|
Hey Case Folks, Just wanted to follow up with some useful(?) info on my 1030's broken PTO. My 1030 was supplied stock with a 21 spline 1000 rpm PTO shaft. I am going to "convert" it down to a 540 rpm PTO shaft. I found a great Case IH dealer close by me in North Branch, NJ. Here's what I need to complete the job;
(1) pinion gear p/n A32407 ($165),
(1) pinion gear p/n A32420 ($261),
(1) 540 PTO shaft p/n A64592 ($258)
(1) gasket p/n 1342351C1 ($13). All parts are still new from Case IH and/or new from non-Case aftermarket supply, which means they bought NOS inventory directly from Case. Case IH still supplies the original parts, service and operators manuals too. That's just under $700 to do this job, 1/6 what I paid for the entire tractor a few years back, and it's a little rich for me. Does anyone out there have these parts in good shape and willing to part with them? I don't want some crusty old rusted junk out of a "parts" tractor that's been in the weather for umpteen years. I'll pay a fair price for decent equipment.
| 
