FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers C Parts

Category: Clutch

[Categories] [All C Parts] [All Allis Chalmers Models]

Clutch Disc, 8.5 Inch - SOLID, spline diameter 1.125 inch, 10 spline. For tractor models B, B125, B15, C, CA, IB. (Item #: 189706, Ref: 70226729) $88.00

Clutch Disc, 8.5 Inch - New Spring Loaded Disc is 10 spline with 1.125 inch diameter. (Item #: 130148, Ref: 70226730) $97.00

Clutch Disc, 9 Inch - This clutch disc has 1-1/8 hub, 10 spline. For tractor models B, C, CA, (D10 up to serial number 3500), (D12 up to serial number 3000), D14, D15. This is not interchangeable with A44512 as the hub is different. (Item #: 172922, Ref: 70232239) $121.00

Clutch Disc, 9 inch Organic - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Replaces 207784 and 70207784. For models B, C, CA, D10, D12, D14, D15, H3, HD3, I400, I600 and IB. This part is not interchangeable with 70232239 as the hubs are different. (Item #: 119397, Ref: A44512) $60.00

Clutch Disc, Remanufactured, 70207784 - For Allis Chalmers tractor models B, C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70207784, 70230099, 70231976, 70232239, 70236105, 70236120, 70236122, 70247744, 70253187, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204569) $133.00

Clutch Disc, Remanufactured, 70214320 - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70214320, 70226729, 70226730, Clutch Size: 8-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206299) $87.00

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Item #: 126139, Ref: 208465) $20.00

Clutch Kit - This new single clutch kit contains a 8 1/3 inch pressure plate assembly (70226262), a 8 1/2 inch spring loaded, woven disc with a 10 spline, 1 1/8 inch hub (70226730), and new release bearings (70204829 and 70235079). For Tractors B, C, CA. (Item #: 182995, Ref: 70226262K) $400.00

Clutch Kit - Kit includes 9 inch clutch disc (10 spline 1 1/8 inch hub) 70207784, pressure plate 70216965, release bearing 70235079, alignment tool and pilot bearing 6203-2RS. Used on B, C, CA, D10, D12, D14, HD3 Crawler, HD4 Crawler. (Item #: 119875, Ref: 1612-1008) $165.00

Clutch Kit, Remanufactured - For Allis Chalmers tractor models B, C, CA, Clutch Diameter - 8-1/2", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 8-1/2', Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, (Item #: 202029) $247.20

Clutch Pedal Return Spring - This Clutch Pedal Return Spring fits Allis Chalmers B (serial number 101 to 124037), C, CA (Up to serial number 30611), IB (up to serial number 2836). It replaces original part numbers 207941, 225646, 70207941 and 70225646. This Clutch Pedal Return Spring measures 4.300 inches overall length. The body diameter measures 0.750 inch and the wire diameter measures 0.100 inch. (Item #: 126165, Ref: 70225646) $19.40

Clutch Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: B, IB, C, CA, D10 (up to serial number 3501), D12 (up to serial number 3001), D14, D15, and H3. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref: 364527R91) $9.30

Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482) $19.10

Pressure Plate Assembly, Remanufactured, 70216965 - For Allis Chalmers tractor models B (s/n B-7133-earlier), C, CA, D10 (s/n 3501 - earlier), D12 (s/n 3001 - earlier), D14, D15, Compatible with Allis Chalmers Construction and industrial models HD3, Replaces Allis Chalmers OEM number 70216965, 70228926, 70247745, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 118719, (Item #: 206372) $117.00

Pressure Plate, 8.5 Inch - New Pressure Plate. For tractor models B, B125, B15, C, CA, IB. (Item #: 166220, Ref: 70226262) $197.00

Pressure Plate, 9 Inch - Rockford Style. For tractor models B, C, CA, D10 serial number less than 3501, D12 serial number less than 3001, WF. (Item #: 118719, Ref: 70228926) $93.00

Pressure Plate, Remanufactured, 70216805 - For Allis Chalmers tractor models B, C, CA, Replaces Allis Chalmers OEM number 70216805, 70226262, Pressure Plate Size: 8-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, (Item #: 204490) $114.01

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref: 361292R91) $25.70

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087) $21.00

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All C Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy