 755A, 755B, 820, 830, 850, 850B, 855, 920, 930, 940. (Item #: 173105, Ref: T21999) $139.52

Clutch Kit, 10 Inch - Our clutch kit for tractors with reverser transmission includes: A new 10 inch, 3 spring, pressure plate assembly; a new, 10 inch, 20 spline, 1 5/16 inch hub, organic woven, heavy duty clutch disc; new release and pilot bearings. Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410). (Item #: 184281, Ref: TP-R60368K) $250.00

Clutch Kit, 11 Inch Double - The 11 Inch double clutch is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1550, 1630, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640, John Deere Construction and Industrials 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, 401D. Includes AL120022 pressure plate (Flywheel Step - 2.200 Inch to 2.210 Inch) with PTO Disc (1.5 Inch 23 spline hub), 11 Inch rigid transmission disc (1 inch, 15 spline hub), Release Bearing, Pilot Bearing and Alignment Tool. Replaces 228002310, 328006110, 628-1411-10, 628141110, AL120017, AL120022, AL67525 (Item #: 135038, Ref: R27706N-RKIT) $800.00

Clutch Pedal Extension Spring - This spring has a 10.34 inch free length and is 0.94 inches OD. Replaces John Deere part number T21452. It is used on John Deere 820 (3 Cyl), 830 (3 Cyl), 920, 930, 1020, 1030, 1120, 1130, 1520 (Less Reverser), 1530, 1630, 1640, 1830, 2030, 2030 (Less Reverser), 2040 (Less Reverser), 2255, 2350, 2355, 2550, 2555, 2630 (Less Reverser), 2640 (Less Reverser), 2755, 2855, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C (Item #: 124546) $11.80

Clutch Release Carrier Spring - This Spring is used on ohn Deere Tractor models: 1020 (Less Reverser), 1520 (Less Reverser), 1530 (Less Reverser), 2020 (Less Reverser), 2030 (Less Reverser), 2440 (Less Reverser), 2630 (Less Reverser), 2640 (Less Reverser). Also used on John Deere Construction and Industrials: 300, 300B, 301, 301A, 302A, 400, 401, 401B, 401C, 401D. Replaces John Deere part number T21450 (Item #: 161810, Ref: T21450) $4.70

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Item #: 108447, Ref: AL10107) $1.80

Pilot Bearing - This Pilot Bearing fits the following tractor models: 1050, 950, 5200, 5210, 5300, 5400, 5410, 5425, 5500, 5520, 300B, 301A, 302, 302A, 401B, 401C, 401D, 500, 500A, 500B, 500C, 3038, and 3155. It measures 1.4375 inches inside diameter, 2.676 inches outside diameter, and .587 inches thick. Replaces part numbers: JD8504 and JD9449. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate, 11 - For tractor models 300, 300B, 301, 301A, 302, 302S, 400, 401, 401B, 401C, 401D, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1750V, 1850, 1850V, 1950, 1950N, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2450F, 2630, 2640. Replaces AL18714, AL39624, AL55140, AL18714-R, 1L30151, AL40882, AL55140-R, AT25482, R18714, R25109, R25109-1, R27706, R55140, T25109-R, T27706-R, VPG1079, 228002323, 228002310, SW01215, TP-T27706. (Item #: 150754, Ref: AL120022) $318.00

Pressure Plate Assembly, 10 Inch - Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT22064, AT60368, R22064 (Item #: 158074, Ref: AT22064) $206.00

Cooling System

Cooling Fan - 6 or 7 Blade, Used - For John Deere Construction and industrial models 210C, 310A, 401B, 401C, 401D, 410, 480C, 482C, 500C, 510, 570, 570A, Replaces John Deere OEM nos AT170040, AT35158, Blades: 6 or 7 Blades, 18" diameter, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497823) $89.01

Radiator - For 300B, 301A, 302A, 401, 401B, 401C, 480A, 480B, 1520 all without Hi-Lo Shift or Reverser. Radiator WITHOUT OIL COOLER. Core is 20.062" High, 18.5" Wide. Also replaces AT28583. (Item #: 101739, Ref: AT48171) $523.00

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $8.50

Thermostat Housing Cover - For tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, (2040, 2240 SN# 349999 and below), 2120, (2440 SN# 305414 and below), 2630, 2640, 300, (300B, 301A, 302, 302A SN# 345266 and below), 301, 400, 401, (401B SN# 468294 and below), (401C SN# 305414 and below), 820, 830, 920, 930. (Item #: 159569, Ref: T23620) $28.50

Thermostat Housing Cover - Used on gas engines. For tractor models 1020, 1520, 1830, 2020, 2030, 210C, 2130, 2440, 2510, 2520, 300, 300B, 301, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410. (Item #: 159570, Ref: T20317) $16.20

Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Item #: 107989, Ref: RE25043) $142.00

Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628) $90.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. (Item #: 164008, Ref: AR101549) $9.70

Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Item #: 173137, Ref: R29521) $205.00

Drive Train

Bevel Gear, Differential - 18 teeth. For tractor models JD300, JD301, JD310, JD380, JD400, JD401, JD480, 1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030, 1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C, 401D, 410B, 410C. (Item #: 172322, Ref: T29394) $40.98

Differential Housing - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1641F, (1640, 1840, 2040 SN# up to 410063), 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, (300B SN# 195279 and up), (302A SN# 194773 and up), 401B, 401C, 410, 820, 830, 920, 930, 940, JD310, JD380, JD400, JD401, JD480, JD480B. (Item #: 151867, Ref: T30253) $259.22

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Item #: 129237, Ref: 70202875) $15.60

Oil Pump, Transmission - Transmission Oil Pump Casting # R39244 or R57959, used only with dual speed PTOs. For tractor models 1020, 1030, 1120, 1130, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2135, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 300B, 301A, 302, 302A, 401B, 401C, 401D, 820, 830, 840, JD300, JD301, JD380, JD400, JD401, JD480, JD480A, JD480B. Replaces AR39107. (Item #: 150776, Ref: AR96662) $367.00

Pinion Gear, Planetary - 18 teeth, 1.759" wide. For tractor models 1020, 1120, 1130, 1140, (1350 SN# 627639 and up), 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C, 401D, 410, 480C, 482C, 820, 920, JD300, JD301, JD310, JD380, JD400, JD401, JD480. (Item #: 126896, Ref: T21547) $121.00

Shift Lever - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Item #: 172674, Ref: AT20093) $61.00

Shift Lever - Used on John Deere models: 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1130, 1520, 1530, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035EF, 2120, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 820, 830, 920, 930, 930VU. This part replace John Deere part numbers R53817, T22809 (Item #: 152054, Ref: R53817) $30.10

Electrical System

Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Item #: 117621, Ref: SE501356) $164.00

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 3300, 400, 401, 401B, 401C, 410, 450, 480, 480A, 480B, 24A, 440, 440A, 440B, 1010, 2010, 2020, 2030, 2510, 2520 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564. (Item #: 105566, Ref: AT14692) $14.40

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $188.00

Starter - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $160.00

Voltage Regulator - This voltage regulator is used on some of the following 1020, 1520, 1530, 2020, 2030, 2440, 2630, 2640, 300B Indust/Const, 301A Indust/Const, 302 Indust/Const, 302A Indust/Const, 401B Indust/Const, 401C Indust/Const, 4020, 4455, 450 Riding Mower, 4520. Replaces AMO6064, PL105-139, 1400-0569, 230-16102, 8010-139, VR-1755, 3195003, 3211952, 166-139, 5-139, 5-81, 5-67, R2AM4, 8RH2004D, 8RB2007, 105-139, VSH-6201R, 8-359, M5-146, M09-05, AR77485, AT21815. 12 Volt, B-Circuit, Neg ground. 15.2v set. Plug-Type N; Wiring Code 3 Terminal ID: Red Isolation Diode (+), Black Ground, Green Field, Yellow Ignition. (Item #: 125218, Ref: AR77485) $30.50

Engine Bearings

Main Bearing - .010 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27353, AT21110 (Item #: 123853) $11.20

Main Bearing - .020 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27360, AT21112 (Item #: 123854) $8.20

Main Bearing - .030 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27368, AT21114 (Item #: 123857) $4.98

Main Bearings - .010 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .010 oversize bearing set replaces John Deere part numbers AT21110, AT21132 (Item #: 106804) $73.00

Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106805) $55.00

Main Bearings - .030 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this ia .030 oversize bearing set replaces John Deere part numbers AT21136, RE27368 (Item #: 106806) $58.00

Main Bearings - Standard - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this bearing set replaces John Deere part numbers AT21139, AT21140 (Item #: 106803) $78.00

Main Bearing - Standard - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers T23214, R515304, RE27352, AT21140 (Item #: 123852) $9.70

Thrust Bearing - 010 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers (Item #: 123859, Ref: AT21132) $29.40

Thrust Bearing - .020 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE527235, AT21134 (Item #: 123860) $16.98

Thrust Bearing - 030 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21136, RE527236 (Item #: 123861) $11.00

Thrust Bearing - Standard - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21139, T23215 (Item #: 123858) $41.00

Engine Gaskets

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Item #: 176661, Ref: R97351) $11.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1020, 3300, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D, 350, 350B, 350C, 350D, 350D, 355D, 355D, 400G, 450, 450B. Replaces: AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.00

Engine Rebuild Kits

No
Picture
Engine Major Overhaul Kit - For 499, 2030, 2270, 2280, 2320, 2440, 2530, 3300, 310B, 401B, 401C, 401D, 410, 410B, 450C, 450C, 450D, 480B, 480C, 440B, 540B, 455D all with SN# 275484> 4.219 Diesel, 300 Series 4 cylinder, 4.02" bore. Engine Major Overhaul Kit includes: piston liner kit, connecting rod bushings/bolts set, gasket overhaul set with crank seals. (Item #: 130676, Ref: AT86984) $615.00

Engine Parts

No
Picture
Balancer Shaft - Left - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Item #: 114550, Ref: AR61352) $108.00

Balancer Shaft, LH - Balancer Shaft, LH This shaft is not the style that has the weight bolted on. MARKED AS R54054 . For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114550, Ref: RE26283) $108.00

Balancer Shaft, RH - Balancer Shaft, RH This shaft is not the style that has the weight bolted on. MARKED AS R54054. For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114551, Ref: RE26282) $112.00

Balancer Shaft - Right - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Item #: 114551, Ref: AR61351) $112.00

Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Item #: 152042, Ref: R82820) $176.00

Exhaust System

No
Picture
Manifold Gasket Set - For gas tractor models (180, 202 power units from SN# 51230), 400 Ind., 401, 401B, 401C, 480 Forklift, 480A Forklift, 480B, 2020, 2510, 2520 all with 4 cylinder gas engines. (Item #: 107950, Ref: R4778G) $31.10

Manifold Gasket Set - This Gasket Set is used with T20249 Manifold. It replaces part numbers R90658, T20006 (Item #: 101603, Ref: R0911G) $12.70

Manifold, Vertical Exhaust - This Diesel Manifold is used on 1830 (AG), 2011, 2020, 2030, 2035 (SPAIN), 2120, 2130, 2135, 2440, 2510, 2520, 2630, 2640, 401A, 401B, 401C, 480A, Forklift: 480B, Industrial: 310, 400, 401, 410, 480; models 4 cylinder 202, 219 or 276 cubic inch diesel engines with vertical exhaust. Does Not come with gasket. Gasket set available Part Number R0911G. (Item #: 101602, Ref: T20249) $103.00

Muffler - Horizontal muffler with Heat Shield. Muffler measures 31 inches, 35 1/2 overall, has an inlet of 2 inches and an outlet of 1 3/4 inches. Body diameter is 4 5/8 inches. For models 300, 301, 301A, 302, 400, 401, 401B, 1020, 1120, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2140, 2240. (Item #: 163094, Ref: AT21795) $264.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262) $6.30

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $300.00

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Sending Unit - Fuel Sending Unit. 30 ohms reads full. For tractor models 1020, 1520, 1530, 2020, 2030, (2440, 2640 SN# up to 340999), 2630, 300B, 301A, 302, 302A, 310A, 310B, 401B, 401C, JD300, JD301, JD310, JD380, JD400, JD401, JD410, JD480, JD480A, JD480B. (Item #: 119724, Ref: AT20912) $70.00

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Item #: 172673, Ref: AT20911) $8.80

Gauges

Tachometer - Tachometer. Fits John Deere - 1020, 1520, 1530, 2020, 2030, [ 2040, 2240 (Up to SN: 349999) ], 2440 (Up to SN: 340999), 2630, 2640 (up to SN: 340999), Industrial: 300 (Up to SN; 131260), 300B, 301, 301A, 302, 302A, 400 (Up to SN: 131260), 401, 401A, 401B, 401C; Replaces: AR50954, AR65445, AT159296, AT20641, T22409 (Item #: 115571, Ref: AR50954) $154.00

Hitch / Drawbar

Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203) $64.00

Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016) $7.50

Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849) $7.30

Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Item #: 118291, Ref: T21559) $13.50

Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Item #: 170398, Ref: T22399) $9.30

Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Item #: 176718, Ref: T21558) $27.85

$John Deere 401B Pull Arm, Heavy Duty, Cat II, RH\LH$
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Item #: 111387, Ref: AR77530) $310.00

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $11.30

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.50

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.20

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.70

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.70

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Item #: 161847, Ref: AL40957) $22.30

Valve Seat Insert, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Item #: 173513, Ref: T28538) $20.30

Valve Spool, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Item #: 151029, Ref: R54969) $26.30

Hydraulic System

Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432) $16.10

Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360) $3.80

Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822) $3.10

Hydraulic Pump Drive Coupler Half - Two required for 1 complete coupler. For tractor models JD300, JD301, JD400, 301A, 302, 3030, 3120, 3130, 401B, JD380, 401C, 480C, (830, 930 SN# 258366 and up), (1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 1030 all with small pump). (Item #: 113925, Ref: R38348) $12.30

Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569) $14.70

Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202) $7.90

Hydraulic Pump Shaft - Hydraulic Pump Drive Shaft is 4.77 inches long with a 0.877 inch diameter, keyed hole. It is used with coupling parts R78202, L34432 and L34569. It replaces original part number T22914 (Item #: 121446, Ref: T22914) $42.00

Rockshaft Cover Gasket - This Rockshaft Cover Gasket (Lift Cover Gasket) Fits John Deere Tractor (s) 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1040, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040 (s/n 349999-earlier), 2040S, 2120, 2130, 2140, 2240 (s/n 349999-earlier), 2440, 2630, 2640. Construction and Industrial: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C. Replaces L41551, L34401, T21641 (Item #: 161832, Ref: T21641) $13.90

Lights

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.10

PTO / Driveline

PTO Brake Band - This PRO Brake Band is used on John Deere 1020, 1520, 2020, 830, 930, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 301A, 401B, 401D. Replaces AR58605 and RE44253 (Item #: 163796, Ref: RE44253) $86.00

PTO Shaft, 540 RPM - 31.250" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2240, 2630, 301A, 302, 401B, 820, 830, (920 up to SN# 178089), 300B, 302A, 401C, (2440, 2640 SN# up to 340999). (Item #: 167804, Ref: R47249) $337.00

Steering

Center Steering Arm - This Center Steering Arm is used on the following non-adjustable front axles: 300B, 302, 302A, 310B, 401B, 401C, 2640 serial number 341000 and up, 301A. Replaces AT52867, AT32476 (Item #: 104928, Ref: AT52867) $372.00

Center Steering Arm - Used on John Deere models with adjustable swept back axles: 302 below 341648, 401B below serial number 341648, 2440 below serial number 340999, 2640 below serial number 340999, 301A below serial number 341648. This Center Steering Arm (Bellcrank) replaces those marked R71081 (Item #: 104927, Ref: AR93358) $298.00

Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Item #: JD8827) $21.76

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $63.00

$John Deere 401B Spindle, RH\LH$
Spindle, RH/LH - Measures A= 10.125", B= 1.750", C= 1.795", D= 1.312". For tractor models (300 SN# 136912 and up), 300B, 302, 302A, (310 SN# up to 237997), (400 SN# 136912 and up), 401, 401B, 401C, (480 SN# 136912 and up), 480A, 480B, (2640 SN# 341000 and up with straight non adjustable axle), 301A. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 104772, Ref: AT33636) $548.00

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $9.90

Steering Arm, LH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104947, Ref: T21520) $252.00

Steering Arm, RH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Item #: 104946, Ref: T21519) $263.00

Tie Rod Assembly - For JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with Fixed Front Axles. Tie Rod Assembly (Item #: 104861, Ref: AT19823) $108.04

Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Item #: 102248, Ref: AT27130) $29.00

Tie Rod Tube - 14.44 inches long, .875 inch left hand/right hand thread. For tractor models (JD380, JD480A, JD480B all with fixed axles), (JD300, JD400, JD480, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with fixed front axles), (JD310 with fixed front axle serial number up to 237997), (JD401 all with fixed front axle standard with JD401A loader). (Item #: 104822, Ref: T22948) $60.00

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Item #: 104823, Ref: T25901) $21.40

Wheels

Wheel Bolt - This wheel bolt fits the following John Deere tractor models using the R49839 and R47076 hubs: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, and 4240. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: AA4173R and AT11920. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub - This wheel hub fits the following John Deere tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1520, and 1640. Replaces the part number T21545. Uses wheel bolt WB916 and hub cap A1555R. (Item #: 102234, Ref: T21545) $67.87

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref: A1555R) $10.80

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.60

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.40

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.30

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.30

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$John Deere 401B Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere 401B Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 401B Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 401B Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere 401B Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 401B Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 401B Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere 401B Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $51.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00