TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

super a rims

Welcome Guest, Log in or Register

Author

alannpa

01-05-2006 12:06:13

Report to Moderator

Has anyone used the super a rims from Classic Ag? Any pitfalls?

[Log in to Reply] [No Email]

mark in wa

01-05-2006 21:03:09

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

I have just purchased a set of rear rims from an online source. Will let you know how they work when I get them in. Good thought to test fit them before mounting tires.

[Log in to Reply] [No Email]

gene bender

01-05-2006 18:29:46

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

What rims are you looking for front or rear? I have some and they are original. You cannot find original unless they are front without the loops.

[Log in to Reply] [No Email]

dhs

01-05-2006 18:06:21

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

I have a complete set, front and rear that I will sell. Send me an email if you are interested.

[Log in to Reply] [No Email]

klf

01-05-2006 15:35:05

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

Are you talking about front or rear rims?

[Log in to Reply] [No Email]

Hugh MacKay

01-05-2006 14:34:20

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

alann: I talked with a local supplier of new parts for older tractors. He had just got a new shipment of rims that he said obviously came from a different factory than they had been coming from.

He had sold one set of 28" rims for one of the popular Utility type tractors. The guy he sold them to had to grind about 1/16" off his hubs to mount them. He wished the guy had brought them back for a refund. I was looking that day for a new set of rims for my 130. He had them in stock, but said he wouldn't sell them until he found if they mount right. His argument, if it didn't fit it wasn't a replacment rim.

I suggested it my not be as much fun grinding 1/16" off that cast hub of the 130. The pressed steel hub would grind off quite easily. The point is once you grind a 1/16" off your hub, then a properly engineered rim will never stay tight. He asked me to hold off as he wasn't going sell rims that weren't up to specs. Watch that one guys, his customer didn't notice until he had new tires on the rims.

[Log in to Reply] [No Email]

alannpa

01-05-2006 15:36:02

Report to Moderator

Re: super a rims in reply to Hugh MacKay, 01-05-2006 14:34:20

This is the part that scares me a bit. These are for my son-in-law, and he needs all new. The only local parts we have is Tractor Supply. Probably the same situation. Very few parts places are going to care as much as your service center.

[Log in to Reply] [No Email]

farmallhal

01-05-2006 13:12:57

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

Saw some new aftermarket front rims with welded tabs instead of the original riveted factory lugs which were labeled as "made in Turkey". Don't know anything specific about Classic Ag as haven't heard of them here in south central Missouri. Just wanted to point out the possibility that they might not look original if that is important. Hope this helps, Hal

[Log in to Reply] [No Email]

Nat 2

01-05-2006 12:51:51

Report to Moderator

Re: super a rims in reply to alannpa, 01-05-2006 12:06:13

I would presume that they're no different than most of the other aftermarket brands, since they're all made in the same factory, probably in China.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy