Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

OIL Fill Location

Welcome Guest, Log in or Register
Author 
IHKARIE

12-03-2007 12:24:17




Report to Moderator

I just inherited an old M from the previous owners of my property. I have looked all over and I cannot seem to find where the oil gets put in at. HELP Please.




[Log in to Reply]   [No Email]
Janicholson

12-03-2007 12:47:07




Report to Moderator
 Re: OIL Fill Location in reply to IHKARIE, 12-03-2007 12:24:17  
At the front right side of the engine (in front of the distributor) there is a large diameter cast iron cap with two cast wings on the top. with an adjustable wrench, gently turn this CCW looking down at it.
The fill is to the top petcock in the oil pan. when it comes out there, it is full. If it will not come out the bottom, it needs a quart. (of course it is necessary to open them to check level) JimN

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy