TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall M Travel Speed

Welcome Guest, Log in or Register

Author

mccrerer

03-25-2007 15:32:39

Report to Moderator

Can anyone tell me what the standard travel speed for the Farmall was in each of its 5 gears?

[Log in to Reply] [No Email]

Henry E

03-26-2007 08:16:34

Report to Moderator

Re: Farmall M Travel Speed in reply to mccrerer, 03-25-2007 15:32:39

Those are the book va;ues for speed on the roads. However, that changes slightly with different sixe tires. If im not mistaken, GuyFay lists those speeds with 11 " tires, ( now 12.8) but I have clocked mine several times at 18.2 MPH with 15,5 tires on a marked mile course nearby

[Log in to Reply] [No Email]

ejr-IA.

03-25-2007 15:39:00

Report to Moderator

Re: Farmall M Travel Speed in reply to mccrerer, 03-25-2007 15:32:39

This is from the Nebraska state tests 25/8,31/2,41/4,51/8,163/8

[Log in to Reply] [No Email]

Gary- The Rookie Pharmer

03-25-2007 17:28:16

Report to Moderator

Re: Farmall M Travel Speed in reply to ejr-IA., 03-25-2007 15:39:00

I'm not sure I understand that reply. I think that the OP wanted to hear MPH

[Log in to Reply] [No Email]

City-Boy McCoy

03-25-2007 18:16:48

Report to Moderator

Re: Farmall M Travel Speed in reply to Gary- The Rookie Pharmer, 03-25-2007 17:28:16

I think that is the answers in miles per hour as I see it - isn't it? mike

[Log in to Reply] [No Email]

Gary- The Rookie Pharmer

03-25-2007 18:34:17

Report to Moderator

Re: Farmall M Travel Speed in reply to City-Boy McCoy, 03-25-2007 18:16:48

25/8,31/2,41/4,51/8,163/8 ----- ----- ----- ---
25 mph in 8th gear? 163mph in the other 8th gear?

[Log in to Reply] [No Email]

Ed Topel

03-25-2007 18:40:45

Report to Moderator

Re: Farmall M Travel Speed in reply to Gary- The Rookie Pharmer, 03-25-2007 18:34:17

Let's put a few spaces in there- 2 5/8 mph in 1st, 3 1/2 mph in 2nd, 4 1/4 mph in 3rd, 5 1/8 mph in 4th, and 16 3/8 in 5th. Make sense now?

[Log in to Reply] [No Email]

Gary- The Rookie Pharmer

04-04-2007 15:29:29

Report to Moderator

Re: Farmall M Travel Speed in reply to Ed Topel, 03-25-2007 18:40:45

I get it now. Thanks for clearing it up.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy