Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Hugh,

Welcome Guest, Log in or Register
Author 
STEVEN H

09-24-2003 21:22:35




Report to Moderator

I am applogiesing for this post that i made you you that every one inclueding your self took as an insult to yourself. (Well every one except me, cause i have yet to see where i made a remark that could be taken offencively)http://www.ytmag.com/farmall/messages/383153.html That post was made in responce to this post made by you that i took offence to that no one else seen as an offence to me.
Link
The part of that i took as offence is as follows here " you described junk and were quoted junk prices by three people" now i see clearly where you called my tractor junk, but no one else has seen that. i have been wrong more times than i will care to admit to. this is a time that i dont think that i was wrong, but every one else has. i am sorry for haveing insulted you, i have always respected you and your advice that you have given me from time to time. i was only trying to point out to you why my tractor was not junk, but that got twisted into an ugly mess.

[Log in to Reply]   [No Email]
Jcnc

09-25-2003 09:41:53




Report to Moderator
 Re: Hugh, in reply to STEVEN H, 09-24-2003 21:22:35  
Steven, it takes a big person to apologize, whether right or wrong. I hope everything turns out well, and that you enjoy your tractor. Who cares about the definition of "junk".



[Log in to Reply]  [No Email]
STEVEN H

09-25-2003 13:19:20




Report to Moderator
 Re: Re: Hugh, in reply to Jcnc, 09-25-2003 09:41:53  
Well i have taken insult to haveing my H that i have worked on, drove and made a liveing off of, haveing that tractor called junk. Now i more than likely over reacted. But i sure did not need the comments from than guy. Who first in one post with one name told me it was junk and junk has no value. And Than in a post direcly above it with a different name, tryed to pretend to be someone that was interested in my tractor and was wanting to buy it. That set me off and was most unwelcome. Now i realiz that you not haveing any idea what has gone on between that person and i you would be unable to know just what kind of an insult he was makeing to me. I hope that most is clear to you. As i am most unsure why it was thought that i made insult to hugh. I do see where in the post "WHAT DID I GIVE YOU ALL TO MUCH INFO". The title along can be seen as offensive. I am sorry for makeing that post as that came out of anger. I have seen many times here where some one will ask the value of there tractor and there will be two maybe three posts. The posts all state a wide price range and say that with out more info that is the best they can do. I have given a great discripion of my tractor but that post had not a single anwser to it. As i was makeing the above mentioned post the fellow also above mentioned made the first post to that. And it was that i had junk and junk has no value. As a further note it realy got my goat when some lady called me a animal abuser and a wife beater. I am neither and was less than pleased to be called either.

[Log in to Reply]  [No Email]
Hugh MacKay again

09-25-2003 04:36:11




Report to Moderator
 Re: Hugh, in reply to STEVEN H, 09-24-2003 21:22:35  
Steven: Before you write that e mail give it some thought, I suggest you read every item on all threads, in detail first.



[Log in to Reply]  [No Email]
Hugh MacKay

09-25-2003 03:37:55




Report to Moderator
 Re: Hugh, in reply to STEVEN H, 09-24-2003 21:22:35  
Steven: Would you kindly send me a personal e mail. I sence you are encountering some difficulties that run much deeper than the status of your tractor. I don't know how I can help other than to offer you some words of wisdom from my 61 years at the school of hard knocks. I assure you everything you tell me will be kept strictly confidential. Don't expect a responce before evening as I will be away all day.

To you and everyone else involved in this discussion, or thinking of getting involved, I think it's time to bring it to a halt. What is going on here is serving no useful purpose in helping anyone and isn't that what we are all about. HELPING EACH OTHER GET THE MOST OUT OF OUR OLD IRON, whether it be enjoyment, commercial use, parting them out, pulling, etc.

[Log in to Reply]  [No Email]
STEVEN H

09-25-2003 07:20:24




Report to Moderator
 Re: Re: Hugh, in reply to Hugh MacKay, 09-25-2003 03:37:55  
I might not be able to get to that till tonight or tomorow, but i will email you.



[Log in to Reply]  [No Email]
Hugh MacKay

09-25-2003 14:19:38




Report to Moderator
 Re: Re: Re: Hugh, in reply to STEVEN H, 09-25-2003 07:20:24  
Steven: No rush you just do it when you have time. Hugh



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy