Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

engine oil pump torque

Welcome Guest, Log in or Register
Author 
jcarter

11-13-2005 06:17:41




Report to Moderator

What do I torque the oilpump bolts down to on a SW4 please.I've seen 40 for rods and70 for head bolts in a search. That sound OK?




[Log in to Reply]   [No Email]
El Toro

11-13-2005 08:06:19




Report to Moderator
 Re: engine oil pump torque in reply to jcarter, 11-13-2005 06:17:41  
I would agree with Jon on the torque. If you know the bolt size and thread I have a torque chart for bolts. That's for grade 5 and grade 8.
Hal



[Log in to Reply]  [No Email]
MagMan

11-13-2005 07:59:55




Report to Moderator
 Re: engine oil pump torque in reply to jcarter, 11-13-2005 06:17:41  
When I just did the H I just snugged them up> I suppose like 35 to 40 would not hurt they were a pretty stought bolt on the H pump. JON



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy