FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere BR Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Return Spring - For tractor models 50, B, BO, BR. (Item #: 125769, Ref: B228R) $5.98

Clutch

Clutch Facing - Pulley clutch facing. Floating: B to 200999, BR, BO. 7-7/8 outside diameter, 4-7/8 inside diameter, 1.5 wide, .15 thick. For B, BO, BR (Item #: 105722, Ref: B158R) $17.00

Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Item #: 126143, Ref: A1197R) $9.00

Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Item #: 114893, Ref: D2031R) $21.30

No
Picture
Clutch Pulley Cover - This clutch pulley cover fits the following tractor models: B up to serial number 200999, BO, and BR from serial number 325000 and up. It measures 10 inches in diameter. (Item #: 105724, Ref: B164R) $39.90

Cooling System

Fan Friction Washer - For John Deere tractor models ANH, AO (s/n 264644-later), AO, AR (s/n 264644-later), AW, B, BN, BNH, BO (s/n 334150-later), BR (s/n 334150-later), BWH, D (s/n 30400-later), G (s/n 13910-later), GH (s/n 13910-later), GM (s/n 13910-later), GN (s/n 13910-later), GW (s/n 13910-later), H (a/n 50499-earlier when converted to friction style fan drive), HNH (a/n 50499-earlier when converted to friction style fan drive), HWH (a/n 50499-earlier when converted to friction style fan drive), 50, 60, 70, 520, 530, 620, 630, 720, 730 (gas / diesel / LP), Replaces John Deere OEM number D399R, R105808, 3-1/2" O.D., 1-1/8" I.D., 1.100" thick, (Item #: 115008) $6.10

Fan Shaft Bearing - This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Item #: 172930, Ref: JD7654) $38.60

Lower Water Pipe - For tractor models BO, BR, H from SN# 1000-26999. Lower Water Pipe. (Item #: 179107, Ref: B760R) $46.10

Radiator Cap - With Gasket for unstyled models: A, AO, AR, B, BO, BR, D, (G SN# : 4251-12999), GP. Also replaces AA795R. (Item #: 182928, Ref: AD86R) $114.28

$John Deere BR Radiator Hose - Bulk 3 x 1-7\8 inch$
Radiator Hose - Bulk 3 x 1-7/8" - For John Deere tractor models B, BN (s/n B60000-later), BNH (s/n B60000-later), BO, BR, BW (s/n B60000-later), BWH (s/n B60000-later), 520, 530, Compatible with John Deere Combine (s) 105, Replaces John Deere OEM number H23740, B77R, Replaces Case IH OEM number 407007R1, I.D. (A): 1-7/8", O.D.: 2-1/4", Length: 3', For Hose Clamp use Item #: 130455, (Item #: 152028) $20.80

No
Picture
Radiator Strap - For tractor models: 50, 520, 530, B, BO, BR. (Item #: 182810, Ref: B398R) $15.90

$John Deere BR Wire Hose Clamp - 2-13\32 inch to 2-17\32 inch$
Wire Hose Clamp - 2-13/32" to 2-17/32" - For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 520, 530, Replaces John Deere OEM number B78R, 2-13/32" - 2-17/32" (60mm -64mm), Ideal for 2-1/2" O.D. hose, (Item #: 130433) $8.80

Decals and Emblems

Decal Set - Decal Set for John Deere Model BR Unstyled only. (Item #: 102358, Ref: JDBR1) $44.60

Decal Set - Decal Set for John Deere Model BR Styled only. (Item #: 183558, Ref: R0816) $43.80

Vinyl Decal Set - For John Deere tractor model BR (Unstyled), Mylar decal set use Item #: 102358, (Item #: 102298) $80.00

Drive Train

Inner Rear Axle Seal - This inner rear axle seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 50, B, BN, BNH, BW, BWH, BWH40 (Sn: 60000 and up) ], BO, BR (Sn: 329000 and up). Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Item #: 106642, Ref: 834831M1) $12.20

Electrical System

Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Item #: 150259, Ref: 2348944) $28.70

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). Replaces AR12006, X5700, X5700B, X5700C. (Item #: 111196, Ref: AR12006) $99.00

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Item #: 103153, Ref: 1900119) $9.00

Generator Pulley - Used on John Deere models: A, B, G, 50, 60, 70, AO, AI, AR, BO, BR, D, H. This pulley fits Delco generator numbers: 1100955, 1101356, 1101371, 1101777, 1100506, 1100508, 1101390, 1101755, 1100955, 1101385, 1101401, 1101720, 1101756, 1101784, 1101377. The pulley measures 4.500 inches outside diameter, 0.507 inch belt groove width, 0.670 inch inside diameter, with a 0.127 inch keyway. This part replaces OEM B1030R (Item #: 179405, Ref: B1030R) $53.00

Governor Weight, Used - For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 70, 520, 530, 620, 630, Replaces John Deere OEM nos AB295R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499799) $76.01

Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Item #: 107080, Ref: X2938) $52.00

Magneto Cap with Gasket - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Item #: 105667, Ref: X5643) $57.00

Magneto Coil - For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. Replaces: AR12011R and X2766. (Item #: 105659, Ref: X2766) $99.00

Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Item #: 111196, Ref: X5700) $99.00

Magneto Condenser - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Item #: 179181, Ref: TP-AR31316) $23.90

Magneto, Early - This complete Magneto is used on tractor models: A up to serial number 487999, AI, AO serial number 251486-253520, AR serial number 251486-258799, B up to serial number 89999, BI serial number 325600-331499, BO and BR up to serial number 331499, G up to serial number 13000, D serial number 130700 and up, W, and WSP. The long prong measures 5/8 inch from the drive to the end of the lug. (Item #: 180165, Ref: XH477B) $512.00

Magneto, Late - Complete Magneto for models, A SN# 488000 and up, AO SN# 260000 and up, AR SN# 250000-251485 and 258800 and up, B SN# 90000 and up, BI SN# 331500 and up, BO and BR SN# 3315009 and up, H, G SN# 13000 and up, 50, 60. Short prong - 1/4 inch from drive to end of lug. (Item #: 178600, Ref: XH1042) $480.00

Magneto Point Set - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Item #: 112107, Ref: AR31317) $4.30

Magneto Tune-up Kit - For WICO model C. Tractor Models A, AO, AR, B, BO, BR, D, G, H, L, LA, LI. Contains Points, Condenser and rotor (Item #: 180662, Ref: R6846) $63.00

Spark Plug Wire Set - This is an Original Style with Cotton Braid Wire and copper core with RAJAH terminals has one end preassembled, Crimp Other End With A Crimping Tool. Replaces AA1222R, AA1890R, AB3480R, AB3481R, AB830R, AD1415R, AD1454R, AD1544R (Item #: 178937, Ref: R6591) $41.80

Spark Plug Wire Set - 2 cylinder spark plug wire set with 90 degree boots. For the following models: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, L, LA, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 128569, Ref: JDS643) $17.20

Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00

Voltage Regulator Conversion Kit - Used with VR1813 and VR1814 regulators when replacing Delco Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT (Item #: 184930, Ref: VRK1815) $64.00

Wico X Series Magneto Rebuild Kit - This Magneto rebuild kit is for the Wico X Series magneto. This magneto was used on model A, AH, AI, AN, ANH, AO, AR, AW, AWH, B, BI BN, BNH, BO, BR, BW, BW40, BWH, BWH40, D, G, GH, GM, GN, GW, R, W111, W113. Kit contains Cover gaskets, points, condenser, felt wipers, points and condenser screws, bearing seal, rear bronze bushing, oil slinger, impulse plate gasket, mounting gasket, dust cover unit gasket, ground connecter, inspection window, inspection window gasket. Depending on the magneto number, some of these parts may not be required. (Item #: 133558, Ref: ABC3723) $61.00

Engine Bearings

No
Picture
Main Bearing - .020" Oversize - Set - For John Deere tractor models B, BO, BR, Compatible with John Deere Engine (s) 175 (gas), 190 (gas), Bearing Size: .020" Oversize, Sold in complete sets, (Item #: 159184) $500.00

No
Picture
Main Bearing - Standard - Set - For John Deere tractor models B, BO, BR, Compatible with John Deere Engine (s) 175 (gas), 190 (gas), Bearing Size: Standard, Sold in complete sets, (Item #: 159183) $840.00

Engine Gaskets

Cork Flywheel Spacer Washer Oil Seal - This Cork Flywheel Spacer Washer Oil Seal has a 2.24 inch Inside Diameter, a 2.648 inch Outside Diameter and is .32 inch wide. Installs in oil slinger housing behind the flywheel. Used with AB251R or AB4109R spacer. It Fits: B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40. Replaces: B130R (Item #: 182948, Ref: B130R) $13.10

Oil Pump Gear Cover Gasket - For John Deere tractor models A (s/n 424025-later), ANH (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number B246R, 0.020" Thick, 4 Bolt Hole, (Item #: 164422) $8.40

Oil Pump to Crankcase Gasket - For John Deere tractor models A (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number B251R, 0.031" Thick, 3 Bolt Hole Pattern, (Item #: 164421) $11.30

Valve Cover Gasket - This valve cover gasket fits the following tractor models: B, BO, and BR. Replaces part number: B1498R. (Item #: 179408, Ref: B1498R) $20.10

Engine Rebuild Kits

Rebore Kit, .125 Oversize - Piston Kit For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Item #: 185832, Ref: R1981) $681.00

No
Picture
Rebore Kit, .125 Oversize - Piston Kit for B, BN, BR, and BW Serial number 60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1/2 inch bore plus .125. Contains Pistons, rings, pins and retainers. (Item #: 184994, Ref: R7356) $733.00

No
Picture
Rebore Kit, Standard - Piston Kit For B, BN, BR, and BW S#60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1/2 inch bore. Contains pistons, rings, pins and retainers. (Item #: R7353) $448.50

No
Picture
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B up to SN# 95999), BO, BR. (Item #: 184140, Ref: VTKJDB) $365.00

Engine Parts

No
Picture
Crankcase Vent Tube - For tractor models (BO, BR from SN# 325000 and up). (Item #: B1496R) $65.82

No
Picture
Cylinder Head - For tractor models (B unstyled SN# 1000-59999, (BO, BR SN# 325000-328999). Replaces B357R. Comes with Valve guides and Seats only. (Item #: AB311R) $548.90

Cylinder Head, Remanufactured, B1306R - For John Deere tractor models B (s/n B60000-B95999), BN (s/n B60000-B95999), BNH (s/n B60000-B95999), BO (s/n 329000-later), BR (s/n 329000-later), BW (s/n B60000-B95999), BWH (s/n B60000-B95999), Replaces John Deere Casting number B1306R, Engine 190 (gas), Cylinders: 2, Casting No. B1306R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200273) $790.01

Governor Shaft Bearing - This Governor Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Item #: 172930, Ref: JD7654) $38.60

Valve, Exhaust - For tractor models (B up to SN# 95999), BO, BR. Replaces B2878R. (Item #: 179501, Ref: B363R) $33.60

No
Picture
Valve Guide - For tractor models (B up to SN# 95999, BO, BR. Replaces AB4058R (Item #: 179496, Ref: B358R) $21.30

No
Picture
Valve, Intake - For tractor models (B up to SN# 95999), BO, BR. (Item #: 179500, Ref: B362R) $31.70

Engine Rings

No
Picture
Piston Ring Set - For John Deere tractor models B (s/n 59999-earlier, With 2-Cylinder Gas Engine), BO (s/n 328999-earlier, With 149 2-Cylinder Gas Engine), BR (s/n 328999-earlier, With 149 2-Cylinder Gas Engine), 4-1/4" + .030" with 4-3/16" Compression and 4-3/16" Oil, (Item #: 167088) $123.00

No
Picture
Piston Ring Set, .045 Overbore - For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".045 oversize. For pistons that use: 4 compression rings at 3/16 inch and 1 oil ring at 5/16 inch. Complete set for 1 engine. (Item #: R2030R) $130.36

Piston Ring Set - .045" Oversize - 2 Cylinder - For John Deere tractor models B (s/n 60000-95999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Replaces John Deere OEM number AB3727R, Standard Bore: 4.500", Ring Size: .045" Oversize, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For standard use Item #: 129168, (Item #: 129167) $142.00

No
Picture
Piston Ring Set, .090 - For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".090 oversize. For pistons that use: 4 compression rings at 3/16 inch and 1 oil ring at 5/16 inch. Complete set for 1 engine. (Item #: 129106, Ref: 2C4965-090) $227.00

Piston Ring Set - .090" Oversize - 2 Cylinder - For John Deere tractor models B (s/n 96000-200999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Standard Bore: 4.500", Ring Size: .090" Oversize, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For standard use Item #: 129167, (Item #: 129168) $186.00

No
Picture
Piston Ring Set, .125 Oversize - For model For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".125 oversize.. Piston Rings set for 1 engine fits pistons in rebore kit R1981. (Item #: 129107, Ref: 2C4965.125) $219.00

Piston Ring Set - Standard - 2 Cylinder - For John Deere tractor models B (s/n 60000-95999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Replaces John Deere OEM number AB3982R, Bore: 4.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For .045" use Item #: 129168, (Item #: 130039) $148.00

Exhaust System

Stud, Manifold - 7/16" x 4-3/8". For tractor models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Item #: 178414, Ref: A126R) $10.80

Stud, Manifold - 7/16" x 4". For tractor models (B from SN# 6000 and above), (BO, BR from SN# 239000 and up). Uses R5294 nut. (Item #: 178412, Ref: B1314R) $6.50

Stud Nut, Manifold - Original 7/16 inch style with oversized shoulders. Replaces 10A1052, 17890A, 30-3462161, 369065X1, 50A1008, 915834. For the following tractors: A, B, AI, AR, BO, BR, H (Item #: 183464, Ref: R5294) $1.70

Fuel System / Air Intake

3-Way Fuel Valve - For tractor models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Item #: 121905, Ref: AB609R) $84.00

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. Fits B SN# 60000 and up, BR-BO SN# 329302 and up, H, 50, 520 and 530. For clamp style air cleaners, not clip style. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.60

Carburetor - This carburetor is built to replace the Marvel Schebler DLTX10, DLTX34, DLTX67, DLTX73. Replaces John Deere part numbers AB237R, AB2711R, AB3470R, AB3533R, AB3740R. Note: Choke lever is for electric start tractors. (Item #: 149817, Ref: DLTX73) $565.00

Sediment Bowl Assembly - Cast top with glass bowl, all fuel style for use with 3-way valve. For tractor models AO, AR, B, BO, BR, D, G, GP, H. (Item #: 118722, Ref: AA499R) $47.80

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - 2" - For John Deere tractor models A (Styled and Unstyled), AI (Unstyled), ANH (Styled and Unstyled), AW (Styled and Unstyled), B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G (Styled and Unstyled), GH (Styled and Unstyled), GM (Styled), GN (Styled and Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel), Compatible with John Deere Combine (s) 55, Replaces John Deere OEM number AA519R, (Item #: 121909) $5.20

No
Picture
Speed Control Rod - For tractor models: BO, BR. (Item #: 179974, Ref: B791R) $31.30

Gauges

Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Item #: 150259, Ref: R3803) $28.70

Lights

No
Picture
7 Inch Teardrop Light Lens - For A, AO, AR, B, BO, BR, D. 7 Inch Teardrop Light Lens. THIS IS LENS ONLY. Like original has "GUIDE" NAME. (Item #: 150692, Ref: B1725R) $24.90

Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Item #: 105318, Ref: AD2835R-6V) $30.60

Headlight, 12 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Item #: 178399, Ref: AB3145R) $107.00

Headlight, 6 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Item #: 125712, Ref: AB3144R) $91.00

Light Lens - For 7 inch Teardrop Lights. For tractor models A, AO, AR, B, BO, BR, D. Replaces: B1725R (Item #: 150692, Ref: R4242) $24.90

$John Deere BR Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Item #: 150699, Ref: TLBULB12V) $0.50

Miscellaneous

Umbrella Bracket Assembly - For tractor models A, AO, AR, B, BO, BR, D, G, GP, H, L, LA, LI. (Item #: 179958, Ref: F517A) $62.00

Oil System

Engine Oil Pump Strainer Screen - Used on John Deere: A Serial Number 424025-487999, B up to Serial Number 95999, G, AO Serial Number 251486-259999, AI Serial Number 251486-259999, AR Serial Number 251486-259999, BO, BR. (Item #: 164415, Ref: AB284R) $48.20

Paint

No
Picture
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102408, Ref: TP215GAL) $60.00

No
Picture
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102407, Ref: TP215QT) $23.30

No
Picture
Paint, Classic Green, Spray Can - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP215SP) $10.10

PTO / Driveline

PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Item #: 152182, Ref: 71701C1) $5.10

PTO Seal - This PTO seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. For tractors equipped with PTO shield and flipper guard casting #B1679R. It Fits: A, AN, ANH, AW, AWH (Up to Serial Number 487999), AO, AR (Serial Number 258330 - 259999), B, BN, BNH, BW, BWH (Up to Serial Number: 149699), BO, BR (Serial Number 331077 - 333099). Replaces: AB2578R, 476838 (Item #: 153586, Ref: AB2578R) $15.50

Sheet Metal / Body Parts

Flywheel Cover Guard - Used on John Deere B serial number 60000 to 95999, 1939 - 1940 4 Speed. Replaces John Deere part number AB1856R. Fit to your tractor before painting. (Item #: 126486, Ref: AB1856R) $146.00

Step with Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104024, Ref: R2098) $64.00

No
Picture
Toolbox - For tractor models: (AO, AR up to s/n 271999), BO, BR. (Item #: 179511, Ref: AB689R) $55.00

Steering

Steering Wheel - 16" diameter, 3/4"-7/8" keyed, stepped hub, 3 flat spokes. For tractor models (B unstyled SN# 1000-59999), BR, BO. (Item #: 101436, Ref: S.67522) $50.88

Wheels

No
Picture
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: 2788) $18.20

No
Picture
Bearing Cone - Outer bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Item #: 172510, Ref: TP-JD7209) $9.40

No
Picture
Bearing Cone - Inner bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: TP-JD7222) $18.20

No
Picture
Bearing Cup - Outer bearing cup. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Item #: 180095, Ref: TP-JD7259) $6.00

No
Picture
Bearing Cup - BEARING CUP For 50, B, BO, BR (Item #: 180095, Ref: 15250) $6.00

No
Picture
Retainer - Retainer. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 180109, Ref: TP-B89R) $25.70

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.60

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.40

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $39.30

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $39.30

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

$John Deere BR Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$John Deere BR Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$John Deere BR Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere BR Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere BR Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$John Deere BR Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$John Deere BR Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$John Deere BR Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $60.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $22.70

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $51.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00