FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 4400 Tractor Parts

[Categories] [All John Deere Models] [Print]

Belts

Belt - Alternator - For John Deere tractor models 3120, 3320, 3520, 3720, 4200, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Replaces John Deere OEM number LVU11662, LVU11661, 1/2" X 43" A-Section, (Item #: 123145) $4.50

Deck Drive Belt - For John Deere tractor models 2032R, 2038R, 3033R, 3038R, 3039R, 3045R, 3046R, 4010, 4100, 4115, 4200, 4210, 4300, 4400, 4500, 4600, 4700, Replaces John Deere OEM number M136137, Color: Black, Length: 145.354", Material: Kevlar Cord, Thickness: .426", Type: Wrapped, Width: .625", (Item #: 164973) $30.98

Deck Drive Belt - For John Deere tractor models 2210 (60" Deck), 4010 (60" Deck), 4100 (60" Deck), 4110 (60" Deck), 4115 (60" Deck), 4210 (60" Deck), 4310 (60" Deck), 4400 (60" Deck), 4410 (60" Deck), Compatible with John Deere Lawn and Garden (s) F911 (60" Deck), F912 (60" Deck), F915 (60" Deck), F930 (60" Deck), F932 (60" Deck), F935 (60" Deck), F1145 (60" Deck), Replaces John Deere OEM number M117636, (Item #: 164975) $43.60

Brakes

Brake Disc - For John Deere tractor models 4120, 4200, 4210, 4300, 4310, 4400, 4410, Replaces John Deere OEM number YZ80748, ID: 1.416", OD: 6.015', Thickness: .127", (Item #: 128182) $72.00

Cooling System

No
Picture
Radiator - For John Deere tractor models 4200, 4210, 4300, 4310, 4400, Replaces John Deere OEM number LVA12158, (Item #: 170165) $324.00

Water Pump - This new water pump is used on Yanmar build John Deere Models: 770, 870, 970, 1070, 575 SKIDSTEER, 4300, 4400, 4500, 4600, 4310, 4410, 4510, 4610, 4710. Replaces AM881340, AM881419, M805843, MIA880461. DOES NOT INCLUDE MOUNTING GASKETS - NOT AVAILABLE FROM YESTERDAYS TRACTORS. (Item #: 164803, Ref: MIA880461) $99.00

Water Pump Repair Kit - The Water Pump Repair Kit is used to repair a RE19944 water pump. The RE19944 water pump is used on many John Deere pieces of equipment. Replaces RE37483, RE11345, RE62658 (Item #: 128473, Ref: RE11345) $40.70

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 3300, 3430, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4400, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5103, 5105, 5200, 5203, 5205, 5210, 5303, 5310, 5310N, 5320, 5320N, 5400, 5403, 5410, 5420N, 5440, 5460, 5510, 5510N, 5520, 5520N, 5720, 6100, 6500, 6600, 7020, 7445, 7450, 8430, 8440, 8640 and 9400. (Item #: 164008, Ref: AR101549) $9.70

Drive Train

No
Picture
Idler Sprocket - Idler sprocket, 17 teeth, 1/2 bore, RC50 chain for combines: 55, 95, 105, 3300, 4400, 6600 and 7700. May be used for AH87204, AH98176. For 105, 3300, 4400, 55, 6600, 7700, 95 (Item #: 118151, Ref: TP-AH21440) $24.10

Electrical System

Alternator - Remanufactured alternator with heavy duty internal regulator. 80 amp~ and uses a 3 terminal plug. For tractors: 4020, 4030, 4230, 4320, 4430, 4620, 4630, 6030, 7020, 7520, 8430, 8630~ Combines: 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 8820. Forage harvesters: 5200, 5400. Replacement For 1020, 2020, 2510, 2520. (Item #: 110572, Ref: TP-TY6600) $116.00

Alternator - 12 volt, 90 amp. For tractor models (4400 1970-82 with 329 dsl), (4420 1980-86 with 359 dsl), (6600 1973-77 with 329 dsl), (6600 1978-82 with 404 dsl), (6602 1973-74 with 362 gas), (6602 1971-82 with 404 dsl), (6620 1979-88 with 466 dsl), (6622 1980-85 with 466 dsl), (7700 1970-82 with 404 dsl), (7720 1983-89 with 466 dsl), (7722 1986-89 with 466 dsl), (8820 1983-92 with 466 dsl), (9400 1989-93 with 466/359 dsl), (9500, 9600, 9650 1989-93 with 466 dsl), (7440 1984-86 with 359 dsl), (7445 1987-94 with 359 dsl), (9920 1983-87 with 359 dsl), (9930 1987-93 with 359 dsl to SN# 2000), (9940 1983-86 with 466 dsl), (9950 1987-90 with 466 dsl), (3430, 3830, 3930 1985-92). Repalces 8MR2030T. (Item #: 109803, Ref: AMO0014) $240.00

Alternator - 12 volt, 72 amp. For tractor models (3300 with 219 DH03 or GH01 engine), (4000 up to SN# 263481 with air), (4020 SN# 201000-263481 with air), 4400, 55, 6622, 7700, (4520 with air), (4620 up to SN# 014117 with air), (6600 SN# 206201 and up), (6602 SN# 212801-353900), (6620, 7720, 8820 up to SN# 600000), (7020 up to SN# 002263), (7440 up to SN# 1000), (9910 SN# 3056 and up), (9920 up to SN# 380, (9940 up to SN# 1500). Replaces TY6603, AR43989, AH10552D. (Item #: 113321, Ref: TY24309) $198.00

Compressor, 12 volt - Remanufactured, with clutch, 1 groove 5.58" pulley. For tractor models (4400, 7700 1975 and up), (4420 SN# up to 610100), 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 6600, (6620, 7720, 8820 up to SN# 600000), 7020, 7520, 8430, 8440, 8630, 8640. *** NIS *** (Item #: 109093, Ref: AR77343) $410.00

No
Picture
Ignition Switch - For John Deere tractor models 4200, 4300, 4400, 4500, 4600, 4700, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5105, 5200, 5205, 5210, 5220 (s/n 220177-earlier), 5300, 5310, 5310N, 5320N (s/n 238109-later), 5400, 5400N, 5410, 5420, 5420N (s/n 248002-later), 5500, 5500N, 5510, 5510N, 5520N (s/n 258223-later), 5600, 5605, 5700, 5705, 6300, 6500, 6600, 7500, 7505, Compatible with John Deere Combine (s) 1165 (s/n 37491-later), 1170 (s/n 38095-later), Replaces John Deere OEM number RE264579, RE45963, (Item #: 180986) $32.60

Starter - 12 volt, 9 teeth, clockwise rotation. For model 4400 Combine. Replaces S-1443, 240048M91, 79004854, AH76330, SDR0106, SR535X, SX1015, SX1016, S2777, S2777, TY1454, TY6693, 10496877, 1107233, 1107273, 1107274, 1107315, 1107497, 1107643, 1107664, 1107688, 1107889, 1107891, 1108332, 1108355, 1108360, 1108368, 1108372, 1108486, 1108489, 1108784, 1108787, 1108793, 1109078, 1109099, 1400-0181, 1876553, 1938508, 1998256, 1998275, 1998473, 2-1601-DR, 248048M91, 323-371, 351088, 3635, 3635-S, 3635-SN, 3635-WS, 44-4387, 46-4803, 50-34105, 91-01-3821. Note: This starter is also used in many Chevy / GM vehicles 1957-1990. Verify starter number. (Item #: 117727, Ref: S-1171) $128.00

Starter - 12 volt, 13 tooth, CW rotation. For tractor models (45 1966-70 with 202 dsl), (55 1967-70 with 303 dsl), (95 1966-70 with 303 dsl), (932, 942, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, (2254 to SN# 68583), (3300 1971-77 with 219 dsl), (4400 1970-82 with 329 dsl), (4420 1980-86 with 359 dsl), (4425 1986-88 with 539 sl), (4435 1989-94 with 539 dsl), (6600 1973-74 with 329 gas), (6600 1973-77 dsl), (482 1979 dsl), (484 1979 with 329 or 359 dsl), (499, 699 1973-79 with 329 dsl), (6000 1975-78 with 219 dsl), (7440 1984-86 with 359 dsl), (7445 1987-94 with 359 dsl), (9900 1975-78 with 329 dsl), (9910, 9920 1984-87 with 359 dsl), (9930 1987-93 with 359 dsl), (600, 700, 734 1973-78 with 152 dsl), (6500 from 1995 and up), (940 1980-84), (940 built in Spain), (940V SN# 126012 and up), (1040 1970-84), (1040, 1040V SN# 126012 and up), (1140 1970-82). Replaces 1107863, 1362312, 1367075, 1107871, 1998367. (Item #: 156209, Ref: SND0044) $144.00

Starter - 12 volt, 9 tooth, clockwise rotation. For model : 4400 1970-72 with 292 gas engine. Replaces 1108489, 1108368. (Item #: 117727, Ref: SDR0106) $128.00

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.50

Engine Bearings

Differential Side Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4400, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R54182, R63477, Use Thrust Washer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496839) $75.01

No
Picture
Main Bearing Set - Available in STD, .010, .020, .030 For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. Specify size in Comments box when ordering. (Item #: R-RE27352S6) $113.49

Engine Gaskets

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Item #: 176661, Ref: R97351) $11.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 540E, 540G, 548D, 548E, 640, 640D, 640E, 640G, 648D, 648E, 648G, 740E, 748E, 570, 570A, 570B, 670, 670A, 670B, 672A, 672B, 240, 250, 260, 320, 4400, 4500, 344E, 344G, 444, 444C, 444CH, 444D, 444E, 444G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 624E, 624G, 6000, 6100, 6500, 6600, 1030, 1030OU, 1030VU. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.00

No
Picture
Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Item #: 106935, Ref: R-RE38859) $175.00

Head Gasket Set - For tractor models 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. (Item #: 106885, Ref: R-RE38852) $84.00

No
Picture
Rear Main Seal - For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Item #: 106854, Ref: R-RE24959) $25.70

Engine Parts

Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Item #: 109500, Ref: R74194) $2.50

Crankshaft - For 2840, 2940, 2950, 2955 to SN# 927838, 3150, 3155 to SN# 927838, 4030, 4050 with 6359, 4400, 4420, 4425, 4435, 6600, 9400 with 6359 to SN# 337245, 9900, 9910, 9920, 9930. All with 6 cylinder 329 or 359 Diesel Engine. Crankshaft with gear, less bearings. New. Marked T23266, T23267. (Item #: 140550, Ref: AT22562) $959.00

Cylinder Head, Used - For John Deere tractor models 4300, 4310, 4400, 4410, Replaces John Deere OEM number AM880362, Replaces John Deere Casting nos 3TN75, 3TNE88-EJTS, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 203897, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403897) $445.01

Injection Pump Drive Gear, Used - For John Deere tractor models 790, 870, 970, 990, 1070, 4115, 4200, 4300, 4400, 4500, 4510, 4600, 4610, 4700, Compatible with John Deere Skid Steer Loader(s) 570, 575, 675, 675B, 4475, 5575, 6675, 7775, Compatible with John Deere Construction and industrial models 25, 30, 50, 110 (s/n 311032-earlier), Compatible with John Deere UTV(s) ProGator 2030A, Compatible with John Deere Lawn and Garden(s) F1145, 1600, Replaces John Deere OEM nos M801239, Teeth: 56, For Keyed Shaft, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437405) $53.01

Ring Gear, Flywheel - For tractor models 3010, 3020, 4400, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8570. For Diesel Engines: 6404, 6466, 6359, 6068, (6.8 liter), 6076 (7.6 liter) in combines: 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9500, 9600. For diesel engines: 6404, 6466 in Forage Harvestors: 5200, 5400, 5440, 5720, 5730. Starter Flywheel Ring Gear. (Item #: 103942, Ref: TP-R28811) $43.10

No
Picture
Valve Guide, Intake - For model 750, intake and exhaust guide For tractor models 855, 856, 4200, 4300, 4400. (Item #: CH16041) $16.54

Engine Pistons and Sleeves

No
Picture
Sleeve Assembly (6 Required) - 4.020 Bore with 1 3/8 Piston Pin For 2840, 3130, 3530, 4030, 4400, 4425 with 329 Diesel Engine (From S#277549) (Item #: R-AR78041) $125.56

Exhaust System

Muffler, Horizontal - Round body 7" shell diameter, A= 4" inlet length, B= 2-3/4" inlet I.D., C= 20" shell length, D= 2-1/2" outlet length, E= 2-1/2" outlet O.D., F= 23" overall length. For tractor models (3300, 4400, 4420, 6600, 6620 all Combines). (Item #: 102088, Ref: AH87289) $180.98

Fuel System / Air Intake

Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517) $28.50

Fuel Filter - 3.49" tall. For Yanmar built models 1050, 2500, 2653, 4200, 4300, 4400, 655, 755, 756, 770, 790, 850, 855, 856, 950. Replaces HA13040000A4, FEM4108, CH10479, M801101, 16271-43560, 1627143560, L4103F, 124550-55700, 12455055700 (Item #: 120083, Ref: M801101) $15.10

Fuel Filter - This is a dual-stage box-style metal Fuel Filter. It measures 5-1/8 inches X 3-11/16 inches X 3- 7/32 inches. Replaces FEM4032, FFP556745, P556745, FF5045, SN5045, AR86745, LFF1129, RE27091, LFF1129, WK8106, 26663 (Item #: 111141, Ref: 74036432) $37.40

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Lift Pump - For John Deere tractor models 655, 755, 756, 790, 855, 856, 955, 2025R, 2305, 2320, 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Compatible with John Deere Construction and industrial models 110, Compatible with John Deere Lawn and Garden (s) 1445, 1545, 1565, 1600, 1620, Replaces John Deere OEM number AM882588, (Item #: 169741) $39.90

Fuel Sending Unit - For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Replaces John Deere OEM number LVA12714, (Item #: 119742) $47.10

No
Picture
Fuel Sending Unit, Used - For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Replaces John Deere OEM number LVA12714, For a new version of this item use Item #: 119742, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445532) $26.22

Fuel Solenoid - For John Deere tractor models 790, 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4700, 4710, Compatible with John Deere Construction and industrial models 35D, Replaces John Deere OEM number M810324, (Item #: 161946) $27.50

Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Item #: 111144, Ref: AR50041) $23.40

Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626) $18.00

Gauges

Instrument Gauge Cluster - For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Replaces John Deere OEM number LVA10560, AM122798, LVA10308, (Item #: 146694) $200.00

Instrument Gauge Cluster, Used - For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, Replaces John Deere OEM number LVA10560, AM122798, LVA10308, LVA11497, For a new version of this item use Item #: 146694, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499737) $170.01

Hitch / Drawbar

Straight Drawbar - For John Deere tractor models 3032E, 3038E, 3120, 3203, 3320, 3520, 3720, 4105, 4200, 4210, 4300, 4310, 4400, 4410, Replaces John Deere OEM number M123824, Hole Size: .827" - Tractor End/ 1.024" Implement End, Length: 27.559", Thickness: 1.000", Width: 2.000", (Item #: 163553) $97.00

Hydraulic System

Hydraulic Filter - Outside diameter 3.81 inch, inside diameter 1-3/8 inch, height 4.47 inch. Replaces AM102723. For tractor models: 4100, 4110, 4115, 4200, 4300, 4400, 4500, 4600, 4700, 4710, 655, 755, 756, 855, 856, 955. (Item #: 156462, Ref: AM102723_) $32.70

Hydraulic Pump - For John Deere tractor models 4200, 4300, 4400, 4500, 4600, 4700, Replaces John Deere OEM number LVA10330, (Item #: 162219) $368.00

Hydraulic Pump - For John Deere tractor models 4300, 4400, Replaces John Deere OEM number LVA10329, (Item #: 162220) $400.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.00

Flasher Control Switch - Used on John Deere, Case, International and Allis Chalmers equipment, this Flasher Control Switch replaces OEM numbers 71362888, 87271837, 131209C91, 131066C91, AR64422 (Item #: 150918, Ref: AR64422) $82.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Oil System

Oil Filter - Oil filter element, spin-on type. For tractor models 4040, 4230 diesel, 4240, 4320, 4430, 4400, 4520, 4620, 4630, 4640, 4880, 6030 (6531A), 7020, 7520, 8430, 8440, 8630. Combines: 6600 Hill Side (6404TH), 6602 (6404DH), 6620, 6622, 7700 (6404DH and TH), 7720, 882 For 4000, 4010, 4020 (Item #: 111131, Ref: TP-AR43634) $29.00

Oil Filter, Spin-On Type - This oil filter measures 3 11/16 inches outside diameter, 5 13/16 in length and is 13/16 16 thread. For Cotton Pickers/ Strippers: 482, 484, 9900, 9910. For 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2240, 2250, 2255, 2270, 2280, 2350, 2355, 2420, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3300, 4030, 4400, 4420, 482, 484, 6600, 6602, 7700, 9900, 9910. Replaces BT259, T19044T, TPT19044, T19044, AR58956, 7000014640, 70000-14640, 6511730, A18A303, A-18A303, 720801, WIX 51243. (Item #: 111133, Ref: TP-T19044) $7.60

Oil Pressure Switch - For Models: John Deere (TRACTOR: 430), (COMPACT TRACTOR: 655, 755, 756, 855, 856, 955, 2020A, 2030A, 4200, 4300, 4400, 4500, 4600), (INDUSTRIAL/CONSTRUCTION: 80, 244H), (SKID STEER LOADER: 570, 575, 4475, 5575, 6675, 7775), (RIDING MOWER: GX355, X495, X595, X740, X744, X748, X749, X950R, 355D, 415, 425, 445, 500, 1435, 1445, 1545, 1600, 1620, 3245C), (FRONT MOUNT MOWER: F735, F1145, 1420, 1565, 7200, 7400, 8400), (FAIRWAY MOWER: 3215, 3215A, 3215B, 3225B, 3225C, 3235, 3235A, 3235B, 3235C, 7500, 7700, 8500, 8700, 8800) (Item #: 164653, Ref: AM100856) $8.98

Oil Pump - For 3300, 350A, 350B, 350C, 350D, 400, 401, 401A, 410, 440, 440A, 440B, 4400, 450, 450A, 450B, 480, 480A, 499, 5000, 5200, 5300, 5400, 5400N, 5500, 6602, 6620, 820, 830, (3164D, 3179, 4039D, 4039T, 4219DF, 4239D, 4239T, 6059D, 6059T, 6329D, 6359D, 6359T, ALL DIESEL ENGINES). Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Item #: 114022, Ref: RE35685) $69.00

Seats

Bottom Seat Cushion - Bottom seat cushion, brown cloth, made to fit Personal Posture Seat. Heavy Duty Fabric On High Density Foam, Steel Back for Mechanical Suspension. Replaces John Deere Part Number AR76515 (Item #: 101296, Ref: AR76515) $101.00

Seat Cushion, Back - This is a brand new original fabric personal posture back cushion with steel back for hydraulic or mechanical seats with five position lumbar support . It fits multiple John Deere models. It does not contain brackets or hardware. Replaces John Deere part numbers RE12049, AR71107 (Item #: 101297, Ref: AR71107) $135.00

Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. Used SBK400 Bracket Set, not included. The bottom cushion in this set is 3 1/2 inches thick. Replaces R34618, R34619, R34620, TY26545 (Item #: 109348, Ref: JD5678) $286.00

Seat Cushion Set, 2 Piece - This Seat Cushion Set is Yellow Vinyl on Steel. It is used on John Deere Combines: 3300, 4400, Sprayer: 6000, Swather / Windrowers: 2320, 2420, 830, Tractors: 1010, 1020, 1520, 2020, 2030, 2040, 2130, 2150, 2155, 2250, 2255, 2350, 2440, 2550, 2555, 2630, (2640 below serial number 40999), 2750, 2755, 2955, 830 (3 Cyl.) Replaces AR65448, AR65449, TY9379-6 (Item #: 101288, Ref: AR65448-6) $160.00

Sheet Metal / Body Parts

Side Plate - Left Hand - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4400, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R31513, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126553) $32.15

No
Picture
Weight - Suitcase, Front - For John Deere tractor models 650, 655, 670, 750, 755, 770, 790, 850, 855, 870, 950, 955, 970, 990, 1023E, 1025R, 1026R, 1050, 1070, 1250, 2025R, 2032R, 2210, 2305, 2320, 2520, 2720, 3005, 3032E, 3033R, 3038E, 3039R, 3046R, 3120, 3203, 3320, 3420, 3520, 3720, 4005, 4010, 4044M, 4044R, 4052M, 4052R, 4066M, 4066R, 4100, 4100N (all compact tractors), 4105, 4110, 4115, 4120, 4200, 4210, 4300, 4310, 4320, 4400, 4410, 4500, 4510, 4520, 4600, 4610, 4620, 4700, 4710, 4720, Replaces John Deere OEM number BM19780, Color: Green, Weights: 70 lbs, Thickness: 2-1/2 ", (Item #: 128784) $96.00

Steering

$John Deere 4400 Dana \ Spicer® Tie Rod Assembly$
Dana / Spicer® Tie Rod Assembly - For John Deere tractor models 3120, 3203, 3320, 3520, 3720, 4105, 4200, 4210, 4300 (axle marked S20BZ107-1), 4400 (axle marked S20BZ107-1), 4410, Replaces John Deere OEM number LVA14950, LVA10668, Manufactured by Dana Spicer to exact OEM specifications, Length: 33.622", 5/8" - 18 UNF, (Item #: 167345) $227.00

Power Steering Pump, Used - For John Deere tractor models 4200, 4300, 4400, 4500, 4600, 4700, Replaces John Deere OEM number LVA10330, Replaces John Deere Casting nos S20BZ107-1, 8.2 cc, For 2 WD Axles and 4WD axles marked S20BZ108-1 and S20BZ112-1, For a new version of this item use Item #: 162219, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430797) $205.01

Tie Rod - For John Deere tractor models 4200 (2WD), 4210 (2WD), 4300 (2WD), 4310 (2WD), 4400 (2WD), Replaces John Deere OEM number LVU14549, Length: 3.50", 1/2-20 UNF RH Thread, (Item #: 160197) $25.30

Tie Rod End - For John Deere tractor models 4200 (2WD), 4210 (2WD), 4300 (2WD), 4310 (2WD), 4400 (2WD), Replaces John Deere OEM number LVU14531, (Item #: 161828) $59.00

Tie Rod End - Right Hand - For John Deere tractor models 3120, 3203, 3320, 3520, 3720, 4120, 4200, 4210, 4300, 4310, 4320, 4400, 4410, 4510, 4520, 4600, 4610, 4700, 4710, 4720, Compatible with John Deere Construction and industrial models 110, Replaces John Deere OEM number LVA10728, Length: 4.00", 1.00-16 UN Right Thread, Fits Right Hand Side, (Item #: 156080) $64.00

Tie Rod - Left Hand - For John Deere tractor models 3033R, 3039R, 3046R, 3120, 3203, 3320, 3520, 3720, 4044M, 4044R, 4052M, 4052R, 4066M, 4066R, 4105, 4120 (s/n 470001 - later), 4200, 4210, 4300 (Axle Marked S20BZ107-1), 4310, 4320 (s/n 470001 - later), 4400 (Axle Marked S20BZ107-1), 4410, 4500, 4520 (s/n 470001 - later), 4600, 4700 (Axle Marked S20BZ108-1 or S20BZ112-1), 4720 (s/n 470001 - later), Replaces John Deere OEM number LVA14960, Fits Left Hand Side, LH Thread, M24 x 1.5 LH Thread, (Item #: 157742) $75.00

Wheels

No
Picture
Retainer Adjusting Screw, Used - For John Deere tractor models 4000, 4200, 4400, 4410, 4500, 5200, 7200, Replaces Ford OEM nos C3NN1085A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442232) $22.51

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.60

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.40

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.30

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.30

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$John Deere 4400 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere 4400 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 4400 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 4400 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere 4400 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 4400 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 4400 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere 4400 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $51.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00