FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 450 Tractor Parts

[Categories] [All John Deere Models] [Print]

Clutch

Clutch Disc, Remanufactured, AT104328 - For John Deere Construction and industrial models 400G, 440, 440A, 440B, 440C, 450, 450B, 450C, 450D, 450E, 455, 480, Replaces John Deere OEM number AT104328, AT160474, Clutch Size: 12", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 205703) $146.01

No
Picture
Clutch Disc, Remanufactured, R78424 - For John Deere Construction and industrial models 340D (s/n 21831 - earlier and s/n 25708 - 109737), 440, 440A, 440B, 440C (s/n 21831 - earlier and s/n 25708 - 109737), 440D (s/n 21831 - earlier and s/n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 455, 480 (s/n 21831 - earlier and s/n 25708 - 109737), Replaces John Deere OEM number R78424, Clutch Size: 12", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 5 Large Pads, (Item #: 205659) $179.41

Clutch Disc, Remanufactured, R78424HD6 - For John Deere Construction and industrial models 400, 440, 440A, 440C, 450, 455, 480, Replaces John Deere OEM number R78424HD6, Clutch Size: 12", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Lg Pads, (Item #: 205778) $174.01

Clutch Fork - For tractor models (450 with Hi-Lo transmission), 450B, 450C, 450D, 450E, 455D, 455E, 480G. (Item #: 173110, Ref: T34846) $69.98

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Item #: 108447, Ref: AL10107) $1.80

Pilot Bearing - Measures .596 ID, 1.378 OD. For tractor models 300, 301, 400, 401, 1020, 2030 early, 420, 430, 435, 310, 450, 480, 1010, 1020, 2010, 2030 early, 320 early, 330, 40, 850. Replaces CH19289, AL24903, AL28037, JD10107, JD8511, JD9464 (Item #: 108447, Ref: JD8511) $1.80

No
Picture
Pressure Plate Assembly - For John Deere Construction and industrial models 450, 450B, Replaces John Deere OEM number AT18416, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 205818, (Item #: 176358) $316.00

No
Picture
Transmission Disc - For John Deere Construction and industrial model 450 (With Hi-Lo Reverse Transmission), Replaces John Deere OEM number AT21500, AT141683, Spline Count: 10, Spline Diameter: 1.250", Diameter: 11", Center: 6 Springs, (Item #: 175858) $284.00

Cooling System

$John Deere 450 Radiator Hose - Bulk 10ft x 1\2 inch$
Radiator Hose - Bulk 10ft x 1/2" - For John Deere tractor models 350, 420, 430, 450, 500, 1010, 2010, 2510, 2520, 3010, 3020 (s/n 122999-earlier), 4040, 4240, 4440, 4520, 4620, 5085M, 5100M, 5220, 5320, 5420, 5520, Compatible with John Deere Construction and industrial models 70, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 315D, 350A, 350B, 350C, 380, 400G, 401B, 401C, 410, 440, 440A, 440B, 450B, 450C, 450D, 455D, 480A, 480B, 482, 482C, 485E, 486E, 488E, 500A (s/n 123113-earlier), Compatible with John Deere Hay Cutting (s) 2320, 2420, 3430, 3830, 4890, 4895, Replaces John Deere OEM number R31543, T11171, TY22562, R32641, R33678, T12397, T12815, T438T, T592T, I.D. (A): 1/2", O.D.: 27/32", Length: 10', Fits Engines: 3164D, 4219DF, 4239D, 4239T, 4039, 4045, 4239D, 4239T, 4239A, 3179DF, 3179TF, 4045HLV68, 4045HLV70, For Hose Clamp use Item #: 130452, (Item #: 150857) $19.00

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $8.50

Water Pump - For tractor models 450, 2510 Gas, 480A and 480B up to Serial Number 193099. Replaces AT29617-R, R29520. Casting# RT29520 Or T23629 (Item #: 118462, Ref: AT29617-R) $153.00

Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Item #: 107989, Ref: RE25043) $142.00

Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628) $90.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. (Item #: 164008, Ref: AR101549) $9.70

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 450, 450B, 450C, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490E, 495D, 500, 500A, 500B, 500C, 510, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540E, 540G, 548D, 548E, 548G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 550, 550A, 550B, 555, 555A, 555B, 570, 570A, 570B, 590D, 595, 595D and 610B. (Item #: 164008, Ref: AR101549) $9.70

Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Item #: 173137, Ref: R29521) $205.00

Electrical System

Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Item #: 117621, Ref: SE501356) $164.00

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 3300, 400, 401, 401B, 401C, 410, 450, 480, 480A, 480B, 24A, 440, 440A, 440B, 1010, 2010, 2020, 2030, 2510, 2520 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564. (Item #: 105566, Ref: AT14692) $14.40

Voltage Regulator - This voltage regulator is used on some of the following 1020, 1520, 1530, 2020, 2030, 2440, 2630, 2640, 300B Indust/Const, 301A Indust/Const, 302 Indust/Const, 302A Indust/Const, 401B Indust/Const, 401C Indust/Const, 4020, 4455, 450 Riding Mower, 4520. Replaces AMO6064, PL105-139, 1400-0569, 230-16102, 8010-139, VR-1755, 3195003, 3211952, 166-139, 5-139, 5-81, 5-67, R2AM4, 8RH2004D, 8RB2007, 105-139, VSH-6201R, 8-359, M5-146, M09-05, AR77485, AT21815. 12 Volt, B-Circuit, Neg ground. 15.2v set. Plug-Type N; Wiring Code 3 Terminal ID: Red Isolation Diode (+), Black Ground, Green Field, Yellow Ignition. (Item #: 125218, Ref: AR77485) $30.50

Engine Bearings

Main Bearings - .010 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .010 oversize bearing set replaces John Deere part numbers AT21110, AT21132 (Item #: 106804) $73.00

Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106805) $55.00

Main Bearings - .030 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this ia .030 oversize bearing set replaces John Deere part numbers AT21136, RE27368 (Item #: 106806) $58.00

Main Bearings - Standard - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this bearing set replaces John Deere part numbers AT21139, AT21140 (Item #: 106803) $78.00

No
Picture
Rod Bearing, .010, Gas - SINGLE rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 2520 SN# 157354>, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODEL, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G (Item #: 106752, Ref: AT21117) $17.70

Rod Bearing, .020, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106753, Ref: AT21119) $17.90

Rod Bearing, .030, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106754, Ref: AT10519) $37.60

Rod Bearing, STD, Gas - SINGLE (STD size) rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 GAS with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G, JD544 EARLY, JD544 LATE (Item #: 106751, Ref: AT10123) $17.40

Steering Clutch Disc - For John Deere Construction and industrial models 450, 450B, Replaces John Deere OEM number T20716, T211832, T44129, O.D.: 10.875", Teeth: 38 Internal, Fiber Disc, (Item #: 128471) $25.20

Engine Gaskets

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Item #: 176661, Ref: R97351) $11.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1020, 3300, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D, 350, 350B, 350C, 350D, 350D, 355D, 355D, 400G, 450, 450B. Replaces: AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.00

Engine Rebuild Kits

No
Picture
Engine Major Overhaul Kit - For 2020, 2510, 400, 440, 450, 480 all with SN<158257, 4.202 Diesel, 300 Series, O-Rings on liner, block # T23405 or T24961, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set, Camshaft Conn Rod Bushing and Bolts, and Camshaft Bushing. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030, Camshaft Bushing out. Diameter .020 O/S or inner dia. .020 O/S. Rear Seal not used with flywheel housing marked T20300, T22991. (Item #: 130672, Ref: OK4481) $670.00

Engine Parts

Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Item #: 152042, Ref: R82820) $176.00

Connecting Rod - Used on John Deere 4045D, 4045T, 6068T, 6068D PowerTech engines. This connecting rod is a direct replacement for rods marked R500000. It will also replace rods marked R123959. It is used with a 1.375 inch piston pin. Replaces John Deere part numbers RE60272, RE500002. (Item #: 123951) $61.00

Friction Disc - For John Deere Construction and industrial models 450, 455, 550, 555, Replaces John Deere OEM number T82355, O.D.: 10.89", Teeth: 38, (Item #: 127154) $56.00

Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623) $7.60

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Item #: 156030, Ref: T23471) $5.40

No
Picture
Sleeve and Piston Kit - For one hole. Fits Models: (1020 gas with SN# up to 162078), (2020 SN# up to 159926), (2510 gas with block # T23405, T24960, T26932), (300, 350, 400, 450, 480 early models). Reference SK404 (Item #: 189185, Ref: SK404) $201.00

Fuel System / Air Intake

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $300.00

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Injection Return - "T" Boot fuel injection return. Fits models: 1020, 1120, 2020, 2120, 2510, 3120, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 5200, 5400, 5440, 5460, 6076 Eng. SN# <576895, 6600, 6602, 6619 Eng. SN# <027969, 6620, 690B, 693B, 7440, 7700, 7720, 820, 8430, 8630, 920, 9920, 300, 350, 400, 440, 440A, 440B, 450, 480, 544, 544A, 570, 570A, 740, 743, 762. (Item #: 179682, Ref: T23425) $5.70

Gauges

No
Picture
Temperature Gauge - For John Deere Construction and industrial models 340D, 350, 350B, 350C, 350D, 355D, 380, 410B, 415B, 440C, 440D, 444, 444C, 444CH, 444D, 448D, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 510B, 515B, 540B, 540D, 540E, 544, 544A, 544B, 544C, 544D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 610, 610B, 640, 640D, 640E, 643, 643D, 644, 644A, 644B, 644C, 644D, 646, 648D, 690B, 693B, 710B, 740, 740A, 740E, 740G, 743, 743A, Replaces John Deere OEM number AT104755, (Item #: 176352) $112.00

Hydraulic System

Hydraulic Pump - For John Deere Construction and industrial models 350, 350B, 350C, 350D, 355D, 450, 450B, 450C, 450D, Replaces John Deere OEM number AT436900, AT38801, (Item #: 170203) $943.72

No
Picture
Hydraulic Pump - For John Deere Construction and industrial models 450, 450B, 450C, 455D, 743A, Replaces John Deere OEM number AT38800, (Item #: 171572) $684.00

Hydraulic Seal Kit - Angle Cylinder - For John Deere Construction and industrial models 450, 450B, 450C, 450D, 450E, 550, 550B, Replaces John Deere OEM number AR105432, Rod: 1-1/2", Bore: 3-1/2", (Item #: 152867) $67.00

Hydraulic Seal Kit - Angle Cylinder - For John Deere Construction and industrial models 310, 450, 544, 750, 850, Replaces John Deere OEM number AH212088, (Item #: 152919) $14.60

No
Picture
Hydraulic Seal Kit - Angle Cylinder - For John Deere Construction and industrial models TC54, 450, 544, Replaces John Deere OEM number AH153497, Rod: 40", Bore: 63", (Item #: 152996) $87.00

No
Picture
Hydraulic Seal Kit - Angle Cylinder - For John Deere Construction and industrial model 450, Replaces John Deere OEM number RE37004, Rod: 40 MM, Bore: 70 MM, (Item #: 153364) $10.60

No
Picture
Hydraulic Seal Kit - Arm Cylinder - For John Deere Construction and industrial model 450, Replaces John Deere OEM number AT302758, Rod: 130 MM, Bore: 190 MM, (Item #: 153296) $266.00

Hydraulic Seal Kit - Backhoe Crowd Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550, Replaces John Deere OEM number RE18755, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152974) $70.00

No
Picture
Hydraulic Seal Kit - Blade Lift Cylinder - For John Deere Construction and industrial models 310, 410, 450, 510, 550, 650, 710, 710D, Replaces John Deere OEM number RE37003, Bore: 80 MM, (Item #: 152988) $12.40

Hydraulic Seal Kit - Boom Bucket Cylinder - For John Deere Construction and industrial models 450, 550, 644, 650, 744, 824, 1510, Replaces John Deere OEM number AH149813, (Item #: 153683) $41.20

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 310, 350, 410, 450, 500, 544, 550, 555, 640, 644, 646, 655, 693, 740, 743, 760, Replaces John Deere OEM number AR105355, (Item #: 152895) $80.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 440, 440C, 444, 450, 455, 540, 544, 555, 644, 670, 762, 770, Replaces John Deere OEM number AR105346, (Item #: 153019) $87.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 410, 415, 440, 440C, 444, 444D, 450, 510, 515, 540, 550, 610, 640, 655, 740, Replaces John Deere OEM number RE14208, RE14523, Rod: 2-1/4", Bore: 4-1/2", (Item #: 153029) $43.40

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial model 450, Replaces John Deere OEM number AT196471, Rod: 115 MM, Bore: 170 MM, (Item #: 153290) $258.00

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550, Replaces John Deere OEM number RE18732, Rod: 2", Bore: 4", (Item #: 153347) $91.00

Hydraulic Seal Kit - Boom Lift Cylinder - For John Deere Construction and industrial models 350, 400, 401, 440, 450, 500, 544, 644, Replaces John Deere OEM number RE10640, Rod: 2-1/4", Bore: 4-1/2", (Item #: 152946) $65.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 450, 450B, 500B, 510, Replaces John Deere OEM number AR105392, (Item #: 152943) $38.70

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 450, 450B, 450C, 450D, 455D, 544, 770, Replaces John Deere OEM number RE18748, (Item #: 152985) $55.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 310, 310A, 310B, 350, 350B, 350C, 350D, 355D, 400, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 455E, 500A, 500C, 544, 544B, 550, 550A, 550B, 555, 555A, 555B, 644, Replaces John Deere OEM number RE18757, (Item #: 153011) $84.00

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 330, 370, 450, 892, Replaces John Deere OEM number AT264430, Rod: 95 MM, Bore: 145 MM, (Item #: 153155) $209.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 450, 450B, 450C, 450D, 450E, 510, 510B, 550, 550A, 550B, 610, 610B, 640, 640D, 655, 655B, 710, 710B, 740, 755, 755A, 755B, Replaces John Deere OEM number RE14094, Piston: 4-1/2", (Item #: 153333) $62.00

No
Picture
Hydraulic Seal Kit - Dozer Cylinder - For John Deere Construction and industrial model 450 (s/n 64134-earlier), Replaces John Deere OEM number 905002, Rod: 2-3/8", Bore: 2-3/8", (Item #: 153554) $35.60

No
Picture
Hydraulic Seal Kit - Lift Cylinder - For John Deere Construction and industrial models 450, 450B, 450C, 455D, 455E, 555, 555A, 555B, Replaces John Deere OEM number RE18739, Rod: 2-1/4", Bore: 4-1/4", (Item #: 152916) $57.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 302, 310, 350, 400, 401, 410, 440, 444, 450, 455, 500, 544, 550, 555, 644, 670, 770, Replaces John Deere OEM number RE18754, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152932) $61.00

Hydraulic Seal Kit - Stabilizer Cylinder - For John Deere Construction and industrial models 300, 310, 350, 355, 400, 410, 440, 440C, 444, 444D, 450, 500, 540, 544, 646, Replaces John Deere OEM number AR105387, (Item #: 152999) $57.00

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 210, 310, 315, 410, 450, 550, 644, 650, 724, Replaces John Deere OEM number AH212091, Bore: 80 MM, (Item #: 152920) $38.20

No
Picture
Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 210, 310, 450, 544, 710, 710D, Replaces John Deere OEM number RE20428, Bore: 70 MM, (Item #: 153065) $29.50

Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial models 300, 302, 350, 355, 401, 444, 444C, 450, 455, 544, 550, Replaces John Deere OEM number RE18756, Rod: 1-3/4", Bore: 3-1/2", (Item #: 152918) $31.10

No
Picture
Hydraulic Seal Kit - Swing Cylinder - For John Deere Construction and industrial models 300, 350, 400, 450, Replaces John Deere OEM number AR105393, Rod: 2", Bore: 4", (Item #: 153142) $56.00

Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 300, 350, 400, 401, 450, 455, 550, 555, 570, 743, Replaces John Deere OEM number AR105453, (Item #: 153146) $66.00

Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 310, 410, 450, 550, 700, 750, 850, Replaces John Deere OEM number AH212097, AH149812, (Item #: 153179) $11.98

No
Picture
Hydraulic Seal Kit - Tilt Cylinder - For John Deere Construction and industrial models 450, 550, Replaces John Deere OEM number AH134955, Bore: 90 MM, (Item #: 153247) $10.30

Hydraulic Seal Kit - Track Adjuster Cylinder - For John Deere Construction and industrial models 350, 400, 440, 450, 455, 550, 555, 1010, 2010, Replaces John Deere OEM number 905000, Rod: 2-3/8", Bore: 2-3/8", (Item #: 153686) $19.10

No
Picture
Hydraulic Seal Kit - Track Adjuster Cylinder - For John Deere Construction and industrial models 450, 455, 550, 555, 650, Replaces John Deere OEM number 905003, Rod: 2-3/8", Bore: 2-3/8", (Item #: 153688) $43.11

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.10

Miscellaneous

Seal - For John Deere Construction and industrial models 350, 400, 450, 455, 550, 555, 605, 650, Replaces John Deere OEM number AT124100, (Item #: 154287) $7.65

Seal - Hydraulic Track Tension Adjuster - For John Deere Construction and industrial models 350, 350B, 350C, 350D, 400G, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G, 555A, 555B, 555G, Replaces John Deere OEM number T37660, (Item #: 154284) $6.80

Oil System

Oil Pump - For 3300, 350A, 350B, 350C, 350D, 400, 401, 401A, 410, 440, 440A, 440B, 4400, 450, 450A, 450B, 480, 480A, 499, 5000, 5200, 5300, 5400, 5400N, 5500, 6602, 6620, 820, 830, (3164D, 3179, 4039D, 4039T, 4219DF, 4239D, 4239T, 6059D, 6059T, 6329D, 6359D, 6359T, ALL DIESEL ENGINES). Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Item #: 114022, Ref: RE35685) $69.00

Oil Pump Drive Gear, Used - For John Deere tractor models 301, 350, 450, 820, 830, 920, 1020 (s/n 248000-earlier), 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2950, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040S, 4050, 4240S, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7500, 7600, Compatible with John Deere Combine(s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s/n 689245-later), 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1174H4, 1177, 3300, 4400, 4420, 4425, 4435, 6600, 9400, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 8875, Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 190E, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 340D, 344E, 344G, 350B, 350C, 350D, 355D, 380, 400G, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 444E, 444G, 448D, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490E, 493, 495, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 540E, 540G (s/n 701059-earlier), 544, 544A, 544B, 544D, 544E, 544G, 548D, 548E, 548G (s/n 701059-earlier), 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595, 595D, 610C, 624E, 624G, 640, 640D, 640E, 640G (s/n 701059-later), 643, 643D, 648D, 648E, 648G (s/n 701059-later), 650G, 653E, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 690ELC, 693D, 710B, 710C, 710D, 740E, 748E, 750, 750B, 750C (s/n 715797-earlier), 755, 755A, 755B, 790ELC, 4400, 4500, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 3029, 4039, 4045, 4045 (s/n 100000-499999), 4219, 4239D, 4239T, 4276, 6059 (s/n 100000-499999), 6068 (s/n 100000-499999), 6329D, 6359, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20298, Teeth: 33, For a new version of this item use Item #: 121172, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411172) $141.60

Seats

Cushion, Arm Rest, Black - Fits Industrial/Construction: 350, 450, 450B, 450C, 550. (Item #: 182148, Ref: AT10140-1) $94.00

Cushion, Back, Black - Fits Industrial/Construction: 350, 450, 450B, 450C, 550. (Item #: 172610, Ref: AT10138-1) $106.00

Sheet Metal / Body Parts

No
Picture
Guard - For tractor models 1207, 1209, 1214, 1380, 350, 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 163427, Ref: TP-E62000) $13.80

Steering

Steering Clutch Separator Disc - 8.12" I.D., 6 teeth. For model 450. (Item #: 127162, Ref: T20717) $34.30

Steering Pin - For John Deere tractor models M, 40, 320, 330, 420, 430, 435, 450, 1010, Replaces John Deere OEM number AM1514T, AM1515T, Length 1", 405 Pin Diameter, 590 Diameter Stop Ring, 307 Height of Taper, Taper .358-.475, (Item #: 126708) $28.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.60

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.40

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.30

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.30

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$John Deere 450 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere 450 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 450 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 450 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere 450 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 450 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 450 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere 450 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $51.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00