Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Classified & Photo Ads

Buyer and Seller Feedback - To Tyler

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Harlan Kruger

04-01-2009 17:52:15




Report to Moderator

Tyler, I will gladly email you photos of the broken rear end housing, The only people ive had issues with on this board were deerevalley over a set of rear B wheels, which they got a 100% refund and kept the wheels, and Aaron about the 620 pto which I refunded $125. I cant do better than that, I could have been like rick and said as is as is as is as is as is, but Im not like that, My ebay feedback speaks for itself, its not 100% but its 99.8 going on 99.9% perfect, with as many transactions as I do, id said thats a pretty good record. Sorry if I came off strong on you, I was just wondering where it was all coming from. email me at kruger_implement@yahoo.com and I will gladly email you everything wrong with that 70, I didnt buy it to part it out, I bought it to go with my 60 Lp standard to have a pair, I wanted it because standards with the 23.1x26 tires and centers are rare and I liked the other options it had. To be honest, the more I work on and notice on the tractor the less desireable it is to me, I would have rather paid $20,000 for one that was done than $5500 for this one. I do understand I bought it as is, but I also thought i bought it as described, he come right out and said "the power steering works fine" I have to use both hands to turn it, and when its just sitting at idle the wheels spin to the right all the way, I dont consider that working, I also dont consider a 3pt that is supposed to be in good shape, to have welded ends and mismatched lift arms, something that should have been obvious to anyone that has looked at a 3pt up close, Im sure you describe the tractors to the best of your ability, as do I, but if power-steering doesnt work, im not going to say that it does, etc. If you notice its always deerevalley and aaron that have negative things to say, To be honest, I think im done posting any messages on here, If I post anything deerevalley will be all over it, or theres always someone out there that will have something to say, Had Rick described it to me stating the power-steering didnt work, the rear housing was broken, the 3pt was mismatched and welded, the nosecone was rusted through, the front rims were incorrect, and on and on, I wouldnt have bought it. If you do have 23.1x26 rear centers, rims, and tires are $1000 per set, ill take every set you got, I guess I have $5500 in my set that ill just end up putting on my 60 lp standard now. I just shared what type of guy rick was is all. This will be one of my last posts, there is too much drama on this site that I dont need.

[Log in to Reply]   [No Email]
Aaron S.

04-01-2009 19:12:58




Report to Moderator
 Re: To Tyler in reply to Harlan Kruger, 04-01-2009 17:52:15  
Harlan, I want to make this short and simple. I agree with you that some of these things should have been brought to your attention on this 70.I want you to think back to the 620. You say, "Im sure you describe the tractors to the best of your ability, as do". Now I have alot of respect for you when it comes to your knowledge on 2 cylinders but if your going to tell me that you described that to the best of your knowledge then I really do have to call you a liar. I know you can do better than that and I'm sure you do in most cases. I guess if I was thinking I would have asked for $700 back, but if I remember right you bashed me for asking for the $150. In all reality I feel like I bought a $1500 tractor that was described to be in the $2500-$3000 range. I guess when your trying to make a living you do what you have to do, but it doesnt make it right. I don't really think we have anythign to discuss but my Email is also open. Aaron

[Log in to Reply]  [No Email]
Harlan Kruger

04-01-2009 19:42:35




Report to Moderator
 Re: To Aaron S in reply to Aaron S., 04-01-2009 19:12:58  
Aaron, the words of the day seem to be AS-IS WHERE IS Dont they, You bashed me before I ever brought up your name, I told you right from the begining, Im not going to pay for parts that didnt need to be replaced, It didnt need the clutches, shaft etc, It only needed the housing so I refunded half of your request, Its not my fault the guy wouldnt sell just the casting. By cashing the check, you are more or less accepting the offer I would say, Also like everyone else says, Why didnt you come look at it, they dont seem to care that i was nearly 800 miles away from the 70 lp standard, so you should have came and looked at the 620 according to their opinions as well. If that was only a $1500 tractor, you seemed to think it was worth $3500 shortly after you had it for sale on the photo ads, If you didnt like it when you got it, you could have easily parted it out and made a very healthy profit on it, 620/630 parts are quite valuable. What else do you want me to do????? its been over a year, I could have done to you like rick told me, as is where is tough crap, I didnt, I sent you what I felt was fair, I at least replied to your emails and calls, Rick has done absolutely nothing. My feeling is no matter what I do, im not going to please you over a $125 issue, I tried, Had you really not been ok with everything, you would have not retracted the feedback, I thought it was all squared away, but I guess not, All I can do is say that I did what I thought was fair, I didnt have to do anything at all and not even gave you a penny back, So if you want to keep bashing me, and keep bashing me, and keep bashing me, Go ahead, but both you and I know we agreed to the terms. There is nothing else I can do, If you dont want to buy from me anymore, im sorry, but thats your choice, but I at least made an effort to make it right, thats a lot more than so me people will or would do. Good Day..Harlan Kruger PS, I will be copy and pasting this to the feedback so everyone can read it.

[Log in to Reply]  [No Email]
Who says

04-04-2009 06:19:37




Report to Moderator
 Re: To Aaron S in reply to Harlan Kruger, 04-01-2009 19:42:35  
Well im sure if he sold it for 3500 he put some time and money in to it. Doesnt take a genius to figure that one out! Grow up!!!



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy