TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Case Tractors Discussion Forum

I'm Starting A SP-12 Case Combine Registry

Welcome Guest, Log in or Register

Author

1206SWMO

12-10-2006 16:26:16

Report to Moderator

I'm guessing that there are less than 100 SP-12 Case combines still left yet in the U.S. and Canada.5020 guy from Montana over on the combine forum owns a SP-12 and says there are over 100 of them left yet.A steak dinner could be riding on this if my friendly wager is accepted.

If you know of a SP-12 Case combine we need the serial number,a picture,and the exact or general location if at all possible.So everyone try and help prove me wrong by adding a combine to the registry.Thanks.This could be alot of fun and will maybe help save a few more old combines.

[Log in to Reply] [No Email]

Dave Olson

12-15-2006 17:46:23

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

Here is another try with a picture.

Dave Olson - East-Central Illinois

[Log in to Reply] [No Email]

John Saeli

12-12-2006 05:37:23

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

Ted's correct, we've got close to 10 unloading tubes, plus tons & tons of combine parts. New sieves, new complete strawracks.. & the list goes on.

[Log in to Reply] [No Email]

Tom Stanley

12-20-2006 17:57:53

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to John Saeli, 12-12-2006 05:37:23

hey john what do you get for a unloading auger tube? think we can ship one and get it here without being bent????? ???

[Log in to Reply] [No Email]

1206SWMO

12-20-2006 18:22:52

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to Tom Stanley , 12-20-2006 17:57:53

Tom,I take it that you have a SP-12.Do you have a serial # for the registry?My email is open.

[Log in to Reply] [No Email]

Tom Stanley

12-20-2006 18:58:35

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-20-2006 18:22:52

you bet SP-12 5667828 this sp was a custom cutter's unit we traded for it in 1967 sold the guy a repo'd 1010 then sold this to a local fella haden't seen it since till a friend was cleaning up an old farmstead and ask if I wanted it of coarse I did. have about 20 other case combines if you need any more info Tom

[Log in to Reply] [No Email]

1206SWMO

12-23-2006 11:39:41

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to Tom Stanley, 12-20-2006 18:58:35

Thanks for the info Tom.I see you are from Gillette,WY.We spent the night there about 15 years ago.

Sounds like you have a nice collection of Case combines.You will have to join us over at the combine forum.

[Log in to Reply] [No Email]

Dave Olson

12-11-2006 16:50:19

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

Is this the type of Combine your looking for? I was visiting family friends last year and they had this combine in there barn.

Dave Olson - East-Central Illinois

[Log in to Reply] [No Email]

1206SWMO

12-11-2006 22:34:30

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to Dave Olson, 12-11-2006 16:50:19

Dave,your picture didnt show.Email it to me thru ytmag.Thanks.

[Log in to Reply] [No Email]

Camboted

12-11-2006 01:36:40

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

Hey! If there are that many SP-12's John Saeli has about 10 NOS unloading augers for them. He bought out a dealer.

I had an SP-12 bought from an estate in Texas, but the hauling got so high I just let it sit. it may still be there. If anyone is interested they can contact me. fmi@online.com.kh

[Log in to Reply] [No Email]

1206SWMO

12-11-2006 06:45:23

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to Camboted, 12-11-2006 01:36:40

Everyone, Thanks for the replies so far.Sounds like theres a good source for new SP-12 unloading augers.

Camboted, Was that SP-12 on an estate near Plainview,Texas?My search on here located #5476576 that was on an estate there in 2004.If thats the one thats a long haul even for me at 25 cents per mile for fuel.I've been in Plainview before.

[Log in to Reply] [No Email]

Camboted

12-11-2006 01:36:26

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

Hey! If there are that many SP-12's John Saeli has about 10 NOS unloading augers for them. He bought out a dealer.

I had an SP-12 bought from an estate in Texas, but the hauling got so high I just let it sit. it may still be there. If anyone is interested they can contact me. fmi@online.com.kh

[Log in to Reply] [No Email]

combinekid

12-10-2006 21:09:22

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

I know of two that are dirictly across the road from my house. They are on the same farm that I got my LA from. One is junk as it appears like it was involved in a roll over. The other one is compleate other then the engine which I have. The owner let me have the engine when he gave me the LA. If someone would want the combines I'm pretty confident that you could have them for hauling them away. Or maybe for a small fee. At one point I had the serial #s written down off both of them but I'f I cant find that I could easily run over their sometime this week and get them. The combines are in southeast WA near Pasco.

[Log in to Reply] [No Email]

1206SWMO

12-11-2006 06:38:04

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to combinekid, 12-10-2006 21:09:22

Combinekid, Last night I searched the archives on here and found the serial number of one of those combines by you.It was #5668512.If you could get the serial number of the other SP-12 by you and possibly some pictures it would be much appreciated.Thanks.

I figured that there might be some SP-12 Cases in the Oregon,Washington,Idaho area.

We were thru your area in July 2001.Spent the night at Walla Walla and ate breakfast in the Tri Cities while on our way to Vancouver,B.C.One of my good friends that I currently work with spent 25 years in your area working at the Hanford nuculear site.

[Log in to Reply] [No Email]

combinekid

12-11-2006 18:18:30

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-11-2006 06:38:04

yep I belive I could run over cross the road some time this week and get that other serial # for you. I could also even take some pics. If you know anybody intested in the engine from the combine, like I said I have it and would be intrested in selling it. I have pics of it all ready on the computer so let me know if intersted. I know one combine is spike tooth and the other is a rasp bar cyl. One has like about a 8 or 10 foot head and the other one is like a 13 14 or something like that. The one thats been rolled was obvously used for parts for the other one as its missing several things. Anyways I'll try and get those numbers and a few pics.

[Log in to Reply] [No Email]

Tom Railsback

12-12-2006 07:11:52

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to combinekid, 12-11-2006 18:18:30

I'd be interested in the engine as I have an early (not 3 speed though) D I'd like to restore. You can call me at (406) 454-8748. I'm not so far away that I couldn't come pick it up.

[Log in to Reply] [No Email]

1206SWMO

12-11-2006 22:39:09

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to combinekid, 12-11-2006 18:18:30

Thanks for the help..The small one may be a SP-9 as they had 9 ft heads.SP-12's had 12 ft heads.Let me know which one is for parts only.Tell me which one I already have the serial # for.Sure hope that you can get some pictures.

[Log in to Reply] [No Email]

combinekid

12-13-2006 22:21:04

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-11-2006 22:39:09

Hey I got those serial #s and a few pics for you. The good (if you want to call it that) combine number is SP12 5668512. The parts machine does not say sp 12 sp 9 or any model designation on its serial tag. All it has is a serial number which is a follows 5666400. Both machines are on a piece of ground across the road from my house. The owner told me that they were there (along with a bunch of other old iron and junk when he bought the place. Just last year he obtained water for the ground so he cleared the sagebrush, leveled sand knobs, installed a center pivot meaning much of the stuff was in the way. He hauled most all of it off to the scrap except for the big stuff. And the LA which he gave to me. The combines got drug to the edge of the field. I had thought that the header for the parts combine was still there but its gone, so it must have went to the scrap. If you would like more info and the pics drop me an e-mail and I'll send them to you. Good luck on your combine huntin!

[Log in to Reply] [No Email]

Tom Railsback

12-10-2006 17:07:41

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

I told JD 5020 guy I knew of a couple and told him to call me for more info.

[Log in to Reply] [No Email]

biltex

12-10-2006 16:58:51

Report to Moderator

Re: I'm Starting A SP-12 Case Combine Registry in reply to 1206SWMO, 12-10-2006 16:26:16

I know of one in central Texas that belongs to a dealer's estate. It is on private prortery so it would require getting permission to get the SN. Itis close enough to the road to get a picture, if that would help.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy