TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

350c clutch adjustment?

Welcome Guest, Log in or Register

Author

JTL in illinois

08-28-2002 20:54:34

Report to Moderator

Is there a way to ajust the forward and reverse shuttle shift, after the machine has been running for an hour its hesitant to move. If I push the clutch in and release then it catches and then moves ok. I'm just tired of always using the foot clutch. I dont have a technical manual so any help would be great. By the way I'm running deere hydrualic oul in all the hydraulics as well as the tranny, is this ok?

[Log in to Reply] [No Email]

09-03-2002 13:28:10

Report to Moderator

Re: 350c clutch adjustment? in reply to JTL in illinois, 08-28-2002 20:54:34

I called my JD Dealer, and they want $75 for the same book I have.
I will take $50 plus shipping. Dont know yet what shipping would be yet. Let me know if your interested.
BZ

[Log in to Reply] [No Email]

JTL

09-03-2002 18:28:13

Report to Moderator

Re: Re: 350c clutch adjustment? in reply to BZ, 09-03-2002 13:28:10

Hey bZ, left you a message but is one page 1 thanks

[Log in to Reply] [No Email]

JTL

09-03-2002 18:26:23

Report to Moderator

Re: Re: 350c clutch adjustment? in reply to BZ, 09-03-2002 13:28:10

I live at 8301 Baldwin Rd. Sparta, Il, 62286.

If the shipping is less than $10.00 and the book is in good shape I'd be interested, Let me know your address and I'll get you a check. thanks-Jeff Luthy

[Log in to Reply] [No Email]

09-01-2002 16:51:21

Report to Moderator

Re: 350c clutch adjustment? in reply to JTL in illinois, 08-28-2002 20:54:34

I want to be fair to you, but also would like to get a fair price for it. If you want to check with your JD Dealer, and I will with mine, I will beat it. The number on it is a TM-1115 (Nov-86).
It is very thick, a good 2 inches thick, and goes over everything. The specs, every componet on what to look for, and how to fix it. I will make a call Tuesday.
BZ

[Log in to Reply] [No Email]

08-30-2002 18:14:34

Report to Moderator

Re: 350c clutch adjustment? in reply to JTL in illinois, 08-28-2002 20:54:34

Find out how much they are wanting for a Manual, and I will beat their price. I have a TM (technical manual) for the 350C, 350D Crawler Bulldozer, 350C,355D Crawler Loader all in one. It is very thick and full of all the information you could need. BZ

[Log in to Reply] [No Email]

JTL

09-01-2002 13:27:59

Report to Moderator

Re: Re: 350c clutch adjustment? in reply to BZ, 08-30-2002 18:14:34

How much do you want for it BZ?

[Log in to Reply] [No Email]

Tim [ga]

08-30-2002 06:11:16

Report to Moderator

Re: 350c clutch adjustment? in reply to JTL in illinois, 08-28-2002 20:54:34

Yes you need the service msnual. The most likely cause is oil leakage inside the reverser, either at the hydraulic pump or at the hooh rings on the reverser clutch packs.

[Log in to Reply] [No Email]

gatractorman

08-29-2002 03:09:03

Report to Moderator

Re: 350c clutch adjustment? in reply to JTL in illinois, 08-28-2002 20:54:34

If I remember correctly the C series is the same as the older 350 machines in that it doesn't have a regular clutch setup like the 450's, all the clutch pedal does is moves a spool and drops pump pressure so the reverser wont pull, you could have a pressure problem or how about the clutch pedal, is the return spring hooked up on it and keeping the pedal pulled up, if you can gain access to a manual it will tell you how to check and adjust pressure you may consider purchasing one as it has alot of invaluable info inside.

[Log in to Reply] [No Email]

JTL

08-29-2002 18:30:07

Report to Moderator

Re: Re: 350c clutch adjustment? in reply to gatractorman, 08-29-2002 03:09:03

thanks gatractorman, spring is good, and I guess I'll buy a manual, where can I get one.

[Log in to Reply] [No Email]

gatractorman

08-30-2002 03:04:15

Report to Moderator

Re: Re: Re: 350c clutch adjustment? in reply to JTL, 08-29-2002 18:30:07

Well the dealer would be able to get one, but it's gonna be expensive like mabye $300 for a service manual but dont worry you will get your money out of it many times over, you might hop over to Ebay and see if by chance one is up for auction there, or mabye some of the other guys here will know somewhere else to get one.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy