Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

dimensions ih 400 series engine

Welcome Guest, Log in or Register
Author 
boerontour

12-30-2006 03:25:48




Report to Moderator

hello, i"am looking for the dimensions from the inter 414, 436 and 466 engines, most importand is bore x stroke, but also the dimensions from the pistons and what ever, please can any one send this to me ore give me a site where evrything is put on.




[Log in to Reply]   [No Email]
Hugh MacKay

12-30-2006 13:30:46




Report to Moderator
 Re: dimensions ih 400 series engine in reply to boerontour, 12-30-2006 03:25:48  
They all have the same bore, it's been a few years thus I cant tell you the exact figure. The stroke is 4.75 in the 414, 5 in the 436 and 5.25 in the 466. It's the same block for all, crank and rods are different, possibly piston as well.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy