TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Governor Trivia Question.

Welcome Guest, Log in or Register

Author

tmonton

11-19-2007 13:55:53

Report to Moderator

I am attaching an image from the governor linkage on my Super H Stage-II. Here is my issue.

My linkage ( broken ) is on the right side with the spring still attached.

As you can see the one on the left, an ordinary H or M linkage arm, is quite a bit different than the right side. I have tried both the H and the M governor with no luck.

I cannot read the actual part number on the linkage arm to help myself out either.

I am wondering now, is this the same one that is used in the 300 number series ? There is still only 2 weights on the clutch like normal ... not 4.

[Log in to Reply] [No Email]

ejr-IA

11-19-2007 18:49:03

Report to Moderator

Re: Governor Trivia Question. in reply to tmonton, 11-19-2007 13:55:53

H and 300 have the same part no. 6676DB

[Log in to Reply] [No Email]

tmonton

11-19-2007 17:03:04

Report to Moderator

Re: Governor Trivia Question. in reply to tmonton, 11-19-2007 13:55:53

I do have a part number on the governor housing.

6634DD 7

It looks the same as all the other governors I've seen. I would rather replace a broken arm than the entire governor.

[Log in to Reply] [No Email]

D Slater

11-19-2007 16:27:02

Report to Moderator

Re: Governor Trivia Question. in reply to tmonton, 11-19-2007 13:55:53

Arm and spring is aftermarket, never saw one like that before in a power governor, not like any tompson, rocket or M&W power governor I have seen. Some power governors only had 2 weights. Early M&W did also. Sometimes the weights will have letters and numbers on them to get a idea of who made them.

[Log in to Reply] [No Email]

Willie R Adkins

11-19-2007 15:09:32

Report to Moderator

Re: Governor Trivia Question. in reply to tmonton, 11-19-2007 13:55:53

their is some differences will the spring lever mount if so you may have to synchronize the govenor to carburetor linkage don't really know just taking a stabb at it good luck also is their any tractor salvage yards where you are at that could look at another one to help out.

[Log in to Reply] [No Email]

ChrisAS

11-19-2007 14:28:04

Report to Moderator

Re: Governor Trivia Question. in reply to tmonton, 11-19-2007 13:55:53

I worked on a lot of H,M SH,SM,300,350,400,450 never saw one with pins in it like the one you show. Don't remember what the M&W gov. had, never did like them anyway. The gov only had to weights.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy