FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Oliver 1800 Tractor Parts

[Categories] [All Oliver Models] [Print]

Brakes

Brake Actuating Disc - For tractor models White 4-150, White 4-180, (1850, 1950 SN# 150421 and up), (1750 SN# 180537 and up), (1800, 1900 SN# 90525 and up). (Item #: 105801, Ref: 105725AS) $241.00

No
Picture
Brake Actuator Assembly, Used - For Oliver tractor models 1750 (after s/n 180537), 1800 (after s/n 90525), 1850 (after s/n 150421), 1900 (after s/n 90525), 1950 (after s/n 150421) Replaces Oliver OEM number 105725AS, , Compatible with White tractor models 4-150, 4-180, For a new version of this item use Item #: 105801, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435374) $131.01

Brake Disc, Bonded - 8.00 inch outside diameter, 5.00 inch inside diameter, 21 spline hub, fits 2.750 inch shaft diameter. For tractor models 1750, 1755, 1800, 1850, 1855, 1870, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-150, White 2-85, White 2-88, 2050, 2255, 2270, White 4-175, White 4-180. (Item #: 105806, Ref: 303135241) $18.50

Clutch

Clutch Bearing Carrier - This clutch bearing carrier has an outside diameter on the bearing seat of 2.252 inches. For tractor models 100, 120, 125 Workhorse, 140, 145 Workhorse, (1750 SN# 180537 and up), 1800, 1850, 1950, White 2-135, White 2-155. Replaces 104809AS, 167999AS. Used with clutch bearing part number 30-3056287. (Item #: 109783, Ref: 72160064) $88.00

No
Picture
Clutch Disc - For Oliver tractor models 950, 990, 995, 1800, 1900 Replaces Oliver OEM number 105635AS, , Compatible with White tractor models 2-115, 4-115, Replaces White OEM number 105635AS, 14" Diameter, 1-3/4", 27 Spline, Additional Handling and Oversize Fees Apply To This Item, (Item #: 166084) $170.00

Clutch Disc, Organic - 13" x 1-3/4"-27. For tractor models (1750 SN# up to 190957), (1800, 1850 up to SN# 198393 gas), (1850 up to SN# 194007 diesel with flat flywheel). (Item #: 172439, Ref: 160974AS) $155.00

Clutch Disc, Remanufactured, 105633AS - For Oliver tractor models 1750 (Gas, s/n 190958 - earlier and s/n 191356 - 191513), 1750 (Diesel, s/n 190958 - earlier), 1800, 1850, 1855, Replaces Oliver OEM number 105633AS, 160974A, 160974AS, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 27, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 204577) $175.50

Clutch Disc, Remanufactured, 105633AS - For Oliver tractor models 1750 (Diesel, s/n 190958 - earlier), 1750 (Gas, s/n 190958 - earlier and s/n 191356 - 151913), 1800, 1850, 1855, Replaces Oliver OEM number 105633AS, 160974A, 160974AS, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 27, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 206780) $192.50

Clutch Disc, Remanufactured, 105633AS - For Oliver tractor models 1750 (Diesel, s/n 1900958 - earlier), 1750 (Gas, s/n 190958 - earlier and s/n 191356 - 191513), 1800, 1850, 1855, 1900, 1950T, 1955, 2050, Replaces Oliver OEM number 105633AS, 160974A, 160974AS, Size: 13", Hub: 1-3/4", Spline: 27, Center: Spring, Type: Woven, For a New version of this sku use Item #: 172439, (Item #: 206781) $108.00

Clutch Disc, Remanufactured, 165356A - For Oliver tractor models 1750 (Gas, s/n 190958 - 191355 and 191514 - later), 1750 (Diesel, s/n 190958 - later), 1755, 1800, Compatible with White tractor models 2-85, 2-88, 60 American, 80 American, Replaces OEM number 165356A, 30-3462412, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 27, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 206776) $134.00

Clutch Disc, Remanufactured, 165356A - For Oliver tractor models 1750 (Diesel, s/n 190958 - later), 1755, 1800, Compatible with White tractor models 2-85, 2-88, 60 American, 80 American, Replaces OEM number 165356A, 30-3462412, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 27, Clutch Center: Spring, Clutch Type: 4 Lg Pads, (Item #: 206777) $150.50

Clutch Disc, Remanufactured, 165356A - For Oliver tractor models 1750 (Diesel, s/n 190958 - later), 1750 (Gas, s/n 190958 - 191355 and 191514 - later), 1755, 1800, Compatible with White tractor models 2-85, 2-88, 60 American, 80 American, Replaces OEM number 165356A, 30-3462412, Clutch Size: 12", Clutch Hub: 1-3/4", Clutch Spline: 27, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 206778) $209.00

Clutch Kit, Remanufactured - For Oliver tractor models 1750 (Gas S/N 190957-earlier and 191356-191513 and Diesel S/N 190957-earlier), 1800, 1850, 1855, 1950, 1955, 2050, Clutch Diameter - 13", Clutch Hub Diameter - 1-3/4", Clutch Splines - 27, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 13", Pressure Plate Levers - 4, Pressure Plate Springs - 16, Pressure Plate Type - Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202069) $352.30

Clutch Pilot Bearing - For tractor models 1750, 1755, 1800, 1850, 1855, 1900T, 1950GM, 1955, 2050, 2255. (Item #: 107490, Ref: 30-3065154) $12.60

Clutch Shaft - 11.64" long, 27 spline. For tractor models (1850 SN# 150421 and up), (1750 SN# 180537), (1800, 1900 SN# 90525 and up without Hydra power or creeper drive). (Item #: 172379, Ref: 104844A) $292.00

Clutch Shaft - 8.89" long, 27 spline. For tractor models (1850 gas SN# 150421-198393 and diesel SN# 150421-194007), (1750 SN# 180537-190957), (1800, 1900 SN# 90525 and up without hydra power or creeper drive). (Item #: 173450, Ref: 104837A) $325.00

Clutch Shaft Coupler - 3.37" long, 27 spline. For tractor models (1850 SN# 150421 and up), (1750 SN# 180537 and up), (1800, 1900 SN# 90525 and up without hydra power or creeper drive). (Item #: 172437, Ref: 104834A) $117.00

Pressure Plate Assembly, Remanufactured - For Oliver tractor models 1750, 1800, 1850, 1855, 1950, 1955, 2050, Pressure Plate Size: 13", Pressure Plate Levers: 4, Pressure Plate Springs: 16, Pressure Plate Type: Single Stage, (Item #: 206897) $144.01

Pressure Plate Assembly, Remanufactured, 105621AS - For Oliver tractor model 1800, Replaces Oliver OEM number 105621AS, 107175AS, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206895) $109.00

Pressure Plate Assembly, Remanufactured, 105627AS - For Oliver tractor models 1750 (Gas, s/n 190958 - earlier and s/n 191356 - 191513), 1750 (Diesel, s/n 190958 - earlier), 1800, 1850, 1855, 1950, 1955, 2050, Replaces Oliver OEM number 105627AS, 105627ASA, 160973AS, 164005AS, 168011AS, Pressure Plate Size: 13", Pressure Plate Levers: 4, Pressure Plate Springs: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206896) $170.00

Release Bearing Fork - Throwout Bearing Fork for Models: (1550, 1555 SN# 160000 and up), 160, (1650, 1655 SN# 147569 and up), 170 Workhorse, (1750 SN# 180537 and up), 1755, (1800, 1900 SN# 90525 and up), 185, (1850, 1950 SN# 150421 and up), (1855, 1955 SN# 220000 and up), (195 Workhorse, (2050, 2150 SN# 204001 and up), (White 2-105, White 2-110, (White 2-135 SN# 272595 to 292563), (White 2-150, White 2-155, White 2-180, (2255 SN# 235650 and up), 2270, (White 2-62 SN# 160000 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), White 2-85, White 2-88, White 4-150, White 4-175, White 4-180, White 4-225, 60 American, (770, 880 SN# 60501 and up), 80 American. Replaces 101510A. (Item #: 172793, Ref: 72160045) $153.00

Cooling System

No
Picture
Radiator Cap - This Radiator Cap is for 3/4 inch neck radiators. 2.021 inch tab to tab 3.463 inch outside diameter of cover. MEASURE BEFORE ORDERING It is 7 psi. Not Chrome like original. Replaces 101520A, 155239A, 155611A, 168380AS, 1K507, 30-3225917, 30-3225941 (Item #: 114731, Ref: 531505M91) $17.30

Radiator Hose, Bypass - 1.75" I.D.. For tractor models 1650, 1655, (1750 SN# 180537 and up), (1755, 1855, 1955 SN# 220000 and up), 1800, (1850 SN# 150421 and up), 1900, 1950, (1950T SN# 195080 and up), White 2-78, White 4-78, White 2-70. (Item #: 159289, Ref: 168494A) $33.50

Radiator Hose - Lower - For Oliver tractor model 1800 (gas/diesel s/n 124396-later), Replaces Oliver OEM number 104699A, 2.25" I.D., For Hose Clamp use Item #: 111917, (Item #: 159191) $14.30

Radiator Hose - Upper - For Oliver tractor model 1800 (Gas/Diesel s/n 90525-later, LP s/n 140077), Replaces Oliver OEM number 104701A, 2.0" I.D., For Hose Clamp use Item #: 130469, (Item #: 159193) $16.80

Radiator Hose - Upper - For Oliver tractor model 1800 (LP s/n 90525-140076), Replaces Oliver OEM number 104742A, 2.0" I.D., For Hose Clamp use Item #: 130469, (Item #: 159195) $10.07

Radiator Hose, Upper - 2.00" I.D.. For model 1800 rc lp SN# 90525-140076. (Item #: 159194, Ref: 104741A) $12.98

Water Pump - With pulley. For model 1800 up to SN# 124395. (Item #: 113668, Ref: 104354AS) $179.00

Water Pump - This water pump replaces casting numbers 156060 or 169188. For model 1800 LP gas SN# 124396 to 134683. DOES NOT COME WITH GASKET and we do not have the gasket available. (Item #: 157324AS) $147.40

Water Pump - For tractor models (1650 diesel SN# 187586 and up), (1655 diesel), (1750 gas and diesel), (1800 SN# 124397 and up), (1850 gas), 1855, 1950T, 1955. Casting number 221560. Used with short single pulley (NOT included). Replaces 157069AS, 159925AS, 162095AS (Item #: 108108, Ref: 157069AS) $156.00

Water Pump - For tractor models (1800 gas or diesel SN# 124396 to 134683), (1850 gas or LP SN# 150421 and up), (1855 gas SN# 220000 and up and diesel SN# 220000 to 244324), (1750 SN# 180537 and up), (1955 SN# 220000 and up). (Item #: 172656, Ref: 162095AS) $355.00

Water Pump Gasket - Backplate to Block - For Oliver tractor models 1650 (s/n 187586-later), 1655 (s/n 147569-later), 1750, 1755, 1800 (s/n 134684-later), 1850 (gas / LPG), 1855 (gas / diesel), 1950, 1955 (gas / diesel) Replaces Oliver OEM number 156300A, , Compatible with White tractor models 2-70, For Water Pump use Item #: 161199, (Item #: 161200) $4.80

Water Pump Gasket - Backplate to Block - For Oliver tractor model 1800 (s/n 124395-earlier), Replaces Oliver OEM number 105551A, For Pump to Backplate Gasket use Item #: 113668, (Item #: 161201) $0.60

Water Pump Gasket - Pump to Backplate - For Oliver tractor models 1650 (s/n 187586-later), 1655 (s/n 147569-later), 1750, 1755, 1800 (s/n 134684-later), 1850 (gas / LPG), 1855 (gas / diesel), 1950, 1955 (gas / diesel) Replaces Oliver OEM number 156301A, , Compatible with White tractor models 2-70, For Water Pump use Item #: 161200, (Item #: 161199) $1.40

Water Pump Gasket - Pump to Backplate - For Oliver tractor model 1800 (s/n 124395-earlier), Replaces Oliver OEM number 105550A, For Water Pump use Item #: 161201, (Item #: 161202) $0.90

Water Pump, Remanufactured, 104354AS, 221060 - For Oliver tractor model 1800, Replaces Oliver OEM number 104354AS, 104354ASA, Replaces Oliver Casting number 221060, 104354, Includes pump to backplate gasket, Includes backplate to block gasket, For a New version of this sku use Item #: 113668, (Item #: 206980) $125.01

Water Pump, Remanufactured, 157069AS, 221560 - For Oliver tractor models 1650 (s/n 187586-later), 1655 (s/n 147569-later), 1750, 1755, 1800 (s/n 134684-later), 1850 (gas / LPG), 1855 (gas / diesel), 1950, 1955 (gas / diesel), Compatible with White tractor models 2-70, Replaces OEM number 157069AS, 159925AS, 162095AS, 164030AS, 30-3023486, Replaces Casting number 221560, 157069, Includes pump to backplate gasket, Includes backplate to block gasket, For Backplate to Block Gasket use Item #: 161199, (Item #: 206981) $153.01

Decals and Emblems

No
Picture
Decal Set - For 1800 Series Gas. Black and Chrome. Complete decal set. Made of Vinyl. (Item #: 102847, Ref: R2408) $93.00

No
Picture
Decal Set - For 1800 Series Diesel. Black and Chrome. Complete decal set. (Item #: 102848, Ref: R3491) $103.00

Oliver Decal Set, Finest in Farm Machinery, 10", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 10", Vinyl decal, (Item #: 102950) $29.70

$Oliver 1800 Oliver Decal Set, Finest in Farm Machinery, 1-7\8 inch, Vinyl$
Oliver Decal Set, Finest in Farm Machinery, 1-7/8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 1-7/8", Vinyl decal, (Item #: 102946) $3.80

Oliver Decal Set, Finest in Farm Machinery, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 4", Vinyl decal, (Item #: 102947) $11.20

Oliver Decal Set, Finest in Farm Machinery, 6", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 6", Vinyl decal, (Item #: 102948) $18.60

Oliver Decal Set, Finest in Farm Machinery, 8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Finest in Farm Machinery", 8", Vinyl decal, (Item #: 102949) $20.50

$Oliver 1800 Oliver Decal Set, Keystone, 1-7\8 inch, Vinyl$
Oliver Decal Set, Keystone, 1-7/8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 1-7/8", Vinyl decal, (Item #: 102942) $3.80

Oliver Decal Set, Keystone, 3", Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone shield, 3" Mylar decal, (Item #: 102958) $3.80

Oliver Decal Set, Keystone, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 4", Vinyl decal, (Item #: 102943) $14.90

Oliver Decal Set, Keystone, 7", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 7", Vinyl decal, (Item #: 102944) $20.50

Oliver Decal Set, Keystone, 9", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Keystone, 9", Vinyl decal, (Item #: 102945) $26.00

$Oliver 1800 Oliver Decal Set, Sales\Service, 10 inch, Vinyl$
Oliver Decal Set, Sales/Service, 10", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 10"diameter, Vinyl decal, (Item #: 102954) $29.70

$Oliver 1800 Oliver Decal Set, Sales\Service, 4 inch, Vinyl$
Oliver Decal Set, Sales/Service, 4", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 4"diameter, Vinyl decal, (Item #: 102951) $10.10

$Oliver 1800 Oliver Decal Set, Sales\Service, 6 inch, Vinyl$
Oliver Decal Set, Sales/Service, 6", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 6"diameter, Vinyl decal, (Item #: 102952) $18.60

$Oliver 1800 Oliver Decal Set, Sales\Service, 8 inch, Vinyl$
Oliver Decal Set, Sales/Service, 8", Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, "Sales and Service", 8"diameter, Vinyl decal, (Item #: 102953) $20.50

Oliver Decal Set, Shield, 10" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 10" Red, Vinyl decal, (Item #: 102941) $29.70

$Oliver 1800 Oliver Decal Set, Shield, 1-1\2 inch Red and Green, Mylar$
Oliver Decal Set, Shield, 1-1/2" Red and Green, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-1/2" Red, Mylar decal, (Item #: 102956) $3.80

$Oliver 1800 Oliver Decal Set, Shield, 1-1\2 inch Red, Green and Black, Mylar$
Oliver Decal Set, Shield, 1-1/2" Red, Green and Black, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-1/2" Red, green and black, Mylar decal, (Item #: 102955) $3.80

$Oliver 1800 Oliver Decal Set, Shield, 1-7\8 inch Red, Vinyl$
Oliver Decal Set, Shield, 1-7/8" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 1-7/8" Red, Vinyl decal, (Item #: 102937) $3.80

Oliver Decal Set, Shield, 3" Red and Green, Mylar - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 3" Red, Mylar decal, (Item #: 102957) $3.80

Oliver Decal Set, Shield, 3" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 3" Red, Vinyl decal, (Item #: 102938) $7.30

Oliver Decal Set, Shield, 6" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 6" Red, Vinyl decal, (Item #: 102939) $18.60

Oliver Decal Set, Shield, 8" Red, Vinyl - For Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 80, 88, 90, 99, 440, 550, 660, 770, 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2655, Compatible with Oliver Construction and industrial models OC3, OC6, Oliver shield, 8" Red, Vinyl decal, (Item #: 102940) $20.50

Drive Train

Coupler Sprocket - 14 teeth, 27 spline. For tractor models (1850 SN# 150421 and up without hydra power, ober under or creeper drive), (1750 SN# 180537 and up), (1755, 1855 SN# 220000 and up), (1800, 1900 SN# 90525 and up). (Item #: 172448, Ref: 104842A) $92.00

Coupler Sprocket, Front - 2.50" seal area diameter, 14 teeth, 30 spline. For tractor models (1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 with Hydra power or creeper drive). (Item #: 114308, Ref: 107415A) $89.00

Coupler Sprocket, Rear - 27 spline. For tractor models (1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 all with hydrapower, O/U Hydra shift, creeper drive). (Item #: 110748, Ref: 107416A) $110.00

Drive Coupler Chain - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 1955, Replaces Oliver OEM number 107417AS, With connector link, For 2 piece coupler, (Item #: 110747) $56.00

No
Picture
Drive Coupler Chain, Used - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 1955, Replaces Oliver OEM number 107417AS, With connector link, For 2 piece coupler, For a new version of this item use Item #: 110747, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435506) $32.40

Shift Knob - For tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 70, 66, 77, 88, 660, 770, 880, 950, 990, 995, 1550, 1650, 1750, 1800, 1850, 1950, 1950T, 2050, 2150, 1555, 1655, 1755, 1855, 1900, 1955, 2255, 2-44, 2-70, 2-85, 2-88, 2-105, 100, 120, 125 WORKHORSE, 140, 145 WORK HORSE, 160, 170, 185, 195. Replaces 103098A, B909A, 72160047. (Item #: 110012, Ref: BB7213A) $4.20

Transmission Input Shaft - For tractor models G940, 1750, 1755, 1850, 1855, (1800, 1900 ALL SN# 124396 AND UP with PRESSURE LUBE), 1950 SN# 150421-189006. This shaft is 12.454"long. Spline Count 27 and 18 Spline. (Item #: 111399, Ref: 156892A) $525.00

Electrical System

Cigarette Lighter Weather Cap - For Oliver tractor models 770, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1855, 1900, 1950, 1950T, 1955, 2050, 2055, 2150, 2155, 2255, 2270, 2455, 2655 Replaces Oliver OEM number 159666A, , Compatible with White tractor models 2-70, 2-85, 2-88, 2-110, 2-135, 2-150, 2-155, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225, 4-270, Replaces White OEM number 159666A, Black Rubber Boot., 1-3/8" outer diameter, 1/8" hole, 1/2" tall, (Item #: 126118) $2.10

Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models 1555, 66, 77, 88, Super 66, Super 77, Super 88, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Item #: 105695, Ref: A4653R) $7.00

Delco Distributor Cap - SCREW held cap-6 cylinder. Replaces part #156356AS. For tractor models 1800, 1870, 2270. (Item #: 105585, Ref: S.66464) $12.70

Distributor - This New Distributor, with Tach Drive is complete with points, condenser, rotor and cap. It is used on (Cockshutt; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855), (Oliver; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 77, 770, 88, 880, Super 77, Super 88), (White; 2-62, 2-70, 2-78, 4-78). This distributor will be a direct replacement for distributors with tachometer drives. If you have a tachometer drive just below your distributor, you will have to remove the drive assembly and create a cover plate and gasket to cover the hole where the tachometer drive is removed. You will then use the tachometer drive on the distributor. This is a mechanical advance distributor. If you have a vacuum advance, you will no longer use vacuum advance. For tune up, order ATK1DCR points, rotor and condenser, and 21A443 Cap. Replaces 158859AS, 1K7324, 1111702, 1111750, 1KA7324, 101129AS, 60261-C, 60261C, 30-3417778, D2563-1AA, 156126-AS, 156126AS, 1112632, 1112603, 106106AS. (Item #: 163591, Ref: R8119) $371.00

Distributor Cap - For tractor models 1600, (1800 SN# 124396 and up). Replaces Delco 1960810. (Item #: 105585, Ref: 21A445) $12.70

Distributor Cap - Replaces Delco 824735. For tractor models (77, 770, 88, 880, Super 77, Super 88, Super 99, 1800 all serial number up to 124395). Replaces: 1K7406, K7406, 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320 (Item #: 104557, Ref: 21A443) $12.00

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models Super 44, 440, 60, Super 55, 550, 66, Super 66, 660, 70, 77, Super 77, 770, 88, 880, 90, 99, 1600, (1800 up to serial number 124395), Cockshutt 540, Cockshutt 550, Cockshutt 570. (Item #: 103153, Ref: 1900119) $9.00

Distributor Dust Cover - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $18.00

Distributor, Remanufactured, Delco Remy, 1112603 - For Oliver tractor model 1800, Replaces Delco Remy manufacturer number 1112603, Includes; New distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, For Dust Cover use Item #: 104557, (Item #: 205102) $265.01

Distributor Rotor - Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Item #: 111190, Ref: 1954566) $3.80

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some Cockshutt 550, Cockshutt 570, Super 55, Super 66, Super 77, Super 88, Super 99, 1800, 1900, 550, 660, 770, 880, 950, OC4, 551, 552, White 2-44. Replaces: 1H7431, 1H7437, 1K7430, 1K7433, 1K7434A, 1K7445, 7A7820, MA467, MA624, MA625, MA626, MA627, MA628, MA629 (Item #: 111468, Ref: 1904376) $14.40

Electronic Ignition Conversion Kit, 12 volt negative ground - For 77, 88, 99, 770, 880, 1600, 1800. For the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Item #: 105076, Ref: 1168LS) $164.00

Electronic Ignition Conversion Kit, 12 Volt Negative Ground. - For Tractor Models 1600 and 1800 using Delco distributor # 1112632. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Item #: 105074, Ref: 1163A) $145.00

Electronic Ignition Conversion Kit, 6 volt positive ground - Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower and spark plug life, improves fuel economy. Precisely engineered solid-state electronics. Distributors with clip type cap. Use on the following tractors with 6 Volt Positive Ground system ONLY. Models 77, 88 Wauk or Oliver engines, 99, 770, 880, 1600, 1800. Distributor numbers: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 112587, 1112603, 1112632. (Item #: 105077, Ref: 1168LSP6) $176.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 103427A, 103427AS, 105118AS, Cap: 106366A, 169295AS (Item #: 112273, Ref: 376852R91) $10.90

Ignition Kit, Delco Screw-Held Distributor Cap - This Ignition Kit is for Delco distributors with Screw-Held Distributor Cap. Contains points, rotor, condenser. (Item #: 105278, Ref: ATK10DSR) $10.70

Ignition Tune-up Kit - For Delco Clip-Held Cap Distributor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Includes points, condenser, and rotor. For tractor models 44, 90, 900, 55, 60, 66, 99, 550, 70, 77, 88, 770, 880, 950, Super 44, Super 55, Super 66, Super 77, Super 88, Super99, 440, 660, 1800, AG, AG6, BG, DG, OC4, OC6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Item #: 103151, Ref: ATK1DCR) $9.50

Light Switch - 4 position, uses A4653R lever.DOES NOT COME WITH LEVER. For tractor models 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Item #: 107949, Ref: 30-3365891) $65.00

Rotor - Used with Delco distributors with a clip held cap. For tractor models: 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 90, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 950, 1800 (up to serial number 124395 with 111263). Replaces 1H7416 and 1K7416. (Item #: 110177, Ref: 1750498M1) $3.60

No
Picture
Spark Plug - For tractor models White 2-78, White 4-78, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900. Replaces 157803A, Autolite AL65 and Champion N12YC. Verify correct spark plug size and type. Price is for one plug. (Item #: 172892, Ref: 834236M1) $4.40

Starter - 12 Volt, comes with a 4 post solenoid (Some used a 3 post and is available separately as Part # A-101059AS). For tractor models (1600, 1800 Gas, 1961-64), (550, 770, 1650, 1850, 1964-65), (1550, 1650, 1750, 1850, 1950 Gas, 1967-69), (770 Gas 1967-68), (550 Gas 1967-69), (55, 66, 77, 88, 88 Gas (White) all 1957), (550, 770, 880 Gas (White) 1958-60), (550 Gas 1971-73). (Item #: 160366, Ref: 1107682) $504.00

Starter - This is a Remanufactured starter, 12 Volt and comes with a 4 post solenoid (Some used a 3 post and is available separately as Part # A-101059AS). For tractor models (1600, 1800 Gas, 1961-64), (550, 770, 1650, 1850, 1964-65), (1550, 1650, 1750, 1850, 1950 Gas, 1967-69), (770 Gas 1967-68), (550 Gas 1967-69), (55, 66, 77, 88, 88 Gas (White) all 1957), (550, 770, 880 Gas (White) 1958-60), (550 Gas 1971-73). Add $80.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. Replaces 1107358, 1107833, 1107847, 1108130, and 1108142. (Item #: 203151, Ref: 1107682R) $376.00

Starter Drive - Services starters 1107539, 1113098, 1113139. For tractor models 550, 770, 880, 1600, 1650, 1800. Replaces 1941157. (Item #: 164393, Ref: 605961AS) $31.30

Starter Drive - For tractor models 2310, 2600, 2810, (U, ZAU ALL SERIES with DELCO STARTER 1107905), (0C6, 60, 70, 80 ALL with 6 VOLT DELCO STARTERS 1107065 and 1107939). (Item #: 109966, Ref: 1850844) $37.70

Starter Drive Spring - Services 6 volt starters Delco 738-U, 1107065, 1107939 on Models: 60, 70, 80, 55, 66, 77, 88, OC-6. 12 volt starter 1107682 on Models: 55, 66, 77, 88, 550, 770, 880, 1600, 1800. Replaces Delco 1850812. (Item #: 111380, Ref: B7720) $35.30

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $52.00

Starter Solenoid - Switch services starter 1107682, 12 volt, three post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractor models 55, Super 44, Super 55, Super 66, Super 77, Super 88, 1600, 1800, 440, 550, 66, 660, 77, 770, 88, 880, 950. Replaces 101059AS, Delco DR1467. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

Starter Solenoid - Switch assembly services starters 1113088, 1113098, 113139, 113656. For tractor models 1600, 1650, 1655, 1700, 1750, 1755, 1800, 1850, 1855, 1900. Replaces Delco 1115510 and 1119885. Supersedes 101609AS. 159711AS (Item #: 105672, Ref: 1115510) $29.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 105386A, 105386A, 1K7392A, 1K7392C, 72160068, 7A7392, K7392A, T18524, TG07803, TO18117, TO7803. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit for Delco Distributor - SCREW held cap-6 cylinder. Includes points, condenser, rotor, Autolite 386 plugs-18mm threads. For tractor models 1800, 1870, 2270. (Item #: 183870, Ref: S.66468) $53.00

Voltage Regulator - 12 volt, replaces Delco 1118997, Oliver 105114A. The Three Post side of this regulator may be parallel or slightly splayed. For tractor models 1600, 1800, 1900. Using generator 1100419. Replaces 121577C1, 1118381, 1118779, 1118977, 1118981, 1118987, 1118993, 1118997, 1118999, 1119191, 1119576 (Item #: 105581, Ref: 182548M92) $27.00

Engine Bearings

No
Picture
PTO Drive Hub - For Oliver tractor models 1750 (s/n 180537-190957), 1800, 1850 (s/n 150421-198393), 1900, 1950, Replaces Oliver OEM number 103966A, 164309A, Size: 6-1/4", Hub Size: 1-1/8", Splines: 17, Center: Spring, (Item #: 176830) $176.00

Engine Gaskets

No
Picture
Conversion Gasket Set - Converts head gasket set into overhaul gasket set. For tractor models (1650, 1655, White 2-70 diesel up to SN# 187585), (1750, 1755 gas or diesel), (1800 from SN# 124396 gas or diesel), (1850, 1855, 1950 with 310 Waukesha gas). (Item #: 131602, Ref: CS3809) $118.00

Front Crankshaft Seal - Spring loaded cork, for 2-13/16 inch opening. O.D. of cork is 2.650 inches, O.D. of steel retainer is 3.118 inches, Thickness of complete assembly is 0.750 inches uncompressed. Replaces K126, K126, K126, 180087 (Item #: 107599) $141.00

No
Picture
Head Gasket Set - For 1800 after S#124396) Gas (Item #: HS3809W) $274.33

Head Gasket Set - For model 1800 (From S#124396) Diesel. (Item #: 107620, Ref: HS3809) $260.00

Valve Cover Gasket - For Oliver tractor models Super 88, 88, 880, 1650, 1655, 1750, 1755, 1800 Replaces Oliver OEM number 190040E, , Compatible with Waukesha Engine (s) D283, D310T, G231, Compatible with White tractor models 2-70, 2-78, Replaces White OEM number 190040E, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158303) $8.60

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings - Indirect Injection, Waukesha, D310 - For Oliver tractor models 1750 (1964-1965 with Lanova injection), 1800 (s/n 124395-later), Compatible with Waukesha Engine (s) D310 (diesel, naturally aspirated, indirect injection), Bore: 3.875", Stroke: 4.375", Flat top pistons, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 107441, (Item #: 130909) $3429.01

Engine Parts

No
Picture
Bare Block, Remanufactured, 106085A - For Oliver tractor model 1800, Replaces Oliver Casting number 106085A, 221020D, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204878) $1100.01

No
Picture
Bare Block, Remanufactured, 155720A - For Oliver tractor models 1800, 1850, Replaces Casting number 155720A, 221120, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204880) $1225.01

No
Picture
Bare Block, Used - For Oliver tractor model 1800, Replaces Oliver Casting number 106085A, 221020D, Our used bare blocks are inspected for cracks. This requires 7 to 10 working day lead time, Block may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 204878, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443837) $625.01

No
Picture
Crankshaft, Remanufactured, 221211 - For Oliver tractor model 1800 (Gas or Diesel with 1-3/4 thrust), Replaces Casting number 221211, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200611) $930.01

No
Picture
Cylinder Head, Remanufactured - For Oliver tractor model 1800 (Early Gas), Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200580) $710.01

No
Picture
Cylinder Head, Remanufactured - For Oliver tractor model 1800 (Late Gas), Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200581) $710.01

No
Picture
Cylinder Head, Remanufactured, 221502 - For Oliver tractor models 1650, 1750, 1800 (Diesel), Replaces Oliver Casting number 221502, Cylinders: 6, Casting No. 221502, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200577) $1325.01

No
Picture
Cylinder Head, Remanufactured, 221802 - For Oliver tractor models 1650, 1750, 1800 (Diesel), Replaces Oliver Casting number 221802, 157163A, Cylinders: 6, Casting No. 221802, 157163A, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200576) $1900.01

No
Picture
Cylinder Head, Remanufactured, 221902B-157081A - For Oliver tractor models 1650, 1800, Replaces Oliver Casting number 221902B-157081A, Engine 283D, Casting No. 221902B-157081A, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 204520) $1375.01

No
Picture
Cylinder Head, Remanufactured, 222202 - For Oliver tractor model 1800 (Gas), Replaces Oliver Casting number 222202, Cylinders: 6, Casting Number 222202, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205526) $1000.01

No
Picture
Cylinder Head, Remanufactured, 222302 - For Oliver tractor models 1800, 1900 (Gas), Replaces Oliver Casting number 222302, Cylinders: 6, Casting No. 222302, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205601) $1325.01

No
Picture
Cylinder Head, Used - For Oliver tractor model 1800 (Gas), Replaces Oliver Casting number 222202, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205526, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405526) $435.01

No
Picture
Cylinder Head with Valves, Remanufactured, 221902H-158792A - For Oliver tractor models 1650, 1800, Replaces Oliver Casting number 221902H-158792A, Engine 283D, Casting No. 221902H-158792A, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207042) $2325.01

No
Picture
Rear Coupler Sprocket, Used - For Oliver tractor models 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, Replaces Oliver OEM number 107416A, Splines: 27, For a new version of this item use Item #: 110748, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435507) $62.40

Valve Train Kit - For Oliver tractor models 1650 (with F283DB engine), 1750 (with F310DL engine), 1800 (C, with F310DL engine), 1800 (B, with F310DL engine), Fits Waukesha Engine (s) F283DL, F310DL, Fits CockShutt / CO OP tractor models 1650 (with F283DB engine) 1800C (with F310DL engine), 1800B (with F310DL engine), (Item #: 120343) $591.00

Engine Pistons and Sleeves

No
Picture
Sleeve and Piston Kit - 3 15/16 Overbore. For model 1800 Gas or LP. (Item #: R3467) $1146.80

No
Picture
Sleeve and Piston Kit - 3 7/8 Bore For 1800 (To S#124395) Diesel (Item #: R3961) $1031.46

No
Picture
Sleeve and Piston Kit - 3 7/8 Bore. For tractor models 1800 (From SN# 124396) Diesel. (Item #: R3464) $1206.85

Exhaust System

No
Picture
Exhaust Stack, Chrome, Curved - Double walled, 36 inches tall (not including base), 5 1/2 inch base, 2 15/16 inch inside diameter, 5 inch outside diameter. For tractor models (1650 diesel), 1655, 1750, 1755, 1800, 1850, (1855 gas). (Item #: 178570, Ref: R5903) $445.00

Gas Exhaust Manifold - Replaces OEM 155879A. For Gas Models 1750, 1755, 1800, 1850, 1955. Mounting gasket set is available as part number 101657. (Item #: 101656, Ref: R0165) $260.00

Manifold Gasket Set - Manifold Gasket Set. (Item #: 101657, Ref: R0165G) $63.44

Muffler, Vertical - With heat shield. Inlet I.D. 2-15/16", outlet O.D. 2-1/2", length is 34 inches. Replaces OEM# 104764A, 155980A, 164080A. For 1650 and 1655 diesel, plus 1750 and 1755 gas or diesel, 1800 and 1850 (Gas, LP and Diesel), 1855 gas. (Item #: 102685, Ref: R1100) $95.37

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Oliver and White models. Replaces: 157990A, 159088A, 162004A. (Item #: 121925, Ref: T23262) $6.30

Air Cleaner Pipe Grommet - For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 1955. Replaces 157767AS, 104151A. (Item #: 126387, Ref: 158086AS) $16.30

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Oliver and White tractors, it is used on the following carburetors: TSX49, TSX120, TSX138, TSX168, TSX181, TSX186, TSX221, TSX363, TSX374, TSX380, TSX384, TSX397, TSX399, TSX405, TSX418, TSX477, TSX581, TSX603, TSX610, TSX665, TSX738, TSX755, TSX791, TSX807, TSX811, TSX868, TSX880, TSX903, USX29, USX32, USX32-1. These carburetors are possible on the following models 2-44, 2-70, 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 900, 950, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, OC-4, OC-9, OC-12. Replaces 1H7610, H7610 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 1600, 1650, 1655, 1800 replaces Marvel-Schebler # TSX807, TSX868, TSXU838, TSXU1007. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100753, Ref: 14999) $520.00

Carburetor - Original Zenith Design w/ reversible linkage - Replaces Marvel Schebler numbers USX29, USX32, USX32-1, USX33, USX37, USX40, USX43, USX44 and Zenith number 13209. Note: If choke linkage rubs on block move to other side of carburetor or modify block to provide clearance. (Item #: 185695, Ref: R7939) $858.00

Carburetor Float - Use with Marvel Schebler Carbs: TSX168, TSX394, TSX396, TSX399, TSX477, TSX581, TSX807, TSX868, TSX880 For 99, 900, 1600, 1650, 1655, 1800, OC-12, White 2-70. (Item #: 108451, Ref: R4012) $30.90

Carburetor Float - Brass - This improved brass design float is used on Marvel Schebler Carburetors USX20, USX21, USX29, USX30, USX31, USX32, USX33, USX35, USX36, USX37, USX40, USX43, USX44, USX45, USX47, USX48, USX49. It replaces OEM numbers AR10106, R10221, 10P3196, 1566657A, 30-747 (Item #: 192721) $116.00

Carburetor Kit, Basic - Kit for Marvel TSX807, TSX880, TSX868, TSX168, TSX477, TSX394 carbs used on 1600, 1650, 1655, 1800, 900, 99. (Item #: 100735, Ref: MS103) $26.50

Carburetor Kit, Basic - Kit for Zenith 13750 carb used on 1750, 1755, 1800, 1850, 1855. (Item #: 100743, Ref: Z106) $36.00

Carburetor Kit, Basic - Used on Marvel Schebler USX29, USX32-1, USX37, USX44. Kit contains throttle shaft, float valve, float lever pin and gasket set. For tractor models 1750, 1800. (Item #: 121869, Ref: BK314) $38.50

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13750. For the following tractor models: 1750, 1755, 1800, 1850. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 205388, Ref: 1929-CARB) $370.01

Fuel Filler Grommett - (BLACK) 2 7/16" I.D. - 3 5/8" O.D.. Replaces Oliver OEM# 100619A and 72162460 and 30-3209865. For tractor models Super 55, Super 66, Super 77, Super 88 (DSLs) 550, 660, 770, 880, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2255. Replaces White OEM# 100619A and 72162460 and 30-3209865. For tractor models WHITE 2-78 and 4-78. (Item #: 113652, Ref: R4805) $20.00

Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Item #: 159728, Ref: 309991) $24.50

Fuel Filter, Primary - For tractor models 550, 770, 880, 990, 995, 1550, 1600, 1650, 1800, 1850, 1900, 1950. For tractors with the Roosa-Master injection system. (Item #: 126008, Ref: 156289AS) $13.40

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, Super 99, Super 44, Super 55, Super 66, 440, 550, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 2050, 2150. Replaces IJ5301 and IJA-5301. (Item #: 105382, Ref: 9N9162) $3.20

Precleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1855 gas only, 1900, 1950, White 2-70. Can replace Donaldson Bowl part number P02-0227. Replaces 101965A. (Item #: 157279, Ref: R28794) $7.80

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 1BS-5307A, 1J-5307 (Item #: 105364, Ref: 49923D) $3.30

Gauges

Fuel Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155558A. (Item #: 107692, Ref: S.53143) $31.10

Speedometer, Used - For Oliver tractor models 1800, 1900, Replaces Oliver OEM nos 155848A, 155848AA, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430524) $60.01

Tachometer Cable-38 Inches Long - For tractor models 1750, 1755, 1800, 1855, 1900, 1950, 1950T, 2050, 2150, 2255, White 2-105 (2WD). (Item #: 121695, Ref: 157566AS) $21.00

Temperature Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155557A, 30-3031659. (Item #: 110407, Ref: S.53142) $32.40

Water Temperature Sender - Fits Models: 550, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, White 4-150, White 2-44, White 2-62, White 2-78, White 4-78. Also replaces OEM #30-3032132, 101612A (Item #: 128314, Ref: D5NN10884A) $10.20

Hitch / Drawbar

Drawbar Roller - For tractor models 1750, 1755, 1800, (1850 SN# 150421 and up), (1855 SN# 220000 and up), 1870, 1900, (1950 SN# 150421 and up), (1950T SN# 194080 and up), (1955 SN# 220000 and up), (2050 SN# 204001 and up), White 2-105, White 2-110, White 2-150, (2150 SN# 204001 and up), (2255 SN# 235650 and up), 2270, White 2-85, White 2-88, White 4-150. (Item #: 112184, Ref: 104627A) $34.80

Drawbar Roller End Plate - For tractor models 1750, 1755, 1800, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, White 2-85, White 2-88, White 4-150, 2255. (Item #: 172771, Ref: 104629A) $23.50

Drawbar Roller Pin - For tractor models 1750, 1755, 1800, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, 2255, White 2-85, White 2-88, White 4-150. (Item #: 170289, Ref: 104628A) $40.80

Hydraulic System

Hydraulic Gear Pump, Main - For tractor models 1600, 1650, 1750, 1800, 1850, 1950, White 2-70. This pump is for open center system. Notice: If old pump has bolt-on cast iron suction discharge fitting with relief valve, this pump will not fit applications. (Item #: 104244, Ref: 303062449) $634.00

Hydraulic Power Drive Filter - Fits tractor models 1550, 1555, 1750, 1755, 1800, 1900, 1950T, 1955. Used as Trans Pressure Lube Filter on models 1650, 1655, 1750, 1755, 1800, 1900, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 4-150, White 4-175, White 4-180. Used as Reverse-O-Torc Filter on models White 2-62, White 2-78, White 4-78. Used as Over-under-Hydraulic Shift Filter on models: 1650, 1655, 1750, 1755, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 2-135, White 2-155, White 4-150. (Item #: 126304, Ref: 156513A) $8.40

Hydraulic Pump - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1950, 1950T, 2050, 2150 Replaces Oliver OEM number 30-3063062, , Compatible with White tractor models 16 Field Boss, 2-62, 2-70, 4-78, 170, 195, Replaces White OEM number 167683AS, White 2-62, 2-70, 2-78, 4-78, For open center system and external hydraulics, If old pump has bolt-on cast iron suction discharge fitting with external relief valve this pump will not fit, Splines: 11, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 113411) $871.80

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 105774A, 166407A, 30-3169898, 735606A (Item #: 111242, Ref: 28A116) $14.40

Headlight - Fender mounted. For tractor models 1600, 1800, 1900, 1550, 1650, 1750, 1850, 1950, 2050, 2150, 1555, 1655, 1755, 1855, 1955, 2255. (Item #: 105301, Ref: 164089AS) $34.00

Headlight - (12 Volt) Fender Mount. For model s:1650, 1655, 1800, 1850, 1900, 1950, White 2-78, White 4-78. (Item #: 113779, Ref: 105340AS) $38.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 80, 90, 99, Super 99, Super 44, Super 55, Super 66, 440, 500, 550, 900, 950, 990, 995, 1250, 1250A, 1255, 1265, 1355, 1365, 1450, 1465, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1865, 1870, 1900, 1950, 1950T, 1955, 2-105, 2-150, 2-80, 2-85, 2050, 2055, 2150, 2155, 2255, 2270, 2655, 4-105, 4-150, 4-180, 4-80, 4-85. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, 103463A, 607525A, 20-7302436, 31-2492920, 32-0006203. (Item #: 111241, Ref: 373662R91) $10.00

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Miscellaneous

No
Picture
Hydraulic Pump Drive Shaft Seal - For Oliver tractor models 1600, 1650, 1750, 1800, 1850, 1950 Replaces Oliver OEM number 303047059, , Compatible with White tractor models 2-70, Replaces White OEM number 303047059, Outside Diameter: 1.125", Shaft Diameter: 0.750", (Item #: 173773) $10.50

No
Picture
Tractor Canopy Headliner - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2055, 2150, 2155, 2255, Tractor Canopy use Item #: 162500, (Item #: 167695) $180.98

Oil System

Oil Filter - For tractor models 1650, 1655, (1750 diesel SN# 202441 to 203482), 1755, (1800 SN# up to 124396), 1850, 1855, (1950T SN# 194080 and up), (1955 SN# 220000 and up). (Item #: 111114, Ref: W156149AS) $23.00

Oil Filter Element - *** USE W156149AS *** For tractor models 1800 B&C, 1650D, 1655D, 1750 gas and diesel, 1755D, 1850 gas, 1855D, 1950T, 1955 with full flow. (Sock) (Item #: 111114, Ref: 156149AS) $23.00

Oil Pressure Switch - For tractor models 1550, 1555, 1600, 1800, 1900, White 2-44, White 2-62, 550, 770, 880. (Item #: 151008, Ref: 101613A) $13.90

PTO / Driveline

PTO Clutch Plate, Driven - For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. Replaces 105651A. (Item #: 111893, Ref: 159097A) $15.30

PTO Clutch Plate, Driven - 6.00 inch outside diameter, 4.255 inch inside diameter. For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. (Item #: 111892, Ref: 105650A) $181.00

No
Picture
PTO Drive Shaft - 67.125" long. For tractor models (1750 SN# 180537 to 190957), 1800, (1850 SN# 150421 to 194007), 1900, 1950. (Item #: 173446, Ref: 103897A) $536.00

Seats

Seat Back - Black, Steel. For model 660, 770, 880, 990, 1500, 1600, 1800 (Item #: 178451, Ref: R0872) $247.00

Seat Back - For 660, 750, 770, 880, 990, 1500, 1555, 1600, 1700, 1800, 1900, White 2-78, White 4-78. Seat Back is Black and White Vinyl on Steel. Bolt pattern two in center and one on each end. (Item #: 109261, Ref: R3977) $136.00

No
Picture
Seat Back - For 660, 750, 770, 880, 990, 1500, 1555, 1600, 1700, 1800, 1900, White 2-78, White 4-78. Seat Back is Green and White Vinyl on Wood. (Item #: 182156, Ref: R1005) $91.00

Seat Bottom - Black, Steel. For model 660, 770, 880, 990, 1500, 1600, 1800 (Item #: 178454, Ref: R0871) $286.00

Seat Bottom - For 660, 750, 770, 880, 990, 1500, 1555, 1600, 1700, 1800, 1900, White 2-78, White 4-78. Seat Bottom is Black and White Vinyl on Steel. (Item #: 109262, Ref: R3976) $172.00

Seat Bottom - For 660, 750, 770, 880, 990, 1500, 1555, 1600, 1700, 1800, 1900, White 2-78, White 4-78. Seat Bottom is Green and White Vinyl on Wood. Measures 20.5 x 16 inches. 2 Mounting tabs, 9 inches center-to-center. (Item #: 178626, Ref: R1004) $157.00

No
Picture
Seat Spring, Rubber - For tractor models: 1600, 1800, 1900. (Item #: 105322, Ref: 105875A) $48.00

Sheet Metal / Body Parts

Battery Box - For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-70. Battery box is base with back, tappered sides, and front lip. 2 of these boxes are used on some models. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104167, Ref: 108016A) $70.00

Battery Clamp Kit - This Kit includes Clamp, J-Bolts, and Nuts. Replaces 157011A, 108021A (Item #: 187376, Ref: 157011A) $28.50

Step and Handrail - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2055, 2150, 2155, 2255, Includes: 3 steps, extend-a-step, mounting bracket and handrail, Left Side Only, Durable powder coat finish, gray, 14.5" Wide, 6" Deep, (Item #: 164402) $517.00

Steering

Char-Lynn, Oliver Power Steering Conversion Kit - For Oliver tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1800, 1850, 1900, 1950, 2050, 2150, Used to convert Saginaw to Char-Lynn (5.9ci motor), Motor requires 4 gpm (minimum) to 8 gpm (maximum), Priority Flow Divider recommended to supply motor with 4 gpm (not included), Pump and hoses not included, (Item #: 111645) $1750.00

Jam Nut - For the following tractors: 100, 120, 125, 1355, 145, 1555, 1600, 1655, 170, 1750, 1755, 1800, 1850, 1855, 195, 1955, White 100, White 120, White 125, White 145, White 170, White 2-110, White 2-135, White 2-150, White 2-155, White 2-180, White 2-70, White 2-88, White 2-105 with serial number below 255216, White 2-85 with serial number below 263341. Replaces 72161733. (Item #: 105244, Ref: 192928M1) $9.00

Jam Nut - For Oliver tractor models 1355, 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955 Replaces Oliver OEM number 164370A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180, 100, 120, 125, 145, 170, 185, 195, Compatible with White Construction and industrial models 2-63, Replaces White OEM number 303117065, (Item #: 105244) $9.00

Power Steering Cylinder Link Arm - For tractor models (2255 SN# 235650), (1850 wheatland and IND. SN# 150421 and up), (1800, 1900 wheatland or IND.), (1950 wheatland and IND SN# 150421 or row crop SN# 157355 and up), (1750 wheatland SN# 180537 and up), (1950T wheatland SN# 194080 and up), (1755, 1855, 1955 all wheatland SN# 220000 and up). VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Item #: 105232, Ref: 157164A) $101.00

Rubber Dust Cover For Tilt Steering Wheel - The measurements on this Dust Cover are 2.498 inch outside diameter and 1.350 inches tall. Replaces 30-3346595, 30-3080080, 10A30798, 10A23441, 30A158, 70266946. Used on Oliver Tractors: 1800, 1855, 1900, 1955, 2155, 2255, 2655. Used on White Tractor: 2-70, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180 (s/n 301922-later), 4-180, 60 American, 80 American (Item #: 115580) $30.30

$Oliver 1800 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 16.250", B= 1.50", C= 1.625", D= 1.250". For tractor models 1550, 1555, 77, 770, 88, 880, (1600, 1655 SN# 147569 and up), (1850 SN# 150421 to 169758), (1750 SN# 180537 to 201090). Replaces KS713A, 161341A. The wheel bearing kit used on this spindle is kit part number WBKWH4. (Item #: 102697, Ref: 161340A) $268.00

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .640 inch, bottom tie rod hole is .750 inch. From center of splined hole to a line between the center of tie rod holes is 5.25 inches. For tractor models (1550, 1555, 1650 all with adjustable axles), (1600 with adj. axles SN# 124420 and up), (1655 adj axles narrow tread SN# 147569 and up), (1750 adj. axles narrow tread SN# 180537 and up), (1755, 1855 adj. axles marrow tread SN# 220000 and up), (1800 adj. axles SN# 115377 and up), (1850 adj. axles SN# 150421 to 168127), (White 2-62 with adj. axles SN# 160000 to 168915). (Item #: 105235, Ref: 107010A) $291.00

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .740 inch, bottom tie rod hole is .640 inch. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, (1850 regular tread SN# 168128 and up), 1855, 1950, 1950T, (1955 with 10 spline shaft). (Item #: 102715, Ref: 161424A) $355.00

Steering Arm, Center - This is the same as 161424A except tapered holes are drilled from opposite direction, .640" dia at top of hole and .740" dia at bottom of hole. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555, 1955 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T. (Item #: 102716, Ref: 161424SPL) $392.00

Steering Shaft - 9.160" long, 10 spline. For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, (White 2-62, White 2-78, White 4-78 all industrial). Replaces 155800A, 107009A. (Item #: 105229, Ref: 303110311) $175.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Wheel - 18" diameter, 13/16"-7/8" keyed, 3 covered steel spokes. For tractor models Super 55, (70 late), 77, Super 77, 88, Super 88, 550, 660, 770, 880, (1600, 1650, 1800 with manual steering). (Item #: 101468, Ref: HB767C) $51.00

Steering Wheel Cap - Black Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101472, Ref: 101431AA) $46.10

Steering Wheel Cap - Black Face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150 (Item #: 101474, Ref: 101432AA) $41.30

Steering Wheel Cap - White Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101471, Ref: 101431A) $41.64

Steering Wheel Cap - White face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Item #: 101473, Ref: 101432A) $39.30

Steering Wheel, Keyed Hub - 3 spoke (covered). 18" diameter, 7/8" - 13/16" tapered shaft. For tractor models Super 55, 550, Super 66, 66, 660, (late 70 SN# 243686 and up), 77, 770, late 80, 88, 880, Super 77, Super 88, 1550 Rowcrop, 1555 Rowcrop, White 2-62, 1600, 1650 and 1800 (with manual steering), 99 and Super 99 (replaces 4 spoke wheel with 3 spoke). (Item #: 101468, Ref: 1B767C) $51.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Super 55, Super 66, Super 77, Super 88, Super 99, 1555, 1600, 1650, 1750, 1850, 1800, 1900, 550, 60, 70, 80, 66, 660, 77, 770, 88, 880, 90, 950, 99, 990, and 995. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 915090, 72162485, and S170. (Item #: 157780, Ref: 353435X1) $1.00

Tie Rod Assembly - For tractor models 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955, White 2-70, (White 2-105 SN# 255216 TO 271913), (White 2-85 SN# 263341 TO 271719), 1650. Replaces 662201. (Item #: 102700, Ref: 164210AS) $65.00

Tie Rod, Long - A= 18.625", B= .750". For tractor models 1550, 1555, 1650, 1655, 1800, 1900, White 2-62, White 2-78, White 4-78, 770, 880. (Item #: 108172, Ref: 106673AS) $62.00

Tie Rod, Short - A= 3.50", 11/16" diameter, 18 RH thread. For tractor models 1550, 1555, 1650, 1655, 1755, (1800 row crop SN# 90525 to 115376 and wheatland SN# 90525 and up), 1855, (1900 wheatland SN# 90525 and up), 1955, White 2-62, White 2-78, White 4-78, (60 row crop SN# 600001 and up), (770, 880 row crop). Replaces KS1160. (Item #: 108171, Ref: 107291AS) $25.90

Wheels

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $118.00

Front Wheel Hub - For tractor models G750, 1650, 1655, White 2-78, White 2-85, White 4-78, (1850 regular/narrow adj. tread), (1750 with adj. narrow tread), (1550, 1555, White 2-62 all with short wheel base), (1800 with 4W adj. tread), (White 2-44, 550 all with fixed tread front axle SN# 121808 and up). (Item #: 105223, Ref: 155193A) $73.00

Front Wheel Hub, 6 Bolt - Outer bearing cup 2.326" O.D. check dimensions before ordering hub. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, White 2-62, White 2-78, 77, 770, 88, 880, Super 55, White 2-44, White 2-4412, White 2-4413L, White 2-4414, White 2-446. (Item #: 102713, Ref: 155192A) $204.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 100094A, T14752. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.70

Wheel Bolt - This wheel bolt fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 550, 60, 66, 660, 70, 88, 880, 1550, 1555, 1600, 1650, 1655, 1755, 1800, 1850, 1855, 1900, 1950T, 1955, 2050, 2150, 2255, 77, 770, 2-62, 2-105, 2-110, 2-135, 2-150, 2-155, 2-70, 2-78, 2-85, and 2-88. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number: 1H706A. (Item #: 108605, Ref: WB916) $2.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Oliver Shield Decal - 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Item #: 178286, Ref: R5239) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Item #: 179436, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Switch - Used on models with 6 volt manual starters. Replaces B7392A (Item #: 105684, Ref: 9N11450A) $9.90

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Item #: 109511, Ref: 782979) $22.00

$Oliver 1800 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Oliver 1800 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.78

$Oliver 1800 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Oliver 1800 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Oliver 1800 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Oliver 1800 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Oliver 1800 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Carburetor Elbow and Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

$Oliver 1800 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF2-25 filter assembly. (Item #: 159754, Ref: 1A9253) $43.40

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Cockshutt Red, 1 Quart - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108385, Ref: TP185QT) $29.80

No
Picture
Paint, Cockshutt Red, Spray Can - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108018, Ref: TP185SP) $9.60

No
Picture
Paint, Cockshutt Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP175GAL) $112.00

No
Picture
Paint, Cockshutt Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP175QT) $46.20

No
Picture
Paint, Cockshutt Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP175SP) $9.10

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Grey Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Med. Green, 1 Gallon - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102964, Ref: TP221GAL) $62.00

No
Picture
Paint, Med. Green, 1 Quart - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102963, Ref: TP221QT) $23.40

No
Picture
Paint, Med. Green, Spray Can - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102962, Ref: TP221SP) $8.80

No
Picture
Paint, Oliver Yellow, 1 Gallon - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108392, Ref: TP224GAL) $112.00

No
Picture
Paint, Oliver Yellow, 1 Quart - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108391, Ref: TP224QT) $46.20

No
Picture
Paint, Oliver Yellow, Spray Can - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108390, Ref: TP224SP) $9.10

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.40

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056) $2161.57

Tie-on Seat Cover - Green and Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179515, Ref: R2603) $53.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.20

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 100014A, 30-3040003 (Item #: 103768, Ref: FW60166) $92.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00