FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 544 Parts

Category: Clutch

[Categories] [All 544 Parts] [All Farmall Models]

Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $6.90

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $27.10

No
Picture
Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $44.50

$Farmall 544 Clutch Alignment Tool - 1-3\32 inchx10 and 1-11\16 inchx16 Spline$
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.10

Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $21.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 300, 350, 460, 544, 606, 656, 664, 666, 686, 2544, 2606, 2656, Contents: 1-832375 Release Bearing, 1-836304 Pilot Bearing, 1-363514 IPTO Seals, 1-2385243 IPTO Bearing Cage O-Ring and 252556 IPTO Bearing Cage O-Ring, (Item #: 108786) $81.00

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $128.00

Clutch Disc - For International / Farmall tractor models 504 (Farmall Gas or Diesel, /60-12/68), 504 (Gas or Diesel, /60-12/68), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 560 (Farmall Gas or Diesel, 1/58-12/63), 560 (Gas or Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 660 (Gas or Diesel, 1/59-12/63), 664 (Diesel, 1/72-12/73), 666 (Gear Drive, 1/72-12/72), 686 (Gear Drive, 1/69-12/71), 2504, 2544 (Diesel), 2606 (Diesel, 1/61-12/67), 2656 (1/63-12/71), Replaces International OEM number 375701, 1-1/2", 6 Spline, (Item #: 166109) $122.00

Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $96.00

Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2404, 2544, 2606, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 384633R91, 384633R91R, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205053) $175.50

Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, 3616, Replaces International OEM number 384633R91, 384633R91R, H384633, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205990) $95.00

$Farmall 544 Clutch Kit, 10-1\2 Inch$
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60

Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01

PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $62.00

Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50

Pressure Plate Assembly, Remanufactured, 360746-R - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360746-R, 376360R1, 376360R94, 376360R94R, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, (Item #: 204409) $112.00

Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01

T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.10

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 544 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy