FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 40 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Actuator and Latch Kit - With spring and clevis pin. For tractor models TO35, FE35, F40, MH50, 50, (65 up to serial number 692932), 135, 150, 230, 235, (240 up to 2/1995), (283 Brazil), 20, 20C, 30B, 30D, 35 Turf and Utility, (40, 40B, 50C, 50D with instant reverse transmission), 50. Replaces 181450M1, 181449M1, 180809M1, 181149V1. (Item #: 169743, Ref: 181450M1) $18.10

Actuator Rod Boot, Dry Brakes - For tractor models 65, 85, 88, Super 90, (135 Orchard malleable axle), 150, 154-4, (165, 180, 31, 40 malleable axle), (165 UK up to serial number 597745), 174-4, 175, 175 UK, 178, 184-4, 254-4, 274-4, 285, 294-4, 1080, 1085, 30, 50, 3165 Utility. (Item #: 105645, Ref: 183462M1) $6.50

Brake Actuating Spring - Used with disc brakes. For tractor models Super 90, 1001, 1080, 1085, 135 Orchard, 150, 154-4, 154S, 165, 165, 174S, 175, 180, 180, 194F, 203, 205, 2200, 2500, 254-4, 274-4, 294-4, 302, 303, 305, 3165, 356, 404, 406, 65, 85, 88, 95, 97, Industrial: 30, 31, 40, 50. Replaces: 1005510M1. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Actuator 7 Inch - This 7 Inch Brake Actuator is used on Massey Ferguson: 1080, 135, 140, 145, 150, 152, 155, 158, 165, 175, 178, 180, 30, 31, 3165, 50, 65, 765, 85, 88, 95, 97, 99, MF40, MF50, Super 90. Replaces 764805M92 (Item #: 105630, Ref: S.40829) $82.00

Brake Actuator for Dry Brake Systems - For tractor models 1080, 1085, 165, 175, 180, 255, 30, 40, (135, 235 both Orchard), (265, 275, 285, all serial number below 9A349239). Brake Actuating Assembly. (Item #: 105631, Ref: 535873M91) $239.98

Brake Actuator - Wet Brake Systems - 9 inch. For tractor models 135, 165, 175, 180, (235 Orchard), 255, 265, 275, 285, 1080, 1085, 30, 31, 40. Replaces 1860963M91, 1860963M92. (Item #: 105629, Ref: 1860963M91) $66.00

Brake Disc - For tractor models 135, 150, 165, 175, 180, 203, 205, 2500, 30, 302, 304, 31, 3165, 356, 40, 50, 65, 85, 88, 90. Replaces 1753117M91. Brake Disc is 7.125 inches X 4.000 inches in diameter and has 27 splines. (Item #: 105627, Ref: 1021314M1) $22.10

Brake Disc - Brake Disc is 8 7/8 inch outside diameter and 6 inch inside diameter, 27 splines. For tractor models 1080, 135, 165, 175, 180, 235, 255, 265, 275, 285, 30, 31, 40. Replaces 1805980M1. (Item #: 105628, Ref: 1044526M1) $30.00

Brake Drum - Brake drum 16 inch outside dia 4 1/2 inch hub diameter. For tractors: TO35, MF35, F40, MH50, MF50, MF135 (except orchard), MF150, MF230, MF235 (except orchard), MF240, MF245 (except orchard). Industrials: 20, 20C, 20D, 30 turf, 35, 40, 202, 204, 2135, 2200, 3165. Uses two 182278M1 retaining screws per drum (not included). Replaces 181230M1, 827707M91, 827707M7, 827707M6, 827707M3, 825631M91, 822707M5, 8207707M4, 181230M1, 827707M1, 827707M4, and A827707M5. (Item #: 105637, Ref: 827707M5) $95.00

Brake Friction Disc - Brake Friction disc, used in wet disc brake system. OEM quality, appearance and performance. For tractors: MF245, MF250, MF255, MF265, MF275, MF285, MF1085 industrials: 11 wheel loader UK, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D, 60 backhoe/loader forklifts: 4500 (Item #: 105632, Ref: 1860964M2) $30.20

Brake Lever Bracket, Left Hand - Replaces 1860970M1. For tractor models 1085, 135, 165, 175, 180, 235, 245, 255, 265, 275, 283, 285, 30, 30B, 40, 40B, 4500, 50A, 50C, 6500. (Item #: 105642, Ref: 1860969M1) $48.70

Brake Lever Bracket, Right Hand - Brake lever bracket replaces 1667224M1, 1860972M2. For tractor models 1085, 135, 165, 165 UK, 175, 180, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 263, 265, 271, 275, 275 UK, 281, 282, 283, 283 UK, 285, 290, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D. Different suppliers have different parts for the same part number. VERIFY PICTURE LOOKS LIKE YOUR OLD PART. (Item #: 105643, Ref: 847705M2) $121.00

Brake Lever Return Spring - This Brake Lever Return Spring is use on multiple Massey Ferguson Tractors. It is 3 5/16 inches in length. It replaces original part numbers 533618M1, 517503M1, 184171M1, 1868691M1, 773222M1. (Item #: 124541, Ref: 773222M1) $6.80

Brake Rod - Brake rod with spacer and nut, 6-1/4 inch from end of rod to hole center. Disc brake lever to actuating links, except models with cast axle housings. For tractors: MF65, MF135, MF150, MF165, MF175, MF180, MF1080 industrials: 30, 40, 50, 203, 205, 302, 304, 3165 Forklift: 25. (Item #: 105646, Ref: 184334M1) $18.00

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $15.70

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $2.00

Spring, Brake Lock - For tractor models 235 Orchard, 245, 255, 265, 275, 285, 20C, 30, 30D, 40, 40B, 50C, 50D. Replaces 181149M1, 181150M1, 181149V1 (Item #: 178118, Ref: 186441M2) $4.30

Spring, Parking Brake Latch - For tractor models F40, FE35, TO35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 20, 230, 235, 240, 282, 30, 3165, 65, 35, 35 UK, 40, 50, MH50. (Item #: 173676, Ref: 180809M2) $3.40

Clutch

$Massey Ferguson 40 Clutch Alignment Tool - 1-1\8 inch x 21 and 1-5\8 inch x 25 Spline$
Clutch Alignment Tool - 1-1/8" x 21 and 1-5/8" x 25 Spline - For Massey Ferguson tractor models 20, 30, 40, 231, 231S, 240, 241, 241S, 243, 251XE, 253, 261, 263, 265S, 271, 271XE, 275, 281XE, 283, 285S, 290, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 533, 593, 596, 699, 2670, 2680, Replaces manufacturer number 8301145, Pilot Diameter: .670", 1st Spline: 1 1/8", 21 Spline, 2nd Spline: 1 5/8", 25 Spline, (Item #: 167411) $20.00

Clutch Assembly, Dual - Dual Clutch uses 11 inch main disc (1-1/8 inch 10 spline hub) (NOT INCLUDED) and 9 inch PTO disc (1-3/4 inch 10 spline hub) (INCLUDED). Fits 35, 50, 135, 150, Industrials: 35 Turf, 35 Utility, 2135, 20 Turf, 20 Utility, 40. Replaces 526666M91, 512355M91, 193930M92, 184541M94, 533795M91 all having a 1 3/4 inch flywheel offset. (Item #: 122846, Ref: 526666M91) $307.00

Clutch Disc, 9 Inch - 10 spline on a 1 3/4 inch hub diameter. PTO Clutch Disc For 20, 30, 40, F40, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65, TO35. (Item #: 163114, Ref: 3620411M91) $52.00

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $9.70

Clutch Kit, Dual, Coarse Spline - Includes NEW: 526666M91 Pressure Plate is 11 inch and 10 spline, 516068M93 Clutch Disc is 11 inch and 10 spline, Release and Pilot bearings, and clutch alignment tool. Fits the following tractors that use a 10 spline PTO disc: 135, 150, TO35. This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch. Not for Deluxe models. (Item #: 111063, Ref: 1212-1400) $303.00

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.20

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $9.20

Friction Plate - Friction Disc, 5-1/4 inch outside diameter, 45 Internal Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. Replaces 1754345M1. For 204, 205, 304, 30B, 30E, 30, 40B, 40, 50A, 50C, 50D, 50E, 50. Replaces AR39128, 1754345M1, 1754345M2, 1804831M1, 2757328M1, 2757328V1. (Item #: 118132, Ref: 2757328M1) $11.10

Friction Plate - Friction Plate, 5-7/16 inch outside diameter, 50 External Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. For 204, 205, 30, 304, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E. (Item #: 155467, Ref: 1754344M1) $11.40

Massey Ferguson 40 Independent PTO Clutch Pack Parts

Independent PTO Clutch Pack Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility and turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Item #: 182796, Ref: 1040884M1) $82.00

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $22.50

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $24.10

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Item #: 182186, Ref: 899818M2) $17.50

Trans. Disc, 12 - Organic, rigid disc. Replaces 887889M94, 1.125 inch spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Item #: 159009, Ref: 3599462M92) $57.00

Cooling System

No
Picture
Gasket - For Massey Ferguson tractor models 20, 35, 35X, 40, 50, 135, 150, 154-4, 205, 230, 235, 240, 240P, 245, 250, 254-4, 302, 304, 364S (s/n D03066-early), 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 30H, 40E, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 731210M1, , Compatible with Massey Harris tractor models 50, (Item #: 160354) $4.70

Radiator - For Massey Ferguson tractor models 40, 150, 2200, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 40, 2200, Replaces Massey Ferguson OEM number 505641M91, Overall Height: 25", Overall Width: 16", Core Height: 19-1/8", Core Width: 15-5/8", Depth: 2", Rows: 3, Fins Per Inch: 9, Fill Neck Height: 3/4, Inlet: 1-1/2", Outlet: 1-1/2", Radiator mounting pads use Item #: 109978, (Item #: 101796) $634.00

Radiator Hose Lower - Hose, radiator lower. For tractors: MF235 Orchard Diesel, MF245 Orchard Diesel Industrials: 20C except Turf, 30B Diesel, 30D, 40. (Item #: 159478, Ref: 511951M1) $19.40

Radiator Hose, Water Pump to Cylinder Block - 1.375 inch inside diameter. For tractor models (135 with Perkins Gas or Diesel Engine), 5830, 5870, (550 with AD3.152 engine), 2500, 20, 20C, 20D, 20E, 20F, 2135, 2200, 30B, 30D, 30E, 30H, 40, 4500. (Item #: 128490, Ref: 732443M1) $7.70

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $7.00

Thermostat Housing - Thermostat housing also replaces 37766361. For tractor models 135, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 5830, 5830FC, 5860, 5870. Replaces 746835M1, 37766361, 37766362, 37766363, 737192M1. (Item #: 173276, Ref: 746835M1) $68.00

Water Pump Gasket - Used on Perkins 144 and 152 cubic inch, three cylinder engines. Replaces 957E8507, 72080255, 0941183, 731275M1, 4222931M1, 36862532 (Item #: 155091, Ref: 4222931M1) $8.10

Drive Train

Massey Ferguson 40 8 Speed Constant Mesh Transmission Parts

8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 40 8 Speed Synchromesh Selector Parts

8 Speed Synchromesh Selector Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 40 8 Speed Synchromesh Transmission Parts

8 Speed Synchromesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $23.80

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.92

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $45.80

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $10.70

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $11.80

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $359.15

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $27.60

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $20.98

Crown Wheel and Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $78.00

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $90.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $68.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $77.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 2.92 inch diameter. For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 180, 1800, 1805, 203, 205, 2135, 2200, 2500, 302, 304, 3165, 35, 356, 40, 50, 65, 70, 80, 85, 88, Super 90. (Item #: 173507, Ref: 181275M1) $59.00

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $9.90

Differential Plate, Right Hand - For tractors with Wet Brakes, this differential plate is used on Massey Ferguson models: 4500, 6500, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60HT, 1085, 245, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 50, 670, 690, 698, 699. Uses gasket 183254M1 and O-Ring 1860838M1. Replaces Massey Ferguson part number 1860882M1 (Item #: 173173, Ref: 1860882M1) $146.01

Differential Ring and Pinion Set - 10 inch Pinion Gear length. For tractor models TO35, 130, 135, 150, 230, 235, 35, 40, 50. Replaces 1885317M92 and 1889777M92. Long pinion ( 9.93 inch /252mm), 37 tooth ring gear, 6 tooth 10 spline pinion shaft. (Item #: 187024, Ref: 1683757M91) $345.00

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Item #: 163463, Ref: 1665962M91) $3.98

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.30

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Filter Screen - Filter screen, transmission. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182880, Ref: 1754633M1) $42.70

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.20

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $77.00

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $26.10

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $28.70

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $1.98

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref: 897005M1) $110.00

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $74.00

Gear Shift Knob - Hi-low shift knob, for shift levers with 3/8 inch NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285. (Item #: 151021, Ref: 1862399M1) $8.20

Gear Shift Knob - This 4-speed shift knob is for a 3/8 fine thread lever. NOTE: may come without the face of the knob being printed in white. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 154696, Ref: 532959M1) $9.90

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $4.00

Gear Shift Knob, 6 Speed - 6 speed shift knob. Can replace plain knob and pattern label 1682623M1 and 1682630M1. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF135 UK, MF150, MF165, MF165UK, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 151022, Ref: 1862401M1) $8.30

Gearshift Lever - For tractor models FE35, 135UK, 150, 165, 175, 20D, 230, 235, 245, 255, 265, 275, 285, 30, 30E, 40, 40E, (20F SN# 50101A0192 and up). Replaces 891405M1, 194550M3. (Item #: 123094, Ref: 1673814M2) $42.20

Gear Shift Lever - For Massey Ferguson tractor models 20 (F), 40 (E), 50 (E), 50 (E, Power Shuttle), 231S, 241, 265S (Turkey), 270, 271, 275 (UK), 281, 282, 283, 283 (UK), 285, 285S (Turkey), 290, 290 (UK), 298, Replaces Massey Ferguson OEM number 1873275M2, (Item #: 165915) $19.76

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $26.40

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $35.70

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.28

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $37.00

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $55.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.40

Massey Ferguson 40 Instant Reverse Transmission Parts (Industrial)

Instant Reverse Transmission Parts (Industrial) - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Instant Reverse Transmission Pump - For tractor models 204, 205, 303, 30, 30B, 30D, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 50F, 60, 2200, 2500, 4500. Replaces 1034964M91, 1754316M91, 530718M91, 530718M92. (Item #: 170901, Ref: 86516596) $302.00

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $28.90

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $97.15

Oil Seal, Axle - Outer oil seal in rear axle housing, for tractors with wet brakes. For models: MF255, MF265 except Orchard, MF275, MF285. MF298, MF398, MF399, MF690 to serial number T1301043, MF698, MF699, MF1085 Industrials: 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D. 2 3/8 inches inside diameter, 3 3/8 inches outside diameter, 7/8 inch width. Replaces 1860954M1 (Item #: 151020, Ref: 1860954M1) $10.70

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.40

Pinion Bearing Sleeve - Used with 1862189M1 differential housing. For tractor models 135, 175, 180, 20, 235, 30, 40. (Item #: 173354, Ref: 518881M91) $118.00

Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $32.98

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $12.70

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.51

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Item #: 125326, Ref: 1868531M1) $21.98

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $18.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $21.30

Planetary Pinion Carrier Assembly - 32mm gears, used with 18 tooth shaft. For tractor models (304 early), (175UK, 178UK with multipower transmission serial number up to 728921), (204, 205, 2200, 50 all with hydraulic shuttle transmission), (30 with instant reverse, early), (40 with instant reverse, late), (50A with instant reverse serial number up to DC1222), (2500 with instant reverse serial number up to 9A70308), (180 with 6 speed or multi power transmission serial number CW6805), (148, 168, 185, 188 all with 8 speed or multipower transmission). Replaces 887128AM91, 882503M91. (Item #: 172307, Ref: 1886634M91) $252.00

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a tapered hole for a Set Screw. It measures 1.03 inches in diameter and is 3.26 inches long. Replace Massey Ferguson part numbers 894799M1. Used on Massey Ferguson models: 135, 150, 165, 175, 178, 180, 30, 31, 3165, 375, 383, 390, 390T, 393, 398, 40, 50 (Item #: 180205, Ref: 894799M1) $17.50

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $23.40

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Item #: 172320, Ref: 894772M2) $409.00

Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.60

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.50

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.30

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.00

Rear Oil Seal - Rear axle or differential carrier plate oil seal. 3.198 inch outside diameter, 2.125 inch inside diameter, .812 inch width. For tractors: MF65, MF85, Super 90, MF135 orchard, MF150, MF165, MF175, MF180 industrials: 30, 40, 50, 203, 205, 302, 304 also MF1080, MF1085, MF235 orchard, MF255, MF275, MF285 with dry brakes. Used as clutch bearing support assembly seal on tractors: MF2675, MF2705, MF2745, MF2775, MF2805. For 10, 126, 130, 220, 224, 228. (Item #: 128529, Ref: 832954M3) $14.20

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.50

Seal, Rear Axle, Inner - 3.375 inch outside diameter, 2.350 inch inside diameter, .890 inches wide. For tractor models 1080, 150, 165, 175, 178, 180, 30, 31, 40, (135, 235 Orchards), (1085, 255, 265, 275, 285 all with Dry Brakes). (Item #: 113783, Ref: 894782M2) $17.40

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Item #: 168885, Ref: 1860773M1) $51.00

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $48.11

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Item #: 182886, Ref: 1678864M1) $41.20

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Trans Gasket Kit - Gasket set, transmission overhaul. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182662, Ref: 830979M93) $67.00

Transmission Fill Plug - For tractor models TE20, TEA20, TO20, TO30, 35, 40, 50, 135, 231, 240, 250 2135. Replaces 768300M1, 180580M1 and 3799441M2. Plug has a 2.3 inch outside diameter flange. (Item #: 115163, Ref: 9N7010) $6.30

Transmission Main Input Shaft, 25 Teeth - For Constant Mesh 8 speed transmission in: 285, 298, 1085. Fits industrials: 20F, 40E, 50F, 50H, 60H. (Item #: 180607, Ref: 908493M3) $187.00

Transmission Pump Seal - This Transmission Pump Seal is used on 2200, 30, 40, 50, 30B, 40B, 50A, 50C, 30D, 30E, 40E, 50D, 50E, 60, 2500, 4500 FORKLIFT, 6500 Replaces 884422M1 (Item #: 179609, Ref: D8NN7N089AA) $18.40

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $6.50

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.10

Electrical System

Alternator - For Perkins AG3-152 gas and A6-354 Diesel engines in tractors: MF135, MF150, MF1100, MF1130. Industrials: 20, 30, 40, 50. (Item #: 113606, Ref: ADR0231) $120.00

Alternator - 12 volt, 63 amp. Will replace original 55 amp. For tractor models (230 up to serial number 9A349238), (245 serial number 9A349239 and up), (255 diesel), 30, 30D, 40U, (50C serial number 9A324304 and up), (6000 1974 to 1975), 750, (760 up to serial number 1746009412). (Item #: 111768, Ref: 579880M91) $113.00

Battery Door Without Hole - For Massey Ferguson tractor models 20, 30, 40, 240, 250, Replaces Massey Ferguson OEM number 1893487M92, Doesn't Include Hole, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155793) $38.90

Distributor Cap, 3 Cylinder - For 3-cylinder 152 GAS Perkins engine used on: 20, 40, 135, 150, 2200, 2500. (Item #: 108127, Ref: 1035263M1) $19.90

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $17.00

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.50

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Item #: 112273, Ref: 376852R91) $10.90

Ignition Switch - This ignition and starter switch with keys, has 3 terminals. For gas tractors: 50, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 1100, 1130, 1500, 1800 industrials: 20, 20C, 30, 30B, 40, 2135, 2200, 3165 combine: 410 skid steer loader: 811. For 1100, 1130, 135, 1500, 150, 165, 175, 1800, 180, 20C, 20, 2135, 2200, 230, 235, 245, 255, 265, 30B, 30, 3165, 40, 410, 50, 811. Replaces 194747M91, 194747V91, 194747M1, PASC780 (Item #: 128083, Ref: 194747M91) $20.50

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $28.30

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.30

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $12.80

Pulley, Generator - This generator pulley measure 4 1/2 inches in diameter, for a .575 inch shaft and uses a 1/2 inch belt. For tractor models 135 UK, 165 UK, 168, 175 UK, 178, 185, 188, 35FE, 35X, 40 SN# UA164181D->, 50. For Lucas Generator. Replaces 31141425, 731003M2 (Item #: 173298, Ref: 731003M2) $39.20

No
Picture
Solenoid - For Massey Ferguson tractor models 20, 40, 135, 150, 2135, 2200, Replaces Massey Ferguson OEM number 70243857, Delco Remy, Volts: 12, (Item #: 176924) $27.00

Spark Plug Wire Set, 3-Cylinder Perkins - Custom wire set fits GAS Perkins engines in TRACTORS: 135, 150. INDUSTRIALS: 20, 40 . FORKLIFT: 2500. Wire lengths are 13, 13, 10, and 8 inch coil wire. (Item #: 113764, Ref: S.42780) $28.90

Starter - This is a new Delco Style Starter. 10 teeth, clockwise rotation, 12 Volt. For tractor models 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40, 65. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93 (Item #: 168794, Ref: 515913M91) $320.00

Starter - This Lucas style starter is for 12 volt, 10 tooth, clockwise rotation. 3-bolt mount, Diesel engines. For tractor models (205, 250SP 1966 to 1972 with Chrysler H-170), (FE65 1956 to 1962 diesel), (20, 40 1970 to 1971), (35 1960 to 1968), (65 1959 to 1964), (135 1964 to 1973 with Perkins 152 diesel), (148 1964 to 1972 with Perkins 152 diesel), (154 1986 to 1989), (154 1980 to 1981 with Perkins 152 diesel), (165 1964 to 1969 with Perkins 203 diesel), (184 1980 to 1985 with Perkins 236 diesel), (263T from 1993 up), (364 1989 to 1993 with Perkins 152 diesel), (2135 1964 to 1968), (702 1959 to 1962). Replaces; Delco: 1107870, 1107512, 12301330, 1107853, 1107860, Dixie: TS-1036, 260-62143, Massey Ferguson: 191091M92, 515913M93, 579934M91, 513913M92, 1900434M91, 191081M93, 1403617M91, 515913M92, 189117M91, 1903617M91, 513913M91 1107503. (Item #: 111745, Ref: SLU0008) $231.00

Starter - This is an Off Set Gear Reduction replacement for 515913M91. It is used on 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93, 1868283M5 (Item #: 181965) $151.00

Starter - This New Starter is used on Massey Ferguson with Perkins Gas with replacing Delco 1108379, 1108397, 1109082. This is a 12 Volt Starter, 10 Teeth, Clockwise rotation, Direct Drive Delco 10MT Type. Replaces 410-12298N, 410-12298R, SDR0269, 1108379, 1108397, 1109082, 323-650, 3511, 1903107M91, 518671M91, 579837M91. (Item #: 185485, Ref: 518671M91) $322.00

Starter Drive - Drive assembly. For Continental Z145 in tractors: 135, 150, 165, 175, 178, 180, 20 Indust/Const, 202 Indust/Const, 205, 20C Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 230, 235 Indust/Const, 235 Orchard, 245, 245 Orchard, 2500 Forklift, 302 Indust/Const, 304 Indust/Const, 30B Indust/Const, 3165 Indust/Const, 35, 356 Indust/Const, 40, 4500 Forklift, 50 Indust/Const, 65 . Replaces Delco 1963808. 9 tooth, Clockwise Rotation, for Delco 10MT. Services starter 1108324. (Item #: 124822, Ref: 1025380M91) $29.68

Starter, LH Mount - Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $178.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit - This Tune-up Kit is used on Perkins 3 Cylinder Gas Tractors. Kit contains points, rotor, cap, custom length spark plug wire, and 3 Autolite 295 (3/8 inch reach, 13/16 hex) spark plugs. VERIFY PLUG NUMBER OR SIZE - THERE IS MORE THAN ONE OPTION FOR THESE MODELS. (Item #: 158890, Ref: S44011) $73.00

No
Picture
Tune-up Kit, 3/4 Inch Reach Plugs - For Perkins engine 3 cylinder Models: MF135, MF150, 20, 40, 2200, 2500. Comes with points, condenser, rotor and 3 spark plugs. Verify correct spark plug size and type (Item #: 184550, Ref: S.60965) $26.40

No
Picture
Tune-up Kit, 7/16 Inch Reach Plugs - For 3 cylinder Models: MF135, MF150, 20, 40, 2200, 2500. Contains points, condenser, rotor and 3 spark plugs. Verify correct spark plug size and type (Item #: S.61174) $16.08

Voltage Regulator - Voltage regulator, 12-volt. For MF tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces 1119507 1031060M1, 1031060M92, 1031060V92, 1031060M91, 1071060M91, 182548M1, 1903077M91, 508522M91 (Item #: 105289, Ref: 1031060M91) $22.20

Engine Bearings

Main Bearing Set, .010, Perkins 152 Gas or Diesel - .010 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746157M91 (Item #: 107163, Ref: 746157M91) $15.00

No
Picture
Main Bearing Set, .020, Perkins 152 Gas or Diesel - .020 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746158M91 (Item #: 107164, Ref: 746158M91) $18.40

No
Picture
Main Bearing Set, .030, Perkins 152 Gas or Diesel - .030 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746159M91 (Item #: 107165, Ref: 746159M91) $12.80

Main Bearing Set, STD, Perkins 152 Gas or Diesel - Fits 152 CID 3 cylinder gas or diesel engines. Standard Main Bearing Kit (4 pr). Thrust washers not included. Complete for 1 engine. For tractor models MF250, MF235, MF245, 20C, 30B, 200B, 2500, 4500, 20, MF230, 200, 2244, 2200, 2500, 203, 205, 40, MF135, MF150, 35, FE35, MF35, MF50. Replaces 746156M91 (Item #: 107162, Ref: 746156M91) $15.30

No
Picture
Rod Bearing Set - For Massey Ferguson tractor models 20, 35, 40, 50, 135, 150, 154-4, 230 (s/n 9A349239-earlier), 231S, 235, 240 (s/n N01001-earlier), 241, 245 (s/n 9A349239-earlier), 250, 251XE, 253, 254-4 (s/n 22210641-earlier), 254-4 (s/n 22210641-later), 263, 360, 451, 2135, 2200, 3315, 3330, 3340, 3350, 3355, Compatible with Massey Ferguson Construction and industrial models 20F, 30B, 30D Replaces Massey Ferguson OEM number 737071M91, , Compatible with Massey Harris tractor models 50, Replaces OEM number 31131172, Set of 3, 6 Halves, (Item #: 166853) $9.80

No
Picture
Rod Bearing Set, .010, Perkins 152 Gas or Diesel - Rod Bearing Set .010 inch. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737071M91 (Item #: 106997, Ref: 737071M91) $10.10

No
Picture
Rod Bearing Set, .020, Perkins 152 Gas or Diesel - Rod Bearing Set .020 inch. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737072M91 (Item #: 106998, Ref: 737072M91) $10.60

No
Picture
Rod Bearing Set, .030, Perkins 152 Gas or Diesel - Rod Bearing Set .030 inch. For: 200B, 200, MH203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737073M91 (Item #: 106999, Ref: 737073M91) $10.72

Rod Bearing Set, STD, Perkins 152 Gas or Diesel - Rod Bearing Set STANDARD. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737070M91 (Item #: 106996, Ref: 737070M91) $11.20

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $7.00

Thrust Washer Set - 4 Pieces - Tabbed. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50.735113M1 (Item #: 107167, Ref: 31137211_21) $7.00

Thrust Washers - Set of 4 Halves - FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and 6.354 Perkins Diesel Engine. Set of 4 halves, makes 2 complete thrust washers. (Item #: 107188, Ref: 31137551) $6.80

Engine Gaskets

Crankshaft seal, Front Lip Type, Perkins - Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255. (Item #: 107221, Ref: 1851747M1) $9.20

Crankshaft Seal, Rear, Lip Type, Perkins - Used on Perkins Engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine serial number prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine serial number prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, 285, 1080, 1085, 540. (Item #: 107230, Ref: 1447049M91) $19.90

Crankshaft Seal, Rear Rope Type, Perkins - Sold individually - requires 2. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Item #: 107228, Ref: 735866M1) $2.60

Gasket Set, Bottom Engine, Perkins 152 Diesel - Bottom engine set for a 152 cubic inch 3 Cylinder Perkins Diesel engines above serial number 19B8552. For models 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, FE35, MF135, MF150, MF235, MF245, MF35, MF50. Lower engine gasket sets are for engines using 2 piece rope type rear seal. Crankshaft Seals are not included. (Item #: 107305, Ref: 735232M92) $32.60

Gasket Set, Engine Bottom, Perkins 152 Gas - Fits 152 CID 3 cylinder gas engines 3.6 inch standard bore. Use with Head Gasket Set number 748007M91 for Complete Engine Overhaul Gasket Set. For tractor models 20, 2500, 40, MF135, MF150. (Item #: 107305, Ref: 738797M91) $32.60

Gasket Set, Engine Top, Perkins 152 - Fits 152 CID 3 cylinder gas and diesel engines 3.6 inch standard bore. Use with Bottom Gasket Set number 738797M91 for complete Engine Overhaul Gasket Set. For tractor models 20, 2500, 40, MF135, MF150. (Item #: 107247, Ref: 748007M91) $32.98

Head Gasket Set - For 135, 150, Industrial 20, 40 with Perkins G3.152 Gas Engine (Item #: 107250, Ref: HS85201) $35.00

Oil Pan Gasket - For tractor models TE20, TO20, TO30, TO35, 35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, 40, 35, 50. All Continental 4 cylinder engines. Replaces 1750024M1 (Item #: 107278, Ref: 1750024M1) $7.30

Oil Pan Gasket, Perkins 152 Gas or Diesel - Oil pan gasket. For 20, 200B, 203, 205, 20C, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF35, MF50. (Item #: 107280, Ref: MF3152PG) $8.40

No
Picture
Pan Gasket - This pan gasket is a 4 piece set for the Perkins AD3.152 and A3.152 engine in models 40, 135, 148, 254, 35. (Item #: 107280, Ref: VPC5346) $8.40

Rear Head Cover Gasket - For Massey Ferguson tractor models 20, 30, 35, 35X, 40, 50, 50A, 65, 80, 135, 150, 154, 154-4, 165, 230, 231, 235, 240, 245, 250, 254, 254-4, 255, 302, 304, 360, 364S, 399, 699, 1100, 1105, 1130, 1135, 2135, 2200, 2640, 3090, 3165, 3505, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Combine (s) 300, 510, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20, 40, 80, 203, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 4222004M1, 731128M1, , Compatible with Oliver tractor models 1850 Replaces Oliver OEM number 159070A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Replaces White OEM number 159070A, Replaces Perkins OEM number 36851416, 490485, (Item #: 113596) $9.30

Rope Seal Housing Gasket - This Rope Seal Housing Gasket is used on Perkins 144, 152 and 203 cubic inch, three and four cylinder engines with rope type rear seals. Replaces part numbers 957E6344A, 83934357, 136817168, 36817134, 36817168, 27847, 734664M1, 36817134, 734664M91, 4222068M1, 4222068V1 (Item #: 168419, Ref: 36817134) $4.80

Seal, Rear Main - FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch.303158411 (Item #: 107230, Ref: 1447049M91) $19.90

Timing Case to Block Gasket - Gasket for the timing case to block for tractor models Massey Ferguson 35, 135, 148, 230, 240, 250, 254, 254S, 255, 350, 353, 550, 363, and 253 with Engines A3.152 AD3.152 AT3.152 AT3.152.4 Replaces 36814119. Priced each. Price shown is for 2, sold only in multiples of 2 items. (Item #: 168423, Ref: 734238M1) $13.20

Timing Cover Gasket - Used with 3637397M91 timing Cover. Replaces 4224397M1, 36813136, 734661M1 (Item #: 168135, Ref: 734661M1) $9.80

Valve Cover Gasket - This Valve Cover Gasket is used on Tractors: 135, 150, 230, 235, 240, 245, 250, 253, 360 and Industrial Series 20, 203, 205, 2135, 2200, 154-4, 20C, 2500, 254-4, 30B, 30D, MF 40 All with Perkins 152 cubic inch gas or diesel engines. Replaces original part numbers 36811115, 735057M1, 033 - 7689, 2130099, 28108, 72080111 (Item #: 158290, Ref: 735057M1) $5.50

Engine Rebuild Kits

Basic Engine Kit, less bearings - Perkins 152 Gas - 152 CID 3 Cylinder Gas 3.6 inch standard bore. For tractor models MF135, MF150, IND. 20, 40, 2500 Forklift. Kit contains sleeves, pistons, rings, pins and retainers, pin bushings, gasket sets with crankshaft seals. Engine bearings must be ordered separately. Please see "Engine Bearings" category. (Item #: 183960, Ref: BEKP152G-LCB) $539.00

No
Picture
Basic Engine Kit, Perkins 152 Diesel - 152 CID 3 Cylinder Diesel Engine, 3.6 inch standard bore, injectors at angle in cylinder head, .150 inch flange thickness, with lip type rear seal. Basic Engine Overhaul Kit contains sleeves, pistons, rings, pins, retainers, pin bushings, gasket set and crankshaft seals. Engine bearings and thrust washers must be ordered separately. For engines with serial number ending in DL. Not for engines with S in serial number ending. Engines with S in ending use different pistons, rings and have valves with a 35 degree face angle. For tractor models 200B, 2500 engine serial number 152UA391044DL and up, 4500, 20 engine serial number 152UA391044DL, 40 engine serial number 152UA391044DL, MF230, MF235 both with serial number ending in DL, MF250 engine serial number prefix CE22488U only. (Item #: 184146, Ref: BEKP2337-LCB) $403.44

Basic In Frame Engine Kit, Perkins 152 Gas - 152 CID 3 cylinder gas 3.6 inch standard bore. For 135, 150, Ind. 20, 40 and 2500 forklift. Basic In-Frame Engine Kit includes: sleeve and piston kit with rings, pins and retainers, top engine set and oil pan gasket. (Item #: 189687, Ref: BIFP152G) $367.00

No
Picture
Engine Overhaul Kit, Perkins 152 Diesel - 152 CID 3 Cylinder Diesel Engine, 3.6 inch standard bore, injectors at angle in cylinder head, .150 inch flange thickness, with lip type rear seal. Basic Engine Overhaul Kit contains sleeves, pistons, rings, pins, retainers, pin bushings, gasket set and crankshaft seals, intake and exhaust valves, valve keys and guides, springs and retainers. Engine bearings and thrust washers must be ordered separately. For engines with serial number ending in DL. Not for engines with S in serial number ending. Engines with S in ending use different pistons, rings and have valves with a 35 degree face angle. For tractor models 200B, 2500 engine serial number 152UA391044DL and up, 4500, 20 engine serial number 152UA391044DL and up, 40 engine serial number 152UA391044DL and up, MF230, MF235 both with serial number ending in DL. (Item #: 186636, Ref: EOK2337-LCB) $502.28

Engine Overhaul Kit, Perkins 152 Gas - 152 CID 3 Cylinder Gas 3.6 inch standard bore. For 135, 150, Ind. 20, 40, 2500 forklift. Contains sleeve and piston kit: sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, intake and exhaust valves, valve keys, guides and springs. Bearings must be ordered separately. See "engine bearings". (Item #: 130864, Ref: EOK152G-LCB) $443.00

No
Picture
Major Engine Overhaul Kit, Perkins 152 Gas - For: 135, 150, 20, 40, 2500 Forklift, all with A3.152 Gas Engine, 3 cylinder, rope seal, 3.602 inch bore. Engine Major Overhaul Kit includes piston liner kit, main bearing set, connecting rod bearing/bushing/bolt set, thrust washer set, crank seal set, valve train kit, cam bushing set and gasket set. When ordering, specify in comments section bearing size of standard, .010, .020 or .030. (Item #: 130864, Ref: OK308) $443.00

Valve Overhaul Kit, Perkins 152 Gas - Valve Overhaul Kit. 152 CID 3 cylinder perkins gas 3.6 inch standard bore. Contains intake and exhaust valves, springs, keys, guides. For 20, 2500, 40, MF135, MF150. (Item #: 120331, Ref: VOKP152G) $110.00

Engine Parts

Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. Replaces 740407M1, 740407V1, 731087M1, 0050119, 31134151, 00505353, 81803978, 31134151 80505353, 296149A1, 957E6207 (Item #: 128688, Ref: 957E6207A) $2.70

Camshaft - Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Item #: 173283, Ref: 733507M1) $131.00

Camshaft Idler Gear - 90 tooth. For tractor models (135, 148, 150, 154-4, 154-4S, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 245, 250, 2500, 253, 254-4, 30b, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 550 all with A3.152 or AD3.152 gas or diesel engines), 5830, 5830FC, 5860, 5870, 6030FC. Replaces 31164362. (Item #: 172340, Ref: 731205M2) $82.00

Camshaft Timing Gear - 50 tooth, for engine type PE 144 A3.152/AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139 (Item #: 172327, Ref: 731203M1) $45.01

Connecting Rod - Verify casting number 0210007. For tractor models (135, 150, 20, 200, 203, 205, 2135, 220, 2200, 2244, 230, 235, 2500, 34B, 35, 356, 40, 50 with engine serial number ending in D, DL or DSL), 65. Has 9 inch CENTER TO CENTER measurement. (IF NEEDING 8.875 inch CENTER TO CENTER, ORDER PART NUMBER ZZ90010). Replaces: M7BJ0052, VPB6000, 3637439M91, 3637439V91, 52813, 59908, 731676M91, 735391M91, 747010M91, 747101M91, 81803971, 957E6200. (Item #: 173358, Ref: ZZ90011) $76.00

Connecting Rod - Verify casting number 31337220. For tractor models (365, 65 all engine serial number 2939035 not ending with DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL engine serial number 29C1085), 304 engine serial number 2939036-29C1084, (20C, 235, 245, 30B ALL engine serial number ending in DS), 250 engine serial number ending in DSL, 40 Industrial with AD3.152 and AT3.152 engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL with AD3.152 and AT3.152 engines), (155, 158, 165, 260, 560, 65, 765 ALL with AD4.203 engine). 8.875 Inch CENTER TO CENTER (IF NEEDING 9 Inch CENTER TO CENTER, ORDER NUMBER ZZ90011). Replaces: M7BJ0014, VPB6001, 31337220, 3637392M1, 3637392M91, 736386M91, 740596M91, 747008M91, 84774. (Item #: 123607, Ref: ZZ90010) $74.00

Connecting Rod Bolt and Nut Assembly - Used on Perkins Engines, this Bolt and Nut Assembly replaces OEM numbers 84264589, 370664S, 382885S2, 34447ES2B, 385279S2, 390655S2, 81803991, 957E6215, 957E6212, 957E-6215, 0095250, 1476245, 1476245X1, 375756X1, 355756X1, 33221327, 3639947M1, 33221319 (Item #: 183833, Ref: 957E6215) $4.90

Crankshaft - New. For Perkins 3 cylinder using ROPE SEAL. Note: In some cases you may have to reuse your old balancer weights. Call for details. Fits Perkins A3.152 and AD3.152 engines. Fits 50, 35, 30, 135, 235, Ind 20, 40, 202 Workbull, 2135, 2200. (Item #: 102112, Ref: 736532M91) $335.00

Crankshaft - This new crankshaft is for a Perkins engine using aLip Type Seal in AD3.152 and G3.152 engines, gas and diesel. All with casting number 31312701. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200. (Item #: 102113, Ref: 742827M91) $350.00

Crankshaft and Bearing Kit - Crankshaft Kit comes with standard main bearings, rod bearings and thrust washers. For Perkins AG3-152 Gas and AD3-152 Diesel Engines using 1 piece lip-type rear seal, keyed nose. Replaces U5BG0027, 742827M91, 3637399M91, 3637410M91. Does not come with weights. Fits 135, 230, 231, 240, 245, 250, 253, 360. INDUSTRIALS: 20, 20C, 40, 2135, 2200. (Item #: 185737, Ref: 3641825M91) $396.00

Crankshaft Assembly - Crankshaft kit with standard rod and main bearings and thrust washers. For Perkins Diesel A3-152 and AD3-152. Also Perkins 3 Cylinder gas with rope type rear seal. For 200, 203, 205, 20, 2135, 2200, 2244, 2500, 35, 40, MF135, MF150, MF235, MF35. This is for a 2 piece rope seal. (Item #: 168650, Ref: 3638309M91) $452.00

Crankshaft Gear - Used on 3-cylinder Perkins A3.152 and AD3.152 engines on: 30, 35, 50, 135, 235, 245. INDUSTRIALS: 20, 40, 202, 2135, 2200. Replace 02139014, 31163411, 31163491, 31163492, 31163493, 31163494, 31163495, 3637518M1, 3641085M1, 3641397M91, 3641826M1, 410132, 731228M1, 735599M1, 81804043, 957E6306 (Item #: 113700, Ref: 731228M1) $40.10

Crankshaft Kit with Bearings - Kit includes main and rod bearings and thrust washers. For 235 with Perkins <152UA381043DL 3.152 Diesel WITH ROPE SEAL, engine serial number ending with DS, (203, 205, 2135, all with Perkins A3.152 or AD3.152 Diesel Engine Sserial number ending with DS), (135, 150, 20, 2244, 35, 40, 50, all with Perkins A3.152 or AD3.152 Engine serial number <152UA381043DL). Uses 2 piece rope seal. Also Perkins 3 Cylinder Gas with Rope type seal. Replaces 084402, 736532M1. (Item #: 168650, Ref: 3638309M91) $452.00

Crankshaft Pulley, 3-Hole - For Perkins Engines. Fits Massey Ferguson Forklifts: 2500 and 4500. Massey Ferguson Industrial: 20 (Gas Engine serial number <152UA22587A, All Diesels), 20C (Diesel) 20D, 20F, 203 (Diesel), 205 (Diesel), 2135 (Utility), 2200, 30B (Diesel), 30D, 30E, 30H, 40 (Gas Engine serial number <152UA22587A, All Diesels), 40E, Tractors: TO35 (Equipped with 102 Loader), 135 (Gas Engine serial number <152UA22587A, All Diesel), 150 (Gas Engine serial number <152UA22587A, All Diesel), 230, 235 (Orchard), 245 (Orchard), 35 (Diesel), 35X (FE) (Diesel), 50 (Diesel), 65 (Engine serial nubmer <2820092). Uses 704812M93 hydraulic adapter plate. Replaces 31147784. (Item #: 118287, Ref: 734628M1) $78.00

Cylinder Head - This cylinder head assembly is for the Perkins AD3-152 direct injection diesel engine with the injectors at an angle in cylinder head. This assembly includes valves and valve parts and fits the following tractor models: 135, 150, M230, MF235, MF245; and industrial models: 20, 20C, 30B, 30D, 40, 203, 205, 2135, 2200 Treever; and Forklift models: 2200, 2500, 4500; and Crawler models: 200, 200B, 200C, 2244. It directly replaces cylinder heads 737704M91, 740595M91, and 743201M91. Originally, the 737704M91, 740595M91, and 743201M91 cylinder heads had valves with a 45 degree face angle, however, they are no longer supplied by the OEM. This 3637389M91 cylinder head is the same as supplied by the OEM and has valves with a 35 degree face angle. It Replaces ZZ080082, ZZ080025, 747574M91, and 4222810M91. (Item #: 160304, Ref: 3637389M91) $360.00

Cylinder Head - For tractor models 175, 180, 20, 255, 265, 275, 31, 40 all with Perkins A4.236 and A4.248 Diesel Engines. Cylinder head includes valves, guides and springs, assembled. Replaces ZZ080054, 743112M1. (Item #: 3637486M1) $847.98

Cylinder Head - This is a New Cylinder Head for Perkins AD4.203 Direct Injection Diesel Engine. It replaces part numbers 3637384M91, 737701M91, ZZ80033, M03-00-21 (Item #: 168493, Ref: 3637384M91) $559.00

Cylinder Head Bolt Kit - This Stud and Bolt kit for the cylinder head on AD3.152 Perkins engines. Head bolts replace head studs in some locations. For models 135, 150, 230, 235, 245, 250, 20, 200, 203, 205, 2135, 2200, 2244, 2500, 30B, 40, 40B, 4500. Replaces 734266M1, 32524131, 734309M1, 32524133, 736976M1, 32524138, 734308M1, 32524132, 1440275X1, 0920006, 353426X1, 33221315. (Item #: 183810, Ref: S.43676) $87.00

Cylinder Head, Remanufactured, Z134A601 - For Massey Ferguson tractor models TO35, 35, 40, 50, 135, 150, 202, 235, 245 (With Continental Gas Engine), Replaces Massey Ferguson Casting number Z134A601, Engine 134, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200496) $730.01

Cylinder Head, Used - For Massey Ferguson tractor models TO35, 35, 40, 50, 135 (150), 150, 202, 235, 245 (With Continental Gas Engine), Replaces Massey Ferguson Casting number Z134A601, Engine(s): 134, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200496, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400496) $327.01

Cylinder Head with Valves, Remanufactured, Z134A601 - For Massey Ferguson tractor models 35, 40, 50, 135, 150, 202, 235, 245 (With Continental Gas Engine), Replaces Massey Ferguson Casting number Z134A601, Engine 134, Cylinders: 4, Casting No. Z134A601, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 200513) $1275.01

No
Picture
Cylinder Head with Valves, Used - For Massey Ferguson tractor models 35, 40, 50, 135, 150, 202, 235, 245 (With Continental Gas Engine), Replaces Massey Ferguson Casting number Z134A601, Engine(s): 134, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200513, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400513) $445.01

No
Picture
Epicyclic Carrier Assembly - For Massey Ferguson tractor models TO35, 35X (FE, s/n 383154-earlier), 40, 65, Compatible with Massey Ferguson Construction and industrial models 765, Replaces Massey Ferguson OEM number 827719M91, (Item #: 170921) $284.00

Flywheel Gear, Perkins Engines - Flywheel Ring Gear. For Perkins engine in tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF383, Industrials: 20, 30, 40, 50. 115 teeth, 13-7/16 inch inside diameter. Replaces 410236. For 20, 30, 40, 50, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF383, MF50, MF65. (Item #: 101977, Ref: 731008M1) $28.20

Flywheel Plate - For tractor models 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Item #: 173138, Ref: 1040886M1) $75.28

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

No
Picture
Freeze Plug - Verify OEM part number of 159312A, 7208009, 731356V1. For tractor models 300, 410, 510, 540, 550, 750, 760, 850, 860, 2500, 4500, 20, 200, 2135, 2200, 30, 302, 304, 3165, 40, 50, 70, 80, 1130, 1135, 135, 150, 154-4, 165, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 263, 2640, 2675, 285, 298, 3090, 35, 35X, 3505, 3525, 3545, 3630, 364S, 3650, 399, MH50, 65, 698, 699. (Item #: 172875, Ref: 731356M1) $1.40

Freeze Plug - This Freeze Plug is 0.891 inches in diameter, 57/64 inch cup type. Used on Perkins engines. Verify size or part number before ordering. Replaces Massey Ferguson OEM nos 731999M1, Replaces JCB OEM nos 02100395, Replaces Leyland OEM nos AJR2098, Replaces Perkins OEM nos 0650664. (Item #: 174344) $1.90

Oil Pan - For 230, 235, 240, 245, 250, 20, 20C, 20D, 20E, 20F, 30B, 30D, 30E, 30H, 40, 40E, 2500, 4500, all with Lip Type Crank Seal. Also replaces 37172402. (Item #: 178987, Ref: 741600M1) $450.00

Planetary Shifter Coupler - For Massey Ferguson tractor models 30, 40, 50A, 60, 148, 158, 165, 168, 185, 188, 235, 245, 250, 255, 261, 265S, 270, 283, 285, 290, 342, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 550, 565, 590, 595, 650, 670, 675, 690, 698, 699, 1080, 1085, 1200, 1250, 4215, 4220, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500, Replaces Massey Ferguson OEM number 1866557M2, 1866557M1, Teeth: 28 and 22, (Item #: 151825) $22.98

Rocker Shaft - For tractor models 3 Cylinder Perkins 135, 150, 20, 200, 203, 205, 20C, 2135, 220, 2200 engine serial number ending in D, 2244, 230, 235, 245, 250, 2500, 30B, 35, 40, 50. Replaces 3637532M91, 731754M91, 1076971M91, U7LR0002, ZZ90047, 747938M91 (Item #: 133942, Ref: ZZ90047) $11.90

Tappet, Perkins Diesel - Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Item #: 165601, Ref: 731150M1) $8.80

Timing Cover, Front - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or T3.152 3 cylinder Perkins diesel engines. Replaces 3637397M91, 3637397V91, A5FH0245, ZZ90039, 737211M91, 740226M1, 747454M1, 733988M91, 737211M91. Uses 734661M1 Gasket, sold separately. (Item #: 184551, Ref: 3637397M91) $132.00

Timing Cover, Rear - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or AG3.152 3 cylinder Perkins engines. (Item #: 179030, Ref: 739477M1) $163.00

Valve, Exhaust, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, 65, 165. (Item #: 166347, Ref: 737640M1) $5.90

Valve, Exhaust, Perkins 152 Gas - Exhaust valve. 152 CID 3 Cylinder Gas Engine 3.6 inch standard bore. For 20, 2500, 40, MF135, MF150. (Item #: 167461, Ref: 739439M1) $7.40

Valve Guide, Perkins 152 Gas - Intake and exhaust. Price shown is for each, sold only in multiples of 6 items. For tractor models 20, 2500, 40, MF135, MF150. Replaces 4223455M1, 3313E734, 33261725, 3313E011, 3313E734, 3637527M1, 3313E734, 737020M1 (Item #: 184539, Ref: 3637527M1) $3.70

Valve, Intake, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, MF65, MF165. (Item #: 166921, Ref: 732811M1) $5.50

No
Picture
Valve, Intake, Perkins 152 Gas - Intake Valve. 152 CID 3 Cylinder Gas Engine 3.6 inch standard bore. For 20, 2500, 40, MF135, MF150. (Item #: 173373, Ref: 739641M1) $7.20

Valve Keys, Perkins - Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. Price shown is for each, sold only in multiples of 4 items. (Item #: 166933, Ref: 731155M1) $0.80

Valve Overhaul Kit, Perkins 152 Diesel - Valve Overhaul Kit. 152 CID 3 cylinder diesel, 3.6 inch standard bore, injectors at angle in cylinder head. Valves have a 45 degree face angle. Contains intake and exhaust valves, springs, keys, and guides. For 200B, 200, 203, 205, 20, 2135, 2200, 2244, 2500, 40, 4500, MF135, MF150, MF230, MF235. This kit may contain 12 or 6 springs depending on our supplier. They interchange. The springs in the 6 spring configuration have the same tension as the combined inner and outer spring in the 12 spring configuration. (Item #: 120224, Ref: VOKP152A) $67.00

No
Picture
Valve Service Kit - For tractor models 20, 2500, 40, MF135, MF150. Contains: springs, guides, locks, (no valves). (Item #: 184771, Ref: VSKP152G) $122.00

Valve Spring Cap - Used on many Perkins Engines, this Valve Spring cap replace: 747697M1, 731156M1, 957E6514, 747697M1, 747697V1, 747697V1, 33423148. (Item #: 191058, Ref: 747697M1) $19.00

Valve Spring, Inner, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each. \For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 166791, Ref: 731153M1) $0.98

No
Picture
Valve Spring, Outer, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each, sold only in multiples of 2 items. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 3356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 731154M1) $2.81

Valve Spring Seat, Lower - Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $14.90

Valve Tappet Adjusting Nut - This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Item #: 184396, Ref: 353430X1) $3.00

Valve Tappet Adjusting Screw - This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Item #: 183828, Ref: 32151116) $15.00

No
Picture
Valve Train Kit - For AD3.152 Perkins Diesel. With engine serial number ending in D. Kit includes 3 intake valves, 3 exhaust valves, 8 valve guides, 6 valve springs, 8 valve locks. (Item #: 120224, Ref: VTK302) $67.00

Engine Pistons and Sleeves

Piston, Perkins 5 Ring - This is a 5 ring, 3.6 inch standard bore piston and pin for Perkins AD3.152 and AD4.203 engines. Uses 836325M91 ring set. Replaces original part numbers: AHM2188, 3639048M1, 4223940M91, 4223940V91, 731154M1, 731154V1, 734466M91, 734467M91, 743824M91, 743824V91, 780006, M03-17-05, 033 - 7635, 2130017, 31083, 31084, 4223940Z91, 71019611, 743824Z91, 82111, 82112, 82137, 82147, 9Y-4687, GL47. (Item #: 168957, Ref: 734467M91) $37.30

Piston Pin Bushing - Fits 152 CID 3 Cylinder and 203 4 Cylinder Gas or Diesel Engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255.740407M1 (Item #: 128688, Ref: 957E6207A) $2.70

Piston Sleeve, Perkins 152 and 203 Gas or Diesel - Sleeve, CAST, replacing original CAST sleeve 734175M1, flange thickness .150 inch. Fits 152 CID 3 Cylinder and 203 CID 4 Cylinder Gas or Diesel Engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 35, 203, 205, FE35, MF35, MF50, 200, 2244, 2200, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, MF255, 40B, 50. (Item #: 128601, Ref: 739043M1) $23.10

No
Picture
Sleeve and Piston Kit - 3.60 Bore For 135, 150, Industrial 20, 40 with Perkins G3.152 Gas Engine (Item #: R3449) $248.06

Sleeve and Piston Kit, Perkins 152 Gas - Sleeve and Piston Kit. 152 CID 3 Cylinder Gas 3.6 inch standard bore. Contains sleeves, pistons and rings, pins and retainers. Complete for 3 cylinders. For Ind. 20, 40, 2500 Forklift, MF135, MF150. (Item #: PK152G) $283.01

No
Picture
Sleeve, Perkins 152 Diesel - For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Item #: 128601, Ref: 739043M1) $23.10

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.30

Engine Rings

No
Picture
Piston Ring Set - Fits D4.203 and 4.203 4 Cylinder Diesel Engines. For tractor models 135 engine serial number ending in D, 135 engine serial number ending in DL, 150 engine serial number ending in D, 20, 200 engine serial number ending in D, 203, 205, 20C engine serial number ending in DS, 2135 engine serial number ending in D, 2200 engine serial number ending in D, 2244 engine serial number ending in D, 230 engine serial number ending in D, 230 engine serial number ending in DL, 235 engine serial number ending in D, 235 engine serial number ending in DL, 235 engine serial number ending in DS, 245 engine serial number ending in DS, 2500 engine serial number ending in D, 30B engine serial number ending DS, 35, 356 engine serial number 2820092>, 365 engine serial number <2939035 not ending with DL, 40, 50, 65 engine serial number <2939035 not ending with DL, 65 engine serial number 2820092>. (Item #: 120667, Ref: 836325M91) $12.30

No
Picture
Piston Ring Set, 1 Cylinder, Perkins 152 or 203 Diesel - 152 or 203 CID diesel engine standard bore 3.6 inch. Ring set, for 1 piston, used with CAST sleeves only. For 20, 200, 200B, 203, 205, 2135, 2200, 2244, 2500, 30, 300, 302, 304, 3165, 35, 356, 40, 40B, 4500, 50, FE35, MF135, MF150, MF165, MF230, MF235, MF250, MF255, MF35, MF50, MF65, Super 92. Set includes 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. (Item #: 120667, Ref: 836325M91) $12.30

No
Picture
Piston Ring Set, Perkins 152 Gas - Ring set, for 1 piston. For 152 CID Perkins GAS Engine 3.6 inch standard bore. 2 rings at 3/32 inch and 1 at 1/4 inch. For tractor models 20, 2500, 40, MF135, MF150. (Item #: 121002, Ref: 745815M91) $20.80

Exhaust System

Exhaust Elbow - The new Manifold Exhaust Elbow fits Ferguson 40 (Horizontal Exhaust), Massey Ferguson 50 (Horizontal Exhaust) Massey Harris 50 (Horizontal Exhaust). It is used with 175185M1 Manifold. Replaces: 182604M1 (Item #: 114534, Ref: 182604M1) $83.00

Exhaust Pipe, Horizontal Exhaust - 1-3/8 inch inlet inside diameter, 12 inch vertical length, 34 inch horizontal length, 1-1/2 inch outlet outside diameter. For tractor models 40 Industrial, MF50, MH50 all with gas engines. (Item #: 120206, Ref: 182614M1) $58.00

Exhaust Pipe, Vertical - A= 1-3/8 inch inlet inside diameter, B= 8 inch vertical length, C= 31 inch horizontal length, D= 1-1/2 inch outlet outside diameter. For model 40 with gas engine. (Item #: 120207, Ref: 182697M1) $36.05

Intake Manifold - For 3 Cylinder Perkins in models 135, 150, 20, 20C, 20D, 20F, 203, 205, 2135, 2200, 230, 235, 240, 245, 30B, 30D, 30E, 40, 50), (2500, 4500 all Forklift). Inlet Manifold. (Item #: 113704, Ref: 734864M1) $32.20

Manifold - Exhaust on both ends. For tractor models 40, 50, 2200, 2500 all with Continental Gas Engines. Does not come with gaskets. If gaskets are needed order gasket set part number R4849G. Replaces 1752393M1, 1751851M1. Casting number: Z134E600. (Item #: 114535, Ref: 175185M1) $268.00

Manifold Gasket - Used on Perkins Engines with square center holes on the exhaust ports. It replaces original part numbers 4222050M1, 4222050V1, 735016M1. Priced each. (Item #: 101626, Ref: 735016M1) $1.00

Manifold Gasket Set - Include manifold to head gaskets and exhaust flange gaskets for manifold 175185M1. For model s, 40, 50, 2200, 2500. (Item #: 179525, Ref: R4849G) $16.60

Manifold To Elbow Stud and Nut - This Stud is 1-5/8 inches long with 3/8 UNF (Fine) Thread. It replaces 0826232, 731866M1, 731862M1, 734697M1, 10826403, 0826403, 0826439, 0826481 (Item #: 180454, Ref: 734697M1) $3.50

Muffler - Vertical or horizontal, round body 3-1/4 inch shell diameter, 2-1/2 inch inlet, 1-15/16 inch inlet inside diameter, 15-1/2 inch shell length, 2 inch outlet length, 1-3/8 inch outlet outside diameter, 18-1/2 inches overall length. For tractor models F40, MF50 with Gas or LP engine and side inlet 1957 to 1964. (Item #: 102433, Ref: 182609M91) $38.00

Muffler - New Muffler measures A= 2-1/2 inch inlet length, B= 2-1/8 inch inlet inside diameter, C= 24-3/8 inch shell length, D= 17-1/4 inch outlet length, E= 1-3/4 inch outlet outside diameter, F= 44-3/4 inches overall length. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4F, 274, 274S, 274SK, 294S-4S, 40, 50, 50E, 65, 765. (Item #: 102435, Ref: 898228M94) $66.00

Fuel System / Air Intake

Air Element Outer - Air cleaner element, outer, for dual element filter. For tractor models MF40 MF235 Orchard, MF245 Orchard, MF255, MF265. Outer Diameter 5.32 inches (135mm), Overall height 10.86 inches (276mm. (Item #: 168948, Ref: 1094056M91) $60.00

Air Filter - Measures: Inside Diameter: 2 1/32 inches (51.6mm), Outside Diameter: 3 9/16 inches (90.5mm), Length: 11 inches (279.4mm) this filter replaces 1088148M91 (Item #: 184807, Ref: AF1037) $35.20

Air Filter Element, Inner - Outside diameter top is 2-1/8 inches, outside diameter bottom 2-9/16 inches, inside diameter top 3/8 inches, inside diameter bottom 1 7/8 inches, height 10-5/16 inches. Inner Filter fits MF40 MF235 Orchard, MF245 Orchard, MF255, MF265. Replaces 1094269M91 (Item #: 121321, Ref: E6NN9R500DA) $51.00

Carburetor - Features reversible linkage. This Zenith carburetor outperforms the original carbs used on: TO35, 35, MF40, 50, 202, A145 Replaces Marvel-Schebler TSX605, TSX683, TSX882, TSXU834. Center to center on 2 mounting bolts is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100748, Ref: 12566) $426.00

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Note: Not for use with choke cable only choke rods. [Part No: 12566 will accept cable, slightly different spacing] (Item #: 113777, Ref: 181532M92) $110.00

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Cast Iron, like the original. (Item #: 185746, Ref: 533969M91) $213.00

Carburetor - Features reversible linkage. This Zenith style carburetor outperforms the original carbs used on: TO35, 35, MF40, 50, 202, A145 Replaces Marvel-Schebler TSX605, TSX683, TSX882, TSXU834. Center to center on 2 mounting bolts is 2 5/16 inches. Imported. 1 year warranty. (Item #: 184603, Ref: 12566B) $293.00

Carburetor Kit, Complete - This Complete Carburetor Kit is for Zenith Carburetor 13338 - Includes Basic Kit plus Fuel and Air Adjusting Screws and Jets. (Item #: 184458, Ref: R8288) $49.80

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: UT2223S, UT2418S, UT2612S. Replaces Carter number UT cast top and aluminum bottom. For the following tractor models: TO35, 35, 40, 50. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203778, Ref: 1605-CARB) $235.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX643, TSX882, TSX605. For the following tractor models: 35, 40, 50, 135, 204. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203821, Ref: 1608-CARB) $225.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13338. For the following tractor models: 40, 135. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203777, Ref: 1616-CARB) $235.01

Carburetor, Rebuilt - Fits TO35 (Deluxe and Standard), 35, 40, 50, 135, 150, 202, 2135 - replacement for OEM 183576M91, TSX683, TSX682. Add $25.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203336, Ref: 1712-CARB) $225.01

Choke Knob - For Massey Ferguson tractor models TO20, TO30, TO35, 35, 40, 50, 65, 85, 88 Replaces Massey Ferguson OEM number 193346M1, 180708M1, , Compatible with Massey Harris tractor models 50, Replaces OEM number TO9703, (Item #: 126115) $12.30

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.00

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $26.40

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.90

Fuel Filter, CAV type - Fuel filter for tractor models 410, 510, 8450, 865, Super 92, 1045, 20D, 20E, 20F, 2200, 25, 30E, 30H, 302, 304, 40, 40E, 60, 70, 80, 885, Super 90, 1080, 1085, 1100, 1105, 1130, 1135, 135, 135 UK, 150, 154-4, 165, 165 UK, 175 UK, 178 UK, 194-4, 231, 240, 50, 251, 253, 263, 2640, 265, 2675, 2705, 271, 274-4, 275 UK, 281, 282, 283 UK, 285. Replaces 1077260M91, 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20

Fuel Injector - This new Fuel Injector without injector seal is a CAV type with Perkins reference number 2645615. Used engine serial number 152UA220812E and up. Fits 135, 135 U.K., 150, 165, 20, 2135, 230, 235, 255, 30, 300, 302, 304, 3165, 40, 40B, 50 LOADER, 50A, 65. Replaces OEM part numbers 1446702M1, 1446788M91, 733272M91, 736800M91 NOTE: Most tractors used different injectors at different times of production. Verify OEM numbers before ordering. (Item #: 115682, Ref: 733272M91) $59.94

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Injector Fuel Line Set, 3 Cylinder - Set consists of 3 fuel lines. For tractor models 20, 230, (135, 150, 2200, 40 all with engine serial number 152UA138660D and up), (135 UK, 240 with AD3.152), 235 with engine serial number ending in D or DL, 200D, 30E with P.Shut, 3.152 engine build list: CE31116, CE31182, CE31183, 30H with 3.152, build list: CE31116, CE31138, CE31182, CE31183. Replaces Massey Ferguson OEM nos 3638623M91, 3638624M91, 3638625M91, 743602M91, 735306M91, 743604M91. For Fuel Line Seal Kit order 187517 (Item #: 162822, Ref: FPL2100) $56.00

Fuel Injector Nozzle - For tractor models (135, 150 up to serial number 152UA220812E), (165 serial number 203UA20974D and up), (255 up to serial number 203UA126251DL), (203, 205 with injector tag UB), (2135, 2200, (2500 Forklift up to serial number 152UA220812E), (30 up to serial number 152UA126251DL), (3165 serial number 203UA20974D and up), (40 up to serial number 152UA220812E), 50, (50A except with CAV injector). Replaces BDLL150S6372. (Item #: 179483, Ref: 1853019M91) $29.50

Fuel Injector Nozzle - For tractor models (135, 150 serial number 152UA220812E and up), (230 up to serial number CE21900U25745), (235 serial number ending in DS, DLS), (20 with CAV injectors), (2500 forklift serial number 152UA220812E and up), (30 serial number 152UA126251DL and up), (40 serial number 152UA220812E and up), (40B up to serial number CE21900U25745E), 4500 forklift, 50A with CAV injectors). Replaces BDLL150S6554. (Item #: 179481, Ref: 1446701M1) $30.10

Fuel Injector Nozzle Tip - For Massey Ferguson tractor models 20, 30, 40, 50, 50A, 65, 135 (UK), 150, 165, 230, 235, 255, 300, 302, 304, 2135, 3165, 3165 (All s/n 203UA290D - Earlier), Compatible with Massey Ferguson Construction and industrial models 40, 40B, 50, 50A, 300, 302, 304, 2135, 3165 (All s/n 203UA290D - Earlier), Replaces Massey Ferguson OEM number 1446702M1, This is the injector tip only, For whole injector use Item #: 115682, (Item #: 128031) $11.40

Fuel Injector Washer - One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03. (Item #: 168623, Ref: 921173) $0.60

Fuel Line - The fuel line is used from the tank valve to the lift pump. It is 17-3/4 inches long. 1/2 UNF thread fittings. Used on Massey Ferguson 20D, 20E, 20F, (30E Power Shuttle), (30E with thermal or ether start), 30H, 40E, (135 UK Engine serial number 152UA38571D and up), (240 below serial number N01001, with or without reserve fuel tank), (240 serial number N01001 - A20286, with ergonomic pedals), 240P, (250 with or without reserve fuel tank). Replaces 883712M92, 883712M94, 883712M93 (Item #: 163387, Ref: 883712M92) $9.40

Fuel Line Seal Kit - This kit includes: 4 33811115 (3/8 O.D. 1/4 I.D. 1/4 W) sleeves, 7 33811113 (7/16 O.D. 1/4 I.D. 1/4 W) sleeves, 4 33811112 (5/16 O.D. 3/16 I.D. 3/16 W) sleeves, and 8 921176 Injector Nozzle Washers. This will service the fuel lines on many 3- and 4-cylinder Perkins equipped models. Perkins 152, 203, 212, 236, 248 Diesel Engines. There will be extra pieces when servicing a 3-cylinder engine. Replaces Perkins 33811115, 33811113, 33811112, 921176, 0921176. Replaces Massey Ferguson 376527V1, 376527X1, 376525X1, 376525V1, 376524X1, 376524V1, 376518V1, 376518X1 (Item #: 187517) $13.00

Fuel Pump - For 148, 203, 20B, 20C, 20E, 20F, 230, 231, 240, 245, 250, 253, 254, 254-4, 255, 30B, 30D, 30E, 30H, 350, 353, 354, 355, 360, 363, 40, 40E, 550. Fuel Pump. 4 hole mount. Replaces 1447582M91, 2641712, 2641808, 4222090M91. (Item #: 117602, Ref: 3637292M1) $21.90

Fuel Pump - This fuel pump comes with gasket and is for tractor models 135, 150, 205, 40, 203, 205, 2135 all with engine serial number 152UA46497D and up and models 154-4, 230, 235, 240, 245, 20, 20C, 30B all with engine serial number up to U635849G, with Perkins AD3.152 ENGINE. This fuel pump has two mounting holes. Also replaces 2641311, 886062M9. (Item #: 117600, Ref: 3637307M91) $19.20

Fuel Pump Repair Kit - This kit repairs 3637307M91 2 bolt, 14475825M91 4 bolt, 3637292M1 4 bolt fuel lift pumps. Replace 1852113M91, 1896329M91, 1896434M91, 26410009, 26410087, 3640785M1, 4222125M91, 4222125V91, 740861M1 (Item #: 165257, Ref: S40567) $16.30

Fuel Shut Off - Fuel Shut Off and Strainer. For tractor models MF231, MF240 and MF250 without reserve tank. Industrials: 20D early, 30E, 40E. (Item #: 151837, Ref: 898540M91) $11.20

Fuel Tank Cap - For Massey Ferguson tractor models 20, 35, 35X, 40, 65, 135, 165, 175, 178, 231, 240, 240P, 250, 253, 261, 263, 270, 275, 283, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20B, 20C, 20D, 20E, 20F, 25, 30B, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 50HX, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 1698042M91, 1666439M91, 1876534M91, 828583M91, For gold color cap use Item #: 153639, (Item #: 113555) $14.00

Injection Line, Nbr 2 Cylinder - Replaces, 35342005, 735306M91, 35355283. For tractor models 135, 135 UK with AD3.152, 150, 20, 20D, 20F with AD3.152, 2200, 230, 235 with engine serial number: ENDING IN "D" OR "DL", 240 serial number: < N01001, 240 with AD3.152, 250 engine serial number PREFIXED with CE31089U, 250 with engine serial number PREFIXED with CE22488U, 30E, 30E POWER SHUTTLE, with engine BUILD LIST: CE31116, CE31182, CE31183, 30E with P.SHUT, 3.152 engine BUILD LIST: CE31116, CE31182, CE31183, 30H with 3.152, BUILD LIST: CE31116, CE31138, CE31182, CE31183, 30H with engine BUILD LIST: CE31116, CE31138, CE31182, CE31183, 40. (Item #: 162725, Ref: 3638624M91) $19.20

Injection Line, Nbr 3 Cylinder - Replaces, 35342005, 735306M91, 35355283. For tractor models 135, 135 UK with AD3.152, 150, 20, 20D, 20F with AD3.152, 2200, 230, 235 with engine serial number: ENDING IN "D" OR "DL", 240 serial number: < N01001, 240 with AD3.152, 250 engine serial number PREFIXED with CE31089U, 250 with engine serial number PREFIXED with CE22488U, 30E, 30E POWER SHUTTLE, with engine BUILD LIST: CE31116, CE31182, CE31183, 30E with P.SHUT, 3.152 engine BUILD LIST: CE31116, CE31182, CE31183, 30H with 3.152, BUILD LIST: CE31116, CE31138, CE31182, CE31183, 30H with engine BUILD LIST: CE31116, CE31138, CE31182, CE31183, 40. (Item #: 162726, Ref: 3638625M91) $27.50

Injection Pump - Fits AD3.152 engine. For tractor models MF135, MF135UK, MF150, MF235, MF245, Industrials MF20, MF40, MF200, MF200B, MF2135, MF2200, MF2500, MF4500. Replaces 1446012M1, CAV3230F240, CAV3230F180, CAV3230F190, CAV3230F350, 3230F350, 1447169M91, 1447169V91, 1446012M91, 1447169M91, 1447169V91, 3230060, 3230080, 3230180, 3230190, 3230240, 3230350, 3230450, 3230F060, 3230F080, 3230F180, 3230F190, 3230F240, 3230F450, 3830350, 3830F350, 880799M91, 882510M91, 886102M91. (Item #: 119902, Ref: 1447169M1) $770.00

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105 (Item #: 168625, Ref: 921176) $0.60

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $14.00

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 893501M91, 1446935M1, 2666108, 3583453M2, 3583543M2, 3583543V2, 1854125 (Item #: 118792, Ref: 3583543M2) $11.50

Tube Assembly, Tee Piece to Reservoir - Used on Massey Ferguson: 20E, 20F, (30E serial number below A0738, with power shuttle), (30E with Thermal Start), 135 UK, (240 serial number below N01001, with reserve fuel tank), (250 with reserve fuel tank), (35 with Perkins A3.152), (35X (FE) with Perkins A3.152). Replaces 884473M92 (Item #: 174635, Ref: 884473M92) $14.20

Gauges

Fuel Sending Unit - Fuel sending unit has 2 leads and is for tractors with Perkins Gas or Diesel Engine in models 135, (20, 40 all except serial number 9A196065-9A205691), (203 serial number 659002115 and up), (205 serial number 659101250 and up), (2135 diesel), (35 serial number 209079 and up with diesel engine). This sending unit will not work in 6 inch deep tanks. Replaces 189132M91. (Item #: 119747, Ref: 1079398M91) $61.00

Tachometer Cable - 27 inches long, 7/8 inch drive end, 5/8 load end. Replaces 1699381M91, 828033M92, 967572M1, 828033M1, 1850699M2, 1850700M1, 1851825M1, 882539M1, 882539M91, 890232M1, 890232M91, 890420M1, 890460M91. For tractor models 20B, 20D, 20E, 20F, 30E, 40, 135 UK, 230, 240, 250, 35, 550 UK, 590, 65, 765. (Item #: 104133, Ref: 1699381M92) $15.70

Tachometer Drive Adapter - This Tachometer (Tractormeter) Drive Connector is used with 731208M1 Tachometer Drive Housing in Perkins 152 CID 3 Cylinder Engines and Perkins 203 4 cylinder. It Replaces Perkins 33473106. Replaces Massey: 735889M1 (Item #: 169993, Ref: 33473106) $7.30

Tachometer Drive Housing - This Tachometer is used on Perkins 152 cubic inch, three cylinder engines. Fits models 135, 150, 230, 235, 240, 245, 250, 20, 203, 205, 2135, 2200. 154-4, 20C, 2500, 254-4, 30B, 30D, MF 35, MF 40, MF 50. Uses 63676M1 seal, 731209M1 gasket and 33473106 tachometer drive adapter (each sold separately). It Replaces 37416751 and 731208M1. (Item #: 179633, Ref: 731208M1) $15.00

Tachometer Drive Housing Gasket - This Tachometer Drive Housing Gasket is used with 731208M1 Tachometer Drive Housing. It is used on Perkins 152 CID 3 cylinder engine. It replaces 731209M1, 36862511 (Item #: 178131, Ref: 731209M1) $2.30

Tachometer Drive Housing Seal - This Tachometer Drive Housing Seal is used with 731208M1 Tachometer Housing on Perkins 152 CID 3 Cylinder and 203 4 cyllinder Engines. It replaces 636762M1, 72080025, 63676M1 (Item #: 169991, Ref: 636762M1) $3.40

Tachometer Housing Kit - This Kit contains one each of: 731208M1 Tachometer Drive Housing, 63676M1 Seal, 731209M1 Gasket and 33473106 Tachometer Drive Adapter. It is used on Perkins 152 CID 3 Cylinder Engines. (Item #: 183588, Ref: B2830) $30.00

Temperature Gauge - For Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 205, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1078125M91, 180727M91, 181512M1, 1850512M94, 881396M91, 899455M91, Replaces Allis Chalmers OEM number 70226966, Replaces Minneapolis Moline OEM number 10A21284, 10A2229, 15A9741, Replaces Oliver OEM number 100679A, Replaces White OEM number 30-3485587, 60" Capillary Tube, 2" Diameter, 5/8" -18 UNF Connector, (Item #: 108057) $21.20

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $23.50

Hitch / Drawbar

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

Drawbar - Rear, Curved - For Massey Ferguson tractor models 40, 50, 275, 375, 383, 390, 398, 399, Replaces Massey Ferguson OEM number 1869060M1, 33.130" Long, 3.750" Wide, 1.380" Thick, (2) 1.031" diameter holes at 1.250" and 5.780" from front pin, .88" Offset Bend, 11.50" From Rear, Additional Handling and Oversize Fees Apply To This Item, (Item #: 159114) $225.00

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $20.98

Lower Lift Arm Attaching Shaft - Replacing Massey Ferguson part numbers 184356M1, 893419M1, this shaft comes with hardware. It is 3/4 UNF thread on both sides. Used on Massey Ferguson 1080, 133, 135, 140, 145, 150, 152, 155, 165, 175, 178, 180, 30, 31, 40, 50, 65, 765, 865. Verify part number or thread size before ordering. Many of the models used more than one size. (Item #: 174701, Ref: 893419M1) $12.80

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.80

Rocker Link - For tractor models 135, 150, 165, 20, 203, 205, 20C, 2135, 2200, 230, 245, 30, 302, 304, 3165, 40, 50, F40, FE35. (Item #: 165755, Ref: 180973M2) $22.60

Shaft Level Box - Shaft and pinion, leveling box, 14-5/8 inches long, 3/4 inch NC threads. For tractors: MF65 Hi-Clearance, MF150 Row Crop, MF165 Row Crop Industrials: 30, 40. (Item #: 113926, Ref: 897681M2) $15.10

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $5.40

Hydraulic System

Adapter Plate Bushing, Set of 4 - Set of 4 Rubber Bushing for front mount hydraulic adapter plates. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 and 708639M91. For 1134, 1143, 1144, 1153, 1163, 1164, 1183, 24, 260, 33, 34, 43, 44, 44-0, 44S, 540, 54C, 62, 63, 63C, 64, 82, 83 NOTE: Order 1 for a set of 4. (Item #: 173266, Ref: 1400022M91) $22.60

Control Lever Roller - Used on Mark I and Mark II Massey Ferguson hydraulic pumps, this roller fits some of the following models: 20, 20C, 202, 203, 205, 2135, 2200, 30, 302, 304, 31, 3165, 40, FE135, 135, 135 UK, 150, 165, 175, 180, 230, 245 (Item #: 179419, Ref: 898202M1) $5.20

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.80

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $17.80

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $21.30

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.00

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $13.50

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.40

No
Picture
Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Item #: 170866, Ref: 1870243M92) $12.80

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $6.10

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $440.00

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $115.00

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $29.00

Hydraulic Gear Pump - For (MF30, MF40, 30, 40) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 44 ALL BACKHOE) (2200, 2500, 4500, 5400H, 6500, 6500H, 6800 ALL FORKLIFT) (2244, 400C ALL CRAWLER) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 54 ALL BACKHOE) (2200, 2500, 4500, 6500, 6500H, 6800, 6800H ALL FORKLIFT) (2244, 400C ALL CRAWLER). Hydraulic Gear Pump. Note: Includes adaptor. Ports are located on side of rear housing. CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, PORT SIZE INLET: 1-5/8 inch -12 ORB, PORT SIZE OUTLET: 1-5/16 inch -12 ORB, MOUNTING: 2 bolt SAE "B", CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIA: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inch -12 ORB, OUTLET: 1-5/16 inch -12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $760.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle serial number FE101> without pressure control), (30B, 40 all axle serial number FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Item #: 113740, Ref: 1683301M92) $465.00

Hydraulic Piston - This is an early style 3-3/8 inch, three ring piston. It uses 3 - 897597M1 rings, sold separately. Used on 135, 135 UK, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31 combine, 20, 30, 175 UK, 178 UK, 20C, 30B, 40B, 50C, 50D, MF 40. Replaces 899596M91 (Item #: 179572, Ref: 899596M91) $37.00

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Item #: 173143, Ref: 1665738M91) $48.37

Hydraulic Piston Ring - Used on 899596M91 3 -3/8 inch piston. Three are required. Priced and sold individually. Replaces original part number 897597M1. For tractor models 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31, 20, 30, 175, 178, 20C, 30B, 40B, 50C, 50D and 40. (Item #: 176230, Ref: 897597M1) $6.10

Hydraulic Pump - Hydraulic Pump, front mount, for backhoes, crawlers, forklifts and loaders. 7/8 inch outside diameter, 13 spline, 21.5 GPM, 2000 rpm. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inch. Maximum is 6 7/8 inch. For 30, 32, 34A, 34B, 40, 52, 54, 100, 200, 212, 225, 235, 400C, 2200, 2244, 2500, 4500, 6500. Hydraulic Pump. H10190RF210RM adapter included. (Item #: 127269, Ref: 2750128M91) $760.00

Hydraulic Pump Camshaft - This new Hydraulic Pump Camshaft has 10 Splines. It is used on some Massey Ferguson Models: 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 285, 30, 31, 3165, 40, 50. Some of these models used a 21 spline shaft. Verify before ordering. Replaces part numbers: 1809105M91, 1809048M1, 889154M91, 899154M91, 899915M92 (Item #: 165602, Ref: 1809105M91) $83.00

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $6.20

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring and Gasket Kit is used on 135, 150, 165, 175, 180, 255, 265, 275, 30, 31, 40, 3165. It replaces 1810684M92 (Item #: 173310, Ref: 1810684M92) $7.10

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Peg with Hand Bake - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 20F, 230, 240, 250, 253, 261, 275, 283, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. This peg supports the hydraulic pump on the inside of the tractor, and a hand brake on the outside of the tractor. If you need a gasket, order part number 180904M1. (Item #: 189383, Ref: 898937M1) $34.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.60

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.90

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.10

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $509.00

Lift Arm - For tractor models 135, 175, 235, 230, 245, 202, 204, 203, 205, 302, 304, 2135, 3165, 2200, 30, 20, 40, 40B, 40C. Hydraulic Lift Arm, right or left. 51 Spline. Used with 897567M3 Cross Shaft REPLACES : 885445M91 Check Side Before Ordering Because Arm Is Used As RH On Some Models And RH and LH On Others (A) (Item #: 160183, Ref: 885444M91) $58.00

Lift Arm - Left Hand Lift Arm. For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Item #: 160184, Ref: 885446M1) $144.00

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.30

Lift Cover - This lift cover is used on many Massey Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Item #: 173139, Ref: 3761903M91) $582.00

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - Cylinder, hydraulic lift for 3-1/8 inch diameter piston. For tractors: MF135, MF150, MF165, MF230, MF235, MF240, MF245, MF250, MF282 Industrials: 20, 20C, 20D, 30, 30E, 40 202, 203, 204, 205, 302, 304, 2135, 3165. Use with 1665737M91 piston with rings. Replaces 897560M1, 897560M2 (Item #: 163456, Ref: 897560M3) $128.00

Lift Cylinder - For MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 290, Ind. 20, 20C, 30, 30B, 40, 40B, 50C. Lift cylinder for 3 3/8 inch piston. (Item #: 163480, Ref: 1671082M1) $106.00

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Item #: 173353, Ref: 2528201K1) $6.80

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Item #: 184692, Ref: 1665737M91) $47.90

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $10.30

Lift Pump - For tractor models (135 UK serial number <116248 with multi-power transmission), 135, 150, 165, 180, Industrials 20, 30, 40, 3165. All with 10 spline camshaft. Replaces 1684582T, 1869615M91, 886331M92, 886682M97, 886683M92, 886684M97. (Item #: 112583, Ref: 1684582M92) $340.00

Lift Pump Adapter Plate - For 35, 150, 65, 135, 50, 235, 245, IND: 20, 20C, 30, 30B, 30D, 35, 40, 50, 202, 203, 204, 205, 2135, 2200. Front Mounted Hydraulic Pump Adapter Plate. 5 1/4 inch diameter with 3 bushings, mounting holes 3 3/8 inch on center, 3/4 inch left hand threaded center hole. (Item #: 118288, Ref: 704812M93) $68.00

Lift Pump Adapter Plate - For 135 Orchard, 165, 175, Ind: 30 40B, 50A, 50C, 50D, 2200, 3165. Adapter Plate, 5 1/4 inch diameter with 4 bushings, mounting holes 4 inch on center, 7/8 inch threaded center hole. For crankshaft pulley on tractors front mounted hydraulic pump drive. (Item #: 128494, Ref: 708639M91) $87.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $13.50

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $59.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $9.80

Lift Pump Filter - Filter element is top mount. 2-7/16 inch outside diameter, 1-29/32 inch inside diameter and 4 inches long. For tractors: MF35, MF50, MF65, MF85, MF88, MF90, MF1080 industrials: 202, 203, 204, 205, 302, 304, 2135, 2200, 3165. Also the following tractors with pumps having 10-spline camshaft: MF135, MF150, MF165, MF175, MF180 Industrials: 20, 30, 31, 40, 302, 304. For MF1100, MF1105, MF1130. Replaces 521451M1, 185551M92 (Item #: 172545, Ref: 521451M1) $10.60

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Overhaul Kit - For tractor models (135, 150, 165, 175, 178, 180, 20, 202, 203, 204, 205, 2200, 30, 302, 304, 3165, 40) FE135 Coventry, 2135 Turf Utility Narrow. Hydraulic Pump Overhaul Kit contains (2) A897491M1, (2) A-1860038M1, A-180924M2, A-180925M2, (4) A-897493M1, A-1810684M92, A-1810680M92, (2) A-1810678M91. 4 holes, 3/8 inch mounting bolt holes with .438 inch oil hole. (Item #: 173095, Ref: 556602) $223.00

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $6.20

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.10

Lift Pump Valve Assembly. - For tractor models 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, (40, 50 ALL INDUSTRIAL MODELS). Replaces 1660209M92. (Item #: 179514, Ref: 1862486M96) $45.65

Lift Pump Vertical Relief Valve - This Lift Pump is the same as 1684582M92 except that it has a vertical relief valve. You need to ensure that the position of this valve will fit your tractor models (135 UK serial number <116248 with multi-power transmission), 135, 150, 165, 175, 178, 180, Industrials 20, 30, 40, 2135. All with 10 spline camshaft. Replaces 1684582M92, 194698M91, 519343M98. (Item #: 113267, Ref: 1684582M92VERT) $308.00

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $81.00

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $46.24

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

$Massey Ferguson 40 Piston Ring, Hydraulic - 3 1\8, Pack of 3$
Piston Ring, Hydraulic - 3 1/8, Pack of 3 - For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 serial number up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. (Item #: 176222, Ref: 897564M1) $4.10

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.57

Pressure Control Shaft - Used on some or the following Massey Ferguson Models: 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E, this part measures 10 - 9/16 inches. Verify measurement before ordering as many of these models used more than one size. (Item #: 170902, Ref: 1870219M93) $19.30

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $4.20

Pressure Control Valve - This hydraulic pressure control valve fits the following tractor models: 30, 40, 235, 245, 261, 275, 282, 285 (serial number 9A349239 and below), 298, and 698. It replaces part numbers: 1680061M91, 1869966M94, and VPK1806. (Item #: 167933, Ref: 1680061M91) $145.00

Quadrant Stop Kit - For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1. (Item #: 126615, Ref: 9N521) $8.30

Quadrant Support - This Quadrant Support is used on 135, 135UK below serial number 439191, 150, 165, 165UK below serial number 132849, 175, 175UK, 178, 230 with Lift Cover 884612M92, 235 with Lift Cover 1861320M1, 255 with Lift Cover 1861320M1, 285, up to aerial number 9A349239, Industrial 20 with Lift Cover 1861320M1, 20C with Lift Cover 884612M92, 30 except those with Lift Cover 1870955M1, 31, 40 except those with Lift Cover 1870955M1, 2135, 3165. Replaces ORM part numbers 1884238M1, 1884283M1, 898197M1, 908553M2 (Item #: 173709, Ref: 1884238M1) $33.60

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $31.27

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Shaft - Drive shaft with coupler attached. For front mounted hydraulic pump drive, 11-5/8" overall length, adapter end 3/4" left hand threads, coupler end 7/8" 13-splines. For industrial: 40. For 40 (Item #: 173046, Ref: 708574M92) $156.00

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.90

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $19.40

Transmission and Hydraulic Filter - Filter, hydraulic oil cooler, multi-power transmission. Measures 4.5 inches long, 1 3/4 inch diameter with a 1 inch hole. For tractors: Super 90, MF135, MF165, MF175, MF180, MF1080, MF1100, MF1130 industrials: 30, 30B, 30E, 40, 50A, 50E, 50F, 204, 205, 302, 304. (Item #: 126305, Ref: 191855M4) $27.00

Lights

Clips, Bulb Retaining, (Pack of 4) - For tractor models F40, Super 90, TO20, TO30, TO35, 135, 150, 165, 35, 40, 5 0, 65, 85, 88, 98, MH22, MH23, MH33, MH44, MH44-6, MH50. 4 used per headlight (one pack) Replaces 1002808MI (sevicable), 1750642M1 (exactly like). (Item #: 126558, Ref: S.43070) $13.50

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $57.00

Headlight Bracket, Winged, Left - Winged Headlight Bracket for the left side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510439M1. (Item #: 111699, Ref: 9N13473) $22.40

Headlight Bracket, Winged, Right - Headlight Winged Bracket for the right side. For TO20, TO30, 20, 30, 35, 40, 50, 65, 95. Replaces 510438M1. (Item #: 111600, Ref: 9N13472) $20.70

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Item #: 111241, Ref: 373662R91) $10.00

Sealed Beam Bulb - This is a 12 volt, sealed beam bulb. It has three terminals on the back. It is 5-7/8 inches in diameter and 2-1/4 inches deep. It replaces part numbers 505085M1, 505085M91, 28A120 (Item #: 168001, Ref: 505085M1) $14.10

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.50

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.00

Tail Lite, License Light, Clear Glass Lens - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50. Uses Gasket FAA13447A, not included. (Item #: 1750664M1) $21.36

Tail Lite, License Light, Lens Gasket - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50.1750666M1 (Item #: 178109, Ref: FAA13447A) $4.50

Miscellaneous

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

Oil System

Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 and AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Item #: 121771, Ref: 731117M91) $7.70

Oil Fill Cap, Perkins Engines - This oil fill cap comes complete with chain. For models 35, 50, 35 Utility, 135, 150, 230, 235, 240, 20, 203, 205, 2135, 245, 250, 65, 65 UK, 165, 255, 302, 304, 30, 40, 3165, 390T, 393, 398, 3065, 3070, 175UK, 283, 290, 383, 390, 394, 690, 3060, 3074, 6150. Replaces original part numbers 2487854, 248854, 734962M1, 734962M91, 734962M93. YTO 734962M91 (Item #: 186882, Ref: 734962M91) $6.70

Oil Filler Plug - Rubber measures 1 7/16 inches in diameter. For tractor models with Perkins Engines: 1080, 1085, 135, 150, 165, 175, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 285, 298, 30, 30B, 30D, 31, 3165, 40, 4500, 50, 50A, 50C, 50D, 6500, 698, 70. Replaces 2487863. (Item #: 125397, Ref: 897105M1) $15.20

Oil Filter - Measuring 4-3/16 inches in length, 3-15/32 inches outside diameter with a 0.525 center stud hole diameter, this cartridge type filter replaces OEM numbers 835817M91, 1014219M92, 1003879M91, 840751M91, 835817V91, 1014219M92, 15434A, 452050A, 761515M1, 8152AB, AT212, O8926AB, T16546, VT2427. Used in Continental Gas applications. (Item #: 111097, Ref: 835817M91) $9.50

Oil Filter Adapter Kit, Spin On - Does not include filter. Order 113613 for the filter. For tractor models T030, TO35, 35, 40, 50, 135, 150, 202, 204, 2200, 2500, and MH50 with Z129, Z134 or Z145 Continental Engines. Engine Oil Filter Adapter Plate for spin on oil filter. Replaces: 1069954M91, 1051113M1, 1051114M1, 1051115M1 (Item #: 143112) $42.00

Oil Filter Head Gasket - This Oil Filter Head Gasket is used on Massey Ferguson tractors with Perkins Engines. Replaces 4222003M1, 0490514, 490514, 731124M1 (Item #: 166425, Ref: 731124M1) $1.30

Oil Filter Head to Block Bolt - This Bold is used on Perkins 144, 152 and 203 cubic inch engines. It is used to bolt on new spin on filter conversion heads. It measures 3/8 x 3 1/2 inch UNF thread. Replaces original part numbers 354505, 354505X1, 0096443, 10096443. (Replaces 354511X1, 4-1/4 inch bolts on original filter heads, to 3-1/2 inch bolts for spin on filter head.) (Item #: 178047, Ref: 354505X1) $2.40

Oil Filter, Spin On - Oil filter spin-on element. For tractors: MF135, MF150, MF165, MF235 industrials: 203, 204. Others with A3-152, AG3-152, AD3-152, A4-203, AD4-203. Replaces Perkins 2654408, S.40536. Measures 5 3/8 inches long and 3 1/8 inches diameter. (Item #: 180917, Ref: 1447082M1) $9.30

Oil Pan Drain Plug - This is a 3/4 inch 16 thread Oil Pan Drain Plug. Uses C9NN6734A washer, not included. It replaces original part numbers 376501X1, 735129M91, 748160M1 (Item #: 140610, Ref: C9NN6730B) $3.70

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pressure Switch - Oil pressure switch located directly behind the oil pressure gauge, uses blade type wire terminal. For Perkins diesel engines in tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 SN# 9A349239 and up, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF11 For 203, 205, 20C, 20, 2135, 302, 304, 30B, 30D, 30, 3165, 31, 40B, 40, 50A, 50C, 50D, 50, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF1155, MF135, MF1505, MF150, MF165, MF175, MF1805, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 121161, Ref: 509682M91) $14.10

Oil Pump - Oil Pump Assembly for Perkins Engines in tractors using AG3-152 Gas and A3-152 and AD3-152 Diesel Engines. Replaces 41314078, 736513M91. For tractor models 135, 150, 154-4, 1545, 165, 20, 200, 202, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 235, 240, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 35 Utility, 40, 4500, 4830FC, 50, 5500, 5830, 5830FC, 6030FC, 65. (Item #: 113912, Ref: 3638632M91) $65.00

Oil Pump Idler Gear - Replaces 41115025. For tractor models 135, 150, 154-4, 20, 200, 202, 203, 205, 20C, 20D, 20F, 2135, 2244, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 30H, 35, 40, 4500, 4830FC, 50, 5830, 6030FC, 8530FC. Also Replaces 736513M91, 41314078. (Item #: 170489, Ref: 733551M92) $40.50

Spin-On Oil Filter Kit - This Spin-on Oil Filter Kit will replace the cartridge type filter for models 150, 154-4, 165, 230, 231, 235, 240, 245, 254-4, 255, 20, 20C, 20F, 30, 30B, 30D, 40, 2500, 4500 forklift. Spin-on Filter Kit for A4.212, A4.236 and A4.248 engines. Contains head, gasket and filter. Uses Filter Part Numbers 1447048M1 or S.40538. (Item #: 192029, Ref: S.41489) $36.60

Spin-On Oil Filter Kit - This Oil Filter Kit is for tractor models 35, 135 65, 150, 165, 20, 20C, 230, 235, 245, 2500, 255. All with A3.152, AD3.152. A4.203 or AD4.203 Perkins gas and diesel engines. Contains head part number 741922M1, gasket and filter. Uses filter part numbers 1447082M1 or S.40536. This kit uses shorter bolts than the original, part number 354505X1, not included. (Item #: 182458, Ref: S.40533) $24.91

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $31.90

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $9.30

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Item #: 119997, Ref: 532888M1) $11.90

PTO Cap - For tractor models TO35, 135, 150, 165, 175, 180, 35, 40, 50, 65. Replaces 180313M1, 897268M1, 1868778M1 (Item #: 161741, Ref: 1868778M1) $26.70

PTO Gear - 32 outer teeth, 23 splines. For tractor models 165, 175, 20E, 20F, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 360, 375, 383, 390, 40, 40B, 50C. (Item #: 172305, Ref: 1872274M1) $86.00

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref: 1868532M1) $85.00

PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Item #: 153626, Ref: 899329M1) $92.00

PTO Gear, Used - For Massey Ferguson tractor models 30, 31, 40, 135, 150, 165, 175, 178, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 565, 575, 590, Compatible with Massey Ferguson Construction and industrial models 20, 30, 31, 40, 50, 50C, 202, 203, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 899329M1, Splines: 15, Teeth: 53, For a new version of this item use Item #: 153626, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460709) $70.01

PTO Housing Retainer O-Ring - This O-Ring is 3/16 inch in diameter and has a 2-7/8 inch inside diameter. It replaces OE numbers 195522M1, 70923936, 81801571, C5NN533A (Item #: 173311, Ref: 195522M1) $0.90

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1) $22.80

PTO Shaft - For tractor models 20, 20B, 20C, 20F, 282, 283, 30, 30D, 31, 390, 40, 40B, 40F, 50D, 50E, 50G, 240 LIVE, (245, 250, 270 ALL LIVE/IND PTO), (265, 275, ALL LIVE/IND PTO with WET BRAKE), 290 SINGLE SP PTO, 230 REAR AXLE serial number FD101/ CD 8028->LIVE, 235 serial number FD101->LIVE. This is a 540 RPM PTO Shaft, 24.125 inches long, 21 drive splines. (Item #: 156331, Ref: 1660288M91) $106.00

PTO Shaft - For 30 late production with dry brakes and Live PTO 165 UK serial number 130773-144682 with Live PTO, 135 UK serial number 439191 and up with Live PTO, 230 with rear axle serial number below FD101 or CD8028 with Live PTO, (255, 265, 275 all with dry brakes and Live PTO), 40 with dry brakes rear axle serial number below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with multi-power and standard transmission with Live PTO, 235 with rear axle serial number below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1/32 inches long, 21 drive splines. (Item #: 166771, Ref: 1868557M93) $158.00

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $62.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $23.00

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Item #: 173076, Ref: 180461M1) $12.60

Seats

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. (Item #: 113263, Ref: 181313M93) $69.98

Pan and Seat Cushion Set - Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1. (Item #: 178546, Ref: 1210-1604) $156.00

Pan Seat - This tractor seat is 19 inches wide with nine holes. For TE20, TO20, TO30, MF35, MF40, MF50. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $50.00

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $81.47

Seat Bumper, Rubber - For use in a flip top pan seat (NOT a bucket seat), .957inch head diameter, .302 inch stem length, 1.283 inch overall length. For tractor models TO20, TO30, 35, 40, (50 up to serial number 514381), 65 diesel special, 135, 202, 204, 2135. Replaces TO434A. (Item #: 126664, Ref: 180289M1) $6.70

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $64.00

Seat Cushion Set - Black seat cushion and backrest cover and inlay assembly. NOTE CUSHIONS MAY COME WITH WHITE PIPING. Consists of one MFCC13 and BR205. Fits later production MF235 and MF245 tractors with foam float seat. Replaces 181324M1, 181326M1, 513353M91. (Item #: 168734, Ref: FCX811) $119.00

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $45.20

Sheet Metal / Body Parts

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $105.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $104.00

Grill bar, Center - Center Grill Bar and Hinge For late MF40, 50, 65, MH50. Comes primed. (Item #: 173666, Ref: 183661M91) $132.32

Grill, Left Door - Left hand Grill. For late MF40, 50, 65. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104140, Ref: 183662M91) $175.00

Grill, Right Door - For late 40, 50, 65. Right Hand Grill. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104139, Ref: 182421M92) $197.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inch tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $0.90

Step Plate Hangar, LH - For tractor models models 135 with malleable axle serial number 641005087>, cast iron axle serial number 9A126107>, 135 ORCHARD with cast iron axle serial number 9A130003>, 20, 20C, 2135 UTILITY serial number 646000004>, TURF serial number 648000005>, 230, 235, 40. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 508470M3, 508470M2. (Item #: 172770, Ref: 508470M3) $74.00

Step Plate Hanger, RH Rear - For tractor models 135 with malleable axle serial number 641005087>, cast iron axle serial number 9A126107>, 135 ORCHARD with cast iron axle serial number 9A130003>, 20, 20C, 2135 UTILITY serial number 646000004>, TURF serial number 648000005>, 230, 235, 40. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 172687, Ref: 508469M2) $58.00

Toolbox - Metal comes primered, COLOR MAY VARY. Restoration Quality. 11 inches X 4 1/2 inches X 4 inches. Fits TRACTORS: TE20, TO20, TO30, TO35, 135, 165UK, 240, 250, 550, 560, 565, 575, 670, 690, 698, 699. Fits INDUSTRIALS: 20E, 20F, 30E, 40E, 50E. Replaces 1662749M91 AND 909616M94. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178901, Ref: 825633M91) $41.00

Steering

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.30

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $6.00

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $189.00

Front Axle Pivot Support - Replaces casting number 186069M1. For tractor models 150, 165, 302, 304, 356, 40, 50, 65. (Item #: 126511, Ref: 506913M91) $112.00

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.10

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $165.00

Power steering pump repair kit - For EARLY Models: 135, 148, 40, 550, 240. Verify OEM part number. (Item #: 173654, Ref: 1810529M91) $27.20

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $582.70

Power Steering Valve Kit - For tractor models 135, 148, 240, 40. (Item #: 173124, Ref: 894969M92) $17.90

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Spindle Bushing - 1.443 inch outside diameter, 1.238 inch inside diameter, 1.5 inches long. For tractor models 130, 150, 165, 40, 50, 65, 765, F40. (Item #: 102477, Ref: 196060M1) $8.60

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $5.50

$Massey Ferguson 40 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.00

Spindle, LH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102480, Ref: 182560M92) $94.60

Spindle, LH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102476, Ref: 182558M92) $103.00

Spindle, LH - This left hand spindle fits Massey Ferguson Industrial 40 and replaces OEM part number 519390M91. Dimension A 10.875 inch, Dimension B 1.495 inch, Dimension C 1.796 inch, Dimension D - 1.250 inch. Replaces 519391M91. The wheel bearing kit used for this spindle is part number WBKMF3. (Item #: 104986, Ref: 519391M91) $219.00

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle RH - This right hand spindle fits Massey Ferguson Industrial 40 and replaces OEM part number 519390M91. Dimension A 10.875 inch, Dimension B 1.495 inch, Dimension C 1.796 inch, Dimension D - 1.250 inch. Replaces 519390M91. The wheel bearing kit used for this spindle is part number WBKMF2. (Item #: 104985, Ref: 519390M91) $146.00

Spindle, RH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102479, Ref: 182559M92) $69.00

Spindle, RH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102475, Ref: 182557M92) $66.00

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.80

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Tie Rod End - Ball joint end assembly, for power steering cylinder with thread measurement going to the cylinder being 1/2 inch, fine thread. For tractor models MF235 Orchard Diesel, MF245 orchard with cylinder 519283M91, 519284M91, 532225M91 or 532226M91, MF265 serial number 9A324139 and up with cylinder 579149M91 and 579160M91, MF285 serial number 9A281393 and up Industrial. Replaces 1033035M92, 1033035M1. (Item #: 102498, Ref: 1033035M92) $23.00

Tie Rod End (LH) - This Tie Rod End has a 4.375 Inch (A) Threaded Shaft and is 11/16- 18 UN Left Hand Thread (B). Used on Massey Ferguson 2200, 40, (235 Orchard / Gas Serial number 9A223895 and up, /Diesel Serial Number 9A210647 and up), (245 Orchard Serial Number up to 9A349239). Replaces 1032716M91 (Item #: 116817, Ref: 1032716M91) $65.00

Tie Rod End (RH) - This Tie Rod End has a 4.375 Inch (A) Threaded Shaft and is 11/16- 18 UN Right Hand Thread (B). Used on Massey Ferguson 2200, 40, (235 Orchard / Gas Serial number 9A223895 and up, /Diesel Serial Number 9A210647 and up), (245 Orchard Serial Number up to 9A349239). Replaces 1032715M91 (Item #: 116815, Ref: 1032715M91) $64.00

Wheels

Cap - Hub Cap, front wheel, threaded outside 2-3/4 inch, with grease fitting. For front hubs with threaded recess. For tractors: MF250 with split rim 6.00 x 10, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690. Industrials: 20D fixed axle, 30E, 40E. For 1134, 1143, 1144, 1153, 1163, 1164, 1183. Replaces 882637M1, 882636M91 (Item #: 104975, Ref: 882637M1WF) $9.70

Dual Wheel Adapter - Used to double up rear rims and tires, this adapter has male and female 5/8 inch UNF threads. Verify threads before ordering. Replaces 1863857M1, 1863857V1, 184876M1 (Item #: 173352, Ref: 1863857M1) $6.00

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $6.10

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.30

Lug Nut, Rear Wheel - 5/8-18 (UNF) Thread. Uses a 1 1/16 inch wrench. Replaces C5NN1120F, 8N1134, 881162M2. (Item #: 109991, Ref: 8N1134) $1.90

Rear Wheel Bolt - This Rear Wheel Bolt is used from rear axle to center disc. 5/8 inch-18 thread (UNF) x 2-3/16 inch. Use with nut 8N1134. Used on 135, 150, 152, 158, 165, 175, 180, 20E, 20F, 235, 240, 245, 250, 255, 261, 265, 275, 282, 290 Brazilian, 290 US Built, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 60, 65, 765. Verify measurements and part numbers before ordering. Replaces C5NN1117D, C5NN1117K, C5NN1117R, VPH6506, VPH6534, 184272M1, 81815835, 893017M1, 98A625 (Item #: 108655, Ref: C5NN1117R) $2.88

Rear Wheel Center - This disc is used on multiple Massey Ferguson models. This is a Heavy Duty 24 inch Rear Wheel Disc. The 6 loops are on a 21 9/16 inch diameter circle. It uses 8 center lugs on a 6 inch bolt pattern. The center hole is 4 5/16 inches. Check measurements before ordering. Additional $10 shipping due to weight. Replaces 535455M1 (Item #: 159046, Ref: 535455M1) $225.00

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $0.70

Wheel Bearing Kit - For tractor models 35, 40, 50, 65, FE35, TE20, TO20, TO30, TO35. Kit contains 1 each: 15123 (Cone), 15245B (Cup), 09067 (Cone), 09195 (Cup), 180008M1 (Seal). Replaces 1810391M91, 835964M91. (Item #: 102486, Ref: WBKMF1) $23.80

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 serial number up to 306677), (203 serial number 65900300), (204 serial number up to 342537), (205 up to serial number 659100150), (2135 up to serial number 646992326), 255, 265, 275, 285, 40. (Item #: 102488, Ref: WBKMF3) $38.00

Wheel Hub - For tractor models 175, 202, 203, 204, 205, 220, 30, 31, 3165, 40. Uses WBKMF3 wheel bearing kit, not included. (Item #: 160890, Ref: 519276M91) $194.00

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.70

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.00

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.50

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.20

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.30

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $70.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.60

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $21.10

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.90

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $29.00

$Massey Ferguson 40 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 40 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Massey Ferguson 40 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 40 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Massey Ferguson 40 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 40 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 40 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Massey Ferguson 40 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.00

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $35.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.48

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $77.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $23.98

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $71.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $70.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $263.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $119.41

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.90

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $897.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1109.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $71.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.50

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $312.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $104.78

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $108.25

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $410.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $72.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $26.20

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $63.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $32.90

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.40

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $56.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $129.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $63.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $11.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $1.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $278.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $52.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $135.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $143.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $164.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00