FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 231 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Accessories / Supplies

Engine Block Heater - For tractor models 135, 150, 230, 231, 235, 240, 245, 250, 253, 254-4, 282, 283, 298, 360, 364S, 399, 698. Engine Block Heater for 1 1/4 inch opening in block. 600 watts, 120 volts. (Item #: 120029, Ref: 19841A91) $75.00

Brakes

Brake Adjuster Spring - This Spring is 5-3/16 inches over all, has a 2-11/16 inch coil length and a 5/8 inch coil diameter. It is used on tractor models FE35, 135 UK, 231, 240, 20D, MF 35 UK. Replaces original part number 1850217M1 (Item #: 124543, Ref: 957E2035) $4.30

Brake Anchor Spring - This Brake Anchor Spring is 4 inches overall length, has a 2-3/8 inch coil length and 5/8 inch coil diameter. It is used on the following Ferguson and Massey Ferguson tractors: FE35, TEA20, TEF20, 135 UK, 165 UK, 178, 231, 240 175 UK, 20D, 50F, 50H, 60H, MF 35 UK. Replaces original part numbers 825064M1 and 1890319M1 (Item #: 178056, Ref: 957E2036) $5.00

Brake Drum - Brake drum 16 inch outside dia 4 1/2 inch hub diameter. For tractors: TO35, MF35, F40, MH50, MF50, MF135 (except orchard), MF150, MF230, MF235 (except orchard), MF240, MF245 (except orchard). Industrials: 20, 20C, 20D, 30 turf, 35, 40, 202, 204, 2135, 2200, 3165. Uses two 182278M1 retaining screws per drum (not included). Replaces 181230M1, 827707M91, 827707M7, 827707M6, 827707M3, 825631M91, 822707M5, 8207707M4, 181230M1, 827707M1, 827707M4, and A827707M5. (Item #: 105637, Ref: 827707M5) $95.00

Brake Drum Retaining Screw - This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127. (Item #: 125739, Ref: 182278M1) $2.10

Brake Pin Kit - Brake Pin Kit to service your brakes. For models TO20, TO30, TE20, 135 UK, 165 UK, 175 UK, 178, 20D, 231, 240, 240P, 240S, 35, 35X, 50F, 50H, 60H. (Item #: 105640, Ref: 1810029M91) $3.98

Brake Plate - This Brake Plate us used on multiple Massey Ferguson Tractors. Replaces 827143M91, 825040M1, 825040M2, 825041M1, 825041M2, 827143M92, 827143M94, 827143M95, 827143M96, 897042M1, 897042M2, 87089998. (Item #: 105639, Ref: 827143M95) $208.00

Brake Shoe Lining Set - For tractor models 135UK, 165UK, 175UK, 178, 231, 240, 241, 35X. Replaces 1810345M91, 1851062M91, 1851063M91, 202631, 3620602M91 (Item #: 105701, Ref: 1851062M91) $42.30

Brake Shoe Set - Includes 2 shoes with linings. 2 inches wide. One wheel set. Tractors: 135 UK, 148, 158 Indust/Const, 165 UK, 175 UK, 178 UK, 20 Indust/Const, 20C Indust/Const, 20D Indust/Const, 230, 231, 240, 240P, 240S, 241, 340, 35 UK, 35X, 50 Indust/Const, 50B Indust/Const, 50D Indust/Const, 50F Loader, 50H Loader, 50HX Loader, 550 UK, 60 Loader, 60H Loader, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces Massey Ferguson: 1810348M91, 1810517M1, 1810517M92, 3620602M91 (Item #: 179590, Ref: 1810517M91) $123.00

Handbrake Assembly - For UK built models with drum brakes. Handbrake Assembly. Replaces 898792M91, 898652M94, 898654M92, 899044M95, 345718X1, 353754X1, 354039X1, 898639M96, 898653M91, 892266M1, 892267M1, 892268M1, 892269M1, 898639M91, 898639M94 (Item #: 180568, Ref: 898639M96) $85.00

Handbrake Assembly - For Massey Ferguson tractor models 135 (UK), 231, 240, Compatible with Massey Ferguson Construction and industrial models 20F, 30E, 40E, Replaces Massey Ferguson OEM number 1473871M91, (Item #: 160572) $75.00

Handbrake Repair Kit - This kit replaces Massey Ferguson part numbers 892269M1, 892268M1, 892266M2, 892267M1, 898654M91, 898654M92. Used on 135UK, 165UK, 175UK, 178, 231, (240 between serial number 522354 and A20286), 250, 20F, 30E, 40E (Item #: 187555, Ref: 892269M1) $15.20

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $15.40

No
Picture
Clutch Alignment Tool - Dual Stage Clutch Alignment Tool with 1 1/8 inch by 10 splines and 1 5/8 inch by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35. (Item #: 119890, Ref: 1212-5955) $17.40

$Massey Ferguson 231 Clutch Alignment Tool - 1-1\8 inch x 21 and 1-5\8 inch x 25 Spline$
Clutch Alignment Tool - 1-1/8" x 21 and 1-5/8" x 25 Spline - For Massey Ferguson tractor models 20, 30, 40, 231, 231S, 240, 241, 241S, 243, 251XE, 253, 261, 263, 265S, 271, 271XE, 275, 281XE, 283, 285S, 290, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 533, 593, 596, 699, 2670, 2680, Replaces manufacturer number 8301145, Pilot Diameter: .670", 1st Spline: 1 1/8", 21 Spline, 2nd Spline: 1 5/8", 25 Spline, (Item #: 167411) $19.40

Clutch Disc - For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 1866042M93, 3599462M92, 887889M94, M887889HD6, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 135030) $91.00

Clutch Disc, Remanufactured - For Massey Ferguson tractor models 158, 178, 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 5 Pads, (Item #: 206722) $144.00

Clutch Disc, Remanufactured - For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Spring, Clutch Type: 5 Pads, (Item #: 206729) $181.01

Clutch Disc, Remanufactured, 1693883V91 - For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 241 (Engine s/n E12095 - later), 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693883V91, 1693883M91, 3701008M91, 3697208M91, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: 5 or 6 Reg Pads, (Item #: 206731) $207.15

Clutch Disc, Remanufactured, 1693884M91 - For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265S, 271, 271X, 271XE, 281, 281X, 281XE, 283, 285S, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4215, 4220, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693884M91, 048438T2, 3597096M91, 3597670M91, 3599459M92, 3599460M92, 3610274M91, 3610274M92, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 149696, (Item #: 206730) $120.01

Clutch Disc, Remanufactured, 1866042M93 - For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 1866042M93, 3599462M92, 887889M94, M887889HD6, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206723) $207.15

Clutch Disc, Remanufactured, 3599462M91 - For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231 (Engine s/n E12094 - earlier), 240, 250, 253, 261 (s/n D09002 - earlier), 263, 265, 270, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 3599462M91, 887889M94, 3599462M92, 1866042M93, 887889M91, 887889M92, 887889M93, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206721) $98.58

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $9.70

Clutch Kit - Our new 12 inch, double clutch kit contains: 12 inch, 10 spline, rigid drive disc (3599462M92); 12 inch 25 spline double pressure plate with light springs (3599463M92); pilot bearing (832960M3) and release bearing (892862M2); and clutch alignment tool. Replaces OEM numbers 3599462M92, 3599463M92. For tractor models 165, 175, 175 U.K., 178 U.K., 20D, 20E, 20F, 231, 240P, 240S, 250, 253, 261, 263, 270, 271, 275, 281, 282, 283, 285, 290 U.K, 30E, 40E, 670, 690. (Item #: 112310, Ref: 1212-1455) $410.00

Clutch Kit, 12 inch - Our new 12 inch double clutch kit contains: 12 inch, 25 spline double pressure plate assembly (3599463M92); 12 inch, 21 spline, rigid drive disc (3597670M91); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 20D, 20F, 231, 240P, 240S, 253, 261, 263, 265S, 271, 281, 285S, 30E, 360, 362, 365, 375, 383, 390, 390T, 40E. (Item #: 112312, Ref: 1212-1440) $464.00

Clutch Kit, 12 inch - Our new 12 inch double clutch kit contains: 12 inch, 25 spline, double pressure plate assembly with heavy duty springs (1868005M92); 12 inch, 10 spline, rigid drive disc (3599462M92); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 165, 175, 175 UK, 178 UK, 185, 20D, 20E, 231, 240P, 240S, 253, 261, 263, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 383, 390, 471, 481, 670, 690. (Item #: 112310, Ref: 1212-1490) $410.00

No
Picture
Clutch Kit - Dual Stage - For Massey Ferguson tractor models 231 (s/n E12094-earlier), 240P, 261 (s/n D09002-earlier), 275, 282, 283 (will not fit Brazil models), 290, Replaces Massey Ferguson OEM number 1867438M92, 1868005M91, 1868005M92, 3599464M92, 3610268M91, 3610268M92, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12 Heavy Coil Springs, Pressure Plate Hub: 1-5/8", Pressure Plate Splines: 25, Pressure Plate Type: Dual Stage, Flywheel Step: 1.560" - 1.565", Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: Woven, Kit includes: Pressure Plate, PTO Disc, Clutch Disc, Release Bearing, and Pilot Bearing, (Item #: 177067) $521.00

Clutch Kit, Remanufactured - For Massey Ferguson tractor models 135 (UK), 231, 240, 261, 270, 275, 282, 283, 290, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 40, 40E, Clutch Diameter - 12", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - 6 regular Pads, Pressure Plate Size - 12", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-5/8", Pressure Plate Splines - 25, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202057) $531.05

Clutch Kit, Remanufactured, 3700167M91 - For Massey Ferguson tractor models 231, 240, 243, 253, 261, 263, 265S, 350, 355, 360, 362, 365, 375, 383, 390, Replaces Massey Ferguson OEM number 3700167M91, 3697162M91, 3701007M92, 3701003M92, 3701003M91, M3701003K1, For Release Bearing use Item #: 116891, (Item #: 210040) $610.74

Clutch-Pressure Plate, Dual - Dual pressure plate, heavy springs, 12 inch with 25 spline 1 5/8 inch hub PTO disc. Replaces 1860005M1, 1868003M91, 1868005M91, 1868005M92, 3601268M91, 3610268M91, 3610268M92, 3610268V92, 1867438M91 (Item #: 163357, Ref: 3610268M91) $342.00

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.20

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.00

Clutch Release Fork - For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Item #: 179512, Ref: 886719M1) $47.40

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $9.70

Dual Clutch Kit - For Massey Ferguson tractor models 30, 165, 175 (U.K.), 178 (U.K.), 231, 240, 253, 261, 263, 270, 271, 275, 281, 282, 283, 285, 290 (U.K.), 670, 690, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 20D, 20E, 20F, 30E, 40, 40E, Replaces Massey Ferguson OEM number 1866042M93, 1867431M91, 1867438M91, 1867440M91, 330001346, 3405678M91, 3599462M91, 3599462M92, 3599463M91, 3599463M92, 3599463V92, 3611842M91, 887889M1, 887889M92, 887889M93, 887889M94, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-5/8", Pressure Plate Splines: 25, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: Woven, Includes pilot bearing, release bearing and alignment tool, For Release Bearing use Item #: 119890, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112311) $355.00

Lever - Clutch release lever, for split torque single clutch or dual clutch. For tractor models MF231, MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 industrials: 20D, 30E, 40E, 50E. Replaces 1810817M91. (Item #: 178543, Ref: 887898M1) $5.80

No
Picture
Pressure Plate - For Massey Ferguson tractor models 231, 231S, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240P, 250 (Used w/8-Speed Transmission), 261, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, Replaces Massey Ferguson OEM number 3599463M92, Replaces manufacturer number 230-0015-42, (Item #: 166040) $330.00

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models 231, 240, 261, 270, 271, 275, 281, 282, 283, 285, 290, 383, 390, 451, 471, 481, 573, 583, 2605, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Dual Stage, (Item #: 206861) $263.01

PTO Clutch Disc, Remanufactured, 3900378M91 - For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 250, 251XE, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 350, 355, 360, 362, 375, 383, 390, 398, 451, 471, 481, 533, 573, 583, 2605, Replaces Massey Ferguson OEM number 3900378M91, 1867386M91, 1486544M91, 1865836M91, 3478359M91, Clutch Size: 10", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206725) $96.01

Trans. Disc, 12 - Organic, rigid disc. Replaces 887889M94, 1.125 inch spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Item #: 159009, Ref: 3599462M92) $52.00

Cooling System

Radiator - Core size 15.375 inches wide, 18.50 inches high, 3 rows of tubes, 5 fins per inch. For tractor models 231, 240P. (Item #: 101801, Ref: 1660655M92) $257.00

Radiator Cap - This Radiator Cap is used on Massey Ferguson Models: 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 270, 275, 283, 285, 290, 298, 30D, 30E, 375E Brazilian, 390E Brazilian, 50E, 50EX, 550, 560, 565, 575, 590. It Replaces 1874445V93, 1874445M94, 1874455M93, 1874445M93, 1874445M93 (Item #: 165450, Ref: 1874455M93) $10.00

Radiator Hose Lower - Hose, radiator lower. For tractors: MF231, MF240 except with hydrostatic steering, MF250 industrials: 20D, 30E. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35 (Item #: 159310, Ref: 1860374M2) $9.00

Radiator Hose - Upper - For Massey Ferguson tractor models TO35 (s/n 204181-later), 35, 135 (UK), 230, 231, 240, 241, 250, 253, 265, 275, 565, 575, Replaces Massey Ferguson OEM number 186826M1, Replaces JCB OEM number CTJ3105, 10329404, Fits Engines: 4.236 and A4.236, ID: 1.375", ID: 1.437", Length: 6", For Hose Clamp use Item #: 130453, (Item #: 108423) $7.30

Shroud (Metal) - Fits Models: 231, 240, 250, Industrial 20D, 30E. 897760M93, 1861222M1, 1860470M91, 1885721M92, 1885721M93, 1860470M92, 1860470M93, 897766M92, 1885721M94 (Item #: 155789, Ref: 1885721M94) $52.00

Thermostat Body Cap - For 135, 20, 202, 203, 205, 20D, 20C, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 2500, 253, 30B, 30D, 30E, 30H, 35, 4040E, 4500. Thermostat Body Cap (Perkins Diesel) also replaces 37747581. (Item #: 155437, Ref: 731000M1) $34.64

Thermostat Housing - Thermostat housing also replaces 37766361. For tractor models 135, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 5830, 5830FC, 5860, 5870. Replaces 746835M1, 37766361, 37766362, 37766363, 737192M1. (Item #: 173276, Ref: 746835M1) $68.00

Water Pump Kit - This water pump repair kit fits the following tractor models: 2500, 20C, 20E, 20F, 203, 205, 2135, 30B, 30E, 30H, 40E, 135, 135UK, 148, 150, 154-4, 154-4S, 230, 231, 235, 240, 240P, 245, 250, 253, 254-4, 263, 340, 342, 350, 353, 353LX, 360 all with Perkins engines. It services pumps: 739527M91, 747542M91, and 742558M91. Replaces 731774M91 (Item #: 191242, Ref: 731774M91) $24.80

Water Pump - With Pulley - This new water pump includes pulley part number 735034M1 with 3.125 inch hub diameter and a 1 5/8 inch pilot. The pulley has a square fan pulley mounting pattern. For tractor models 35, 50, 135, 150, 203, 205, 235, 245, 240, 20, 20C, 20E, 20F, 2135, 230, 231, 240, 245, 253, 360, 154-4, 30B, 30D, 30E, 30H, 40E, 2500, 254-4 all with PERKINS AD3.152 or AG3.152 engines. This is a new water pump. Replaces 3641338M91, 3641823M91, 37711330, 739527M91, 747542M91, U5MW0023, 41312487, 4132159, 735034M1, 735034V1, 747542M9. (Item #: 150185, Ref: 3641823M91) $37.00

Water Temperature Gauge - For instrument panel on tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF283 except Brazil, MF290, MF298, MF2775 to serial number 9R2805 to serial number 9R0726 Industrials: 20D, 30E, 40E, 50E, 50F. For 20D, 30E, 40E, 50E, 50F, MF231, MF240, MF250, MF253, MF270, MF2775, MF2805, MF282, MF283, MF290, MF298. (Item #: 104117, Ref: 1877719M92) $21.30

Decals and Emblems

No
Picture
Decal Set - Hood only set for Massey Ferguson Model 231. (Item #: 183447, Ref: R3927) $49.00

No
Picture
Decal Set, Hood - For model 231. (Item #: 183447, Ref: MF231) $49.00

Emblem - For Massey Ferguson tractor models 231, 231S, 240, 241, 271, 275 (UK), 281, 283 (UK), 285S, 290 (UK), 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 9240, Compatible with Massey Ferguson Combine (s) 8780, Replaces Massey Ferguson OEM number 3701634T92, 3580033M91, (Item #: 114369) $16.40

Drive Train

Massey Ferguson 231 8 Speed Constant Mesh Transmission Parts

8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Axle Housing Shim .004 - This Axle Housing Shim measures .004 inches thick, inside diameter of 4 1/2 inches and outside diameter of 7 1/2 inches. For 12 bolt housings on models: FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 172917, Ref: 183259M1) $4.10

Axle Housing Shim .016 - .016 inch thick shim. 12 bolt. For tractor models FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 173664, Ref: 183260M1) $3.90

Axle Shim - This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1. (Item #: 178176, Ref: 183261M1) $3.70

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $23.80

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.92

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $57.00

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $10.70

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $11.80

Bearing Seal and Collar Kit, Rear Axle - Contains (1) shrink-on collar 180596M1 (3 inch x 2-1/4 inch x 11/16 inch), (1) axle bearing (cup 300975M1 and cone 195675M1), (1) inner axle seal 195678M2 (2-1/8 inch x 2-7/8 inch x 1/2 inch), (1) outer axle seal 195677M1 (2-3/4 inch x 3-5/8 inch x 19/32 inch). Fits where the above parts are used: TO35, F40, 133, 135, 135UK, 140, 148, 150, 20, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3 165, 340, 35, 35UK, 35X, 50, 550. Verify part numbers. Some of these models were build with more than one rear axle. (Item #: 182552, Ref: S.05948) $102.00

Bolt, Ring Gear to Case - 1/2 inch X 1 45/64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items. (Item #: 168810, Ref: 825776M1) $2.10

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $359.15

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $27.60

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Lock, Cam and Shaft Assembly - For tractor models 135, 150, 20, 202, 204, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135, FE35. (Item #: 173127, Ref: 190960M92) $58.00

Differential Lock Cap. - 10 lug. For tractor models FE35, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135. (Item #: 172279, Ref: 190963M1) $94.00

Differential Lock Coupler - 39 teeth, 10 lugs. For tractor models 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, FE135 Coventry. (Item #: 172311, Ref: 897036M1) $75.00

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $9.90

Differential Ring and Pinion Set - 9-7/8 inch Pinion Gear length. Differential, ring gear and pinion set. 37 and 6 tooth. For tractor models 30, FE35, TO35, 35, 35UK, 50, 135, 135UK, 230, 231, 235, 240, 245, 20, 20C, 20D, 2135, (3165 light duty) check pinion length. Replaces 1683757M91, 182115M91, 1885317M91, 1885317M92. (Item #: 116129, Ref: 531862M91) $306.00

Differential Ring Gear and Pinion - Ring Gear and Pinion - (9 3/8 inch Pinion). 6 and 37 teeth. For tractor models: 135, 135 UK, 230, 231, 235, 240, 245, 3165, 20, 2135, 30, 20C, 20D, MF 35, MF 35 UK, MF 50. Replaces 1683757M91, 182115M91, 1885317M91, 1885317M92, 531862M91. (Item #: 133763, Ref: S.40897) $353.00

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Item #: 163463, Ref: 1665962M91) $3.98

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.30

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $26.10

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $28.70

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $1.98

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5/8 inch, bottom hole 2 inches. Replaces K929631. (Item #: 124263, Ref: 1678565M2) $3.00

Gear Shift Cup and Lock Ring - This Gear Shift Cup (827690M1) and Lock Ring (827211M1) is used on Massey Ferguson 135, 135 UK, 231, 240, 250, 253, 360, 362, 375, 383, 390, 393, 396, 20D, 20E, 283 UK, 30E, 390T. Replaces 827690M1, 827211M1 (Item #: 173296, Ref: 827690M1) $32.90

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $26.40

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $35.70

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.28

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.20

Main Drive Pinion - 8 speed transmission, 18 teeth, 10 spline, 13.750 inches long. For tractor models 150, 20, 20C, 20D, 231, 235, 240, 240P, 245, (135 standard transmission). (Item #: 172344, Ref: 964926M3) $84.00

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $11.10

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $97.15

Oil Trough Assembly, LH - For tractor models F40, FE135, FE35, 50, TO35, 150, 20, 202, 204, 20C, 20D, 2035, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. Replaces 4246537M1, 825774M2, 825774M2 (Item #: 173161, Ref: 825774M2) $45.40

Oil Trough Assembly, RH - Used with differential lock. For tractor models FE135, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. (Item #: 173346, Ref: 191138M91) $9.50

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $18.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $21.10

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.30

PTO Driven Gear - For Massey Ferguson tractor models 230 (s/n 9A349239-earlier), 231, 235, 240 (s/n N01001-earlier), 240P, 245 (s/n 9A349239-earlier), Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, Replaces Massey Ferguson OEM number 532906M4, 32 Tooth, 21 Spline, Fits Tractors with Live PTO, (Item #: 166769) $125.45

PTO Input Shaft - For Massey Ferguson tractor models 230, 231, 240, 243, 250, 253, 255, 261, 263, 265, 275, 282, 283, 290, 340, 342, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 590, 4225, 4235, 4245, 4255, 4265, 4315, 4325, 4335, 4345, 4355, Replaces Massey Ferguson OEM number 1671705M1, 1671704M91, 1671705M2, 1671704M1, Replaces Landini OEM number 1860011M1, 1671705M1, 1671704M91, 16 Teeth, 25 Spline, (Item #: 166868) $114.98

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.70

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $21.70

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.50

Seal, Rear Axle Oil, Inner - This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.30

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Item #: 168885, Ref: 1860773M1) $51.00

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $48.11

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $0.80

Transmission Fill Plug - For tractor models TE20, TEA20, TO20, TO30, 35, 40, 50, 135, 231, 240, 250 2135. Replaces 768300M1, 180580M1 and 3799441M2. Plug has a 2.3 inch outside diameter flange. (Item #: 115163, Ref: 9N7010) $6.30

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.10

Electrical System

Alternator - 12 volt, 44 amp. For tractor models (231 1989-99 with 152 dsl), (261 1989-92). Replaces A124-44A. This is a Bosch replacement. Replaces 1075447M91, 7003559M1 (Item #: 114718, Ref: AMM0010) $178.00

Alternator - Alternator, Marelli, Internal Regulator. This Alternator Is Internally Regulated. Will not replace External Regulated Units. Mounting and Wiring Are Different. Replaces; Marelli A124-44A, A12444A14V44A. Massey Ferguson 7003-559-M1, 7003559M1. (Item #: 172357, Ref: 7003559M1) $237.00

Combination Light and Horn Switch - For Massey Ferguson tractor models 231, 240 (s/n A20286-later), 240P, 261, 271, 281, 282, Compatible with Massey Ferguson Construction and industrial models 20E, 20F, 25, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 1668816M2, 1425878M91, 1699034M1, 963757M2, 964248M1, 1668816M1, With Knob, 5 Terminal, (Item #: 121148) $12.00

Ignition Switch - Switch, starter and heat, 6 prongs, includes 2 keys. For tractor models 231, 240, 250, 282, 290, 360, 362, 383, (390T serial number up to B18009), 393, 3505, 3525, 20F, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H. Replaces 1446116M1, 1446116M91, 1874120M91, 1874120M93, 1874535M3, 1874535V3, 3387319M1, 34228, 3533928M91, 3536550M92, 3536550M93, 35670.1874120M91 (Item #: 111509, Ref: 3107556R92) $8.10

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $22.30

Oil Press Switch - Oil Pressure Switch. For tractors: MF154S, MF174S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF270, MF274-4, MF282, MF283 except Brazil, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF3050 to serial number V173002, MF 3060 to serial number V173002, MF 3070 to serial number V173002, MF 3090 to serial number V173002, MF3505, MF3525, MF3545, MF3630, MF3650 Industrials: 20D, 30E, 40E, 50E. Replaces 1423895M91, 1877721M92. For 750, 760, 850, 860. (Item #: 151010, Ref: 3599307M91) $8.50

Starter, RH Mount - New Lucas Style Starter Assembly 5 inch with solenoid, cold climate. For tractors: MF231, MF240, MF250, MF253, MF360 Industrials: 20D, 20E, 30H, 40E. Replaces 1691805M2, 1868283M5. Can replace 3597371M2, 1680065M3 and 3597426M2 Hitachi Starters on above models. Replaces Lucas 26365, 27546, 26411, 26344, 27540, 26273, 27571, 27584 (Item #: 156138, Ref: 3763363M91) $177.00

Switch - Switch, neutral safety, has blade type terminals. For tractors: MF25, MF130, MF231, MF240*, MF250*, MF270, MF290, MF298*, MF670, MF690, MF698, MF3505, MF3525, MF3545 industrials: 20D, 30E, 40E*. *Optional with 1679223M2. Also used for differential lock s (Item #: 164579, Ref: 3381094M1) $22.30

Switch With Keys - Switch, starter and heat, 6 prongs, includes 2 keys. For tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3680 industrials: 20D 1874535M3 (Item #: 111509, Ref: 3107556R92) $8.10

No
Picture
Turn Signal/Flasher Switch - For Massey Ferguson tractor models 231, 240, 240P, 261, Compatible with Massey Ferguson Combine (s) 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20E, 25, 30H, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 881670M1, Replaces manufacturer number AV103062, CV103062, (Item #: 174293) $19.50

Engine Bearings

No
Picture
Gasket - Steering Box - For Massey Ferguson tractor models 35, 35X, 135, 148, 230, 231, 240, 250, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 30E, Replaces Massey Ferguson OEM number 1891676M1, 1850038M1, 1893620M1, (Item #: 168940) $2.30

No
Picture
PTO Shaft Bushing - For Massey Ferguson tractor models 165 (UK), 230, 231, 235, 240 (s/n: A20286-earlier), 240 (S), 240P, 245 (s/n: 9A349239-earlier), 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 282, 283, 290, 360, 365 (s/n: B18009-earlier), 375, 383, 390, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 40, 40B, 40E, Replaces Massey Ferguson OEM number 532883M1, (Item #: 174198) $21.30

Sealing Ring - For Massey Ferguson tractor models 20, 30, 31, 35, 35X, 135, 148, 150, 165, 175, 178, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 298, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 420, 440, 492, 550, 565, 575, 590, 595, 670, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3699909M1, 907315M2, 3609471M1, 3699909V1, 186198M1, 2" O.D. x 3/32", (Item #: 165441) $3.98

Engine Gaskets

Rear Head Cover Gasket - For Massey Ferguson tractor models 20, 30, 35, 35X, 40, 50, 50A, 65, 80, 135, 150, 154, 154-4, 165, 230, 231, 235, 240, 245, 250, 254, 254-4, 255, 302, 304, 360, 364S, 399, 699, 1100, 1105, 1130, 1135, 2135, 2200, 2640, 3090, 3165, 3505, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Combine (s) 300, 510, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20, 40, 80, 203, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 4222004M1, 731128M1, , Compatible with Oliver tractor models 1850 Replaces Oliver OEM number 159070A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Replaces White OEM number 159070A, Replaces Perkins OEM number 36851416, 490485, (Item #: 113596) $9.20

No
Picture
Steering Shaft Seal, Felt - For Massey Ferguson tractor models 35, 35X, 133, 135, 140, 148, 158, 230, 231, 235, 240, 245, 250, 255, 260, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 30E, Replaces Massey Ferguson OEM number 1850020M1, 1850020V1, Power Steering, (Item #: 168938) $2.00

Timing Case to Block Gasket - Gasket for the timing case to block for tractor models Massey Ferguson 35, 135, 148, 230, 240, 250, 254, 254S, 255, 350, 353, 550, 363, and 253 with Engines A3.152 AD3.152 AT3.152 AT3.152.4 Replaces 36814119. Priced each. Price shown is for 2, sold only in multiples of 2 items. (Item #: 168423, Ref: 734238M1) $13.20

Engine Parts

Camshaft - Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Item #: 173283, Ref: 733507M1) $124.00

Camshaft Idler Gear - 90 tooth. For tractor models (135, 148, 150, 154-4, 154-4S, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 245, 250, 2500, 253, 254-4, 30b, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 550 all with A3.152 or AD3.152 gas or diesel engines), 5830, 5830FC, 5860, 5870, 6030FC. Replaces 31164362. (Item #: 172340, Ref: 731205M2) $82.00

Camshaft Timing Gear - 50 tooth, for engine type PE 144 A3.152/AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139 (Item #: 172327, Ref: 731203M1) $45.01

Crankshaft - This new crankshaft is for a Perkins engine using aLip Type Seal in AD3.152 and G3.152 engines, gas and diesel. All with casting number 31312701. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200. (Item #: 102113, Ref: 742827M91) $360.00

Crankshaft and Bearing Kit - Crankshaft Kit comes with standard main bearings, rod bearings and thrust washers. For Perkins AG3-152 Gas and AD3-152 Diesel Engines using 1 piece lip-type rear seal, keyed nose. Replaces U5BG0027, 742827M91, 3637399M91, 3637410M91. Does not come with weights. Fits 135, 230, 231, 240, 245, 250, 253, 360. INDUSTRIALS: 20, 20C, 40, 2135, 2200. (Item #: 185737, Ref: 3641825M91) $400.00

Crankshaft Weight Washer - This Crankshaft Weight Washer is used on 35, 50, 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E. It replaces 31731515, 31731516, 733645M1, 733644M1 (Item #: 183801, Ref: 733644M1) $0.70

Engine Backing Plate - This Engine Backing Plate is used on Perkins AD3.152 Direct Injection Engine with Lip Type Seal. It is also known as a Flywheel Housing Adapter Plate. It Replaces: Perkins number 37147974, Massey Ferguson 741401M1. Used on 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E (Item #: 165510, Ref: 741401M1) $156.00

Flywheel - This Flywheel with Ring Gear is Used for a 12 Inch Clutch. It is used on 231, 240, 250, 263, 360, 20D, 20E, 30E, 30H, 40E. Additional $25.00 shipping due to weight. Replaces 740681M91, 41115004 (Item #: 185837, Ref: 740681M91) $401.00

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

No
Picture
Freeze Plug - Verify OEM part number of 159312A, 7208009, 731356V1. For tractor models 300, 410, 510, 540, 550, 750, 760, 850, 860, 2500, 4500, 20, 200, 2135, 2200, 30, 302, 304, 3165, 40, 50, 70, 80, 1130, 1135, 135, 150, 154-4, 165, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 263, 2640, 2675, 285, 298, 3090, 35, 35X, 3505, 3525, 3545, 3630, 364S, 3650, 399, MH50, 65, 698, 699. (Item #: 172875, Ref: 731356M1) $1.40

Main Drive Gear - For Massey Ferguson tractor models 135, 150, 231, 235, 240, 245, 250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, Replaces Massey Ferguson OEM number 906468M1, 50 Teeth, (Item #: 165954) $39.98

Ring Gear Nut, Flywheel - This nut is for the ring gear to case. Used with BOLT 825776M1. For models- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Item #: 173305, Ref: 891947M1) $1.30

Shift Rail, 1st and Reverse, Used - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 431, 451, 471, 481, 543, 583, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180442M2, For a new version of this item use Item #: 172890, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460983) $24.76

Shift Rail, 2nd and 4th, Used - For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 431, 451, 471, 481, 543, 583, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 202, 203, 204, 205, 220, 302, 304, 2135, 2200, 2500, 3165, 4500, 6500, Replaces Massey Ferguson OEM number 180438M2, 1678866M1, For a new version of this item use Item #: 172896, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460982) $22.01

Tappet, Perkins Diesel - Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Item #: 165601, Ref: 731150M1) $8.80

Valve Spring Seat, Lower - Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $13.70

Valve Tappet Adjusting Nut - This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Item #: 184396, Ref: 353430X1) $2.90

Valve Tappet Adjusting Screw - This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Item #: 183828, Ref: 32151116) $14.60

Engine Rings

Piston - For Massey Ferguson tractor models 30, 50, 65, 135, 140, 148, 150, 154, 154-4, 155, 158, 165, 203, 230, 231, 233, 234, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 340, 342, 350, 353, 353LX, 360, 550, Replaces Massey Ferguson OEM number 3638405M91, 4224523Z91, 4224523M91, Number of Rings: 4, Chamber: 59.82mm, Compression Height: 61.57mm, Crown: 90.75mm, Height: 109.24mm, Pin: 31.75mm, (Item #: 169819) $67.00

Exhaust System

Exhaust Elbow - Exhaust Elbow has mounting bolts that are 2 5/8 inches center to center, and is 90 degree. The outlet outside diameter measures 2.120 inches for a 2 1/8 inch inside diameter pipe. Replaces 1693855M1, 1865534M1. (Item #: 119854, Ref: 1693855M1) $34.20

Exhaust Elbow - 6 inches - For Massey Ferguson tractor models 135, 148, 231, 240, 241, 250, Replaces Massey Ferguson OEM number 1865534M1, Vertical, 90 degrees, with spark arrest, (Item #: 158814) $26.50

Exhaust Manifold Elbow - Horizontal - For Massey Ferguson tractor models 231, 240P (Diesel), Replaces Massey Ferguson OEM number 7000805M1, Horizontal exhaust, For Manifold elbow gasket use Item #: 101626, (Item #: 101627) $44.50

Manifold - For (20D, 231) (135, 148, 240, 250, all with with AD3.152 Engine). Exhaust Manifold, 90 Degree Elbow. (Item #: 101625, Ref: 740221M1) $36.50

Manifold Gasket - Used on Perkins Engines with square center holes on the exhaust ports. It replaces original part numbers 4222050M1, 4222050V1, 735016M1. Priced each. (Item #: 101626, Ref: 735016M1) $1.00

Manifold To Elbow Stud and Nut - This Stud is 1-5/8 inches long with 3/8 UNF (Fine) Thread. It replaces 0826232, 731866M1, 731862M1, 734697M1, 10826403, 0826403, 0826439, 0826481 (Item #: 180454, Ref: 734697M1) $3.50

Muffler - Measures: 6-1/2 inch inlet length, 2-1/8 inch inlet outside diameter, 17-1/2 inch shell length, 26-1/2 inch outlet length, 1-5/8 inch outlet outside diameter, 50-5/8 inches overall length. For tractor models 20B, 20E, 230, 231, 240, 250, 255, 340, 342, 350, 352, 355, 372, (550 serial number 620661 and up). Replaces 1683796M1, 1661930M1, 1683796M2, 1688171M6, 1680260M2. (Item #: 120205, Ref: 1683796M3) $90.00

Muffler Pipe Gasket - Exhaust Elbow Gasket. Perkins Engines (Item #: 101628, Ref: 3640488M1) $3.00

Fuel System / Air Intake

Air Cleaner Assembly, Oil Bath - For tractor models (165, 50 with AD4.203 Perkins engine), (765 with AD4.212 Perkins engine), (168, 175 with A4.236 Perkins engine), (178, 185, 188 with A4.248 Perkins engine). Can be adapted to other applications. Replaces 001210V91, 001210U91, 1886673M92, 1884278M91, 1886673M93, 1886 673M93, 1886673M94, 3824173V91, 3824173M91, 883914M94, 883914V94, 883914M1 (Item #: 184415, Ref: 1886673M94) $79.00

Air Cleaner Hose - For Massey Ferguson tractor models 231, 240P, Replaces Massey Ferguson OEM number 1672724M1, A: 2.00", (Item #: 167262) $40.70

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Massey Ferguson 230, 231, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 290, 670, 690, 154-4, 174-4S, 184-4S, 194-4F, 20C, 20D, 254-4, 274-4, 294-4, 30B, 30D, 30E, 40B, 50C, 50D, 50E. Replaces original part numbers 1039071M1, 1890147M1, 3638268M1, 3907536M1. (Item #: 112513, Ref: 1039071M1) $5.20

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.30

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $27.00

Fuel Filter, CAV type - Fuel filter for tractor models 410, 510, 8450, 865, Super 92, 1045, 20D, 20E, 20F, 2200, 25, 30E, 30H, 302, 304, 40, 40E, 60, 70, 80, 885, Super 90, 1080, 1085, 1100, 1105, 1130, 1135, 135, 135 UK, 150, 154-4, 165, 165 UK, 175 UK, 178 UK, 194-4, 231, 240, 50, 251, 253, 263, 2640, 265, 2675, 2705, 271, 274-4, 275 UK, 281, 282, 283 UK, 285. Replaces 1077260M91, 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.00

Fuel Filter Head - This Fuel Filter Head is used on CAV type fuel systems on Massey Ferguson. Replaces original part numbers 1891262M1, 1044869M1. Uses filter part number D8NN9176AA. Note, this filter head has two 1/2 inch UNF thread ports on the top. (Item #: 178935, Ref: 1891262M1) $18.60

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Massey Ferguson 133, 135, 140, 145, 152, 155, 158, 165, 168, 174-4, 175, 178, 184-4, 185, 188, 194, 20F, 230, 231, 240, 243, 250, 253, 2620, 2625, 263, 2640, 2645, 265 S (TR), 2680, 2685, 2725, 274-4, 275, 284-4, 285 S (TR), 290, 294-4, 3080, 3090, 30H, 3610, 3630, 364, 3650, 375E Brazilian, 390E Brazilian, 4225, 4235, 4245, 4255, 4265, 4325, 4335, 4345, 4365, 530, 560, 565, 592, 595, 6235, 6245, 6255, 6265, 660 Brazilian, 840 (Item #: 179631, Ref: D2NN9N090B) $7.80

Fuel Injector - This New Injector is used on MF230, MF231, MF240, MF250, MF255, MF275. Industrials: 20D, 20F, 30E, 40B. Replaces OEM 1447401E91 and 1447401R91.. It replaces original part numbers 1447401E91, 1447401M91, 1447401R91, Perkins 645680, 2645680 (Item #: 115529, Ref: 1447401M91) $60.00

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Injector, Remanufactured, AGCO, 1076975M91, 1447401E91, 1447401M91 - For Massey Ferguson tractor models 30, 230, 231, 240, 250, 255, 275, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 40, Replaces Massey Ferguson OEM number 1447401E91, 1447401M91, 1447401R91, Replaces AGCO OEM number 1076975M91, All Injectors are complete with gaskets and dust shield, For a New version of this sku use Item #: 115529, (Item #: 210579) $75.01

Fuel Injector Washer - One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03 (Item #: 168623, Ref: 921173) $0.70

Fuel Line - The fuel line is used from the tank valve to the lift pump. It is 17-3/4 inches long. 1/2 UNF thread fittings. Used on Massey Ferguson 20D, 20E, 20F, (30E Power Shuttle), (30E with thermal or ether start), 30H, 40E, (135 UK Engine serial number 152UA38571D and up), (240 below serial number N01001, with or without reserve fuel tank), (240 serial number N01001 - A20286, with ergonomic pedals), 240P, (250 with or without reserve fuel tank). Replaces 883712M92, 883712M94, 883712M93 (Item #: 163387, Ref: 883712M92) $9.40

Fuel Line Seal Kit - This kit includes: 4 33811115 (3/8 O.D. 1/4 I.D. 1/4 W) sleeves, 7 33811113 (7/16 O.D. 1/4 I.D. 1/4 W) sleeves, 4 33811112 (5/16 O.D. 3/16 I.D. 3/16 W) sleeves, and 8 921176 Injector Nozzle Washers. This will service the fuel lines on many 3- and 4-cylinder Perkins equipped models. Perkins 152, 203, 212, 236, 248 Diesel Engines. There will be extra pieces when servicing a 3-cylinder engine. Replaces Perkins 33811115, 33811113, 33811112, 921176, 0921176. Replaces Massey Ferguson 376527V1, 376527X1, 376525X1, 376525V1, 376524X1, 376524V1, 376518V1, 376518X1 (Item #: 187517) $13.30

Fuel Pump - For 148, 203, 20B, 20C, 20E, 20F, 230, 231, 240, 245, 250, 253, 254, 254-4, 255, 30B, 30D, 30E, 30H, 350, 353, 354, 355, 360, 363, 40, 40E, 550. Fuel Pump. 4 hole mount. Replaces 1447582M91, 2641712, 2641808, 4222090M91. (Item #: 117602, Ref: 3637292M1) $22.40

Fuel Pump - For tractor models 154-4S, 230, 231, 240, 241, 20C, 20D, 30B all with engine serial number U635849G and up, 245, 250, 253, 254-4, 30D, 30E, 40E. This fuel pump has four mounting holes and is for a AD3.152 Perkins Engine. Also replaces 3637282M91, 3637292M91. (Item #: 117602, Ref: 14475825M91) $22.40

Fuel Pump Repair Kit - This kit repairs 3637307M91 2 bolt, 14475825M91 4 bolt, 3637292M1 4 bolt fuel lift pumps. Replace 1852113M91, 1896329M91, 1896434M91, 26410009, 26410087, 3640785M1, 4222125M91, 4222125V91, 740861M1 (Item #: 165257, Ref: S40567) $16.50

No
Picture
Fuel Sender Unit - For Massey Ferguson tractor models 231, 240, Replaces Massey Ferguson OEM number 1876754M92, (Item #: 168359) $45.90

Fuel Shut Off - Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. 3/8 BSPT male thread to tank, 1/2 UNF female outlet. (Item #: 151838, Ref: 1851653M91) $10.70

Fuel Shut Off - Fuel Shut Off and Strainer. For tractor models MF231, MF240 and MF250 without reserve tank. Industrials: 20D early, 30E, 40E. (Item #: 151837, Ref: 898540M91) $11.20

Fuel Shut-Off Cable - This Fuel Shut-Off Cable is 38-3/4 inches overall length. It is used on Massey Ferguson 231, 240P, 261, 690, 699, 1004T, 550, 565, 575, 590, 675, 690, 698T. Replaces 1667625M1, 1667640M1, 1617602M1 (Item #: 161938, Ref: 1667640M1) $23.90

Fuel Tank Cap - For Massey Ferguson tractor models 20, 35, 35X, 40, 65, 135, 165, 175, 178, 231, 240, 240P, 250, 253, 261, 263, 270, 275, 283, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20B, 20C, 20D, 20E, 20F, 25, 30B, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 50HX, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 1698042M91, 1666439M91, 1876534M91, 828583M91, For gold color cap use Item #: 153639, (Item #: 113555) $14.00

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Item #: 168625, Ref: 921176) $0.60

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $16.00

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. For tractors: MF154-4, MF184-4, MF240, MF250, MF270, MF274-4, MF399, MF670, MF690, MF698, MF3070, MF3090. Replaces Perkins 2666108, Massey Ferguson 1446935M1, 3583453M2, 3583543M2, 3583543V2, 893501M91. (Item #: 118792, Ref: 3583543M2) $11.80

Gauges

Fuel Gauge - For tractor models (20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with serial number <271212), 50, serial number 87500>. Fuel Gauge. 2 inch body diameter. Replaces 1877717M92, 1877717M93 (Item #: 104118, Ref: 1877717M92) $22.60

Lamp Housing - For tractor models 231, 240, 250, 253, 270, 283, 290, 298, 20D, 20E, 30E, 40E, 50E. Replaces 1663555M92, 1663555M93 (Item #: 184514, Ref: 1663555M92) $22.40

Switch, Water Temperature Sending Unit - Sending unit, water temperature. For tractors: MF25, MF130, MF154-4, MF154-S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF254-4, MF270, MF274-4, MF283 except Brazil, MF285 to serial number 9A34239, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF2675, MF2705, MF2745, MF2775, MF2805, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3660 Industrials: 20D, 30E, 40E, 50E. Replaces 1877731M92, 1877731M93, 1877731V92, 531209M1 (Item #: 121163, Ref: 1877731M92) $7.20

Tachometer - For tractor models . Replaces 187718M92. Uses 26 inch drive cable part number 1699381M92. (Item #: 104130, Ref: 1674638M92) $33.40

Tachometer Cable - This Tachometer Cable is 23-1/2 inches overall length. It is used on Massey Ferguson 231, 235, 245, 255. Replaces 1667951M91 (Item #: 121218, Ref: 1667951M91) $15.80

Hitch / Drawbar

No
Picture
Chain - For Massey Ferguson tractor models 35X (FE), 65, 135, 231, 240, 240P, 250, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, 203, 205, 302, 304, Replaces Massey Ferguson OEM number 184377M1, 184377V1, (Item #: 173681) $9.70

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.00

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

Drawbar Pin, Front - For Massey Ferguson tractor models 135 (UK), 165 (UK), 175 (UK), 178 (UK), 231, 240 (s/n N01001-A20286), 250, 253, 261, 263, 270, 275 (UK), 283, 290 (UK), 290, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier, s/n B18009-later), 383, 390 (s/n B18008-earlier, s/n B18009-later), 390T (s/n B18008-earlier, s/n B18009-later), 393, 396, 398 (s/n B18008-earlier, s/n B18009-later), 399 (With 1006.6 engine), 670, 690, 4243, 4253, 4325, 4335, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 20F, 30E, 40E, 50E, Replaces Massey Ferguson OEM number 886166M1, (Item #: 170267) $15.70

No
Picture
Hydraulic Lift Shaft Bushing - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 680, 698, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40E, 50C, 50D, 50E, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1870934M1, Dimensions: 2-3/16" x 2-3/8" x 2-55/64", With oil spot, (Item #: 173699) $12.70

Leveling Box Assembly - With hand crank adjusts from 19 inches to 24 inches. For tractor models 135 serial number 439191>, FE35, 150, 20, 20C, 203, 205, 2200, 230, 240, 245, 30, 65, FE135 COVENTRY, 2135 TURK, (20D, 20F, 250, 30B, 30D, 30E, 40B, 40E, ALL UK MODELS), 231 URSUS, (202, 204, ALL WORK BULL). Adjustment is 19 inches to 24.5 inches center to center hole. (Item #: 115661, Ref: 1660373M92) $67.00

Leveling Box Fork - A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Item #: 110971, Ref: 184358M1) $32.12

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $20.98

No
Picture
Leveling Box Knuckle Pin - For Massey Ferguson tractor models 35X (FE), 135, 150, 165, 175, 230, 231, 240, 245, 250 (UK), 255, 265, 275, 285, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D (UK), 20F (UK), 30, 30B (UK), 30D (UK), 30E (UK), 40B (UK), 40E (UK), 202, 203, 204, 205, 302, 304, 2135, 2200, Replaces Massey Ferguson OEM number 376399X1, Overall Length: 3.59", Diameter: .618", (Item #: 173854) $3.00

No
Picture
Lift Arm Ball - Cat 1 - For Massey Ferguson tractor models 135, 165, 231, 235, 240, 250, 253, 261, 360, 362, 390, Replaces Massey Ferguson OEM number 886428M1, (Item #: 165858) $7.70

Lift Arm Ball with Clip, Category II - This ball measures: Inside Diameter: 1-1/8 inches, Outside Diameter: 2-1/4 inches. Width: 1-3/4 inches. Includes retaining clip. Replaces 886429M1, 1860936M1 (Item #: 192517) $13.60

No
Picture
Lift Link Yoke Clevis Pin - For Massey Ferguson tractor models 65, 135, 165, 168, 175, 178, 180, 185, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 394, 399, 451, 461, 471, 481, 491, 492, 543, 575, 583, 590, 596, 670, 675, 690, 698, 699, 1080, 1085, 3050, 3060, 3070, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 20F, 30, 30E (UK), 31, 40, 40B, 40E, 40E (UK), 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 3582662M1, 893567M1, Fits Massey Ferguson tractor models 299, 765, (Item #: 174723) $8.90

Lower Link Shaft - Pivot shaft, for lower link, except Orchard and Vine. Threaded ends 5/8 inch NF and 3/4 inch NF, overall length 6 inch. For tractors: MF230, MF231, MF235, MF240, MF245 Industrials: 20, 20C, 20D, 30 Turf. Replaces 1867851M2, 1867851M3. (Item #: 164478, Ref: 1867851M3) $26.50

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.80

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.90

No
Picture
Rod Yoke - For Massey Ferguson tractor models 35X, 135, 150, 165, 175, 230, 231, 240, 245, 250, 255, 265, 275, 285, 431, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 202, 203, 204, 205, 302, 304, 2135, Replaces Massey Ferguson OEM number 826410M92, 1660372M91, 1660372V91, 184350M91, 897683M91, Left Hand, (Item #: 174479) $41.70

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $5.40

Hydraulic System

Center Housing - For tractor models 231, 240, 245 serial number up to 9A349239, 250, 255 serial number after 9A250920, 265, 270, 290, 276 serial number up to T192032, 690 2WD serial number up to T192032, 690 4WD serial number up to T314008, 20C, 20D, 30B with rear axle serial number CE17398 and up, 30E, 50C with rear axle serial number CE17398 and up, 50F. center housing. Part number stamped on right side. (Item #: 179945, Ref: 1664511M3) $1249.01

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.80

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.90

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $21.30

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.00

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $13.50

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.40

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $6.00

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $419.00

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $119.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Pump - For Massey Ferguson tractor models 231, 240P, Replaces Massey Ferguson OEM number 1076957M91, 1870995M92, 313029K91, (Item #: 170490) $644.98

Hydraulic Pump - For tractor models (TO35 serial number 179304 and up), 35, (50 serial number 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. 10 spline w/1 3/8 inch diameter shaft. Horizontal safety valve. This pump is 7 3/4 inches wide, 5 1/2 inches high, 12 1/2 inches long. Shaft Length 6 1/2 inches. ***NOTE: various pumps were used on these models - verify configuration in picture. (Item #: 155591, Ref: 184473M93) $300.00

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $6.20

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring Kit with Gaskets is used on 230, 235, 245, 255, 265, 275, 1080, 1085, 285, 231, 240, 250, 253, 360, 362, 270, 282, 283, 290, 298, 20D, 30E, 40E Replaces 1810680M91 (Item #: 165750, Ref: 1810680M91) $14.80

Hydraulic Pump Piston Ring - Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Item #: 165929, Ref: 897493M1) $1.90

No
Picture
Hydraulic Pump Response Spring - For Massey Ferguson tractor models 178, 230, 231, 235, 240, 240P, 245, 250, 251XE, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 670, 690, 698, 699, 1085, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1868454M2, (Item #: 173689) $1.30

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.90

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $253.00

No
Picture
Hydraulic Valve Kit - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 178, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, (Item #: 176627) $351.61

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $509.00

Lever, Draft Control - This Draft Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870340M92, 1870340M91 (Item #: 179600, Ref: 1870340M92) $16.40

Lever, Position Control - This Position Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870341M92 (Item #: 170906, Ref: 1870341M92) $18.60

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $10.30

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Piston - This Lift Pump Piston has a 0.980 Inch Piston. Uses 897493M1 rings, not included. For tractors: 135, 150, 165, 175, 180, 230, 235, 245, 1080, 1085, 255, 265, 275, 285, 231, 240, 250, 253, 360, 362, 20D, 30E, 40E, 270, 282, 283, 290, 298. Replaces 1860038H1, 1860038M91, 1860038V1, 3158071M1, 518476M1 (Item #: 173306, Ref: 1860038M1) $5.70

Lift Pump Relief Valve - For tractor models FE35, 135, 20F, 231, 240, 240P, 253, 30E, 35, 350, 355, 365, 375, 390, 398, 399, 40E, 50E, 65, 765, FE135 COVENTRY. (2800 pound psi). (Item #: 170916, Ref: 828927M92) $18.80

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $81.00

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Item #: 173307, Ref: 1872648M93) $54.00

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Item #: 151049, Ref: 897567M3) $82.00

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $46.24

$Massey Ferguson 231 Piston Ring, Hydraulic - 3 1\8, Pack of 3$
Piston Ring, Hydraulic - 3 1/8, Pack of 3 - For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 serial number up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. (Item #: 176222, Ref: 897564M1) $4.10

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.57

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $4.20

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $31.27

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Item #: 179593, Ref: 898208M2) $22.20

Response Cover - This Response Cover is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1668053M1 (Item #: 180324, Ref: 1668053M1) $15.70

Response Lever - This Response Lever is used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1662278M2 (Item #: 180325, Ref: 1662278M2) $4.30

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.90

Lights

Headlight Assembly, RH - Replaces 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with plastic cowl, 148, 155, 158, 165 584071> with plastic cowl, 168, 175 741981>, 178 741981>, 185, 188, 20D, 20E, 230, 240, 250, 254-4 22210641 >, 265, 2675, 2705, 2745, 275, 2775, 2805, 282, 290, 294-4, 298, 50F, 50H, 575, 590, 595 J222029>, 60H, 675, 690, 698, 698T, 699. (Item #: 117736, Ref: 1672768M91) $29.30

Headlight, LH - Replaces 1860176M1, 1890155M1, 1874192M92, 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with PLASTIC COWL, 135 UK MODEL serial number 145381>, 148, 155, 158, 584071> with PLASTIC COWL, 165 UK, 168, 175 741981>, 175 UK, 178 741981>, 178 771981>, 178 UK, 185, 188, 20D, 20E, 230, 240, 250, 254-4, 265, 2675, 270, 2705, 274-4, 2745, 275, 2775, 2805, 282, 285, 290, 294-4, 298, 50F, 50H, 550, 565, 575, 590, 595 J222029>, 60H, 670, 675 J222029>, 690, 698, 698T J222029>, 699. 5 1/2 inches lens outside diameter. (Item #: 117737, Ref: 1672769M91) $32.30

Miscellaneous

No
Picture
Hood Molding - For Massey Ferguson tractor models 231, 240P, 254-4, 270, 274-4, 275, 283, 290, 294-4, 298, Compatible with Massey Ferguson Construction and industrial models 50E, Replaces Massey Ferguson OEM number 1876153M1, (Item #: 173701) $46.40

$Massey Ferguson 231 Hydraulic Cylinder Piston w\o Rings$
Hydraulic Cylinder Piston w/o Rings - For Massey Ferguson tractor models 135, 150, 165, 230, 231, 235, 240, 240P, 245, 250, 255, 265, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30E, 40, 40E, 202, 203, 204, 205, 302, 304, 2200, 3165, Replaces Massey Ferguson OEM number 899595M91, 897561M91, 1665737M91, 885409M91, Replaces Landini OEM number 1665737M91, 897561M91, 885409M91, For Seal Kit use Item #: 163456, (Item #: 163460) $13.98

No
Picture
Instrument Panel Molding - For Massey Ferguson tractor models 231, 240P, 243, 253, 263, 270, 275, 283, 290, 298, 350, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, Compatible with Massey Ferguson Construction and industrial models 50E, Replaces Massey Ferguson OEM number 1877887M2, (Item #: 173708) $9.90

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

No
Picture
Tractor Canopy Headliner - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 250, 253, 255, 261, 265, 270, 275, 283, 285, 290, 298, Tractor Canopy use Item #: 167688, (Item #: 167697) $325.00

No
Picture
Transmission Thrust Washer - For Massey Ferguson tractor models 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 360, 362, 375, 451, 461, 471, 481, 543, 583, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 2500, 3165, 4500, 6500, Replaces Massey Ferguson OEM number 897367M1, 4.125" x 5" x .055", (Item #: 176214) $15.70

Oil System

Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 and AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Item #: 121771, Ref: 731117M91) $6.90

No
Picture
Oil Filler Cap - For Massey Ferguson tractor models 135, 154-4, 165, 174-4, 175, 178, 184-4, 194-4, 231, 240, 240P, 253, 254-4, 265S, 270, 274-4, 275, 282, 283, 285S, 290, 294-4, 360, 362, 364S, 365, 375, 383, 390, 390T, 393, 398, 670, 690, 3050, 3060, 3065, 3070, 3075, 3645, 6140, 6150, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 20F, 24, 25, 30E, 30H, 40B, 40E, 50E, 50F, 50H, 60, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 734962M91, Replaces JCB OEM number 02101448, 02101484, Replaces Leyland OEM number AJR4054, Replaces Perkins manufacturer number 2487854, (Item #: 164390) $3.98

Oil Filter, Spin On - Oil filter spin-on element. For tractors: MF135, MF150, MF165, MF235 industrials: 203, 204. Others with A3-152, AG3-152, AD3-152, A4-203, AD4-203. Replaces Perkins 2654408, S.40536. Measures 5 3/8 inches long and 3 1/8 inches diameter. (Item #: 180917, Ref: 1447082M1) $9.30

Spin-On Oil Filter Kit - This Spin-on Oil Filter Kit will replace the cartridge type filter for models 150, 154-4, 165, 230, 231, 235, 240, 245, 254-4, 255, 20, 20C, 20F, 30, 30B, 30D, 40, 2500, 4500 forklift. Spin-on Filter Kit for A4.212, A4.236 and A4.248 engines. Contains head, gasket and filter. Uses Filter Part Numbers 1447048M1 or S.40538. (Item #: 192029, Ref: S.41489) $35.00

Spin-On Oil Filter Kit - This Oil Filter Kit is for tractor models 35, 135 65, 150, 165, 20, 20C, 230, 235, 245, 2500, 255. All with A3.152, AD3.152. A4.203 or AD4.203 Perkins gas and diesel engines. Contains head part number 741922M1, gasket and filter. Uses filter part numbers 1447082M1 or S.40536. This kit uses shorter bolts than the original, part number 354505X1, not included. (Item #: 182458, Ref: S.40533) $24.91

PTO / Driveline

Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2) $23.00

No
Picture
Hydraulic Link Roller - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 898125M1, (Item #: 176342) $4.50

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $9.30

PTO Cover, LH - For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 30B, 30D, 30E, 392S, 40B, 40E, 50E. Replaces 888108M1, 3760665M1 (Item #: 167527, Ref: 3760665M1) $25.60

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1) $4.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $22.80

Sheet Metal / Body Parts

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $0.90

Steering

Axle Pivot Bushing - 1-7/8 inch x 2 inch x 1-3/8 inch. For tractor models 20C, 20D, 20E, 20F, 230, 231, 240, 240P, 245, 250, 253, 263, 30E, 360, 362, 40E. Replaces 1660457M1, 1660457M2 (Item #: 165406, Ref: 1660457M1) $13.10

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.30

Brake Shoe to Anchor Pin Spring - For Massey Ferguson tractor models TEA20 (s/n 200001-later), 135, 178, 231, 240, 240P, Compatible with Massey Ferguson Construction and industrial models 20D, 50F, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 825064M1, (Item #: 181483) $6.80

Connector Fitting - Power Steering Cylinder - For Massey Ferguson tractor models 231, 240P, Replaces Massey Ferguson OEM number 3029953M91, Long connector fitting, (Item #: 113794) $19.20

Connector Fitting Power Steering Cylinder - For Massey Ferguson tractor models 231, 240P, Replaces Massey Ferguson OEM number 7003936M91, Short fitting, For long fitting use Item #: 113794, (Item #: 113795) $20.10

Drag Link End - Drag Link End, front length 7.750 inches, diameter .582 inches. Used on 240, 250, 231, 20D, 20F. Replaces 1860565M2, 1860565M2. (Item #: 105141, Ref: 1692144M1) $37.80

Front Axle Lubricating Hose Assembly - Used on Massey Ferguson 20D, 20F, 30E, 30H, 40E, 231, 240, 240P, 250, 360, this kit includes hoses, bracket and fitting. (Item #: 173345, Ref: 1670913M91) $20.37

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.80

Linkage Repair Kit - Kit contains: 1 x 881728M1 Link End LH, 881727M1 Turnbuckle, 881729M1 Link End RH, 183080M1 Clevis Pin, 1 x 1888905M1 Link Control Pin, 3 x 354041x1 Spilt Pins, 1 x 353430x1 Nut, 1 x 375108x1 Nut. Used on 165 UK, 168, 175 UK, 178 UK, 185, 188, 231, 240, 250, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, 50, 50B. Verify part numbers before ordering. (Item #: 183824, Ref: S40143) $17.90

No
Picture
Pivot Pin Shim Washer - For Massey Ferguson tractor models 231, 240, 240P, 253, 261, 263, 270, 282, 283, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 396, 398, 399, 670, 690, 698, 699, 4225, 4235, 4240, 4245, 4255, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 50E, 50H, 6500, Replaces Massey Ferguson OEM number 882868M1, Inside Diameter: 1.9", Outside Diameter: 2.643", Width: .035", (Item #: 174614) $4.00

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder - This Power Steering Cylinder is used on Massey Ferguson 20D Indust/Const, 231, 240, 250. Open Length 14 inches, Closed Length 8-1/2 inches, Shaft Diameter .625 inches. Replaces 3401285M93, 3404472M91, 3773717M91, 3773717M92 (Item #: 146703, Ref: 3401285M93) $339.00

Power Steering Cylinder Rod - This Power Steering Cylinder Rod is used on Massey Ferguson 231, 240, 250, and 20D Tractors. 3404472M91 (Item #: 113793, Ref: 3404472M91) $104.00

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit is used on Used on 3401553M92 3401285M93 Cylinders. Replaces original part number 3904170M1. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Item #: 169728, Ref: 3904170M1) $20.00

Power Steering Filter - This Power Steering Filter is closed on one end with a spring, and open on the other end. It measures 2 Inches Outside Diameter, 1/2 Inch Inside Diameter, and 1-1/2 Height. If the canister o-ring is needed, order 1055980M1 separately. Replaces 1852097M1, 1052097V1, 1052097M1 (Item #: 183589, Ref: 1852097M1) $10.60

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $157.00

No
Picture
Power Steering Pump - For Massey Ferguson tractor models 35, 50, 135, 230, 231, 235, 240, 250, 253, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 30B, 30D, 30E, 40, 203, 205, 2135, 2200, 2500, 4500, Replaces Massey Ferguson OEM number 1695922M1, 773126M1, 773126UK, Reservoir Diameter: 6", Reservoir Depth: 4", For Smaller Reservoir use # 527904M91, Includes: Internal Filter, (Item #: 174372) $262.08

Power Steering Pump O-Ring - Used on Barnes power steering pumps. This o-ring should be replaced with changing your filter. Replace OEM numbers 70923825, 1055980M1, 359117X1 (Item #: 178036, Ref: 1055980M1) $2.20

Power Steering Pump with Breather - For Massey Ferguson tractor models 231, 240, 243, 253, 263, 360, Compatible with Massey Ferguson Construction and industrial models 40E, Replaces Massey Ferguson OEM number 3772717M91, 3774041M91, (Item #: 164485) $458.00

Power Steering Valve - For 231, 240, 250; Industrials: 20D, 20E, 30E. Power Steering Valve replaces 881290M93, 1884950M91, 3186463M94, 3186463M95. (Item #: 163637, Ref: 3186463M95) $478.51

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $5.30

$Massey Ferguson 231 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $29.50

Steering Arm Seal - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 165, 175, 180, 230, 231, 235, 240, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 670, 690, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3090, 3095, 3120, 3125, 3630, 3645, 3650, 3655, Replaces Massey Ferguson OEM number 183021M2, VPJ2801, Under Steering Arm, (Item #: 118285) $0.90

No
Picture
Steering Box - For Massey Ferguson tractor models 135, 231, 240, 240P, 250, Compatible with Massey Ferguson Construction and industrial models 20D, 30E, Replaces Massey Ferguson OEM number 1851998M3, (Item #: 191068) $20.67

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $862.72

Steering Box Seal - This Steering Box Seal is used on the Upper and Lower Sector Arm Shafts. It is used on FE35, 135 UK, 231, 240, 250, 20D, 20E, 30E. Replaces original part numbers 1007334M1, 11850019M1, 1893623V1, 195925M1, 195925M91, 195929M1, 833235M1, 1850019M1, 1893623M1 (Item #: 168933, Ref: 1893623M1) $3.10

Steering Column Adjustable Ball Race - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35 this part replaces 1850033M1 (Item #: 173340, Ref: 1850033M1) $20.50

Steering Column Dust Cover - This Steering Column Dust Cover is used on Massey Ferguson 135, 148, 20D, 20E, 230, 231, 240, 245, 250, 253, 30E. It Replaces 1864867M1, 827209M1 (Item #: 183024, Ref: 1864867M1) $7.60

Steering Column Felt Seal - This Steering Column Felt Seal is used on 133, 135, 140, 145, 148, 152, 158, 20D, 20E, 230, 231, 235, 240, 245, 250, 255, 260, 30E, 35, 35X, FE35. It Replaces 827210M1 (Item #: 178135, Ref: 827210M1) $1.70

Steering Column Lower Bearing - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35, this bearing measures 0.845 inches inside diameter, 1.370 inches outside diameter, and 0.453 inches wide. Replaces OEM number 1850031M1, K903461 (Item #: 173343, Ref: 1850031M1) $10.00

Steering Column Seal - This Steering Column Seal is used on 35, 35X, 835, 133, 135, 140, 145, 148, 152, 158, 230, 231, 231S, 235, 240, 240P, 241S, 245, 250, 255, 260, 20D, 20E, 30E. It is 31mm (1.22047 Inches) x 4mm (0.15748 Inches). Replaces 1850234M1 (Item #: 173679, Ref: 1850234M1) $2.10

Steering Gear Side Cover Gasket - Used on Burman (UK) steering gear assemblies on Massey Ferguson models 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35 (Item #: 168939, Ref: 1850041M1) $2.00

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.80

Steering Shaft, 22.5 Inches - Used on UK built Massey Ferguson models: 230, 231, 240, 240P, 250, 20D, 30E. Replaces OEM numbers 1890727M91, 1890727V91 (Item #: 114299, Ref: 1890727M91) $80.00

Steering Shaft Bearing Kit - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35. Replaces 13535X, 1850053M1, 1850032V1, 1850053M91, 1850031M1, 1850032M1, 1850033M1, 1850034M1 (Item #: 179637, Ref: 13535X) $22.30

Steering Shaft Housing - Used on the following Massey Ferguson models with power steering: 20D, 30E, 231, 240, 240P, 250. (Item #: 173350, Ref: 881126M2) $126.00

Steering Wheel - Steering wheel. For tractors: MF240 except Hydro Static Steering, MF250 Industrials: 20D, 30E. 15-3/4 inch diameter wheel with 11/16inch tapered and 40 splined hub. Does not include cap. Replaces 1691798M1, 1691798M2, 1673006M1, 3774839M91, 966461M1 (Item #: 153638, Ref: 1691798M1) $26.80

Tie Rod End (LH) - Used on the Left Side of Massey Ferguson 231 and 240P tractors, this tie rod end measures 7.500 inches from the center of the ball joint to the end of the rod. The rod is 0.589 inches in diameter. (Item #: 160161, Ref: 3027647M1) $67.00

Tie Rod End (RH) - Used on the Right Side of Massey Ferguson 231 and 240P tractors, this tie rod end measures 7.500 inches from the center of the ball joint to the end of the rod. The rod is 0.589 inches in (Item #: 160160, Ref: 3027646M1) $76.00

Wheels

Dual Wheel Adapter - Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1 (Item #: 179639, Ref: 818017M1) $9.80

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $22.00

Rear Wheel Center - This Wheel Center is used with 1688674M91 Rim. Additional $20shipping due to weight. Replaces 1678718M1 (Item #: 178805, Ref: 1678718M1) $378.51

Rim 14x30 with 8 Loop - Rim, 14 inch x 30 inch de-mountable rim with 8 loop clamps. Add $30.00 extra shipping per rim due to weight. Replaces 1678716M91, 1688674M91, 1884726M91 (Item #: 178988, Ref: 1688674M91) $597.00

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $0.70

Wheel Hub - This wheel hub replaces 886337M1 for tractor models 135UK, 165UK, 168, 20D, 20E, 231, 240, 250, 253, 265, 275, 360, FE135, 550, 565. (Item #: 102491, Ref: 886336M1) $36.30

Wheel Stud - Stud is 9/16 inch x 2 inch. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. Also replaces 185400M1 and 185400M2. (Item #: 151964, Ref: 825507M1) $2.10

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.60

Wheel Stud Nut - Nut is 9/16x18 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Wheel Stud Nut - Nut fits rear wheel stud. 9/16 inch NF. Used with 185400M1 and 185400M2 stud. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $13.80

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.10

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $35.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.10

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.50

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $98.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $68.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $19.74

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.80

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 231 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $106.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $134.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $104.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $166.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $149.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Massey Ferguson 231 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Massey Ferguson 231 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 231 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Massey Ferguson 231 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 231 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 231 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.30

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.60

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$Massey Ferguson 231 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $44.90

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $73.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $85.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $22.98

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $70.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $70.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $261.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $117.34

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $18.40

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $144.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $868.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $74.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $311.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $242.80

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $97.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $103.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $109.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $400.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $67.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.90

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $70.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $25.50

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $10.90

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $32.90

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.40

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $57.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $132.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $1.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $52.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $408.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.30

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $94.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $130.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $160.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $154.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00