FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Minneapolis Moline G1050 Tractor Parts

[Categories] [All Minneapolis Moline Models] [Print]

Brakes

Brake Disc - This Brake Disc is 8 Inches in diameter. It has a 2 inch 23 spline center. It is used on G900, G1000, G1050, and G1350 Tractors. It replaces original part numbers 70277357V, 20-0006115, 10P2848, 10P3963 (Item #: 150777, Ref: 10P3963) $59.00

Clutch

Clutch Disc, Remanufactured, 10A22726 - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G1000 (Vista), G1000 Vista, G1050, G1350, Compatible with Oliver tractor models 2155, 2655, Replaces OEM number 10A22726, 20-0006116, 20-0008403, Clutch Size: 14", Clutch Hub: 1-3/4", Clutch Spline: 20, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206769) $185.00

Clutch Release Bearing - For tractor models UTL, 445, BigMo 400, BigMo 500, BigMo 600, JetStar 3, Super JetStar 3, JetStar 4, Super JetStar 4, U302, M602, M604, M670, Super M670, G900, G950, G1000, G1000 Vista, G1050, G1350. Inside diameter 2.250 inch outside diameter 3.803 inch width .8085 inch. Replaces 48974D, 649106R91, N1171, A7538, 10A21384GV, 120795R91, 48974DGV, 618237R91, A2526-31, A7538GV, TPAT17464GV, TP-AT17464GV, 104810A, 72160065, AT17464. (Item #: 100013, Ref: 10A21384) $29.60

Pilot Bearing - This is a single row, two seal type bearing. Bore 1.575 inch (40.005mm), outside diameter 2.677 inch (67.995mm), width .591 inch (15.011mm). Replaces 836008, 6008-2RS-I, 30-3065154, 86130BH, 303065154GV, 30-3065154GV, 86130BHGV, 104831A, 30-3057496, 72160313, 1138894, 196047M1. (Item #: 172951, Ref: 72160313) $17.97

Pressure Plate Assembly, Remanufactured, 10A21321 - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G1000 (Vista), G1000 Vista, G1050, G1350, Compatible with Oliver tractor models 2155, 2655, Replaces OEM number 10A21321, 20-0006117, Pressure Plate Size: 14", Pressure Plate Levers: 3, Pressure Plate Springs: 15, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206891) $300.01

Cooling System

Fan, 6 Blade - 20 inch diameter, 1-5/8 inch pilot hole, mounting holes on 1-3/4 inch centers. For tractor models G1000, G1050, G1350, (G1355 serial number 236440 to 252217), (G900, G950 diesel), G955. (Item #: 163840, Ref: 10A21815) $71.00

Water Pump - For tractor models G1050, G1350, (G955 with 425 gas and 451 diesel engine), (G1355, G950 all with 504 engine). (Item #: 172782, Ref: 10B30457) $270.00

Decals and Emblems

No
Picture
Decal Set - Complete for G1050 Gas. Decal Set. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Item #: 102768, Ref: R3519) $93.00

No
Picture
Diesel Decal Set - This is a supplement set which only includes the 3 Diesel specific decals for this model. The main set is listed in this section. (Item #: 102772, Ref: R3958) $11.90

Drive Train

Double Taper Lock Rear Axle Seal - This double taper lock rear axle seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is 0.312 inch wide. It Fits: G1050, G950. Replaces: 20-0000271 (Item #: 106852, Ref: AM220T) $21.10

Gear Shift Boot - For tractor models 3 Star, Jet Star 3, M670, G900, G1000, G1050, G1350. (Item #: 114540, Ref: 10A19825) $16.10

Electrical System

Distributor Cap - For tractor models G1000, G1050, G1350, G1355, G900, G950. (Item #: 105585, Ref: 21A445) $12.60

Distributor Rotor - Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Item #: 111190, Ref: 1954566) $3.40

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 10A15098, 10A21880, 10A29435, 10A969, 169295AS, Cap: 10P326, 10P3967 (Item #: 112273, Ref: 376852R91) $11.10

Engine Bearings

Connecting Rod Bearing - .010" Oversize - Journal - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G704, G705, G706, G707, G708, G900, G950, G955, G1000, G1050, G1350, GB, M5, M504, M602, M604, M670 (Super), M670 Super, UB (series), UT (series), Compatible with Oliver tractor models 2055, 2455, Replaces OEM number 10R1159, Sold per journal, Bearing Size: .010", For Standard connecting rod bearing use Item #: 107407, (Item #: 107405) $113.00

No
Picture
Main Bearing Set - Available in STD, .010, .020 For G705, G706, G1000, G1050 with 504 Diesel Engine. Specify size in Comments box when ordering. (Item #: MS-532P) $271.93

Main Bearings - Standard - Set - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G704, G705, G706, G707, G708, G900, G950, G955, G1000, G1050, G1350, GB, Compatible with Minneapolis Moline Engine (s) 504, Compatible with Oliver tractor models 2055, 2455, Replaces OEM number 10R396, 10R401, 10R954, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 107434, (Item #: 107432) $315.00

No
Picture
Rod Bearing (6 Required) - Available in STD, .010, .020, .030 For G705, G706, G1000, G1050 with 504 Diesel Engine. Specify size in Comments box when ordering. (Item #: 107404, Ref: CB-591P) $137.00

Engine Gaskets

Oil Pan Gasket - For Minneapolis Moline tractor models A4T 1400, A4T 1600, G704, G705, G706, G707, G708, G900, G950, G955, G1000, G1050, G1350, Compatible with Minneapolis Moline Engine (s) 504, Compatible with Oliver tractor models 2055, 2455, Oil Pan Gasket Only, (Item #: 107503) $39.60

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings, 504 - For Minneapolis Moline tractor models G704, G705, G706, G1000, G1050, G1350, Compatible with Minneapolis Moline Engine (s) 504 (gas), Compatible with Oliver tractor models 2455, Cylinder repair sleeves not included, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 107434, (Item #: 130884) $1909.01

Engine Parts

No
Picture
Cylinder Head, Remanufactured, 10A29559 - For Minneapolis Moline tractor models A4T 1600, G1050, Replaces Minneapolis Moline Casting number 10A29559, Cylinders: 6, Casting No. 10A29559, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200541) $980.01

No
Picture
Cylinder Head, Remanufactured, 10A4231 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4231, Casting No. 10A4231, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205515) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4232 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4232, Casting No. 10A4232, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205517) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4233 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4233, Casting No. 10A4233, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205518) $1100.01

No
Picture
Cylinder Head, Remanufactured, 10A4240 - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4240, Casting No. 10A4240, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205516) $1100.01

No
Picture
Cylinder Head, Used - For Minneapolis Moline tractor models G705, G900, G950, G1000, G1050, M5, M602, M670 (square ports - Gas or LP), Replaces Minneapolis Moline Casting number 10A4232, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205517, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405517) $550.01

Intake Valve - For Minneapolis Moline tractor models G, G704, G705, G706, G900, G955, G1000, G1050, G1350, GB, GTB, GTC, M5, M504, M602, M604, M670, M670 Super, U, UB, UT, UTS, 5 Star, Compatible with Minneapolis Moline Engine (s) 283, 336, 403, 425, 504 (all gas engines), Replaces Minneapolis Moline OEM number 10A17913, Length: 6.67", Sold individually, (Item #: 128652) $20.30

Exhaust System

Muffler - For tractor models G705, G706, G707, G708, G1000, G1000 Vista, G900, G950, G1050. 1-1/2 inch inlet length, 3-15/16 inch inlet inside diameter, 19 inches shell length, 3-1/2 inch outlet length, 4 inch outlet outside diameter, 24 inches overall length. (Item #: 102672, Ref: 10A29916) $80.00

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 10P2645 (Item #: 111242, Ref: 28A116) $14.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $25.20

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, 10P1553, 10P1701. For models BigMo 400, BigMo 500, G1000, G1050, G1350, G1355, G705, G706, G950, G955, GVI, JetStar, JetStar 3, Super Jetstar 3, M5, M602, M604, M670, 3 Star, 4 Star, 4 Star Super. (Item #: 111241, Ref: 373662R91) $10.10

Oil System

No
Picture
Oil Filter Element - For tractor models 5 Star, G900, G950, G1000 Vista, G1050, G1350, M5, M602, M604, M607, M670. (Item #: 158863, Ref: 10A10423) $18.70

PTO / Driveline

PTO Clutch Plate, Driven - 6-9/16 inch outside diameter. For tractor models Big Mo 400, G1000, G1050, G1350, G950, Jet Star Orchard, Jet Star 3, Jet Star 4, Jet Star 5 Super, M5, M504, M602, M604, (M670 gas and LP serial number up to 29901891, diesel serial number up to 30000819). (Item #: 167368, Ref: 10P1459) $37.50

PTO Clutch Plate, Driven - 6.00 inch outside diameter. For tractor models G1000, G1050, G1350, G950, Jet Star 3, (M670 gas and LP serial number up to 29901891, diesel serial number up to 30000819). (Item #: 172471, Ref: 10P2664) $15.98

Seats

Seat Back - Black vinyl on wood part of three piece set. For G900, G950, G1000, G1050, JetStar 3, M670, U302 (each piece sold separately). (Item #: 101333, Ref: R1182) $173.00

Seat Back - White vinyl on wood part of three piece set. For G900, G950, G1000, G1050, JetStar 3, M670, U302 (each piece sold separately) (Item #: 182108, Ref: R1185) $128.00

Seat Bottom - Black vinyl on wood part of three piece set. For G900, G950, G1000, G1050, JetStar 3, M670, U302 (each piece sold separately) (Item #: 101332, Ref: R1181) $130.00

No
Picture
Seat Bottom - White vinyl on wood part of three piece set. For G900, G950, G1000, G1050, JetStar 3, M670, U302 (each piece sold separately). (Item #: 182102, Ref: R1184) $118.00

No
Picture
Seat Upper Back - White vinyl on wood part of three piece set. For tractor models G900, G950, G1000, G1050, Jet Star3, M670, U302 (each piece sold separately). (Item #: R1186) $25.99

Steering

Rubber Dust Cover For Tilt Steering Wheel - The measurements on this Dust Cover are 2.498 inch outside diameter and 1.350 inches tall. Replaces 30-3346595, 30-3080080, 10A30798, 10A23441, 30A158, 70266946. Used on A4T 1400, A4T 1600, G900, G950, G955, G1000, G1000 Vista, G1050, G1350, G1355, GB, Jet Star 3, Jet Star 3 Super, M670, M670 Super (Item #: 115580) $26.10

$Minneapolis Moline G1050 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 12.50 inch, B= 2.250 inch, C= 2.00 inch, D= 1.50 inch. For tractor models G1350, G1355, G2155, G955, (G1050, G900, G950 all heavy duty). Replaces 11A26941. The wheel bearing kit used on this spindle is kit part number WBKWH7. (Item #: 102696, Ref: 72160101) $595.00

No
Picture
Steering Wheel - 15 inch diameter, 36 spline, 13/16 inch shaft, 3 covered spokes. For tractor models JetStar 3, Super JetStar 3, Super M670, G900, G955, G1000, G1050, G1350, G1355, U302. (Item #: 121917, Ref: 10A23441) $58.00

No
Picture
Steering Wheel Cap - Comes with o-ring, used with 1015446M91 and 10A23441 steering wheels. For tractor models 445, 4 Star, Super 4 Star, JetStar, 5 Star, M5, M504, G705, G706, G707, G708, GVI, JetStar 3, G1000, G1050, G1350, G1355, U302, Super JetStar 3, M670, M602, M604. Replaces 10A14434, 10A22902, 10A14477. (Item #: 121918, Ref: 10A15590) $55.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Wheels

Front Wheel Hub - Includes inner and outer races. For tractor models G1350, G1355, G2155, G955, (G1050, G900, G950 all heavy duty). Replaces 30-3156729. (Item #: 105226, Ref: 72160484) $102.00

Inner Front Wheel Seal - This inner front wheel seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. It Fits: G1000 Vista, G1050, G1350, G1355, G900, G950, G955. Replaces: 10A26954 (Item #: 106145, Ref: A57342) $9.60

Rim Clamp, Used - For Minneapolis Moline tractor models A4T 1400, A4T 1600, Big Mo, Big Mo 500, G900, G950, G1000, G1000 Vista, G1050, Jet Star 3 Super, M602, M604, M670, M670 Super, 5 Star Replaces Minneapolis Moline OEM nos 10A8474, , Compatible with Oliver tractor models 90, 500, 2655 Replaces Oliver OEM nos 10A8474, , Compatible with White tractor models 2-135, 2-155, 2-180, 4-210, 4-225, 4-270, 100, 120, 125, 140, 145, 160, 170, 185, 195, Replaces White OEM nos 10A8474, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430076) $12.26

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 10P796. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 2788 bearing, 2720 bearing, LM104949 bearing cone, LM104911 cup, 72161723 seal. For tractor models G1050, G1355, G900, G950. (Item #: 100010, Ref: WBKWH7) $37.90

Wheel Bolt - This wheel bolt fits the following tractor models: Big Mo 400, JetStar, JetStar 2, JetStar 3, R, U, U302, Z, ZA, ZB, 335, 445, G1000, G1050, G1350, GB, GBI, and GTB. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number: 10A7573. (Item #: 108605, Ref: WB916) $2.30

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

No
Picture
MM Logo Decal - "Power Implement Company", 4 inch x 7 inch, printed on vinyl. (Item #: 183599, Ref: R5193) $20.20

MM Logo Decal - 1/2 inch x 1 inch, printed on vinyl. (Item #: 183054, Ref: R5238) $3.80

Electrical System

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (HA) (Item #: 109511, Ref: 782979) $19.90

$Minneapolis Moline G1050 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Minneapolis Moline G1050 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Minneapolis Moline G1050 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Minneapolis Moline G1050 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Minneapolis Moline G1050 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Minneapolis Moline G1050 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Minneapolis Moline G1050 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

ZNL89020C.jpg - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 NPT inch thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Prairie Gold, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108378, Ref: TP520GAL) $119.00

No
Picture
Paint, Prairie Gold, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108377, Ref: TP520QT) $44.80

No
Picture
Paint, Prairie Gold, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108374, Ref: TP520SP) $9.80

No
Picture
Paint, Red, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108384, Ref: TP525GAL) $66.00

No
Picture
Paint, Red, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108383, Ref: TP525QT) $23.60

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Red, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108382, Ref: TP525SP) $10.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 10A22565, 10A27292, 10A9409, 10A9839, 11A989 (Item #: 103768, Ref: FW60166) $92.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00