TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Seat bushings for M

Welcome Guest, Log in or Register

Author

moonlite 37

01-16-2008 15:41:46

Report to Moderator

I have an M with the long shock absorber on the seat. It looks like the seat bushings are worn out. I took the two cap screws out but have not tried very hard to get the pin out. Looks like it may be a bit difficult. Can I find parts? Do I need a press for remove and replace?

[Log in to Reply] [No Email]

GordoSD

01-17-2008 07:51:57

Report to Moderator

Re: Seat bushings for M in reply to moonlite 37, 01-16-2008 15:41:46

I found a large box full of shock grommets and bushings, assorted parts at my local body shop and alignment shop. They gave me a pail full. I put a couple on a proper size rod and chucked them in the press, filed and sanded them to proper contour. Voila, 'new bushings, shiny and no cracks' for free. You don't need to worry about the sleeve, bolt, pin condition as the shock really pivots and rides on the rubber. Soak them in PS fluid before install.

Gordo

[Log in to Reply] [No Email]

S/C BOB

01-17-2008 04:22:41

Report to Moderator

Re: Seat bushings for M in reply to moonlite 37, 01-16-2008 15:41:46

I replaced mine with bushings from an old shock from a car,tightened up the seat very well..

[Log in to Reply] [No Email]

georgeky

01-16-2008 21:59:39

Report to Moderator

Re: Seat bushings for M in reply to moonlite 37, 01-16-2008 15:41:46

I ain't ever got any for 75 cents. OEM has them for about 20 bucks. This includes both bushings and a new pin.

1-800-283-2122

Or you can try Marshall's tractor parts at 1-888-824-0544.

[Log in to Reply] [No Email]

Johnny D

01-16-2008 18:45:06

Report to Moderator

Re: Seat bushings for M in reply to moonlite 37, 01-16-2008 15:41:46

Replaced the very same thing on my C. Getting the pin can be a little challenging if the M is like the C and the new ones might take another extra hand to help compress the new bushings in. You may find a washer type spacer or two in there as well. Any Case/IH dealer should have them and they cost around .75 each round here.

[Log in to Reply] [No Email]

CNKS

01-16-2008 17:13:48

Report to Moderator

Re: Seat bushings for M in reply to moonlite 37, 01-16-2008 15:41:46

Parts are available from Case-IH and OEM Tractor Parts, and many others. I think you can just pound the pin out. If you have a press it will probably be easier. Probably held in by what remains of the grommets.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy