Belt - Compressor - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 7020, 7520, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600 (s/n 305673-later), 6620 (s/n 615041-earlier), 6622, 7700 (s/n 163901-later), 7720 (s/n 614501-earlier), 8820 (s/n 615401-esrlier), Compatible with John Deere Harvester (s) 5200, 5400, 5420, 5440, 5460, 5720, 5820, Compatible with John Deere Construction and industrial models 690, 690B, 693, 693B, 744, 744E, 750, 755, Replaces John Deere OEM number R71603, 17415, Length: 41.5", Width: 1/2", Thickness: .303", Material: polyester cord, Belt type: raw edge laminate, Color: black, (Item #: 114010)$6.80
Brakes
Brake Bushing - This bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Used as a brake or clutch pedal bushing on the following models: 4030, 4040, 4050, 4055, 4230, 4255, 4240, 4430, 4440, 4455, 4630, 4640, 4650, 4840, 4850, 8020, 8430, 8630. Replaces R51192. (Item #: 126143, Ref: A1197R)$9.50
Brake Center Plate, Used - For John Deere tractor models 4040, 4050 (Hi-Crop before s/n 006509), 4240, 4250 (Hi-Crop), 4350, 4440, Replaces John Deere OEM number R58758, Diameter: 15.000", Teeth: 14, For a new version of this item use Item #: 105615, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405615)$30.01
No Picture
Brake Disc - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, Replaces John Deere OEM number AR66749, AR72373, Riveted linings (pads) are not included, (Item #: 105609)$286.00
Brake Disc, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, Replaces John Deere OEM number AR66749, AR72373, Marked R59931, R79409, R60119, R50585, R40153, R40152, R59934, R60116, R33817, Rivited Pads, Check thickness of lip on inside of plate. Could be either 3/8", 1/2", or 1 1/8", For a new version of this item use Item #: 105609, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405609)$71.01
Brake Pad - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number AR28487, R26969, R90085, 2-1/2" X 6-1/2", Mounting rivets not included, 6 pads required per side, 12 total for tractor, (Item #: 165736)$20.30
No Picture
Brake Pad Rivets - For John Deere tractor models 3010, 4010, 4040, 4230, 4240, 4320, 4430, 4440, 4450, 5010, 5020, 6030, Replaces John Deere OEM number R2593, Pack of 20, Length: .671", (Item #: 180902)$9.70
No Picture
Brake Pad Rivets - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R1761, Pack of 20, Length: 1/2", (Item #: 180907)$8.90
Brake Pad Rivets - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860, Replaces John Deere OEM number D1761R, D1761, Length: 0.481", Width: 0.182", Package of 36, Most brake pads require 6 rivets per pad, (Item #: 189180)$7.50
Brake Pad Rivets - For John Deere tractor models 3010, 4000 (Hi-Crop), 4010, 4020 (Hi-Crop), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 5010, 5020, 6030, Compatible with John Deere Construction and industrial models 570, 570A, 644A, 644B, 700A, 743A, 760A, 860, Replaces John Deere OEM number D2593R, Diameter: .182", Length: 0.671", Package of 18, (Item #: 189218)$5.30
Brake Pad Rivets - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860, Replaces John Deere OEM number D1761R, D1761, Length: 0.481", Width: 0.182", Package of 36, Most brake pads require 6 rivets per pad, (Item #: 190752)$9.90
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Item #: 105607, Ref: AR28487)$18.40
Brake Plate - This Breake Plate is 15 inches in Diameter with a 15 Tooth hub with 4 1/4 inch diameter. The teeth have a 1/4 inch flat tip. Use with Brake Shaft R33431 and R45799 For 4000, 4020, 4230, 4320, 4430, 4440. (Item #: 105617, Ref: R78430)$101.95
Brake Plate - Can be used with R59696 Pinion Gear and R59698 Pinion Shaft. 15.1875 Diameter - 14 Teeth. For 4040, 4240, 4440 (Item #: 105615, Ref: R3077)$80.00
Brake Plate and Piston, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8640, 8850, Compatible with John Deere Construction and industrial models 570, 570A, 600, 644A, 646, 646B, 740, 740A, 743A, Replaces John Deere OEM nos AR32243, Lining Width: 2 7/16", Plate Width: 3 1/8", Piston Diameter: 1 7/8", Riveted Lining, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498300)$25.01
Brake Plate and Piston, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, Replaces John Deere OEM nos R48240, AR32243, Lining Width: 3", With rivited linings, Plate Width: 3 3/8", Piston Diameter: 2 1/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497651)$20.01
Brake Plate and Piston, Used - For John Deere tractor models 700, 3020 (s/n 123), 4000 (s/n 201), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 5010, 5020, Compatible with John Deere Construction and industrial models 500, 510, 540, 544, 570, 624, 640, 644, 646, 670, 672, 710, 762, Replaces John Deere OEM nos R48240, RE234308, RE32681, Plate Width: 3 1/8", Piston Diameter: 2-1/4", Lining Width:2 7/16", With rivited linings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498849)$30.01
Brake Plate with Linings, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, Compatible with John Deere Construction and industrial models 544B, 544D, 644D, 644E, 646, 646B, 646C, 762B, Replaces John Deere OEM nos RE46332, RE33013, Replaces John Deere Casting nos R59931, R60116, R79409, R97786, Bonded Pads, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499623)$110.01
Brake Valve, Used - For John Deere tractor models 4030, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, Replaces John Deere OEM nos AR59280, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435042)$234.01
Planetary Brake Clutch Pack Plate - 4th - For John Deere tractor models 2510, 2520, 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440 (All With Powershift Transmission), Replaces John Deere OEM number R48235, AE52288, R33871, R33873, O.D.: 11.600", I.D: 9.710", (Item #: 127089)$54.00
Planetary Brake Kit - Kit includes 13 friction discs, 13 separator plates, and 10 seals. For tractor models 4430, (4440 SN# 027783 and below). (Item #: 173225, Ref: PBK560)$1849.01
Planetary Brake Kit - Kit includes 15 friction discs, 15 separator plates, 10 seals. For model 4440 SN# 027784 and up. (Item #: 173227, Ref: PBK580)$1591.04
Planetary Brakes Clutch Pack Plate - For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission), Replaces John Deere OEM number R48236, R33872, O.D.: 11.620", I.D.: 9.700", (Item #: 117041)$29.98
Clutch
Clutch Backing Plate - Part number R50341 is a new part, manufactured to OEM specifications. It is used on John Deere models: 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430 (Quad and Syncro Range Transmission), 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission), 4555 (Quad Range Transmission), 4560 (Quad Range Transmission), 4630, 4640 (Item #: 173246, Ref: R50341)$364.00
Clutch Bolt - For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number R51230, (Item #: 165430)$5.10
No Picture
Clutch Cover, Used - For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630, Replaces John Deere OEM number R50156, For a Remanufactured version of this part use Item #: 205845, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433697)$147.01
Clutch Disc, Transmission - Replacing part numbers AR89320, AR95827, RE234264, AR67710 and AR95827, this disc measures; inside diameter 7 inches (78mm) with 48 teeth and 22 - 0.248 inch (6.3mm) holes, outside diameter 12 inches (305mm). Used on John Deere 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 8430, 8440, 8450, 8630, 8640, 8650, 8850. Prices and sold individually. (Item #: 127056, Ref: AR95827)$50.00
Clutch Drive Plate, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM nos R81922, OD: 7 3/4, ID: 5 3/8, Outer Ear to ear: 8 1/2, Thickness: 1/8, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440346)$10.01
Clutch Housing Gasket - Used on John Deere models: 4040, 4230, 4240 serial number below 007434, 4430, 4440 serial number below 014820. Replaces John Deere part number R50335 (Item #: 152017, Ref: R50335)$14.90
Clutch Lever Pin - Part number R31131 is a clutch lever pin used on John Deere models: 500, 600, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 8430 Model Year 1974-1981, 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8850, 8960 (Item #: 172865, Ref: R31131)$8.10
Clutch Pedal Bushing - This bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Used as a brake or clutch pedal bushing on the following models: 4030, 4040, 4050, 4055, 4230, 4255, 4240, 4430, 4440, 4455, 4630, 4640, 4650, 4840, 4850, 8020, 8430, 8630. Replaces R51192. (Item #: 126143, Ref: A1197R)$9.50
Clutch Pedal Return Spring - For John Deere tractor models 2010, 2510 (With Powershift), 2520, 3020 (With Powershift), 4020 (With Powershift), 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 8430, 8630, Replaces John Deere OEM number R43684, R33179, Length 7.520", O.D. 1.161, (Item #: 126157)$14.60
Clutch Plate - Used on John Deere 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, this New Clutch Plate is manufactured to Original Equipment Manufacturer's specification. (Item #: 173336, Ref: R57330)$309.00
Clutch Pressure Plate - Used in torsional damper (Power Shift). 9.630" I.D., .375" thick, 3 tang. For tractor models 4040, (4230 from SN# 016359), 4240, 4240 Euro edition, (4430 from SN# 022373), 4440, 4440 Euro edition, (4630 from SN# 008455), 4640, 4840. Replaces R56720. (Item #: 164486, Ref: R76731)$80.00
Clutch Regulating Valve Assembly, Used - For John Deere tractor models 4040, 4040S, 4230, 4240, 4240S, 4350, 4440, 4640, 8430 (1974-1981), 8450, 8630, 8650, 8850, Replaces John Deere OEM nos R66623, AR102797, R57743, Replaces Casting nos R73809, R59597, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448006)$780.01
Clutch Spring - Three of these springs are used per tractor on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630. Sold individually. (Item #: 173319, Ref: R56960)$3.10
Clutch Valve Housing Gasket - For John Deere tractor models 4030, 4040, 4040S, 4230, 4240, 4240S, 4350, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R99386, R59598, (Item #: 179542)$3.10
Clutch Valve Housing, Used - For John Deere tractor models 500, 600, 2510, 2520, 4000, 4020, 4040 (s/n 001919-earlier), 4230, 4240 (s/n 004111-earlier), 4430, 4440 (s/n 008895-earlier), 4630, 4640 (s/n 004942-earlier), 4840 (s/n 002950-earlier), Compatible with John Deere Construction and industrial models 500, 570, 570A, Replaces John Deere OEM nos AR45381, Replaces Casting nos R41151, R33155, R33161, R41153, R41668, R44164, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441114)$270.01
Clutch Valve Housing, Used - For John Deere tractor models 3020, 4000 (s/n 201000-later), 4020, 4040 (s/n 001920-later), 4240 (s/n 004112-later), 4440 (s/n 008896-later), 4520, 4620, 4640 (s/n 004943-later), 4840 (s/n 002951-later), Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540D, 548D, 610B, 640, 640D, 648D, 710B, 710C, 740, 740A, 743A, Replaces John Deere OEM nos AR88040, Replaces Casting nos R67483, R67484, R44164, R41153, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452364)$160.01
Powershift Clutch Kit - For John Deere tractor models 4240, 4440, Replaces John Deere OEM number R830504, Kit Contains: Contents for C1, C2, and Rear PTO Clutches: 8 (R28023) Friction Discs, 3 (R94516) Friction Discs, 9 (R46418) Separator Plates, 2 (R56548) Separator Plates, 1 Manifold Gasket, 1 Housing Gasket, 6 Piston Seals, 2 Seals, 6 Torque Bolts, (Item #: 162966)$1000.00
PTO Clutch Disc - Used on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760. The measurements on this disc are; inside diameter 5 7/8 inches (148mm) with 48 teeth, outside diameter 12 1/16 inches (306mm). Lining Inside Diameter 7.000 inches. Lining Outside Diameter 12.000 inches. Replaces AR60082, RE234306 (Item #: 127049, Ref: RE17420)$72.00
PTO Clutch Hub - Made to OEM Specifications, this New PTO Clutch Hub replaces John Deere part numbers R50123 and R56854. 35 internal teeth, 48 external teeth. It is used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430, 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission) (Item #: 173221, Ref: R56854)$313.00
Ring - For John Deere tractor models 600, 1020, 1030, 1035, 1120, 1130, 1520, 1530, 1630, 1635, 1830, 2020, 2030, 2035, 2130, 2135, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 3135, 4000, 4020, 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 300, 301, 401, 410C, 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 510C, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C, 710D, Replaces John Deere OEM number R26753, (Item #: 165737)$0.50
Traction Clutch Hub - Used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430 (Quad and Syncro Range Transmission), 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission), this hub has 19 splines and 48 Teeth. (Item #: 173339, Ref: R50346)$297.00
Transmission and PTO Clutch Plate - Manufactured to OEM specifications, this new Transmission and PTO Clutch Plate is used on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455. It measures 6 15/16 inches (176mm) inside diameter, 14 1/4 inches (362mm) outside diameter including 6 tabs, 12.140 inches outside diameter without the tabs. Replaces John Deere part numbers R112385, R544016, R62285, R53789, R59688, R62285 (Item #: 127077, Ref: R112385)$143.00
Cooling System
Air Conditioning Compressor - Air conditioning compressor, A6 w/single groove clutch no oil, 12 volt coil at 10 o'clock, new 5.58 inch dia. clutch and dust cover, superheat compressor, high pressure relief valve. SAE thread, Replaces 272003. Tractors: 1640, 2040, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3155, 3350, 3640, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8440, 8630, 8640, 2040S, 2855N, 4040S, 4240S, 8430 4WD. Super Heat switch (part number 220-5000) and M10X50 manifold manifold bolt are not included. Replaces 904014M92, 70735521, 79005837, 79005837GV, 1904014M92GV, 70735521GV, 500001, TPTY6665GV, TP-TY6665GV, TY6665, 1904014M1, 1904014M91, AR60948, AR68802, AR77343, AR92109, RE60697, SE501456, SE501457, SE503047 (Item #: 176869, Ref: TY6665)$1009.01
Air Conditioning Receiver Dryer - 4" x 7-1/2" overall, inlet and outlet#6 female o-ring with sight glass. R12 and R134A compatible. Replaces AL77581, AR59780, AR74486, RE214439, RE291794, RE49169 (Item #: 110938, Ref: RE49169)$33.00
Compressor Conversion Kit - Used to Convert A6 Compressor To New Denso Compressor, this kit contains New Compressor, Conversion Lines, O-rings and Connectors, Hardware and Brackets, Fuse Elimination Kits, Harness with Pressure Switches, Receiver Dryer, Belt. Note: if using R134 freon, order 461-3111 and 461-3112 fittings for charging system ports. For John Deere 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840 (Item #: 111863, Ref: RE233249SPL)$1000.00
Compressor Switch - This is a Super Heat switch use with TY6665 compressor. Replaces AR78501, 220-239, 70262354, 837255M91 (Item #: 121476, Ref: 220-5000)$53.00
Cooling Fan - 8 Blade, Used - For John Deere tractor models 4240, 4240S, 4350, 4430, 4440, 4630, Compatible with John Deere Construction and industrial models 340D, 440C, 440D, 448D, 540B, 540D, 548D, 670A, 670B, 672A, 672B, 693B, 770, 770A, 770AH (s/n 508667-earlier), 770B, 772A, 772AH (s/n 508667-earlier), Replaces John Deere OEM number AR85892, Blades: 8, Diameter: 24", For a new version of this item use Item #: 140625, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498464)$78.01
Fan, 8 Blade - New 8 blade fan has a 24 inch diameter, 1.5 inch pilot hole, and mounting holes on 2 inch center. Used on John Deere 693B industrial, 440C Skidder, 440D Skidder, 448D Skidder, 540B Skidder, 540D Skidder, 548D Skidder, 4240, 4350, 4430, 4440, 4630 (Item #: 140625, Ref: AR85892)$150.00
Fan Belt, Set of 2 - Measuring 1/2 X 66.3 inches, this is a set of two Double Cog Polyester Cord belts. Replaces John Deere part numbers RE29018, AR74662. Used on John Deere Models: 4050 with 6466 engine, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430 Model Year 1974-1981, 8440 (Item #: 114015, Ref: RE29018)$17.10
Fan Shroud - For John Deere tractor model 4440, Replaces John Deere OEM number AR96559, AR80655, (Item #: 146697)$149.00
Hose Support - For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Replaces manufacturer number SHF463, (Item #: 165473)$15.50
Manifold Water Hose - For John Deere tractor models 4240, 4440, 4640, 4840, 6030, 7520, 8430, 8440, 8630, 8640, 8650, Replaces John Deere OEM number TY22404, 1" Diameter, 12-1/4" Long, (Item #: 109965)$5.60
Oil Cooler Condenser - Combination Condenser and Oil Cooler measures 20 1/2 inches wide and 22 inches high. Used on John Deere 4240, 4440, 4640 (Item #: 110198, Ref: AR96767)$510.00
Radiator - For model 4440. Radiator. H: 37 1/2 inches, W: 22 1/2 inches, Side Frame W: 4 inches, Inlet OD: 2 inches, Outlet OD: 2 1/2 inches, Neck H: 1 1/32 inches. Comes with cap. Copper core. This item ships truck freight. Place call for freight quote. (Item #: 101770, Ref: RE21897)$650.00
Radiator Cap - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4440, 4450, 4455, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number RE24897, RE39103, Black Outer Plastic Cover, Inside Diameter: 2.268", Tab to Tab: 2.026", Outside Diameter Cover: 4.385", 10 PSI, (Item #: 165261)$15.50
Radiator Cap - 15 PS, Long Reach - For John Deere tractor models 4040 (s/n 006853-earlier), 4040S, 4050 (s/n 006758-earlier), 4240 (s/n 016194-earlier), 4240S, 4250 (s/n 011743-earlier), 4350, 4440 (s/n 006853-earlier), 4450 (s/n 023186-earlier), 4640 (s/n 015956-earlier), 4650 (s/n 324214-earlier), 4840 (s/n 008634-earlier), 4850 (s/n 322745-earlier), 8440, 8640, 8650 (s/n 00801-earlier), 8850, Replaces John Deere OEM number AR76619, 15 PSI, long reach, narrow lug, (Item #: 126944)$13.20
No Picture
Radiator Cushion Foam Kit - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4240S (6-466T Diesel), 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Compatible with John Deere Combine (s) 6600 (6-404 Diesel), 6622 (6-466T Diesel), Replaces manufacturer number CR91035, Includes: 17 Pieces, (Item #: 176899)$57.00
Radiator Hose - Bulk 10ft x 1/2" - For John Deere tractor models 350, 420, 430, 450, 500, 1010, 2010, 2510, 2520, 3010, 3020 (s/n 122999-earlier), 4040, 4240, 4440, 4520, 4620, 5085M, 5100M, 5220, 5320, 5420, 5520, Compatible with John Deere Construction and industrial models 70, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 315D, 350A, 350B, 350C, 380, 400G, 401B, 401C, 410, 440, 440A, 440B, 450B, 450C, 450D, 455D, 480A, 480B, 482, 482C, 485E, 486E, 488E, 500A (s/n 123113-earlier), Compatible with John Deere Hay Cutting (s) 2320, 2420, 3430, 3830, 4890, 4895, Replaces John Deere OEM number R31543, T11171, TY22562, R32641, R33678, T12397, T12815, T438T, T592T, I.D. (A): 1/2", O.D.: 27/32", Length: 10', Fits Engines: 3164D, 4219DF, 4239D, 4239T, 4039, 4045, 4239D, 4239T, 4239A, 3179DF, 3179TF, 4045HLV68, 4045HLV70, For Hose Clamp use Item #: 130452, (Item #: 150857)$19.10
Radiator Hose Lower - New lower radiator hose with an inside diameter of 2" on the smaller side and 2.312" on the larger side. This radiator hose fits the John Deere Tractor 4040 (with air conditioning) or 4230 (diesel with air conditioning). For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Item #: 123160, Ref: R53142)$11.80
Radiator Hose Lower - Hose, radiator lower for tractors without air conditioning. For tractor models 4240, 4440. (Item #: 123165, Ref: R61434)$19.60
Radiator Hose, Lower - New lower radiator hose with an inside diameter of 2.5 inches. Used on John Deere 4240 (W/ AC), 4240S, 4350, 4440 (W/ AC). (Item #: 123164, Ref: R61433)$24.10
Radiator Hose, Upper - Hose, radiator upper for tractors:4050 SN# 005511-006509 with 6466DR and TR, 4250 engine to SN# 322745 and up with 6466TR. 4440, 4450 engine to SN# 322745 with 6466TR, 4630. (Item #: 123161, Ref: R53407)$11.00
Thermostat Cover, Used - For John Deere tractor models 4040, 4050, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940, Compatible with John Deere Construction and industrial models 690C, 690CR, 693C, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 793 (D), 892 (DLC), Compatible with John Deere Engine(s) 6359T, 6466A, 6466D, 6466T, 6619A, Replaces John Deere OEM nos R58721, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435046)$33.01
Water Pump - For tractor models 4240, 4350, 4440, 4455, 5720, 5730, 8430, 9940, (4640, 4840, 8440 all IF USED WITH ORIGINAL PULLEY). Water Pump replaces Casting numbers: R61439, RE10969, RE10970, R61437, AR98551, RE11496, RE11498, AR74498, AR84165, R98552. This water pump weighs 40 lbs. Includes gasket. (Item #: 101905, Ref: RE20022)$177.00
Water Pump Gasket - For John Deere tractor models 4040, 4240, 4440, 4455 (Manufactured in Mexico), 4640, 4840, 8440, 8640, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 9940, Replaces John Deere OEM number R61437, (Item #: 154662)$9.60
No Picture
Water Pump Hub - For John Deere tractor models 4240 (6-466 diesel engine with OEM R61439), 4240S (6-466T diesel engine with OEM R61439), 4350 (6-466T diesel engine), 4430 (6-404T diesel engine with OEM R50408), 4440 (6-466T diesel engine with OEM R61439), 4630 (6-404 diesel engine with OEM R50405), 4640 (6-466 diesel engine with OEM R61439), 4840 (6-466 diesel engine with OEM R61439), 8440 (6-466 diesel engine with OEM R61439), Replaces John Deere OEM number R50408, R61439, (Item #: 177027)$49.97
Water Pump Pulley - The measurements on this pulley are 1.506 inches inside diameter, 8.375 inches outside diameter, and 3.27 inches thick. It has two grooves. This pump is used with RE20023 Water Pump on John Deere models: 4240, 4240S, 4350, 4430, 4440, 4455, 4630, 7020, 5200, 5400, 5440, 690B, 693B (Item #: 151073, Ref: R52592)$84.00
Water Pump Pulley, Used - For John Deere tractor models 4240, 4240S, 4350, 4430, 4440, 4455, 4630, 7020, Compatible with John Deere Harvester(s) 5200, 5400, 5440, Compatible with John Deere Construction and industrial models 690B, 693B, Replaces John Deere OEM number R52592, ID: 1.506", OD: 8.372", Thickness: 3.27", Double Groove, 4 Bolts, For a new version of this item use Item #: 151073, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498817)$48.60
No Picture
Water Pump, Remanufactured, RE20022 - For John Deere tractor models 4040, 4240, 4350, 4440, 4455, 4620, 4640 (if hub is taken off and replaced with pulley), 4840 (if hub is taken off and replaced with pulley), 7020, 8430, 8440 (if hub is taken off and replaced with pulley), 8640, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 9940, Replaces John Deere OEM number RE20022, R58713, R61440, RE524413, TY6758, AR74498, AR84165, AR98551, AR98552, Replaces Casting number R61437, R61439, R98552, RE10969, RE10970, RE11496, RE11498, For a New version of this sku use Item #: 101905, (Item #: 210333)$157.01
Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 3300, 3430, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4400, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5103, 5105, 5200, 5203, 5205, 5210, 5303, 5310, 5310N, 5320, 5320N, 5400, 5403, 5410, 5420N, 5440, 5460, 5510, 5510N, 5520, 5520N, 5720, 6100, 6500, 6600, 7020, 7445, 7450, 8430, 8440, 8640 and 9400. (Item #: 164008, Ref: AR101549)$10.10
No Picture
Water Pump, Used - For John Deere tractor models 4040, 4240, 4350, 4440, 4455, 4620, 4640 (if hub is taken off and replaced with pulley), 4840 (if hub is taken off and replaced with pulley), 7020, 8430, 8440 (if hub is taken off and replaced with pulley), 8640, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940, Replaces John Deere OEM number RE20022, R58713, R61440, RE524413, TY6758, AR74498, AR84165, AR98551, AR98552, Replaces Casting nos R61437, R61439, R98552, RE10969, RE10970, RE11496, RE11498, Includes: 4 bolt hub, pump to backplate and backplate to block gaskets, For a new version of this item use Item #: 210333, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435752)$95.01
Decals and Emblems
No Picture
Decal Set - Hood only set for 4440. Printed on Mylar. (Item #: 164913, Ref: R3789)$90.00
Front Grille Emblem - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4440, 4450, 4455, 4630, 8450, 8560, 8570, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9200, 9300, 9400, Replaces John Deere OEM number R82804, AR77663, AR60518, AR79161, R67028, Includes back plate, (Item #: 150057)$44.00
Bearing Cup - For tractor models 4040, 4240, 4440. (Item #: 161913, Ref: TP-JD9041)$13.50
No Picture
Bearing Cup - For tractor models 4040, 4240, 4440. (Item #: 180681, Ref: TP-JD9170)$21.82
Clutch Plate, Used - For John Deere tractor models 4040, 4230 (s/n 016359-later), 4240, 4430 (s/n 022373-later), 4440, 4630, 4640, 4840, Replaces John Deere OEM number R56720, For a new version of this item use Item #: 164486, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434886)$50.01
Front Power Shift Pack, Remanufactured, RE20138 - For John Deere tractor model 4440, Replaces John Deere OEM number RE20138, Carefully Disassembled, Cleaned and Inspected, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200437)$6729.01
Pinion Gear - Used with R59698 Shaft. Gear is 2.755 inches wide and has 31 teeth. For tractor models 4255, 4350, 4440 and front axles on 8440, 8450 and (8630 after SN# 7843). (Item #: 173355, Ref: R59696)$232.00
Pinion Shaft - Used with R59696 Pinion Gear. Shaft is 10.58 inches long, has 14 Teeth and 18 Spline. For tractor models 4255, 4350, 4440 and front axles on 8440, 8450 and (8630 after SN# 7843). (Item #: 173496, Ref: R59698)$392.00
PTO Gear - For John Deere tractor models 2840, 3020, 3030, 3120, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R33339, (Item #: 121744)$193.00
Rear Power Shift Pack, Remanufactured, RE19056 - For John Deere tractor models 4430, 4440, Replaces John Deere OEM number RE19056, Carefully Disassembled Cleaned and Inspected, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200451)$3500.01
No Picture
Ring - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number R43752, (Item #: 150382)$17.80
Ring gear and pinion shaft - For Quad and late Syncro. For JD 4040, 4320, 4240, 4430, 4440, 4450 tractors. (Item #: 166001, Ref: AR94183)$561.00
Shift Collar, Planetary - For tractor models 4010, 4350, (4000, 4020, 4320 all syncro range), (4040, 4230, 4240, 4430 all syncro and quad range), (4440 quad range), (JD600 collar shift). (Item #: 125656, Ref: R26066)$104.00
Shifter Cam, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R50824, R71971, Quad Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497166)$101.01
Shifter Fork, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR46768, Replaces Casting nos R44995, Reverse Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498418)$55.01
Shift Lever Knob - This Red Shifter Knob is 1.600 inches outside diameter and has 3/8 inch - 24 UNF fine threads. Replaces John Deere part numbers R153875, R161382, R50864, R58296 (Item #: 114351)$8.50
Electrical System
Air Conditioning Compressor Adapter - Used on John Deere models 4040, 4230, 4240, 4430, 4440, 4630 (Item #: R228845)$36.50
Alternator - 12 volt, 90 amp. For tractor models (7445 1987-94 with 359 dsl), (5720 1982-86 with 466 dsl), (5730 1986-92 with 466 dsl or 619 dsl), (5820 1982-86 with 619 dsl), (5830 1986-92 with 466 dsl), (583 1986-92 with 619 dsl), (4040 1981-82 with 404 dsl), (4050 1983-88 with 359/466 dsl), (4240 1981-82 with 466 dsl), (4250 1983-88 with 466 dsl), 4350, (4440 1981-82 with 466 Turbo dsl), (4450 1983-90 with 466 dsl), (4640 1981-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (8440 1979-82 with 466 dsl), (8630 1978-80 with 619 dsl), (8640 1979-82 with 619 dsl). Replaces 100211-0290, 100211-0290, AR87205, AR93448, AT103789, SE501363, TY26050, TY6621. (Item #: 110571, Ref: AND0002)$176.00
Alternator - 12 volt, 72 amp. For tractor models (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), 5420, (5440 1977-82 with 404 dsl), (5460 1977-82 531 dsl), (5720 1982-86 with 466 dsl), (5820 1982-86 with 619 dsl), (4020 1971-72 with 360 gas or 404 dsl), (4030 1977-78 with 329 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4230 1977-78 with 404 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4320 1969-73 with 404 dsl), (4430 1977-78 with 404 dsl), (4440 1978-82 with 466 Turbo Dsl), (4450 1983-90 with 466 dsl), (4620 1969-73 with 404 dsl), (4630 1977-78 with 404 dsl), (4640 1978-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (6030 1970-77 with 531 dsl), (7520 1971-75 with 531 dsl), (8630 1975-78 with 619 dsl). replaces 1100490, 1102932, 1100287, 11013128, 1102926, 1105174, SE501382, TY6600, TY6772. Comes with single groove pulley. If you need a double groove, reuse your old one or order R81507 (Item #: 110572, Ref: ADR0133)$122.00
Alternator - 12 volt, 78 amp. For tractor models (4000, 4020 SN# 263481 and up with air), 4030, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (4040 with out cab), (4050, 4250, 4450, 4650, 4850 with roll guard), (4620 SN# 014118 and up), (6030 with air), (7020 SN# 002264 and up), (8430 up to SN# 006278), (8630 up to SN# 008619). Replaces 8134664, 8982775005, JR775005, 10463060, 10463397, 10495429, 10497077, 1100257, 1101244, 1101298, 1100241, 1100246, 1100269, 10497074, 1101308, 1101241, 1101299, 1100237, 1100259, 1100270, 1100287, 1105047, 1105048, 1105049, 1101242, 1101245, 1101279, 1105427, 1105492, 1105495, 1105604, 1105606, 1105634, 1105648, 1105650, 1105673, 1105692, 1105426, 1105496, 1105632, 1105651, 1105425, 1105494, 1105620, 1105628, 1105629, 1105706 (Item #: 109805, Ref: TY6686)$142.00
Battery Box - Left Hand, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Replaces John Deere OEM nos AR73983, RE44146, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498790)$117.01
Battery Box - RH, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Replaces John Deere OEM nos AR73982, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498791)$100.01
Battery Box Step - Left Hand, Used - For John Deere tractor models 2940, 2950, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4630, 4640, 4840, Replaces John Deere OEM number AR85336, Left Hand Side, Has Spring Clip, For a new version of this item use Item #: 103865, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403865)$54.51
Battery Box Step - Right Hand, Used - For John Deere tractor models 2940, 2950, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555 (s/n 010000-earlier), 4630, 4640, 4650, 4755 (s/n 010000-earlier), 4840, 4850, 4955 (s/n 010000-earlier), Replaces John Deere OEM number AR85335, AR65024, AR54259, Right Hand, For a new version of this item use Item #: 103864, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403864)$50.01
Blower Motor - Stay cool by getting your air conditioning up and running. This Blower Motor is - double shaft - 12 volt single speed 2 wire motor with 5/16 inch shafts. Tractors: 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430 4WD, 8630. Replaces 916005, BM20013, RE223623, AR62497 (Item #: 109375, Ref: AR62497)$69.00
Blower Motor - Note, some John Deere applications require 2 R85234 orings to fit in the housing. These o-rings are not available though Yesterday's Tractors. This Blower motor is a double shaft, 12 volt single speed 2 wire motor with 3/8 inch shafts. Tractors: 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 4WD, 8440, 8450, 8630, 8640, 8650, 8850. Combine: 484, 4425, 6620, 6622, 7440, 7445, 7450, 7455, 7720, 7722, 8820, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976. Backhoe: 310C, 315C, 410B, 510B, 510C. Wheel Loader: 544E, 624E. Forage Harvester: 5720, 5730, 5820, 5830. Sprayer: 6100, 6600, 6700. Windrower: 2320, 2420, 3430, 3830. Replaces R82005GV, RE251028, RE25160, AR82005 (Item #: 110507, Ref: AR82005)$81.00
Blower Wheel - Blower wheel, counterclockwise - 4-1/4 inch diameter wheel, 3/8 inch shaft. Offset - 2 1/4 inches and 3 1/2 inches. Replaces BW212, 539018R1, 7025877, D5NN18459A, 917540, R81111, AMR81111, R65832. For the following applications: 2040, 4050, 4055, 4250, 4255, 4450, 4455, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8440, 8450, 8640, 8650, 8850. Early 2750, 2950. Late 4030, 4040, 4230, 4430, 4440, 4630, 8430, 8630. With SN#430000-500462: 1640, 2040, 2740S, 2140, 3040, 3140. With Cab SN# before 167111: 4640, 4840. (Item #: 163264, Ref: 539018R2)$52.00
Circuit Breaker, 10 Amp - For John Deere tractor models 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8430 (Model Year 1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Drill (s) 770, 780, 785, Replaces John Deere OEM number AR70052, Volts: 12, Amps: 10, (Item #: 167962)$7.90
Compressor, 12 volt - Remanufactured, with clutch, 1 groove 5.58" pulley. For tractor models (4400, 7700 1975 and up), (4420 SN# up to 610100), 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 6600, (6620, 7720, 8820 up to SN# 600000), 7020, 7520, 8430, 8440, 8630, 8640. *** NIS *** (Item #: 109093, Ref: AR77343)$390.00
No Picture
Connector Housing - For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number T28583, (Item #: 170517)$1.90
Pressure Switch Wiring Harness - For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number RE203464, (Item #: 125653)$18.98
Pulley - This is a two groove pulley used on multiple John Deere models. For 13mm (0.50 Inch) Belts. 81Mm (3.20 Inch) Outside Diameter, 17mm (0.669 Inch) Inside Diameter. Used on Alternators: A-890, 13143, 021000-7420, 100211-0080, 100211-0081, 100211-0290, 100211-0291, 100211-0292, 100211-0790, 290-402. It replaces John Deere Part Numbers R81507, R52161. Replaces Delco part numbers 7940-1107, 1149-P, 8126450, 115-030, 191002, 1B-5011, 379401107, 22025011 (Item #: 117432, Ref: R81507)$15.50
Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. Replaces R52159 (Item #: 172973, Ref: R52159)$17.40
Push Button Starter/Horn Switch, Used - For John Deere tractor models 530, 630, 730, 830, 2510, 2520, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4630, 4640, 4650, 4760, 4840, 4850, 4960, 5010, 5020, 6030, 7520, 8020, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700, Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number AR21823, For a new version of this item use Item #: 121158, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421158)$5.01
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models 1085, (2056, 2058, 2064, 2066 1993 and up), (6600, 6602, 7700 79-82 with 404 dsl), (6620 1979-88 with 466 dsl), (6622 1980-85 with 466 dsl), (7720 79-89 with 466 dsl), (8820 1980-92 with 466 dsl), (9500, 9600 1989-93 with 466 dsl), (9940 1983-86 with 466 dsl), (9950 1987-90 with 466 dsl), (9960 1987-93 with 466 dsl), (9965 from 1993 and up), 544, (5200 1974-77 with 404 dsl), 5420, (5440 1977-82 with 404 dsl), (5720 1982-86 with 466 dsl), (5730, 5830 1986-92 with 466 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4055 1989-92 with 466 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4255 1989-92 with 466 dsl), 4350, (4440 1978-82 with 466 dsl), (4450 1983-90 with 466 dsl), (4455 1989-92 with 466 dsl and all made in Mexico), (4555 1989-92 with 466 dsl), (4560 1992-94 with 466 dsl), (4640 1978-82 with 466 dsl). Replaces 028000-3292, 228000-4601, 128000-5972, 028000-3290, 128000-0770. (Item #: 107885, Ref: SND0238)$290.00
Starter - This is a 12 volt starter, clockwise rotation, 10 tooth drive, DD Delco 35MT Type. Rotatable DE housing. Note, check clearance on some JD models, may have interference issues on starter motor height when models have drop type manifold is used. For models 3010, 3020, 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320 Compact Tractor, 4430, 4440, 444C Indust/Const, 444D Indust/Const, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500A Indust/Const, 500C Indust/Const, 5400, 544C Indust/Const, 544E Indust/Const, 544G Indust/Const, 570 Grader, 570A Grader, 5720 Forage Harvester, 5820 Forage Harvester, 624E Indust/Const, 643D Feller Buncher, 644C Indust/Const, 644D Indust/Const, 646C Compactor, 690 Excavator, 690A Excavator, 690B Excavator, 693B Feller Buncher, 7020, 740A Skidder, 8430, 8440, 8450, 8640, 8650. Also replaces SE501446. (Item #: 112400, Ref: SE501444)$265.00
Starter - For 4040, 4240, 4440, 8450. Starter. Also replaces S-AL67897, S-RE41748, S-AL41247. (Item #: 107885, Ref: S-RE13722)$290.00
No Picture
Starter - Denso Style DD (16635), Remanufactured, Denso, 028000-3290, AR41627 - For John Deere tractor models 4030, 4040, 4050, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5420, 5720, 6030, 6600, 6620, 7020, 7700, 8430, 8440, 8450, Compatible with John Deere Combine (s) 1085, 6602, 6622, 7720, 7722, 8820, 9500, Compatible with John Deere Harvester (s) 5440, 5720, 5730, 5830, 9940, 9950, Compatible with John Deere Construction and industrial models 444, 444C, 444D, 500C, 510, 544, 544A, 544B, 544D, 544E, 544G, 570, 570A, 624E, 624G, 643, 643D, 644C, 644D, 644E, 644G, 690, 690A, 690B, 693B, 740, 740A, 743, 743A, Compatible with John Deere Engine (s) 6059, 6068, 6076, 6466A, 6466D, 6466T, Replaces John Deere OEM number AR41627, AR55639, AR77254, RE13722, RE41875, SE501414, TY6617, TY6713, TY25960, Replaces Denso manufacturer number 028000-3290, 028000-3291, 028000-3292, 128000-0770, 128000-0771, 128000-0772, 9702800-329, 9712809-077, Replaces manufacturer number 16635, Denso Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, Mounting Type: Flange, Mounting Holes: 3, For diesel applications, For a New version of this sku use Item #: 107885, (Item #: 203193)$412.00
Starter - Denso Style DD (16635), Used - For John Deere tractor models 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 7020, 8430, 8440, 8450, 8560, 8640, 8650, Compatible with John Deere Combine(s) 985, 1085, 1085 (s/n 041200-earlier), 1177, 1188, 1188H4, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9500 SH, 9600, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 444, 444C, 444CH, 444D, 500A (s/n 123114-152141), 500B, 500C, 510, 544D, 644A, 644C, 644D, 646, 646B, 646C, 690, 690A, 690B, 693B, 740, 740A, 743, 743A, Compatible with John Deere Engine(s) 6076, 6329D, 6359A, 6359D, 6359T, 6414D, 6414T, 6466A, 6466A (s/n 067685-later), 6466D, 6466D (s/n 067685-later), 6466T, 6466T (s/n 067685-later), Replaces John Deere OEM number AR41627, AR55639, AR77254, RE13722, RE41875, SE501414, TY6617, TY6713, TY25960, Replaces Denso Mfg nos 028000-3290, 028000-3291, 028000-3292, 128000-0770, 128000-0771, 128000-0772, 9702800-329, 9712809-077, Replaces Mfg nos 16635, Denso Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, For a new version of this item use Item #: 203193, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403193)$154.01
No Picture
Starter - Denso Style DD (18177) - For John Deere tractor models 4030, 4040, 4050, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5420, 5720, 6030, 6600, 6620, 7020, 7700, 8430, 8440, 8450, Compatible with John Deere Combine (s) 1085, 6602, 6622, 7720, 7722, 8820, 9500, Compatible with John Deere Harvester (s) 5440, 5720, 5730, 5830, 9940, 9950, Compatible with John Deere Construction and industrial models 444, 444C, 444D, 500C, 510, 544, 544A, 544B, 544D, 544E, 544G, 570, 570A, 624E, 624G, 643, 643D, 644C, 644D, 644E, 644G, 690, 690A, 690B, 693B, 740, 740A, 743, 743A, Compatible with John Deere Engine (s) 6059, 6068, 6076, 6466A, 6466D, 6466T, Replaces John Deere OEM number RE41875, SE501420, TY25960, TY25966, TY6781, SE501414, Replaces manufacturer number 18177, S-8033, Replaces Denso manufacturer number 128000-591, 128000-5910, 128000-5911, 128000-5912, 128000-5913, 128000-7570, 128000-7571, 128000-7572, 128000-7573, 9712809-591, 9712809-757, Replaces Lucas manufacturer number S9947, Denso style direct drive, Voltage: 12, Rotation: clockwise, Teeth:11, (Item #: 189501)$364.00
Starter Switch, Used - For John Deere tractor models 820, 830, 920, 930, 940, 955, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester(s) 9900, Compatible with John Deere Construction and industrial models 300B, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR58126, For a new version of this item use Item #: 156037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456037)$9.01
Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Item #: 179443, Ref: AR48725)$31.00
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994)$12.00
Wire Harness - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4240S, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6020, 7020, 7520 (4WD), 8430 (4WD), 8440, 8630, 8640, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5820, (Item #: 159006)$8.60
Engine Bearings
Axle Oil Cup - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 7700, 8430, 8440, 8450, 8630, 8640, 8650 (Fits Combines 4400), Compatible with John Deere Combine (s) 4400, 4420, 6600, 6602, 6620, 6622, 7701, 7720, 7721, 8820, 9501, Compatible with John Deere Harvester (s) 5200, 5400, 5720, 5730, 5820, 5830, Replaces John Deere OEM number R59074, (Item #: 109604)$18.98
Axle Seal - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Combine (s) 6620, 6622, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number RE31702, (Item #: 109603)$25.98
Camshaft Bearing - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (LP s/n 201000-earlier), 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8760 (s/n 500000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644, 644A, 644B, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 700, 700A, 740, 740A, 743, 743A, 762, 762A, 762B, 790, 790D, 792, 850, 850B, 855, 860B, 862, 890, 890A, Compatible with John Deere Engine (s) 201, 227, 254 (diesel), 270 (diesel), 362, Replaces John Deere OEM number R46903, Camshaft use Item #: 108146, (Item #: 106861)$6.10
Connecting Rod Bearing - .030 - Used on John Deere 6076T, 466 CID 6 cylinder diesel Engine, this bearing replaces John Deere number AR73281. This bearing is .030 oversize. (Item #: 106770)$9.98
Differential Bearing Housing, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 8440, 8450, Replaces John Deere OEM nos R46360, R72049, QUAD-RANGE AND SYNCRO-RANGE, Verify Transmission Type, Verify serial Numbers, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496969)$40.01
Differential Bearing Housing, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 8440, 8450, Replaces John Deere OEM nos R73266, Marked R73266, Right Hand, Verify Transmission Type, Verify serial Numbers, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497820)$85.01
Differential Bearing Housing, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 8440, 8450, 8640, 8650, Replaces John Deere OEM nos R46448, Quad and Syncro Range, Powershift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498726)$45.01
Differential Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R66715, Beveled Teeth: 24, External Teeth: 47, Internal Splines: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498723)$150.01
Differential Side Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4400, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R54182, R63477, Use Thrust Washer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496839)$75.01
Differential Side Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R42446, Replaces Casting nos R26034, Does Not Use Thrust Washer, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498725)$70.01
No Picture
Main Bearing, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155963, Ref: AR74816)$6.98
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106835, Ref: MBK1437)$108.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106836, Ref: MBK1437-010)$112.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106837, Ref: MBK1437-020)$112.00
No Picture
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Item #: 106838, Ref: MBK1437-030)$112.00
No Picture
Main Bearing Set - Available in STD, .010, .020, .030 For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine. Specify size in Comments box when ordering. (Item #: R-AR74814S6)$167.11
No Picture
Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Item #: 166499, Ref: AR74814)$13.40
No Picture
Pressure Plate Springs - For John Deere tractor models 4040 (9 required), 4230 (s/n 16359-later, 9 required), 4240 (12 required), 4430 (s/n 22373-later, 12 required), 4440 (15 required), Replaces John Deere OEM number R56722, Package of 15, Used for powershift pressure plates, (Item #: 177019)$174.00
PTO Bearing Housing Cover Gasket - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 570, 570A, 600, 670, 670A, 672A, Replaces John Deere OEM number R33337, (Item #: 161849)$6.50
PTO Seal - For John Deere tractor models 830 (3 Cyl), 930, 1020, 1120, 1130, 1830, 2010, 2020, 2030, 2120, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020 (s/n 123000-later), 3030, 3120, 3130, 4000, 4020 (s/n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number RE13181, AT16431, AT167936, CR28669, (Item #: 121741)$9.70
Rear Transmission Cover Gasket - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, Compatible with John Deere Construction and industrial models 670B, 672B, Replaces John Deere OEM number R92411, R40947, R80965, (Item #: 169740)$14.10
Rod Bearing, STD - Single Bearing. For tractor models (4055, 4255, 4455, 4555, 4560, 7700, 770BH, 772B, 772BH, 7800, 792D, 792LC, 8100, 8300, 850C, 892E, 892LC, 9500, 9600, 9960, 9965 with 6.076H above SN# 500000, 6.076T, 6.076A 6 cyl engine), (4250, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and with 6.466A SN# 317859 and up), 5720, (4440, 4640, 6620, 6622, 7720 with 6.466T all and 6.466A up to SN# 233592 and above 317859), (4755, 4760, 644E, 644ER, 740E, 740G, 748E, 748G with 6.076H, 6.076T or 6.076H eng.), (4840, 5730, 644C, 690C, 762A, 762B, 770A, 770B, 790D, 8430, 8440 with 6.466T up to SN# 253372 and 6.466A up to SN# 317858). (Item #: 106767, Ref: AR73277)$13.60
No Picture
Thrust Bearing Set, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155964, Ref: AR77750)$13.98
Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). Thrust washers available as part number AR77747 (Item #: 166224, Ref: AR77748)$15.10
Transmission Case Cover Gasket - For John Deere tractor models 4000, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R33425, (Item #: 161858)$7.98
Engine Gaskets
No Picture
Complete Gasket Set without Seals - For tractor models (4250, 4450, 4650, 5460, 6602, 762B, 770A, 790D with 6.466T SN# above 253373 and 6.466A above SN# 317859 6 cyl.), (4440, 4640, 6620, 6622 with 6.466T and (6.466A SN# up to 233592 and above SN# 317859), (4840, 5730, 644C, 690C, 7720, 8430, 8440, 8450, 8820 with 6.466T SN# up to 253372 and 6.466A up to SN# 317858), (4850 6.466A SN# 233593-317858), (5720, 9940 with 6.466T or 6.466A), (644D, 646A with 6.466D 6 cyl), (740A with 6.466D all with 6.466A SN# 233593-317858), (762A with 6.466D all with 6.466T SN# above 253373 with 6.466A SN# above 233593), (850B, 892D, 9950 with 6.466T above SN# 253373 and 6.466A SN# above 233593) (Item #: 106945, Ref: AR98845)$191.00
No Picture
Crankshaft Seal, Front - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Item #: 106851, Ref: AR49025)$15.20
Crankshaft Seal, Rear - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Replaces RE520036, RE17352, RE22764, AR63095, RE14953, RE504363, RE530121 (Item #: 106856, Ref: RE22764)$32.00
Full Gasket Set - For John Deere tractor models 4040, 4230, 4240, 4440, Compatible with John Deere Combine (s) 6600, 7700, Compatible with John Deere Engine (s) 404 (Diesel), Replaces John Deere OEM number AR63938, RE524107, Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included), (Item #: 106941)$130.00
Full Gasket Set - For John Deere tractor models 4050 (s/n 6592-earlier), 4240, 4250, 4440, 4450, Compatible with John Deere Combine (s) 6620 (s/n 335846 - later), Replaces John Deere OEM number RG27872, AR100638, AR87750, RE524395, Engine: D466 Diesel, Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included), (Item #: 106942)$249.00
No Picture
Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine (Item #: 106945, Ref: R-AR98845)$191.00
No Picture
Gasket Set - For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Item #: FS3898)$476.02
Half Split Rear Gasket - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4640, 4650, 4840, 4850, 8440, 8560, 8640, 8760, 8960, Compatible with John Deere Engine (s) 6076, 6076A, 6076T, 6466A, 6466D, Replaces John Deere OEM number R90249, (Item #: 169739)$8.60
Valve Cover Gasket - For John Deere tractor models 330, 770, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7710, 7800, 7810, 8100, 8200, 8210, 8300, 8400, 8410, 8440, 8450, 8560, 8570, 9100, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9510, 9550, 9600, 9610, 9650, 9660, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 6610, 6650, 7200, 9940, 9950, 9960, 9965, 9970, 9976, Compatible with John Deere Construction and industrial models 370, 644A, 644C, 644D, 644E, 644G, 644H, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 740, 740E, 743, 743A, 748E, 748G, 762A, 762B, 770A, 770B, 770C, 772A, 772B, 772CH, 790, 790D, 792, 850B, 850C, 892ELC, Compatible with John Deere Engine (s) 6381, 6466D, Replaces John Deere OEM number R49866, R26356, R32593, Additional Handling and Oversize Fees Apply To This Item, (Item #: 117939)$9.90
Engine Rebuild Kits
No Picture
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Item #: 189552, Ref: BIFD4460)$846.00
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket set. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Item #: BIFD6466)$1237.67
No Picture
Basic Overhaul Kit - BASIC Overhaul Kit. 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Basic Engine Kit, less bearings. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Item #: 130714, Ref: BEKD4460-LCB)$1529.01
No Picture
Basic Overhaul Kit - BASIC Overhaul Kit 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Basic Engine Kit, less bearings. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Item #: 130711, Ref: BEKD6466-LCB)$1489.01
Cylinder Kit - For John Deere tractor models 4040, 4240, 4440, 4640, 4840, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6620, 6622, 7720, 8820, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, Compatible with John Deere Construction and industrial models 644C, 646C, 740A, 743, 743A, 762A, Compatible with John Deere Engine (s) 6466A, 6466T, Replaces John Deere OEM number RE60288, (Item #: 167371)$127.00
Cylinder Kit - For John Deere tractor models 4040, 4230, 4240, 4440, Compatible with John Deere Combine (s) 6600, 6602, 7700, Replaces John Deere OEM number RE23160, (Item #: 167391)$118.00
Cylinder Kit - For John Deere tractor models 4040, 4050, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, Compatible with John Deere Combine (s) 6620, 6622, 7720, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 653E, 690C, 690CR, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, Replaces John Deere OEM number RE60282, (Item #: 167500)$158.00
Cylinder Kit - For John Deere tractor models 4040, 4240, 4440, Compatible with John Deere Combine (s) 6620, 6622, 7720, Compatible with John Deere Engine (s) 6466D, Replaces John Deere OEM number RE60290, (Item #: 167501)$100.98
No Picture
Engine Major Overhaul Kit - For (4250, 4440, 4450, 4640, 4650, 5460, 5720, 5730, 6602, 6620, 6622, 7720, 9940, 9950, with 6.466T SN# 253373>, and 6.466A SN# 317859>, 6 cylinder), (644C, 690C, 762A, 762B, 770A, 770B, 790D, 892D, 850B, with 6.466T SN# 253373>, and 6.466A SN# 317859>, 6.466A 6 cylinder), all with 400 Series, SBSN 70601>, Conn Rod: R71071, 4.56" bore, 1.85" Pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Item #: 130711, Ref: RG18847)$1489.01
No Picture
Engine Rebuild Kit - Less Bearings - Rod R57303 - High Compression, 6466A, 6466T - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450 (early), Compatible with John Deere Combine (s) 6602 (s/n 163500-later), 6620 (early), 6622 (early), 7720 (early), 8820 (early), Compatible with John Deere Harvester (s) 5720 (early), 9940 (early), Compatible with John Deere Construction and industrial models 644A (early), 646C (early), 740A (early), 743, 743A, 762A (early), Compatible with John Deere Engine (s) 6466A (diesel), 6466T (diesel), Bore: 4.5625", Connecting rod marked R57303, R67320, Tapered pin bushing, 1.875" piston pin, Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bolts and Bushings, and Gasket set with Crank Seals, High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel / air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106838, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130636)$1889.01
Piston, Used - For John Deere tractor models 4040, 4240, 4440, 4640, 4840, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6602, 6620, 7720, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940, Replaces John Deere OEM nos AR93629, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498517)$31.01
Engine Parts
Brake Accumulator, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8430, 8440, 8450 (s/n 002369-later), 8630, 8640, 8650 (s/n 003438-later), 8850, Compatible with John Deere Harvester(s) 9940, Compatible with John Deere Construction and industrial models 340D, 440C, 440D, 448D, 500C, 510, 640D, 648D, Replaces John Deere OEM nos RE11956, AR67778, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498786)$400.01
Camshaft - For John Deere tractor models 4040, 4050, 4230, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6600, 6620, 7700, Compatible with John Deere Engine (s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R71530, For a Remanufactured version of this sku use Item #: 201080, (Item #: 165590)$328.00
Camshaft and Lifter Kit - For John Deere tractor models 4000, 4020 (s/n 201000-later), 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Engine (s) 6404A (s/n 335845-later), 6404D (diesel, s/n 215000-later), 6404T (s/n 335845-later), 6466A (s/n 67684-later), 6466D (non-turbo), 6466T (s/n 253372-later), Replaces John Deere OEM number AR100385, Replaces Block Casting number R44310, R45980, R47020, R47110, R49470, R49650, R59850, R72128, (Item #: 158278)$357.00
Camshaft Gear, Used - For John Deere tractor models 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (1974-1981), 8440, 8450, 8650, Compatible with John Deere Combine(s) 6600, 6620, 6622, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 653E, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, Replaces John Deere OEM nos AR87700, Replaces John Deere Casting nos R50350, R67381, R67382, Teeth: 46 and 60, Inside Diameter: 1.25", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498770)$70.01
Camshaft, Remanufactured, AR100384 - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM number AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting number R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Engine (s): 6404, 6466 diesel, Cylinder: 6, Casting No. R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, (Item #: 204080)$216.01
Camshaft with Oil Pump Gear, Used - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM number AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting nos R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Engine(s): 6404, 6466 diesel, Cylinder: 6, Casting No. R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Used on engines with cam driven oil pump, For a new version of this item use Item #: 201080, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430220)$182.01
Camshaft without Oil Pump Drive Gear, Used - For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Replaces John Deere OEM nos AR100384, AR71709, AR74144, AR79610, Replaces John Deere Casting nos R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316, Used on engines with crank driven oil pump, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430938)$163.01
Connecting Rod - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6602, 6620, 6622, 7720, 8820 (engine s/n 235960-earlier), Compatible with John Deere Harvester (s) 5720 (engine s/n 239486-earlier), 5730 (engine s/n 239486-earlier), 9940 (engine s/n 239486-earlier), Compatible with John Deere Construction and industrial models 644C (engine s/n 235960-earlier), 646C (engine s/n 235960-earlier), 693C (engine s/n 239486-earlier), 740A (engine s/n 233699-earlier), 743 (engine s/n 233699-earlier), 743A (engine s/n 233699-earlier), 762A (engine s/n 239486-earlier), Compatible with John Deere Engine (s) 6466A (s/n 67685-253372), 6466D (s/n 67685-253372), 6466T (s/n 67685-253372), Replaces John Deere OEM number AR87638, AR68790, SE500079, Replaces Casting number R67320, R57303, For a Remanufactured version of this sku use Item #: 210058, (Item #: 161204)$92.98
No Picture
Connecting Rod - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4260, 4440, 4450, 4455, 4455 (Mexico), 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine (s) CTS, CTS (s/n: 670101-674000, Europe), 6620 (s/n: 670101-674000, Europe), 6622 (s/n: 670101-674000, Europe), 7720 (s/n: 670101-674000, Europe), 8820 (s/n: 670101-674000, Europe), 9500 (Maximizer), 9500 SH (s/n: 670101-674000, Europe), 9600 (Maximizer), Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970, Compatible with John Deere Engine (s) 6076 (s/n: 499999-earlier), 6076AF, 6076AFN-30, 6076HF, 6466A (s/n: 067685-later), 6466D (s/n: 067685-later), 6466T (s/n: 067685-later), Replaces John Deere OEM number AR93341, SE500498, R71074, Replaces John Deere Casting number R71074, Fits John Deere Engine (s) 6067FT, 6076AFM (s/n: 499999-earlier), 6076AFM30 (s/n: 50000-later), (Item #: 180755)$126.00
Connecting Rod Bolt - It is important to change these any time the tension is released. This connecting rod bolt is only for connecting rods with casting number: R26047, R41423, R52285, R57303, R58880, R58882, R66922, R66923, R67320, or R71074. Check casting number before ordering. 2.484 inch long. Replaces R66452, R53290, R26325 (Item #: 113908, Ref: R66452)$3.60
Connecting Rod, Remanufactured, AR87638, R67320 - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6602, 6620, 6622, 7720, 8820 (engine s/n 235960-earlier), Compatible with John Deere Harvester (s) 5720 (engine s/n 239486-earlier), 5730 (engine s/n 239486-earlier), 9940 (engine s/n 239486-earlier), Compatible with John Deere Construction and industrial models 644C (engine s/n 235960-earlier), 646C (engine s/n 235960-earlier), 693C (engine s/n 239486-earlier), 740A (engine s/n 233699-earlier), 743 (engine s/n 233699-earlier), 743A (engine s/n 233699-earlier), 762A (engine s/n 239486-earlier), Compatible with John Deere Engine (s) 6466A (s/n 67685-253372), 6466D (s/n 67685-253372), 6466T (s/n 67685-253372), Replaces John Deere OEM number AR87638, AR68790, SE500079, Replaces Casting number R67320, R57303, For a New version of this sku use Item #: 161204, (Item #: 210058)$89.01
Connecting Rod, Remanufactured, AR93341 - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine (s) CTS, 6620, 6622, 7720, 8820, 9500, 9500 SH, 9600, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970, Replaces John Deere OEM number AR93341, Replaces Casting number R71074, (Item #: 210164)$162.01
Connecting Rod, Remanufactured, R41423, AR70912, AR86980 - For John Deere tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 7020, Compatible with John Deere Combine (s) 6600, 6602, 6620, 7700, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, Replaces John Deere OEM number AR86980, AR70912, Replaces Casting number R41423, R66922, R58882, (Item #: 210066)$108.01
Connecting Rod, Used - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine(s) CTS, 6620, 6622, 7720, 8820, 9500, 9600, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970, Replaces John Deere OEM number AR93341, Replaces Casting nos R71074, Approximate weight: 3525 grams (pin bushing included in rod weight), Two dead bolt rod holes, For a Remanufactured version of this part use Item #: 498751, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437020)$50.01
Connecting Rod, Used - For John Deere tractor models 4040, 4240, 4440, 4640, 4840, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6602, 7720, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, Replaces John Deere OEM nos R57303, .3368 Grams, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498826)$45.01
Connecting Rod, Used - For John Deere tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 7020, Compatible with John Deere Combine(s) 6600, 6602, 6620, 7700, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, Compatible with John Deere Construction and industrial models 644A, 690, 690A, 690B, 740, Replaces John Deere OEM nos AR70912, AR86980, Replaces Casting nos R58882, R66922, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498838)$45.01
Connecting Rod, Used - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450, Compatible with John Deere Combine(s) 6602, 6620, 6622, 7720, 8820 (s/n 235960-earlier), Compatible with John Deere Harvester(s) 5720 (s/n 239486-earlier), 5730 (s/n 239486-earlier), 9940 (s/n 239486-earlier), Compatible with John Deere Construction and industrial models 644C (s/n 235960-earlier), 646C (s/n 235960-earlier), 693C (s/n 239486-earlier), 740A (s/n 233699-earlier), 743 (s/n 233699-earlier), 743A (s/n 233699-earlier), 762A (s/n 239486-earlier), Compatible with John Deere Engine(s) 6466A (s/n 67685-253372), 6466D (s/n 67685-253372), 6466T (s/n 67685-253372), Replaces John Deere OEM number AR87638, AR68790, SE500079, Replaces Casting nos R67320, R57303, .3352 Grams, For a new version of this item use Item #: 210058, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498822)$35.01
Connecting Rod, Used - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine(s) CTS, 6620, 6622, 7720, 8820, 9500, 9600, Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970, Replaces John Deere OEM number AR93341, Replaces Casting nos R71074, Approximate weight: 3315 grams (pin bushing included in rod weight), One dead bolt rod bolt hole and one drilled through rod bolt hole, For Heavier Connecting Rod use Item #: 437020, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498751)$50.01
Connecting Rod, Used - For John Deere tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 7020, Compatible with John Deere Combine(s) 6600, 6602, 6620, 7700, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, Replaces John Deere OEM number AR86980, AR70912, Replaces Casting nos R41423, R58882, R66922, For a Remanufactured version of this part use Item #: 210066, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498834)$45.01
Countershaft Gear, Used - For John Deere tractor models 4040, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos R46115, 6th and 8th Speed, Teeth: 36, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433691)$184.01
Countershaft Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R50338, Quad Range, D Range, Teeth: 34, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497165)$103.01
Countershaft, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R67221, Replaces Casting nos R50336, Quad Range and Syncro RangeTransmission, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499619)$540.01
Crankshaft Dampener Pulley - For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Manufactured in Mexico), Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, Compatible with John Deere Construction and industrial models 690B, Replaces John Deere OEM number AR57241, OD: 8.345", ID: 1.876", Hydraulic pump drive couplers (2) use Item #: 122100, (Item #: 151072)$163.00
Crankshaft Dampener, Used - For John Deere tractor models 4230, 4240, 4240S, 4320, 4350, 4430, 4440, 4455, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, Compatible with John Deere Construction and industrial models 690B, 693B, Replaces John Deere OEM nos AR57241, Grooves: 3, Width: 2-1/2", Diameter: 3/8", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498740)$95.01
Crankshaft Rear Seal Installer - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6620, 7020, 7700, 7720, 8430, 8440, 8450, Replaces John Deere OEM number R830476, (Item #: 180138)$245.00
No Picture
Crankshaft, Remanufactured, R56979R - For John Deere tractor models 4040 (s/n 584114-earlier), 4240 (s/n 160279-earlier), 4430, 4440 (s/n 160129-earlier), 4520, 4630, 4640, 4840, 7020, 8430 (s/n 231857-earlier), 8440 (s/n 161132-earlier), Replaces Casting number R56979R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished, For a New version of this sku use Item #: 102106, (Item #: 200386)$1100.01
No Picture
Crankshaft, Remanufactured, R78102 - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, Compatible with John Deere Combine (s) 6600, 6602, 6620, 7700, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, Replaces John Deere Casting number R78102, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 209959)$930.01
Crankshaft, Remanufactured, RE53422 - For John Deere tractor models 4040 (s/n 584137-later), 4240 (s/n 160130-later), 4250, 4440 (s/n 160130-later), 4450, 4555, 4650, 4850, 8430 (s/n 161133-later), 8440 (s/n 161133-later), 8450 (s/n 161133-later), Compatible with John Deere Harvester (s) 5720 (s/n 161133-359495), 5730 (s/n 161133-359495), Compatible with John Deere Engine (s) 6466D, Replaces Casting number RE53422, R63451, RE53203, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 127288, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 200387)$980.01
Crankshaft, Remanufactured, RE53422, RE53200, RE53203 - For John Deere tractor models 4440, 4450, 4850, 4955, 4960, 8450, Replaces John Deere OEM number RE53422, Replaces John Deere Casting number RE53200, RE53203, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 204087)$1100.01
No Picture
Crankshaft with bearings, Remanufactured, RE53422 - For John Deere tractor models 4040 (s/n 584137-later), 4240 (s/n 160130-later), 4250, 4440 (s/n 160130-later), 4450, 4555, 4650, 4850, 8430 (s/n 161133-later), 8440 (s/n 161133-later), 8450 (s/n 161133-later), Compatible with John Deere Harvester (s) 5720 (s/n 161133-359495), 5730 (s/n 161133-359495), Compatible with John Deere Engine (s) 6466D, Replaces Casting number RE53422, R63451, RE53203, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 127288, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 210332)$1325.01
No Picture
Crankshaft, with Timing Gear - Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed. For tractor models (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Call for shipping charges - Weight 149 lbs. (Item #: 127288, Ref: RE53422)$1539.01
No Picture
Cylinder Block Kit - For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number AR73212, (Item #: 165066)$1499.01
No Picture
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Item #: VOKD466)$349.65
No Picture
Cylinder Head, Remanufactured, AR103505 - For John Deere tractor models 4050, 4240S, 4250, 4350, 4430 (s/n 445948-later), 4440, 4450, 4630 (s/n 579850-later), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine (s) 985, 1085, 1177, 1188, 1188H4, 6600, 6602 (s/n 445570-later), 6620, 6622, 7700 (s/n 445570-later), 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B (s/n 579850-later), 693C, 740 (s/n 445948-later), 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B (s/n 499999-earlier), 772A, 772AH, 772B (s/n 499999-earlier), 790, 790D, 792, 793, 850B, 892, Replaces John Deere OEM number AR103505, SE500327, Replaces John Deere Casting number R61521, Engine 404, 466, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200338)$1975.01
Cylinder Head, Remanufactured, AR103505 - For John Deere tractor models 4050, 4240S, 4250, 4350, 4430 (s/n 445948-later), 4440, 4450, 4630 (s/n 579850-later), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine (s) 985, 1085, 1177, 1188, 1188H4, 6600, 6602 (s/n 445570-later), 6620, 6622, 7700 (s/n 445570-later), 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B (s/n 579850-later), 693C, 740 (s/n 445948-later), 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B (s/n 499999-earlier), 772A, 772AH, 772B (s/n 499999-earlier), 790, 790D, 792, 793, 850B, 892, Replaces John Deere OEM number AR103505, Replaces John Deere Casting number R81615, R86696, R86699, R76384, Engines 404, 466, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205507)$1990.01
No Picture
Cylinder Head, Remanufactured, R45190 - For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4440, 4630 (Gas), Replaces John Deere Casting number R45190, Engines 341, 362, Cylinders: 6, Casting No. R45190 (w/ block no. R40940 R49550), Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200328)$790.01
No Picture
Cylinder Head, Used - For John Deere tractor models 4050, 4240S, 4250, 4350, 4430 (s/n 445948-later), 4440, 4450, 4630 (s/n 579850-later), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine(s) 985, 1085, 1177, 1188, 1188H4, 6600, 6602 (s/n 445570-later), 6620, 6622, 7700 (s/n 445570-later), 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B (s/n 579850-later), 693C, 740 (s/n 445948-later), 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B (s/n 499999-earlier), 772A, 772AH, 772B (s/n 499999-earlier), 790, 790D, 792, 793, 850B, 892, Replaces John Deere OEM number AR103505, Replaces John Deere Casting nos R59876, R66434, R67906, R76315, R58673, Engine(s): 404, 466, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205508, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405508)$1125.01
No Picture
Cylinder Head with Valses, Remanufactured, R75641 - For John Deere tractor models 4040, 4050, 4240, 4250, 4440, 4450, Compatible with John Deere Combine (s) 6620, Replaces John Deere Casting number R75641, Casting No. R75641, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205311)$2525.01
No Picture
Cylinder Head with Valves, Remanufactured, R58673 - For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 9940, Replaces John Deere Casting number R58673, R59876, R66434, R67906, R76315, Engines 404, 466, Cylinders: 6, Casting No. R58673, R59876, R67906, R66434, R76315, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 203774)$2350.01
Cylinder Head with Valves, Remanufactured, R61521 - For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, 9940, Replaces John Deere Casting number R61521, Engines 404, 466, Cylinders: 6, Casting No. R61521, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205673)$2956.01
Cylinder Head with Valves, Remanufactured, R86699 - For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6602, 7700, 8820, Replaces John Deere Casting number R86699, R76384, R81615, R86696, Engine (s): 404, 466, Cylinders: 6, Casting Number (s): R76384, R81615, R86696, R86699, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 203775)$2800.01
No Picture
Cylinder Head with Valves, Used - For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450, Compatible with John Deere Combine(s) 6600, 6602, 6622, 7700, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, Replaces John Deere Casting number R61521, Engine(s): 404, 466, Cylinders: 6, Casting Number(s): R61521, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205673, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405673)$1700.01
No Picture
Drum, High Range - For John Deere tractor models 2510, 2520, 3020 (U, s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4455 (Mexico), Replaces John Deere OEM number R63072, (Item #: 165807)$189.00
Exhaust Valve - For John Deere tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4850, 7020, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6602, 6620, 6622, 7720, 7722, 8820, Compatible with John Deere Harvester (s) 5200, 5440, 5720, 9940, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 844, 850B, Replaces John Deere OEM number R50357, 1.710" Head Diameter, 6.208" Length, 30 degree, (Item #: 128677)$18.20
No Picture
Exhaust Valve Seat - For John Deere tractor models 600, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4250, 4320, 4440, 4450, 4520, 4620, Compatible with John Deere Combine (s) 6600, 6620, 6622, 7700, 7720, Compatible with John Deere Harvester (s) 5200, 5400, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 644A, 646, 646B, 690, 690A, Replaces John Deere OEM number R43681, (Item #: 167424)$9.20
Flywheel with Ring Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, Compatible with John Deere Engine(s) 6404A, 6404T, Replaces John Deere OEM nos AR76095, Replaces John Deere Casting nos R61951, All with powershift transmission, Bolt/Dowel Holes: 8, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496743)$410.01
No Picture
Gear - Transmission Clutch Oil Pump - For John Deere tractor models 2510, 2520, 3020 (s/n 122999), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 500C, 510, 540B, Replaces John Deere OEM number R48176, (Item #: 125908)$217.98
Head Bolt - For John Deere tractor models 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6620, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950, Compatible with John Deere Construction and industrial models 690B, 693C, 740, Replaces John Deere OEM number R88043, (Item #: 158360)$4.70
Head Bolt - For John Deere tractor models 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6620, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950, Compatible with John Deere Construction and industrial models 690B, 693C, 740, Replaces John Deere OEM number R88044, Diameter: 0.562", Thread: UNRC2A, Length: 6.280", Thread Length: 1.614", Body or Point Diameter: 0.504", Body Length: 0.331", (Item #: 158361)$5.10
Head Bolt - For John Deere tractor models 500, 3010, 3020, 4000, 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4955, 4960, 5720, 6620, 7020, 7720, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8960, Compatible with John Deere Combine (s) 1085, 1177, 1177H4, 1188, 1188H4, 6620, 6622, 7720, 8820, 9500, 9500 SH, 9600, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9940, 9950, 9960, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, 510, 540E, 548E, 640E, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 646C, 648E, 653E, 690, 690A, 690B, 690C, 693B, 693C, 740, 740A, 740E, 743, 748E, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, Replaces John Deere OEM number R88045, R62420, Diameter: 0.562", Thread: UNRC2A, Length: 7.402", Thread Length: 1.614", Body or Point Diameter: 0.504", Body Length: 0.331", (Item #: 158362)$7.00
Head Bolt - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8640, 8650, 8760, 8960, Compatible with John Deere Combine (s) 9500, 9500 SH, 9600, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 9960, Compatible with John Deere Engine (s) 6076 (s/n 499999-earlier), 6076AF (M Marine s/n 499999-earlier), 6090 (9.0 L Contruction and Forestry Applications), 6090 (9.0L Tier 3 Power Teck Plus), 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R121322, DZ100946, R88045, Diameter: 0.562", Thread: UNC2A, Length: 7.323", Thread Length: 6.496", Flange Diameter: 1.091", Head Height: 0.630", (Item #: 159236)$13.60
Injection Pump Gear, Used - For John Deere tractor models 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 7020, Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 653E, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, Replaces John Deere OEM nos R68274, R50394, Teeth: 60, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438347)$45.01
Input Shaft Synchronizer Drum, Used - For John Deere tractor models 2510, 2520, 3020, 4000 (s/n 201000-later), 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R63072, .71" Thick, For a new version of this item use Item #: 165807, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498439)$110.01
Intake Valve - For John Deere tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, Compatible with John Deere Construction and industrial models 644, 646, 690, 693, 740, 743, 762, 770, 772, 790, 792, 850, Replaces John Deere OEM number R50358, (Item #: 128721)$10.98
Intake Valve - For John Deere tractor models 3010, 3020, 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4440, 4450, 4520, Compatible with John Deere Combine (s) 6600, 6620, 6622, 7700, 7720, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644A, 690, 690A, Replaces John Deere OEM number R43883, 45 degree valve, (Item #: 166189)$14.70
Lifter - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4450 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4650 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, and 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, and 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, and 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Item #: 112420, Ref: R52773)$7.80
Load Sensing Shaft - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, Replaces John Deere OEM number R46513, AR41773, 21.187" Long, 1.124" Diameter, (Item #: 112006)$86.00
Load Sensing Shaft, Used - For John Deere tractor models 4000 (from S/N 250001), 4020 (from S/N 250001), 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R46513, 21.187" Long, 1.124" Diameter, For a new version of this item use Item #: 112006, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412006)$44.01
Low Range Pinion Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R59829, R50340, 24 Straight Cut Teeth, 17 Helical Cut Teeth, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429410)$95.01
Piston Pin Bushing - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6620, 6622, 7720, 8820, Compatible with John Deere Harvester (s) 5720, 9940, Compatible with John Deere Construction and industrial models 644D, 740A, 762A, Replaces John Deere OEM number R60724, (Item #: 166125)$5.98
PTO Clutch and Brake Plate - For John Deere tractor models 4050, 4240, 4250, 4430 (s/n 044989-later), 4440, 4450, 4640, 4650, 4840, 4850, Replaces John Deere OEM number R56548, O.D.: 7.770", I.D.: 5.440", (Item #: 127093)$18.20
Push Rod, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8310R, 8400, 8410, 8420, 8430, 8440, 8520, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620, Compatible with John Deere Combine(s) CTS, 6620, 6622, 7720, 8820, 9500, 9510, 9550, 9560, 9600, 9610, 9650, 9660, 9750, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 9940, 9950, 9960, 9965, 9970, 9976, 9986, 9996, Compatible with John Deere Sprayer(s) 4920, Replaces John Deere OEM nos R85027, R40680, 12.375" Long, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498958)$4.01
Rear Oil Seal Retainer Plate, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4050 (Engine s/n 243505-earlier), 4230, 4240 (Engine s/n 243505-earlier), 4250 (Engine s/n 243505-earlier), 4320, 4430, 4440 (Engine s/n 243505-earlier), 4450 (Engine s/n 243505-earlier), 4520, 4630, 4640 (Engine s/n 243505-earlier), 4650 (Engine s/n 243505-earlier), 4840 (Engine s/n 243505-earlier), 4850 (Rear Engine Oil Seal Housing For John Deere. Replaces R41406), 7020, 8430 (Engine s/n 243505-earlier), 8440, 8450 (Engine s/n 243505-earlier), Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940 (Engine s/n 243505-earlier), Replaces John Deere OEM nos R125027, R26057, Replaces Casting nos R78124, R115050, Aluminum Housing, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431260)$15.01
No Picture
Rear Oil Seal Retainer Plate, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4050 (Engine s/n 243505-earlier), 4230, 4240 (Engine s/n 243505-earlier), 4250 (Engine s/n 243505-earlier), 4320, 4430, 4440 (Engine s/n 243505-earlier), 4450 (Engine s/n 243505-earlier), 4520, 4630, 4640 (Engine s/n 243505-earlier), 4650 (Engine s/n 243505-earlier), 4840 (Engine s/n 243505-earlier), 4850 (Rear Engine Oil Seal Housing For John Deere. Replaces R41406), 7020, 8430 (Engine s/n 243505-earlier), 8440, 8450 (Engine s/n 243505-earlier), Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940 (Engine s/n 243505-earlier), Replaces John Deere OEM nos R41406, R26057, R78124, Cast Housing, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496616)$15.01
Reduction Shaft, Used - For John Deere tractor models 4430 (s/n 038302-later), 4440, Replaces John Deere OEM nos AR70725, Replaces Casting nos R58437, Splines: 14/ 20/ 48, Length: 11.75", Bushing Diameter: .75", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434297)$200.01
Remanufactured Bare Block, Remanufactured, R65693, R87554, R72132 - For John Deere tractor models 4050, 4240, 4250, 4440, Compatible with John Deere Combine (s) 6600, 6602, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 5720, 5730, Compatible with John Deere Engine (s) 6466D (s/n 160279-earlier), 6466T (s/n 160129-earlier), Replaces John Deere Casting number R65693, R87554, R72132, Our remanufactured bare blocks have been; cleaned, inspected, (Item #: 204929)$1575.01
Rod Bushing - For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6602, 6620, 6622, 7720, 8820, Compatible with John Deere Harvester (s) 5720, 9940, Compatible with John Deere Construction and industrial models 644C, 646C, 740A, 743, 743A, 762A, Compatible with John Deere Engine (s) 6466A (Diesel), 6466T (Diesel), Replaces John Deere OEM number R60724S, Boreable, (Item #: 167490)$4.98
Shift Collar - Reverse Range, Used - For John Deere tractor models 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R50603, Reverse Range, Teeth: 19, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433710)$41.01
Shifter Cam, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR32692, AR65493, AR74079, AR99412, RE46990, Replaces John Deere Casting nos R74252, R33400, R61107, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497642)$75.01
Synchronizer Brake Drum - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R63073, (Item #: 165724)$222.00
Tach Drive Assembly, Used - For John Deere tractor models 4040, 4230, 4240 (Engine s/n 160279-earlier), 4320, 4430, 4440 (Engine s/n 160279-earlier), 4520, 4630, 4640 (Engine s/n 161495-earlier), 6030, 7020, 7520, 8430 (Engine s/n 161132-earlier), 8440 (Engine s/n 161132-earlier), 8630 (Engine s/n 039936-earlier), 8640 (Engine s/n 039936-earlier7720 Engine s/n 127366-earlier), Compatible with John Deere Combine(s) 6600, 6602, 6620 (Engine s/n 127366-earlier), 6622 (Engine s.n 127366-earlier), 7700, 7720 (Engine s/n 127366), 8820 (Engine s/n 127366-earlier), Compatible with John Deere Harvester(s) 5200, 5400, 5460, 5720, 5730 (Engine s/n 127366-earlier), 5820, Replaces John Deere OEM nos R43851, Assembly Includes: Housing, Gear Shaft, Teeth: 20, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497544)$20.01
Thrust Washer - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T/A 6cyl eng.), (4430 SN# 335845 and up 6.404T/A 6cyl eng.), (4440 6.466T SN# 253372 and less and 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.) (Item #: 168002, Ref: AR77747)$18.30
Timing Gear Cover, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 7020, 8430, 8440, 8640, Compatible with John Deere Combine(s) 6600, 6602 (HS), 7700, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, Compatible with John Deere Construction and industrial models 644C, 646C, 690B, 693B, 740, 740A, 743, 743A, 762A, 762B, Replaces John Deere OEM nos R50352, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498787)$50.01
Torsional Dampener Cover, Used - For John Deere tractor models 4040, 4230 (s/n 016359-later), 4240, 4430 (s/n 022373-later), 4440, 4630 (s/n 008455-later), 4640, 4840, Replaces John Deere OEM nos R56721, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432524)$176.01
Transmission Drive Shaft Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos R46119, Quad Syncro, High Range Pinion, Teeth: 19 and 24, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498552)$50.01
Transmission Drive Shaft Housing, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR54442, Replaces Casting nos R50221, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498433)$50.01
Transmission Drive Shaft, Used - For John Deere tractor models 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R50843, Replaces Casting nos R55460, Quad Range, Syncro Range, and Creeper Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499609)$375.01
Transmission Input Shaft Blocker, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR77817, RE227962, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498443)$291.01
Transmission Input Shaft, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R50154, Overall Length 15 7/8", Splines: 19 and 25, Quad and Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498446)$150.01
Transmission Rear Clutch Pack Plate - For John Deere tractor models 4240, 4430 (s/n 044989-later), 4440, 4520, 4620, 4630 (s/n 016987-earlier), 4640, 4840 (All With Powershift Transmissions), Replaces John Deere OEM number R46418, R43209, R59955, R81922, ID: 5-7/16" (138mm), OD: 8-1/2" (217mm), 6 Tabs, (Item #: 117040)$11.98
Valve Cover, Used - For John Deere tractor models 4040, 4050, 4055, 4230 (s/n 432313-later), 4240, 4240S, 4250, 4255, 4350, 4430 (s/n 432402-later), 4440, 4450, 4455, 4555, 4560, 4630 (s/n 432480-later), 4640 (s/n 001267-later), 4650, 4755, 4760, 4840 (s/n 001267-later), 4850, 4955, 4960, 7700, 7710 (s/n 089999-earlier), 7800, 7810 (s/n 089999-earlier), 8100, 8200, 8300, 8430 (s/n 001267-later), 8440 (s/n 001267-later), 8560 (s/n 499999-earlier), 8640 (s/n 001267-later), 9100, Compatible with John Deere Combine(s) 1085, 1177, 1188, 1188H4, 9550 (s/n 143079-later), 9550 SH (s/n 143079-later), Compatible with John Deere Harvester(s) 3510 (s/n 060036-earlier), 5200 (s/n 432480-later), 5400 (s/n 432480-later), 5440, 5720, 6610, 6650, 9940, 9950, 9960, 9965, 9970, 9976, 9986, Compatible with John Deere Construction and industrial models 530B (s/n 017001-later), 535 (s/n 017001-later), 540E, 548E, 560D (s/n 604613-earlier), 640E, 644A, 644C, 644D, 644E, 644ER, 644G, 644H (s/n 074637-earlier), 646, 646B, 646C, 648E, 660D, 690, 690A, 690B (s/n 424618-later), 690C, 690CR, 693B, 693C, 740 (s/n 424618-later), 740A, 740E, 740G (s/n 565684-earlier), 743, 743A, 748E, 748G (s/n 565684-earlier), 748GII (s/n 565685-604613), 762A, 762B, 770A, 770AH, 770B, 770BH, 770C, 770CH, 772A, 772AH, 772B, 772BH, 772CH, 792 (DLC), 848G, 850B, 850CII, Compatible with John Deere Engine(s) 6076, 6081HF001 (s/n 199999-earlier), 6081TF001 (s/n 199999-earlier), 6404A (s/n 432480-later), 6404T (s/n 432402-later), 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM nos RE37448, Center Vent, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433121)$98.01
Valve Lifter, Used - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4050, 4230, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (s/n 1974-1981), 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 1188, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier, 123114-152141), 500B, 500C, 510, 644A, 644C, 644D, 646, 646B, 646C, 653E, 690, 690A, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, 892DLC, Replaces John Deere OEM number R52773, For a new version of this item use Item #: 112420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451751)$2.01
Valve Seat - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 9940, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B, 693B (Canada), 693C, 740 (Skidder and Grapple Skidder), 740A, 743, 743A, 762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 790D, 792, 793 (D), 850B, 892 (DLC), Compatible with John Deere Engine (s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R78702, (Item #: 167396)$0.98
No Picture
ValveService Kit - Cylinder HEAD Service KIT For tractor models 2840, 2940, 2950, 2955, 4000, 4020, 4030, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. Contains: springs, guides, locks, (no valves). (Item #: VSKD329)$114.37
Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Item #: 121443, Ref: T20129)$3.90
Engine Pistons and Sleeves
No Picture
Exhaust Sleeve - Use with R0318. For tractor models 4050, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4650, 4840, 4850, 7020, 8430, 8440. (Item #: 101611, Ref: R2688)$53.00
No Picture
Piston Kit - Engine SN# -231856 and Blocks Marked R74352 Keystone Top Compression Ring With Connecting Rod marked R57303, R67320 For 4440, 4640, 4840, 8430, 8440, 8450 (Item #: PK460)$1081.60
No Picture
Piston Kit - Engine SN# 252663- Connecting Rod marked R71074 Keystone Top Compression Ring For 4250, 4440, 4450, 4640, 4650, 6620, 7720 (Item #: PKD6466)$1382.73
No Picture
Piston Pin Bushing - For tractor models 4440, 4640, 4840, 8430, 8440, 8450. For trapezoid shaped bushing, not rectangular. (Item #: TP-R60724)$21.05
Piston Pin Bushing - For tractor models 4250, 4440, 4450, 4640, 4650, 6620, 7720. Price shown is for each, sold only in multiples of 6 items. (Item #: TP-R74008)$27.86
No Picture
Piston Sleeve - For tractor models 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4755, 4760, 4840, 4850, 4955, 4960, 5460, 5720, 5730, 644C, 644D, 644E, 644ER, 646A, 6602, 6620, 6622, 690C, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 7700, 770A, 770B, 770BH, 7800, 790D, 792D, 792LC, 8100, 8300, 8430, 8440, 8450, 850B. All with either 6.466D, 6.076H, 6.076T, 6.076A, 6.466T, or (6.466A up to SN# 233592 and above 317859)engines. (Item #: AR63060)$55.64
No Picture
Sleeve Assembly (6 Required) - 4.563 Bore. For tractor models 4440, 4640, 4840 with 466T, A Diesel Engine - A (To Eng S#233592), T (To Eng S#253372) (Item #: R-AR72079)$184.28
No Picture
Sleeve Assembly (6 Required) - 4.563 Bore For 4250, 4440, 4450, 4640, 4650 with 466T, A Diesel Engine A (From Eng S#317859), T (From Eng S#253373) (Item #: R-AR100646)$189.24
Engine Rings
Piston Ring Set - Standard - Single Cylinder - For John Deere tractor models 4250, 4440, 4450, 4640, 4650, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, Compatible with John Deere Construction and industrial models 644C, 644D, 646C, 690C, 693C, 740A, 743, 743A, 762A, 762B, 770A, 772A, 790, 790D, 792, 850B, Compatible with John Deere Engine (s) 6076T (turbo diesel), 6466T (turbo diesel), Replaces John Deere OEM number RE48380, Bore: 4.5625", Ring Size: Standard, Compression Rings per Piston: (2) @ .156", Oil Rings per Piston: (1) @ .188", Top Groove Size: .156", 2nd Groove Size: .156", 3rd Groove Size: .188", Sold per cylinder, (Item #: 120942)$42.00
Exhaust System
Adapter Kit - Turbo to Elbow - For John Deere tractor models 4040, 4040S, 4050, 4240, 4240S, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 5720, 9940, Compatible with John Deere Construction and industrial models 550, 555, 644, 644A, 644B, 646, 646B, 690, 690A, 690B, 740, Replaces John Deere OEM number R43724G, Turbo to elbow adapter kit with piston ring grooves for a better exhaust seal, Piston Rings Included, For replacement ring use Item #: 101565, (Item #: 163566)$99.00
No Picture
Air Cleaner Stack - Chrome - For John Deere tractor models 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 7020, Replaces John Deere OEM number R49526, 36" Tall, 4-1/2" I.D., Additional Handling and Oversize Fees Apply To This Item, (Item #: 114761)$142.00
Air Cleaner Stack, Used - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 7020, Replaces John Deere OEM nos R49526, O.D.: 4-1/2", Length: 35-1/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498830)$89.01
Exhaust Manifold Elbow Sleeve, Used - For John Deere tractor models 4040, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9940, 9950, Compatible with John Deere Construction and industrial models 300D, 301, 310D, 315D, 415B, 515B, Compatible with John Deere Hay Cutting(s) 3430, 3830, Replaces John Deere OEM number R43724, For a new version of this item use Item #: 101611, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401611)$29.01
Exhaust Manifold - Front, Used - For John Deere tractor models 4050 (E with 6466TR), 4050 (with 6466DR s/n 294598-306869), 4250 (with nxxiwith 6466TR), 4430, 4440 (with 6466TR), 4450 (with 6466TR), 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, Compatible with John Deere Combine(s) 6600, 6602 (SH), 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 9940, Compatible with John Deere Engine(s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R56995, AR54563, R50391, For a new version of this item use Item #: 100547, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498617)$87.01
Exhaust Manifold - Rear Half, Used - For John Deere tractor models 4040, 4050 (E with 6466TR), 4050 (with 6466DR s/n 294598-306869), 4055, 4240S, 4250 (with 6466TR), 4255, 4320, 4430, 4440 (with 6466TR), 4450 (with 6466TR), 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 7020, 8430, 8440, 8450, 8560, 8570, 9100, 9120, Compatible with John Deere Combine(s) 6600, 6602 (SH), 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 6610, 6650, 7200, 9940, 9950, 9960, 9965, 9976, 9986, Compatible with John Deere Engine(s) 6076 (s/n 499999-earlier), 6076 (AF/HF/FT/AFN), 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R46472, For a new version of this item use Item #: 101612, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401612)$81.01
No Picture
Exhaust Stack - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Curved, ID: 3-15/16", Lg 5" Outlet", Length: 48", Color: Black, Flared on inlet end to fit turbo, Curved Stack - Chrome Plated use Item #: 114771, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114863)$195.00
Exhaust Stack - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Straight, ID: 3-15/16", Length: 48", Lg 5" Outlet, Color: Black, Flared on inlet end to fit turbo, Straight Stack - Chrome Plated use Item #: 114771, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114866)$128.00
Exhaust Stack - 3-15/16 - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Straight, ID: 3-15/16" FL, Length: 48", Flared Inlet, Color: Chrome, Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”, Clamp use Item #: 114870, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114871)$226.00
No Picture
Exhaust Stack - 3-15/16" FL x 48",Curved Black - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Curved, ID: 3-15/16" FL, Length: 48", Flared Inlet, Color: Black, Clamp use Item #: 114868, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114869)$137.00
No Picture
Exhaust Stack - 3-15/16" FL x 48", Curved Chrome - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Curved, ID: 3-15/16" FL, Outlet: 4", Length: 48", Flared Inlet, Color: Chrome, Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”, Clamp use Item #: 114869, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114868)$175.00
No Picture
Exhaust Stack - 3-15/16" FL x 48",Straight Black - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Straight, ID: 3-15/16" FL, Length: 48", Flared Inlet, Color: Black, Straight Stack - Stainless Steel use Item #: 114771, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114872)$78.00
No Picture
Exhaust Stack - Curved Chrome - For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Style: Curved, ID: 3-15/16", Outlet O.D.: 5", Length: 48", Color: Chrome, Flared on inlet end to fit turbo, Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”, For Clamp use Item #: 114863, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114862)$320.00
Intake Manifold, Used - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, Replaces John Deere OEM nos R52288, R81927, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498531)$129.01
Manifold - Rear Section for Two Piece Exhaust System for models:4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450. Gaskets NOT included. (Item #: 101612, Ref: TP-R46472)$140.00
Manifold Exhaust Elbow - For John Deere tractor models 4050 (w/ 6466DR s/n 294598-306869), 4430, 4440 (w/ 6466TR), 4630 (w/ 6404AR s/n 401567-earlier), Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5720, 5730, Compatible with John Deere Engine (s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R56994, R50392, (Item #: 180483)$208.00
Manifold Gasket Set - For tractor models: (4050 from s/n 6510 and up), 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450. (Item #: 127263, Ref: R0313G)$24.70
No Picture
Muffler Clamp - Used with mufflers AR61073, AR86599, RE20224, AR86602, RE20222 and R1679. For tractor models (4050 from SN# 5511 and up), 4055, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4630, 4640, 4555, 4650, (4755, 4955 up to SN# 10000), 4840, 4850. (Item #: 121384, Ref: RE20223)$21.00
Muffler Clamp - Used with Mufflers R1083 and R1085, this two piece muffler clamp is used on the following John Deere models with flared muffler inlets: 4020, 500, 3010, 3020, 4000, 4010, 4030, 4230, 500A, 510, 570B, 570A, 4040, 4240, 4440. Replaces part numbers AR46323, DR-300, R32235 (Item #: 114772, Ref: AR46323)$19.30
Muffler Extender Kit - 3.500" I.D. - For John Deere tractor models 4430, 4440, 4630, 4640, Fits aftermarket mufflers, I.D.: 3-1/2", Length: 18", Includes Clamp And Raincap, Straight, Black, For 3-5/8" OEm muffler use Item #: 114849, (Item #: 161181)$70.00
Muffler Extender Kit - 3.625" I.D. - For John Deere tractor models 4430, 4440, 4630, 4640, Replaces John Deere OEM number R66690, Fits factory oem muffler, I.D.: 3-5/8", Length: 18", Straight, Includes Clamp And Raincap, Black, For use with aftemarket 3-1/2" O.D. muffler use Item #: 161181, (Item #: 114849)$65.00
Muffler, Vertical - Oval body 4-3/4" x 8" shell dimensions, A= 1-1/2" inlet length, B= 3-15/16" inlet I.D., C= 33" shell length, D= 3" outlet length, E= 3-1/2" outlet O.D., F= 37" overall length. New design replaces flared inlet. For tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4630, 4840, (4540 SN# 5511 and up). Replaces AR86599, AR48773, AR61073. For the clamp, order item 121384. (Item #: 101192, Ref: RE20224)$145.00
Water Manifold, Used - For John Deere tractor models 4240, 4430, 4440, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (Engine s/n 227532-earlier), 8440 (Engine s/n 227532-earlier), 8450 (Engine s/n 227532-earlier), Compatible with John Deere Combine(s) 6600 (6404TH), 6602 (6466TH), 6620 (s/n 227289-earlier), 6622, 7700 (6404TH), 7720 (s/n 227289-earlier), 8820 (s/n 227289-earlier), Compatible with John Deere Harvester(s) 5200, 5440, 5720, 5730 (engine s/n 227532-earlier), 9940 (engine s/n 227289-earlier), Replaces John Deere OEM nos RE12848, R50415, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430363)$75.01
Fuel System / Air Intake
Air Element Inner - Air cleaner element, inner. Dimensions for height: 14-1/4~outside diameter: 4-11/16~ inside diameter: 5/8 and 3-15/16. Use on Combines: 6620, 7720 for 466 diesel Turbo engine. For 4050, 4250, 4320, 4430, 4440, 4450, 6600, 6602, 6620, 7445, 7700, 7720 Replaces AR49840, AR61968, AR79680 (Item #: 126005, Ref: TP-AR79680)$34.00
Air Element Outer - Air Cleaner element, outer. Dimensions for height: 17-1/16~outside diameter: 9-3/32~ inside diameter: 3/8 and 5-1/4. Used on Combine: 7720 for 466 diesel Turbo engine. For 4050, 4250, 4320, 4430, 4440, 4450, 6600, 6602, 6620, 7445, 7700, 7720 (Item #: 125888, Ref: TP-AR79679)$66.31
Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517)$32.00
Fuel Filter Support, Used - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 6030, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5820, Compatible with John Deere Construction and industrial models 644B, 644C, 644D, 646, 646B, 646C, 653E, 690B, 690C, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 790, 792, 850, 850B, 855, 860B, 862, 890, 890A, 892DLC, Replaces John Deere OEM nos R50427, Replaces John Deere Casting nos RE24359, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441632)$25.01
Fuel Hand Pump - For John Deere tractor models 4050, 4055, 4250, 4440, 4450, 4455, 4640, 4650, 4755, 4760, Compatible with John Deere Combine (s) 6620, 6622, 7700, 8820, Compatible with John Deere Harvester (s) 5440, 5720, 9950, Compatible with John Deere Construction and industrial models 644C, 644D, 644E, 646C, 690B, 690C, 690CR, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 772A, 772AH, 772B, 790D, 850B, Replaces John Deere OEM number RE20042, AR89956, RE27848, RE12386, (Item #: 161804)$130.00
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS2522, AR88906 - For John Deere tractor model 4440 (s/n 068359-later), Compatible with John Deere Engine (s) 6466D (s/n 115330-earlier), Replaces John Deere OEM number AR88906, AR70235, AR98272, RE11028, SE500152, SE500153, SE500456, Replaces Bosch manufacturer number PES6A-RS2522, PES6A-RND328, 0-400-876-268, 0-400-876-269, (Item #: 200744)$2317.01
Fuel Injection Pump, Remanufactured, Denso, 190000-3280, AR88906 - For John Deere tractor model 4440 (s/n 068359-later), Compatible with John Deere Engine (s) 6466D (s/n 115330-earlier), Replaces John Deere OEM number AR88906, AR70235, AR98272, RE11028, SE500152, SE500153, SE500456, Replaces Denso manufacturer number 190000-3280, (Item #: 200825)$2320.01
Fuel Injection Pump, Used - For John Deere tractor model 4440 (s/n 068359-later), Compatible with John Deere Engine(s) 6466D (s/n 115330-earlier), Replaces John Deere OEM number AR88906, AR70235, AR98272, RE11028, SE500152, SE500153, SE500456, Replaces Bosch Mfg nos PES6A-RS2522, PES6A-RND328, 0-400-876-268, 0-400-876-269, For a Remanufactured version of this part use Item #: 200744, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429402)$1300.01
Fuel Injector - For John Deere tractor models 4040, 4230, 4240, 4440, Compatible with John Deere Combine (s) 6600, 6620, 7700, Replaces John Deere OEM number AR85541, SE500106, For a Remanufactured version of this sku use Item #: 210629, (Item #: 165615)$77.00
Fuel Injector - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, Compatible with John Deere Engine (s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number AR74665, For a Remanufactured version of this sku use Item #: 210631, (Item #: 165630)$66.00
Fuel Injector, Remanufactured, AR74665 - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, Compatible with John Deere Engine (s) 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number AR74665, For a New version of this sku use Item #: 165630, (Item #: 210631)$200.01
Fuel Injector, Remanufactured, AR79686 - For John Deere tractor models 4040, 4230, 4240, 4440, Compatible with John Deere Combine (s) 6600, 7700, Replaces John Deere OEM number AR79686, For a New version of this sku use Item #: 165625, (Item #: 210630)$210.01
Fuel Injector, Remanufactured, AR85541 - For John Deere tractor models 4040, 4230, 4240, 4440, Compatible with John Deere Combine (s) 6600, 6620, 7700, Replaces John Deere OEM number AR85541, SE500106, For a New version of this sku use Item #: 165615, (Item #: 210629)$200.01
Fuel Leak-Off Line Kit - This Fuel Leak-Off Line Kit is used on the following John Deere 6 cylinder diesel engines: 404D, 6404T, 6404A, 6466D, 6466T, 6466A. The kit replaces R79606 Tee Fittings, R79604 nuts, R51936 sealing washers. Replaces assembly part number RE27786, RE15805, RE21103, AR88495. Used on John Deere Tractors: 4040, 4040S, 4050, 4240, 4240S, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8225R, 8245R, 8270R, 8295R, 8295RT, 8320R, 8320RT, 8345R, 8345RT, 8440, 8450, 8640, 8650. Used on John Deere Industrial / Construction: 644C, 644D, 644E, 644ER, 644EZ 646C, 653E, 690B, 690C, 693B, 693C, 740, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 793D, 850B, 892DLC. Used on John Deere Forage Harvester: 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830. John Deere Cotton Pickers: 9940, 9950. Used on John Deere Combines: 6602, 6620, 6622, 7720, 8820 (Item #: 189070, Ref: RE27786)$111.00
No Picture
Fuel Line Clamp, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2240 (s/n 349999-earlier), 2355, 2510, 2555, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3155, 3255, 4000 (s/n 201000-later), 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5440, 5460, 5720, 5820, 7440, 7445, 7450, 7455, 9910, 9920, 9930, 9940, 9950, Compatible with John Deere Hay Cutting(s) 800, 830, 2250, 2270, 2320, 2420, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, 6700, Replaces John Deere OEM nos R34766, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448132)$1.51
Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Item #: 111144, Ref: AR50041)$23.40
Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R)$18.20
Injection Line - #1 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96857, AR69446, Tubing with fittings, For Cylinder #5 use Item #: 162801, (Item #: 162795)$43.00
Injection Line - #2 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96858, AR69447, Tubing with fittings, For Cylinder #5 use Item #: 162799, (Item #: 162796)$24.98
No Picture
Injection Line - #2 Cylinder, Used - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96858, AR69447, For a new version of this item use Item #: 162796, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464437)$22.01
Injection Line - #3 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR, s/n 003900-earlier), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96859, AR69448, AR96448, Tubing with fittings, (Item #: 162798)$50.00
No Picture
Injection Line - #3 Cyliner, Used - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR, s/n 003900-earlier), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96859, For a new version of this item use Item #: 162798, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464439)$24.76
Injection Line - #4 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96860, AR69449, Tubing with fittings, For Cylinder #1 use Item #: 162801, (Item #: 162799)$43.00
No Picture
Injection Line - #4 Cylinder, Used - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96860, For a new version of this item use Item #: 162799, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464440)$23.01
Injection Line - #5 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96861, AR69450, Tubing with fittings, For Cylinder #1 use Item #: 162801, (Item #: 162800)$44.00
No Picture
Injection Line - #5 Cylinder, Used - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96861, For a new version of this item use Item #: 162800, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 464441)$23.26
Injection Line - #6 Cylinder - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96862, AR69451, Tubing with fittings, (Item #: 162801)$29.98
Injection Line - #6 Cylinder, Used - For John Deere tractor models 4240S, 4350, 4430 (engine s/n 445570-later), 4440 (with 6466TR), 4630 (engine s/n 445948-later), 4640 (with 6466AR 07, 08, 09, 10), Replaces John Deere OEM number AR96862, AR69451, Tubing with fittings, For a new version of this item use Item #: 162801, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451049)$22.61
Tachometer Cable - This Tachometer Cable is 39-1/2 inches over all length, 5/8 - 18 threads x 7/8 - 18 threads with Key on one end. Used on John Deere Tractors: 4040, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8640. Also Fits John Deere Combine 6600, 6602, 7700. (Item #: 121542, Ref: AR21085)$36.00
Tachometer Cable, Used - For John Deere tractor models 4040, 4240, 4430, 4440, 4455 (Made in Mexico 4630), 4630, 4640, 4840, 8020, 8430, Compatible with John Deere Combine(s) 6600, 6602, 7700, Compatible with John Deere Construction and industrial models 760, Replaces John Deere OEM number AR21085, Length: 40", For a new version of this item use Item #: 121542, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421542)$19.01
Tachometer for Power Shift Transmission - This Tachometer is used on the following John Deere Tractors with Power Shift Transmissions: 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. Used with Tachometer Cable AR21085 (not included). Replaces R50652, AR60514, RE206861, RE152798, AR80826 (Item #: 160952, Ref: AR60514)$198.00
Tachometer for Quad-Range Transmission - This Tachometer is used on the following John Deere tractors with Quad-Range Transmission: 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. It is used with Tach cable AR21085 (not included). It replaces AR60515, RE206860, R50652 (Item #: 160953, Ref: AR60515)$190.00
Tachometer Gauge, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4630, 4640, Replaces John Deere OEM number AR60515, RE206860, For a Remanufactured version of this part use Item #: 204058, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499861)$136.01
Tachometer Gauge, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, Replaces John Deere OEM number AR60514, RE152798, RE206861, Power Shift Transmission, For a Remanufactured version of this part use Item #: 204057, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404057)$163.01
Hitch / Drawbar
Center Link Assembly - For John Deere tractor models 4000 (s/n 250001-earlier), 4020 (s/n 250001-earlier), 4230 (Hi-Crop), 4240 (Hi-Crop, s/n 006627-later), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop, s/n 013166-later), 8430, Replaces John Deere OEM number RE44560, (Item #: 170299)$175.00
Center Link Assembly (Cat III) - Consisting of the following items: (1) R80052, (1) RE56211, (1) AR74181 and (1) R66297. This Category III top link assembly is used on John Deere 4250, 4255, 4440 serial number 013167 and up, 4450, 4455 (Item #: 126892, Ref: AR34210)$254.00
Center Link Body - Part number R47067 measures 10.750 inches long. It has 1.375 inch -8 thread. Left hand thread on one side, right hand thread on the other. Used on John Deere: 4000 Serial Number 250001 and up, 4020 Serial Number 250001 and up, 4230 HI-CROP, 4320, 4430 HI-CROP, 4440 Serial Number 013166 and below, 4520 Serial Number 010019 and up, 4620, 4630 Serial Number 030390 and below, 5020 Serial Number 028137 and up, 6030, 7020, 7520. (Item #: 170285, Ref: R47067)$104.00
Center Link Bracket, Used - For John Deere tractor models 4250, 4255, 4440, 4450, 4455, Replaces John Deere OEM nos R60766, Pin Hole Diameter: 1 1/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497128)$75.01
Center Link End, Hook - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4320, 4430, 4440, Replaces John Deere OEM number AR61659, 1.375 " - 8 Right Hand UNC Thread, (Item #: 170270)$172.00
Center Link End, Tractor Side - Used on John Deere models: 4250, 4255, 4440, 4450, 4455. This Top Link end is used on the tractor side. It has a 1.268 inch pin hole and 1.375 inch 8 Left Hand Tread. Replaces AR74181, AL39749. (Item #: 170272, Ref: AR74181)$208.00
Center Link Handle - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548)$6.98
Drawbar - This Drawbar has a 2 inch offset. It is 45.625 inches long, 3.000 inches wide and 1.500 inches high. Holes are 1.031 inches in diameter and are located at 1.656, 2.963, 5.532 and 8.581 inches from the front. It replaces original John Deere part number R61184. (Item #: 108946, Ref: R61184)$165.00
Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Item #: 128172, Ref: AR69988)$23.80
Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728)$19.70
Drawbar Rear Support Bracket LH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Replaces John Deere part numbers AR96600, R64749, John Deere Casting number R72870. Includes pins. (Item #: 180480, Ref: AR96600)$217.00
Drawbar Rear Support Bracket RH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Fits John Deere Tractor (s) 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere part numbers AR96599, R64750. John Deere Casting number R72869. Pins included. (Item #: 180478, Ref: AR96599)$206.00
Drawbar Support Load Sensing Bushing - Used with AR76096 and AR83603 Front Drawbar Supports, this bushing replaces John Deere part numbers R71476 and R41084 (Item #: 168089, Ref: R71476)$23.10
Drawbar Support Spacer - Used on John Deere Tractors 4050, 4055 with Regular Drawbar, 4250 with Cat 3 Narrow, 4255 with Regular or Cat 3 Narrow Drawbar, 4440 with Regular Drawbar, 4450 with Cat 3 Narrow, 4455 with Cat 3 Narrow. (Item #: 110118, Ref: R64753)$28.60
Drawbar Support Spacer, Used - For John Deere tractor models 4050, 4055 (with Regular Drawbar), 4250 (with Cat 3 Narrow), 4255 (with Regular or Cat 3 Narrow Drawbar), 4440 (with Regular Drawbar), 4450 (with Cat 3 Narrow), 4455 (with Cat 3 Narrow), Replaces John Deere OEM number R64753, Requires 2 per drawbar support, For a new version of this item use Item #: 110118, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410118)$15.76
Drawbar, Used - For John Deere tractor models 4040, 4050 (With Wide Swinging Drawbar), 4055 (With Category 2 Three Point), 4240 (With Wide Swinging Drawbar), 4250 (With Wide Swinging Drawbar), 4255 (Will fit Category 2 and 3), 4440 (With Wide Swinging Drawbar), 4450 (With Wide Swinging Drawbar), 4455 (Check Measurements), Replaces John Deere OEM number R61184, Length: 45-5/8", Width: 3", Height: 1-1/2", Thickness: 1-1/2", Offset: 2", Diameter: 1.031", Hole Spacing: 1.656", 2.963", 5.532" and 8.581" From Front, For a new version of this item use Item #: 108946, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408946)$112.01
Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503)$7.10
No Picture
Front Drawbar Dowel Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795)$11.51
Front Drawbar Support - If you are replacing this part, you will also need replace the bushings: R31438 x 1, R40557 x 1, R40558 x 1, R71476 x 2. These are each sold individually. This front drawbar support is original equipment on John Deere 4240 and 4440 tractors. (Item #: 170514, Ref: AR76096)$1739.01
Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438)$7.30
Front Pull Arm Pin, Used - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, For a new version of this item use Item #: 114090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435641)$7.01
Front Pull Arm Washer - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442)$14.10
No Picture
Front Pull Arm Washer, Used - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774)$8.26
Handle - For John Deere tractor models 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3640, 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R66297, (Item #: 170295)$15.00
Load Control Arm Support, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R51195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431755)$25.01
Load Control Shaft Bushing and O-Rings - For John Deere tractor models 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6030 (s/n 33766-later), Replaces John Deere OEM number AR54481, Includes R53177 Back-up Ring and R53180 O-Ring, Sold individually, For Load control shaft use Item #: 112006, (Item #: 128537)$35.00
No Picture
Load Control Shaft Bushing with O-Ring - For John Deere tractor models 4000 (s/n 250001-later), 4020, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R54785, OS: .020", (Item #: 176696)$25.60
Lower Drawbar Support Plate - For John Deere tractor models 4055 (with Regular Drawbar), 4250 (with Cat 3 Narrow), 4255 (with Regular or Cat 3 Narrow Drawbar), 4440 (with Regular Drawbar), 4450 (with Cat 3 Narrow), 4455 (with Cat 3 Narrow), Replaces John Deere OEM number R64751, Thickness: 3/4", Width: 3", Length: 15-3/4", (Item #: 110117)$61.00
Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558)$8.70
Pin, Front Pull Arm - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Mexico), Compatible with John Deere Harvester (s) 740, 9940, 9950, Replaces John Deere OEM number R53558, (Item #: 170292)$21.10
Pin, Pull Arm - For John Deere tractor models 4250 (Rear), 4255 (Rear), 4440 (Rear), 4450 (Rear), 4555 (Rear), Replaces John Deere OEM number AR70865, (Item #: 170307)$48.00
No Picture
Rear Drawbar Support Pin - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R65530, Used to Stabilize Swinging Drawbar, (Item #: 171607)$12.70
Straight Drawbar - For John Deere tractor models 4050, 4055, 4240, 4240S, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM number R61184SPL, Length: 45.620", Width: 3.00", Thickness: 1.500", Additional Handling and Oversize Fees Apply To This Item, (Item #: 165077)$332.00
Sway Block Support Bracket, LH, Used - For John Deere tractor models 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM nos AR96600, R64749, Replaces John Deere Casting nos R72870, Left Hand, Car III Narrow, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497633)$95.01
Sway Block Support Bracket - Right Hand, Used - For John Deere tractor models 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere OEM nos AR96599, R64750, Replaces John Deere Casting nos R72869, Right Hand, Car III Narrow, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497632)$117.01
Toplink Assembly - For John Deere tractor model 4440 (s/n 013166-earlier), Replaces John Deere OEM number RE44562, Kit includes center link end, center link body, center link handle, (Item #: 128474)$226.00
Top Link End - Measuring 8.500 inches long, with 1.375 inch -8 Left Hand UNC Thread and a 1 inch hole diameter, this part replaces John Deere part numbers AR50643. It is used on John Deere models: 2941, 2951, 3141, 3351, 3641, 3651, 4000, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Verify measurements before ordering. Some of these models used more than one size. (Item #: 110318, Ref: AR50643)$116.00
Top Link Pin - Quick Lock - For John Deere tractor models 2010, 2520, 3010, 3020, 4010, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 7200, 7210, 7400, 7410, 7510, Replaces John Deere OEM number RE56991, AR39784, AR67881, Catagory II, Quick Lock Top Link Pin, (Item #: 153787)$27.60
Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762)$5.90
Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557)$6.40
Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432)$15.80
Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360)$3.70
Engine Oil Filler Cap, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3040, 3120, 3140, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 4435, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9900, 9910, 9920, 9930, 9940, 9950, 9960, Compatible with John Deere Construction and industrial models 210, 300 (Series), 415, Compatible with John Deere Hay Cutting(s) 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM nos T20294, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498475)$10.01
Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362)$15.40
Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822)$2.90
Hydraulic Coupler Conversion Kit, Female and Male - For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 2020 (USA models only), 2030 (USA models only), 2040 (USA models only), 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3010 (For Machines Equipped with Dual Block Only), 3020, 3030 (Utility), 3130, 4000, 4010 (For Machines Equipped with Dual Block Only), 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520 (72-75), 8430 (75-78), 8440, Replaces John Deere OEM number RE12121, AR94522, RE206778, Converts John Deere remote couplers to ISO/Pioneer couplers, Includes: Rubber Caps, Style: Cartridge, Style: Lever, Body Size: 1/2", (Item #: 185490)$200.00
Hydraulic Coupler Drive Pin - For John Deere tractor models 2020, 2840, 3020, 3030 (s/n 311078-earlier), 3130 (s/n 311078-earlier), 4000 (s/n 250001-later), 4020 (s/n 250001-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 7020, Compatible with John Deere Construction and industrial models 500, 510, Replaces John Deere OEM number R46345, Threads Into Engine Pulley, Hydraulic pump coupler (2) use Item #: 111302, (Item #: 122100)$6.50
Hydraulic Lift Assist Cylinder, Used - For John Deere tractor models 4040 (Single Lift Assist), 4230 (Single or Dual Lift Assist), 4240 (Single Lift Assist), 4430 (Single or Dual Lift Assist), 4440 (Single Lift Assist), Replaces John Deere OEM nos AR97826, AR84645, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430519)$291.01
Hydraulic Pump - Splined shaft. Old fluid needs to be completely flushed-use clean new fluid. 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 1/16 inch Right Inlet, 1 1/16 inch Right Discharge. 29.5 GPM. For tractor models (4000, 4020 SN# 258410 and up), (4320 4 WD SN# 014561 and up), (4520, 4620, 4230, 4430, 4630 4 WD), 8430, 8630, (4040, 4240, 4440, 4640, 4840 4 WD), 8440, 8640, 4650, 4850. Replaces AR94661. (Item #: 112640, Ref: S.67567)$970.00
Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 1950N, 2040S, 2355N, 2650N. (Item #: 165242, Ref: AR94660)$1199.01
No Picture
Hydraulic Pump - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200413, (Item #: 115599)$1009.01
No Picture
Hydraulic Pump - For John Deere tractor models 2130, 3010 (Relief Style), 3030, 3130, 4010 (Relief Style), 4020, 4040, 4240, 4440, 5010 (Relief Style), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number AR56160, Top Inlet: 7/8", Right Inlet: -, Discharge: 7/8", Left Inlet: 1-1/16", 50cm, 3.0ci, If transitioning from non-relief to a relief style pump (3010, 4010, 5010) a line kit will be required, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200408, (Item #: 161760)$1159.01
Hydraulic Pump Drive Bushing - For John Deere tractor models 1020, 1520, 1830, 2020, 2030, 2040, 2130, 2510, 2520, 3020, 3030, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine (s) 2240, 9400, Compatible with John Deere Harvester (s) 9940, Replaces John Deere OEM number AR49427, R45822, AR34098, For Set of 4 use Item #: 111302, (Item #: 108934)$1.90
Hydraulic Pump Drive Coupler Set, Used - For John Deere tractor models 1830, 2030, 2130, 2840, 3020, 3030 (s/n 311078), 3130 (s/n 311078), 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8630, 8640, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 401C, 410, 440C, 444, 450, 500, 500A, 500B, 500C, 510, 540, 540B, 570, 600, 640, 644, 646, 670, 670A, 672A, 700, 740, 760, 762, 770A, 772A, Replaces John Deere OEM nos R34362, Set includes 2 of Part No. R34362, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414098)$15.01
Hydraulic Pump Drive Coupler, Used - For John Deere tractor models 2440 (s/n 341000-later), 2640 (s/n 341000-later), 2840, 3030 (s/n 310079-later), 3130 (s/n 310079-later), 4040 (With Power Front Wheel Drive), 4240 (With Power Front Wheel Drive), 4440 (With Power Front Wheel Drive), 4640 (With Power Front Wheel Drive), Replaces John Deere OEM nos T58194, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497109)$23.76
Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569)$15.10
Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202)$7.90
Hydraulic Pump Drive Cushion, Used - For John Deere tractor models 1040, 1640, 1840, 2040, 2040S, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 3640, 4040 (European), 4050, 4055, 4240 (European), 4250, 4255, 4350, 4440 (European), 4450, 4455, 4555, 4560, 4640 (Power Front Wheel Drive), 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8400, 8450, 8650, 8850, 9400, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 301A, 302A, 310A, 310C, 310D, 315C, 315D, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 444C, 444CH, 482C, 500C, 510, 510B, 510C, 510D, 515B, 570B, 610B, 610C, 644C, 710B, 710C, 710D, 762A, 762B, Replaces John Deere OEM number R78202, T58196, For a new version of this item use Item #: 114011, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414011)$4.71
No Picture
Hydraulic Pump Drive Pin, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Harvester(s) 9940, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 310, 380, 400, 401, 401B, 401C, 410, 440, 440C, 444, 480, 480C, 500, 500C, 510, 540, 540B, 544, 570, 600, 640, 644, 646, 670, 700, 740, 760, 762, 770, Replaces John Deere OEM number R34360, Threads Into Coupler End, For a new version of this item use Item #: 108512, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435397)$1.98
Hydraulic Pump Drive Shaft Coupler, Used - For John Deere tractor models 4040, 4240, 4430, 4440, 4630, Replaces John Deere OEM number R50215, For a new version of this item use Item #: 121444, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421444)$50.01
Hydraulic Pump, Remanufactured - For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A refundable core charge OF $300.00 will be added to your order. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Item #: 200408, Ref: AR56160-R)$1250.01
No Picture
Hydraulic Pump, Remanufactured, AR101807 - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 115599, (Item #: 200413)$1223.01
Hydraulic Pump, Remanufactured, RE20839 - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number RE20839, AR94661, R71587, Top Inlet: 7/8", Right Inlet: 1-1/16", Discharge: 1-1/16", Left Inlet: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 112640, (Item #: 200415)$1566.77
Hydraulic Pump Seal and O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Item #: 114400, Ref: RE29107)$99.33
Hydraulic Pump Seal and O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Item #: 113864, Ref: RE29103)$56.00
Hydraulic Pump, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4850, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos AR46246, AR94661, AR99839, AR70722, AR73106, Top Inlet: 7/8", Right Outlet: Plugged, Left Inlet: 1-1/16", Discharge: 1-1/16", 65cm, 4.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405068)$890.01
Hydraulic Pump, Used - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520 (Syncro and Quad Range), Replaces John Deere OEM number AR94660, R94660, Top Inlet: 7/8", Right Inlet: 1-1/16", Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 200411, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400411)$680.01
Hydraulic Pump, Used - For John Deere tractor models 2130, 3010 (Relief Style), 3030, 3130, 4010 (Relief Style), 4020, 4040, 4240, 4440, 5010 (Relief Style), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number AR56160, Top Inlet: 7/8", Right Inlet: -, Left Inlet: 1-1/16", Discharge: 7/8", 50cm, 3.0ci, If transitioning from non-relief to a relief style pump (3010, 4010, 5010) a line kit will be required, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a new version of this item use Item #: 112641, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400408)$645.00
Rockshaft Control Valve Housing Gasket - For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R67121, R57665, (Item #: 179526)$5.20
Rockshaft Control Valve Housing, Used - For John Deere tractor models 4030, 4040, 4040S, 4230, 4240, 4240S, 4350, 4430, 4440, 4455, 4630 (s/n 021798-later), Replaces John Deere OEM nos AR78507, Replaces Casting nos R63573, R66891, R66893, R71584, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446490)$570.01
Rockshaft Lift Arm, Used - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM number R41565, R51130, For a new version of this item use Item #: 172658, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498457)$165.01
Selective Control Arm, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2650 (Synchro-Transmission, European Edition), 2650N (Synchro-Transmission, European Edition), 2750, 2755, 2850 (Synchro-Transmission, European Edition), 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R50012, For a new version of this item use Item #: 115142, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435688)$22.51
Selective Control Lever Arm - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4960, Replaces John Deere OEM number R62555, (Item #: 109972)$138.00
Selective Control Valve Cover Plate - For John Deere tractor models 4030 (s/n 12618-later), 4040, 4230 (s/n 27855-later), 4240, 4350, 4430 (s/n 44905-later), 4440, 4630 (s/n 16903-later), 4640, 4840, 8430 (s/n 001741-later), 8440, 8630 (s/n 002453-later), 8640, Replaces John Deere OEM number AR73897, Replaces John Deere Casting number R60395, R65146, Casting No. R60395, R65146, (Item #: 109887)$495.00
Selective Control Valve Cover Plate, Used - For John Deere tractor models 4030 (s/n 12618-later), 4040, 4230 (s/n 27855-later), 4240, 4350, 4430 (s/n 44905-later), 4440, 4630 (s/n 16903-later), 4640, 4840, 8430 (s/n 001741-later), 8440, 8630 (s/n 002453-later), 8640, Replaces John Deere OEM number AR73899, Replaces John Deere Casting nos R60081, R60334, Casting No. R60081, R60334, For a new version of this item use Item #: 121324, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421324)$125.01
Selective Control Valve, Remanufactured, AR82561 - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82561, 3rd or 4th Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203677)$1306.01
No Picture
Selective Control Valve, Remanufactured, AR82572 - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82572, Replaces Casting number R65284, Housing Casting No. R65284, 1st or 2nd Valve, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203675)$1380.01
No Picture
Selective Control Valve, Remanufactured, AR82572 - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82572, Replaces John Deere Casting number R65284, Housing Casting No. R65284, 1st or 2nd Valve ISO Style Couplers, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203676)$1500.01
Selective Control Valve with ISO Couplers, Used - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82572, Replaces John Deere Casting nos R65284, Housing Casting No. R65284, 1st or 2nd Valve ISO Style Couplers, For a Remanufactured version of this part use Item #: 203676, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403676)$900.01
Flasher Control Switch - Used on John Deere, Case, International and Allis Chalmers equipment, this Flasher Control Switch replaces OEM numbers 71362888, 87271837, 131209C91, 131066C91, AR64422 (Item #: 150918, Ref: AR64422)$77.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250)$25.30
Light Bezel - Guide Style Light Glare Guard - 4.59" Housing - This light bezel can also replace other guide bezels when glare guard hooded bezel is desired. Compatible with John Deere Tractor(s) 2140 (sn:430000-later with Cab), 2350 (with Cab), 2355 (with Cab), 2550 (with Cab), 2555 (with Cab), 2750 (with Cab), 2755 (with Cab), 2940 (with Cab), 2950 (with Cab), 2955 (sn:765516-earlier), 3040 (sn:430000-later with Cab), 3055 (with Cab), 3140 (sn:430000-later with Cab), 3150 (with Cab), 3155 (with Cab), 3255 (with Cab), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4840 (Item #: 128284)$19.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91)$9.30
Light Switch, 4 position - 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Item #: 121802, Ref: AR48724)$22.60
Rear Light Housing - LH - On John Deere Models 1973 and later, this rear left fender tail light panel is used on Sound Guard Body and Open Station. Measures 11 1/2 inches long x 6 7/8 inches high x 1 5/8 inches deep. Used on John Deere 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (Item #: 121579, Ref: R52562)$32.00
Rear Light Housing - RH - On John Deere Models 1973 and later, this rear right fender tail light panel is used on Sound Guard Body and Open Station. Measures 11 1/2 inches long x 6 7/8 inches high x 1 5/8 inches deep. Used on John Deere 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (Item #: 121580, Ref: R52561)$31.00
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357)$18.70
Brake Valve Overhaul Kit - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 ('74 - '81), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 540, 540A, 570, 570A, 600, 670, 670A, 672A, 700A, 760, 770A, 772A, Replaces John Deere OEM number AR30687, AR31946, (Item #: 115353)$36.00
Cab Fan Motor, Used - For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8630, Replaces John Deere OEM nos AR74019, Includes Motor Fan and Housings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498774)$204.01
No Picture
Cab Foam Cowl Kit - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640, Color: Black, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112727, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112859)$214.00
No Picture
Cab Foam Cowl Kit, Brindle Brown - For John Deere tractor models 1640, 2040, 2040S, 2140, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8450, 8650, 8850, Compatible with John Deere Combine (s) 2240, Color: Brindle Brown, Kits are computer cut to assure accuracy, Cab foam spray adhesive use Item #: 112727, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112877)$213.00
Cab Foam Floor Mat, 1/2" Thick, Black - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R50761, R50762, Color: Black, Kits are computer cut to assure accuracy, 1/2" Thick durable embossed vinyl, Beveled edges, Easy to install, Lays over the existing floor, (Item #: 109458)$95.00
No Picture
Cab Foam Headliner, Vinyl, Black - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, No cut out for radio speaker, For Cab Foam Main Headliner Kit use Item #: 109453, (Item #: 176894)$251.00
No Picture
Cab Foam Kick Panel Set - For John Deere tractor models 4040, 4240, 4440, 4640, 4840, Replaces John Deere OEM number R65301, R65302, Color: Black, Made of ABS plastic, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112869)$100.00
Cab Foam Kit - 8-Piece - Black For 4040, 4240, 4440, 4640, 4840 1979-1982. (Item #: 109460, Ref: R2052)$210.00
No Picture
Cab Foam Post Kit - 4 Piece-Black. For Cab Foam Spray Adhesive order part # 0140R. For tractor models 4040, 4240, 4440, 4640. (Item #: 181978, Ref: R1229)$217.00
No Picture
Cab Foam Post Kit, Black - For John Deere tractor models 4030 (cab s/n 185707-later), 4040 (cab s/n 185707-later), 4230 (cab s/n 185707-later), 4240 (cab s/n 185707-later), 4430 (cab s/n 185707-later), 4440 (cab s/n 185707-later), 4630 (cab s/n 185707-later), 4640 (cab s/n 185707-later), 4840 (cab s/n 185707-later), Color: Black, Foam is "V" cut for a crisp fit, Kits are computer cut to assure accuracy, 5 Pieces, Includes 1 can of Spray Adhesive, For additional Spray Adhesive use Item #: 112727, Additional Handling and Oversize Fees Apply To This Item, (Item #: 121621)$95.00
Cab Foam - Quick Fit Post Kit, Black - For John Deere tractor models 4030, 4040, 4230, 4430, 4440, 4630, 4640, 4840 (all s/n 185707-earlier), Black vinyl, Pre-formed pieces snaps into place for easy installation, Kit includes 4 corner posts and silicone sealant, (Item #: 169754)$249.00
Cab Glass - Left Hand, Used - For John Deere tractor models 2140, 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955, 3140, 3150, 3155, 4030, 4040, 4050, 4230, 4240, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, Replaces John Deere OEM number R50756, A: 19", B: 22", C: 24", D: 10-1/2", For a new version of this item use Item #: 110307, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410307)$47.01
Cab Glass - Left Hand, Used - For John Deere tractor models 2140, 2350, 2550, 2750, 2940, 2950, 3140, 3150 (s/n 071269-earlier), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R50755, Sound Guard 2 Cabs, A: 25-1/2", B: 27-3/4", C: 28-1/4", Left Hand, For a new version of this item use Item #: 110122, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410122)$56.01
No Picture
Cab Glass, Lower - Right Hand, Used - For John Deere tractor models 1640 (With Sound Gaurd), 2040 (With Sound Gaurd), 2140, 2350, 2355 (s/n 691586-earlier), 2550, 2555 (s/n 691586-earlier), 2750, 2755 (s/n 691586-earlier), 2940, 2950, 2955 (s/n 691586-earlier), 3040 (With Sound Gaurd), 3140, 3150, 3155 (s/n 691586-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, Replaces John Deere OEM number R50754, For Right Hand Side, A: 19", B: 22", C: 24", D: 10-1/2", For a new version of this item use Item #: 113044, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413044)$30.00
Cab Glass - Right Hand, Used - For John Deere tractor models 1640 (SG2 Cab), 2040 (SG2 Cab), 2040S (SG2 Cab), 2140, 2350, 2550, 2750, 2940, 2950, 3040 (SG2 Cab s/n 430000-later), 3140, 3150 (s/n 071269-earlier), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R50753, Right Hand, A: 34", B: 27-3/4", C: 37", For a new version of this item use Item #: 111839, Item ships via freight carrier, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411839)$282.01
No Picture
Cab Glass Side Window Latch Set, Used - For John Deere tractor models 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (all with Sound-Gard Body), Compatible with John Deere Harvester(s) 5440, 5460, Compatible with John Deere Hay Cutting(s) 2280, Replaces John Deere OEM number RE27442, R50649, R50650, RE27441, Dramatic increase in window opening, original latches allowed 8" opening, new latches allow 19" opening, Side latches are designed to follow the contour of the cab below the window, For a new version of this item use Item #: 124078, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435838)$84.01
Cab Glass, Used - For John Deere tractor models 2140, 2350, 2355 (s/n 631621-earlier), 2550, 2555 (s/n 631621-earlier), 2750, 2755 (s/n 631621-earlier), 2940, 2950, 2955 (s/n 631621-earlier), 3140, 3150, 3155 (s/n 631621-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Replaces John Deere OEM number R50757, L31700, A: 32-3/4", B: 30", C: 36-1/4", For a new version of this item use Item #: 108919, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408919)$31.01
Cab Kick Panel Set - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R114320, R94051, R78168, R80323, Color: Brown, Made of ABS plastic, For replacement right hand use Item #: 166207, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112894)$120.00
Clutch Regulating Valve, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4640, 4840, Replaces John Deere OEM nos AT58342, Replaces Casting nos R63979, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431410)$245.01
Control Arm, Used - For John Deere tractor models 4040, 4240, 4440, Replaces John Deere OEM nos R58975, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440239)$98.01
Control Valve Cable - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4640 (all with Powershift), Replaces John Deere OEM number AR55702, 52" Total length, (Item #: 117582)$125.00
EZ Cab Kit, Black Vinyl with Formed Plastic - For John Deere tractor models 4040, 4240, 4440, 4640, 4840, Color: Black, Included Cans of Adhesive: Tube of Caulk, Material: Vinyl with Formed Plastic, (Item #: 168833)$474.00
EZ Cab Kit, Black Vinyl with Formed Plastic - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, Color: Black, Included Cans of Adhesive: Tube of Caulk, Material: Vinyl with Formed Plastic, (Item #: 168835)$499.00
Headliner, Front Piece, Black - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (Item #: 172232)$153.00
Headliner Kit - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, Replaces John Deere OEM number JDHK, 3-Piece Kit, Additional Handling and Oversize Fees Apply To This Item, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 165960)$394.00
Hydraulic Pump Support, Used - For John Deere tractor models 4040, 4040S, 4240, 4430, 4440, 4630, Replaces John Deere OEM nos R55009, R50229, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499626)$195.01
No Picture
Kick Panel, Brown - LH - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R78168, R114320, Fits Left Hand Side, For kick panel set use Item #: 166211, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166207)$78.00
Kick Panel - Brown - RH - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number R80323, R94051, Brown, For kick panel set use Item #: 166207, (Item #: 166211)$83.00
Lever and Linkage Kit - For John Deere tractor models 4040, 4240, 4440, For 2nd Valve, (Item #: 121340)$489.01
Lever and Linkage Kit - For John Deere tractor models 4040, 4240, 4440, For 3rd Valve, (Item #: 121341)$895.01
Main Headliner, Black Vinyl with Formed Plastic - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, Color: Black, Material: Vinyl with Formed Plastic, Pieces: 3, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 168834)$328.00
Manifold with Bushing - Transmission Clutch Oil - For John Deere tractor models 4240, 4430, 4440 (all powershift), Compatible with John Deere Construction and industrial models 670, 672, Replaces John Deere OEM number AR90457, (Item #: 128185)$479.00
Seal - For John Deere tractor models 2510, 2520, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R44815, (Item #: 167296)$9.98
Shifter Fork, Used - For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos AR73157, Replaces Casting nos R60336, R46464, Syncro 1st and 3rd, 6th and 8th Speed, Quad A and D Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498417)$60.01
Shifter Fork, Used - For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos AR32180, Replaces John Deere Casting nos R33399, R72600, Quad and Syncro Range, 2nd and 5th, 4th and 7th Speed, B and C Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498420)$100.01
Transmission Clutch Disc, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number AR67710, AR73183, AR73712, RE234264, AR95827, Has 22 Holes around the disc center, For a new version of this item use Item #: 127056, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499834)$20.01
Transmission Oil Filter Cover, Used - For John Deere tractor models 2520, 4000, 4020 (s/n 20100-Later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM nos R58652, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496828)$40.01
Weather Strip Door Seal - Left Hand - For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4650, 4755, 4760, 4850, 4955, 4960, 7200, 7400, 7600, 7700, 7800, Replaces John Deere OEM number R238022, RE17519, R50451, AR93828, Fits Left Hand Side, (Item #: 156591)$8.90
Weather Strip Seal - Door - For John Deere tractor models 2140, 2350, 2355 (s/n 631621-earlier), 2550, 2555 (s/n 631621-earlier), 2750, 2755 (s/n 631621-earlier), 2940, 2950, 3140, 3150, 3155 (s/n 631621-earlier), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5320, 5420, 5420 (all s/n 420001-later), 5520, 5520 (all s/n 420001-later), 7630, 7720, 7730, 7820, 7920, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200T, 8210, 8210T, 8220, 8220T, 8230, 8230T, 8295RT (all s/n 900101-907100-earlier), 8300T, 8310, 8310T, 8320, 8320RT (all s/n 900101-907100-earlier), 8320T, 8330, 8330T, 8345RT (all s/n 900101-907100-earlier), 8400T, 8410, 8410T, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9420, 9420T, 9430, 9430T, 9520, 9520T, 9530, 9530T, 9620, 9620T, 9630, 9630T, Replaces John Deere OEM number RE246465, R206158, AR52936, AR86110, RE25852, RE29728, RE51363, RE62966, RE63424, This bulb seal will fit many different areas of the cab depending on the model, Rear window may need to cut to length for some applications, Actual length: 198", (Item #: 127300)$43.00
Weather Strip Seal - Door - For John Deere tractor models 1640, 2040, 2040S, 2140, 2940, 3040, 3140, 4020 (S), 4030, 4040 (EUR), 4050, 4055, 4230, 4240 (EUR), 4240 (S), 4250, 4255, 4350, 4430, 4440 (EUR), 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8440, 8630, 8640, Replaces John Deere OEM number R58341, R112304, R52590, R56496, (Item #: 157146)$12.30
Weather Strip Seal - Door Frame - For John Deere tractor models 4040, 4240, 4440, Replaces John Deere OEM number AR85558, (Item #: 156596)$36.00
Weather Strip Seal - Door Frame - For John Deere tractor models 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, Replaces John Deere OEM number RE240206, (Item #: 156598)$23.30
Weather Strip Seal, Door Trim - For John Deere tractor models 4040 (Europe), 4040S, 4050 (s/n 011261-later), 4055, 4240 (Europe), 4240S, 4250 (s/n 011261-later), 4255, 4350, 4440 (Europe), 4450 (s/n 011261-later), 4455, 4555, 4560, 4650 (s/n 005710-later), 4755, 4760, 4850 (s/n 005710-later), 4955, 4960, Replaces John Deere OEM number RE15998, (Item #: 162775)$41.00
Weather Strip Seal - Lower Door - For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Replaces John Deere OEM number RE22488, AR85560, For Lower Cab Door, (Item #: 156594)$20.50
Weather Strip Seal, Lower Door Window - Left Hand - For John Deere tractor models 1640, 2040, 2040S, 2140, 2250 (European), 2350, 2355, 2450 (European), 2550, 2555, 2650 (European), 2750, 2755, 2850 (European), 2855N, 2940, 2950, 2955 (s/n-earlier), 3040, 3050 (European), 3055, 3140, 3150, 3155, 3255, 3350 (European), 3640 (European), 3650 (European), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number L40413, R52113, Fits Left Hand Side, Lower door weatherstrip, For Cab Glass, Door, Lower - Left Hand use Item #: 150463, (Item #: 155733)$51.00
Weather Strip Seal - Lower Front Window - Right Hand - For John Deere tractor models 1640, 2040, 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R52115, L40415, Lower front right-side weatherstrip, For Cab Glass, Lower - Right Hand use Item #: 113044, (Item #: 155730)$64.00
Weather Strip Seal - Upper Door - For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150 (BSN 017269), 3640 (BSN 017269), 4030, 4040, 4040 (S), 4050 (BSN 017297), 4230, 4240, 4240 (S), 4250 (BSN 017297), 4430, 4440, 4450 (BSN 017297), 4630, 4640, 4650 (BSN 008568), 4840, 4850 (BSN 008568), Replaces John Deere OEM number AR85559, For Upper Cab Door, For Glass Replacement use Item #: 110122, (Item #: 156593)$28.80
Weather Strip Seal, Upper Door - Right Hand - For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8450, 8650, 8850, Replaces John Deere OEM number R83716, R75761, Sound Guard Cab Weather Strip, (Item #: 156599)$31.00
Weather Strip Seal, Upper Door Window - Left Hand - For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150 (s/n 071269-earlier), 3640 (s/n 071269-earlier), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number R52114, L40414, Fits Left Hand Side, Upper door, For Cab Glass, Upper Door - Left Hand use Item #: 110122, (Item #: 155732)$67.00
Weather Strip Seal, Upper Front Window Seal - Right Hand - For John Deere tractor models 1640, 2040, 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number L40412, Windshield right-hand side weatherstrip, (Item #: 155734)$62.00
Engine Oil Cooler Cover, Used - For John Deere tractor models 4050 (Engine s/n 310362-earlier), 4440, 4630, 4640, 4650 (Engine s/n 310362-earlier), 4840, 4850 (Engine s/n 310362-earlier), 7020 (Engine s/n 335846-earlier), 8430, Compatible with John Deere Harvester(s) 5200 (Engine s/n 335846-later), 5400 (Engine s/n 335846-later), 5440, 5460, 5720 (Engine s/n 310362-earlier), 5730 (Engine s/n 310362-earlier), 5820 (Engine s/n 310362-earlier), 5830 (Engine s/n 310362-earlier), Compatible with John Deere Construction and industrial models 644C (Engine s/n 310362-earlier), 644D (Engine s/n 310362-earlier), 646C (Engine s/n 310362-earlier), 690C (Engine s/n 310362-earlier), 690CR (Engine s/n 310362-earlier), 693C (Engine s/n 310362-earlier), 740 (Engine s/n 310362-earlier), 740A (Engine s/n 310362-earlier), 743 (Engine s/n 310362-earlier), 743A (Engine s/n 310362-earlier), 762A (Engine s/n 310362-earlier), 762B (Engine s/n 310362-earlier), 770A (Engine s/n 310362-earlier), 770B (Engine s/n 310362-earlier), 770BH (Engine s/n 310362-earlier), 772A (Engine s/n 310362-earlier), 772B (Engine s/n 310362-earlier), 772BH (Engine s/n 310362-earlier), 790 (Engine s/n 310362-earlier), 790D (Engine s/n 310362-earlier), 792 (Engine s/n 310362-earlier), 850B (Engine s/n 310362-earlier), Replaces John Deere OEM nos R50421, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432387)$25.01
Engine Oil Pump, Used - For John Deere tractor models 4230, 4240, 4430, 4440, 4630, 7020, Compatible with John Deere Harvester(s) 5200, 5400, 5440, Compatible with John Deere Engine(s) 6404A, 6404T, 6466A (s/n 067685-169336), 6466D (s/n 067685-169336), 6466T (s/n 067685-169336), Replaces John Deere OEM nos AR77489, AR54558, SE500884, AR71115, AR75893, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429329)$410.01
Engine Oil Pump, Used - For John Deere tractor models 4050, 4055 (s/n 179988-later), 4240, 4250, 4255 (s/n 179988-later), 4440, 4450, 4455 (s/n 179988-later), 4555 (s/n 179988-later), 4560 (s/n 179988-later), 4640, 4650, 4755 (s/n 179988-later), 4760 (s/n 179988-later), 4840, 4850, 4955 (s/n 179988-later), 4960 (s/n 179988-later), 6030, 7520, 7710 (s/n 089999-earlier), 7720, 7810 (s/n 089999-earlier), 7820, 7920, 8100 (s/n 010000-later), 8100T, 8110, 8110T, 8120, 8120T, 8200 (s/n 010000-later), 8200T, 8210, 8210T, 8220, 8220T, 8300 (s/n 010000-later), 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560 (s/n 499999-earlier), 8630, 8640, 8650, 8760, 8770, 8870, 9100, 9120, 9220, 9320, 9420, 9520, 9620, Compatible with John Deere Combine(s) CTS (s/n 068887-070122, 070231-071384), CTSII, 1177, 1188, 1188H4, 2256, 2258, 2264 (s/n 068584-later), 2266 (s/n 068584-later), 6620, 6622, 7720, 8820, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9610, 9650, 9650 (s/n 117211-earlier), 9650 CTS (s/n 117211-earlier), 9750, 9780 (s/n 071443-072697), 9780 CTS (s/n 072800-later), Compatible with John Deere Harvester(s) 1470, 3510 (NW s/n 060036-earler), 5200, 5400, 5460, 5720, 5730, 5820, 5830 (s/n 058575-later), 6610, 6650, 6710, 7200, 7300, 7400, 7500, 9960 (s/n 499999-earlier), 9970, 9976, 9986, 9996, Compatible with John Deere Construction and industrial models 330 (LC), 370, 450 (LC), 530B (s/n 017001-later), 535, 540E, 548E, 560D, 640E, 644B, 644C, 644D, 644E, 644ER, 644G, 644H, 646, 646B, 646C, 648E, 660D, 690C, 693C, 740 (G), 740A, 740E, 743A, 744 (s/n 499999-earlier), 744 (E), 748E, 762, 762A, 762B, 770, 770A, 770AH, 770B (s/n 499999-earlier), 770BH (s/n 499999-earlier), 770C (s/n 582129-earlier), 770CH (s/n 582129-earlier), 772A, 772AH, 772B (s/n 499999-earlier), 772BH (s/n 499999-earlier), 772CH (s/n 582129-earlier), 790, 790D, 792, 844, 848G, 850, 850B, 850C, 850C (s/n 883331-earlier), 850CII (s/n 883332-later), 855, 860B, 862, 890, 890A, 892, 990, 992 (s/n 061566-499999), 1710D (s/n 001000-earlier), 1711D (s/n 001000-earlier), Compatible with John Deere Engine(s) 6076 (s/n 499999-earlier), 6076A (s/n 180071-499999), 6101, 6466A, 6466D, 6466T, 6619A, 6619T, Compatible with John Deere Sprayer(s) 4920, Replaces John Deere OEM number RE60622, AR96190, AR99339, AR99341, RE44118, RE507076, SE500877, SE501063, Replaces John Deere Casting nos R62946, R504028, R124328, Crankshaft Driven, This Pump Requires Oil Intake Tube No. RE42653, Not Included, For a new version of this item use Item #: 114697, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414697)$88.01
Hydraulic Oil Cooler - For John Deere tractor models 4240, 4440, 4640, Replaces John Deere OEM number AR80128, Core Height: 22", Core Width: 20 1/2", Depth: 1 1/2", (Item #: 128209)$1634.11
John Deere, AR73905, R60401, Used - For John Deere tractor models 4030 (s/n 012618-later), 4040, 4230 (s/n 027855-later), 4240, 4430 (s/n 044905-later), 4440, 4630 (s/n 016903-later), 4640, 8430 (s/n 001741-later), 8440, 8630 (s/n 002453-later), 8640, Replaces John Deere OEM nos AR73905, Replaces John Deere Casting nos R60401, R60402, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442520)$170.01
Oil Cooler - For John Deere tractor models 4040, 4040S, 4240, 4240S, 4440, Replaces John Deere OEM number AR86211, AMAR86211, Core Height: 12", Core Width: 16.3", Core Thickness: 1-3/4", Made in the USA and manufactured to exact OEM specifications, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158315)$880.00
No Picture
Oil Cooler - For John Deere tractor models 4240, 4440, 4640, Replaces John Deere OEM number AR80128, Made in the USA and manufactured to exact OEM specifications, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158325)$1429.01
Oil Cooler Bypass Housing, Used - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8650, 8760, 8960, Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820, 9500, 9600, Compatible with John Deere Harvester(s) 5720, 5730, 9940, 9950, 9960, Replaces John Deere OEM nos R78134, Replaces Casting nos R62954, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498742)$55.01
Oil Cooler Bypass Valve and Housing, Used - For John Deere tractor models 4230, 4240, 4430, 4440, 4630, 4640, 4840, 7020, 8430, 8440, Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 9940, Replaces John Deere OEM nos R50384, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498371)$50.01
Oil Cooler O-Ring - For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7800, 8100, 8300, 8430, 8440, 8450, Compatible with John Deere Combine (s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9600, Compatible with John Deere Harvester (s) 5440, 5460, 5720, 5730, 9940, 9950, 9960, 9965, Compatible with John Deere Construction and industrial models 600, 644, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 690, 690A, 690B, 690C, 693C, 740, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 770A, 770B, 770BH, 772B, 772BH, 790D, 792D, 792LC, 850B, 850C, 892E, 892LC, Replaces John Deere OEM number R47153, R50420, Inside Diameter: .984", Nominal Section: .139", Standard Number Size: 214, Durometer: 65, Material: H4P, (Item #: 167363)$1.70
Oil Cooler, Used - For John Deere tractor models 4050, 4250, 4440, 4450, 4630, 4640, 4650 (Engine s/n 336698-earlier), 4840, 4850 (Engine s/n 336698-earlier), 7020, 8430, 8440, 8450, Compatible with John Deere Combine(s) 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 9940, 9950, Compatible with John Deere Construction and industrial models 444 (Engine s/n 263265-later), 544 (Engine s/n 165808-earlier), 544A (Engine s/n 165808-earlier), 644A (Engine s/n 164553-earlier), 644C (Engine s/n 336698-earlier), 644D (Engine s/n 336698-earlier), 644E (Engine s/n 100664-earlier), 646C (Engine s/n 336698-earlier), 690C (Engine s/n 336698-earlier), 690DR, 693C (Engine s/n 336698-earlier), 740, 740A (Engine s/n 336698-earlier), 743, 743A (Engine s/n 336698-earlier), 762A (Engine s/n 336698-earlier), 762B (Engine s/n 336698-earlier), 770A (Engine s/n 336698-earlier), 770AH (Engine s/n 336698-earlier), 770B (Engine s/n 336698-earlier), 770BH (Engine s/n 336698-earlier), 772 (Engine s/n 336698-earlier), 772A (Engine s/n 336698-earlier), 772AH (Engine s/n 336698-earlier), 772BH (Engine s/n 336698-earlier), 790 (Engine s/n 336698-earlier), 790D (Engine s/n 336698-earlier), 792 (Engine s/n 336698-earlier), 850B (Engine s/n 336698-earlier), 892 (Engine s/n 336698-earlier), Replaces John Deere OEM number AT25038, 12 Plates, For a new version of this item use Item #: 124572, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 424572)$50.01
Oil Pump Drive Gear and Shaft - For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 4840, 7020 (late), 8430 (1974-1981, 4WD), 8440, 8640, Compatible with John Deere Combine (s) 985, 1085 (s/n 041200-earlier), 6600 (s/n 156500-later), 6602 (s/n 1500-later), 6620, 6622 (early), 7700 (s/n 8000-later), 7720 (early), 8820 (early), Compatible with John Deere Harvester (s) 5200 (late), 5400, 5420, 5440, 5460, 9940 (early), Compatible with John Deere Construction and industrial models 644A, 646, 646B (early), 690, 690A, 690B, 693B, 740, 740A (early), 743, 743A (early), Compatible with John Deere Engine (s) 6404A (R 01, 02, 14, 15 (7020), 6404A (R 10, 11, 12, 13 (4630), 6404T (R 07, 09, 16, 17 (4430), 6466A (s/n 067685-later), 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM number R64568, Includes gear and shaft, (Item #: 157574)$146.00
Oil Pump Housing, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8640, Compatible with John Deere Combine(s) 985, 1085, 6600, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 9940, Compatible with John Deere Construction and industrial models 690B, 693B, 740, 740A, 743, 743A, Compatible with John Deere Engine(s) 6404T, 6466A, 6466D (s/n 067685-later), 6466T (s/n 067685-later), Replaces John Deere OEM nos AR69108, Replaces Casting nos R57556, R50377, R56607, R59033, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434455)$194.01
Transmission Oil Filter Cover, Used - For John Deere tractor models 2520, 3800, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4955, 4960, 5010, 5020, 6030, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R63093, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498814)$65.01
PTO / Driveline
Alternator Bracket, Used - For John Deere tractor models 4240 (s/n 081569-later), 4440 (s/n 081569-later), 4640 (s/n 081569-later), 4840 (s/n 081569-later), 8430 (s/n 081569-later), 8440 (s/n 081569-later), Compatible with John Deere Combine(s) 8820, Compatible with John Deere Harvester(s) 5720, 5730, 9940, Replaces John Deere OEM nos R69636, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430768)$89.01
Needle Bearing - For John Deere tractor models 1020, 1520, 2020, 2030, 2440 (s/n: 340999-earlier), 2510, 2520, 2630, 2640 (s/n: 340999-earlier), 3020, 4000, 4020, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 440, 440A, 440B, 500, 500A, 500B, 510, 540, 540A, 600, 644B, 644C, 646C, 760A, Compatible with John Deere Lawn and Garden (s) 110 (s/n: 3571-earlier), 110 (H, s/n: 3571-earlier), Replaces John Deere OEM number 368372R91, A57046, G13604, 18-693, 142090, 18-1643, (Item #: 176563)$3.24
No Picture
PTO Clutch Disc, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4430 (s/n 044989-later), 4440, 4450, 4455, 4555, 4560, 4630 (s/n 016988-later), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6410, 6415, 6420, 6500, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700 (s/n 043124-earlier), 7710, 7720, 7800, 7810, 7820, 7920, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number RE23286, AR94517, RE234261, RE65291, For a new version of this item use Item #: 117031, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448587)$10.01
PTO Clutch Disc, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, Replaces John Deere OEM number AR60082, AR17420, RE234306, Does Not Have 22 Holes around the disc center like Transmission Clutch Disc 499834, For a new version of this item use Item #: 127049, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497939)$32.01
PTO Clutch Plate, Used - For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R57330, Quad and Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433808)$225.01
PTO Countershaft, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R33852, 540-1000 RPM Independent PTO, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497636)$25.01
PTO Drive Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R50498, Teeth: 37, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498501)$165.01
PTO Drive Gear, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR61680, Replaces John Deere Casting nos R50828, Teeth:90, Splines:23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498505)$348.01
PTO Drive Reduction Gear - This 540 Rpm PTO Drive Gear fits John Deere Models: 2840, (3020 serial number 123000 and up), 4000, (4020 serial number 201000 and up), 4030, 4040, 4050, (4055, 4255, 4440, 4450, 4455 all QUAD and POWER SHIFT), 4230, 4240, 4250, (4320 SYNCRO), 4430; Replaces John Deere Part Number R42014 (Item #: 121745, Ref: R42014)$254.00
PTO Drive Shaft, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Compatible with John Deere Hay Cutting(s) 2250 (Hydrostatic Drive Windrowers), 2270 (Hydrostatic Drive Windrowers), Replaces John Deere OEM nos AR54963, Replaces Casting nos R50861, Teeth: 41, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498434)$321.01
PTO Gear, Used - For John Deere tractor models 600, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A, 500B, 500C, Replaces John Deere OEM number R42014, 31 Teeth, 540 and 1000 RPM, For a new version of this item use Item #: 121745, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499628)$150.01
PTO Gear, Used - For John Deere tractor models 600, 2840, 3020, 3030, 3120, 3130, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, Compatible with John Deere Construction and industrial models 500, 500B, 500C, Replaces John Deere OEM number R33339, Teeth: 16 and 23, 540 and 1000 RPM, For a new version of this item use Item #: 121744, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499630)$95.01
PTO Guide, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1640, 1830, 2020, 2030, 2040, 2040S, 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2400, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3120, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000, 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R45126, R38220, 16 Drive Splines, For a new version of this item use Item #: 121740, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421740)$40.01
PTO Idler Gear - Lower, Used - For John Deere tractor models 4040, 4240, 4440, Replaces John Deere OEM nos R64028, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433830)$100.01
PTO Idler Gear, Used - For John Deere tractor models 4040, 4240, 4440, Replaces John Deere OEM nos R64027, Teeth: 29, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433829)$105.01
PTO Operating Retainer, Used - For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR56116, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434570)$48.01
PTO Powershift Drive Shaft, Used - For John Deere tractor models 4240, 4440, Replaces John Deere OEM nos R64030, Splines: 38, Teeth: 17, Diameter: 4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433459)$291.01
PTO Quill, Used - For John Deere tractor models 4040, 4040S, 4050, 4055 (s/n 024477-earlier), 4240, 4240S, 4250, 4255 (s/n 024477-earlier), 4350, 4440, 4450, 4455, 4455 (s/n 024477-earlier), Replaces John Deere OEM nos AR81467, Replaces Casting nos R47507, Casting Numbers need to match when selling, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498492)$125.01
PTO Rear Drive Shaft, Used - For John Deere tractor models 2510, 2520, 2840, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, Replaces John Deere OEM number R38224, R80744, R94130, Length: 11.840", This is a 540 RPM Shaft to replace the 1000 RPM standard shaft, Splines: 6 and 21, For a new version of this item use Item #: 121487, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421487)$89.40
PTO Shaft - 1000 RPM, Used - For John Deere tractor models 600, 2510, 2520, 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 500A (s/n 123114-152141), 500B, 500C, Replaces John Deere OEM number R38224, R94130, R80744, 10.875" Long, 21 Spline, 1000 rpm, Bearing Surface Diameter: 2", For a new version of this item use Item #: 108935, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408935)$55.01
PTO Shaft - 540 RPM, Used - For John Deere tractor models 2510 (s/n 010491-later), 2520, 2840, 3020, 4000, 4020, 4040, 4050, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number AR41752, Bushing [JD7557] Not Included, Center surface Diameter: 2", For a new version of this item use Item #: 108507, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408507)$58.01
PTO Shaft Guard / Cover, Used - For John Deere tractor models 820, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1250, 1450, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4630, 5320, 5325, 5400, 5420, 5425, 5500, 5520, 5525, 5615, 5715, 6030, 6110, 6120, 6210, 6215, 6220, 6310, 6320, 6410, 6415, 6420, 7220, 7320, 7420, 7520, 7600, 7630, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9410, 9520, 9620, Replaces John Deere OEM nos AR26782, L64456, Rear Shaft Guard, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499115)$17.76
PTO Shield, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2950, 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos R69628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425219)$60.01
Transmission and PTO Clutch Plate, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230 (s/n 027566-later), 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, Replaces John Deere OEM number R61066, R51800, R59689, I.D.: 6.940", For a new version of this item use Item #: 127098, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435915)$52.01
Seats
Bottom Seat Cushion - Bottom seat cushion, brown cloth, made to fit Personal Posture Seat. Heavy Duty Fabric On High Density Foam, Steel Back for Mechanical Suspension. Replaces John Deere Part Number AR76515 (Item #: 101296, Ref: AR76515)$110.00
Seat Bottom - New John Deere replacement bottom cushion, steel base, heavy duty fabric on high density foam. For hydraulic suspension seats. Replaces AR82944, RE163027, RE188578 (Item #: 112495, Ref: AR82944)$154.00
Seat Cushion, Back - This is a brand new original fabric personal posture back cushion with steel back for hydraulic or mechanical seats with five position lumbar support . It fits multiple John Deere models. It does not contain brackets or hardware. Replaces John Deere part numbers RE12049, AR71107 (Item #: 101297, Ref: AR71107)$136.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1)$2.30
Sheet Metal / Body Parts
4th Step - For John Deere tractor models 2840, 2950, 2955, 3010, 3020, 3040, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 109570)$96.00
4th Step Kit - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, With rubber side plate, Step is 15" x 6", For use with step kits 108121 or 108122, Comes primered (color may vary). Prior to painting check fitment, (Item #: 150801)$114.00
Cab Door - No longer available. (Item #: 108522, Ref: AR73256)$422.87
Cab Kit, 10 Piece - For 11" wide seat base. Cab kit (without headliner), black 10-piece set - fits: (4030, 4230, 4430, 4630 - all with 11" wide seat base), 4040, 4240, 4440, 4640, 4840 (cab SN# to 185706). Restore your tractor to NEW condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109460, Ref: CKJD40-10)$210.00
Cab Kit, 8 Piece - Cab kit (without headliner), black 8-piece set fits: 4040, 4240, 4440, 4640, 4840 (SN# 185707 and up). Restore your tractor to "NEW" condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 110247, Ref: CKJD40-8)$258.00
Cab Post Kit - These are items that are not included in the cab kits. Fits 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Item #: 1047880, Ref: CPKJD40)$110.00
Cab Roof - For 2350, 2850, 2950, 2955, 3155, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4430, 4440, 4450, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8640. Cab Roof is Green Gell-Coat Finish, without Pre-Cut Marker Light Holes. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 114020, Ref: AR74143)$310.00
Combine Convex Mirror Head, Round, Pivot Post, 8-1/2" - For John Deere tractor models 2355, 2555, 2755, 2855N, 2955, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 4960, 6030, 8430, 8450, 8630, 8650, 8850, Compatible with John Deere Combine (s) 3300, 4400, 4420, 6600, 6600 SH, 6602, 6620, 6622, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 3950, 3955, 3970, 3975, Compatible with John Deere Baler (s) 100, 330, 335, 375, 385, 435, 446, 447, 456, 457, 466, 467, 530, 535, 546, 547, 556, 557, 566, 567, Replaces John Deere OEM number AH99408, 8-1/2" Round Mirror, (Item #: 115355)$21.30
Cover - Transmission / Rockshaft / Selective Control Valve - For John Deere tractor models 2520, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number R41446, (Item #: 167450)$118.00
Cowl, Used - For John Deere tractor models 3055 (With 4 Post Canopy), 3150 (With 4 Post Canopy), 3155 (With 4 Post Canopy), 3255 (With 4 Post Canopy), 4030 (With 4 Post Canopy), 4040, 4050 (With 4 Post Canopy), 4055 (Without Sound Guard Cab), 4230 (Without Sound Guard Cab), 4240, 4250 (With 4 Post Canopy), 4255 (Without Sound Guard Cab), 4430 (Without Sound Guard Cab), 4440, 4450 (With 4 Post Canopy), 4455 (Without Sound Guard Cab), 4555 (With 4 Post Canopy), 4560 (With 4 Post Canopy), 4640, 4650 (With 4 Post Canopy), 4755 (With 4 Post Canopy), 4760 (With 4 Post Canopy), 4850, 4850 (With 4 Post Canopy), 4955 (With 4 Post Canopy), 4960 (With 4 Post Canopy), 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R65774, R52519, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429642)$112.01
Cowl, Used - For John Deere tractor models 3055 (With 4 Post Canopy), 3150 (With 4 Post Canopy), 3155 (With 4 Post Canopy), 3255 (With 4 Post Canopy), 4030 (With 4 Post Canopy), 4040, 4050 (With 4 Post Canopy), 4055 (Without Sound Guard Cab), 4230 (Without Sound Guard Cab), 4240, 4250 (With 4 Post Canopy), 4255 (Without Sound Guard Cab), 4430 (Without Sound Guard Cab), 4440, 4450 (With 4 Post Canopy), 4455 (Without Sound Guard Cab), 4555 (With 4 Post Canopy), 4560 (With 4 Post Canopy), 4640, 4650 (With 4 Post Canopy), 4755 (With 4 Post Canopy), 4760 (With 4 Post Canopy), 4850, 4850 (With 4 Post Canopy), 4955 (With 4 Post Canopy), 4960 (With 4 Post Canopy), 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R65775, R52520, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429643)$112.01
Fender, Left Hand - This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87732, RE14987 (Item #: 103954, Ref: RE11220)$250.00
Fender Light Panel - Rear, Left Hand, Used - For John Deere tractor models 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Replaces John Deere OEM number R52562, Fits Left Hand Side, For a new version of this item use Item #: 121579, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421579)$16.01
No Picture
Fender Light Panel, Rear - Right Hand, Used - For John Deere tractor models 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Replaces John Deere OEM number R52561, Fits Right Hand Side, For a new version of this item use Item #: 121580, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421580)$16.01
Fender, Right Hand - This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87731, RE14981 (Item #: 103953, Ref: RE11219)$250.00
Frame Rail - LH, Used - For John Deere tractor models 4240, 4430, 4440, 4630, Replaces John Deere OEM number R60580, R52700, Left Hand, For a new version of this item use Item #: 103863, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403863)$184.01
Frame Rail - Right Hand, Used - For John Deere tractor models 4240, 4430, 4440, 4630, Replaces John Deere OEM number R60579, R52699, Fits Right Hand Side, For a new version of this item use Item #: 103862, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403862)$210.01
Front Fender with Step - For John Deere tractor models 3010, 3020, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7700, 7710, 7800, 7810, Front Fender Pair, Stops Mud and Rocks, Protects Cab and Windshield, Durable Polyethylene Plastic, Impact Resistant, Durable In Extreme Conditions, 13" Fender, For Tires 9", 10", 11", This has a custom made bracket to fit your tractor, may be up to a 4 week lead time, (Item #: 123333)$1139.01
Handrail - Left Hand - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Easy to install with no holes to drill, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step Kit use Item #: 109395, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108968)$67.00
No Picture
Headliner Kit, Black - For tractor models 2840, 2940, (30 series with sound guard cab SN# up to 205843), 3040, 3640, (40 series with sound guard cab SN# up to 185706), 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Item #: 109453, Ref: K64400)$225.00
Instrument Dash Panel - This Instrument Panel is for Tilt / Telescopic steering column. It is used on 2 wheel drive tractors. 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8630. Replaces John Deere OEM nos R61339, R50476, R55993 (Item #: 133345)$170.00
No Picture
Mirror, Telescoping Arm Only, Left Hand, Outer - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5225, 5320, 5325, 5420, 5520, 6030, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6320 (Europe), 6400, 6403, 6403 (Mexico, South Africa, Asia), 6405, 6410, 6415, 6420, 6420 (Europe), 6420S (Europe), 6500, 6603, 6603 (Mexico, South Africa, Asia), 6605, 6615, 6715, 7220, 7320, 7420, 7520, 7600, 7610 (s/n 089999-earlier), 7700, 7710 (s/n 089999-earlier), 7710 (s/n 090000-later), 7800, 7810 (s/n 089999-earlier), 7810 (s/n 090000-later), 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type), Compatible with John Deere Baler (s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler), Replaces John Deere OEM number AL77483, Does not include mirror, For Complete LH Mirror Assembly use Item #: 115375, (Item #: 170033)$131.00
No Picture
Mirror, Telescoping Arm Only, Right Hand, Outer - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 6030, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6320 (Europe), 6320, 6400, 6403, 6403 (Mexico, South Africa, Asia), 6405, 6415, 6420 (Europe), 6420, 6420S (Europe), 6500, 6603, 6603 (Mexico, South Africa, Asia), 6605, 6615, 6715, 7220, 7320, 7420, 7520, 7600, 7610 (s/n 089999-earlier), 7700, 7710, 7800, 7810, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type), Compatible with John Deere Baler (s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler), Replaces John Deere OEM number AL77484, For Mirror Head Only use Item #: 170033, (Item #: 170041)$147.00
Rear Side Panel - Left Hand, Used - For John Deere tractor models 4050 (late), 4055, 4250, 4255, 4440, 4450, 4455, Replaces John Deere OEM number AR81380, Fits Left Hand Side, For a new version of this item use Item #: 101963, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401963)$44.01
No Picture
Rear Side Shield - Left Hand For 4050 (From S#5511), 4055, 4250, 4255, 4440, 4450, 4455. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101963, Ref: R1544)$74.00
No Picture
Rear Side Shield - Right Hand For 4050 (From S#5511), 4055, 4250, 4255, 4440, 4450, 4455, 4630. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101962, Ref: R1545)$74.00
Side Screen - Side grill panel, 26-1/4x22-3/4. For tractors: 4240, 4430. Replaces AR55022. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101939, Ref: TP-AR65461)$111.00
No Picture
Side Screen - Side grill panel, 32-1/4x24-3/4. For tractors: 4840. For 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101940, Ref: AR73911)$124.00
No Picture
Side Screen - 26 1/4 x 24 3/4 For 4440, 4630, 4640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101939, Ref: R0334)$111.00
Side Screen Spring - For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8450 (s/n 003126-earlier), 8630, 8640, 8650 (s/n 004597-earlier), Compatible with John Deere Construction and industrial models 700A, Replaces John Deere OEM number R35769, (Item #: 122694)$5.60
Side Screen Spring, Used - For John Deere tractor models 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8450 (s/n 003126-earlier), 8630, 8640, 8650 (s/n 004597-earlier), Compatible with John Deere Construction and industrial models 700, Replaces John Deere OEM number R35769, For a new version of this item use Item #: 122694, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422694)$3.48
No Picture
Side Shield, LH - For tractor models (4050 SN# 005511 and up), 4055, 4250, 4255, 4440, 4450, 4455. (Item #: 101963, Ref: AR81380)$74.00
No Picture
Side Shield, RH - For tractor models (4050 SN# 005511 and up), 4055, 4250, 4255, 4440, 4450, 4455. (Item #: 101962, Ref: AR82256)$74.00
No Picture
Step - For John Deere tractor models 2950, 3030, 3040, 3130, 3140, 3150, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4760, 4840, 4850, 4955, 4960, Durable powder coat finish, matches original equipment color, Convenient and easy access when fueling or servicing your tractor, Easy to install with no holes to drill, Hardware is included, Step: 20" wide 7" deep, Additional Handling and Oversize Fees Apply To This Item, (Item #: 110548)$120.00
Step Kit - Left Hand - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955 (row crop and utility tractors), Open tread design for better slip resistance, Kit includes: handrail, steps, side panels, and mounting bracket, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, To Create a 4th Step use Item #: 150801, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108121)$265.00
Step Unit - John Deere 30-50 Series Open Station Series Step - For John Deere tractor models 2840 (Open station), 2950 (Open station), 2955 (Open station), 3030 (Open station), 3040 (Open station), 3130 (Open station), 3140 (Open station), 3150 (Open station), 4030 (Open station), 4040 (Open station), 4050 (Open station), 4230 (Open station), 4240 (Open station), 4250 (Open station), 4430 (Open station), 4440 (Open station), 4450 (Open station), 4630 (Open station), 4640 (Open station), 4650 (Open station), 4840 (Open station), 4850 (Open station), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Made in the USA, Left Hand Rail use Item #: 109570, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114452)$375.00
Step Unit - Left Hand - For John Deere tractor models 2420 (Open station row crop and will require adapter bracket), 2510 (Open station row crop and will require adapter bracket), 2520 (Open station row crop and will require adapter bracket), 2950, 3010 (Open station row crop and will require adapter bracket), 3020 (Open station row crop and will require adapter bracket), 3030, 3040, 3130, 3140, 3150, 3155, 4000 (Open station row crop and will require adapter bracket), 4010 (Open station row crop and will require adapter bracket), 4020 (Open station row crop and will require adapter bracket), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4260, 4320 (Open station row crop and will require adapter bracket), 4350, 4430, 4440, 4450, 4455, 4520 (Open station row crop and will require adapter bracket), 4555, 4560, 4620 (Open station row crop and will require adapter bracket), 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all other with Sound Guard cab), Fits left hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Handrail shown is sold separately, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 113386)$190.00
No Picture
Suitcase Weight, Used - For John Deere tractor models AI, 2840, 2940, 3040, 3140, 3340, 3540, 3640, 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5045, 5045D, 5045E, 5055D, 5055E, 5065M, 5070M, 5075E, 5075M, 5080M, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101EN, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5205, 5210, 5220, 5225, 5300, 5310, 5320, 5320N, 5325, 5325N, 5400, 5410, 5420, 5420N, 5425, 5425N, 5500, 5510, 5520, 5520N, 5525, 5525N, 5603, 5625, 6100D, 6105D, 6105M, 6105R, 6110, 6110D, 6110L, 6115D, 6115M, 6115R, 6120, 6120L, 6125D, 6125M, 6125R, 6130D, 6130R, 6140D, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6200, 6210, 6210L, 6210R, 6215, 6220, 6220L, 6230, 6300, 6310, 6310L, 6320, 6320L, 6330, 6400, 6403, 6405, 6410, 6410L, 6415, 6420, 6420L, 6430, 6500, 6520L, 6603, 6605, 6615, 6715, 7130, 7200, 7200R, 7210, 7210R, 7215R, 7220, 7230, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7320, 7330, 7400, 7405, 7410, 7420, 7430, 7520, 7530, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8120T, 8130, 8200, 8210, 8220, 8220T, 8225R, 8230, 8230T, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8300, 8310, 8310R, 8310RT, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8400, 8410, 8420, 8420T, 8430, 8430T, 8450, 8520, 8520T, 8530, 8560, 8650, 8760, 8850, 8960, 9100, 9120, 9200, 9220, 9230, 9300, 9320, 9320T, 9330, 9360R, 9370R, 9400, 9400T, 9410R, 9420, 9420R, 9420T, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9510R, 9510RT, 9520, 9520R, 9520RT, 9520T, 9530, 9530T, 9560R, 9560RT, 9620, 9620T, 9630, 9630T, Replaces John Deere OEM number R127764, Replaces John Deere Casting nos BW654, Aftermarket, For a new version of this item use Item #: 119702, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463812)$115.01
Suitcase Weight, Used - For John Deere tractor models 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5225, 5303, 5325, 5415, 5425, 5525, Replaces John Deere OEM number R58823, Marked R58823, 1 1/2 in. Thick, 100 lbs, For a new version of this item use Item #: 119704, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 419704)$125.01
No Picture
Swivel Step Unit - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, Will not fit open station tractors, Convenient adjustable step unit makes it easier to get in and out of your tractor especially for tractors with front wheel assist or with loaders on them, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109395)$430.00
Tractor Mirror Assembly w/Arm and Mounting Bracket, 9" x 16" Mirror - Right Hand - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4720, 4755, 4760, 4840, 4850, 4955, 4960, 5085M, 5095M, 5101, 5105, 5200, 5210, 5225, 5300, 5310, 5320, 5325, 5400, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5603, 5625, 6030, 6100, 6110, 6115D, 6140D, 6200, 6210, 6215, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6415, 6420, 6430, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7420, 7430, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8345R, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8530, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9330, 9400, 9420, 9430, 9520, 9530, 9620, 9630, Replaces John Deere OEM number RE151162, Fits Right Hand Side, Kit includes: 1 right angle bracket with bolts, nuts and washers to mount mirror arm to the angle bracket and 5/8" bolts and spacer washers, For LH Mirror w/Arm and Mounting Bracket use Item #: 117468, (Item #: 160825)$190.00
Tractor Mirror Assembly with Arm and Mounting Bracket - Left Hand - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4720, 4755, 4760, 4840, 4850, 4955, 4960, 5085M, 5095M, 5101, 5105, 5200, 5210, 5225, 5300, 5310, 5320, 5325, 5400, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5603, 5625, 6030, 6100, 6110, 6115D, 6140D, 6200, 6210, 6215, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6415, 6420, 6430, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7420, 7430, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8345R, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8530, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9330, 9400, 9420, 9430, 9520, 9530, 9620, 9630 (All Sound with Guard Cabs), Replaces John Deere OEM number RE151161, Fits Left Hand Side, Kit includes: 1 right angle bracket with bolts, nuts and washers to mount mirror arm to the angle bracket and 5/8" bolts and spacer washers, For RH Mirror w/Arm and Mounting Bracket use Item #: 160825, (Item #: 117468)$190.00
Tractor Mirror Assembly with Extendable Arms - For John Deere tractor models 2140, 2350, 2355, 2550, 2750, 2755, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6030, 8430, 8440, 8450, 8630, 8640, 8650, 8850, 9100, Replaces John Deere OEM number RE151162, RE151161, Mirror kit designed specifically for the John Deere Sound Gard tractors, Fits Left Hand and Right Hand Side, Kit includes: (2) 9" x 16" mirrors, (2) two hole extension arms, (2) interface brackets, (2) roof cab mounting bolts, Extends 21" to 31", Requires no drilling or cutting, Hardware included, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119925)$310.00
No Picture
Tractor Mirror Assembly with Retractable Arm - Right and Left Hand, Used - For John Deere tractor models 1030, 1040, 1050, 1130, 1140, 1250, 1450, 1530, 1630, 1640, 1650, 1830, 1840, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (Fits tractors with Sound-Gard cabs only), Replaces John Deere OEM number AL78021, AL77484, Fits Left Hand or Right Hand Side, Kit includes 8" x 11" wide-angle convex mirror head, Mirror length from cab frame to mirror head is 22"-36", Easily adjustable and extendable 14", 8" x 11" Mirror, Sound-Guard, For a new version of this item use Item #: 109591, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435450)$101.01
Tractor Mirror Assembly with Retractable Arm, Right Hand or Left Hand - For John Deere tractor models 1030, 1040, 1050, 1130, 1140, 1250, 1450, 1530, 1630, 1640, 1650, 1830, 1840, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (Fits tractors with Sound-Gard cabs only), Replaces John Deere OEM number AL78021, AL77484, Fits Left Hand or Right Hand Side, Kit includes 8" x 11" wide-angle convex mirror head, Mirror length from cab frame to mirror head is 22"-36", Easily adjustable and extendable 14", Powder coat finish, All hardware included, Detailed installation instructions included, (Item #: 109591)$210.00
Axle Knee Extension, Left Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces AR80193, AR59194, Casting numbers R64388, R49608 (Item #: 173486, Ref: AR80193)$649.00
Axle Knee Extension, Right Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces R80192, AR59194, AR59214, Casting numbers R64387, R49607, R53221 (Item #: 173494, Ref: AR80192)$675.00
Axle Knee - Left Hand, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number AR80193, Replaces Casting nos R64388, R49608, Left Hand, Regular Adjustable, 2 5/8" Thick, For a new version of this item use Item #: 496744, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430530)$360.01
Axle Knee, Left Hand, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Compatible with John Deere Harvester(s) 7455, 9920, 9930, Replaces John Deere OEM number AR59213, Replaces Casting nos R49565, Left Hand, Wide Axle, For Axle Knee, Right Hand use Item #: 497105, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497104)$291.01
No Picture
Axle Knee, Right Hand, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Compatible with John Deere Harvester(s) 7445, 9920, 9930, Replaces John Deere OEM number AR59212, Replaces Casting nos R49564, Right Hand, Wide Axle, For Axle Knee Left Hand use Item #: 497104, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497105)$291.01
Axle Shaft, Used - For John Deere tractor models 4000 (s/n 201000-later), 4020, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4430, 4440, 4450, 7520, Replaces John Deere OEM nos R60076, Axle Length: 36 29/32", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498964)$360.01
Center Steering Arm - For tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Center Steering Arm replaces R50769. (Item #: 104965, Ref: R61159)$186.00
Center Steering Arm, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R61159, R50769, For a new version of this item use Item #: 104965, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404965)$66.01
Differential Assembly, Used - For John Deere tractor models 4430, 4440, Replaces John Deere OEM nos AR101618, 4 Pinion Differential Assy, Quad Range and Syncro Range, Housing Marked R64102, Cover Marked R56950 or R68939, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499620)$890.01
Differential Hub, Used - For John Deere tractor models 4050, 4055, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7520, 7600 (s/n 038443-earlier), 7700 (s/n 038443-earlier), 7800 (s/n 038443-earlier), 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Construction and industrial models 670B (s/n 011689-later), 672B (s/n 011689-later), 744E, Replaces John Deere OEM nos R93019, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433912)$95.01
Differential Pinion Gear, Used - For John Deere tractor models 4000, 4010, 4020, 4040 (s/n 6406-earlier), 4230, 4240 (s/n 15151-earlier), 4320, 4430, 4440 (s/n 46789-earlier), 7520, 8430, 8440, 8630, 8640, Replaces John Deere OEM nos R26035, R42444, Teeth: 13, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498847)$40.01
Front Axle Knee, Right Hand, Used - For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number AR80192, AR59194, AR59214, Replaces John Deere Casting nos R64387, R49607, R53221, Right Hand, Regular, For a new version of this item use Item #: 430530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496744)$440.01
Front Axle Pin Rear Bushing - The measurements on this bushing are: 1.690 inches outside diameter, 1.500 inches inside diameter, and 2.000 inch long. It is used on John Deere 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces R65827 (Item #: 109837, Ref: R65827)$11.30
Pinion Gear, Used - For John Deere tractor models 700, 2510, 2520, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7405, 7500, 7520, 8430, 8630, Replaces John Deere OEM nos A4379R, Teeth: 12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431225)$60.01
Pinion Shaft Gear, Used - For John Deere tractor models 4000 (s/n 201000-later), 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R46435, Front, Teeth: 10 and 34, Quad and Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433692)$45.01
Pinion Shaft Gear, Used - For John Deere tractor models 4040, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos R46117, Syncro 2nd and 5th Speed, Teeth: 36 and 34, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498576)$150.01
Pinion Shaft Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, Replaces John Deere OEM nos R46120, Syncro 6th and 8th Speed, Outside Diameter: 4.6", Wide tooth Cut, Verify outside diameter, Teeth: 26 and 31, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498574)$163.01
Pinion Shaft Gear, Used - For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, Replaces John Deere OEM nos R46118, Range C Quad and Syncro 4th and 7th Speed, Teeth: 27 and 34, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498575)$150.01
Pinion Shaft Gear, Used - For John Deere tractor models 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos R46436, Rear, Teeth: 10 and 31, Quad, Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433693)$50.01
Planetary Pinion Carrier, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 7520, Replaces John Deere OEM nos R42901, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498766)$75.01
Planetary Pinion Gear, Used - For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM number R59696, Teeth: 31, Width: 2-3/4", For a new version of this item use Item #: 173355, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498815)$128.01
Planetary Sun Shaft, Used - For John Deere tractor models 4055, 4250, 4255, 4440, 4455, 8440 (Front Axlle), 8450 (Front Alxle), 8630 (100MM Front Axle), Replaces John Deere OEM number R59698, For a new version of this item use Item #: 173496, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499616)$165.01
Planet Pinion Carrier, Used - For John Deere tractor models 4250, 4255, 4350, 4440, Replaces John Deere OEM nos R59756, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499617)$210.01
No Picture
Plate, Wheel Manifold - For John Deere tractor models 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Compatible with John Deere Combine (s) 6600, 6620, 7700, 7720, 8820, Compatible with John Deere Harvester (s) 5200, 5400, 5440, 5460, 5720, 5820, Compatible with John Deere Construction and industrial models 670A (Automatic Blade Control System, Graders), 670B (Motor Graders), 670C (s/n 582129-earlier, Motor Graders), 670CH (s/n 582129-earlier, Motor Graders), 672A (Automatic Blade Control System, Graders), 672B (Motor Graders), 672CH (s/n 582129-earlier, Motor Graders), 770A (Automatic Blade Control System, Graders), 770B (Motor Graders), 770BH (Motor Graders), 770C (s/n 582129-earlier, Motor Graders), 770CH (s/n 582129-earlier, Motor Graders), 772A (Automatic Blade Control System, Graders), 772B (Motor Graders), 772BH (Motor Graders), 772CH (s/n 582129-earlier, Motor Graders), Replaces John Deere OEM number R42818, Power front wheel drive oil manifold and motor cylinder plate, (Item #: 171840)$234.00
No Picture
Power Steering Bearing Plate - For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, Replaces John Deere OEM number R44406, (Item #: 165074)$147.00
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Item #: 113859, Ref: R34348)$68.00
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152)$69.98
Pump Shaft - Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Item #: 113862, Ref: R79154)$73.98
Pump Shaft - Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Item #: 113861, Ref: R79156)$61.98
Rear Cast Wheel Pinion Gear, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2010, 2020, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2141, 2240, 2350, 2440, 2510, 2520, 2541, 2550, 2630, 2640, 2750, 2755, 2840, 2940, 2941, 2950, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3141, 3150, 3641, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7020, 7200, 7400, 7520, Replaces John Deere OEM nos B3014R, Teeth: 2 (inside) 14 (outside), Inside Diameter: .85", Outside Diameter: 2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434488)$82.01
Ring Gear And Pinion Set, Used - For John Deere tractor models 4040 (s/n 001083-earlier), 4230, 4240 (s/n 001139-earlier), 4430, 4440 (s/n 005921-earlier), Replaces John Deere OEM nos AR63369, Replaces John Deere Casting nos R33062 and R50533, Teeth: 9 and 47, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431139)$475.01
Ring Gear And Pinion Set, Used - For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4455, Replaces John Deere OEM nos AR94183, AR63369, Replaces Casting nos R33062 and R71557, R63303 and R71558, Matched Set, Quad Range and Syncro Range Transmissions, Use R57725 3/8" x 1" Coarse Bolt, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499622)$395.01
Spindle Bushing - Used on John Deere models: 2955, 3055, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810, 310A (below serial number 700147), 310B (below serial number 700147), 401D (below serial number 700147), 480C (below serial number 700147). 1.750 Inside Diameter. Price shown is for each, sold only in multiples of 2 items. Replaces R49835 (Item #: 109646, Ref: R49835)$10.50
Spindle, Hi-Crop LH and RH - Used on Hi-Crop Axles, the measurements on this spindle are: 28.625 inches, B - 1.750 inches, C - 1.968 inches, D - 1.312 inches. Used on the Hi-Crop variants of John Deere models: 4050, 4240, 4250, 4255, (4430 Also Order 1 Each Of JLM104948 and LM1049 bearings), 4440. Parts associated with this spindle are: R49835 Bushings, R49838 Thrust washer, R49841 Hub, WBKJD8 Wheel Bearing Kit, each sold individually. (Item #: 104780, Ref: AR82754)$603.00
Spindle - Left Hand and Right Hand, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7200 (Hi-Crop), 7210 (Hi-Crop), 7400 (Hi-Crop), 7410 (Hi-Crop), 7510 (Hi-Crop), 7600, 7610 (s/n 010664-earlier), 7700, 7710 (s/n 011300-earlier), 7800, 7810 (s/n 013023-earlier), Compatible with John Deere Harvester(s) 9910, 9920, 9930, Replaces John Deere OEM number AR81954, RE57643, Right or Left Side, Dimension A: 14.687", Dimension B: 1.750", Dimension C: 1.968", Dimension D: 1.312", Splines: 6, For a new version of this item use Item #: 102224, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402224)$124.01
Spindle, Left or Right Side - Has 14.687 x 1.75 inch Splined Upright Shaft. Inner bearing - 1.968 inches, Outer bearing - 1.312 inches. Used Left or Right side. 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7200 (to s/n 010920), 7400, 7600, 7610 (to s/n 010664), 7700, 7710 (to s/n 011300), 7800, 7810 (to s/n 013023). Uses 2 - R49835 Bushing, 2 - R49838 Thrust Washers, WBKJD8 Wheel Bearing Kit. Replaces: AR81954, RE57643. (Item #: 102224, Ref: AR81954)$204.00
Spindle Thrust Washer - This Spindle Thrust Washer measures 1 3/4 inches inside diameter, 3 inches outside diameter. Two are used per spindle, 4 per tractor. Sold individually. (Item #: 109830, Ref: R49838)$4.80
No Picture
Spindle Thrust Washer, Used - For John Deere tractor models 2955, 3050, 3055, 3255, 3350, 4030, 4040, 4050, 4230, 4250, 4255, 4430, 4440, 4450, 6010, 6100, 6120, 6200, 6210, 6300, 6310, 6320, 6400, 6410, 6420, 6510, 6520, 6605, 7210 (Prior S/N 010920), 7410 (Prior S/N 011540), 7510, 7600, 7610, 7700, 7710, 7810, Compatible with John Deere Combine(s) 6620, Compatible with John Deere Harvester(s) 6610, 7200, 7400, 7800, Replaces John Deere OEM number R49838, 2 Required Per Spindle, ID: 1.750", OD: 3.000", For a new version of this item use Item #: 109830, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435455)$2.70
Steering Arm - Left Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces OEM R61153 (Item #: 102699, Ref: R3028)$172.00
Steering Arm - Right Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 1.75 inch spindles with 6 splines. Replaces OEM R61152 (Item #: 102706, Ref: R3029)$100.00
Steering Arm - Left Hand, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R61153, R50768, Teeth: 6, Left Hand, Diameter: 1.75", For a new version of this item use Item #: 102699, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402699)$30.01
Steering Arm - Right Hand, Used - For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R61152, R50767, Right Hand - 1.75" diameter with 6 teeth, For a new version of this item use Item #: 102706, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402706)$30.01
Steering Column Tube, Used - For John Deere tractor models 4030 (s/n 8840-later), 4040, 4050, 4230 (s/n 39173-later), 4240, 4250, 4430 (s/n 70125-later), 4440, 4450, 4455, 4630 (s/n 29214-later), 4640, 4650, 4840, 4850, 8430 (s/n 4773-later), 8440, 8450 (s/n 5155-earlier), 8630 (s/n 6657-later), 8640, 8650 (s/n 7314-earlier), 8850 (s/n 6059-earlier), Replaces John Deere OEM nos AR81184, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499837)$163.01
No Picture
Steering Coupler, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430 (1974-1981), 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1177, 1188, 4435, Compatible with John Deere Harvester(s) 7440, 9920, 9940, 9950, 9970, Compatible with John Deere Scraper(s) 762, 762A, 762B, 862, 862B, Replaces John Deere OEM nos R50869, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446969)$29.01
Steering Metering Pump, Used - For John Deere tractor models 4030 (s/n 8840-later), 4040, 4050, 4230 (s/n 8840-later), 4240, 4250, 4430 (s/n 8840-later), 4440, 4450, 4455, 4630 (s/n 8840-later), 4640, 4650, 4840, 4850, Replaces John Deere OEM number AR89199, Has 4 threaded fittings, For a Remanufactured version of this part use Item #: 207236, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499835)$975.01
Steering Release Rod, Used - For John Deere tractor models 1640 (with SG2 s/n 43000-later), 2040 (with SG2 s/n 43000-late), 2040S (with SG2 s/n 43000-later), 2140 (with SG2 s/n 43000-late), 2350 (with SGB), 2355 (with SGB), 2550 (with SGB), 2555 (with SGB), 2650 (with SGB), 2650N (with SGB), 2750 (with SGB), 2755 (with SGB), 2850, 2940, 2950 (with SGB), 2955 (with SGB), 3040 (with SGB s/n 43000-later), 3055, 3140 (with SGB s/n 43000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560 (4630), 4630, 4640, 4650, 4755, 4760, 4840 (4850), 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9920, 9930, 9935, 9940, 9960, 9965, 9970, 9976, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos AR54808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499865)$15.51
Steering Shaft, Used - For John Deere tractor models 1640 (s/n Console shift 430000-later, Center Shift 430000-552318), 2040 (s/n Console shift 430000-later, Center Shift 430000-552318), 2040S (s/n Console shift 430000-later, Center Shift 430000-552318), 2140 (s/n Console shift 430000-later, Center Shift 430000-552318), 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n Console shift 430000-later, Center Shift 430000-552318), 3055, 3140 (s/n Console shift 430000-later, Center Shift 430000-552318), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1174H4, 1177, 1177H4, 1188, 1188H4, 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 7455, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, Compatible with John Deere Construction and industrial models 762, 762A, 762B, 862, 862B, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos R62280, R50868, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432220)$89.01
Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875)$66.00
Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227)$57.00
Steering Wheel Cap, Used - For John Deere tractor models 820, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2250, 2440, 2510, 2520, 2630, 2640, 3010, 3020 (s/n 123000-later), 4000, 4010, 4020 (s/n 210000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 5103, 5105, 5203, 5205, 5220, 5225, 5303, 5320, 5325, 5400, 5420, 5425, 5500, 5520, 5525, 6300, 6403, 6603, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7815, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9560, 9620, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9600, 9610, 9640, 9650, 9660, 9680, 9750, 9760, 9860, 9880, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6910, 6950, 7460, 9935, 9970, 9976, 9986, 9996, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 4700, 4710, 4720, 4920, 6700, Replaces John Deere OEM number AL155227, AL118173, R47998, For a new version of this item use Item #: 101453, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 401453)$33.00
Tie Rod - Tie rod end, inner, threaded, right hand threads, 3-7/8 to center of post. For all adjustable front axles on tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 102257, Ref: AR63588)$23.70
Tie Rod - Tie rod end, outer, drilled, 8 holes, 16-1/8 to center of post. For regulard and Hi-Crop adjustable front axles. Tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 102255, Ref: TP-AR63592)$38.00
Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Narrow Row Wide Front End. (Item #: 104872, Ref: AR44335)$92.00
Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Extra Wide Row Front Axle. Tie Rod Assembly. (Item #: 102257, Ref: AR63588)$23.70
Tie Rod Assembly - For tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all Hi-Crop Models. (Item #: 104875, Ref: AR44338)$154.00
Tie Rod Assembly - For tractor models 4640 SN# up to 2436 with power front axles, (3630, 4040, 4230, 4250, 4430, 4440 all with power front axles. (Item #: 104886, Ref: AR44339)$136.00
Tie Rod Assembly, Complete - Assembly consisting of AR63588 Inner Tie Rod, R54965 Tie Rod Tube, R28023 Clamp, AR63593 Long Tie Rod plus hardware. Used on extra wide front ends. This front end is found on some of the following John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 104874, Ref: AR44337)$166.00
Tie Rod Assembly - Extra Wide Front Axles, Used - For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All with Extra Wide Front Axles), Replaces John Deere OEM number AR44337, Complete Tie Rod Assy, All models listed with extra wide front axles, For a new version of this item use Item #: 104874, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454395)$86.01
Tie Rod Boot - For John Deere tractor models 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4240, 4250, 4320, 4430, 4440, 4455, Replaces John Deere OEM number R28019, R40589, Replaces Allis Chalmers OEM number 70223558, 223558, Base: 1.800", Height: 0.765", Hole I.D: 0.740", (Item #: 165042)$5.00
Tie Rod Clamp - For John Deere tractor models 4040, 4230, 4250, 4430, 4440 (All with Power Front Axle), 4555, 4560, 4630, 4640, 4755, 4760, Replaces John Deere OEM number M2301T, (Item #: 104884)$5.20
Tie Rod Clamp - For John Deere tractor models 4040, 4240, 4440, 4640 (s/n 2437 - earlier), 4840, 4850, 4955, 4960, 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8300, 8310, 8400, 8410, Compatible with John Deere Combine (s) 4425 (with Steering Cylinder), 6602, 6620, 6622, 7720, 8820, Compatible with John Deere Harvester (s) 7450, 7455, 9935, 9960, 9965, 9970, 9976, Replaces John Deere OEM number R66307, (Item #: 104889)$7.80
Tie Rod End - Short threaded, A= 4.187", B= 1.00", 16 thread. Used on 4640 Serial Number below 2436 WITH POWER FRONT AXLES), (3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD) Replaces AR63590. (Item #: 102271, Ref: D8NN3289BB)$21.00
Tie Rod End - This Tie Rod End is 22.500 Inches from the center of the ball joint to the end of the rod. The Rod is 1.116 inches in diameter. Used on (4640 Serial number below 2436 WITH POWER FRONT AXLES), 3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD. Replaces AR63587. (Item #: 102260, Ref: AR63587)$41.87
Tie Rod End, Outer - Used on John Deere 4040, 4240, 4440, (4640 after serial number 2437 with power front wheel drive), 4840, 4850, 4955, 4960. Verify measurements or part number before ordering. The tractors listed came with more than one front end. This part measures 4.871 inches from the center of the ball joint to the end of the threads, 1.125 inches diameter with 12 Thread. (Item #: 102265, Ref: AR85943)$21.40
Tie Rod Inner - 4.187 Long 1.00 diameter with RH Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle (Item #: 102271, Ref: R3834)$21.00
Tie Rod, Long - Tie rod end, outer, drilled, 9 holes, 18-3/4 to center of post. For wide adjustable front axles. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. (Item #: 102256, Ref: AR63593)$45.00
No Picture
Tie Rod Outer - 14.250 Long .995 diameter with 7 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle. (Item #: 102254, Ref: R3831)$42.00
Tie Rod Outer - 16.00 Long 1.00 diameter with 8 Holes For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Regular or Hi-Crop Front Axle (Item #: 102255, Ref: R3048)$38.00
Tie Rod Outer - 18.750 Long .990 diameter with 9 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Extra Wide Front Axle. (Item #: 102256, Ref: R3049)$45.00
Tie Rod Outer - 22.50 Long 1.116 diameter with 8 Holes For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle. (Item #: 102260, Ref: R3050)$41.87
Tie Rod, Outer - Tie rod end, LH or RH (outer), 14-1/4 inches, 0.995 inches shaft diameter with 7 through holes. Used on adjustable narrow front axles. Tractors: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. (Item #: 102254, Ref: AR63591)$42.00
Tie Rod, Outer - Measures: 21 inches from the center of the ball joint to the end of the shaft, 1.180 inches shaft diameter with 8 cross holes. This Outer tie rod is used on the left and right side of John Deere models: 4040, 4240, 4440, (4640 serial number 002437 and up with power front wheel drive). The models listed all came with more than one front axle. Verify measurements or OEM number before ordering. (Item #: 102264, Ref: AR85947)$40.00
Tie Rod Tube - Used on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Verify part number or measurements before ordering. These tractors all came with more than one front end. Measures 17.500 inches long. One end is 7/8 X 18 right hand thread. The other side is 1.015 inches inside diameter. Replaces R54963, R54966, AR44338. (Item #: 102258, Ref: R54963)$31.00
Tie Rod Tube - Verify measurements before ordering. The models listed were built with more than one front end. This part measures 15.375 inches Long, 7/8 x 18 RH Thread on one end and 1.015 inches inside diameter on the other. Used on John Deere 4030, 4040, 4050, 4055, 4230, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 104873, Ref: R54964)$32.00
Tie Rod Tube - Used on Extra Wide Row Front Ends, this tube measures 20.500 inches long with one end 7/8 X 18 RH Thread, and the other 1.015 inches inside diameter. The front end that this tube is used on can be found on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. (Item #: 102259, Ref: R54965)$47.00
Tie Rod Tube - Used on some Power Front Ends and some Regular Wide front ends, this tie rod tube measures 17.375 inches over all with 1 X 16 RH Thread on one side and 1.143 inches inside diameter on the other. All of the tractors listed were produced if several front end variants. Verify measurements or part number before order. For John Deere models: 4040, 4230, 4240, 4250, 4430, 4440, 4560, 4630, 4640, 4650, 4755, 4760 (Item #: 102261, Ref: R55075)$28.70
Tie Rod Tube - For John Deere tractor models 4040, 4240, 4440, 4640 (s/n 2437 - earlier), Replaces John Deere OEM number R66303, 19.750" Long, (Item #: 104890)$48.98
Tie Rod Tube - 17.50 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Regular Front Axle (Item #: 102258, Ref: R3044)$31.00
No Picture
Tie Rod Tube - 15.375 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle (Item #: 104873, Ref: R3832)$32.00
Tie Rod Tube - 20.50 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Extra Wide Front Axle (Item #: 102259, Ref: R3045)$47.00
Tie Rod Tube - 18.375 Long .875 diameter with Internal Threads For 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Hi-Crop Front Axle (Item #: 184751, Ref: R3833)$46.00
No Picture
Tie Rod Wedge Block, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4555, 4560, 4630, 4755, 4760, 4955, 4960, 6030, 7600, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8560, 8760, 8960, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6620, 7700, 7720, Compatible with John Deere Harvester(s) 484, 5200, 5400, 5420, 5440, 5460, 5720, 5730, 5820, 5830, 7440, 7445, 7800, 9900, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM number R28024, For a new version of this item use Item #: 104867, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435355)$1.01
Wheel Half Sleeve, Keyed - 92 mm - For John Deere tractor models 4430, 4440, 4520, 4620, 5010, 5020, 6030, 8430, 8630, Replaces John Deere OEM number AR83354, R35303, Keyed Half, Includes Dowels, (Item #: 109094)$156.00
Wheels
No Picture
10" x 16" Front Wheel Rim - For John Deere tractor models 3050, 3350, 4050, 4240, 4250, 4430, 4440, 4450, 4520, 4560, 4620, 4630, 4640, 4760, 4840, 4960, 5010, 5020, 6030, Compatible with John Deere Harvester (s) 9910, 9920, Replaces John Deere OEM number JD3207, 99A900, For 11" x 16" Tire, 8 bolt pattern, Offset: .50" negative, Pilot hole: 6", (Item #: 176565)$163.00
20" X 30" Drop Center Rim, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 6405, 6415, 6605, 7020, 7505, 7515, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Replaces John Deere OEM nos R34659, 20X30, For 23.1X30 Tires, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497233)$263.01
Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235)$5.01
Hub Cap - Used on John Deere 2030, 2510, 2630, 4030, 4230, 4320, 4430, 7520, 7520, 2150, 2440, 2640, 2755, 2840, 4040, 4040, 4050, 4250, 4240, 4240, 4450, 4455, 4440 with one of the following hubs: R49839, R49841, P58400, R112915. This part is also used as an oil pump end cap for oil pump RE591837. This cap is not threaded. It taps into place. 2.688 inch outside diameter of base where it fits into the hub, 1.750 inches tall. (Item #: 179597, Ref: R50992)$13.10
No Picture
Hub Cap, Used - For John Deere tractor models 2030, 2150, 2155, 2255, 2355, 2355N, 2440, 2510, 2555, 2630, 2755, 2840, 2855N, 2955 (s/n 765516-earlier), 3055, 3255, 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 5403, 5605, 5705, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7510, 7520, 7600, 7700, 7710 (s/n 090000-later), 7800, 7810 (s/n 090000-later), Compatible with John Deere Harvester(s) 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 210LE, 300B, 300D, 310D, 315D, Compatible with John Deere Tillage(s) 512, 637, 650, 685, 985, 2100, 2200, 2210, 2400, 2410, 2700, 3710, Compatible with John Deere Drill(s) 455, 730, 737, 750, 770, 780, 1990, 9000, 9400, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos R50992, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442136)$9.01
Rear Cast Wheel Pinion Gear Shaft, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1030, 1120, 1130, 1520, 1530, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2840, 2850, 2950, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7405, 7520, 8430, 8440, 8450, 8640, 8650, Replaces John Deere OEM nos A4380R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430283)$21.01
Rim Clamp, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1120, 1520, 1630, 1640 (s/n 429999-earlier), 1830, 1840 (s/n 429999-earlier), 2010, 2020, 2030, 2040 (s/n 429999-earlier), 2120, 2130, 2140 (s/n 429999-earlier), 2440, 2510, 2520, 2630, 2640, 3010 (049999-earlier), 3020, 3030, 3040 (s/n 429999-earlier), 3120, 3130, 3140 (s/n 429999-earlier), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Construction and industrial models 480, Replaces John Deere OEM nos A4388R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498960)$6.01
Square Rim Clamp Bolt, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1630, 1830, 2020, 2030, 2130, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 3030, 3120, 3130, 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces John Deere OEM number 08H4694, 36" OR 42" RIM, 5/8" X 4", SAE 8, For the nut use Item #: 464266, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444632)$4.76
Square Rim Clamp Bolt, Used - For John Deere tractor models A, AO, AR, 50, 60, 70, 620, 630, 720, 730, 1010, 1830, 2010 (s/n 42001-later), 2030, 2130, 2510, 2520, 3010, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Combine(s) 55, 95, 105, 6602, 6622, Replaces John Deere OEM nos A4064R, R34801, 5/8" X 3 - 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444631)$3.76
Wheel Bearing Kit - For 2955, 3055, 3255, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n JLM10498 (Cone), LM104912 (Cup), M88048 (Cone), M88010 (Cup), 23342 (Seal), R26632 (Seal Retainer). (Item #: 102231, Ref: WBKJD8)$47.00
Wheel Front 8X16 - Front Rim with weight holes. 8 inch x 16 inch. 6 bolt, 6 inch circle, 4.62 inch pilot. For the follwing models: 1520, 1640, 1840, 2040, 2040S, 2140, 2750, 2840, 2940, 2950, 3010, 3030, 3040, 3130, 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6403, 7405, 7500. Replaces A-JD3210. (Item #: 180445, Ref: D5NN1007A)$109.00
Wheel Half Sleeve, Keyed - 86 mm - For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 7020, 7520, Replaces John Deere OEM number R52032, AR83355, Keyed Half, 86 MM, Other Wheel Half use Item #: 498829, (Item #: 109649)$181.00
Wheel Half Sleeve, Keyed - 86 MM - For John Deere tractor models 4000 (Row Crop and Standard), 4020 (Row Crop and Standard), 4040, 4050 (s/n 2875-later), 4230, 4240, 4250 (s/n 3914-later), 4320, 4430, 4440, 4455 (Mexico), 7020, 7405 (With 18.4x38 Tires), 7520, Replaces John Deere OEM number R33532, Keyed Half, 86 MM, For use with Cast Rear Wheels R33450, R34680, R48954, R48955, R52160, R70309, (Item #: 109650)$124.87
Wheel Half Sleeve, Keyed - 86 MM, Used - For John Deere tractor models 4000 (Row Crop and Standard), 4020 (Row Crop and Standard), 4040, 4050 (Eff. S/N 2875), 4230, 4240, 4250 (From S/N 3914), 4320, 4430, 4440, 4455 (Mexico), 7020, 7405 (With 18.4x38 Tires), Replaces John Deere OEM number R33532, Keyed Half, 86 MM, Row Crop and Standard, For a new version of this item use Item #: 499629, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409650)$75.01
Wheel Half Sleeve, Keyed Half - 92 MM, Used - For John Deere tractor models 4040, 4240, 4250, 4430, 4440, 4450, 8430, 8630, Compatible with John Deere Harvester(s) 9940, 9950, Replaces John Deere OEM number R57927, Replaces Casting nos R57934, Use with cast wheels marked R33450, R34680, R48954, R48955, R52160, R70309, 92 MM, Pinion Half Sleeve use Item #: 499613, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499614)$75.01
Wheel Half Sleeve, Keyed Half, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 7020, 7520, Replaces John Deere OEM number R33534, Keyed Half, Pinion Half Sleeve use Item #: 499424, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499425)$129.01
Wheel Half Sleeve, Pinion Half - 92 MM, Used - For John Deere tractor models 4430, 4440, 4450, 8430, 8630, Compatible with John Deere Harvester(s) 9940, 9950, Replaces John Deere OEM number R57928, R93959, Use with cast wheels marked R33450, R34680, R48954, R48955, R52160, R70309, 92 MM, Pinion Half, Keyed Half Sleeve use Item #: 499614, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499613)$25.01
Wheel Half Sleeve, Pinion Half, Used - For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 7020, 7520, Replaces John Deere OEM number R33533, Pinion Half, Keyed Half Sleeve use Item #: 499425, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499424)$89.01
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697)$7.70
2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696)$7.70
No Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186)$22.80
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187)$14.80
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185)$41.00
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y)$24.40
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$88.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.40
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$55.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501)$57.00
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.30
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.30
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.60
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.50
Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.50
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.20
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$58.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$16.10
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$16.10
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$120.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$51.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236)$382.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195)$122.00
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP)$8.70
No Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL)$76.00
No Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT)$29.50
No Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP)$10.30
No Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL)$110.00
No Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT)$42.00
No Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP)$10.50
No Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL)$60.00
No Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT)$23.30
No Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP)$8.00
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$60.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$17.00
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$176.91
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$258.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602)$52.00
Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014)$46.00
Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016)$53.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759)$9.00
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166)$97.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166)$69.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$45.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$109.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.90
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$116.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$67.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
