FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 500A Tractor Parts

[Categories] [All John Deere Models] [Print]

Clutch

Pilot Bearing - This Pilot Bearing fits the following tractor models: 1050, 950, 5200, 5210, 5300, 5400, 5410, 5425, 5500, 5520, 300B, 301A, 302, 302A, 401B, 401C, 401D, 500, 500A, 500B, 500C, 3038, and 3155. It measures 1.4375 inches inside diameter, 2.676 inches outside diameter, and .587 inches thick. Replaces part numbers: JD8504 and JD9449. (Item #: 107933, Ref: C5NN7600A) $3.40

Cooling System

Thermostat - 180 degree. For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, 500B, 5010, 5020, 600, 6030, 700A, 760, 760A. (Item #: 109692, Ref: R36846) $11.70

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 450, 450B, 450C, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490E, 495D, 500, 500A, 500B, 500C, 510, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540E, 540G, 548D, 548E, 548G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 550, 550A, 550B, 555, 555A, 555B, 570, 570A, 570B, 590D, 595, 595D and 610B. (Item #: 164008, Ref: AR101549) $10.10

Drive Train

Gear Shift Pivot - This gear shift pivot Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 5010, 5020. 6030 Tractors. It also has applications in industrial applications. It R53247, AR26360, R47203. Pivots Marked R26185 (Item #: 152195, Ref: R53247) $17.60

Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Item #: 126760, Ref: R33512) $210.00

Electrical System

Distributor Rotor - Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Item #: 111190, Ref: 1954566) $3.80

Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Item #: 121144, Ref: AR39505) $22.50

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings

No
Picture
Main Bearing, .010 - For tractor models (4630 SN# 335845 and up with 6.404T/A 6 cyl eng.), (4640 with 6.466T and with 6.466A with SN# 233592 and below and 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T and 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below and 6.466A SN# 317858 and below 6 cyl eng.), ( (4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T/A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.) (Item #: 155963, Ref: AR74816) $6.98

Main Bearings - .010 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .010 oversize. Replaces AR49245, AR49238 (Item #: 106817) $100.00

Main Bearings - .020 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .020 oversize. Replaces AR49246, AR49239 (Item #: 106818) $58.00

Main Bearings - .030 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .030 oversize. Replaces AR49247, AR49240 (Item #: 106819) $65.00

Main Bearing Set, Standard - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. Standard. Replaces AR49242, AR49243 (Item #: 106816, Ref: MBK1439) $120.00

No
Picture
Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Item #: 166499, Ref: AR74814) $13.10

No
Picture
Thrust Bearing Set, .010 - For tractor models (4630 SN# 335845 and up with 6.404T/A 6 cyl eng.), (4640 with 6.466T and with 6.466A with SN# 233592 and below and 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T and 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below and 6.466A SN# 317858 and below 6 cyl eng.), ( (4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T/A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng. (Item #: 155964, Ref: AR77750) $13.98

Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). Thrust washers available as part number AR77747 (Item #: 166224, Ref: AR77748) $14.30

Engine Gaskets

No
Picture
Crankshaft Seal, Front - For tractor models All Industrial/Construction with 6.404D, (6.466D SN# 335846 and up). (Item #: 106851, Ref: AR49025) $15.30

Crankshaft Seal, Rear - For tractor models All Industrial/Construction with 6.404D, (6.466D SN# 335846 and up). (Item #: 106856, Ref: RE22764) $34.90

Oil Pan Gasket Set - This Oil Pan Gasket Set is used on John Deere: 500 (Serial number below 280000 Early Power Booster 4.270 4CYL ENG), 500A, 500B, 500C (Serial number 280000 and up 4.270 4CYL ENG), 510 (SN 280000> 4.270 4CYL ENG), 600 (Serial Number below 214999), 3010 (Gas with Block number R26150), 3010 (Serial number below 280000 4.270 4Cyl Eng and Early Power Booster Eng), 3020, 4000, 4020 (GAS Serial number below 200999). Engines: 254D, 254D, 201, 270D, 270D, 270D, 254D, 227, 241, 227 (Item #: 106911, Ref: AR30544) $21.00

Engine Parts

No
Picture
Crankshaft - For tractor models 3010, 500A, 3020 Diesel to replace crankshaft marked R40570, (JD500, JD500A, JD500B, 510, all Diesel to replace crankshaft marked R40570), 500 with SN# below 123113, (500B, 500C, both with SN# above 280000 with 4.270 4 cylinder engine. Crankshaft. (Item #: 102105, Ref: AR40485) $3329.01

No
Picture
Crankshaft, with Timing Gear - Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed, 3" snout. For tractor models All Industrial/Construction with 6.404D, (6.466D SN# 335846 and up). (Item #: 127288, Ref: RE53422) $1499.01

No
Picture
Flywheel Dowel Pin - This Flywheel Dowel is used with AR40565 flywheel. Three used per tractor. Replaces R40731 (Item #: R40731) $38.89

Flywheel with Ring Gear - For tractor models JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL / SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. 82 lbs. Additional $30.00 shipping due to weight. (Item #: 101907, Ref: AR40565) $500.00

Lifter - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4450 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4650 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, and 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, and 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, and 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Item #: 112420, Ref: R52773) $7.80

Ring Gear, Flywheel - This Flywheel Ring Gear has 165 Teeth, 16.678 inch outside diameter, and 15.540 inch inside diameter. It is used on 3010, 3020, 4000, 4010, 4020, 4030, 4230, 500 Indust/Const, 500A Indust/Const, 500C Indust/Const, 510 Indust/Const, 600 Indust/Const, All with GAS or LP Engines. Replaces original part number R26054 (Item #: 121929, Ref: R26054) $122.00

Thrust Washer - For tractor models (500A, 500B, 500C, 510 SN# 280000 and up 4.270 4 cyl eng.), (5440 SN# 6.404T/A 6 cyl eng.), (5460 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (5720 6.466T, 6.466A 6 cyl eng.), (5730 6.466T SN# 253373 and up and 6.466A SN# 233593 and up 6 cyl eng.), (600, 644, 644A, SN# 335845 and below with 6.404D, 6.404T/A 6 cyl eng.), (644C with 6.466T SN# 253373 and up and 6.466A 233593 and up 6 cyl eng.), (644D with 6.466D 6 cyl eng.), (644E, 644ER with 6.076H, 6.076T, 6.076A 6 cyl eng.), (646 SN# 335845 and below, 6.404T/A 6 cyl eng.), (646A with 6.466D 6 cyl eng.), (646B SN# 335845 and below 6.404T/A 6 cyl eng. (Item #: 168002, Ref: AR77747) $18.30

No
Picture
Valve, Exhaust - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161171, Ref: R44175) $11.30

Valve, Intake - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161172, Ref: R44174) $13.00

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 163383, Ref: R30939) $5.60

No
Picture
Piston Sleeve - For tractor models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Item #: 167276, Ref: R32050) $46.10

Exhaust System

Muffler Clamp - Used with Mufflers R1083 and R1085, this two piece muffler clamp is used on the following John Deere models with flared muffler inlets: 4020, 500, 3010, 3020, 4000, 4010, 4030, 4230, 500A, 510, 570B, 570A, 4040, 4240, 4440. Replaces part numbers AR46323, DR-300, R32235 (Item #: 114772, Ref: AR46323) $19.10

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On John Deere, it is used on the following Carburetors TSX85, TSX89, TSX245, TSX356, TSX475, TSX485, TSX491, TSX530, TSX615, TSX688, TSX756, TSX759, TSX777, TSX788, TSX802, TSX805, TSX806, TSX808, TSX809, TSX810, TSX812, TSX823, TSX860, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX907, TSX908, TSX908SL, TSX923SL, TSX941SL, TSX944, TSX945SL, TSX952SL, TSX953SL, TSXU838, TSXU1007, USX20, USX21, USX30, USX31, USX35, USX36, USX48SL, USX49SL, USX211. These carburetors are possible on John Deere Models: M, 600, MI, MT, 320, L, 500, LA, MC, 40, 330, 420, 430, 24, 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, 500A, 500B, 440A, LI, 440B, 99 Replaces: E10058, R10188 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor Float Valve - Viton needle float valve. For Models: 500, 500A, 600, 3010, 3020, 4010, 4020 using USX Marvel Schebler. Also substitute for AR10105R. Replaces AR10114, AR10105. Used on Marvel Schebler carburetors. (Item #: 190748, Ref: AR10114V) $9.70

Fuel Injector Boot, Pack of 12 - This is a fuel injector leak off boot. It is used on multiple John Deere diesel models. 1 used per injector. Price is for 12 boots. Replaces R34765 (Item #: 114213, Ref: R34765) $20.00

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $13.60

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $15.50

Gauges

Fuel Gauge - This fuel gauge is for 12 Volt NEGATIVE Ground Systems Only, Gas or Diesel. For 2 inch outside diameter opening, 1 1/2 inches thick gauge housing. It is 30 To 250 OHM Rating. Used on the following: 2520, (3020 serial number 123000 and up), (4020 serial number 201000 and up), 4320, 4520, 4620, (500A serial number 123114 To 152141), 500B, (5020 serial number 025000 and up), 6030, 7020, 7520; Replaces: AR45436, AT375294 (Item #: 108062, Ref: AT375294) $40.00

No
Picture
Transmission Oil Pressure Gauge - JD Power Shift Transmission Pressure Gauge for JD 600 Industrial, 500, 2510, 3020 up to SN # 122999, 4020 up to SN # 200999, 500A up to SN # 123113 Replaces: R34259. Measures 2.030 inches OD and 1/8 inch NPT male thread. (Item #: 160955, Ref: R34259) $42.98

Hitch / Drawbar

Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189) $33.80

Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $7.30

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $11.70

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.50

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.40

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.70

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

Top Link End - Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Item #: 110204, Ref: AR46298) $99.00

Hydraulic System

Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362) $15.10

Hydraulic Pump, Remanufactured - For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A refundable core charge OF $300.00 will be added to your order. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Item #: 200408, Ref: AR56160-R) $1223.01

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 310, 310A, 310B, 350, 350B, 350C, 350D, 355D, 400, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 455E, 500A, 500C, 544, 544B, 550, 550A, 550B, 555, 555A, 555B, 644, Replaces John Deere OEM number RE18757, (Item #: 153011) $84.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.40

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $25.90

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $10.00

Oil System

No
Picture
Oil Pump Drive Gear - Late style without keyway. FOr Models: 3010, 3020, 500, 500A, 500B, 500C, 4000, 4020, 4010, 600, JD600, JD500, JD500A, JD500B, 6600, 7700. (Item #: 156260, Ref: R45134) $201.00

PTO / Driveline

Shaft, PTO (540 RPM) - This is a 540 RPM shaft to replace 1000 RPM standard shaft. Fits tractor models 500A (IND), 500B (IND), 500C (IND), 600 (SN 201000>), 2510, 2520, 3020 (SN 123000>), 4000, 4020 (SN 201000>), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Dimensions: 11.840" long, 6-spline. (Item #: 121487, Ref: R38224SP) $159.00

Shaft, PTO (540 RPM) - Does not include JD7557 Bearing Race. Fits 500, 500A, 600, 2510, 3020 (SN <-122999), 4020 (SN <-200999). Dimensions: 10.687" long, 6-spline. (Item #: 111774, Ref: AR41753) $115.00

Sheet Metal / Body Parts

Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103952, Ref: R27883) $40.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.60

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.90

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.90

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 500A Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 500A Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere 500A Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 500A Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 500A Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 500A Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 500A Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$John Deere 500A Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.00

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00