Super A 3 point hitch - Think I am done. For now...

I have been slowly working on this for at least the past 3 and a half months when I had the time. I think I am done for now. I managed to use some pieces I got from a used Worksaver setup and fabricate the rest.

I might have to modify it, guess time will tell, but for now it looks like I am ready to try it out.

I would like to thank Hugh for all of his help along the way - Thanks Hugh.

Now I need to save up some money for a rear blade. I was looking at the woods RB72 which has the tilt feature, not sure if that is too much blade for the tractor though.

scotty

Yea, that"s my Electra Glide hiding out under the sheets - I have all sorts of toys and little time to play, but I never have a lack of stuff to do.

Thanks again for keeping me on track Hugh, I will look at the plans, it didn"t look quite right, but then again I am not sure what right is. I wasn"t sure if they had to be tight or not, that is why I bolted them, I guess they can have a little movement on the pins then since the non threaded section is wider then the ball on the link?

Hugh, I did some thinking about my last post and I will go to the tractor store, most likely I have the wrong length pins in there for the bottom link, I think they sell ones with a shorter non-threaded section.