TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

C oil filter number

Welcome Guest, Log in or Register

Author

Gary_N_WV

07-31-2003 10:04:15

Report to Moderator

I'm trying to compose a list of parts/supplies I need to get for my "C" for the day when I start assembling the engine.(113cid)
I searched the archives for a post on oil filters but can't seem to find a part#
I'm not real confident in the local auto store's counter guy's ability to look up things for "older machines". I'd rather know what I'm looking for when I go in the door.

Would someone that knows or has a filter cross reference list give me some info.

I tried to look at the old filter and it wasn't a name I'd ever heard of nor could I find any kind of number on it.

While I'm asking questions, what is a substitute for IH Hy Tran for the hydraulics?

I have an owner's manual but it isn't any help.....guess I need to order another book.

Thanks !

[Log in to Reply] [No Email]

DANWV

07-31-2003 20:19:31

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

Gary the part number that I have in my C parts manual for the element(s) are
63855D for the umbrella type and 355009R91 for the radial fin type and
the part number for the filter case gasket is 13728D
hope this helps.
DANWV

[Log in to Reply] [No Email]

Gary_N_WV

07-31-2003 18:52:11

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

Yeah...I guess you guys are right...a 90 mile trip through the mountains to a local Case/IH dealer for an oil filter "ain't bad" if it prevents me from using some "off brand" like NAPA or WIX or something.

West Virginia isn't exactly the home of Case/International.....as a matter of fact, I don't think it's home to much of anything----smile---

Actually, there use to be several different tractor dealers around, but since this isn't really "farm country" where I live, they have have all left.....along with all the little Mom and Pop stores, corner barber shops, etc.

[Log in to Reply] [No Email]

Ken

08-02-2003 17:46:53

Report to Moderator

Re: Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 18:52:11

Sounds like my kind of place.

[Log in to Reply] [No Email]

RAS

07-31-2003 15:45:43

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

Oil filter 376374R91 $4.35. Why would want to find a substitute for Hy Tran?

[Log in to Reply] [No Email]

Farmer John

07-31-2003 13:15:17

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

I stand amazed at the folks who spend all the time and effort to bring their old iron into a usable state and then buy cheap filters, points, plugs, etc. Go to your local CIH dealer and buy the correct parts. For the most part, these guys know more about these old tractors than we could ever dream of learning. Most folks don't mind going to their dealer to ask questions but go to the discount stores for parts...Common guys.....

[Log in to Reply] [No Email]

Gary_N_WV

07-31-2003 18:29:17

Report to Moderator

Re: Re: C oil filter number in reply to Farmer John, 07-31-2003 13:15:17

I would go to a local IH/Case dealer....if I had one !

[Log in to Reply] [No Email]

wvhogleg

08-01-2003 06:04:24

Report to Moderator

Re: Re: Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 18:29:17

hey there gary. what part of the state do you live in?

[Log in to Reply] [No Email]

JimS

07-31-2003 13:11:56

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

Just bought one for my C.
I use Wix filter #51172

[Log in to Reply] [No Email]

Chet Glenn

07-31-2003 10:53:43

Report to Moderator

Re: C oil filter number in reply to Gary_N_WV, 07-31-2003 10:04:15

I don't remember the number but NAPA carries the filter, they look it up by the engine, which is a Continental 113. 30 weight nondetergent motor oil works well in the touch control hyd system.

[Log in to Reply] [No Email]

jal-SD

07-31-2003 11:31:52

Report to Moderator

Re: Re: C oil filter number in reply to Chet Glenn, 07-31-2003 10:53:43

A's, B's C's & Super A's (except for the last few Super A's) all have C-113 engines, they are IH's own engines, not Continentals. (IH did use a Continental in its 350 diesels, though.) Filter is the same one for all, as well as the the C-123's & H's with the short filter. The Fram # is C-135, if you don't like Frams, you can cross reference it. BTW, I've been using Frams for years, w/o any problems. (My $0.02 worth. jal-SD)

[Log in to Reply] [No Email]

scotty

07-31-2003 11:48:56

Report to Moderator

Re: Re: Re: C oil filter number in reply to jal-SD, 07-31-2003 11:31:52

jal SD, The Super A had the shorter filter than the A. The bell canister had to be shorter because of the hydraulic lines running over the top of oil filter. My 42 A has the longer filter and my 48 Super A had the shorter filter. Your NAPA dealer should carry both filters.
scotty

[Log in to Reply] [No Email]

07-31-2003 14:56:03

Report to Moderator

Re: Re: Re: Re: C oil filter number in reply to scotty, 07-31-2003 11:48:56

Close. Later A's had the same filter as the Super A, etc. I don't know when they changed, maybe in 1944-45?

There are some things I insist on being "genuine" IH and some things it doesn't matter to me. I think filters probably fall into the "don't care" category, though most of the time I end up with genuine filters. If Fram, Baldwin, Wix or whoever didn't make a good filter, you'd have heard about them going out of business long before now. When we re-did my Super A, we used almost exclusively parts from NAPA--sleeve sets, bearings, etc. Most of the brand names ended up being Perfect Circle. The quality was just as good and IH, and when you price a Fire Crater sleeve and piston kit from IH, it's easy to justify "off brand" stuff!

My $.02
Al

[Log in to Reply] [No Email]

Gary_N_WV

07-31-2003 11:46:59

Report to Moderator

Re: Re: Re: C oil filter number in reply to jal-SD, 07-31-2003 11:31:52

Thanks jal-SD,
that'll give me some place to start.....
I found some places on the net to cross reference, but you had to have a filter number to start with to cross to other makers.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy