Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

What monstrousity of a loader is this?

Welcome Guest, Log in or Register
Author 
JayWalt

11-16-2006 21:41:02




Report to Moderator

Check this H out...[Log in to Reply]   [No Email]
Hugh MacKay

11-17-2006 16:26:55




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Jay: Like some of the others I was unable to bring up your photo. however if it's the same loader Allan is showing, those were a very good loader. They would break more load out of a manure pile than anything IH built for 15 years after that. My dad bought one of those on a new H in 1951, used to run as many as 5 manure spreaders from it. He quite often went out doing commercial truck loading with that loader on the H.

In my opinion IH never built a loader that would match the old 30-31 loaders for work done in a day until they came with new 2000 and 2001 loaders in the 60s. That 33 and 34 were nice enough loaders but they wouldn't lift or break out that heavy load. I'd be willing to bet there are more 30-31 in use today than 33-34 loaders.

[Log in to Reply]  [No Email]
2farmron

11-17-2006 12:39:03




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Allen (or anyone),

I"ve got a loader like that one and I"ve been trying to find good forks for it. The folks at the Case dealer don"t know what I"m talking about. Have any idea where I can get some forks?

Thanks

Ron



[Log in to Reply]  [No Email]
chuck46

11-17-2006 08:30:55




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Hi, This was the best loader there was at the time. My dad had one on his 42 H, every spring he loaded manure for most everyone in the neighborhood. It can lift more than most any you will find. All that work and there is not a weld mark or crack anywhere to this day. The tines are unbendable. Notice the bucket return springs, they were very handy. There is also a pin and roller on each side of the trip latch, with 3 positions for bucket angle. It also fit just as well on an M.

[Log in to Reply]  [No Email]
George G

11-17-2006 08:15:10




Report to Moderator
 Loaders before hydraulics in reply to JayWalt, 11-16-2006 21:41:02  
third party image

Tractors had loaders before they had hydraulics.



[Log in to Reply]  [No Email]
Nat 2

11-17-2006 06:06:33




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
That's pretty typical for loader technology back then. Designers were basing new designs on old designs, partly because of their myopic view of engineering, and IMHO because the bean counters thought farmers feared change.



[Log in to Reply]  [No Email]
Brian in NY

11-17-2006 06:00:03




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Yep, have a Farmall H photo archive book that shows a McCormick Loader very similar to this. This is a nice original compliment to an H or M.
We always call those small buckets manure buckets.



[Log in to Reply]  [No Email]
Bill In New Brunswick

11-17-2006 03:48:56




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Allen
My Loader is identical to the one in your picture. I need to do some work to it as it raises crooked. But I hope to plow snow this winter.
ttfn
Bill



[Log in to Reply]  [No Email]
JayWalt

11-17-2006 06:31:44




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to Bill In New Brunswick, 11-17-2006 03:48:56  
I think you'll have issues plowing snow with such a narrow bucket. I got a 40" on mine atm, and my 300u is 68" wide, looking for at least a 5 foot bucket for it.



[Log in to Reply]  [No Email]
STEVE SIMON

12-04-2006 09:10:54




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-17-2006 06:31:44  
ARE YOU THE ONE WHO HAD AN AD FOR THE BUCKET IN THE FINDLAY WHIRLPOOL NEWS LETTER? I HAVE A 4' X 2' NOT ON MY TRACTOR BECAUSE MINE HAS NO POWER STEERING AND I WOULD LIKE TO GET RID OF THE BUCKET. ALSO DO YOU HAVE A SPARE FRONT BOLSTER? I SAW ANOTHER MESSAGE ABOUT SPARK PLUGS. TSC ON THE EAST END OF FINDLAY HAS THEM ON THE SHELF.



[Log in to Reply]  [No Email]
bill in New Brunswick

11-17-2006 06:49:17




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-17-2006 06:31:44  
Nah, I dont have the narrow bucket. I have a snow blade that is wider than the rear tires. Im not sure how it will work but it would have to be better than shoveling.



[Log in to Reply]  [No Email]
Allan In NE

11-17-2006 03:12:07




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to JayWalt, 11-16-2006 21:41:02  
Jay,

Gotta remember that back around 1950, almost every blessed thing was done by hand. Grain, potatoes, sugar beets, manure, seed; everything was moved by human muscle.

Loaders/hydraulics/elevators/augers were just starting to show up on farms and guys did whatever they had to do to get off the end of that damned scoop shovel or spud fork.

Pretty sure your example is a farm/local-built converted hay sweep made into somewhat of a "loader".

No, it isn't pretty, but it probably saved some ol' boy a heck of a lot of work in it's day.

Allan

third party image

[Log in to Reply]  [No Email]
Don L C

11-17-2006 07:06:29




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to Allan In NE, 11-17-2006 03:12:07  
Back in the late '40s we had a loder something like that on our M ....it had lifting legs on each side to break the load loose....it was easer on the tractor...we used it for loading gravel and manure .....



[Log in to Reply]  [No Email]
RustyFarmall

11-17-2006 04:55:49




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to Allan In NE, 11-17-2006 03:12:07  
That is a McCormick #30 loader. The #30 and the #31 are probably one of the toughest loaders ever built. I have a #31 on one of my Hs. It will lift way more than what it is rated for.



[Log in to Reply]  [No Email]
Dick Davis

11-17-2006 04:32:29




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to Allan In NE, 11-17-2006 03:12:07  
I'm confused. Jay I couldn't open your page. Allen did you copy Jay's picture and post it? Or did you just post a IHC 35 loader picture? Too early in AM to malke sense to me. Dick



[Log in to Reply]  [No Email]
NoahW

11-17-2006 04:40:52




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to Dick Davis, 11-17-2006 04:32:29  
Got the same one on an H. Takes some gettin' used to if you haven't ever used a trip bucket. Ain't sure where I heard it, but it was said the narrow scoop was designed for cleaning out stalls in big barns.



[Log in to Reply]  [No Email]
a_lead

11-17-2006 08:24:18




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to NoahW, 11-17-2006 04:40:52  
Gotta add my 2 cents worth: Allen, looks like yours is missing the forks on the front edge. I remember them having tines (forks) on the front to clean packed bedding out of pens. Then there was 2 different "scoops" that slide over the tines: 1 same width as yours in the pic, the other one wider for a "snow" bucket. And yes Allen, I agree that no matter how ugly it looks, if it meant not using the business end of a pitch fork, it was great!

[Log in to Reply]  [No Email]
LA in Wi.

11-17-2006 09:01:45




Report to Moderator
 Re: What monstrousity of a loader is this? in reply to a_lead, 11-17-2006 08:24:18  
Yes, that is an IH loader alright. Dad had one on his H (my H now)in Iowa. The narrow bucket was the "manure bucket" and the wide one (wider than rear tires) was the "snow bucket". I have photos showing the H wearing a "Heat Houser" and Dad moving snow in the late 1950s. As long as the motor was reved up and the fan was blowing warm air back, it was nice and comfy on that seat.

For several years after WWII most farmers were still using pitch forks to load spreaders. Three uncles of mine bought the first loader in the neighborhood and put it on an H. In those days farmers all had a few dairy cows and they would clean the barn daily by using a wheel barrow and push it out a door and dump it...best was if there was a slightly elevated ramp made of boards so you could pile the manure higher. This was commonly called a "manure pile". About late April it was time to haul the manure to the fields; nobody hauled manure in winter with NF tractors thru the snow Iowa got in those days. The first day the H was used it was comical...the H just sat there and spun the wheels in the slippery manure so tire chains had to be purchased. One uncle was a JD man and it was fun to watch him try to run that H and loader.

We'd haul with 3 spreaders to keep the loader busy. One day I was driving an AC WC on a spreader, stopped to get off and open a gate (our overshoes were always wet and muddy and slippery), my foot slipped off the clutch before I got it in neutral and the WC opened the gate for me. I forgot the WC had hand brakes so the gate was flattened.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy