Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

AC B Magneto

Welcome Guest, Log in or Register
Author 
Andrew Z

04-25-2005 13:19:18




Report to Moderator

I know that this topic has been beat to death but I hate to ask another question on this but,, I have a question about timing on my 38 B. I got the mag rebuilt and turned out that I had the wrong Mag in the first place. However the mag that was on it did run it. Thus this threw off the timing gear that comes in contact with the cam shaft gear. I tried to see marks but was unable to on the cam gear after remving the front mag gear cover. How do I re align this so that the gear is in the proper spot?? Thanks for the help !!!!!
Andrew

[Log in to Reply]   [No Email]
Keith-OR

04-25-2005 23:20:28




Report to Moderator
 Re: AC B Magneto in reply to Andrew Z, 04-25-2005 13:19:18  
here is a website that should help.
Keith



[Log in to Reply]  [No Email]
steve(ill)

04-25-2005 20:05:09




Report to Moderator
 Re: AC B Magneto in reply to Andrew Z, 04-25-2005 13:19:18  
look several posts down at the bottom of this page about april 23. Rod had a long discussin going on how to time a mag inside and out.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy