TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

OK Allen, time for an update.

Welcome Guest, Log in or Register

Author

Sloroll

03-31-2005 10:01:41

Report to Moderator

Didju get it yet Huh? Huh??

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 11:56:56

Report to Moderator

Re: OK Allen, time for an update. in reply to Sloroll, 03-31-2005 10:01:41

Okay By Golly,

It has taken me 22 years and 8 days to do it, but I've finally got my Cyclo back! :>)

Allan

third party image

[Log in to Reply] [No Email]

migraine

03-31-2005 20:53:04

Report to Moderator

Re: OK Allen, time for an update. in reply to Allan in NE, 03-31-2005 11:56:56

That's pretty neat Allan. I've never run a 3 pt set up before but the first planting I ever did was with a 400 model pull type on 38 inch rows. Course dad would pull in the markers to make the odd rows about 28 inch so that made rotery hoeing and cultivating a real challlenge. Wish I had 1000 acres near you so you could get some time on the 966 and the cyclo. Enjoy the ride. Migraine

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 21:06:44

Report to Moderator

Re: OK Allen, time for an update. in reply to migraine, 03-31-2005 20:53:04

Oh, we'll get 'er.

Just not gonna run out and buy some akaline junk just because some ol' boy went broke tryin' to make it work and nothin' would grow. :>(

Just like everything else, ya know. I'm too darned picky. :>)

But, I'm having the time of my life since we decided to do this. Goals in life are a good thing.

Allan

[Log in to Reply] [No Email]

John A

03-31-2005 19:57:43

Report to Moderator

Re: OK Allen, time for an update. in reply to Allan in NE, 03-31-2005 11:56:56

Allan Now that is a darlin too. Very nice planter. That is like the one I learned on. Did you get the little momitor too? Our ol 400 had acra openers on it. Keep new wear edges on it on it and it will do fine.. Our 900 had double disk openers on it after 3 seasons od corn planting the disk had enough wear that problems started arising. bearings and mudding up inbetween the disk..Just my observation. Actually I think I liked the Acra-openers better, as far as trouble free operaation. though the disk openers made a sharper V to place the seed in, at least while new.
Later,
John A.

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 20:13:36

Report to Moderator

Re: OK Allen, time for an update. in reply to John A, 03-31-2005 19:57:43

Hi John,

Well, this afternoon I get to looking this thing over and that is what is has on it; the Acra gizmos. It has been completely changed over; caught me off-gaurd there for awhile. Didn't know what I had bought.

These shoes were just coming on the market while I was busy going broke. Were supposed to be the latest and the greatest at that time.

They are all nice and sharp and the hopper still has treatment from last years seed.

Dunno, we'll see what develops. Thought for a minute there when Curt was unloading the thing that I was gonna havta buy a bunch of discs. Maybe not.

Gotta locate a 72 drop drum someplace now.

Allan

[Log in to Reply] [No Email]

caseyc

03-31-2005 12:04:26

Report to Moderator

Re: OK Allen, time for an update. in reply to Allan in NE, 03-31-2005 11:56:56

i see green!!!!! !!!!! !

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 12:14:20

Report to Moderator

Re: OK Allen, time for an update. in reply to caseyc, 03-31-2005 12:04:26

Hi Buddy!

That shall be fixed, ol' Pard. Promise ya that.

Not too wild about the fact that it doesn't have the disc openers like my old one did, but Curt bought it right and it won't take long for me to change out those shoes in a hurry too.

Allan

[Log in to Reply] [No Email]

caseyc

03-31-2005 10:50:33

Report to Moderator

Re: OK Allen, time for an update. in reply to Sloroll, 03-31-2005 10:01:41

i must not have been paying attention lately, allen's getting a cyclo planter is he???? i just picked up a nice 400 myself.

casey in SD

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 10:20:05

Report to Moderator

Re: OK Allen, time for an update. in reply to Sloroll, 03-31-2005 10:01:41

Hi Bill,

Snowed 4" here last night; and now is is melting like crazy! Mud everywhere and knee deep.

Colorado Curt should be here within 30 minutes with that darned Cyclo and I'm concerned how we're gonna unload that big, bulky gizmo in the mud.

So, haven't given the old 9 much thought this morning. Should be done, tho I would think. :>)

Allan

[Log in to Reply] [No Email]

Sloroll

03-31-2005 10:38:21

Report to Moderator

Re: OK Allen, time for an update. in reply to Allan in NE, 03-31-2005 10:20:05

Well it looked to me that if he backed from the house towards the highway it should slide right off :? ) I'm excited for you. Hope it all fall into place with out a hitch.

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 11:53:03

Report to Moderator

Re: OK Allen, time for an update. in reply to Sloroll, 03-31-2005 10:38:21

I'm tellin' ya, that Curt from Colorado is one smart puppy make no mistake about it! No wonder he is an engineer by trade.

He used these darned, Gawd-forsaken hills to his advantage; got clear up at the top of poverty hill here, put 'er in reverse and rolled back down til he was going at about 35mph.

Then, he stood on the brakes. She came right offia there, no problem! And here all this time I was worried about the mud. :>)

Allan

[Log in to Reply] [No Email]

Sloroll

03-31-2005 12:26:26

Report to Moderator

Re: OK Allen, time for an update. in reply to Allan in NE, 03-31-2005 11:53:03

Glad you gotter Allen, you made my day!

[Log in to Reply] [No Email]

Harley

03-31-2005 16:01:59

Report to Moderator

Re: OK Allen, time for an update. in reply to Sloroll, 03-31-2005 12:26:26

Now Allan, ifn that was me, I would find that 22 year ago banker, invite him out, or send him a picture if he ain"t close, and tell the so-and-so, "Ya ain"t gittin this one (Explitive deleted). But I have a hard time forgeting things. Looks great, Harley

[Log in to Reply] [No Email]

Allan in NE

03-31-2005 16:55:55

Report to Moderator

Re: OK Allen, time for an update. in reply to Harley, 03-31-2005 16:01:59

Hi Harley,

Aw heck. I'm over that; he was just doing his job and protectin' his own backside.

But boy, is it ever nice to have this gizmo back! Lots of work to do to it tho. :>(

Allan

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy