FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 698 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Accessories / Supplies

Engine Block Heater - For tractor models 135, 150, 230, 231, 235, 240, 245, 250, 253, 254-4, 282, 283, 298, 360, 364S, 399, 698. Engine Block Heater for 1 1/4 inch opening in block. 600 watts, 120 volts. (Item #: 120029, Ref: 19841A91) $72.00

Belts

No
Picture
Belt - Fan, Set of 2 - For Massey Ferguson tractor models 670, 690, 698, Replaces Massey Ferguson OEM number 1686614M91, 0.438" x 54.625", Polyester Material, Set of 2, (Item #: 198269) $37.60

Brakes

Brake Cylinder - Master assembly. For tractor models (690, 698 with small double reservoir), 698T, 699. (Item #: 122668, Ref: 1682767M91) $81.00

Brake Cylinder Repair Kit - This brake cylinder repair kit is compatible with the following tractor models: 1014, 1024, 1114, 1134, 235, 245, 250, 255, 260, 265, 274SK, 275, 290, 294S, 298, 560, 565, 575, 590, 592, 595, 675, 690, and 698. Services brake cylinder number 1698670M91. (Item #: 121238, Ref: S.42317) $21.80

Brake Rod Seal - Brake Rod Seal MASSEY FERGUSON: seal, for brake pull rod, wet disc brakes. Fits into left and right lever brackets. Tractors: MF154-4S, MF174-4S, MF194-4, MF194-4F, MF245, MF250, MF253, MF254-4, MF255, MF265, MF270, MF274-4, MF275, MF282, MF283, MF285, MF290, MF294-4, MF298, MF670, MF690, MF698, MF699, MF1085. Industrials: 30D, 30E, 40E, 50D, 50E. Replaces 1667175M1. 1860959M1 (Item #: 105644, Ref: C5NN2N336A) $3.70

Brake Slave Cylinder - Left or Right hand Brake Slave Cylinder for models 1004, 1004T, 255, 260, 265, 270, 275, 290, 290 Brazilian, 290 US Built, 298, 375E Brazilian, 390E Brazilian, 50H, 560, 575, 590, 592, 595, 60H, 675, 690, 698, 698T, 699, HX. Replaces Landini 3186484M91 and 1676387M92, Massey Ferguson 1676387V92, 1676387M92 and 3186484M91. (Item #: 113742, Ref: 1676387M92) $57.00

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $15.70

Master Cylinder Seal Kit - To service 1682767M91 master cylinder. FOr Models: 670, 690, 698, 699. (Item #: 179995, Ref: 1810714M91) $34.10

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $2.00

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $15.90

Clutch Cover Release Lever Pin - Pivot pin, for clutch cover release lever to cover on tractors: MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF690, MF698, MF699 industrials: 20D, 30E, 35, 50E. Also used as an alternate on clutch covers manufactured in the United Kingdom for the following tractors: MF35, MF50, MF65 industrial: 20. For 20, 20D, 30E, 35, 50E, MF240, MF250, MF253, MF270, MF275, MF282, MF283, MF290, MF298, MF35, MF383, MF390, MF398, MF3989, MF399, MF50, MF65, MF690, MF698, MF699. Price shown is for each, sold only in multiples of 3 items. (Item #: 183795, Ref: 891826M1) $6.60

No
Picture
Clutch Disc - For Massey Ferguson tractor models 283, 298, 592, 595, 698, Replaces Massey Ferguson OEM number 3610281M92, 3412121M93, 1671691M91, Size: 13", Spline Diameter: 1.125", Spline Count: 10, Center: Solid, For a Remanufactured version of this sku use Item #: 206735, (Item #: 169847) $230.00

Clutch Disc, Remanufactured, 1671691M91 - For Massey Ferguson tractor models 283, 298, 698, Replaces Massey Ferguson OEM number 1671691M91, 3412121M93, 3610281M92, Clutch Size: 13", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 169847, (Item #: 206735) $129.00

Clutch Disc, Remanufactured, 1688187M91 - For Massey Ferguson tractor models 283, 298, 698, Replaces Massey Ferguson OEM number 1688187M91, 3610281M92, 1671691M91, 3412121M93, M1671691H6, Clutch Size: 13", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Lg Pads, (Item #: 206736) $219.00

Clutch Disc, Used - For Massey Ferguson tractor models 30, 35, 50, 65, 150, 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 523552M1, 1862289M2, 1869665M1, 1870879M1, 190177M1, 514276M1, 521282M1, 533326M2, 1870074M1, 1672626M1, O.D: 5.05", I.D: 3.457", Internal teeth: 57, Sold Each, For a new version of this item use Item #: 114029, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460628) $7.01

Clutch Finger Kit - This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Item #: 173290, Ref: VPG6001) $35.30

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.20

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.20

Clutch Spring - For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 35, 375, 390, 398, 550, 565, 575, 590, 595, 65, 675, 690, 698. All with multi power transmissions. (Item #: 169497, Ref: 186519M1) $4.00

Massey Ferguson 698 Independent PTO Clutch Pack Parts

Independent PTO Clutch Pack Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Lever - Clutch release lever, for split torque single clutch or dual clutch. For tractor models MF231, MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 industrials: 20D, 30E, 40E, 50E. Replaces 1810817M91. (Item #: 178543, Ref: 887898M1) $5.90

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly - For Massey Ferguson tractor models 298, 375, 390, 390T (s/n B18009 - earlier), 393, 396, 398 (s/n B18009 - earlier), 399, 592, 595, 698, 698T, 699, Replaces Massey Ferguson OEM number 1688208M91, 3599492M91, 3620414M91, 1692758M91, 3909541M91, 3620413M91, Pressure Plate Size: 13", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206879, (Item #: 122857) $447.00

PTO Clutch Plate - Clutch Plate, external teeth, for independent PTO, 7 required. For tractors: MF240, MF265, serial number 9A349239 and up 2-speed only, MF270, MF275 serial number 9A349239 and up 2-speed only, MF290, MF298, MF360, MF375, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 30E, 40E, 50E. For 50E, MF231, MF270, MF283, MF290, MF298, MF4800, MF4840, MF4880, MF4900, MF670, MF690, MF698, MF699. (Item #: 114030, Ref: 1870860M1) $5.10

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $22.50

Cooling System

Fan Blade - Six blade fan for 135, 150, 165, 230, 235, 245, 270, 283, 290, 298, 670, 690, 698, 50E, 174-45, 274-4, 294-4, Ind 20, 20C, 30, 30B, 30D, 40. Replaces 1874995M92, 3538983M91, 773010M1. 6 Blade Fan Blade, 16 Inch, 1 5/8 inch pilot hole and 1 3/4 inch square bolt pattern. (Item #: 123105, Ref: 3538983M91) $38.40

Radiator - This new radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection and is 100% leak tested. This radiator has 8 fins per inch and 4 rows of tubes. The core size is 23.5 inches tall and 18.75 inches inches wide. This radiator fits Massey Ferguson 298 (FRENCH) 698, 698T, 699, 1004, 1004T. Replaces 1680734M91. (Item #: 152364, Ref: 1680734M91) $991.68

No
Picture
Radiator - For 698, 699 (Item #: R2206) $1011.64

Radiator Hose - Inlet - For Massey Ferguson tractor models 365, 375, 383, 390, 390T, 393, 398, 698, Replaces Massey Ferguson OEM number 3637573M1, Replaces Perkins OEM number 3482T004, U5MH0047, 1.125" I.D., (Item #: 159445) $11.90

Radiator Hose - Lower - For Massey Ferguson tractor model 698, Replaces Massey Ferguson OEM number 1669806M1, 1669806V1, 1.650" I.D., For Hose Clamp use Item #: 130454, (Item #: 159281) $24.80

Radiator Hose - Upper - For Massey Ferguson tractor model 698, Replaces Massey Ferguson OEM number 1669805M1, 2.0" I.D., For Hose Clamp use Item #: 130469, (Item #: 159280) $19.41

No
Picture
Water Pump - For Massey Ferguson tractor models 698, 1080, 1085, Replaces Massey Ferguson OEM number 3641364M91, 3641887M91, 738711M91, 738750M91, 741106M91, 747446M91, Replaces Perkins OEM number U5MW0014, 41312419, 41312663, 41312747, Replaces Casting number 37712390, 37712391, Shaft Diameter: 3/4", Includes mounting gasket, Includes thermostat gasket, Without Pulley, Additional Handling and Oversize Fees Apply To This Item, (Item #: 122901) $184.30

Water Pump - For 595, 698, 1080, 1085 with Perkins 4.318 or 4.318.2 Diesel Engines. Without pulley. Shaft Diameter is 15/16" Verify shaft diameter before ordering. Replaces OEM part number 3641364M91, 738711M91, 738750M91, 741106M91, 747446M91, U5MW0014, 41312419, 41312663, 41312747. Casting number 37712390. (Item #: 112269, Ref: 3641887M91) $133.00

Water Pump Gasket - This Gasket is for 3641250M91 and other water pump backplates. Fits models 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Item #: 163938, Ref: 4224387M1) $2.10

Water Pump Gasket - Backplate to Block - For Massey Ferguson tractor models 698, 1080, 1085, Replaces Massey Ferguson OEM number 736707M1, For Water Pump use Item #: 161197, (Item #: 161198) $22.10

Water Pump Gasket - Pump to Backplate - For Massey Ferguson tractor models 698, 1080, 1085, Replaces Massey Ferguson OEM number 736685M1, For Blackplate to Block Gasket use Item #: 112269, (Item #: 161197) $12.50

Water Pump, Remanufactured, 37712390 - For Massey Ferguson tractor models 698, 1080, 1085, Replaces Massey Ferguson Casting number 37712390, 37712391, Shaft Size: 15/16", Includes mounting gasket, Includes thermostat gasket, (Item #: 206944) $184.01

Water Pump Repair Kit - This Water Pump Repair Kit is used to repair 3641363M91 and 3641887M91 Water Pumps. It is used on Perkins A4.318 A4.318.2 Engines, Perkins Build List: NC21725, 22089, 22699, 22755, 31080, 31118, 31120. It replaces U7LW0055, U7LW0156, 86948, 3637446M91, 3641385M91, 4224111M91, 739254M91, U7LW0055. (Item #: 173316, Ref: 3637446M91) $126.00

Water Pump with Pulley - For Massey Ferguson tractor models 365, 375, 390, 390T, 398, 698, 3050, 3060, 3065, 3070, 4225, 4235, 4240, 4245, 4255, 4265, 6120, 6130, 6140, 6150 Replaces Massey Ferguson OEM number 4222002M91, , Compatible with Perkins Engine (s) A4.236, A4.236T, A4.248, 1004-4T, Replaces Perkins OEM number U5MW0108, Water Pump with Pulley, (Item #: 170663) $73.00

Decals and Emblems

No
Picture
Decal Set - For 698 4WD. Decal Set - HOOD ONLY. (Item #: 183524, Ref: R1492) $77.00

Hood Emblem - For 20D, 20E, 20F, 240, 250, 270, 275, 283, 283 UK, 290, 290 UK, 298, 30E, 30H, 40E, 50E, 50F, 50H, 670, 690, 698, 699. Hood Emblem. (Item #: 104146, Ref: 1682944M1) $7.00

Drive Train

Massey Ferguson 698 12 Speed Synchromesh Transmission Parts

12 Speed Synchromesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 698 8 Speed and Multi-Power Selector Parts (NON Synchromesh)

8 Speed and Multi-Power Selector Parts (NON Synchromesh) - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 698 8 Speed Synchromesh Selector Parts

8 Speed Synchromesh Selector Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $23.80

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial nubmer up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $45.80

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $11.80

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Cross - sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $40.42

Differential Gear - The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $71.00

Differential Input Shaft - Used on Massey Ferguson models: 1080, 148, 152, 168, 265, 275, 290, 298, 375, 375E Brazilian, 390, 390E Brazilian, 390T, 398, 399, 50D, 50F, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. this shaft is 14 5/8 inches long, and as 10 splines on one side and 22 on the other. Includes needle bearing (Item #: 182618, Ref: 1866533M1) $227.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $68.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $25.50

Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.40

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $13.10

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $9.90

Differential Plate, Left Hand - Replacing Massey Ferguson part numbers 1860885M1, 1687864M3, 1687864M1, 1860865M1, this plate is used on the left side of the differential. Used on Massey Ferguson models: 1080, 1085, 165, 168, 185, 188, 245, 255, 265, 270, 275, 282, 285 (FR), 290, 290 Brazilian, 298, 30B, 30D, 30E, 30H, 375E Brazilian, 390E Brazilian, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 60HX, 670, 675, 690, 698, 699 (Item #: 173284, Ref: 1687864M1) $126.45

Differential Plate, Right Hand - For tractors with Wet Brakes, this differential plate is used on Massey Ferguson models: 4500, 6500, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60HT, 1085, 245, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 50, 670, 690, 698, 699. Uses gasket 183254M1 and O-Ring 1860838M1. Replaces Massey Ferguson part number 1860882M1 (Item #: 173173, Ref: 1860882M1) $146.01

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.30

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $1.98

Gear Shift Boot - Inside diameter top = 5/8 inch, inside diameter bottom = 1-11/16 inch, height 4-3/8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8/1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4. (Item #: 151854, Ref: 1694127M1) $6.10

No
Picture
Gear Shift Knob - For Massey Ferguson tractor models 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1682623M1, 4 Speed, (Item #: 173635) $7.40

Gear Shift Knob, 6 Speed - 3/8" UNF, engraved R-2-1-3. For tractor models 135, 135UK, 150, 165, 165UK, 175, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 670, 690, 698, 699, Ind. 20, 20C, 30, 31. (Item #: 151022, Ref: 1862401M1) $8.30

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $26.40

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.28

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $55.00

Input Housing Gasket - This Gasket replaces part numbers: 188807M2, 512787M2 (Item #: 167235, Ref: 512787M2) $1.90

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $12.40

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $11.00

Multi Power Input Housing - This Multi Power Input Housing is used on 135, 150, 165, 175, 180, 1080, 1085, 235, 245, 255, 265, 270, 275, 285, 290, 298, 298, 670, 690, 698, 30, 65, 35, 50. Replaces 1860889M1 (Item #: 110786, Ref: 1860889M1) $167.00

Oil Seal, Axle - Outer oil seal in rear axle housing, for tractors with wet brakes. For models: MF255, MF265 except Orchard, MF275, MF285. MF298, MF398, MF399, MF690 to serial number T1301043, MF698, MF699, MF1085 Industrials: 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D. 2 3/8 inches inside diameter, 3 3/8 inches outside diameter, 7/8 inch width. Replaces 1860954M1 (Item #: 151020, Ref: 1860954M1) $11.50

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.40

Pinion Bearing - Measuring 30mm inside diameter, 62mm outside diameter, and 24mm wide, this bearing replaces Massey Ferguson part numbers 834733M1, 834733V1. Used on Massey Ferguson models: 1004, 1004T, 1080, 1085, 1200, 1250, 275, 283, 283 Brazilian, 285 (FR), 285 US Built, 290, 290 US Built, 298, 30H, 375, 375E Brazilian, 390, 390E Brazilian, 390T, 398, 399, 415 Brazilian, 4245, 425 Brazilian, 4255, 4260, 4270, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 465 Brazilian, 475 Brazilian, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 575, 590, 592, 595, 650 Brazilian, 660 Brazilian, 675, 690, 698, 698T, 699. (Item #: 180084, Ref: 834733M1) $73.00

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $12.70

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.50

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.70

Pump to IPTO Clutch Shaft - Used on tractors with Independent PTO, this part replaces Massey Ferguson part number 1868539M1. Used on 1200, 1250, 148, 152, 158, 168, 188, 20E, 240, 250, 253, 265, 275, 285, 290, 298, 375E Brazilian, 390E Brazilian, 40E, 50E, 50EX, 50H, 50HX, 550, 565, 575, 590, 60H, 60HX, 698, 699. (Item #: 182625, Ref: 1868539M1) $112.00

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.30

Reverse Idler Gear - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1688127M1, 14/21 Teeth, (Item #: 165953) $13.98

No
Picture
Seal - Front Axle Hub Seal. For tractors: MF250 with 6.00 x 10 rim, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 20D with fixed axle, 30E, 40E. (Item #: 173176, Ref: 897702M1) $7.50

Sealing Ring - This sealing ring is 1-1/2 inch outside diameter and 3/32 inches wide. Two used per input shaft. Replaces Massey Ferguson part number 186581M1. (Item #: 165436) $6.40

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.50

No
Picture
Seal, Rear Wheel Axle Shaft, Outer - 4.00 inch x 2.875 inch x .375 inch. For tractor models 165, 168, 175, 178, 185, 188, 250, 265, 275, 290, 565, 575, 590, 595, 675, 690, 698. (Item #: 172312, Ref: 894763M1) $17.40

Shift Fork, 8 Speed - For tractor models 1080, 1085, 11, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Transmission Countershaft - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1677827M3, Fits tractors with 12 speed Synchromesh Transmission, (Item #: 165943) $78.98

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.30

Electrical System

Alternator - 12 volt, 34 amp. For tractor models (240 1983 to 1999 with 152 diesel), (243 1999 to 2000), (250 1983 to 1986 with 152 diesel), (253 1988 to 1999 with 152 diesel), (254 1982 to 1987 with 152 diesel), (163T 1993 and on), (270 1983 to 1986 with 236 diesel), (290 1983 to 1986 with 248 diesel), (670 1983 to 1986 with 236 diesel), (690 1983 to 1986 with 248 diesel), (698, 698T 1983 to 1986 with 318 diesel). Replaces 24087. (Item #: 111064, Ref: ALU0023) $117.00

Oil Press Switch - Oil Pressure Switch. For tractors: MF154S, MF174S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF270, MF274-4, MF282, MF283 except Brazil, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF3050 to serial number V173002, MF 3060 to serial number V173002, MF 3070 to serial number V173002, MF 3090 to serial number V173002, MF3505, MF3525, MF3545, MF3630, MF3650 Industrials: 20D, 30E, 40E, 50E. Replaces 1423895M91, 1877721M92. For 750, 760, 850, 860. (Item #: 151010, Ref: 3599307M91) $9.00

Starter - New Lucas style starter assembly with solenoid. For tractors: MF174-4S, MF184-4, MF194-4F, MF270, MF274-4, 282, 283 except Brazil, MF290, MF292-4, MF298, MF362, MF375, MF383, MF390, MF390T, MF393, MF398, MF399, MF670, MF690, MF698, MF699, MF3050, MF3060. Replaces Lucas LRS232, LRS215, 26404R, 27464, 27539R, NSB529, 26271R, 26413R, 26410, 27539, NSB540, LRS00232, LRS519, 26404, 26413, 26271, 27572, 27572B, S5027, NSB531. Replaces Massey Ferguson 1868285R3, 1868285M3, 1868285M91, 1860093M2, 1691806R1, 1691806M1, 1447731M1, 3597372M1, 3597372M2, 3597372R2, 3763362M92, 3930509R1, 3930506E1, 3930506E1ATG, 3930506R1, 4226701M91, 4224340M91, 3519400M92, 1680064M1, 3763362M91, 1868287T, 1868285M2, 2873B057, 2873B072 (Item #: 112303, Ref: 3763362M91) $178.00

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (506 from 1971 up), (520, 525 1971-79), (620, 625 1971-72), (168 1971-72 with 236 dsl), (175S, 185 1970-72), (178 1970-72 with 248 dsl), (188 1972-74 with 248 dsl), (240 1983-99 with 152 dsl), (250 1983-86 with 152 dsl), (261 1992-98), (271, 281 1998-00 with 1004.4 dsl), (270 1983-86 with 236 dsl), (283 1983-99 with 248 dsl), (290 1983-86 with 318 dsl), (298 1983-86 with 318 dsl), (365 1990-96), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (396 1992-98 with 1006.6 dsl), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (670 1983-86 with 236 dsl), (690 1983-86 with 248 dsl), (698, 698T 1983-86 with 318 dsl), (699 1984-86 with 354 dsl), (3050 1987-89 with 236 dsl), (3060 1987-93 with 248 dsl), (3070 1987-93 with 236 dsl), (3610, 3630 1987-90 with 354 dsl). Replaces 26410, 26274, 26366, 27539. Verify numbers on starter before ordering. (Item #: 112303, Ref: SLU0005) $178.00

Starter, LH Mount - Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $178.00

Starter, Temperate Climate - Lucas Type for Perkins A4.212, A4.236 and A4.248 Diesel Engines. For MF 165, 175, 185, 265, 275, 290, 298, 362, 365, 375, 390, 390T, 396, 398, 399, 675, 690, 698, 699, 3050, 3060, 3065, 3070, 3075, Ind. 50, 50D, 50E, 50F, 60H. Replaces 1860093M2, 1680064M1. (Item #: 112303, Ref: S.41143) $178.00

Switch - Switch, neutral safety, has blade type terminals. For tractors: MF25, MF130, MF231, MF240*, MF250*, MF270, MF290, MF298*, MF670, MF690, MF698, MF3505, MF3525, MF3545 industrials: 20D, 30E, 40E*. *Optional with 1679223M2. Also used for differential lock s (Item #: 164579, Ref: 3381094M1) $26.50

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $12.00

Engine Bearings

No
Picture
IPTO Clutch Kit - For Massey Ferguson tractor models 255 (dual speed), 265 (dual speed), 270, 275 (dual speed), 290, 298, 360, 375, 390, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 30E, 40E, 50E, Replaces Massey Ferguson OEM number 1672626M1, 1870859M1, 514551M1, 1870858M1, 1870860M1, Kit Includes: (7) Frictions Discs, (7) Separator Plates, (2) Piston Rings, and (2) Sealing Rings, (Item #: 177048) $352.00

No
Picture
Main Bearing Set, 4.236 Diesel, .010 - .010 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Item #: 107182, Ref: 81558A) $24.40

No
Picture
Main Bearing Set, 4.236 Diesel, .020 - .020 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Item #: 107183, Ref: 81558B) $25.60

No
Picture
Main Bearing Set, 4.236 Diesel, .030 - .030 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Item #: 107184, Ref: 81558C) $9.98

No
Picture
Main Bearing Set, 4.236 Diesel, Std. - Standard Main Bearing Kit. For 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Item #: 107181, Ref: 81558) $20.70

No
Picture
Main Bearings - Standard - Set - For Massey Ferguson tractor models Super 90, 70, 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 410, 540, Compatible with Massey Ferguson Construction and industrial models 320, Replaces Massey Ferguson OEM number 745584M91, (Item #: 166095) $39.20

PTO Housing Retainer - For Massey Ferguson tractor models 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 393, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 532880M1, Use with PTO seal 834216M1, Rear PTO Housing Retainer, For PTO seal use Item #: 107013, (Item #: 151852) $46.60

No
Picture
PTO Hydraulic Clutch Seal, Inner - For Massey Ferguson tractor models 135 (UK), 165 (UK), 240, 253, 263, 265 (s/n 9A349239-later), 270, 275 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 1870858M1, Replaces manufacturer number VPH5201, O.D.: 2.441", Width: .151", (Item #: 173691) $4.98

Ring Gear Washer - For Massey Ferguson tractor models 50, 175, 180, 255, 265, 270, 275, 282, 283, 285, 290, 298, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 699, 1085, Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500, Replaces Massey Ferguson OEM number 1866545M1, 1866545M2, 4-1/4" I.D x 1/16", (Item #: 159126) $3.98

No
Picture
Rod Bearing Set, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106999, Ref: 85036C) $10.20

No
Picture
Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106997, Ref: 85036A) $10.10

No
Picture
Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106998, Ref: 85036B) $10.60

No
Picture
Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106996, Ref: 85036) $11.20

Sealing Ring - For Massey Ferguson tractor models 20, 30, 31, 35, 35X, 135, 148, 150, 165, 175, 178, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 298, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 420, 440, 492, 550, 565, 575, 590, 595, 670, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3699909M1, 907315M2, 3609471M1, 3699909V1, 186198M1, 2" O.D. x 3/32", (Item #: 165441) $1.98

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $7.00

Thrust Washers - Set of 4 Halves - FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and 6.354 Perkins Diesel Engine. Set of 4 halves, makes 2 complete thrust washers. (Item #: 107188, Ref: 31137551) $6.80

Engine Gaskets

Gasket Set, Top - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107250, Ref: 748008M91) $35.00

Head Gasket Set - For Massey Ferguson tractor models 390, 390T, 393, 398, 698, 3070, Engine: Perkins T4.236 Diesel, Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 107264) $109.00

Oil Pan Gasket - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 70 Replaces Massey Ferguson OEM number 737957M1, , Compatible with Perkins Engine (s) A4.318 (diesel), Replaces Perkins OEM number 36866732, Oil Pan Gasket Only, (Item #: 107289) $24.60

Seal, Front - FOR AD3.152 Perkins Diesel. Replaces: VPC5102, VPC5103, 02100004, 1446853M1, 1447690M1, 2413F436, 2415361, 7701031630, 810742, 812280. (Item #: 107222, Ref: 2418F436) $9.10

Seal, Rear Main - FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch.303158411 (Item #: 107230, Ref: 1447049M91) $19.90

Valve Cover Gasket - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70, Replaces Massey Ferguson OEM number 746036M1, Replaces Perkins manufacturer number 3681A008, Perkins 318 Diesel Valve Cover Gasket, (Item #: 158294) $15.40

Valve Seals - Valve seals for AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 1447019M1, 33817125, 33817402, 3637041M1, 733820M1, 736840M1, 740009M1. (Item #: 128624, Ref: 33817117) $0.80

Engine Rebuild Kits

Cylinder Kit - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70, Replaces Massey Ferguson OEM number U5MK4318, (Item #: 167496) $107.00

No
Picture
Engine Rebuild Kit - Less Bearings, Perkins, A4.236T - For Massey Ferguson tractor models 390T, 393, 398, 698, 3065, 3070, Compatible with Perkins Engine (s) A4.236T (turbo diesel, s/n U083371N-later), Bore: 3.877", 3 ring piston, 1.5" piston pin, 30 degree intake valve, Flanged liners without fire dam, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For thrust washer set use Item #: 107194, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130853) $581.00

Engine Rebuild Kit with Valve Train - Less Bearings, Perkins, A4.236T - For Massey Ferguson tractor models 390T, 393, 398, 698, 3065, 3070, Compatible with Perkins Engine (s) A4.236T (turbo diesel, s/n U083371N-later), Bore: 3.877", 3 ring piston, 1.5" piston pin, Flanged liners, 30 degree intake valve, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For thrust washer set use Item #: 107194, (Item #: 130873) $665.00

Engine Rebuild Kit with Valve Train - Less Bearings, Perkins, A4.318 - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Perkins Engine (s) A4.318 (diesel), Bore: 4.500", Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For thrust washer set use Item #: 107184, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130872) $776.00

Engine Parts

Bolts, Conn Rod - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 160206, Ref: 32762144) $3.20

Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. Replaces 740407M1, 740407V1, 731087M1, 0050119, 31134151, 00505353, 81803978, 31134151 80505353, 296149A1, 957E6207 (Item #: 128688, Ref: 957E6207A) $2.70

Crank Gear - 28 teeth. Do NOT use on build number: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins Engines. Replaces 734749M1, 73479M1, 734749M1. (Item #: 165548, Ref: 31171681) $74.00

No
Picture
Crankshaft Kit - This Crankshaft Kit is used on Perkins A4.236 and A4.248 engines with lip rear crankshaft seal 1447049M91 (not included). It contains crankshaft, 735168M91 main bearing set, 736950M91 rod bearings, 733714M1 thrust washers, 3638115M1-thrust block (this three bolt pulley retainer replaces older single bolt style), 3638113M1 bolts. This Crankshaft does not have balancer weights in Web of Shaft. Replaces 31315981, 31315985, 3637401M91, 94433, 94435, 94436, U5BG0019, U5BG0024, U5BG0052, ZZ90081 (Item #: 3637401M91KIT) $558.83

Crankshaft Pulley Retaining Kit - This Crankshaft Pulley Retaining kit is used on 1004.4, 1004.4T, 1004.4TI, 4.41, A4.236 and A4.248 Perkins Engines with 3 bolt crankshafts. Also used with changing from an older style single bolt retainer crank to a three bolt. Includes 3638115M1 Thrust Block, 3638113M1 Bolts. Replaces 3638113M1, 3638115M1, 3271R021, 32186139, 3242T001, 132186139, 3242T001 (Item #: 182751, Ref: 3638115M1) $64.00

Cylinder Head Nut - This nut is used with 746215M1 Cylinder Head studs. Replaces 02100650, 1476232, 1476232X1, 33531128, 376672, 376672X1 (Item #: 173309, Ref: VPA3901) $13.50

Cylinder Head Stud - Cylinder Head Stud. Fits Massey Ferguson Industrial: 70 (engine serial number <318UA15224 and engine serial number 318UA). Tractors: SUPER 90, 298, 698, 1080, 1085, 285, 595. Combine 540. 1/2 inch NF X 4 25/32 inch. Replaces 732911M1, 32526307, 32526326. (Item #: 172375, Ref: 746215M1) $9.30

No
Picture
Freeze Plug - Verify OEM part number of 159312A, 7208009, 731356V1. For tractor models 300, 410, 510, 540, 550, 750, 760, 850, 860, 2500, 4500, 20, 200, 2135, 2200, 30, 302, 304, 3165, 40, 50, 70, 80, 1130, 1135, 135, 150, 154-4, 165, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 263, 2640, 2675, 285, 298, 3090, 35, 35X, 3505, 3525, 3545, 3630, 364S, 3650, 399, MH50, 65, 698, 699. (Item #: 172875, Ref: 731356M1) $1.30

Multipower Transmission Clutch Kit - For Massey Ferguson tractor models 30, 35, 50, 65, 135 (UK), 150, 165 (UK), 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 1672626M1, 185425M1, 185464M1, 186519M1, 186580M1, (Item #: 168778) $242.00

Planetary Shifter Coupler - For Massey Ferguson tractor models 30, 40, 50A, 60, 148, 158, 165, 168, 185, 188, 235, 245, 250, 255, 261, 265S, 270, 283, 285, 290, 342, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 550, 565, 590, 595, 650, 670, 675, 690, 698, 699, 1080, 1085, 1200, 1250, 4215, 4220, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500, Replaces Massey Ferguson OEM number 1866557M2, 1866557M1, Teeth: 28 and 22, (Item #: 151825) $26.98

Ring Gear, Flywheel - This ring gear has 122 teeth and measures 14.312 inch inside diameter. For tractor models Super 90, 1080, 1085, 1100, 1105, 1130, 1135, 285, 298, 698. (Item #: 128505, Ref: 731988M1) $69.00

Rocker Arm (LH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 747690M1, 3737A101, 3737A031, 3737A071, 3638185M1, 0520429, 957E6469 (Item #: 173476, Ref: 41151483) $19.00

Rocker Arm (RH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces original part numbers 3638184M1, 747691M1, 957E6468, 3737A041, 3737A081, 3737A091, 520430, 72080122. (Item #: 173477, Ref: 41151484) $19.70

No
Picture
Valve, Exhaust - For tractor models (3370, 3065, 698 with T4.236 Diesel and engine serial number U106655N and up), (1130 with T6.354, T6.354.1 or TC6.354.1 diesel engines), (750, 1105, 1135 with T6.354.1 or TC6.354.1 diesel engine), (760 with T6.354.1 or TC6.354.1 diesel and engine serial number UA48970L and up), (274 with 4.236 diesel engine), (1100 with 6.354 Perkins Diesel Engine). (Item #: 167089, Ref: 3142A052) $12.70

No
Picture
Valve Guide, Exhaust - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 166888, Ref: 3343J002) $3.98

No
Picture
Valve Guide, Intake - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price shown is for each, sold only in multiples of 2 items. (Item #: 166582, Ref: 3343F002) $1.98

No
Picture
Valve, Intake - For tractor models (3370, 3065, 698 with T4.236 Diesel and engine serial number U106655N and up), (1130 with T6.354, T6.354.1 or TC6.354.1 diesel engines), (750, 1105, 1135 with T6.354.1 or TC6.354.1 diesel engine), (760 with T6.354.1 or TC6.354.1 diesel and engine serial number UA48970L and up), (274 with 4.236 diesel engine), (1100 with 6.354 Perkins Diesel Engine). (Item #: 166896, Ref: 31431315) $8.40

Valve Train Kit - For Massey Ferguson tractor models 390T, 393, 398, 698, 3070, Compatible with Perkins Engine (s) A4.236T, Kit includes: Intake and exhaust valves, guides, springs and keepers, (Item #: 120336) $139.00

Engine Pistons and Sleeves

No
Picture
Piston - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price is per piston. (Item #: 168957, Ref: 68332) $37.30

No
Picture
Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 167206, Ref: U5MK0034) $69.00

No
Picture
Sleeve, Perkins 152 Diesel - For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Item #: 128601, Ref: 739043M1) $23.10

Engine Rings

Piston - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70, Replaces Massey Ferguson OEM number 738106M91, (Item #: 167154) $97.00

No
Picture
Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 120667, Ref: 836325M91) $12.30

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70 Replaces Massey Ferguson OEM number 746163M91, 41158118, 41158132, , Compatible with Perkins Engine (s) A4.318 (diesel), Bore: 4.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 121005, (Item #: 174363) $119.00

Piston Ring Set - Standard - Single Cylinder - For Massey Ferguson tractor models 390T, 393, 398, 698, 2705, 3065, 3070, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Combine (s) 750, 760, 850, 860, Compatible with Perkins Engine (s) A4.236T, C4.236, T6354.4, Compatible with White tractor models 2-105, 2-110, Compatible with White Combine (s) 8900, Replaces OEM number 41158005, Bore: 3.877", Ring Size: Standard, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, (Item #: 121004) $27.70

Piston Ring Set - Standard - Single Cylinder - For Massey Ferguson tractor models 285, 298, 698, 1080, 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70 Replaces Massey Ferguson OEM number 746163M91, 41158118, 41158132, , Compatible with Perkins Engine (s) A4.318 (diesel), Bore: 4.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold per cylinder, Piston Ring Set - Standard - 4 Cylinder use Item #: 174363, (Item #: 121005) $32.20

Exhaust System

No
Picture
Muffler - For model 698. (Item #: 171534, Ref: 1680589M1) $165.00

Muffler, Vertical - Used on Massey Ferguson equipment with Perkins A4.318 engines, this muffler has a 2 15/16 inch inlet inside diameter and is 46 inches over all. Black heat resistant paint finish. Used on Massey 298, 698, 50H, 50X, 60H. Replaces part numbers 1693294M1, 1690944M2, 1690589M1. (Item #: 171534, Ref: 1690589M1) $165.00

Fuel System / Air Intake

Air Cleaner Hose - Complete with Spring inside, like the original. This hose has a 2-3/16 inch inside diameter. Perkins A4-302, A4.236 and A4.248 ALL with dry air cleaner. Used on Massey Ferguson 50, 165 UK, 265, 275, 285, 290, 298, 362, 365, 375, 390T, 398, 698 (Item #: 183808, Ref: 883686M1) $27.30

$Massey Ferguson 698 Cable - Fuel Stop \ Shutoff, 1670157M1$
Cable - Fuel Stop / Shutoff, 1670157M1 - For Massey Ferguson tractor models 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1670157M1, Length: 44-3/4", (Item #: 161939) $25.30

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.00

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.10

Fuel Filter, CAV type - Fuel filter for tractor models 290UK, 298, 30, 3090, 3095, 3120, 3125, 3140, 35, 3545, 360, 362, 364, 3645, 3655, 3660, 374, 384, 394, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, MH50, 6170, 6180, 6235, 6245, 6255, 6265, 6270, 6280, 6290, 65, 698, 699, 8120, 8210. Replaces 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $8.20

Fuel Lift Pump - Fuel pump for AD4-203 and A4-318 Diesel Engines, two-hole mounting. For tractors: MF165 engine serial number 29F4249 and up MF255, MF285, MF298, MF698, MF1080, MF1085 Industrials: 30, 40B, 50, 50A, 302 and 304, engine serial number 29F4249 and up, 3165 engine serial number 29F4249 and up Combine: 540. Replaces 26471328, 2641333, 2641336, 886100M91, 14466155M91, 1447693M91, 2641328, 2641333, 2641336, 32556, 35218, ULPK0010. (Item #: 117601, Ref: 3637286M91) $20.50

Fuel Sending Unit - For Massey Ferguson tractor models 675, 690, 698, 699, Replaces Massey Ferguson OEM number 1678518M2, (Item #: 119752) $39.10

Fuel Tank Cap - For Massey Ferguson tractor models 20, 35, 35X, 40, 65, 135, 165, 175, 178, 231, 240, 240P, 250, 253, 261, 263, 270, 275, 283, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20B, 20C, 20D, 20E, 20F, 25, 30B, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 50HX, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 1698042M91, 1666439M91, 1876534M91, 828583M91, For gold color cap use Item #: 153639, (Item #: 113555) $13.30

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. Replaces 2666103, 893501M91, 893501M1, 893501V91 (Item #: 129233, Ref: 893501M1) $14.70

Injection Line - #1 Cylinder - For Massey Ferguson tractor models 285, 298, 698, 1080 (engine s/n 318UA3659-later), 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70 (engine s/n 318UA3659-later), 320, Replaces Massey Ferguson OEM number 738913M91, 35355413, Tubing with fittings, For Cylinder #2 use Item #: 162768, (Item #: 162769) $14.98

Injection Line - #2 Cylinder - For Massey Ferguson tractor models 285, 298, 698, 1080 (engine s/n 318UA3659-later), 1085, Compatible with Massey Ferguson Combine (s) 540, Compatible with Massey Ferguson Construction and industrial models 70 (engine s/n 318UA3659-later), 320, Replaces Massey Ferguson OEM number 738912M91, 35355414, Tubing with fittings, For Cylinder #1 use Item #: 162769, (Item #: 162768) $14.98

Injection Pump - For tractor models MF285, MF298, MF698, MF1080, MF1085. Replaces 1446202M91 144182M1, 1446202M1, 1446846M1, 1447178M1, 144605M1, CAV3342F410, CAV3342F411, CAV3249F240, CAV3343F010, DPA3249F243 (Item #: 117638, Ref: 1447605M1) $779.00

Injector Nozzle - For tractor models 285, 298, 698, 1085, (70 serial number 318UA10691 and up). Replaces 5621526, 5621646, 26461303, BDLL150S6486, 2646681, 12646824, BDLL150S6599, 2646824, 1446892M1 (Item #: 179940, Ref: 1446892M1) $48.90

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 893501M91, 1446935M1, 2666108, 3583453M2, 3583543M2, 3583543V2, 1854125 (Item #: 118792, Ref: 3583543M2) $11.50

Shut Off Cable - This Shut Off Cable is 41.5 inches long. It is used as original equipment on Massey Ferguson 1004, 230, 235, 240, 253, 263, 350, 355, 360, 4225, 4235, 4245, 4255, 4265, 698, 699. Also can be used as a universal part is a 41.5 Inch cable is needed. Replaces original part numbers 1670157M1, 3701712M91, 3597064M92, 3597064M91 (Item #: 121222, Ref: 3597064M92) $31.40

No
Picture
Throttle Control Spring - For Massey Ferguson tractor models 240, 250, 253, 263, 283 (Brazil), 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 399, 670, 690, 698, 699, 3050, 3060, 3070, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 20E, Replaces Massey Ferguson OEM number 1660773M2, (Item #: 173632) $4.80

Gauges

Switch, Water Temperature Sending Unit - Sending unit, water temperature. For tractors: MF25, MF130, MF154-4, MF154-S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF254-4, MF270, MF274-4, MF283 except Brazil, MF285 to serial number 9A34239, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF2675, MF2705, MF2745, MF2775, MF2805, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3660 Industrials: 20D, 30E, 40E, 50E. Replaces 1877731M92, 1877731M93, 1877731V92, 531209M1 (Item #: 121163, Ref: 1877731M92) $7.30

Tachometer Cable - For Massey Ferguson tractor models 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3302472M91, Length: 62", Load End:, Drive End:, (Item #: 121553) $1.98

Tachometer Cable Gearbox - This tachometer gear box has a 1/2 inch UNF cable fitting. For tractor models 1080, 165, 168, 175, 178, 185, 188, 265, 275, 285, 290, 298, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Tachometer Gearbox has a 1/2 inch cable inlet fitting. (Item #: 121518, Ref: 1446059M1) $32.80

Tractormeter Drive with Gasket - 1/2 inch diameter. UNF thread. For tractor models 154-4, 165UK, 184-4, 194-4F, (240 with engine CE31244), 165 UK, 253, 254-4, 261, (265 up to serial number 9A349239), 270, 274-4, 282, 283, 283 UK, 290, 294-4, 298, 362, 375, 383, 390, 390T, 398, 670, 690, 698, 699, 50E, 50F, 50H, 60H. Replaces 2758346. (Item #: 121518, Ref: 1853144M1) $32.80

Hitch / Drawbar

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

No
Picture
Heavy Duty Leveling Box Knuckle - For Massey Ferguson tractor models 65, 165 (UK), 175 (UK), 175, 180, 185, 235 (UK), 240, 245, 250, 255, 265, 270 (UK), 271, 275 (UK), 275, 281, 283 (UK), 283, 285, 290 (UK), 298 (UK), 350 (UK), 360, 362, 375, 383 (UK), 383, 390, 390T, 393, 398, 399, 461, 543, 670, 690, 698, 699, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 897653M2, 893560M1, 897653M1, 897653V2, (Item #: 176231) $14.80

No
Picture
Hydraulic Lift Shaft Bushing - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 680, 698, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40E, 50C, 50D, 50E, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1870934M1, Dimensions: 2-3/16" x 2-3/8" x 2-55/64", With oil spot, (Item #: 173699) $12.70

No
Picture
Leveling Yoke Rod - For Massey Ferguson tractor models 390T, 398, 399, 698 (T), 699, Replaces Massey Ferguson OEM number 1686743M91, Hole Size: 3/4", I.D.:2-1/16", O.D.: 2-15/16, Overall Length: 10-3/4", (Item #: 173639) $40.40

Lift Arm End, Left Hand - Used on Massey Ferguson 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1505, 1805, 285, 298, 396, 398, 399, 698, 699, this is a Category 3 lift arm end. Category 2 bushing is included. Replaces 503920M91 (Item #: 187335, Ref: 503920M91) $56.00

Lift Arm End, Right Hand - Used on Massey Ferguson 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1505, 1805, 285, 298, 396, 398, 399, 698, 699, this is a Category 3 lift arm end. Category 2 bushing is included. Replaces 503919M91 (Item #: 187336, Ref: 503919M91) $56.08

No
Picture
Lift Link Rockshaft Pin - For Massey Ferguson tractor models 65, 175, 180, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 390, 390T, 398, 399, 451, 461, 471, 481, 491, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1694025M1, 893568M1, (Item #: 174744) $5.00

No
Picture
Lift Link Yoke Clevis Pin - For Massey Ferguson tractor models 65, 135, 165, 168, 175, 178, 180, 185, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 394, 399, 451, 461, 471, 481, 491, 492, 543, 575, 583, 590, 596, 670, 675, 690, 698, 699, 1080, 1085, 3050, 3060, 3070, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 20F, 30, 30E (UK), 31, 40, 40B, 40E, 40E (UK), 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 3582662M1, 893567M1, Fits Massey Ferguson tractor models 299, 765, (Item #: 174723) $8.90

No
Picture
Lower Lift Arm - Left Hand - For Massey Ferguson tractor models 275, 285, 290, 298, 375, 383, 390, 390T, 392S, 393, 398, 590, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 1660263M93, 1660263V93, Cat II, For Lift Arm, Lower, Right Hand use Item #: 173850, (Item #: 173629) $123.00

No
Picture
Lower Lift Arm - Right Hand - For Massey Ferguson tractor models 275, 285, 290, 298, 375, 383, 390, 390T, 392S, 393, 398, 590, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 1660262M93, Cat II, Length Center Ball to Center Ball: 40", Thickness: 0.750", For Left Hand version use Item #: 173629, (Item #: 173850) $124.00

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.90

Stabilizer Pin - This Pin is used with telescoping stabilizers and with 514992M2 bracket. Uses 186809M1 Nut, sold separately. It replaces original part number 521006M1. Large shoulder 1.10 in. dia x 1.23 in. long, smaller shoulder .862 in. dia x 2.28 in. long. Threads 3/4 - 16 UNF Right Hand Thread (Item #: 170300, Ref: 521006M1) $21.60

Stabilizer Pin Nut - This Stabilizer Pin Nut is used with 521006M1 Pin. It is 3/4 16 UNF Right Hand Thread. It replaces original part number 3609473M1, 186809V1, 186809M91, 186809M1, 767743 (Item #: 116643, Ref: 186809M1) $2.50

Telescoping Stabilizer - For tractor models 250, 251, 253, 255, 261, 265, 270, 275, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 1085. Stabilizer, telescoping arm. Adjustable from 26 to 35 inches. (Item #: 170264, Ref: 539881M2TSK) $65.00

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $5.80

Hydraulic System

Auxiliary Hydraulic Pump - This Auxiliary Hydraulic Pump is for models: 135 UK, 165, 165 UK, 175, 178, 180, 1080, 1085, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 298, 670, 690, 698, 699. Replaces OEM Numbers 1663627M92, 1686765M1, 1686765M91, 1686766M91, 1869458M92, 526099M93, 531604M92, 5316073M92, 531607M92, 531607M93, 886367M95, 886367M96, 531607M91. (Item #: 112404, Ref: 1663627M92) $300.00

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.80

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $21.30

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $13.50

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.40

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $6.10

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $4.60

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $10.70

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle serial number FE101> without pressure control), (30B, 40 all axle serial number FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Item #: 113740, Ref: 1683301M92) $465.00

Hydraulic Lift Pump - For MF 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 290, 298, 670, 690, 698, 699, Ind 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C. Replaces Hydraulic Pump that has a Pressure Control Valve. Pressure control valve does not come with pump. Also note that your old valve may not fit this pump as there were more than one size. Uses valve number 1681789M91. Also replaces 1675125M92, 1675126M92, 1868439M98. (60468S) (Item #: 113740, Ref: 1672251M92) $465.00

Hydraulic Lift Pump Rebuild Kit - Repairs OEM pump. Replaces OEM Kit number 1810860M91. Chamber has 4 holes. Bottom hole = 1/2 inch. For tractor models 135, 165, 230, 235, 240, 245, 250, 255, 265, 275, 285, 290, 298, 350, 390, 398, 399, 675, 690, 698, 698T, 699, 1080, 1085. (Item #: 173258, Ref: 556603) $193.00

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Item #: 173143, Ref: 1665738M91) $58.92

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $6.20

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic pump o-ring and gasket kit - For tractor models 595 with MK2 pump, (240, 250, 265, 275, 290, 550, 565, 575, 590, 675, 690, 698 all with MK2 pumps). (Item #: 165750, Ref: 1810680M1) $14.10

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $17.22

No
Picture
Hydraulic Pump Rebuild Kit - For Massey Ferguson tractor models 30, 135, 148, 150, 165, 168, 175, 178 (UK), 180, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 690, 698, 699, 1080, All late production, Piston Bore: 0.985", Chamber Ports Measuring: (2) .385", (1) .510", (1) .328", Includes: (2) Valve Chambers, (1) Front Camblock, (1) Rear Camblock, (2) Hydraulic Pistons, (4) Piston Rings + other associated Seals, O-Rings and Gaskets, (Item #: 177040) $228.44

No
Picture
Hydraulic Pump Response Spring - For Massey Ferguson tractor models 178, 230, 231, 235, 240, 240P, 245, 250, 251XE, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 670, 690, 698, 699, 1085, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1868454M2, (Item #: 173689) $1.30

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.60

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.90

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.10

Lift Arm - Hydraulic Ram Lift arm for tractor models MF 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 1080, 1085. (Item #: 151047, Ref: 886404M2) $88.00

$Massey Ferguson 698 Lift Arm, LH\RH$
Lift Arm, LH/RH - Used with 897567M3 Cross Shaft (51 spline). It uses a 7/8 inch pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Item #: 151048, Ref: 1680040M91) $63.00

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $10.30

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $9.80

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Overhaul Kit - Repairs OEM pumps 1868435M3 or 888185M1. For tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 2040, 230, 240, 250, 265, 275, 285, 290, 298, 30, 350, 355, 365, 375, 390, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Hydraulic Pump Overhaul Kit contains (2) A-1868435M2, (2) A-1860038M1, A-180924M2, A180925M2, (4) A-897493M1, A-1810584M2, A-1810680M92. Valve Chambers have 4 holes, 3/8 inch mounting bolt holes with .524 oil hole. (Item #: 173258, Ref: 556603) $193.00

Lift Pump Repair Kit - For 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20E, 230, 240, 250, 253, 265, 275, 285, 290, 298, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 398, 399, 40E, 550, 565, 575, 590, 595, 65, 690, 698, 698T, 699, 765, 965. Hydraulic Lift Pump Repair Kit contains (4) rings, (4) springs, (2) valves, (2) lock rings. (Item #: 173072, Ref: 1810678M91) $26.40

Lift Pump seal kit - For tractor models TO35, 135, 148, 165, 168, 175, 175S, 185, 188, 240, 250, 265, 290, 550, 565, 575, 590, 65, 675, 690, 698, 765, 595 WITH MK2. Replaces 894906M91. (Item #: 184402, Ref: 1810467M91) $5.80

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.10

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Item #: 151049, Ref: 897567M3) $82.00

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $46.24

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.57

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $4.20

Pressure Control Valve - This hydraulic pressure control valve fits the following tractor models: 30, 40, 235, 245, 261, 275, 282, 285 (serial number 9A349239 and below), 298, and 698. It replaces part numbers: 1680061M91, 1869966M94, and VPK1806. (Item #: 167933, Ref: 1680061M91) $145.00

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $84.17

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.90

Lights

Headlight Assembly, RH - Replaces 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with plastic cowl, 148, 155, 158, 165 584071> with plastic cowl, 168, 175 741981>, 178 741981>, 185, 188, 20D, 20E, 230, 240, 250, 254-4 22210641 >, 265, 2675, 2705, 2745, 275, 2775, 2805, 282, 290, 294-4, 298, 50F, 50H, 575, 590, 595 J222029>, 60H, 675, 690, 698, 698T, 699. (Item #: 117736, Ref: 1672768M91) $27.90

Headlight, LH - Replaces 1860176M1, 1890155M1, 1874192M92, 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with PLASTIC COWL, 135 UK MODEL serial number 145381>, 148, 155, 158, 584071> with PLASTIC COWL, 165 UK, 168, 175 741981>, 175 UK, 178 741981>, 178 771981>, 178 UK, 185, 188, 20D, 20E, 230, 240, 250, 254-4, 265, 2675, 270, 2705, 274-4, 2745, 275, 2775, 2805, 282, 285, 290, 294-4, 298, 50F, 50H, 550, 565, 575, 590, 595 J222029>, 60H, 670, 675 J222029>, 690, 698, 698T J222029>, 699. 5 1/2 inches lens outside diameter. (Item #: 117737, Ref: 1672769M91) $31.50

Miscellaneous

Pressure Control Shaft - For Massey Ferguson tractor models 135, 148, 155, 158, 165, 168, 185, 188, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 550, 565, 575, 590, 675, 690, 698 (T), 699, Replaces Massey Ferguson OEM number 1870220M92, 1870220M93, (Item #: 113391) $17.50

No
Picture
Relief Valve - For Massey Ferguson tractor models 20 (E), 30 (E), 165, 175, 180, 235, 240, 245, 250, 251XE, 253, 255, 263, 265, 270, 275, 275 (UK), 283, 283 (UK), 285, 290, 290 (UK), 298, 451, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1633216M91, 1633216M92, For pumps with external relief, (Item #: 177023) $186.00

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

Valve Extension Bracket - For Massey Ferguson tractor models 240, 250, 265, 275, 290, 298, 550, 565, 575, 590, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 1662933M1, (Item #: 167823) $3.98

Oil System

Oil Filler Plug - Rubber measures 1 7/16 inches in diameter. For tractor models with Perkins Engines: 1080, 1085, 135, 150, 165, 175, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 285, 298, 30, 30B, 30D, 31, 3165, 40, 4500, 50, 50A, 50C, 50D, 6500, 698, 70. Replaces 2487863. (Item #: 125397, Ref: 897105M1) $15.20

Oil Pan Drain Plug - This is a 3/4 inch 16 thread Oil Pan Drain Plug. Uses C9NN6734A washer, not included. It replaces original part numbers 376501X1, 735129M91, 748160M1 (Item #: 140610, Ref: C9NN6730B) $3.70

No
Picture
Oil Pan Drain Plug - For Massey Ferguson tractor models 35, 135, 148, 154-4, 165, 168, 175, 178, 184-4, 185, 188, 240, 243, 250, 253 (T3.152.4 engine), 254, 255, 261, 263 (T3.152.4 engine), 274, 285, 290, 360, 362, 363, 365, 375, 383 (A4.248 engine), 390, 390T, 393, 396 (6.60 engine), 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 583, 590, 595, 596, 650, 675, 680, 690, 698, 1080, 1100, 2620 (s/n S271212 -earlier), 2640 (s/n S271212 -earlier), 2645 (s/n S271212 -earlier), 2680 (s/n S271212 -earlier), 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3115, 3120, 3120 (turbo), 3125, 3630, 3645, 3650, 3655, 3660, 4215, 4220, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4315, 4320, 4325, 4345, 4355, 4360, 4365, 4370, 5275, 5285, 5290, 5300, 5320, 5425, 5435, 5445, 5450, 5455, 5460, 5465, 5475, 6140, 6150, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 8110 (T6.60 engine), 8120, 8130 (T6.60 engine), 8210, 8220, Compatible with Massey Ferguson Combine (s) 530, 535, 565, 660, 750, Compatible with Massey Ferguson Construction and industrial models 20D, 40, 50, 50B, 2135, 2200 Replaces Massey Ferguson OEM number 376501X1, 748160M1, , Compatible with Perkins Engine (s) 1006-6T, Replaces Perkins OEM number 2487004, Replaces JCB OEM number 02100072, 02101691, Replaces manufacturer number VPC4400, Fits JCB Dump Truck (s) 712, 716, Fits JCB Wheel Loader (s) 425, Gasket not included, (Item #: 173857) $3.20

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pump - This Oil Pump is for Tractors with 6 Bolt Balancer in Perkins Engines. Replaces original part numbers 4132F041, 3637489M91, 3637489V91, 4132f021, 293177A1 (Item #: 158008, Ref: 4132F041) $35.98

Oil Pump - For tractor models 285, 295, 298, 698, 1080, 1085 and 540 Combines. All with Perkins Gas or Diesel Engines. Oil pump also replaces OEM number 41314113. (Item #: 166608, Ref: 737964M92) $167.00

PTO / Driveline

Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2) $23.30

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $9.30

PTO Brake Pad - Replaces 888739M1, 1662242M2. For tractor models 1080, 135, 148, 155, 158, 165, 168, 185, 188, 240, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 699. (Item #: 105641, Ref: 1662242M2) $38.14

PTO Clutch Spring - Used on tractors with Independent Power Take Off (IPTO) on Massey Ferguson 1004, 1004T, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 185, 188, 20E, 230, 240, 250, 253, 255, 260, 2620, 2640, 265, 2680, 270, 2720, 275, 285 (FR), 290, 290 Brazilian, 290 US Built, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30E, 3115, 3120, 340, 350, 355, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40E, 50E, 50H, 550, 560, 565, 575, 590, 592, 595, 60H, 670, 675, 690, 698, 698699, 698T, 699. Replaces 1660406M1, 3795274M1, 514210M1, 1870857M1 (Item #: 117299, Ref: 1660406M1) $5.98

PTO Disc - 5.039 inch outside diameter, 3.457 inch inside diameter, 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Item #: 114029, Ref: 1672626M1) $12.20

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1) $4.10

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $23.20

No
Picture
Sealing Ring - Sealing Ring, Used on Independent PTO Clutch Packs (2) used. (Item #: 183806, Ref: 541551M1) $7.50

Sheet Metal / Body Parts

Gas Strut Spring Cylinder, Rear Window - For Massey Ferguson tractor models 377 (With SIAC Cab), 387 (With SIAC Cab), 397 (With SIAC Cab), 670 (With 600 Series Cab), 690 (With 600 Series Cab), 698 (With 600 Series Cab), 699 (With 600 Series Cab), 1014 (With SIAC Cab), Replaces Massey Ferguson OEM number 3301920M92, 3301920M1, Rod Diameter: .315", Cylinder Diameter: .709", Overall Length: 20.669", Piston Stroke: 8.268", Ball and socket cylinder and rod ends, (Item #: 113222) $28.98

Gas Strut Spring Cylinder, Roof Hatch - For Massey Ferguson tractor models 20, 30, 240, 250, 275, 290, 342, 350, 360, 362, 365, 372, 375, 377, 382, 387, 390, 397, 398, 399, 670, 675, 690, 698, 699, 1014, 2620, 2625, 2640, 2645, 2680, 2685, 2720, 2725, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4270, 6110, 6120, 6130, 6140, 6150, 6180, 6190, 8110, 8120, 8130, 8140, 8150, 8160, Compatible with Massey Ferguson Construction and industrial models 20E, 30D, Replaces Massey Ferguson OEM number 1897726M91, 3301617M91, 3303021M91, 3303021M92, Rod Diameter: .315", Cylinder Diameter: .709", Piston Length: 2.362", Overall Length: 7.874", Piston Stroke: 2.756", (Item #: 113221) $29.10

Grille, Front - For tractor models 270, 290, 298, 670, 698, 699. (Item #: 104145, Ref: 3701931M91) $49.98

Toolbox - Metal comes primered, COLOR MAY VARY. Restoration Quality. 11 inches X 4 1/2 inches X 4 inches. Fits TRACTORS: TE20, TO20, TO30, TO35, 135, 165UK, 240, 250, 550, 560, 565, 575, 670, 690, 698, 699. Fits INDUSTRIALS: 20E, 20F, 30E, 40E, 50E. Replaces 1662749M91 AND 909616M94. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178901, Ref: 825633M91) $41.00

Tractor Mirror Head, 6.89" x 9.06" - For Massey Ferguson tractor models 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3902430M1, 5126233, Convex Mirror, Fitting: 0.79", Length: 9.06", Width: 6.89", (Item #: 113187) $22.20

Steering

Axle Pin, Front - Hardened, 1-7/8 inch diameter, 11-1/8 inch length, 1/4 inch hole, 1-1/2 inches from threaded end. For tractor models (165 UK with Perkins A4.212, AD4.212), 261, 270, 283, 290, 298, 670, (690, 698, 699 2WD), Industrial 50E. Replaces 898016M3. (Item #: 173186, Ref: 1684285M1) $47.30

Axle Pivot Pin - For tractor models 398, 698, (699 serial number L131027 and up), 3070, 3075, 3090, 3120, (3120 up to serial number C320038), 3140, (3505, 3525, 3545 axle serial number JX4801 and up), 3630, 3650, 3660, 3670, 3680, 3690. (Item #: 173156, Ref: 3426332M1) $60.44

No
Picture
Carrier Hub Pivot Pin O-Ring - For Massey Ferguson tractor models 398, 399, 698 (T), 2620, 2640, 2645, 2680, 2685, 2720, 2725, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3505, 3525, 3545, 3630, 3635, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 6170, 6180, 8110, 8120, 8130, 8140, 8150, 8160, Replaces Massey Ferguson OEM number 371153X1, 3426620M1, 70923647, Replaces manufacturer number VFE1057, Outside Diameter: 2.8", Width: .103", (Item #: 173852) $1.30

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $6.00

Cylinder End - For Massey Ferguson tractor models 298, 698, 699, Replaces Massey Ferguson OEM number 1678024M1, Dimension A: 14.000", Dimension B: 1.100", (Item #: 105190) $94.98

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $190.00

Front Axle Support - For tractor models 168, 175, 178, 185, 188, 270, 298, 392S, 670, 698, 699, (265, 285, 290, 690 all heavy duty), (275, 283 UK models).Replaces 1684290M1, 1684301M91, 1870287M95 (Item #: 160632, Ref: 1684301M91) $521.98

Front Axle Tab Washer - For Massey Ferguson tractor models 165, 250, 253, 255, 270, 282, 283, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 2640, 2675, 2705, 2745, 2775, 2805, 3050, 3060, 3070, 3120, 3140, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 30H, 40E, 50E, 50H, 60, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 881384M1, Inside Diameter: 1.252"', Outside Diameter: 2.004", (Item #: 168997) $2.70

Gear - 3rd Pinion, Countershaft - For Massey Ferguson tractor models 253, 263, 265S (Turkey), 275 (UK), 285S (Turkey), 290 (UK), 360, 362, 365 (s/n B18009-earlier), 375, 390, 390T, 393, 394S (s/n D03066-earlier), 396, 398, 399 (with 1006.6 engine), 399 (with A6-354.4 engine), 670, 690, 698, 699, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Replaces Massey Ferguson OEM number 1617923M3, Tooth: 33, Spline: 17, (Item #: 165913) $110.77

Orbital Steering Unit Seal Kit - For Danfoss Unit. Fits tractor models 1014, 1114 serial number 1110249 - 2422U38048, 1134 serial number 1240062 - 2424U41042, 20F, 265, 275, 285 with Hydro Static Steering, 290 with Hydro Static Steering, 298 with Hydro Static Steering, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095, 30D, 3115, 3120, 3125, 340, 342, 350, 352, 353, 355, 360, 362, 363, 3635, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E Utility and Turf with Manual Shuttle Transmission, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T. (Item #: 165413, Ref: 1810503M92) $27.80

Pinion Gear, Countershaft 2nd - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1687430M1, 20 Teeth, (Item #: 165942) $56.00

Pivot Pin Locking Pin - For Massey Ferguson tractor models 165, 175, 255, 261, 265, 265S, 270, 275, 281, 283, 285, 285S, 290, 298, 365, 375, 383, 390, 390T, 396, 398, 399, 670, 690, 698, 699, 4225, 4235, 4240, 4245, 4255, 4265, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 30, 31, 50E, 3165, Replaces Massey Ferguson OEM number 522259M2, 517107M1, (Item #: 164626) $5.30

No
Picture
Pivot Pin Shim Washer - For Massey Ferguson tractor models 231, 240, 240P, 253, 261, 263, 270, 282, 283, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 396, 398, 399, 670, 690, 698, 699, 4225, 4235, 4240, 4245, 4255, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 50E, 50H, 6500, Replaces Massey Ferguson OEM number 882868M1, Inside Diameter: 1.9", Outside Diameter: 2.643", Width: .035", (Item #: 174614) $4.00

Power Steering Cylinder End - For Massey Ferguson tractor models 154-4, 184-4, 254-4, 274-4, 294-4, 294-4 (s/n 223000321 - later), 670, 680, 690, 698, 2640 (All with 4WD), Compatible with Massey Ferguson Construction and industrial models 24, 25, Replaces Massey Ferguson OEM number 3426660M1, Dimension A: 3.250", Dimension B: M18 x 1.5 RH Thread, (Item #: 105140) $51.00

Power Steering Filter - Oil Filter Element, power steering pumps. For tractor models MF270, MF282, MF283, MF290, MF298, MF375, MF383, MF390, MF670, MF690, MF698. Also for original Plessy pump number 550-1-16688 on tractors: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239 Industrial: 50C. For F40, MF135, MF150, MF35, TO20, TO30, TO35. (Item #: 126052, Ref: 1662566M1) $77.00

Power Steering Pump Seal Kit - For tractor models 165, 168, 185, 188, 265, 270, 275, 282, 283, 290, 298, 362, 375, 383, 390, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 30D, 50, 50E. Replaces part number 1635948M1. (Item #: 170118, Ref: 1635948M92) $18.90

Pump Kit - Seal kit, power steering pumps. For tractors: MF270, MF283, MF298, MF670, MF690, MF698. For pumps 1696666M91 on tractors: MF375, MF383, MF390. For pump 1662243M91 on tractor: MF282. For pump 1666726M92 on tractor: MF290. (Item #: 170118, Ref: 1635948M92) $18.90

Spindle - Left Hand - For Massey Ferguson tractor models 298, 698, 699, Replaces Massey Ferguson OEM number 1675754M91, Dimension A: 13.500", Dimension B: 1.496", Dimension C: 1.796", Dimension D: 1.250", Left Side, (Item #: 105022) $383.00

Spindle - Right Hand - For Massey Ferguson tractor models 298, 698, 699, Replaces Massey Ferguson OEM number 1675753M91, Dimension A: 13.500", Dimension B: 1.496", Dimension C: 1.796", Dimension D: 1.250", Right Side, (Item #: 105021) $362.00

Steering Shaft Bushing - Bushing (metal), for steering shaft, used in front axle support, 2 required. Tractors: MF165 (except LPG), MF175, MF255 (prior to serial number 9A324146), MF265 (prior to serial number 9A324139), MF270, MF275 (prior to serial number 9A324137), MF282, MF283 (except Brazil), 285 (prior to serial number 9A349239) MF290, MF670, MF690, MF699. Industrials: 30, 31, 3165. Also used in power rack, upper bushing only. Tractors: MF180 (serial number 9A48873 and up), MF1080, MF1100, MF1130, MF1150, MF1155. Row Crop and Western Models. Tractors: MF1085, MF1105, MF1135. Replaces 194624M1, 533792M1, 40118, M02-04-03, M02-04-05, 897235M1, 194624M1, 843854M1. I.D.: 1.876 inches, O.D.: 2.0 inches, Length: 1.5 inches. (Item #: 117581, Ref: 897235M1) $7.20

Tie Rod End - For Massey Ferguson tractor models 298, 698, 699 (All 2WD), Replaces Massey Ferguson OEM number 1678023M1, Dimension A: 10.380", Dimension B: .937", 4 Notches, (Item #: 105133) $68.00

Tie Rod Tube - For Massey Ferguson tractor models 298, 698, 699 (All 2WD), Replaces Massey Ferguson OEM number 1675897M2, 7.41" Long", 1.187"O.D., (Item #: 105131) $74.00

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505238M1, 898018M1, 0.28" wide, (Item #: 174120) $2.70

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505240M1, 898019M1, Size: 1-29/32" x 2-5/8", Thickness: 0.034", (Item #: 174124) $2.90

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. For the following models: 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 122, 1250, 130, 133, 135, 140, 145, 148, 1500, 1505, 152, 155, 158, 165, 168, 175, 178, 1800, 1805, 185, 188, 230, 235, 240, 245, 25, 250, 255, 260, 2620, 2625, 2640, 265, 265 S (TR), 2680, 2720, 2725, 275, 285 (FR), 285 S (TR), 290, 298, 35, 35 Gas / 35 Petrol, 35X, 3610, 3630, 3650, 500, 550, 560, 565, 575, 590, 592, 595, 65, 675, 690, 698, 765, 825, 835. Replaces 828217V1, 180876M1, 82817M1, 353615X1, 353427X1, 353 427X1. (Item #: 182520, Ref: S.04352) $3.20

No
Picture
Front Axle Input Reduction Shaft Oil Seal - For Massey Ferguson tractor models 154-4, 184-4, 254-4, 274-4, 294-4, 364S (s/n D03066-earlier), 374S (s/n D03066-earlier), 384S (s/n D03066-earlier), 394S (s/n D03066-earlier), 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 24, 25, Replaces Massey Ferguson OEM number 392107X1, Replaces manufacturer number VPJ2839, Inside Diameter: 1.575", Outside Diameter: 2.165", Width: .276", (Item #: 173874) $5.80

Front Hub - The Front Hub is used on 290, 298, 375, 383, 390, 390T, 398, 399, 670, 690, 698, 699. It Replaces Original Part Number 1625298M2 (Item #: 102496, Ref: 1625298M2) $94.87

Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $142.00

No
Picture
Spin-Out Rim Stop - For Massey Ferguson tractor models Super 90, TO35, 35, 50, 65, 135, 150, 165, 175, 180, 240, 282, 290, 298, 390, 398, 399, 670, 690, 698, 1080, 1100, 1130, 2640, 3050, 3060, 3070, 3090, 3630, 3650, 3680, 4225, 4235, 4245, 4255, 4270, 6150, 6170, 6180, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM number 3531378M1, (Item #: 174311) $17.30

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Clamp - Rear wheel clamp for power adjust rear rims.For tractor models 1080, 1100, 1130, 135, 150, 165, 175, 180, 240, 2640, 282, 290UK, 298, 3050, 3060, 3070, 3090, 35, 3630, 3650, 3680, 390, 398, 399, 4225, 4235, 4245, 4255, 4270, 50, 6150, 6170, 6180, 65, 670, 690, 698, 8120, 8140, 8150, 8160, Super 90, TO35. Also replaces p/n 1755057M2, 70235676. (Item #: 124526, Ref: 898021M1) $18.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.00

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.50

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.10

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.30

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $73.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $21.10

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.90

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $29.00

$Massey Ferguson 698 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 698 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$Massey Ferguson 698 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 698 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Massey Ferguson 698 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 698 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 698 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.20

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Massey Ferguson 698 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.00

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.48

Drawbar - Number Of Drawbar Holes: 11 Hole``Made of 1" x 2-1/2" high carbon steel``Category: 1``Length: 26"``End Pins: 7/8"``Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $77.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $91.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.90

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $71.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $71.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $263.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $119.41

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $148.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $907.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1109.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $71.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $313.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $103.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $410.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $72.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $26.20

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $63.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $33.10

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.50

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $56.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $129.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $63.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $11.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $2.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $143.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $164.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $150.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00