FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 5820 Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Piston - For John Deere tractor models 5045E, 5055E, 5065E, 5075E, 5080R, 5083E, 5083EN, 5090R, 5093E, 5093EN, 5100R, 5101E, 5101EN, 5103, 5200 (s/n 620188-later), 5203, 5204, 5210, 5220, 5225, 5300 (s/n 630345-later), 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400 (s/n 640542-later), 5403, 5410, 5420, 5420N, 5425, 5425N, 5503, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5620 (s/n 411560-later), 5625, 5720 (s/n 411560-later), 5725 (s/n 005048-later), 5820 (s/n 411560-later), Replaces John Deere OEM number L158505, L101856, Inside Diameter: 9.529", Outside Diameter: 13.976", Thickness: 1.380", (Item #: 163798) $184.00

O-Ring, Durometer 70 - For John Deere tractor models 2950, 3040, 3140, 3150, 3640, 5045D, 5045E, 5050E, 5055D, 5055E, 5065E, 5075E, 5076E, 5076EF, 5076EL, 5076EN, 5078E, 5080R, 5080RN, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5090R, 5090RN, 5093E, 5093EN, 5100E, 5100R, 5100RN, 5101E, 5101EN, 5103, 5203, 5204, 5210, 5220, 5225, 5303, 5310, 5320, 5320N, 5325, 5325N, 5403, 5410, 5415, 5415H, 5420, 5420N, 5425, 5425N, 5503, 5510, 5520, 5520N, 5525N, 5600, 5603, 5605, 5610, 5615, 5620, 5625, 5700, 5705, 5715, 5715HC, 5720, 5725, 5820, Replaces John Deere OEM number L116345, Inside Diameter: 11.772", Thickness: .142", (Item #: 171554) $6.20

Cooling System

Reservoir Filler Cap - For John Deere tractor models SE6010 (European), SE6020 (European s/n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s/n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s/n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s/n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s/n 425337-earlier), SE6510 (European), SE6520 (European s/n 425337-earlier), SE6610 (European), SE6620 (European s/n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s/n 425337-earlier), 6110, 6120 (s/n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s/n 425337-earlier), 6220 (s/n 425337-earlier), 6300, 6310, 6320 (s/n 425337-earlier), 6400, 6405, 6410, 6410L, 6410S, 6415, 6420 (s/n 425337-earlier), 6425, 6500, 6505 (European), 6506 (European), 6510 (European), 6515 (European s/n 425337-earlier), 6520 (European s/n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s/n 425337-earlier), 6620 (European s/n 425337-earlier), 6715 (s/n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s/n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s/n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s/n 020921-later), 9120, 9200 (s/n 020921-later), 9220, 9300 (s/n 020921-later), 9300T, 9320, 9320T, 9400 (s/n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 3215 (s/n 206801-later), 3415 (s/n 206801-later), Replaces John Deere OEM number AL76661, (Item #: 126943) $1.98

Reservoir Filler Cap, Used - For John Deere tractor models SE6010 (European), SE6020 (European s/n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s/n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s/n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s/n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s/n 425337-earlier), SE6510 (European), SE6520 (European s/n 425337-earlier), SE6610 (European), SE6620 (European s/n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s/n 425337-earlier), 6110, 6120 (s/n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s/n 425337-earlier), 6220 (s/n 425337-earlier), 6300, 6310, 6320 (s/n 425337-earlier), 6400, 6405, 6410, 6410L, 6410S, 6415, 6420 (s/n 425337-earlier), 6425, 6500, 6505 (European), 6506 (European), 6510 (European), 6515 (European s/n 425337-earlier), 6520 (European s/n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s/n 425337-earlier), 6620 (European s/n 425337-earlier), 6715 (s/n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s/n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s/n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s/n 020921-later), 9120, 9200 (s/n 020921-later), 9220, 9300 (s/n 020921-later), 9300T, 9320, 9320T, 9400 (s/n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 3215 (s/n 206801-later), 3415 (s/n 206801-later), Replaces John Deere OEM number AL76661, For a new version of this item use Item #: 126943, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439718) $6.76

Reservoir Filler Cap with Bypass - For John Deere tractor models SE6010 (European), SE6020 (European s/n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s/n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s/n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s/n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s/n 425337-earlier), SE6510 (European), SE6520 (European s/n 425337-earlier), SE6610 (European), SE6620 (European s/n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s/n 425337-earlier), 6110, 6120 (s/n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s/n 425337-earlier), 6220 (s/n 425337-earlier), 6505 (European), 6506 (European), 6510 (European), 6515 (European s/n 425337-earlier), 6520 (European s/n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s/n 425337-earlier), 6620 (European s/n 425337-earlier), 6715 (s/n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s/n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s/n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s/n 020921-later), 9120, 9200 (s/n 020921-later), 9220, 9300 (s/n 020921-later), 9300T, 9320, 9320T, 9400 (s/n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 3215 (s/n 206801-later), 3415 (s/n 206801-later), Replaces John Deere OEM number AL78005, (Item #: 126945) $1.98

Reservoir Filler Cap with Bypass, Used - For John Deere tractor models SE6010 (European), SE6020 (European s/n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s/n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s/n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s/n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s/n 425337-earlier), SE6510 (European), SE6520 (European s/n 425337-earlier), SE6610 (European), SE6620 (European s/n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s/n 425337-earlier), 6110, 6120 (s/n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s/n 425337-earlier), 6220 (s/n 425337-earlier), 6505 (European), 6506 (European), 6510 (European), 6515 (European s/n 425337-earlier), 6520 (European s/n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s/n 425337-earlier), 6620 (European s/n 425337-earlier), 6715 (s/n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s/n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s/n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s/n 020921-later), 9120, 9200 (s/n 020921-later), 9220, 9300 (s/n 020921-later), 9300T, 9320, 9320T, 9400 (s/n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 3215 (s/n 206801-later), 3415 (s/n 206801-later), Replaces John Deere OEM number AL78005, For a new version of this item use Item #: 126945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439719) $5.26

Electrical System

Alternator - 12 volt, 90 amp. For tractor models (7445 1987-94 with 359 dsl), (5720 1982-86 with 466 dsl), (5730 1986-92 with 466 dsl or 619 dsl), (5820 1982-86 with 619 dsl), (5830 1986-92 with 466 dsl), (583 1986-92 with 619 dsl), (4040 1981-82 with 404 dsl), (4050 1983-88 with 359/466 dsl), (4240 1981-82 with 466 dsl), (4250 1983-88 with 466 dsl), 4350, (4440 1981-82 with 466 Turbo dsl), (4450 1983-90 with 466 dsl), (4640 1981-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (8440 1979-82 with 466 dsl), (8630 1978-80 with 619 dsl), (8640 1979-82 with 619 dsl). Replaces 100211-0290, 100211-0290, AR87205, AR93448, AT103789, SE501363, TY26050, TY6621. (Item #: 110571, Ref: AND0002) $172.00

Alternator - 12 volt, 72 amp. For tractor models (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), 5420, (5440 1977-82 with 404 dsl), (5460 1977-82 531 dsl), (5720 1982-86 with 466 dsl), (5820 1982-86 with 619 dsl), (4020 1971-72 with 360 gas or 404 dsl), (4030 1977-78 with 329 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4230 1977-78 with 404 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4320 1969-73 with 404 dsl), (4430 1977-78 with 404 dsl), (4440 1978-82 with 466 Turbo Dsl), (4450 1983-90 with 466 dsl), (4620 1969-73 with 404 dsl), (4630 1977-78 with 404 dsl), (4640 1978-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (6030 1970-77 with 531 dsl), (7520 1971-75 with 531 dsl), (8630 1975-78 with 619 dsl). replaces 1100490, 1102932, 1100287, 11013128, 1102926, 1105174, SE501382, TY6600, TY6772. Comes with single groove pulley. If you need a double groove, reuse your old one or order R81507 (Item #: 110572, Ref: ADR0133) $119.00

Alternator - Bosch Style (12370) - For John Deere tractor models 5620, 5720, 5820, 6010, 6110, 6120, 6210, 6220, 6310, 6310S, 6320, 6320L, 6410, 6410S, 6420, 6420L, 6510, 6510S, 6520, 6520L, 6610, 6620, 6810, 6820, 6910, 6920, 7220, 7320, 7420, 7520, Replaces John Deere OEM number AL111676, AL114093, Replaces Bosch manufacturer number 0-123-512-500, Replaces manufacturer number 12370, 220-5015, 11.203.204, 11.203.862, 11.204.152, Bosch Style, Voltage: 12, Rotation: Clockwise, Amperage: 115, Regulator: Internal, Without pulley, (Item #: 120122) $223.00

Alternator - Bosch Style (12379) - For John Deere tractor models 5620, 5720, 5820, 6010, 6020, 6110, 6110L, 6120, 6120L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6320, 6320L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6505, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6610, 6615, 6620, 6715, 6810, 6820, 6910, 6920, 7420, 7520, Replaces John Deere OEM number RE204426, AL111675, AL114092, Replaces Bosch manufacturer number 0-123-315-501, Replaces manufacturer number 12379, 220-5190, IA 1052, LRA01860, 90-15-6389, Bosch Style, Voltage: 12, Rotation: Clockwise, Amperage: 90, Regulator: Internal, Includes pulley, (Item #: 156113) $179.00

Blower Motor - Note, some John Deere applications require 2 R85234 orings to fit in the housing. These o-rings are not available though Yesterday's Tractors. This Blower motor is a double shaft, 12 volt single speed 2 wire motor with 3/8 inch shafts. Tractors: 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 4WD, 8440, 8450, 8630, 8640, 8650, 8850. Combine: 484, 4425, 6620, 6622, 7440, 7445, 7450, 7455, 7720, 7722, 8820, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976. Backhoe: 310C, 315C, 410B, 510B, 510C. Wheel Loader: 544E, 624E. Forage Harvester: 5720, 5730, 5820, 5830. Sprayer: 6100, 6600, 6700. Windrower: 2320, 2420, 3430, 3830. Replaces R82005GV, RE251028, RE25160, AR82005 (Item #: 110507, Ref: AR82005) $78.00

Ignition Switch, Used - For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, SE6920, 1654, 1854, 4120, 4610, 4710, 4720, 5055E, 5065E, 5070M, 5075E, 5076E, 5076EL, 5078E, 5080M, 5080R, 5080RN, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090M, 5090R, 5090RN, 5093E, 5093EN, 5100M, 5100R, 5100RN, 5101E, 5101EN, 5103, 5203, 5225, 5303, 5325, 5325N, 5403, 5415, 5415H, 5420N (s/n 248015-later), 5425, 5425N, 5525, 5525N, 5605, 5615, 5620, 5625, 5705, 5715, 5715HC, 5720, 5725, 5820, 6090MC, 6090RC, 6100, 6100D, 6100MC, 6100RC, 6105E, 6105M, 6105R, 6110, 6110D, 6110J, 6110L, 6110MC, 6110RC, 6115D, 6115M, 6115R, 6120, 6120E, 6120L, 6125D, 6125E, 6125J, 6125M, 6125R, 6130, 6130D, 6130J, 6130M, 6130R, 6135E, 6140D, 6140J, 6140M, 6140R, 6145J, 6150M, 6150R, 6155J, 6165J, 6170M, 6170R, 6180J, 6190R, 6200, 6205, 6210, 6210L, 6210R, 6215, 6220, 6220L, 6225, 6230, 6230 Premium, 6300, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6330 Premium, 6400, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6430, 6430 Premium, 6500, 6505, 6506, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6525, 6530, 6530 Premium, 6534, 6534 Premium, 6600, 6603, 6605, 6610, 6615, 6620, 6630, 6630 Premium, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7130, 7130 Premium, 7185J, 7200R, 7205J, 7210R, 7215R, 7220, 7225J, 7230, 7230 Premium, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7320, 7330, 7330 Premium, 7420, 7425, 7430 Premium, 7515, 7520, 7525, 7530 Premium, 7630, 7720, 7730, 7815, 7820, 7830, 7920, 7930, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8335R, 8345R, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R, 9370R, 9400, 9400T, 9410R, 9420, 9420R, 9420T, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9470RX, 9510R, 9510RT, 9520, 9520R, 9520RT, 9520RX, 9520T, 9530, 9530T, 9560R, 9560RT, 9570R, 9570RT, 9570RX, 9620, 9620R, 9620RX, 9620T, 9630, 9630T, Compatible with John Deere Combine(s) S550, S650, S660, S670, S670HM, S680, S680HM, S685, S685HM, S690, S690HM, T550, T560, T660, T670, W540, W550, W650, W660, Compatible with John Deere Harvester(s) 8100, 8200, 8300, 8400, 8500, 8600, Compatible with John Deere Sprayer(s) 4630, 4700, 4710, 4720, 4830, 4920, 4930, 4940, Replaces John Deere OEM number RE61717, RE264579, For a new version of this item use Item #: 163692, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436347) $14.70

Pulley - This is a two groove pulley used on multiple John Deere models. For 13mm (0.50 Inch) Belts. 81Mm (3.20 Inch) Outside Diameter, 17mm (0.669 Inch) Inside Diameter. Used on Alternators: A-890, 13143, 021000-7420, 100211-0080, 100211-0081, 100211-0290, 100211-0291, 100211-0292, 100211-0790, 290-402. It replaces John Deere Part Numbers R81507, R52161. Replaces Delco part numbers 7940-1107, 1149-P, 8126450, 115-030, 191002, 1B-5011, 379401107, 22025011 (Item #: 117432, Ref: R81507) $15.50

Speed Sensor - For John Deere tractor models 5620, 5720, 5820, 6010, 6020, 6100, 6110, 6120, 6130, 6200, 6210, 6215, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6410, 6415, 6425, 6430, 6500, 6506, 6510, 6520, 6600, 6605, 6610, 6620, 6630, 6715, 6810, 6820, 6830, 6910, 6920, 6930, 7130, 7220, 7230, 7320, 7330, 7420, 7425, 7515, 7520, Replaces John Deere OEM number AL176767, (Item #: 169716) $25.80

Starter - This is a 12 volt starter, clockwise rotation, 10 tooth drive, DD Delco 35MT Type. Rotatable DE housing. Note, check clearance on some JD models, may have interference issues on starter motor height when models have drop type manifold is used. For models 3010, 3020, 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320 Compact Tractor, 4430, 4440, 444C Indust/Const, 444D Indust/Const, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500A Indust/Const, 500C Indust/Const, 5400, 544C Indust/Const, 544E Indust/Const, 544G Indust/Const, 570 Grader, 570A Grader, 5720 Forage Harvester, 5820 Forage Harvester, 624E Indust/Const, 643D Feller Buncher, 644C Indust/Const, 644D Indust/Const, 646C Compactor, 690 Excavator, 690A Excavator, 690B Excavator, 693B Feller Buncher, 7020, 740A Skidder, 8430, 8440, 8450, 8640, 8650. Also replaces SE501446. (Item #: 112400, Ref: SE501444) $264.00

Engine Parts

No
Picture
Camshaft - For tractor models JD646, JD690, JD690A, JD740, 1177, 1188, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5440, 5720, 5730, 5820, 644C, 644D, 6600, 6602, 6620, 6622, 690B, 690C, 690CR, 693B, 693C, 740A, 762, 762A, 770A, 770B, 7700, 772A, 772B, 7720, 790, 790D, 792, 793D, 8430, 8440, 8450, 850B, 8640, 8650, 8820, 892DLC, 985, 9940, 9950. Camshaft replaces AR79610, AR71709, AR74144, AR100384, Casting Numbers R71529, R78316, R77259 (Item #: 160892, Ref: AR100385) $310.00

Inner Spline Transmission Friction Disc - For John Deere tractor models SE6010, SE6020, SE6100 (Power Reverser Transmission), SE6110, SE6120, SE6200, SE6210, SE6220, SE6300 (Power Reverser Transmission), SE6310, SE6320, SE6400 (Power Reverser Transmission), SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, SE6920, 1654, 1854, 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, 6010, 6020, 6090MC, 6090RC, 6095MC, 6095RC, 6100, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110, 6110J, 6110L, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120, 6120L, 6120M, 6120R, 6125J, 6125M, 6125R, 6130, 6130J, 6130M, 6130R, 6135M, 6135R, 6140J, 6140M, 6140R, 6145J, 6145M, 6145R, 6150M, 6150R, 6150RH, 6155J, 6155M, 6155R, 6155RH, 6165J, 6170M, 6170R, 6175M, 6175R, 6180J, 6190R, 6195M, 6195R, 6200, 6200L, 6210, 6210L, 6210R, 6215, 6215R, 6220, 6220L, 6225 (Power Reverser Transmission), 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6405 (Power Reverser Transmission), 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6430, 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515 (Power Reverser Transmission), 6520, 6520L, 6525 (Power Reverser Transmission), 6530, 6534, 6600, 6605 (Power Reverser Transmission), 6610, 6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7130, 7185J, 7200, 7200R, 7205J, 7210, 7210R, 7215R, 7220, 7225J, 7230, 7230R, 7320, 7330, 7400, 7405, 7410, 7420, 7425, 7430, 7500, 7505, 7510, 7515, 7520, 7525, 7530, 7600, 7610, 7630, 7700, 7710, 7715, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930, Replaces John Deere OEM number RE48092, RE321696, ID: 9-3/16" (240mm), OD: 11-5/8" (295mm), Thickness: .118" (3mm), Teeth: 95, (Item #: 122439) $32.40

Tensioner Pulley - For John Deere tractor models 5070M, 5080M, 5080R, 5090M, 5090R, 5100M, 5100R, 5620, 5720, 5820, 6010, 6020, 6110, 6120, 6205, 6210, 6220, 6310, 6320, 6410, 6420, 6420S, 6505, 6510, 6610, 6810, 6910, 6910S, Replaces John Deere OEM number AL157596, (Item #: 162009) $47.10

Tensioner Pulley - For John Deere tractor models SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620, SE6920, 4630, 5620, 5720, 5820, 6020, 6120, 6120L, 6130, 6215, 6220, 6220L, 6225, 6230, 6320, 6320L, 6325, 6330, 6415, 6420, 6420S, 6425, 6430, 6515, 6520, 6525, 6530, 6534, 6615, 6620, 6715, 6820, 6830, 6920, 6920S, 7220, 7320, 7420, 7520, Replaces John Deere OEM number 531091610, (Item #: 167788) $63.00

Transmission Disc - For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, SE6920, 1654, 1854, 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, 6010, 6020, 6090MC, 6090RC, 6095MC, 6095RC, 6100, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110, 6110J, 6110L, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120, 6120L, 6120M, 6120R, 6125J, 6125M, 6125R, 6130, 6130J, 6130M, 6130R, 6135M, 6135R, 6140J, 6140M, 6140R, 6145J, 6145M, 6145R, 6150M, 6150R, 6150RH, 6155J, 6155M, 6155R, 6155RH, 6165J, 6170M, 6170R, 6175M, 6175R, 6180J, 6190R, 6195M, 6195R, 6200, 6200L, 6210, 6210L, 6210R, 6215, 6215R, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6400, 6400L, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6430, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6520, 6520L, 6530, 6534, 6600, 6610, 6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7130, 7185J, 7200, 7200R, 7205J, 7210, 7210R, 7215R, 7220, 7225J, 7230, 7230R, 7320, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7810 (All With Powerquad Transmission), 7820, 7830, 7930, Replaces John Deere OEM number RE34786, RE273492, O.D.: 11.225", I.D.: 4.620", Thickness: .130", Teeth: 54, (Item #: 122435) $48.00

Exhaust System

No
Picture
Exhaust Pipe - For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, 5620, 5720, 5820, 6010, 6110, 6210, 6310, 6410, Replaces John Deere OEM number AL116902, RE214751, (Item #: 164136) $190.00

Fuel System / Air Intake

Check Valve - For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 4049R, 4320, 4520, 4720, 5065M, 5075M, 5076E, 5076EN, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090EN, 5090M, 5090R, 5093E, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5100R, 5105M, 5105ML, 5115M, 5115ML, 5115R, 5125ML, 5125R, 5215, 5215F, 5215V, 5220, 5225, 5315, 5315F, 5315V, 5320, 5325, 5415, 5420, 5425, 5515, 5515V, 5520, 5525, 5620, 5625, 5720, 5725, 5820, 6010, 6020, 6100, 6100D, 6110, 6110D, 6110E, 6110L, 6115D, 6120, 6120E, 6120L, 6125D, 6125E, 6130D, 6135E, 6140D, 6140J, 6155J, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6600, 6603, 6605, 6610, 6615, 6620, 6715, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 7220, 7320, 7420, 7425, 7520, 7525, Replaces John Deere OEM number AL117189, I.D. .315", O.D. .315", Length: 2.421", (Item #: 168920) $21.80

Fuel Hose - For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6920, 5620, 5720, 5820, 6010, 6020, 6110, 6110L, 6120, 6120L, 6140J, 6155J, 6205, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6310S, 6320, 6320L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6505, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6605, 6610, 6620, 6715, 6810, 6820, 6910, 6910S, 6920, 6920S, 7220, 7320, 7420, 7425, 7520, 7525, Replaces John Deere OEM number RE502248, Thread Size: 1/2" - 20 UNF, (Item #: 162600) $15.50

Fuel Injection Pump, Remanufactured, Bosch, PES6P-RND250, AR105419 - For John Deere tractor models 5820 (s/n 048542-earlier), 8630, 8640, Compatible with John Deere Engine (s) 6619A, Replaces John Deere OEM number AR105419, AR105418, AR105421, AR87662, AR88925, SE500121, SE500122, SE500123, SE500449, AR88922, Replaces Bosch manufacturer number PES6P-RND250, 9-400-231-106, 0-402-076-045, 9-400-231-107, (Item #: 200804) $2535.01

Fuel Injection Pump, Remanufactured, Denso, 190000-2500, AR88925 - For John Deere tractor models 5820, 8630, 8640, Compatible with John Deere Engine (s) 6619A, Replaces John Deere OEM number AR88925, AR105419, AR105418, AR105421, AR87662, SE500121, SE500122, SE500123, SE500449, AR88922, Replaces Denso manufacturer number 190000-2500, (Item #: 200828) $2535.01

No
Picture
Fuel Injection Pump, Used - For John Deere tractor models 5820, 8630, 8640, Compatible with John Deere Engine(s) 6619A, Replaces John Deere OEM number AR88925, AR105419, AR105418, AR105421, AR87662, SE500121, SE500122, SE500123, SE500449, AR88922, Replaces Denso Mfg nos 190000-2500, For a Remanufactured version of this part use Item #: 200828, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429487) $1675.01

Fuel Lift Pump - This Fuel Lift Transfer Pump is Tank Mounted. Used on 5215, 5215F, 5215V, 5315, 5315F, 5315V, 5415, 5515, 5515F, 5515V, 5603, 5615, 5615F, 5615V, 5620, 5625, 5720, 5725, 5820, 6020, 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6420S, 6515, 6520, 6520L, 6615, 6620, 6715, 6820, 6920, 6920S, 7220, 7320, 7420, 7520, SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620. Replaces AL168483 (Item #: 114880, Ref: AL168483) $66.00

Fuel Lift Transfer Pump - For John Deere tractor models 5215 (s/n 205094-earlier), 5215F, 5215V, 5315 (s/n 205094-earlier), 5315F, 5315V, 5620 (s/n 443511-earlier), 5720 (s/n 443511-earlier), 5820 (s/n 443511-earlier), 6020 (s/n 443675-earlier), 6120 (s/n 443675-earlier), 6120L (s/n 443675-earlier), 6215 (s/n 443675-earlier), 6220 (s/n 443675-earlier), 6220L (s/n 443675-earlier), 6320 (s/n 443675-earlier), 6320L (s/n 443675-earlier), 6415 (s/n 443675-earlier), 6420 (s/n 443675-earlier), 6420L (s/n 443675-earlier), 6420S (s/n 443675-earlier), 6515 (s/n 443618-ealier), 6520 (s/n 443618-ealier), 6520L (s/n 443675-earlier), 6615 (s/n 443618-ealier), 6620 (s/n 443618-ealier), 6920 (s/n 443618-ealier), 6920S (s/n 443618-ealier), 7220 (s/n 004517-034662), 7320 (s/n 004517-034662), 7420, 7520 (2003-2007), Replaces John Deere OEM number AL155607, (Item #: 127327) $72.00

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $13.60

Miscellaneous

Compressor, Air Conditioning - Replaces A6 compressor. For tractor models 4230, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430 4WD, 8440, 8630, 8640. Combine: 6600, 6620, 6622, 7700, 7720, 7722 9940. Crawler: 655B, 755B. Scraper: 762. Forage Harvester: 5200, 5400, 5440, 5460, 5720, 5820. (Item #: 172029, Ref: TY506793) $513.00

Sheet Metal / Body Parts

Gas Strut Spring Cylinder, Rear Window - For John Deere tractor models 5220, 5320, 5420, 5520, 5620, 5720, 5820, 6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6403, 6405, 6410, 6415, 6420, 6420S, 6505, 6510, 6520, 6600, 6603, 6605, 6610, 6615, 6620, 6715, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7220, 7320, 7420, 7520, Replaces John Deere OEM number AL114803, AL81578, AL174357, Rod Diameter: .315", Cylinder Diameter: .827", Piston Length: 8.27", Overall Length: 19.69", Rod Length: 19.448", Piston Stroke: 7.677", (Item #: 113163) $23.20

Gas Strut Spring Cylinder - Tilt Steering Wheel - For John Deere tractor models 5055E, 5065E, 5065M, 5075E, 5075M, 5076E, 5080R, 5080RN, 5082E, 5083E, 5083EN, 5085E, 5085M, 5090E, 5090EH, 5090R, 5090RN, 5093E, 5093EN, 5095M, 5095MH, 5100M, 5100MH, 5100R, 5100RN, 5101E, 5101EN, 5105M, 5105ML, 5115M, 5115ML, 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5620, 5625, 5720, 5725, 5820, 6090MC, 6090RC, 6100MC, 6100RC, 6110MC, 6110RC, Replaces John Deere OEM number SJ10177, RE212851, RE225080, Pin and Screws NOT included, (Item #: 164473) $116.00

Steering

No
Picture
Ball Joint, Steering - For John Deere tractor models 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, Replaces John Deere OEM number AL178287, RE212813, (Item #: 170406) $65.00

Tie Rod - Long - For John Deere tractor models 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, Replaces John Deere OEM number AL178288, RE212814, (Item #: 165477) $83.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.60

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.90

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.90

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.10

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 5820 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 5820 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$John Deere 5820 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 5820 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 5820 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere 5820 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere 5820 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$John Deere 5820 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.00

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00