FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 204 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Brake Drum - Brake drum 16 inch outside dia 4 1/2 inch hub diameter. For tractors: TO35, MF35, F40, MH50, MF50, MF135 (except orchard), MF150, MF230, MF235 (except orchard), MF240, MF245 (except orchard). Industrials: 20, 20C, 20D, 30 turf, 35, 40, 202, 204, 2135, 2200, 3165. Uses two 182278M1 retaining screws per drum (not included). Replaces 181230M1, 827707M91, 827707M7, 827707M6, 827707M3, 825631M91, 822707M5, 8207707M4, 181230M1, 827707M1, 827707M4, and A827707M5. (Item #: 105637, Ref: 827707M5) $95.00

Brake Drum Retaining Screw - This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127. (Item #: 125739, Ref: 182278M1) $1.90

Brake Shoe Set - 4 brake shoes with linings bonded for 20, TO35, 35, F40, 50, 135, 150, M230, MF235 Standard and Orchard, MF245, (2 wheel set). Replaces 830480M93, 830480M92, 830480V93 (Item #: 105625, Ref: 830480M93) $89.00

Clutch

Friction Plate - Friction Disc, 5-1/4 inch outside diameter, 45 Internal Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. Replaces 1754345M1. For 204, 205, 304, 30B, 30E, 30, 40B, 40, 50A, 50C, 50D, 50E, 50. Replaces AR39128, 1754345M1, 1754345M2, 1804831M1, 2757328M1, 2757328V1. (Item #: 118132, Ref: 2757328M1) $11.10

Friction Plate - Friction Plate, 5-7/16 inch outside diameter, 50 External Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. For 204, 205, 30, 304, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E. (Item #: 155467, Ref: 1754344M1) $11.60

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility and turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $22.50

Cooling System

Fan, 6 Blade - 15.250 inch diameter, 1.0625 inch pilot hole, 1.750 inch bolt hole center to center. For tractor models 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. With Continental Gas Engine. (Item #: 121690, Ref: 181522M91) $64.00

Fan Belt - Outside length 42.5 inches long. For tractor models TO35 4 cylinder gas, 35 4 cylinder gas, 50 4 cylinder gas, 150 4 cylinder gas, MH50 4 cylinder gas, 2500 diesel, 202 4 cylinder gas, 204 4 cylinder gas, 2135 4 cylinder gas, 2200 4 cylinder gas, 302 4 cylinder gas, 304 4 cylinder gas, 135 4 cylinder gas. Replaces 509572M1GV, 181523M1, 189865M1, 191442M1, 509572M91, 509572V1. (Item #: 151990, Ref: 509572M1) $12.70

Fan Blade - This fan is 4 blade, 15 inch diameter, 1 1/16 inch pilot hole. For Continental Gas Engine models 135, 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. (Item #: 121691, Ref: 181522M91-4) $62.00

Hose Clamp - This hose clamp is used as a radiator hose and a air cleaner hose. It fits hoses with an outside diameter 1 3/4 inches to 2 inches. Check hose diameter before ordering. (Item #: 178164, Ref: 608287) $3.80

Radiator Hose, Lower - Hose, radiator lower. For Continental Gas Engine in tractors: TO35, MF35, MF135 industrials: 202, 204, 2135. 1.85 inch outside diameter, 1.50 inch inside diameter, 10.70 inches long. For 135, 202, 204, MF135, MF150, MF35, TO35. (Item #: 108421, Ref: 180783M1) $8.70

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 135, 20, 2135, TO35, 35, 230, (235, 245 except orchard), 240, 250, 253, 20C turf, 20D, 30E, 35, 40E, 202, 203, 204, 205. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.40

Thermostat - Thermostat. For Continental Gas Equipped tractors: 2200, 202, 204, 2135, 3165, F40, TO35, 50, 2500, 302, 304, 356, 135, 150, 165, 175, 180, 35, 65, 35, Colt, MH21, MH20, MH22, MH50. 160 degree. Comes with gasket. Replaces 830842M91, 836000V91, 836000M1, 830842M91, 830685M91, 184406V2, 181566M1 (Item #: 108422, Ref: 836000M91) $14.00

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $7.00

Upper Radiator Hose - New upper radiator hose with an inside diameter of 1.532 inch and 8.625 inch in length. This radiator hose fits multiple Massey Ferguson Tractor models. (Item #: 134505, Ref: 182345M1) $8.50

Water Pump Housing to Block Gasket - Used on Continental Engines, this gasket goes between the water pump housing and engine. Used on Massey Ferguson models: 20C, 202, 204, 2135, 30B, TE20, TO20, TO30, TO35, 135, 150, 230, 235, 245, 35, 50 (Continental Gas only) (Item #: 173646, Ref: 1750077M1) $2.30

Water Pump Pulley - For TO35, 35, 135, 202, 204, 230, 235, 245, 2135, 2200. All with CONTINENTAL Gas engines. (Item #: 111273, Ref: 1750081M1) $45.01

Water Pump, Remanufactured, Z129K42 - For Massey Ferguson tractor models TO35, 35, 50, 135, 150, 202, 204, 230, 235, 245, 2135, 2200, 2220, 2500, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, Compatible with Massey Harris tractor models 50, Replaces Casting number Z129K42, Impeller 2-3/4", Includes Mounting Gasket, Without pulley or hub, (Item #: 206975) $54.01

Water Pump, without pulley - This pump has a 2 3/4 inch impeller. For tractor models 35, TO35, F40, 35, 50, MH50, 202, 204, 2135, 2200, 2500 forklift, All with Z134 Continental gas engine. Includes gasket. Works with 1750081M1 or 1751852M1 pulley, depending application. Replaces original part numbers 830691M91, 830691M1, 830691M91-R, 830514M91. (Item #: 101970, Ref: 830691M91) $41.20

Water Pump, With Pulley - This Water Pump has a 2 3/4 inch impeller. For tractor models 35, TO35, F40, 35, 50, 135, 202, 204, 230, 2135, 2200, 2500 forklift, All with Z134 and Z145 Continental gas engine. Includes gasket. Replaces 1750081M1 pulley and 830691M91 pump. (Item #: 184540, Ref: 830691M91_WP) $105.00

Decals and Emblems

No
Picture
Decal Set - Hood only set for Massey Ferguson Model 204. (Item #: 183446, Ref: R3924) $61.00

No
Picture
Decal Set, Hood - For model 204. (Item #: 183446, Ref: MF204) $61.00

Engine Serial Number Tag, Blank - Comes with 4 rivets, black anodized aluminum, 3.885 inches long, 1.885 inches high, customer must stamp the number. For tractor models TO35, 35, F40, Early 135, 202, 203, 204, MH50, 2135. For all models with 4 cylinder Z134 Continental Gas Engine. (Item #: 178545, Ref: MFSNTAG) $33.70

Drive Train

Axle Housing Shim .004 - This Axle Housing Shim measures .004 inches thick, inside diameter of 4 1/2 inches and outside diameter of 7 1/2 inches. For 12 bolt housings on models: FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 172917, Ref: 183259M1) $4.10

Axle Housing Shim .016 - .016 inch thick shim. 12 bolt. For tractor models FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 173664, Ref: 183260M1) $3.90

Axle Shim - This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1. (Item #: 178176, Ref: 183261M1) $3.60

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.30

Bolt, Ring Gear to Case - 1/2 inch X 1 45/64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items. (Item #: 168810, Ref: 825776M1) $2.10

Countershaft - Countershaft, 6 speed and manual shuttle. 17/20 spline, 15 tooth. For the following tractors: 1080, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 235, 245, 30, 35, 50, F40, FE135, TO35. (Item #: 178325, Ref: 183054M92) $192.22

Countershaft - Countershaft, 6 speed transmission. 20/17/10 spline, 15 tooth, 12.750 inches long. For the following tractors: 135, 202, 203, 204, 205, 2135, 2200, 3165 35, 50, 65, FE135, MH50, TO35. (Item #: 173663, Ref: 183085M1) $140.60

Coupling, Wheel - 5.00 inch long, 3 groove, 10 spline. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 178, 188, 202, 203, 204, 205, 2200, 35, 365, 50, 65, 765, F40, FE135, FE35. (Item #: 160182, Ref: 880069M2) $38.10

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Lock, Cam and Shaft Assembly - For tractor models 135, 150, 20, 202, 204, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135, FE35. (Item #: 173127, Ref: 190960M92) $58.00

Differential Lock Cap. - 10 lug. For tractor models FE35, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135. (Item #: 172279, Ref: 190963M1) $94.00

Differential Lock Coupler - 39 teeth, 10 lugs. For tractor models 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, FE135 Coventry. (Item #: 172311, Ref: 897036M1) $75.00

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Filter Screen - Filter screen, transmission. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182880, Ref: 1754633M1) $42.70

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $26.10

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $136.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $18.98

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $74.00

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $4.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.40

Instant Reverse Transmission Pump - For tractor models 204, 205, 303, 30, 30B, 30D, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 50F, 60, 2200, 2500, 4500. Replaces 1034964M91, 1754316M91, 530718M91, 530718M92. (Item #: 170901, Ref: 86516596) $302.00

Needle Bearing - Measures 1 1/4 inch inside diameter, 1-5/8 outside diameter, 3/4 inch wide. Replaces 1677724M1, 196076M1, 832775M (Item #: 180488, Ref: 196076M1) $22.10

Oil Trough Assembly, LH - For tractor models F40, FE135, FE35, 50, TO35, 150, 20, 202, 204, 20C, 20D, 2035, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. Replaces 4246537M1, 825774M2, 825774M2 (Item #: 173161, Ref: 825774M2) $45.40

Oil Trough Assembly, RH - Used with differential lock. For tractor models FE135, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. (Item #: 173346, Ref: 191138M91) $9.50

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $18.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $21.30

Planetary Pinion Carrier Assembly - 32mm gears, used with 18 tooth shaft. For tractor models (304 early), (175UK, 178UK with multipower transmission serial number up to 728921), (204, 205, 2200, 50 all with hydraulic shuttle transmission), (30 with instant reverse, early), (40 with instant reverse, late), (50A with instant reverse serial number up to DC1222), (2500 with instant reverse serial number up to 9A70308), (180 with 6 speed or multi power transmission serial number CW6805), (148, 168, 185, 188 all with 8 speed or multipower transmission). Replaces 887128AM91, 882503M91. (Item #: 172307, Ref: 1886634M91) $252.00

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.30

Planetary Thrust Washer - This Planetary Thrust Washer is for tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 3165, 35, 356, 50, 65, 85, 88, Super 90, F40, FE35, TO35. (Item #: 172988, Ref: 180414M1) $16.20

Power Input Shaft - Power Input Shaft with 6 speed transmission has 18 tooth, 10 spline, length of 14 inches. For tractor models 135, 150, 20, 202, 204, 20C, 2135, 2200, 230, 235, 245, 285, 35, 50, F40, FE135, FE35, TO35. Replaces 1669325M1, 180420M1. (Item #: 166908, Ref: 1669325M1) $128.00

Rear Drive Coupling - Drive coupling, differential, rear. For tractors: TO35, MF50, MF65 industrials: 202, 204 Work Bull, 203, 205, 356 Tractor shovel, 2200 Treever, 2135 utility. 5 inches long, 10 splines 1-1/4 inch and 2 inches long. Replaces 183088M1, 880069M1, 880069M2 (Item #: 160182, Ref: 183088M1) $38.10

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.30

Seal, Rear Axle Oil, Inner - This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.20

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $34.40

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $48.11

Trans Gasket Kit - Gasket set, transmission overhaul. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182662, Ref: 830979M93) $66.00

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $6.50

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.30

Electrical System

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $147.00

Battery Cable - Cable, battery to solenoid, 24 inches. For 202, 204, 35, 65, F40, Super 90. (Item #: 172373, Ref: 186827M1) $19.80

Coil, 12V - This 12 Volt Coil with internal resistor comes with bracket for Delco distributor with screw held cap. For tractor models 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50. (Item #: 105299, Ref: 189673M1) $18.00

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $14.00

Distributor - A complete distributor that comes with cap, points, rotor and condenser. It has a 9 tooth shaft gear. For tractor models TO20, TE20 with Continental Engine, TO30, TO35, 35 (to serial number 245932), F40, 50 to serial number 536248. (Serviceable for: 135, 202, 204, 2135, 2200 (early with 1112643 distributor and Z134 engine). Replaces 1111722, 1111740, 1112557, 1112570, 1112586, 181544M91, 181685M91, 181686M91, 182852M91, 829856M9. (Item #: 152856, Ref: 182852M91-TP) $139.30

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models TO20, TO30, TO35, 35, 202, 204, 302, 304, 50, 65, 85, 88, Super 90. Replaces 811735 Delco and 1750411M1. (Item #: 104554, Ref: 1750411M91) $8.50

Distributor Cap 4 Cylinder - For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, IND 202, 204, 302, 304, 356. This is a Delco style screw on cap. (Item #: 105569, Ref: 1024914M91) $10.30

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90. For Delco. Replaces 1509692M1 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320. (Item #: 104557, Ref: 21A443) $12.00

Distributor Cap 6 Cylinder - Distributor CAP For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50 (Item #: 105585, Ref: 1960810) $12.70

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $18.00

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.00

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.40

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $9.50

$Massey Ferguson 204 Ignition \ Light Switch$
Ignition / Light Switch - Used on Massey Ferguson 202, 35, 204, 65, Super 90, and 50 tractors, this is a 5 Position Switch. It has 4 Terminals with 2 keys. The post OD is 3/4 inches. Replaces 189527M91, 189527V91, 189527M91. This switch is used on Gas and LP equipped tractors. (Item #: 170613) $84.00

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $28.30

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.30

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $12.80

Solenoid Switch - Solenoid Switch, 12-volt. Three Post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractors: TO35, F40, MF35, MF50, MF65, MF85, MF90 Industrials: 202, 204, 302, 304, 256 utility gas and LP models. Replaces 182696M91, 182696M1. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

Spark Plug - Spark Plug 18MM Thread Diameter fits Continental Gas Engines in: TO20, TO30, TO35, 50, 65, 85, 88, S90, 135, 150, 165, 175, 180, 1100, 230, 235. Gas Industrials: MF35 Utility and turf, 202, 204, 302, 304. Massey Harris: Pony, 21, 22, 23, 30, 33, 44, 44-6, 44 Special, 101Jr. 333, 444, 555, 303, 402, 404. Replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs. (Item #: 111742, Ref: AL386) $3.20

Spark Plug Wire Set, Custom - No cutting or fitting required for these wires. These are custom made for the following 4-cylinder Continental Gas engines using Delco Distributors: Z120, Z129, Z134, and Z145. Used on tractors: TE20, TO20, TO30, F40, 135, 135 Deluxe, 150, 35, 50, MH50, TO35. Also used on INDUSTRIALS: 202, 204. (Item #: 113765, Ref: S.42779) $17.00

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $220.00

Starter Drive - Drive assembly. For tractors, except diesel: MF35, MF50, MF65 industrials: 202, 204, 302, 356. Services starter 1107226. For 202, 204, 302, 356, MF35, MF50, MF65 (Item #: 178979, Ref: 1019269M91) $90.00

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $14.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit, Basic - FOR DELCO DISTRIBUTORS WITH SCREW-HELD CAP. Ignition KIT with ROTOR For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65. (Item #: 105278, Ref: ATK10DSR) $10.70

Tune-Up Kit, Delco Screw Held Cap - Used on Massey Ferguson 4 cylinder Continental models 35, 50, 135, 150, 202, 204, 2135, 2200, 2500, all with Delco distributors with SCREW held cap. Contains point, rotor, condenser, cap, spark plugs, and spark plug wires. (Item #: 158889) $58.00

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Tune-up Kit, With Plugs - This 4 cylinder Tune-up Kit is for Delco Distributors with screw type cap. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, 202, 204, 302, 304, 356. Includes plugs, points, condenser and rotor. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $27.00

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. 4 Terminal: Light - Battery - Field - Armature (underneath base). Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Item #: 105581, Ref: 182548M92) $27.00

Engine Bearings

No
Picture
Cam Bearing Set - This cam bearing set is for the Z129 and Z134 engines in TO30, TO35, 35, F40, MH50, 50, 135 SPECIAL, INDUSTRIALS 202 and 204. Standard Set. (Item #: 107235, Ref: SH-683S) $65.00

No
Picture
Main Bearing Set, .010, Z134-Z145 Gas - Main bearing set .010 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107158, Ref: 837156M91) $125.00

No
Picture
Main Bearing Set, .020, Z134-Z145 Gas - Main bearing set .020 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107159, Ref: 830639M91) $112.00

No
Picture
Main Bearing Set, .030, Z134-Z145 Gas - Main bearing set .030 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107160, Ref: 830639-030) $141.00

No
Picture
Main Bearing Set, .040, Z134-Z145 Gas - Main bearing set .040 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 830516M91) $86.27

No
Picture
Main Bearing Set, .060, Z134-Z145 Gas - .060 inch. For tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: MS-202P-060) $133.98

Main Bearing Set, STD, Z134-Z145 Gas - Main bearing set STANDARD for tractors using Continental Z134 or Z145 gas engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107157, Ref: 837155M91) $104.00

Piston Pin Bushing Set - Bushing kit, 4-760916M1 pin bushings. For 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Continental Gas Engines. (Item #: 182637, Ref: 840708M91) $25.70

No
Picture
Rod Bearing, .002 - Connecting Rod Bearing, single .002 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106983, Ref: 830508M91) $25.30

Rod Bearing, .020 - Connecting Rod Bearing, .020 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Four required per engine. Sold per journal. (Item #: 106985, Ref: 830510M91) $14.00

No
Picture
Rod Bearing Set, .010 - Connecting Rod Bearing Kit, .010 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 185224, Ref: 830509M91) $95.00

Rod Bearing Set, .030 - Connecting Rod Bearing Kit, .030 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 183864, Ref: 830510-030) $49.00

No
Picture
Rod Bearing, Standard - Single rod bearing for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106982, Ref: 830486M91) $13.30

Engine Gaskets

Crank Seal, Front - Lip-Type. Fits Four Cylinder Continental Gas Engines. For 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35, Replaces: 1008597M1, 15287A, 843893M1, 850185M1. (Item #: 167998, Ref: 15287A) $9.60

Crank Seal, Rear - Lip-Type. Fits Four Cylinder Continental Engines. For 135, 202, 204, F40, MF135, MF150, MF165, MF35, MF50, MF65, MH50, TE20, TO20, TO30, TO35. (Item #: 106079, Ref: 1750216M92) $11.50

Crankshaft Seal Kit - Kit contains front and rear crank lip-type seals and gasket for rear and felt seal for front. For Continental Gas Engines: Z120, Z129, Z134, Z145. Tractor Models: TO20, TE20, TO30, TO35, F40, MF50, MF35, MF135, MF150, 202, 204. Replaces: 1500080M1, 15287A, 15288A, 1750112M1, 1750216M1, 1750216M92, 843893M1, 850185M1. (Item #: 173222, Ref: VPC5122) $24.50

Gasket Set - Valve grinding set. Used on Z134 or Z145 CID Four Cylinder Continental Gas engines For tractor models 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TO35. Does not include exhaust valve seals - Order separately. Contains 1750045M1 Manifold Gasket, 1750017M1 Head Gasket, 181528M1 Thermostat Body Gasket, 181526M1 Water Outlet Elbow Gasket, 2 - 11277X Cylinder Cover Stud Gaskets, 1750006M1 Vent Tube Gasket, 4 - 1750062M1 Intake Valve Seals, 1750002M1 Valve Cover Gasket. (Item #: 107248, Ref: 836287M91) $42.10

Head Gasket - Head Gasket, 4-cylinder Continental gas engine. For tractor models 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TO35. Does not include exhaust valve seals. (Item #: 109786, Ref: 1750017M1) $35.20

Rocker Cover Gasket - For tractor models TE20, TO20, TO30, TO35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, F40, 35, 50. All using Continental Z120, Z129 or Z134 gas engines. (Item #: 110187, Ref: 1750002M1) $6.50

Timing Cover Gasket - For tractor models F40, TO35, 35, 50, MH50, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500 all with Continental Z134 Engine. (Item #: 111985, Ref: 1750032M1) $3.40

Valve Cover Vent Gasket - This valve cover vent gasket is used on Ferguson, Massey Ferguson and Massey Harris Tractors with Continental Gas Engines. It replaces part numbers 1750006M1, Z129A204. (Item #: 173372, Ref: 1750006M1) $2.60

Engine Rebuild Kits

No
Picture
Basic Engine Rebuild Kit, Less Bearings - For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 202, 204, Kit Contains: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, For Basic Engine Rebuild Kit with Bearings use Item #: 184021, (Item #: 183956) $354.40

Basic Overhaul Kit, Less Bearings - Z134 - (NOT FOR Z145) Basic Engine Kit. Continental Z134 CID Gas Engine, 4 cylinder, 3 3/8 inch overbore. Contains sleeves, sleeve seals, pistons and rings, pins and retainers, gasket sets, crankshaft seals. For 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO35. (Item #: 130844, Ref: BEKM119-LCB) $434.00

Major Overhaul Kit with CRANKSHAFT - Overhaul Kit for Continental Z134 Gas Engine 3 3/8 Inch OVERBORE. Including New Crankshaft Kit. Includes - pistons, wrist pin bushings, piston rings, liners, connecting rod bearings, connecting rod lock nuts (where fitted), top and bottom gasket sets, main bearings, thrust washers, front and rear seals AND A NEW CRANKSHAFT. Wrist pin bushings must be machined and pressed in. FOR MODELS TO35, MF35, MF50, MF135 Special, F40, MH50 Industrial 202, 204 B-C. (Item #: 183992, Ref: EKMC132) $1339.01

Overhaul Kit, Less Bearings - Z134 - Engine Overhaul Kit. Contains sleeves, sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, intake valves and exhaust valves, valve keys, springs and guides. For 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO35. Does not include exhaust valve seals. Order separately. (Item #: 184881, Ref: EOK119-LCB) $616.00

Engine Parts

Camshaft - For Z120, Z129, or Z134 Continental Engines on TE20, TO20, TO30, T035, 135, 202, 204, 2135, 2200, 30, 35, 50. Replaces 1500098M1, 1750074M1, 1750293M1, 836543M91. (Item #: 110977, Ref: 836543M1) $150.00

Crankshaft - New Crankshaft only (bearings not included) for Continental Z129 and Z134 Gas Engines. For TO30, TO35, 35, 50, MH50, 135, 202, 204 . See our engine bearings category for prices and sizes. Also replaces 1750169M1. (Item #: 102110, Ref: 830686M91) $430.00

Crankshaft Pulley - For tractor models TO35, MF35, MH50, MF50, 65, 202, 204 with Continental Engine. 4 hole, spoked pulley with 7/16 inch holes, 2 3/4 inch center to center hole spacing. (Item #: 164737, Ref: 1750076M1) $104.00

Crankshaft Weight Washer - This Crankshaft Weight Washer is used on 35, 50, 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E. It replaces 31731515, 31731516, 733645M1, 733644M1 (Item #: 183801, Ref: 733644M1) $0.70

Cylinder Head - For tractor models 35, 50, (203 and 205 Industrials (All prior to serial number 1846220). Cylinder Head - Indirect Injection. Complete with Valves and Springs. Perkins A3.152. Replaces 3637784M91, 3638321M91, 731781M91, 743272M91, ZZ80058, E2046T9, M03-00-19, 58462, 68131, 82620, 86553, U5BD0024, ZZ80048. (Item #: 156259, Ref: 3637784M91) $437.00

Engine Backing Plate - This Engine Backing Plate is used on Perkins AD3.152 Direct Injection Engine with Lip Type Seal. It is also known as a Flywheel Housing Adapter Plate. It Replaces: Perkins number 37147974, Massey Ferguson 741401M1. Used on 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E (Item #: 165510, Ref: 741401M1) $156.00

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

Governor Assembly - Governor Assembly for Continental Engines in tractors: TE20, TO20, TO30, TO35, MF135, MF35, F40, MH50, MF50, MF150, Pony, 202, 204, 2135, 2200, 2500. Also fits: MF135, MF150, with Perkins gas. Replaces 1002849M91, 529737M1, 529737M91, 738440M91 (Item #: 118785, Ref: 529737M1) $109.00

Push Rod - This push rod fits the following tractor models: TE20, TO20, TO30, TO35, 35, F40, 50, 35, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, and 4500. All with the following Continental Gas or LP Engines: Z120, Z129, Z134, and Z145. 8.940 inch overall length, 0.250 inch outside diameter. Sold as a single rod and priced each. Replaces 1750058M1, Z120I-206. (Item #: 182470, Ref: MFS2420) $27.00

Ring Gear Nut, Flywheel - This nut is for the ring gear to case. Used with BOLT 825776M1. For models- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Item #: 173305, Ref: 891947M1) $1.50

Rocker Arm Assembly - For Continental Z120, Z129, Z134, Z145 Gas Engines in models TE20, TO20, TO30, 35, F40, 50, 135, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, 4500. With forged ends. Replaces: (1) 1750073M1 rocker arm shaft, (2) 354043X1 cotter pin, (2) 1755067M1 washer, (2) 1750124M1 oil plug, (2) 1750056M1 rocker arm short spring, (4) 1750067M91 right rocker arm assembly, (4) 1750066M91 left rocker arm assembly, (3) 1750057M1 long shaft springs and (4) 1750055M1 support brackets. (Item #: 126173, Ref: MFS129) $277.00

No
Picture
SINGLE Valve Guide - Z134, Z129 or Z120 Gas - SINGLE Valve Guide for 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Z134, Z129 or Z120 Gas Engines. MUST ORDER 8 for complete engine. (Item #: 108035, Ref: 830490M91) $2.30

Valve, Exhaust - Exhaust valve, key-type. For Continental Gas Z129 and Z134 engines in models 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price shown is for each. (Item #: 159420, Ref: 1750072M1) $11.00

Valve, Intake - Intake valve, pin-type for 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price is for EACH. MINIMUM ORDER IS 4. (Item #: 128687, Ref: 1750070M1) $8.20

Valve, Intake Stem Cap, Aftermarket, Pack of 4 - These intake valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.218 inches tall, and 0.316 inches inside diameter. They are replacing: 1750060M1, 830704M91, and Z120I-208 (Item #: 178138, Ref: 830704M91) $38.00

Valve Keys - Sold each. 2 used per valve. These are only used on Roto Type Exhaust Valves on Z120, Z129, Z134, and Z145 Continental Engines. This set will be enough for two engines in this application. Replaces original part numbers 1004512M1, 841370M91. (Item #: 108430, Ref: 46209D) $0.70

Valve Lock, Pin Type - Intake and exhaust valve lock, 1 used per valve. For tractor models TE20, TO20, TO30, F40, MF135, MF35, MF50, TO35, 202, 204 all with Z134, Z129 or Z120 Gas Engines with pin type valves. (Item #: 108429, Ref: 18291A) $2.10

Valve Spring - Valve spring for intake and exhaust. For Continental Gas Engines in models: 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35. Replaces 15P461, Y400I215, Y400I00215, 21176A, 21176AV, Y400I00215 (Item #: 108428, Ref: 840754M91) $3.20

Valve Stem Cap, Exhaust - Aftermarket - These exhaust valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.235 inches tall and 0.126 inches stem diameter. They are replacing: 1750071M1, 830705M91, and Z129I-206. (Item #: 182516, Ref: 830705M91) $34.80

Engine Pistons and Sleeves

No
Picture
Sleeve and Piston Kit - Sleeve and Piston Kit for 1 cylinder. For Continental engine with a 3 3/8 inch bore. Includes: piston, liner and rings. For tractor models 135, 202, 204, 35, 50, F40, TO30, TO35. All with Continental Z129, Z134 Gas Engine. (Item #: 108105, Ref: SK105) $101.00

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.40

Engine Rings

Piston Ring Set - Ring Set for a single piston. For Continental Z134 Engine. 3-5/16 inch standard bore, replacing original rings. Includes 3 compression at 1/8 inch and oil at 3/16 inch per cylinder. For tractor models 202, 204, F40, MF135, MF35, MF50, MH50, TO35. (Item #: 129085, Ref: 836097M91) $44.40

Piston Ring Set - Ring set for 4 pistons. For 3-3/8 inch overbore pistons. (3 compression 3/32, 1 oil 3/16). For tractor models 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. (Item #: 183921, Ref: PRS105) $118.00

No
Picture
Piston Ring Set 3 1/4 Bore - For 4 ring piston, 3 1/4 inch bore, 2 compression at 3/32 and 2 oil at 5/32. Complete Set for 4 cylinder Gas Engine. (Item #: 129089, Ref: 2C7582) $174.00

Exhaust System

Exhaust Pipe Horizontal - For 35, 135, 202, 204, 2135 and TO35 with horizontal exhaust on 135 w/ Perkins AD3.152. L-shaped configuration, 3 bolt inlet flange, 18 inch vertical length, 20 inch horizontal length, 1.5 inch outlet diameter. Also replaces 181600M91. (Item #: 115544, Ref: 181600M92) $44.80

Muffler - For tractor models (MF135 1964 to 1974), (MF35 1960 to 1964), 202, 203, 204, 205. With gas or diesel engines. Vertical or horizontal 3 inch inlet, 1 7/8 inch inlet inside diameter, 17 inch shell length, 14 1/2 inch outlet length, 2 inch outlet diameter, 34 inches overall, 4.25 inch shell diameter. (Item #: 102432, Ref: 181867M91) $41.80

Muffler, Vertical, Black Enamel - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 184783, Ref: S.43643) $74.00

Muffler, Vertical, Silver Finish - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 187422) $69.00

Vertical Muffler Pipe to Manifold Gasket - Exhaust Elbow Gasket. For tractor models TE20, TO20, TO30, TO35, 135, 150, 35, 50, 65, 230, 235, 245, 20, 202, 203, 204, 205, 20C, 2135, 30B, 30D. Also Replaces OEM number 827877M1, 180104M1, 4222475M1, 72080353. Priced each. (Item #: 101628, Ref: 3640488M1) $3.70

Fuel System / Air Intake

Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models TO20, TO30, TO35, 202, 204, 35. Replaces part numbers 15791A, 15793A, 1751275M1, 180201M1. (Item #: 111005, Ref: 311507) $11.98

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Note: Not for use with choke cable only choke rods. [Part No: 12566 will accept cable, slightly different spacing] (Item #: 113777, Ref: 181532M92) $110.00

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Cast Iron, like the original. (Item #: 185746, Ref: 533969M91) $213.00

Carburetor Elbow and Strainer - Elbow and strainer fits models 135, 150, 35, 50, F40, TE20, TO20, TO30, TO35, 202, 204, and 2135 models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. Replaces OEM numbers 1751172M91 and 1751212M91. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float - Fits Carter number UT27015, UT2223S, UT2418S, UT923S with Cast Iron Throttle Body, Carter number 21-121S. For tractor models TO35, 35, 50, 202, 204, 135, 2135, F40, MH50. (Item #: 122654, Ref: 354813R91) $36.70

Carburetor Kit, Basic - For tractor models 202, 204, 2135, F40, MF135, MF150, MF35, MF50, TO35. For Marvel Schebler TSX605, TSX683 and TSX882. (Item #: 112448, Ref: BK49V) $24.70

Carburetor Kit, Basic - This Basic Kit is used on TSX28, TSX55, TSX88, TSX155, TSX188, TSX248, TSX272, TSX312, TSX361A, TSX458, TSX605, TSX683, TSX882 - Includes: gaskets, needle, seat and throttle shaft. (Item #: 112353, Ref: BK48V) $26.60

Carburetor Kit, Basic - Carter carburetor rebuilt kit for tractor models TO35, 35, F40, MH50, 50, 202, 204, 2135. All with Carter UT2223S or UT2418S. Kit does not include shaft seals as they are not available. (Item #: 112354, Ref: BK201V) $31.40

No
Picture
Carburetor Kit, Comprehensive - For F40, TO35, 135, 150, 202, 204, 2135, 35, 50, all with Marvel Schebler Carburetors - TSX605, TSX683, TSX882. Comprehensive Carburetor Kit contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Tis C549AV) Does not include float. (Item #: 114404, Ref: C549AV) $31.00

Carburetor Kit, Comprehensive - For tractor models TO35, MF35, F40, MH50, MF50, MF135, MF150; IND. 202, 204, 2135. Repair kit for Marvel Schebler carburetors TSX605, TSX683 and TSX882. OEM carburetor numbers 181532M91, 183576M91, 194065M91 and 533969M91 (Item #: 114404, Ref: C549AV) $31.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX643, TSX882, TSX605. For the following tractor models: 35, 40, 50, 135, 204. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203821, Ref: 1608-CARB) $225.01

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $9.00

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Tank - With sender hole. Comes Primered. Also comes with blanking plate kit S.42904 if you are not using the sending unit hole. For the following tractors with Continental engines: TO35, MF35, MF 135, 202 and 204. Replaces original part numbers 189209M93, 189209M91, 189209V91. (Item #: 104099, Ref: 189209M91-93) $223.00

Fuel Tank - This Fuel Tank is used on 3 Cylinder Perkins Diesel and 3 Cylinder Perkins Gas Tractors. Used on 35, 135, 20, 2135, 202, 203, 204, 205. Replaces 897401M1, 897401M92, 897390M91, 897401M91, H897401M92 Uses fuel cap 1876534M1. FOR KIT WITH CAP AND SENDING UNIT USE PART NUMBER 189468M93. (Item #: 104100, Ref: 897401M1) $205.00

No
Picture
Fuel Tank Blanking Plate with Gasket - Used with our fuel tank when not installing a fuel gauge sending unit to blank off the hole in the tank. 35, 50, 135 Special, 202, 204, 2135, 2200, 135 Deluxe, 150, 235, 20C, 30B, 2500, 4500. (Item #: 183892, Ref: S.42904) $12.10

Sediment Bowl Assembly - Strainer assembly, for GAS tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88 industrials: 35, 202 to serial number 309328, 204 to serial number 343891, 302 to serial number 119700213, 304 to serial number 119750210, 356 to serial number 670001084. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch pipe thread (7/16 -24) female outlet, 1-1/4 inch long bowl. Replaces OEM numbers 0236986, 180141V91, 193995M91, 193995M92, 193995V92, 180141M91, 632948M92. (Item #: 105381, Ref: 2NAA9155B) $14.00

Sediment Bowl Assembly - Sediment bowl. Fits tractor models MH44, MH20, MH22, MUSTANG, MH30, MH33, MH55, MH81, MH82, 50, 165, 180, 135, 150, 175, 202, 204, 302, 304, 2135, 3165, 30, 20, 356. Replaces OEM Part Number 505475M91, 505472M91. Replacement bowl available as part S.65504. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly Glass Bowl - Glass bowl fits S.61581 sediment bowl. Top of bowl outside diameter is 2 1/8. For tractor models 50, 165, 180, 135, 150, 175, 202, 204, 302, 304, 2135, 3165, 30, 20, 356. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 12080G (Item #: 105364, Ref: 49923D) $3.30

Gauges

Fuel Sending Unit - This fuel sending unit has 5 mounting screw holes and 1 wire lead and is for tractor models Massey Ferguson 35, 50, 135, 200, 202, 204, 205-4, 302, 304, 2135 Continental Gas, MH50 with Diesel. Replaces original part number 189160M91. Includes 189605M1 gasket. (Item #: 104396, Ref: 189160M91) $43.00

Proofmeter Drive Assembly - For a DELCO Alternators and Generators. This improved design uses a steel drive gear (originals used a fiber gear). Proofmeter Drive Assembly mounts on original type generator. Fits TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 175, 180, 1080, 1100, Industrials: 30, 31, 35 Turf and Utility, 50, 2135, 2200, 2500, 3165, 202, 204. ALL GAS ENGINES. Includes housing, 2 drive gears and gaskets. 7/8 - 18 threads. Does NOT include cable. (Item #: 113771, Ref: 1751295M91) $26.51

Tachometer Cable - Tachometer Cable Assembly, 39 inch. Vinyl covered. It has a 7/8 Inch drive end and a 5/8 inch load end. For tractors: TO35 gas, MF35 gas, MH50 gas, MF50 gas, MF135 Continental Gas, MF150 Continental Gas, MF165 gas, MF175 Industrials: 30 gas, 35 gas utility and turf, 202, 204, 2135 gas, 3165 Continental Gas. Replaces: 1751284M91, 506331M91, 506334M91, 521596M91, 532426M92 (Item #: 121217, Ref: 506331M91) $16.60

Temperature Gauge - For Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 205, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1078125M91, 180727M91, 181512M1, 1850512M94, 881396M91, 899455M91, Replaces Allis Chalmers OEM number 70226966, Replaces Minneapolis Moline OEM number 10A21284, 10A2229, 15A9741, Replaces Oliver OEM number 100679A, Replaces White OEM number 30-3485587, 60" Capillary Tube, 2" Diameter, 5/8" -18 UNF Connector, (Item #: 108057) $21.20

Tractormeter - Fits (MF35 Turf and Utility Gas), 202, 204, (3165 with Continental Gas), (65 Utility Gas and Diesel) Replaces 193955M91. Tractormeter is illuminated. Gauge turns clockwise. (Item #: 104120, Ref: S.61467) $63.00

Hitch / Drawbar

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

Drawbar - Used on 135, 135 UK, 150, 165 UK, 165, 175 UK, 175, 178, 35 UK, 35, 35X, 50, 65 UK, 65, 765. Will also work on 235, 240, 245, 250, 202, 203, 204, 205 but is not exactly like the original. Replaces 872149M1, 189344M1, 0011091U91, 1690718M1 (Item #: 184798, Ref: 872149M1) $149.62

Drawbar Stay Assembly - Category 1. For tractor models 35, 135 UK, (50 low clearance), 20F, 202, 204. This is for quantity of 1. (Item #: 182648, Ref: 181986M1) $44.60

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9 (Item #: 111911, Ref: EC0N660A) $5.20

No
Picture
Leveling box fork - Leveling box fork 13.5 inch long, .75 inch thread, .75 pin hole (Item #: 182652, Ref: 897659M1) $34.20

Leveling Box Fork - A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Item #: 110971, Ref: 184358M1) $30.00

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $20.98

Leveling Rod, Left Hand - For TO35, 35, F40, MH50, 50, 135, 150, Ind: 202, 204, 2135, 3165. Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 182544M92, 182554M92, 182544M92, 1884720M1, 897661M1, 897661V1. (Item #: 111007, Ref: 182544M92) $45.00

No
Picture
Lower Lift Arm - This lower lift arm comes with category 1 ball ends. Replaces Right or left. THESE LIFT ARMS ARE 33 InchES CENTER TO CENTER OF BALLS, CHECK DIMENSIONS OF OLD ARMS BEFORE ORDERING, MAY NEED TO BE ORDERED IN SETS! For Models 202, 204, FE135, F40, TO35, 35, 35X, 50. (Item #: 170284, Ref: 957E555) $83.00

Low Link Pivot - Pivot Shaft for lower link. Threaded ends 5/8 inch NF and 5/8 inch NF, overall length 5-1/4 inches. For tractors: TO20, TO30, TO35, MF35, MF135, MF150 industrials: 2135, 3165, 202, 204. MF1130. Replaces 181229M2, 181229M1, 181229M4, 181229M5 (Item #: 166280, Ref: 181229M5) $12.90

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.80

Stabilizer Pin with nut and lockwasher - Category I. Length 2.625 inches, pin diameter .875 inches, thread .625 inches-18. Replaces Original Part Numbers 181777M1, 646101M1, 646101M2. (Item #: 111677, Ref: SBP75-WNL) $1.98

Swinging Drawbar Kit - Fits 135, 150, 235, 240, 245, 250, 202, 203, 204, 205 Industrial Tractors. (Item #: 116973, Ref: S.61494) $252.00

Hydraulic System

Adapter Plate Bushing, Set of 4 - Set of 4 Rubber Bushing for front mount hydraulic adapter plates. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 and 708639M91. For 1134, 1143, 1144, 1153, 1163, 1164, 1183, 24, 260, 33, 34, 43, 44, 44-0, 44S, 540, 54C, 62, 63, 63C, 64, 82, 83 NOTE: Order 1 for a set of 4. (Item #: 173266, Ref: 1400022M91) $22.60

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $19.80

Cross Shaft - 37 splines on ends, 42 splines in center, 2 inch bushing diameter used with 180910M1 lift arm and 181018M1 bushing. For the following tractors: 130, 135, 150, 165, 202, 203, 204, 205, 2135, INDUSTRIAL 25, 302, 304, 35, 50, 65, F40, MH50, TO35. (Item #: 160155, Ref: 184359M1) $80.00

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $11.00

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.40

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $440.00

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $4.60

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $10.70

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $115.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Pump - For tractor models (TO35 serial number 179304 and up), 35, (50 serial number 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. 10 spline w/1 3/8 inch diameter shaft. Horizontal safety valve. This pump is 7 3/4 inches wide, 5 1/2 inches high, 12 1/2 inches long. Shaft Length 6 1/2 inches. ***NOTE: various pumps were used on these models - verify configuration in picture. (Item #: 155591, Ref: 184473M93) $310.00

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

Hydraulic Pump Support Peg - Hydraulic Support Peg has no shoulder on the pin. Verify type before ordering. If a stepped pin is needed, order part number 898643M1. This Pin use gasket 180904M1, sold separately. Replaces 180905M1 (Item #: 167221, Ref: 180905M1) $16.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.60

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.90

Lift Arm - For tractor models 135, 175, 235, 230, 245, 202, 204, 203, 205, 302, 304, 2135, 3165, 2200, 30, 20, 40, 40B, 40C. Hydraulic Lift Arm, right or left. 51 Spline. Used with 897567M3 Cross Shaft REPLACES : 885445M91 Check Side Before Ordering Because Arm Is Used As RH On Some Models And RH and LH On Others (A) (Item #: 160183, Ref: 885444M91) $62.00

Lift Arm - For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Item #: 114032, Ref: 180910M1) $52.00

Lift Arm - This Lift Arm is 2.25 inches with 42 splines. It is 2.125 inches on both ends. For tractor models 135, 150, 165, 202, 204, 2135, 302, 304, 35, 50, 65, F40, TO35. Replaces 180970M2, 180 970M2, 180970M3, 353720X1, 365334X1, 376374X1, 70918887 (Item #: 168806, Ref: 180970M2) $82.00

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $29.90

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.30

Lift Cover - This lift cover is used on many Massey Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Item #: 173139, Ref: 3761903M91) $582.00

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - Cylinder, hydraulic lift for 3-1/8 inch diameter piston. For tractors: MF135, MF150, MF165, MF230, MF235, MF240, MF245, MF250, MF282 Industrials: 20, 20C, 20D, 30, 30E, 40 202, 203, 204, 205, 302, 304, 2135, 3165. Use with 1665737M91 piston with rings. Replaces 897560M1, 897560M2 (Item #: 163456, Ref: 897560M3) $128.00

Lift Cylinder - For tractor models 202, 203, 204, 205, (35, 50, 65, FE35, all early), TO35. Hydraulic Rockshaft Cylinder has 3 inch diameter, is 7.937 inches long. Used with 184443M91 piston and (3) 184447M1 rings. NOTE: BOLT PATTERN IS 3 3/4" X 3 3/8" WITH 9/16" NF HOLES. THE HOLE SIZES WERE CHANGED BY MASSEY FERGUSON. THE COVER MUST BE REDRILLED AND STUDS CHANGED. REQUIRES (2) 899257M1 9/16"X3" STUD (2) 899258M1 9/16"X4" STUD (4) 368749X1 NUTS - We do not stock these items but they should be available locally. (Item #: 115763, Ref: 184442M1) $93.00

Lift Cylinder - 3 inch Lift Cylinder for tractor models 135, 150, 165 with Pressure Control, 202, 203, 204, 205, 2135, 302, 304 (Late 35, 50, 65, FE35). This cylinder originally came with 1/2 inch studs and then later models used 9/16 inch studs. This part comes made for 1/2 in studs. Verify which you have. This will replace the 9/16 diameter studs if you purchase studs and bushings. We do not supply the studs or bushings. (Item #: 115418, Ref: 190859M1) $110.00

Lift Cylinder Piston, 3 inch - Piston is 3 inch (piston ring is available separately, see part number 184447M1). For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. (Item #: 112025, Ref: 184443M91) $35.00

Lift Cylinder Piston Ring, 3 Inch - Piston Ring for a 3 inch piston. For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. Three are typically used. Sold individually. Replaces 184447M1, 53202383, 830741M1 (Item #: 111673, Ref: 184447M1) $4.40

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Item #: 184692, Ref: 1665737M91) $47.90

Lift Piston Rod - For tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 35, 50, 65, FE135, FE35. Lift piston rod is 7 3/4 inches. (Item #: 170854, Ref: 191211M1) $18.10

Lift Pump Adapter Plate - For 35, 150, 65, 135, 50, 235, 245, IND: 20, 20C, 30, 30B, 30D, 35, 40, 50, 202, 203, 204, 205, 2135, 2200. Front Mounted Hydraulic Pump Adapter Plate. 5 1/4 inch diameter with 3 bushings, mounting holes 3 3/8 inch on center, 3/4 inch left hand threaded center hole. (Item #: 118288, Ref: 704812M93) $68.00

Lift Pump Camshaft - For tractor models FE35, TO35, 135, 150, 165, 175, 202, 202, 204, 205, 302, 304, 3165, 35, 50, 65, 2135 TURF UTILITY NARROW. This camshaft has 10 spline and 1.3 Inch REAR SPLINE LENGTH. (Item #: 180715, Ref: 181993M91) $150.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $13.50

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $59.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $9.80

Lift Pump Drive Shaft - Drive shaft with coupler attached. For front mounted hydraulic pump drive, 11-3/8 inch overall length, adapter end 3/4 inch left hand threads, coupler end 3/4 inch round bore with 3/16 inch keyway. For tractors: MF135 Orchard Industrials: 20, 35 utility, 202 serial number 30315. (Item #: 168962, Ref: 704997M92) $148.00

Lift Pump Filter - Filter element is top mount. 2-7/16 inch outside diameter, 1-29/32 inch inside diameter and 4 inches long. For tractors: MF35, MF50, MF65, MF85, MF88, MF90, MF1080 industrials: 202, 203, 204, 205, 302, 304, 2135, 2200, 3165. Also the following tractors with pumps having 10-spline camshaft: MF135, MF150, MF165, MF175, MF180 Industrials: 20, 30, 31, 40, 302, 304. For MF1100, MF1105, MF1130. Replaces 521451M1, 185551M92 (Item #: 172545, Ref: 521451M1) $10.60

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Overhaul Kit - For tractor models (135, 150, 165, 175, 178, 180, 20, 202, 203, 204, 205, 2200, 30, 302, 304, 3165, 40) FE135 Coventry, 2135 Turf Utility Narrow. Hydraulic Pump Overhaul Kit contains (2) A897491M1, (2) A-1860038M1, A-180924M2, A-180925M2, (4) A-897493M1, A-1810684M92, A-1810680M92, (2) A-1810678M91. 4 holes, 3/8 inch mounting bolt holes with .438 inch oil hole. (Item #: 173095, Ref: 556602) $223.00

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $5.70

Lift Pump Valve Assembly. - For tractor models 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, (40, 50 ALL INDUSTRIAL MODELS). Replaces 1660209M92. (Item #: 179514, Ref: 1862486M96) $45.65

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $81.00

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $4.20

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $21.60

Transmission and Hydraulic Filter - Filter, hydraulic oil cooler, multi-power transmission. Measures 4.5 inches long, 1 3/4 inch diameter with a 1 inch hole. For tractors: Super 90, MF135, MF165, MF175, MF180, MF1080, MF1100, MF1130 industrials: 30, 30B, 30E, 40, 50A, 50E, 50F, 204, 205, 302, 304. (Item #: 126305, Ref: 191855M4) $27.00

Lights

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $57.00

Headlight, 6 Volt, RH or LH - Light is NOT an original replacement. For: TO20, TE20, TO30, TO35. Painted light grey. Will also function on MF20, Super 90, 135, 150, 165, 175, 202, 203, 204, 2135, 302, 304, 35, 65, 85, 88, 95, 97, 98 Replaces 186141M91, 186142M91, 510436M91, 510437M91. (Item #: 113349, Ref: 2N13005C) $57.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Item #: 111241, Ref: 373662R91) $10.00

$Massey Ferguson 204 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. (Item #: 150699, Ref: TLBULB12V) $0.50

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.00

Tail Lite, License Light, Clear Glass Lens - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50. Uses Gasket FAA13447A, not included. (Item #: 1750664M1) $21.36

Tail Lite, License Light, Lens Gasket - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50.1750666M1 (Item #: 178109, Ref: FAA13447A) $4.50

Oil System

Oil Filter Adapter Kit, Spin On - Does not include filter. Order 113613 for the filter. For tractor models T030, TO35, 35, 40, 50, 135, 150, 202, 204, 2200, 2500, and MH50 with Z129, Z134 or Z145 Continental Engines. Engine Oil Filter Adapter Plate for spin on oil filter. Replaces: 1069954M91, 1051113M1, 1051114M1, 1051115M1 (Item #: 143112) $42.00

PTO / Driveline

PTO seal - Used as a transmission PTO main drive pinion shaft seal, with dual clutch 6-speed transmission. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces 195503M1, 195503V1. For the following tractors: 35, 50, 65, 20, 20C, 30, 150, 165, 175, 180, 202, 230, 203, 204, 235, 245 (Item #: 152783, Ref: 195503M1) $4.30

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $64.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Seats

Backrest Cushion - Backrest cushion: 185, 210, 220, (Davis)~ 202, 204, 1001 Fork Lifts. For 1001, 185, 202, 204, 210, 220 (Item #: 178303, Ref: 1753007M1) $62.00

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $81.47

Seat Bumper, Rubber - For use in a flip top pan seat (NOT a bucket seat), .957inch head diameter, .302 inch stem length, 1.283 inch overall length. For tractor models TO20, TO30, 35, 40, (50 up to serial number 514381), 65 diesel special, 135, 202, 204, 2135. Replaces TO434A. (Item #: 126664, Ref: 180289M1) $6.70

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $71.00

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $45.20

Sheet Metal / Body Parts

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $105.00

Fender - Less Toolbox - With ORIGINAL STYLE BRACKET. Fender comes with toolbox hole (NO TOOLBOX), must fit New/Used toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Add additional $150.00 to shipping due to weight. (Item #: 178722, Ref: S.43774) $318.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $104.00

Fender with Toolbox - Fender comes with toolbox, NOT assembled, must fit toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Additional $145.00 shipping due to weight. If you want 2nd matching fender without tool box hole, order S.66428. (Item #: 116087, Ref: S.43775) $328.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $1.10

Hood Latch Assembly - For tractor models MH50, MF50, 65, 85, 88, Super 90, 135, IND 20, 50, 50A, 70, 202, 203, 204, 205, 2135. Replaces 184779M92. (Item #: 114536, Ref: 194119M91) $18.50

Metal Toolbox, In-Fender Style - For tractor models: T035, MF35, 50, 135, Industrial 35, Utility 2135. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also replaces S.60010. (Item #: 116980, Ref: 180737M1) $59.00

Steering

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $11.50

Power Steering Cylinder Left - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 1662946M92, 1674491M92, 1673086M91, 3401240M91, 3401 240M91, 001403U91, 1885715M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91 repair kit. (Item #: 118573, Ref: 3401240M91) $128.00

Power Steering Cylinder Right - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 0011404U91, 001404U91, 1662947M92, 1673087M91, 1674492M92, 3401241M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91. (Item #: 118574, Ref: 3401241M91) $171.37

Power Steering Plate - Mounts under steering wheel nut, 2-1/2 inch outside diameter, 5/8 inch center hole with keyway, anodized red aluminum. For tractor models 35, 65, 85, 88, Super 90, Industrials 202, 203, 204, 205, 303, 404. (Item #: 126606, Ref: 183174M1) $19.80

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $582.70

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

$Massey Ferguson 204 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.00

No
Picture
Spindle, Left or Right - Spindle has a 11.187 inch vertical shaft that has a 1.5 inch diameter. For 202 after serial number 306677, 203 after serial number 659000300, 304 serial number after 242537, 205 after serial number 659100150. Spindle is reversible. The wheel bearing kit used for this spindle is part number WBKMF2. (Item #: 105016, Ref: 189751M92) $198.00

Spindle, Left or Right Side - The measurements on this Spindle are: A - 11.187 inches, B - 1.500 inches, C - 1.796 inches, D - 1.250 inches. Uses WBKMF3 Wheel Bearing Kit, 183086M1 Bushings, 196167M1 Thrust Washer and 387930S36 Spindle Nut (all sold separately). Fits both the left and right side on Massey Ferguson: 202 below serial number 306677, 203 below serial number 65900300, 204 below serial number 342537, 205 below serial number 659100150, 2135 below serial number 646992326. (Item #: 105017, Ref: 183016M92) $154.00

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $862.72

Steering Column Grommet - New Steering Column Grommet fits Massey Ferguson 35, 202, 203, 204 and 205 (serial number 204181 and up). Grommet measures 3.660 inches length, 3.085 inches width and 1.480 inches hole inside diameter. Early tractors use smaller grommet. (Item #: 126707, Ref: 186627M1) $17.40

Steering Cylinder Ball Joint, Female - Rod end ball joint, with internal threads. For Tisco universal power steering cylinder 192749M92. For tractor models 20, 202, 203, 204, 205, 2135, 35, MF135. 1/2 - 20 NF Thread. Also Replaces OEM 1754629M1 (Item #: 172886, Ref: 192749FT) $20.30

Steering Shaft and Nut Assembly - For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3/4 inches overall length. Replaces 1751666M1, 1751666M91. (Item #: 182854, Ref: 1751666M91) $204.00

Steering Shaft Assembly - For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3/8 inches Long. (Item #: 165143, Ref: 180538M91) $189.00

Steering Shaft Repair Kit - Repair kit for Steering Shaft. For Tractors with Power Steering. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. (Item #: 173253, Ref: SRK632AA) $46.00

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.80

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Tie Rod - For Massey Ferguson tractor models 20, 35, 135, 202, 203, 204, 205, 302, 304, 2135, Compatible with Massey Ferguson Construction and industrial models 202, Replaces Massey Ferguson OEM number 1754629M91, Diameter: 0.531", Length: 1.156", (Item #: 166505) $23.40

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $14.00

Wheels

Disc-Wheel Center (28 inch) - This disc is used on multiple, Ferguson, Massey Harris and Massey Ferguson Models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces original part number numbers 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1. Additional $35 shipping due to weight. (Item #: 149804, Ref: D9NN1036CA) $225.00

Dual Wheel Adapter - Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1 (Item #: 179639, Ref: 818017M1) $9.80

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $60.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $60.00

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $6.10

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.30

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $23.50

Wheel Bearing Kit - This front wheel bearing kit Includes 1 each: LM48548 (Cone), LM48510 (Cup), LM11949 (Cone), LM11910 (Cup), 18265 (Seal). For tractor models 1080, 1085, 135, 150, 165, 175, 180, 185, 202, 203, 204, 205, 20C, 230, 235, 245, 255, 265, 275, 285. Replaces 835965M91. (Item #: 102487, Ref: WBKMF2) $20.60

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 serial number up to 306677), (203 serial number 65900300), (204 serial number up to 342537), (205 up to serial number 659100150), (2135 up to serial number 646992326), 255, 265, 275, 285, 40. (Item #: 102488, Ref: WBKMF3) $38.00

Wheel Hub - For tractor models 175, 202, 203, 204, 205, 220, 30, 31, 3165, 40. Uses WBKMF3 wheel bearing kit, not included. (Item #: 160890, Ref: 519276M91) $194.00

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1, 180863M91, 764994M91. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $635.00

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.55

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.70

Wheel Stud Nut - Nut is 9/16x18 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.00

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.50

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.10

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.30

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $73.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $21.10

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.90

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $29.00

$Massey Ferguson 204 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 204 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$Massey Ferguson 204 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 204 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Massey Ferguson 204 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 204 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 204 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Massey Ferguson 204 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.00

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.48

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $77.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $91.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.90

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $71.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $71.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $263.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $119.41

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $907.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1109.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $71.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $313.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $103.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $410.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $72.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $26.20

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $63.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $33.10

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.50

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $56.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $129.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $63.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $11.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $2.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $143.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $164.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $16.50

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00