Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall Super-A Hydraulic Rebuild

Welcome Guest, Log in or Register
Author 
Kevin in Va.

07-01-2004 05:17:07




Report to Moderator

Does anyone know of a good source for a rebuild kit for the Hydraulic unit and pump for the Super-A? Thanks in advance for any help.




[Log in to Reply]   [No Email]
TonyG

07-01-2004 14:07:43




Report to Moderator
 Re: Farmall Super-A Hydraulic Rebuild in reply to Kevin in Va., 07-01-2004 05:17:07  
Kevin,

I don't know where you are in virginia, but just across the maryland line, over the 301 bridge, and up a bit is;

Hugh C. Gardner, IV Hugh C. Gardiner, Inc. Since 1927 PO Box 127 Faulkner, Md 20632 (301) 934-2841 (301) 870-3813 (301) 934-4519 (Fax) email: hugh3@erols.com

He's a kabota dealer that used to be a farmall dealer and still deals all the parts and does repairs. They have quite a good stock, and can usually get things pretty quick. I've dealt with them many times and its always been a good experience. You can even email them, and they will mail things to you - no problem.

Hope this helps,
T.

[Log in to Reply]  [No Email]
Stan(VA).

07-01-2004 15:35:05




Report to Moderator
 Re: Re: Farmall Super-A Hydraulic Rebuild in reply to TonyG, 07-01-2004 14:07:43  
Kevin,
Don't know where you're at, but Browning Equip in Purcelville and Cavalier IH in Ashland are both fairly good dealers.
Stan(VA).



[Log in to Reply]  [No Email]
scotty

07-01-2004 05:40:49




Report to Moderator
 Re: Farmall Super-A Hydraulic Rebuild in reply to Kevin in Va., 07-01-2004 05:17:07  
Kevin, You can buy the complete rebuild kit from your Case-IH dealer for about $90. If your dealer doesnt stock it I will be happy to give you my dealers name and phone #.

scotty



[Log in to Reply]  [No Email]
Don Swindall

07-01-2004 13:28:26




Report to Moderator
 Re: Re: Farmall Super-A Hydraulic Rebuild in reply to scotty, 07-01-2004 05:40:49  
I rebuilt the pump on my 100. I had to buy the parts from a dealer. For the Hydraulic box I bought a kit for it which included O-rings and a gasket. It cost 150.00. I took the o-rings to a O-Ring distributor and bought enough to rebuild it 6 times for about 12.00. You might pull the o-rings off and get them matched up. A lot cheaper.
Good Luck.



[Log in to Reply]  [No Email]
Kevin in Va.

07-01-2004 06:02:12




Report to Moderator
 Re: Re: Farmall Super-A Hydraulic Rebuild in reply to scotty, 07-01-2004 05:40:49  
Thanks, for the speedy reply. Will see if I can locate one in my area.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy