Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Case 400 and 730-Plowing?

Welcome Guest, Log in or Register
Author 
Ron

11-17-1999 21:03:52




Report to Moderator

I have a 400 and 730, both which have the aftermarket catagory 2 three point hitches. I hooked a three bottom plow to the 730 and never did get it adjusted to where it would plow right. I figured the hitch had too much play and moved around too much. I am considering buying and 2 bottom plow for the 400. Can these hitches be adjusted to where they will actually plow. Anybody with any experience with them, please let me know. Thanks.

[Log in to Reply]   [No Email]
Jerrie Lott

11-18-1999 19:28:28




Report to Moderator
 Re: Case 400 and 730-Plowing? in reply to Ron, 11-17-1999 21:03:52  
I don't think that you need to buy a two bottom plow for the 400, we always pulled three bottoms with our DC and I think a 400 has close to 10 more horsepower than a DC, it shouldn't be but just a couple less hp than the 730



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy