TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Tractor for Allan

Welcome Guest, Log in or Register

Author

HarleyFarmall

08-01-2005 18:46:35

Report to Moderator

Here ya go buddy. The first in a series of mid-range tractors for ya and on the way out. Me and Rusty should be there before the snow flies. Seeyaby, HarleyFarmall

[Log in to Reply] [No Email]

Colorado Curt

08-02-2005 07:52:41

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 18:46:35

Do you want to borrow mine? It has a wide front now and new rear tires. I could also loan you a 2-point model 314 roll over plow.

[Log in to Reply] [No Email]

old

08-01-2005 20:24:57

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 18:46:35

Shoot allen I have a good running H you could buy and I know it has never been at a pull.

[Log in to Reply] [No Email]

HarleyFarmall

08-01-2005 18:47:39

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 18:46:35

Spose it would help if i'd post the picture, huh

[Log in to Reply] [No Email]

Allan in NE

08-01-2005 19:37:44

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 18:47:39

Can ya promise me that it has never been within 35 miles of a danged tactor pull? :>)

Allan

[Log in to Reply] [No Email]

RustyHarley

08-01-2005 18:52:03

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 18:47:39

Here's another one, we can get two on the two trucks, that way we're both loaded, RustyHarley

[Log in to Reply] [No Email]

Allan in NE

08-01-2005 19:41:20

Report to Moderator

Re: Tractor for Allan in reply to RustyHarley, 08-01-2005 18:52:03

Darned Harley is tryin' to throw in those fairground cuties into the deal, but here's one that a feller could get a little attached to if it only had a front end under it.

It looks a little gassey too, don't it? :>(

Before you two get too darned wound up in this little Farmall-peddling venture, I think I'm gonna have to start a "Farmall Appreciation" school fer you guys or somptin'. :>)

Allan

[Log in to Reply] [No Email]

RustedHarley

08-01-2005 18:56:44

Report to Moderator

Re: Tractor for Allan in reply to RustyHarley, 08-01-2005 18:52:03

So where do we need to go and get these tractors? They are for sale I assume?

[Log in to Reply] [No Email]

HarleyFarmall

08-01-2005 19:16:36

Report to Moderator

Re: Tractor for Allan in reply to RustedHarley, 08-01-2005 18:56:44

Yep they are for sale, and that's the beauty of it. They are scattered all over the U.S. so we will be loaded most of the way, so we can't lose. Besides that, Akmed just got ahold of me and he says he has some ver fine deal for most important onest peoples willing to investment some money to him for bying good American trackters. Ifn we pick them all up, well can't go wrong, HarleyFarmall

[Log in to Reply] [No Email]

Andy Martin

08-02-2005 06:48:40

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 19:16:36

Are you still able to keep the prices at $49,000?

If so, I may want a couple.

[Log in to Reply] [No Email]

HarleyFarmall

08-01-2005 19:19:07

Report to Moderator

Re: Tractor for Allan in reply to HarleyFarmall, 08-01-2005 19:16:36

I gotta go to bed now. Mother thinks if I got this much time to waste, I need to put it to good use, night all, HarleyFarmall

[Log in to Reply] [No Email]

Loren

08-01-2005 20:57:50

Report to Moderator

Since Allan's movin a bit slow..... in reply to HarleyFarmall, 08-01-2005 19:19:07

I'll put dibs on a wide legged job. :>) Course you'll have to do more travellin than you expected. Western Ore. But I have hay on the ground so it'll need to be here by Wed. LOL Loren.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy